-
Enhanced dispersion in intermittent multiphase flow
Authors:
Joachim Mathiesen,
Gaute Linga,
Marek Misztal,
Francois Renard,
Tanguy Le Borgne
Abstract:
Transport in multiphase flow through porous media plays a central role in many biological, geological, and engineered systems. Here, we use numerical simulations of transport in immiscible two-phase flow to investigate dispersion in multiphase porous media flow. While dispersion in the main flow direction is similar to that of a single-phase flow and is governed by the porous media structure, we f…
▽ More
Transport in multiphase flow through porous media plays a central role in many biological, geological, and engineered systems. Here, we use numerical simulations of transport in immiscible two-phase flow to investigate dispersion in multiphase porous media flow. While dispersion in the main flow direction is similar to that of a single-phase flow and is governed by the porous media structure, we find that transverse dispersion exhibits fundamentally different dynamics. The repeated activation and deactivation of different flow pathways under the effect of capillary forces lead to intermittent flow patterns, strongly enhancing dispersion. We show that the transverse dispersion is controlled by the length scale of fluid clusters, and thus inversely proportional to the square root of the Bond number, the ratio of the force driving the flow and the surface tension. This result leads to a new scaling law relating multiphase flow dynamics to transport properties, opening a range of fundamental and engineering applications.
△ Less
Submitted 25 November, 2021; v1 submitted 22 September, 2021;
originally announced September 2021.
-
A minimal model for the onset of slip pulses in frictional rupture
Authors:
Kjetil Thøgersen,
Einat Aharonov,
Fabian Barras,
François Renard
Abstract:
We present a minimal one-dimensional model for the transition from crack-like to pulse-like propagation of frictional rupture. In its non-dimensional form, the model depends on only two free parameters: the non-dimensional pre-stress and an elasticity ratio that accounts for the finite height of the system. The model contains stable slip pulse solutions for slip boundary conditions, and unstable s…
▽ More
We present a minimal one-dimensional model for the transition from crack-like to pulse-like propagation of frictional rupture. In its non-dimensional form, the model depends on only two free parameters: the non-dimensional pre-stress and an elasticity ratio that accounts for the finite height of the system. The model contains stable slip pulse solutions for slip boundary conditions, and unstable slip pulse solutions for stress boundary conditions. Results demonstrate that the existence of pulse-like ruptures requires only elastic relaxation and redistribution of initial pre-stress. The novelty of our findings is that pulse-like propagation along frictional interfaces is a generic elastic feature, whose existence is not sensitive to particular rate- or slip-dependencies of dynamic friction.
△ Less
Submitted 11 March, 2021; v1 submitted 21 December, 2020;
originally announced December 2020.
-
Frictional anisotropy of 3D-printed fault surfaces
Authors:
Tom Vincent-Dospital,
Alain Steyer,
François Renard,
Renaud Toussaint
Abstract:
The surface morphology of faults controls the spatial anisotropy of their frictional properties, and hence their mechanical stability. Such anisotropy is only rarely studied in seismology models of fault slip, although it might be paramount to understand the seismic rupture in particular areas, notably where slip occurs in a direction different from that of the main striations of the fault. To qua…
▽ More
The surface morphology of faults controls the spatial anisotropy of their frictional properties, and hence their mechanical stability. Such anisotropy is only rarely studied in seismology models of fault slip, although it might be paramount to understand the seismic rupture in particular areas, notably where slip occurs in a direction different from that of the main striations of the fault. To quantify how the anisotropy of fault surfaces affects the friction coefficient during sliding, we sheared synthetic fault planes made of plaster of Paris. These fault planes were produced by 3D-printing real striated fault surfaces whose 3D roughness was measured in the field at spatial scales from millimeters to meters. Here, we show how the 3D-printing technology can help for the study of frictional slip. Results show that fault anisotropy controls the coefficient of static friction, with the friction coefficient along the striations being three to four times smaller than the friction coefficient along the direction perpendicular to the striations. This is true both at the meter and the millimeter scales. The anisotropy in friction and the average coefficient of static friction are also shown to decrease with the normal stress applied to the faults, as a result of the increased surface wear under increased loading.
△ Less
Submitted 8 February, 2021; v1 submitted 10 November, 2020;
originally announced November 2020.
-
A linear stability analysis of compressible hybrid lattice Boltzmann methods
Authors:
Florian Renard,
Gauthier Wissocq,
Jean-François Boussuge,
Pierre Sagaut
Abstract:
An original spectral study of the compressible hybrid lattice Boltzmann method (HLBM) on standard lattice is proposed. In this framework, the mass and momentum equations are addressed using the lattice Boltzmann method (LBM), while finite difference (FD) schemes solve an energy equation. Both systems are coupled with each other thanks to an ideal gas equation of state. This work aims at answering…
▽ More
An original spectral study of the compressible hybrid lattice Boltzmann method (HLBM) on standard lattice is proposed. In this framework, the mass and momentum equations are addressed using the lattice Boltzmann method (LBM), while finite difference (FD) schemes solve an energy equation. Both systems are coupled with each other thanks to an ideal gas equation of state. This work aims at answering some questions regarding the numerical stability of such models, which strongly depends on the choice of numerical parameters. To this extent, several one- and two-dimensional HLBM classes based on different energy variables, formulation (primitive or conservative), collision terms and numerical schemes are scrutinized. Once appropriate corrective terms introduced, it is shown that all continuous HLBM classes recover the Navier-Stokes Fourier behavior in the linear approximation. However, striking differences arise between HLBM classes when their discrete counterparts are analysed. Multiple instability mechanisms arising at relatively high Mach number are pointed out and two exhaustive stabilization strategies are introduced: (1) decreasing the time step by changing the reference temperature $T_{ref}$ and (2) introducing a controllable numerical dissipation $σ$ via the collision operator. A complete parametric study reveals that only HLBM classes based on the primitive and conservative entropy equations are found usable for compressible applications. Finally, an innovative study of the macroscopic modal composition of the entropy classes is conducted. Through this study, two original phenomena, referred to as shear-to-entropy and entropy-to-shear transfers, are highlighted and confirmed on standard two-dimensional test cases.
△ Less
Submitted 15 June, 2020;
originally announced June 2020.
-
Improved compressible Hybrid Lattice Boltzmann Method on standard lattice for subsonic and supersonic flows
Authors:
Florian Renard,
Yongliang Feng,
Jean-François Boussuge,
Pierre Sagaut
Abstract:
A D2Q9 Hybrid Lattice Boltzmann Method (HLBM) is proposed for the simulation of both compressible subsonic and supersonic flows. This HLBM is an extension of the model of Feng et al: [12], which has been found, via different test cases, to be unstable for supersonic regimes. The improvements consist of: (1) a new discretization of the lattice closure correction term making possible to properly sim…
▽ More
A D2Q9 Hybrid Lattice Boltzmann Method (HLBM) is proposed for the simulation of both compressible subsonic and supersonic flows. This HLBM is an extension of the model of Feng et al: [12], which has been found, via different test cases, to be unstable for supersonic regimes. The improvements consist of: (1) a new discretization of the lattice closure correction term making possible to properly simulate supersonic flows, (2) a corrected viscous stress tensor that takes into account polyatomic gases, and (3) a novel discretization of the viscous heat production term fitting with the regularized formalism. The result is a hybrid method that resolves the mass and momentum equations with an LBM algorithm, and resolves the entropy-based energy equation with a finite volume method. This approach fully recovers the physics of the Navier-Stokes-Fourier equations with the ideal gas equation of state, and is valid from subsonic to supersonic regimes. It is then successfully assessed with both smooth flows and flows involving shocks. The proposed model is shown to be an efficient, accurate, and robust alternative to classic Navier-Stokes methods for the simulation of compressible flows
△ Less
Submitted 4 November, 2020; v1 submitted 10 February, 2020;
originally announced February 2020.
-
A minimal model for slow, sub-Rayleigh, super-shear and unsteady rupture propagation along homogeneously loaded frictional interfaces
Authors:
Kjetil Thøgersen,
Henrik Andersen Sveinsson,
David Skålid Amundsen,
Julien Scheibert,
François Renard,
Anders Malthe-Sørenssen
Abstract:
In nature and experiments, a large variety of rupture speeds and front modes along frictional interfaces are observed. Here, we introduce a minimal model for the rupture of homogeneously loaded interfaces with velocity strengthening dynamic friction, containing only two dimensionless parameters; $\bar τ$ which governs the prestress, and $\bar α$ which is set by the dynamic viscosity. This model co…
▽ More
In nature and experiments, a large variety of rupture speeds and front modes along frictional interfaces are observed. Here, we introduce a minimal model for the rupture of homogeneously loaded interfaces with velocity strengthening dynamic friction, containing only two dimensionless parameters; $\bar τ$ which governs the prestress, and $\bar α$ which is set by the dynamic viscosity. This model contains a large variety of front types, including slow fronts, sub-Rayleigh fronts, super-shear fronts, slip pulses, cracks, arresting fronts and fronts that alternate between arresting and propagating phases. Our results indicate that this wide range of front types is an inherent property of frictional systems with velocity strengthening branches.
△ Less
Submitted 21 July, 2019; v1 submitted 14 June, 2019;
originally announced June 2019.
-
Self-similar distributions of fluid velocity and stress heterogeneity in a dissolving porous limestone
Authors:
Gaute Linga,
Joachim Mathiesen,
François Renard
Abstract:
In a porous rock, the spatial distribution of the pore space induces a strong heterogeneity in fluid flow rates and in the stress distribution in the rock mass. If the rock microstructure evolves through time, for example by dissolution, fluid flow and stress will evolve accordingly. Here, we consider a core sample of porous limestone that has undergone several steps of dissolution. Based on 3D X-…
▽ More
In a porous rock, the spatial distribution of the pore space induces a strong heterogeneity in fluid flow rates and in the stress distribution in the rock mass. If the rock microstructure evolves through time, for example by dissolution, fluid flow and stress will evolve accordingly. Here, we consider a core sample of porous limestone that has undergone several steps of dissolution. Based on 3D X-ray tomography scans, we calculate numerically the coupled system of fluid flow in the pore space and stress in the solid. We determine how the flow field affects the stress distribution both at the pore wall surface and in the bulk of the solid matrix. We show that, during dissolution, the heterogeneous stress evolves in a self-similar manner as the porosity is increased. Conversely, the fluid velocity shows a stretched exponential distribution. The scalings of these common master distributions offer a unified description of the porosity evolution, pore flow, and the heterogeneity in stress for a rock with evolving microstructure. Moreover, the probability density functions of stress invariants (mechanical pressure or von Mises stress) display heavy tails towards large stresses. If these results can be extended to other kinds of rocks, they provide an additional explanation of the sensitivity to failure of porous rocks under slight changes of stress.
△ Less
Submitted 26 February, 2019;
originally announced February 2019.
-
Stylolites: A review
Authors:
Renaud Toussaint,
E. Aharonov,
D. Koehn,
P. Gratier,
M. Ebner,
P. Baud,
A. Rolland,
F. Renard
Abstract:
Stylolites are ubiquitous geo-patterns observed in rocks in the upper crust, from geological reservoirs in sedimentary rocks to deformation zones, in folds, faults, and shear zones. These rough surfaces play a major role in the dissolution of rocks around stressed contacts, the transport of dissolved material and the precipitation in surrounding pores. Consequently, they play an active role in the…
▽ More
Stylolites are ubiquitous geo-patterns observed in rocks in the upper crust, from geological reservoirs in sedimentary rocks to deformation zones, in folds, faults, and shear zones. These rough surfaces play a major role in the dissolution of rocks around stressed contacts, the transport of dissolved material and the precipitation in surrounding pores. Consequently, they play an active role in the evolution of rock microstructures and rheological properties in the Earth's crust. They are observed individually or in networks, in proximity to fractures and joints, and in numerous geological settings. This review article deals with their geometrical and compositional characteristics and the factors leading to their genesis. The main questions this review focuses on are the following: How do they form? How can they be used to measure strain and formation stress? How do they control fluid flow in the upper crust? Geometrically, stylolites have fractal roughness, with fractal geometrical properties exhibiting typically three scaling regimes: a self-affine scaling with Hurst exponent 1.1+/-0.1 at small scale (up to tens or hundreds of microns), another one with Hurst exponent around 0.5 to 0.6 at intermediate scale (up to millimeters or centimeters), and in the case of sedimentary stylolites, a flat scaling at large scale. More complicated anisotropic scaling (scaling laws depending of the direction of the profile considered) is found in the case of tectonic stylolites. We report models based on first principles from physical chemistry and statistical physics, including a mechanical component for the free-energy associated with stress concentrations, and a precise tracking of the influence of grain-scale heterogeneities and disorder on the resulting (micro)structures. Experimental efforts to reproduce stylolites in the laboratory are also reviewed. We show that although micrometer-size stylolite teeth are obtained in laboratory experiments, teeth deforming numerous grains have not yet been obtained experimentally, which is understandable given the very long formation time of such geometries. Finally, the applications of stylolites as strain and stress markers, to determine paleostress magnitude are reviewed. We show that the scalings in stylolite heights and the crossover scale between these scalings can be used to determine the stress magnitude (its scalar value) perpendicular to the stylolite surface during the stylolite formation, and that the stress anisotropy in the stylolite plane can be determined for the case of tectonic stylolites. We also show that the crossover between medium (millimetric) scales and large (pluricentimetric) scales, in the case of sedimentary stylolites, provides a good marker for the total amount of dissolution, which is still valid even when the largest teeth start to dissolve -- which leads to the loss of information, since the total deformation is not anymore recorded in a single marker structure. We discuss the impact of the stylolites on the evolution of the transport properties of the hosting rock, and show that they promote a permeability increase parallel to the stylolites, whereas their effect on the permeability transverse to the stylolite can be negligible, or may reduce the permeability, depending on the development of the stylolite.
Highlights: Stylolite formation depends on rock composition and structure, stress and fluids. Stylolite geometry, fractal and self-affine properties, network structure, are investigated. The experiments and physics-based numerical models for their formation are reviewed. Stylolites can be used as markers of strain, paleostress orientation and magnitude. Stylolites impact transport properties, as function of maturity and flow direction.
△ Less
Submitted 30 October, 2018;
originally announced October 2018.
-
A 4D synchrotron X-ray tomography study of the formation of hydrocarbon migration pathways in heated organic-rich shale
Authors:
Hamed Panahi,
Maya Kobchenko,
Francois Renard,
Adriano Mazzini,
Julien Scheibert,
Dag Kristian Dysthe,
Bjorn Jamtveit,
Anders Malthe-Sørenssen,
Paul Meakin
Abstract:
Recovery of oil from oil shales and the natural primary migration of hydrocarbons are closely related processes that have received renewed interests in recent years because of the ever tightening supply of conventional hydrocarbons and the growing production of hydrocarbons from low permeability tight rocks. Quantitative models for conversion of kerogen into oil and gas and the timing of hydrocarb…
▽ More
Recovery of oil from oil shales and the natural primary migration of hydrocarbons are closely related processes that have received renewed interests in recent years because of the ever tightening supply of conventional hydrocarbons and the growing production of hydrocarbons from low permeability tight rocks. Quantitative models for conversion of kerogen into oil and gas and the timing of hydrocarbon generation have been well documented. However, lack of consensus about the kinetics of hydrocarbon formation in source rocks, expulsion timing and how the resulting hydrocarbons escape from or are retained in the source rocks motivates further investigation. In particular, many mechanisms for the transport of hydrocarbons from the source rocks in which they are generated into adjacent rocks with higher permeabilities and smaller capillary entry pressures have been proposed, and a better understanding of this complex process (primary migration) is needed. To characterize these processes it is imperative to use the latest technological advances. In this study, it is shown how insights into hydrocarbon migration in source rocks can be obtained by using sequential high resolution synchrotron X-ray tomography. Three-dimensional (3D) images of several immature "shale" samples were constructed at resolutions close to 5 micrometers. This is sufficient to resolve the source rock structure down to the grain level, but very fine grained silt particles, clay particles and colloids cannot be resolved. Samples used in this investigation came from the R-8 unit in the upper part of the Green River Shale, which is organic rich, varved, lacustrine marl formed in Eocene Lake Uinta, United States of America. One Green River Shale sample was heated in-situ up to 400°C as X-ray tomography images were recorded. The other samples were scanned before and after heating at 400°C. During the heating phase, the organic matter was decomposed, and gas was released. Gas expulsion from the low permeability shales was coupled with formation of microcracks. The main technical difficulty was numerical extraction of microcracks that have apertures in the 5 to 30 micrometer range (with 5 micrometers being the resolution limit) from a large 3D volume of X-ray attenuation data. The main goal of the work presented here is to develop a methodology to process these 3D data and image the cracks. This methodology is based on several levels of spatial filtering and automatic recognition of connected domains. Supportive petrographic and thermogravimetric data were an important complement to this study. An investigation of the strain field using two-dimensional image correlation analyses was also performed. As one application of the four-dimensional (4D, space + time) microtomography and the developed workflow, we show that fluid generation was accompanied by crack formation. Under different conditions, in the subsurface, this might provide paths for primary migration.
△ Less
Submitted 10 January, 2014;
originally announced January 2014.
-
Multiscale non-adiabatic dynamics with radiative decay, case study on the post-ionization fragmentation of rare-gas tetramers
Authors:
Ivan Janeček,
Tomáš Janča,
Pavel Naar,
Frederic Renard,
René Kalus,
Florent X. Gadéa
Abstract:
In this supplementary material, we recollect, for reader's convenience, the general scheme of suggested multiscale model (Sec. 1), and basic informations about approaches used for pilot study: a detailed description of the interaction model (Sec. 2) and dynamical methods used for the dark dynamics step (Sec. 3) reported previously in two preceding studies [1, 2]. In addition, a detailed descriptio…
▽ More
In this supplementary material, we recollect, for reader's convenience, the general scheme of suggested multiscale model (Sec. 1), and basic informations about approaches used for pilot study: a detailed description of the interaction model (Sec. 2) and dynamical methods used for the dark dynamics step (Sec. 3) reported previously in two preceding studies [1, 2]. In addition, a detailed description of the treatment of radiative processes is also given (Sec. 4).
△ Less
Submitted 8 March, 2012; v1 submitted 17 February, 2012;
originally announced February 2012.
-
4D imaging of fracturing in organic-rich shales during heating
Authors:
Maya Kobchenko,
Hamed Panahi,
Francois Renard,
Dag Kristian Dysthe,
Anders Malthe-Sorenssen,
Adriano Mazzini,
Julien Scheibert,
Bjorn Jamtveit,
Paul Meakin
Abstract:
To better understand the mechanisms of fracture pattern development and fluid escape in low permeability rocks, we performed time-resolved in situ X-ray tomography imaging to investigate the processes that occur during the slow heating (from 60\degree; to 400\degree;C) of organic-rich Green River shale. At about 350\degree;C cracks nucleated in the sample, and as the temperature continued to incre…
▽ More
To better understand the mechanisms of fracture pattern development and fluid escape in low permeability rocks, we performed time-resolved in situ X-ray tomography imaging to investigate the processes that occur during the slow heating (from 60\degree; to 400\degree;C) of organic-rich Green River shale. At about 350\degree;C cracks nucleated in the sample, and as the temperature continued to increase, these cracks propagated parallel to shale bedding and coalesced, thus cutting across the sample. Thermogravimetry and gas chromatography revealed that the fracturing occurring at ~350\degree;C was associated with significant mass loss and release of light hydrocarbons generated by the decomposition of immature organic matter. Kerogen decomposition is thought to cause an internal pressure build up sufficient to form cracks in the shale, thus providing pathways for the outgoing hydrocarbons. We show that a 2D numerical model based on this idea qualitatively reproduces the experimentally observed dynamics of crack nucleation, growth and coalescence, as well as the irregular outlines of the cracks. Our results provide a new description of fracture pattern formation in low permeability shales.
△ Less
Submitted 27 March, 2012; v1 submitted 12 January, 2011;
originally announced January 2011.
-
Characterization of Fault Roughness at Various Scales: Implications of Three-Dimensional High Resolution Topography Measurements
Authors:
Thibault Candela,
François Renard,
Michel Bouchon,
David Marsan,
Jean Schmittbuhl,
Christophe Voisin
Abstract:
Accurate description of the topography of active faults surfaces represents an important geophysical issue because this topography is strongly related to the stress distribution along fault planes, and therefore to processes implicated in earthquake nucleation, propagation, and arrest. With the recent development of Light Detection And Ranging (LIDAR) apparatus, it is now possible to measure acc…
▽ More
Accurate description of the topography of active faults surfaces represents an important geophysical issue because this topography is strongly related to the stress distribution along fault planes, and therefore to processes implicated in earthquake nucleation, propagation, and arrest. With the recent development of Light Detection And Ranging (LIDAR) apparatus, it is now possible to measure accurately the 3D topography of rough surfaces with a comparable resolution in all directions, both at field and laboratory scales. In the present study, we have investigated the scaling properties including possible anisotropy properties of several outcrops of two natural fault surfaces (Vuache strike-slip fault, France, and Magnola normal fault, Italy) in limestones.
△ Less
Submitted 7 October, 2008;
originally announced October 2008.
-
Textural properties of synthetic nano-calcite produced by hydrothermal carbonation of calcium hydroxide
Authors:
German Montes-Hernandez,
Alejandro Fernandez-Martinez,
L. Charlet,
Delphine Tisserand,
F. Renard
Abstract:
The hydrothermal carbonation of calcium hydroxide (Ca(OH)2) at high pressure of CO2 (initial PCO2 1/4 55 bar) and moderate to high temperature (30 and 90 1C) was used to synthesize fine particles of calcite. This method allows a high carbonation efficiency (about 95% of Ca(OH)2-CaCO3 conversion), a significant production rate (48 kg/m3 h) and high purity of product (about 96%). However, the vari…
▽ More
The hydrothermal carbonation of calcium hydroxide (Ca(OH)2) at high pressure of CO2 (initial PCO2 1/4 55 bar) and moderate to high temperature (30 and 90 1C) was used to synthesize fine particles of calcite. This method allows a high carbonation efficiency (about 95% of Ca(OH)2-CaCO3 conversion), a significant production rate (48 kg/m3 h) and high purity of product (about 96%). However, the various initial physicochemical conditions have a strong influence on the crystal size and surface area of the synthesized calcite crystals. The present study is focused on the estimation of the textural properties of synthesized calcite (morphology, specific surface area, average particle size, particle size distribution and particle size evolution with reaction time), using Rietveld refinements of X-ray diffraction (XRD) spectra, Brunauer-Emmett-Teller (BET) measurements, and scanning electron microscope (SEM) and transmission electron microscope (TEM) observations. This study demonstrate that the pressure, the temperature and the dissolved quantity of CO2 have a significant effect on the average particle size, specific surface area, initial rate of precipitation, and on the morphology of calcium carbonate crystals. In contrast, these PTx conditions used herein have an insignificant effect on the carbonation efficiency of Ca(OH)2. Finally, the results presented here demonstrate that nano-calcite crystals with high specific surface area (SBET 1/4 6-10m2/g) can be produced, with a high potential for industrial applications such as adsorbents and/or filler in papermaking industry.
△ Less
Submitted 14 May, 2008;
originally announced May 2008.
-
Evolution of seismic signals and slip patterns along subduction zones: insights from a friction lab scale experiment
Authors:
Christophe Voisin,
Jean-Robert Grasso,
Eric Larose,
François Renard
Abstract:
Continuous GPS and broadband seismic monitoring have revealed a variety of disparate slip patterns especially in shallow dipping subduction zones, among which regular earthquakes, slow slip events and silent quakes1,2. Slow slip events are sometimes accompanied by Non Volcanic Tremors (NVT), which origin remains unclear3, either related to fluid migration or to friction. The present understandin…
▽ More
Continuous GPS and broadband seismic monitoring have revealed a variety of disparate slip patterns especially in shallow dipping subduction zones, among which regular earthquakes, slow slip events and silent quakes1,2. Slow slip events are sometimes accompanied by Non Volcanic Tremors (NVT), which origin remains unclear3, either related to fluid migration or to friction. The present understanding of the whole menagerie of slip patterns is based upon numerical simulations imposing ad hoc values of the rate and state parameters a and b4-6 derived from the temperature dependence of a and b of a wet granite gouge7. Here we investigate the influence of the cumulative slip on the frictional and acoustic patterns of a lab scale subduction zone. Shallow loud earthquakes (stick-slip events), medium depth slow, deeper silent quakes (smooth sliding oscillations) and deepest steady-state creep (continuous sliding) are reproduced by the ageing of contact interface with cumulative displacement8. The Acoustic Emission evolves with cumulative displacement and interface ageing, following a trend from strong impulsive events, similar to earthquake seismic signals, to a collection of smaller amplitude and longer duration signals, similar to Non Volcanic Tremors. NVT emerge as the recollection of the local unstable behaviour of the contact interface globally evolving towards the stable sliding regime.
△ Less
Submitted 11 January, 2008;
originally announced January 2008.
-
Single-contact pressure solution creep on calcite monocrystals
Authors:
Sergei Zubtsov,
François Renard,
Jean-Pierre Gratier,
Dag Dysthe,
Vladimir Traskine
Abstract:
Pressure solution creep rates and interface structures have been measured by two methods on calcite single crystals. In the first kind of experiments, calcite monocrystals were indented at 40 degrees C for six weeks using ceramic indenters under stresses in the 50-200 MPa range in a saturated solution of calcite and in a calcite-saturated aqueous solution of NH4Cl. The deformation (depth of the…
▽ More
Pressure solution creep rates and interface structures have been measured by two methods on calcite single crystals. In the first kind of experiments, calcite monocrystals were indented at 40 degrees C for six weeks using ceramic indenters under stresses in the 50-200 MPa range in a saturated solution of calcite and in a calcite-saturated aqueous solution of NH4Cl. The deformation (depth of the hole below the indenter) is measured ex-situ at the end of the experiment. In the second type of experiment, calcite monocrystals were indented by spherical glass indenters for 200 hours under stresses in the 0-100 MPa range at room temperature in a saturated aqueous solution of calcite. The displacement of the indenter was continuously recorded using a specially constructed differential dilatometer. The experiments conducted in a calcite-saturated aqueous solution of NH4Cl show an enhanced indentation rate owing to the fairly high solubility of calcite in this solution. In contrast, the experiments conducted in a calcite-saturated aqueous solution show moderate indentation rate and the dry control experiments did not show any measurable deformation. The rate of calcite indentation is found to be inversely proportional to the indenter diameter, thus indicating that the process is diffusion-controlled. The microcracks in the dissolution region under the indenter dramatically enhance the rate of calcite indentation by a significant reduction of the distance of solute transport in the trapped fluid phase. This result indicates that care should be taken in extrapolating the kinetic data of pressure solution creep from one mineral to another.
△ Less
Submitted 4 January, 2008;
originally announced January 2008.
-
Growth of stylolite teeth patterns depends on normal stress and finite compaction
Authors:
Daniel Koehn,
François Renard,
Renaud Toussaint,
Cees Passchier
Abstract:
Stylolites are spectacular rough dissolution surfaces that are found in many rock types. Despite many studies, their genesis is still debated, particularly the time scales of their formation and the relationship between this time and their morphology. We developed a new discrete simulation technique to explore the dynamic growth of the stylolite roughness, starting from an initially flat dissolu…
▽ More
Stylolites are spectacular rough dissolution surfaces that are found in many rock types. Despite many studies, their genesis is still debated, particularly the time scales of their formation and the relationship between this time and their morphology. We developed a new discrete simulation technique to explore the dynamic growth of the stylolite roughness, starting from an initially flat dissolution surface. We demonstrate that the typical steep stylolite teeth geometry can accurately be modelled and reproduce natural patterns. The growth of the roughness takes place in two successive time regimes: i) an initial non-linear increase in roughness amplitude that follows a power-law in time up to ii) a critical time where the roughness amplitude saturates and stays constant.
△ Less
Submitted 4 January, 2008;
originally announced January 2008.
-
Influence of time, temperature, confining pressure and fluid content on the experimental compaction of spherical grains
Authors:
Magali Rossi,
Olivier Vidal,
Bernd Wunder,
François Renard
Abstract:
Theoretical models of compaction processes, such as for example intergranular pressure-solution (IPS), focus on deformation occurring at the contacts between spherical grains that constitute an aggregate. In order to investigate the applicability of such models, and to quantify the deformation of particles within an aggregate, isostatic experiments were performed in cold-sealed vessels on glass…
▽ More
Theoretical models of compaction processes, such as for example intergranular pressure-solution (IPS), focus on deformation occurring at the contacts between spherical grains that constitute an aggregate. In order to investigate the applicability of such models, and to quantify the deformation of particles within an aggregate, isostatic experiments were performed in cold-sealed vessels on glass sphere aggregates at 200 MPa confining pressure and 350 degrees C with varying amounts of fluid.
△ Less
Submitted 3 January, 2008;
originally announced January 2008.
-
Failure patterns caused by localized rise in pore-fluid overpressure and effective strength of rocks
Authors:
Alexander Rozhko,
Yuri Podladchikov,
François Renard
Abstract:
In order to better understand the interaction between pore-fluid overpressure and failure patterns in rocks we consider a porous elasto-plastic medium in which a laterally localized overpressure line source is imposed at depth below the free surface. We solve numerically the fluid filtration equation coupled to the gravitational force balance and poro-elasto-plastic rheology equations. Systemati…
▽ More
In order to better understand the interaction between pore-fluid overpressure and failure patterns in rocks we consider a porous elasto-plastic medium in which a laterally localized overpressure line source is imposed at depth below the free surface. We solve numerically the fluid filtration equation coupled to the gravitational force balance and poro-elasto-plastic rheology equations. Systematic numerical simulations, varying initial stress, intrinsic material properties and geometry, show the existence of five distinct failure patterns caused by either shear banding or tensile fracturing. The value of the critical pore-fluid overpressure at the onset of failure is derived from an analytical solution that is in excellent agreement with numerical simulations. Finally, we construct a phase-diagram that predicts the domains of the different failure patterns and at the onset of failure.
△ Less
Submitted 3 January, 2008;
originally announced January 2008.
-
Albite feldspar dissolution kinetics as a function of the Gibbs free energy at high pCO_2
Authors:
Roland Hellmann,
Damien Daval,
Delphine Tisserand,
François Renard
Abstract:
We are currently measuring the dissolution kinetics of albite feldspar at 100 deg C in the presence of high levels of dissolved CO_2 (pCO_2 = 9 MPa) as a function of the saturation state of the feldspar (Gibbs free energy of reaction, ΔG). The experiments are conducted using a flow through reactor, thereby allowing the dissolution reactions to occur at a fixed pH and at constant, but variable sa…
▽ More
We are currently measuring the dissolution kinetics of albite feldspar at 100 deg C in the presence of high levels of dissolved CO_2 (pCO_2 = 9 MPa) as a function of the saturation state of the feldspar (Gibbs free energy of reaction, ΔG). The experiments are conducted using a flow through reactor, thereby allowing the dissolution reactions to occur at a fixed pH and at constant, but variable saturation states. Preliminary results indicate that at far-from-equilibrium conditions, the dissolution kinetics of albite are defined by a rate plateau, with R \approx 5.0 x 10^{-10} mol m^{-2} s^{-1} at -70 < ΔG < -40 kJ mol^{-1}. At ΔG > -40 kJ mol^{-1}, the rates decrease sharply, revealing a strong inverse relation between the dissolution rate and free energy. Based on the experiments carried out to date, the dissolution rate-free energy data correspond to a highly non-linear and sigmoidal relation, in accord with recent studies.
△ Less
Submitted 3 January, 2008;
originally announced January 2008.
-
Variety of stylolites morphologies and statistical characterization of the amount of heterogeneities in the rock
Authors:
Alexandre Brouste,
François Renard,
Jean-Pierre Gratier,
Jean Schmittbuhl
Abstract:
The surface roughness of several stylolites in limestones was measured using high resolution laser profilometry. The 1D signals obtained were statistically analyzed to determine the scaling behavior and calculate a roughness exponent, also called Hurst exponent. Statistical methods based on the characterization of a single Hurst exponent imply strong assumptions on the mathematical characteristi…
▽ More
The surface roughness of several stylolites in limestones was measured using high resolution laser profilometry. The 1D signals obtained were statistically analyzed to determine the scaling behavior and calculate a roughness exponent, also called Hurst exponent. Statistical methods based on the characterization of a single Hurst exponent imply strong assumptions on the mathematical characteristics of the signal: the derivative of the signal (or local increments) should be stationary and have finite variance. The analysis of the measured stylolites show that these properties are not always verified simultaneously. The stylolite profiles show persistence and jumps and several stylolites are not regular, with alternating regular and irregular portions. A new statistical method is proposed here, based on a non-stationary but Gaussian model, to estimate the roughness of the profiles and quantify the heterogeneity of stylolites. This statistical method is based on two parameters: the local roughness (H) which describes the local amplitude of the stylolite, and the amount of irregularities on the signal (μ), which can be linked to the heterogeneities initially present in the rock before the stylolite formed. Using this technique, a classification of the stylolites in two families is proposed: those for which the morphology is homogeneous everywhere and those with alternating regular and irregular portions.
△ Less
Submitted 3 January, 2008;
originally announced January 2008.
-
Characterisation of hydraulic fractures in limestones using X-ray microtomography
Authors:
Francois Renard,
Dominique Bernard,
Jacques Desrues,
Erwan Plougonven,
Audrey Ougier-Simonin
Abstract:
Hydraulic tension fractures were produced in porous limestones using a specially designed hydraulic cell. The 3D geometry of the samples was imaged using X-ray computed microtomography before and after fracturation. Using these data, it was possible to estimate the permeability tensor of the core samples, extract the path of the rupture and compare it to the heterogeneities initially present in…
▽ More
Hydraulic tension fractures were produced in porous limestones using a specially designed hydraulic cell. The 3D geometry of the samples was imaged using X-ray computed microtomography before and after fracturation. Using these data, it was possible to estimate the permeability tensor of the core samples, extract the path of the rupture and compare it to the heterogeneities initially present in the rock.
△ Less
Submitted 3 January, 2008;
originally announced January 2008.
-
High resolution 3D laser scanner measurements of a strike-slip fault quantify its morphological anisotropy at all scales
Authors:
Francois Renard,
Christophe Voisin,
Davd Marsan,
Jean Schmittbuhl
Abstract:
The surface roughness of a recently exhumed strikeslip fault plane has been measured by three independent 3D portable laser scanners. Digital elevation models of several fault surface areas, from 1 m2 to 600 m2, have been measured at a resolution ranging from 5 mm to 80 mm. Out of plane height fluctuations are described by non-Gaussian distribution with exponential long range tails. Statistical…
▽ More
The surface roughness of a recently exhumed strikeslip fault plane has been measured by three independent 3D portable laser scanners. Digital elevation models of several fault surface areas, from 1 m2 to 600 m2, have been measured at a resolution ranging from 5 mm to 80 mm. Out of plane height fluctuations are described by non-Gaussian distribution with exponential long range tails. Statistical scaling analyses show that the striated fault surface exhibits self-affine scaling invariance with a small but significant directional morphological anisotropy that can be described by two scaling roughness exponents, H1 = 0.7 in the direction of slip and H2 = 0.8 perpendicular to the direction of slip.
△ Less
Submitted 3 January, 2008;
originally announced January 2008.
-
Numerical modeling of carbon dioxide sequestration on the rate of pressure solution creep in limestone: Preliminary results
Authors:
Francois Renard,
Elisabeth Gundersen,
Roland Hellmann,
Marielle Collombet,
Yvi Le Guen
Abstract:
When carbon dioxide (CO2) is injected into an aquifer or a depleted geological reservoir, its dissolution into solution results in acidification of the pore waters. As a consequence, the pore waters become more reactive, which leads to enhanced dissolution-precipitation processes and a modification of the mechanical and hydrological properties of the rock. This effect is especially important for…
▽ More
When carbon dioxide (CO2) is injected into an aquifer or a depleted geological reservoir, its dissolution into solution results in acidification of the pore waters. As a consequence, the pore waters become more reactive, which leads to enhanced dissolution-precipitation processes and a modification of the mechanical and hydrological properties of the rock. This effect is especially important for limestones given that the solubility and reactivity of carbonates is strongly dependent on pH and the partial pressure of CO2. The main mechanism that couples dissolution, precipitation and rock matrix deformation is commonly referred to as intergranular pressure solution creep (IPS) or pervasive pressure solution creep (PSC). This process involves dissolution at intergranular grain contacts subject to elevated stress, diffusion of dissolved material in an intergranular fluid, and precipitation in pore spaces subject to lower stress. This leads to an overall and pervasive reduction in porosity due to both grain indentation and precipitation in pore spaces. The percolation of CO2-rich fluids may influence on-going compaction due to pressure solution and can therefore potentially affect the reservoir and its long-term CO2 storage capacity. We aim at quantifying this effect by using a 2D numerical model to study the coupling between dissolution-precipitation processes, local mass transfer, and deformation of the rock over long time scales. We show that high partial pressures of dissolved CO2 (up to 30 MPa) significantly increase the rates of compaction by a factor of ~ 50 to ~ 75, and also result in a concomitant decrease in the viscosity of the rock matrix.
△ Less
Submitted 3 January, 2008;
originally announced January 2008.
-
Experimental microstylolites in quartz and modelling of natural stylolitic structures
Authors:
Jean-Pierre Gratier,
Laurent Muquet,
Riad Hassani,
Francois Renard
Abstract:
Experimental microstylolites have been observed at stressed contacts between quartz grains loaded for several weeks in the presence of an aqueous silica solution, at 350 8C and 50 MPa of differential stress. Stereoscopic analysis of pairs of SEM images yielded a digital elevation model of the surface of the microstylolites. Fourier analyses of these microstylolites reveal a self-affine roughness…
▽ More
Experimental microstylolites have been observed at stressed contacts between quartz grains loaded for several weeks in the presence of an aqueous silica solution, at 350 8C and 50 MPa of differential stress. Stereoscopic analysis of pairs of SEM images yielded a digital elevation model of the surface of the microstylolites. Fourier analyses of these microstylolites reveal a self-affine roughness (with a roughness exponent H of 1.2). Coupled with observations of close interactions between dissolution pits and stylolitic peaks, these data illustrate a possible mechanism for stylolite formation. The complex geometry of stylolite surfaces is imposed by the interplay between the development of dissolution peaks in preferential locations (fast dissolution pits) and the mechanical properties of the solid-fluid-solid interfaces. Simple mechanical modeling expresses the crucial competition that could rule the development of microstylolites: (i) a stress-related process, modeled in terms of the stiffness of springs that activate the heterogeneous dissolution rates of the solid interface, promotes the deflection. In parallel, (ii) the strength of the solid interface, modeled in terms of the stiffness of a membrane, is equivalent to a surface tension that limits the deflection and opposes its development. The modeling produces stylolitic surfaces with characteristic geometries varying from conical to columnar when both the effect of dissolution-rate heterogeneity and the strength properties of the rock are taken into account. A self-affine roughness exponent (Hz1.2) measured on modeled surfaces is comparable with natural stylolites at small length scale and experimental microstylolites.
△ Less
Submitted 3 January, 2008;
originally announced January 2008.
-
Thermal imaging on simulated faults during frictional sliding
Authors:
Karen Mair,
François Renard,
Olav Gundersen
Abstract:
Heating during frictional sliding is a major component of the energy budget of earthquakes and represents a potential weakening mechanism. It is therefore important to investigate how heat dissipates during sliding on simulated faults. We present results from laboratory friction experiments where a halite (NaCl) slider held under constant load is dragged across a coarse substrate. Surface evolut…
▽ More
Heating during frictional sliding is a major component of the energy budget of earthquakes and represents a potential weakening mechanism. It is therefore important to investigate how heat dissipates during sliding on simulated faults. We present results from laboratory friction experiments where a halite (NaCl) slider held under constant load is dragged across a coarse substrate. Surface evolution and frictional resistance are recorded. Heat emission at the sliding surface is monitored using an infra-red camera. We demonstrate a link between plastic deformations of halite and enhanced heating characterized by transient localized heat spots. When sand 'gouge' is added to the interface, heating is more diffuse. Importantly, when strong asperities concentrate deformation, significantly more heat is produced locally. In natural faults such regions could be nucleation patches for melt production and hence potentially initiate weakening during earthquakes at much smaller sliding velocities or shear stress than previously thought.
△ Less
Submitted 3 January, 2008;
originally announced January 2008.
-
Rhombohedral calcite precipitation from CO2-H2O-Ca(OH)2 slurry under supercritical and gas CO2 media
Authors:
German Montes-Hernandez,
François Renard,
Nicolas Geoffroy,
Laurent Charlet,
Jacques Pironon
Abstract:
The formation of solid calcium carbonate (CaCO3) from aqueous solutions or slurries containing calcium and carbon dioxide (CO2) is a complex process of considerable importance in the ecological, geochemical and biological areas. Moreover, the demand for powdered CaCO3 has increased considerably recently in various fields of industry. The aim of this study was therefore to synthesize fine particl…
▽ More
The formation of solid calcium carbonate (CaCO3) from aqueous solutions or slurries containing calcium and carbon dioxide (CO2) is a complex process of considerable importance in the ecological, geochemical and biological areas. Moreover, the demand for powdered CaCO3 has increased considerably recently in various fields of industry. The aim of this study was therefore to synthesize fine particles of calcite with controlled morphology by hydrothermal carbonation of calcium hydroxide at high CO2 pressure (initial PCO2=55 bar) and at moderate and high temperature (30 and 90 degrees C). The morphology of precipitated particles was identified by transmission electron microscopy (TEM/EDS) and scanning electron microscopy (SEM/EDS). In addition, an X-ray diffraction analysis was performed to investigate the carbonation efficiency and purity of the solid product. Carbonation of dispersed calcium hydroxide in the presence of supercritical (PT=90 bar, T=90 degrees C) or gaseous (PT=55 bar, T=30 degrees C) CO2 led to the precipitation of sub-micrometric isolated particles (<1$μ$m) and micrometric agglomerates (<5$μ$m) of calcite. For this study, the carbonation efficiency (Ca(OH)2-CaCO3 conversion) was not significantly affected by PT conditions after 24 h of reaction. In contrast, the initial rate of calcium carbonate precipitation increased from 4.3 mol/h in the "90bar-90 degrees C" system to 15.9 mol/h in the "55bar-30 degrees C" system. The use of high CO2 pressure may therefore be desirable for increasing the production rate of CaCO3, carbonation efficiency and purity, to approximately 48 kg/m3h, 95% and 96.3%, respectively in this study. The dissipated heat for this exothermic reaction was estimated by calorimetry to be -32 kJ/mol in the "90bar-90 degrees C" system and -42 kJ/mol in the "55bar-30 degrees C" system.
△ Less
Submitted 3 January, 2008;
originally announced January 2008.
