-
Applicability of Ideal Gas Law in the Air-bearing of Hard Drives
Authors:
Roshan Mathew Tom,
Sukumar Rajauria,
Qing Dai
Abstract:
This report evaluates the applicability of the ideal gas law in the pressurized air-bearing of hard disk drives when calculating the relative humidity. We employ a semi-analytical numerical method that solves vapor-liquid equilibrium using the Redlich-Kwong and Peng-Robinson equation of state to calculate the saturation pressure of water. The deviation from the ideal gas law is quantified and exam…
▽ More
This report evaluates the applicability of the ideal gas law in the pressurized air-bearing of hard disk drives when calculating the relative humidity. We employ a semi-analytical numerical method that solves vapor-liquid equilibrium using the Redlich-Kwong and Peng-Robinson equation of state to calculate the saturation pressure of water. The deviation from the ideal gas law is quantified and examined through saturation pressure isotherms. We find that at low temperatures, lighter gases such as helium show little deviation from the ideal gas law, whereas heavier gases such as nitrogen deviate significantly. As temperature increases, the difference between the gases decreases. The results suggest that in areas of low temperature, the non-ideal nature of gases must be taken into account.
△ Less
Submitted 12 August, 2024;
originally announced August 2024.
-
Precise nanoscale temperature mapping in operational microelectronic devices by use of a phase change material
Authors:
Qilong Cheng,
Sukumar Rajauria,
Erhard Schreck,
Robert Smith,
Na Wang,
Jim Reiner,
Qing Dai,
David Bogy
Abstract:
The microelectronics industry is pushing the fundamental limit on the physical size of individual elements to produce faster and more powerful integrated chips. These chips have nanoscale features that dissipate power resulting in nanoscale hotspots leading to device failures. To understand the reliability impact of the hotspots, the device needs to be tested under the actual operating conditions.…
▽ More
The microelectronics industry is pushing the fundamental limit on the physical size of individual elements to produce faster and more powerful integrated chips. These chips have nanoscale features that dissipate power resulting in nanoscale hotspots leading to device failures. To understand the reliability impact of the hotspots, the device needs to be tested under the actual operating conditions. Therefore, the development of high-resolution thermometry techniques is required to understand the heat dissipation processes during the device operation. Recently, several thermometry techniques have been proposed,such as radiation thermometry, thermocouple based contact thermometry, scanning thermal microscopy (SThM), scanning transmission electron microscopy (STEM) and transition based threshold thermometers. However, most of these techniques have limitations including the need for extensive calibration, perturbation of the actual device temperature, low throughput, and the use of ultra-high vacuum. Here, we present a facile technique, which uses a thin film contact thermometer based on the phase change material Ge2Sb2Te5, to precisely map thermal contours from the nanoscale to the microscale. Ge2Sb2Te5 undergoes a crystalline transition at Tg with large changes in its electric conductivity, optical reflectivity and density. Using this approach, we map the surface temperature of a nanowire and an embedded micro-heater on the same chip where the scales of the temperature contours differ by three orders of magnitude. The spatial resolution can be as high as 20 nanometers thanks to the continuous nature of the thin film.
△ Less
Submitted 19 November, 2020;
originally announced November 2020.
-
Electrostatically tunable adhesion in a high speed sliding interface
Authors:
Sukumar Rajauria,
Oscar Ruiz,
Sripathi V. Canchi,
Erhard Schreck,
Qing Dai
Abstract:
Contact hysteresis between sliding interfaces is a widely observed phenomenon from macro- to nano- scale sliding interfaces. Most of such studies are done using an atomic force microscope (AFM) where the sliding speed is a few μm/s. Here, we present a unique study on stiction between the head-disk interface of commercially available hard disk drives, wherein vertical clearance between the head and…
▽ More
Contact hysteresis between sliding interfaces is a widely observed phenomenon from macro- to nano- scale sliding interfaces. Most of such studies are done using an atomic force microscope (AFM) where the sliding speed is a few μm/s. Here, we present a unique study on stiction between the head-disk interface of commercially available hard disk drives, wherein vertical clearance between the head and the disk is of the same order as in various AFM based fundamental studies, but with a sliding speed that is nearly six orders of magnitude higher. We demonstrate that although the electrostatic force (DC or AC voltage) is an attractive force, the AC voltage induced out-of-plane oscillation of the head with respect to disk is able to suppress completely the contact hysteresis.
△ Less
Submitted 29 November, 2017;
originally announced November 2017.
-
High-speed discrimination and sorting of sub-micron particles using a microfluidic device
Authors:
Sukumar Rajauria,
Christopher Axline,
Claudia Gottstein,
Andrew N. Cleland
Abstract:
The size- and fluorescence-based sorting of micro- and nano-scale particles suspended in fluid presents a significant and important challenge for both sample analysis and for manufacturing of nanoparticle-based products. Here we demonstrate a disposable microfluidic particle sorter that enables high-throughput, on-demand counting and binary sorting of sub-micron particles and cells, using either f…
▽ More
The size- and fluorescence-based sorting of micro- and nano-scale particles suspended in fluid presents a significant and important challenge for both sample analysis and for manufacturing of nanoparticle-based products. Here we demonstrate a disposable microfluidic particle sorter that enables high-throughput, on-demand counting and binary sorting of sub-micron particles and cells, using either fluorescence or an electrically-based determination of particle size. Size-based sorting uses a resistive pulse sensor integrated on-chip, while fluorescence-based discrimination is achieved using on-the-fly optical image capture and analysis. Following detection and analysis, the individual particles are deflected using a pair of piezoelectric actuators, directing the particles into one of two desired output channels; the main flow goes into a third waste channel. The integrated system can achieve sorting fidelities of better than 98\%, and the mechanism can successfully count and actuate, on demand, more than 60,000 particles/min.
△ Less
Submitted 4 December, 2014;
originally announced December 2014.
-
Porous Superhydrophobic Membranes: Hydrodynamic Anomaly in Oscillating Flows
Authors:
Sukumar Rajauria,
O. Ozsun,
J. Lawall,
Victor Yakhot,
Kamil L. Ekinci
Abstract:
We have fabricated and characterized a novel superhydrophobic system, a mesh-like porous superhydrophobic membrane with solid area fraction $Φ_s$, which can maintain intimate contact with outside air and water reservoirs simultaneously. Oscillatory hydrodynamic measurements on porous superhydrophobic membranes as a function of $Φ_s$ reveal surprising effects. The hydrodynamic mass oscillating in-p…
▽ More
We have fabricated and characterized a novel superhydrophobic system, a mesh-like porous superhydrophobic membrane with solid area fraction $Φ_s$, which can maintain intimate contact with outside air and water reservoirs simultaneously. Oscillatory hydrodynamic measurements on porous superhydrophobic membranes as a function of $Φ_s$ reveal surprising effects. The hydrodynamic mass oscillating in-phase with the membranes stays constant for $0.9\leΦ_s\le1$, but drops precipitously for $Φ_s < 0.9$. The viscous friction shows a similar drop after a slow initial decrease proportional to $Φ_s$. We attribute these effects to the percolation of a stable Knudsen layer of air at the interface.
△ Less
Submitted 5 August, 2011; v1 submitted 29 July, 2011;
originally announced July 2011.
