-
Detecting Acoustic Blackbody Radiation with an Optomechanical Antenna
Authors:
Robinjeet Singh,
Thomas P. Purdy
Abstract:
Nanomechanical systems are generally embedded in a macroscopic environment where the sources of thermal noise are difficult to pinpoint. We engineer a silicon nitride membrane optomechanical resonator such that its thermal noise is acoustically driven by a spatially well-defined remote macroscopic bath. This bath acts as an acoustic blackbody emitting and absorbing acoustic radiation through the s…
▽ More
Nanomechanical systems are generally embedded in a macroscopic environment where the sources of thermal noise are difficult to pinpoint. We engineer a silicon nitride membrane optomechanical resonator such that its thermal noise is acoustically driven by a spatially well-defined remote macroscopic bath. This bath acts as an acoustic blackbody emitting and absorbing acoustic radiation through the silicon substrate. Our optomechanical system acts as a sensitive detector for the blackbody temperature and for photoacoustic imaging. We demonstrate that the nanomechanical mode temperature is governed by the blackbody temperature and not by the local material temperature of the resonator. Our work presents a route to mitigate self-heating effects in optomechanical thermometry and other quantum optomechanics experiments, as well as acoustic communication in quantum information.
△ Less
Submitted 15 September, 2020; v1 submitted 21 November, 2019;
originally announced November 2019.
-
Observation of Optomechanical Quantum Correlations at Room Temperature
Authors:
T. P. Purdy,
K. E. Grutter,
K. Srinivasan,
J. M. Taylor
Abstract:
By shining laser light through a nanomechanical beam, we measure the beam's thermally driven vibrations and perturb its motion with optical forces at a level dictated by the Heisenberg measurement-disturbance uncertainty relation. Such quantum backaction is typically difficult to observe at room temperature where the motion driven by optical quantum intensity fluctuations is many orders of magnitu…
▽ More
By shining laser light through a nanomechanical beam, we measure the beam's thermally driven vibrations and perturb its motion with optical forces at a level dictated by the Heisenberg measurement-disturbance uncertainty relation. Such quantum backaction is typically difficult to observe at room temperature where the motion driven by optical quantum intensity fluctuations is many orders of magnitude smaller than the thermal motion. We demonstrate a cross-correlation technique to distinguish optically driven motion from thermally driven motion, observing this quantum backaction signature up to room temperature. While it is often difficult to absolutely calibrate optical detection, we use the scale of the quantum correlations, which is determined by fundamental constants, to gauge the size of thermal motion, demonstrating a path towards absolute thermometry with quantum mechanically calibrated ticks.
△ Less
Submitted 18 May, 2016;
originally announced May 2016.
-
Laser cooling of a micromechanical membrane to the quantum backaction limit
Authors:
R. W. Peterson,
T. P. Purdy,
N. S. Kampel,
R. W. Andrews,
P. -L. Yu,
K. W. Lehnert,
C. A. Regal
Abstract:
The radiation pressure of light can act to damp and cool the vibrational motion of a mechanical resonator. In understanding the quantum limits of this cooling, one must consider the effect of shot noise fluctuations on the final thermal occupation. In optomechanical sideband cooling in a cavity, the finite Stokes Raman scattering defined by the cavity linewidth combined with shot noise fluctuation…
▽ More
The radiation pressure of light can act to damp and cool the vibrational motion of a mechanical resonator. In understanding the quantum limits of this cooling, one must consider the effect of shot noise fluctuations on the final thermal occupation. In optomechanical sideband cooling in a cavity, the finite Stokes Raman scattering defined by the cavity linewidth combined with shot noise fluctuations dictates a quantum backaction limit, analogous to the Doppler limit of atomic laser cooling. In our work we sideband cool to the quantum backaction limit by using a micromechanical membrane precooled in a dilution refrigerator. Monitoring the optical sidebands allows us to directly observe the mechanical object come to thermal equilibrium with the optical bath.
△ Less
Submitted 13 October, 2015;
originally announced October 2015.
-
Optomechanical Raman-Ratio Thermometry
Authors:
T. P. Purdy,
P. -L. Yu,
N. S. Kampel,
R. W. Peterson,
K. Cicak,
R. W. Simmonds,
C. A. Regal
Abstract:
The temperature dependence of the asymmetry between Stokes and anti-Stokes Raman scattering can be exploited for self-calibrating, optically-based thermometry. In the context of cavity optomechanics, we observe the cavity-enhanced scattering of light interacting with the standing-wave drumhead modes of a silicon nitride membrane mechanical resonator. The ratio of the amplitude of Stokes to anti-St…
▽ More
The temperature dependence of the asymmetry between Stokes and anti-Stokes Raman scattering can be exploited for self-calibrating, optically-based thermometry. In the context of cavity optomechanics, we observe the cavity-enhanced scattering of light interacting with the standing-wave drumhead modes of a silicon nitride membrane mechanical resonator. The ratio of the amplitude of Stokes to anti-Stokes scattered light is used to measure temperatures of optically-cooled mechanical modes down to the level of a few vibrational quanta. We demonstrate that the Raman-ratio technique is able to measure the physical temperature of our device over a range extending from cryogenic temperatures to within an order of magnitude of room temperature.
△ Less
Submitted 27 June, 2014;
originally announced June 2014.
-
Tensile strained $In_{x}Ga_{1-x}P$ membranes for cavity optomechanics
Authors:
G. D. Cole,
P. -L. Yu,
C. Gärtner,
K. Siquans,
R. Moghadas Nia,
J. Schmöle,
J. Hoelscher-Obermaier,
T. P. Purdy,
W. Wieczorek,
C. A. Regal,
M. Aspelmeyer
Abstract:
We investigate the optomechanical properties of tensile-strained ternary InGaP nanomembranes grown on GaAs. This material system combines the benefits of highly strained membranes based on stoichiometric silicon nitride, with the unique properties of thin-film semiconductor single crystals, as previously demonstrated with suspended GaAs. Here we employ lattice mismatch in epitaxial growth to impar…
▽ More
We investigate the optomechanical properties of tensile-strained ternary InGaP nanomembranes grown on GaAs. This material system combines the benefits of highly strained membranes based on stoichiometric silicon nitride, with the unique properties of thin-film semiconductor single crystals, as previously demonstrated with suspended GaAs. Here we employ lattice mismatch in epitaxial growth to impart an intrinsic tensile strain to a monocrystalline thin film (approximately 30 nm thick). These structures exhibit mechanical quality factors of 2*10^6 or beyond at room temperature and 17 K for eigenfrequencies up to 1 MHz, yielding Q*f products of 2*10^12 Hz for a tensile stress of ~170 MPa. Incorporating such membranes in a high finesse Fabry-Perot cavity, we extract an upper limit to the total optical loss (including both absorption and scatter) of 40 ppm at 1064 nm and room temperature. Further reductions of the In content of this alloy will enable tensile stress levels of 1 GPa, with the potential for a significant increase in the Q*f product, assuming no deterioration in the mechanical loss at this composition and strain level. This materials system is a promising candidate for the integration of strained semiconductor membrane structures with low-loss semiconductor mirrors and for realizing stacks of membranes for enhanced optomechanical coupling.
△ Less
Submitted 31 March, 2014;
originally announced April 2014.
-
Bidirectional and efficient conversion between microwave and optical light
Authors:
R. W. Andrews,
R. W. Peterson,
T. P. Purdy,
K. Cicak,
R. W. Simmonds,
C. A. Regal,
K. W. Lehnert
Abstract:
Converting low-frequency electrical signals into much higher frequency optical signals has enabled modern communications networks to leverage both the strengths of microfabricated electrical circuits and optical fiber transmission, allowing information networks to grow in size and complexity. A microwave-to-optical converter in a quantum information network could provide similar gains by linking q…
▽ More
Converting low-frequency electrical signals into much higher frequency optical signals has enabled modern communications networks to leverage both the strengths of microfabricated electrical circuits and optical fiber transmission, allowing information networks to grow in size and complexity. A microwave-to-optical converter in a quantum information network could provide similar gains by linking quantum processors via low-loss optical fibers and enabling a large-scale quantum network. However, no current technology can convert low-frequency microwave signals into high-frequency optical signals while preserving their fragile quantum state. For this demanding application, a converter must provide a near-unitary transformation between different frequencies; that is, the ideal transformation is reversible, coherent, and lossless. Here we demonstrate a converter that reversibly, coherently, and efficiently links the microwave and optical portions of the electromagnetic spectrum. We use our converter to transfer classical signals between microwave and optical light with conversion efficiencies of ~10%, and achieve performance sufficient to transfer quantum states if the device were further precooled from its current 4 kelvin operating temperature to below 40 millikelvin. The converter uses a mechanically compliant membrane to interface optical light with superconducting microwave circuitry, and this unique combination of technologies may provide a way to link distant nodes of a quantum information network.
△ Less
Submitted 11 August, 2014; v1 submitted 19 October, 2013;
originally announced October 2013.
-
Strong Optomechanical Squeezing of Light
Authors:
T. P. Purdy,
P. -L. Yu,
R. W. Peterson,
N. S. Kampel,
C. A. Regal
Abstract:
We create squeezed light by exploiting the quantum nature of the mechanical interaction between laser light and a membrane mechanical resonator embedded in an optical cavity. The radiation pressure shot noise (fluctuating optical force from quantum laser amplitude noise) induces resonator motion well above that of thermally driven motion. This motion imprints a phase shift on the laser light, henc…
▽ More
We create squeezed light by exploiting the quantum nature of the mechanical interaction between laser light and a membrane mechanical resonator embedded in an optical cavity. The radiation pressure shot noise (fluctuating optical force from quantum laser amplitude noise) induces resonator motion well above that of thermally driven motion. This motion imprints a phase shift on the laser light, hence correlating the amplitude and phase noise, a consequence of which is optical squeezing. We experimentally demonstrate strong and continuous optomechanical squeezing of 1.7 +/- 0.2 dB below the shot noise level. The peak level of squeezing measured near the mechanical resonance is well described by a model whose parameters are independently calibrated and that includes thermal motion of the membrane with no other classical noise sources.
△ Less
Submitted 21 October, 2013; v1 submitted 5 June, 2013;
originally announced June 2013.
-
Observation of Radiation Pressure Shot Noise on a Macroscopic Object
Authors:
T. P. Purdy,
R. W. Peterson,
C. A. Regal
Abstract:
The quantum mechanics of position measurement of a macroscopic object is typically inaccessible because of strong coupling to the environment and classical noise. Here we monitor a mechanical resonator subject to an increasingly strong continuous position measurement and observe a quantum mechanical backaction force that rises in accordance with the Heisenberg uncertainty limit. For our optically-…
▽ More
The quantum mechanics of position measurement of a macroscopic object is typically inaccessible because of strong coupling to the environment and classical noise. Here we monitor a mechanical resonator subject to an increasingly strong continuous position measurement and observe a quantum mechanical backaction force that rises in accordance with the Heisenberg uncertainty limit. For our optically-based position measurements, the backaction takes the form of a fluctuating radiation pressure from the Poisson-distributed photons in the coherent measurement field, termed radiation pressure shot noise. We demonstrate a backaction force that is comparable in magnitude to the thermal forces in our system. Additionally, we observe a temporal correlation between fluctuations in the radiation force and in the position of the resonator.
△ Less
Submitted 17 February, 2013; v1 submitted 27 September, 2012;
originally announced September 2012.
-
Cavity optomechanics with Si3N4 membranes at cryogenic temperatures
Authors:
T. P. Purdy,
R. W. Peterson,
P. -L. Yu,
C. A. Regal
Abstract:
We describe a cryogenic cavity-optomechanical system that combines Si3N4 membranes with a mechanically-rigid Fabry-Perot cavity. The extremely high quality-factor frequency products of the membranes allow us to cool a MHz mechanical mode to a phonon occupation of less than 10, starting at a bath temperature of 5 kelvin. We show that even at cold temperatures thermally-occupied mechanical modes of…
▽ More
We describe a cryogenic cavity-optomechanical system that combines Si3N4 membranes with a mechanically-rigid Fabry-Perot cavity. The extremely high quality-factor frequency products of the membranes allow us to cool a MHz mechanical mode to a phonon occupation of less than 10, starting at a bath temperature of 5 kelvin. We show that even at cold temperatures thermally-occupied mechanical modes of the cavity elements can be a limitation, and we discuss methods to reduce these effects sufficiently to achieve ground state cooling. This promising new platform should have versatile uses for hybrid devices and searches for radiation pressure shot noise.
△ Less
Submitted 31 August, 2012;
originally announced August 2012.
-
Cavity-aided magnetic-resonance microscopy of atoms in optical lattices
Authors:
Tom P. Purdy,
Nathan Brahms,
Daniel W. C. Brooks,
Thierry Botter,
Dan M. Stamper-Kurn
Abstract:
Magnetic resonance imaging (MRI) is a powerful technique for investigating the microscopic properties and dynamics of physical systems. In this work we demonstrate state-sensitive MRI of ultracold atoms in an optical lattice. Single-shot spatial resolution is 120 nm, well below the lattice spacing, and number sensitivity is +/-2.4 for 150 atoms on a single site, well below Poissonian atom-number f…
▽ More
Magnetic resonance imaging (MRI) is a powerful technique for investigating the microscopic properties and dynamics of physical systems. In this work we demonstrate state-sensitive MRI of ultracold atoms in an optical lattice. Single-shot spatial resolution is 120 nm, well below the lattice spacing, and number sensitivity is +/-2.4 for 150 atoms on a single site, well below Poissonian atom-number fluctuations. We achieve this by combining high-spatial-resolution control over the atomic spin using an atom chip, together with nearly quantum-limited spin measurement, obtained by dispersively coupling the atoms to light in a high-finesse optical cavity. The MRI is minimally disruptive of the atoms' internal state, preserving the magnetisation of the gas for subsequent experiments. Using this technique, we observe the nonequilibrium transport dynamics of the atoms among individual lattice sites. We see the atom cloud initially expand ballistically, followed by the onset of interaction-inhibited transport.
△ Less
Submitted 10 May, 2011; v1 submitted 6 December, 2010;
originally announced December 2010.
-
Tunable Cavity Optomechanics with Ultracold Atoms
Authors:
T. P. Purdy,
D. W. C. Brooks,
T. Botter,
N. Brahms,
Z. -Y. Ma,
D. M. Stamper-Kurn
Abstract:
We present an atom-chip-based realization of quantum cavity optomechanics with cold atoms localized within a Fabry-Perot cavity. Effective sub-wavelength positioning of the atomic ensemble allows for tuning the linear and quadratic optomechanical coupling parameters, varying the sensitivity to the displacement and strain of a compressible gaseous cantilever. We observe effects of such tuning on ca…
▽ More
We present an atom-chip-based realization of quantum cavity optomechanics with cold atoms localized within a Fabry-Perot cavity. Effective sub-wavelength positioning of the atomic ensemble allows for tuning the linear and quadratic optomechanical coupling parameters, varying the sensitivity to the displacement and strain of a compressible gaseous cantilever. We observe effects of such tuning on cavity optical nonlinearity and optomechanical frequency shifts, providing their first characterization in the quadratic-coupling regime.
△ Less
Submitted 21 May, 2010;
originally announced May 2010.
-
Collimated, single-pass atom source from a pulsed alkali metal dispenser for laser-cooling experiments
Authors:
Kevin L. Moore,
Thomas P. Purdy,
Kater W. Murch,
Sabrina Leslie,
Subhadeep Gupta,
Dan M. Stamper-Kurn
Abstract:
We have developed an improved scheme for loading atoms into a magneto-optical trap (MOT) from a directed alkali metal dispenser in < 10^-10 torr ultra-high vacuum conditions. A current-driven dispenser was surrounded with a cold absorbing "shroud" held at < 0 C, pumping rubidium atoms not directed into the MOT. This nearly eliminates background alkali atoms and reduces the detrimental rise in pr…
▽ More
We have developed an improved scheme for loading atoms into a magneto-optical trap (MOT) from a directed alkali metal dispenser in < 10^-10 torr ultra-high vacuum conditions. A current-driven dispenser was surrounded with a cold absorbing "shroud" held at < 0 C, pumping rubidium atoms not directed into the MOT. This nearly eliminates background alkali atoms and reduces the detrimental rise in pressure normally associated with these devices. The system can be well-described as a current-controlled, rapidly-switched, two-temperature thermal beam, and was used to load a MOT with 3 x 10^8 atoms.
△ Less
Submitted 5 November, 2004; v1 submitted 1 September, 2004;
originally announced September 2004.
