-
Reconstruction and Performance Evaluation of FASER's Emulsion Detector at the LHC
Authors:
FASER Collaboration,
Roshan Mammen Abraham,
Xiaocong Ai,
Saul Alonso Monsalve,
John Anders,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Jeremy Atkinson,
Florian U. Bernlochner,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Angela Burger,
Franck Cadou,
Roberto Cardella,
David W. Casper,
Charlotte Cavanagh,
Xin Chen,
Kohei Chinone,
Dhruv Chouhan,
Andrea Coccaro,
Stephane Débieu,
Ansh Desai,
Sergey Dmitrievsky
, et al. (99 additional authors not shown)
Abstract:
This paper presents the reconstruction and performance evaluation of the FASER$ν$ emulsion detector, which aims to measure interactions from neutrinos produced in the forward direction of proton-proton collisions at the CERN Large Hadron Collider. The detector, composed of tungsten plates interleaved with emulsion films, records charged particles with sub-micron precision. A key challenge arises f…
▽ More
This paper presents the reconstruction and performance evaluation of the FASER$ν$ emulsion detector, which aims to measure interactions from neutrinos produced in the forward direction of proton-proton collisions at the CERN Large Hadron Collider. The detector, composed of tungsten plates interleaved with emulsion films, records charged particles with sub-micron precision. A key challenge arises from the extremely high track density environment, reaching $\mathcal{O}(10^5)$ tracks per cm$^2$. To address this, dedicated alignment techniques and track reconstruction algorithms have been developed, building on techniques from previous experiments and introducing further optimizations. The performance of the detector is studied by evaluating the single-film efficiency, position and angular resolution, and the impact parameter distribution of reconstructed vertices. The results demonstrate that an alignment precision of 0.3 micrometers and robust track and vertex reconstruction are achieved, enabling accurate neutrino measurements in the TeV energy range.
△ Less
Submitted 2 May, 2025; v1 submitted 17 April, 2025;
originally announced April 2025.
-
Prospects and Opportunities with an upgraded FASER Neutrino Detector during the HL-LHC era: Input to the EPPSU
Authors:
FASER Collaboration,
Roshan Mammen Abraham,
Xiaocong Ai,
Saul Alonso-Monsalve,
John Anders,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Jeremy Atkinson,
Florian U. Bernlochner,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Angela Burger,
Franck Cadoux,
Roberto Cardella,
David W. Casper,
Charlotte Cavanagh,
Xin Chen,
Dhruv Chouhan,
Sebastiani Christiano,
Andrea Coccaro,
Stephane Débieux,
Monica D'Onofrio,
Ansh Desai
, et al. (93 additional authors not shown)
Abstract:
The FASER experiment at CERN has opened a new window in collider neutrino physics by detecting TeV-energy neutrinos produced in the forward direction at the LHC. Building on this success, this document outlines the scientific case and design considerations for an upgraded FASER neutrino detector to operate during LHC Run 4 and beyond. The proposed detector will significantly enhance the neutrino p…
▽ More
The FASER experiment at CERN has opened a new window in collider neutrino physics by detecting TeV-energy neutrinos produced in the forward direction at the LHC. Building on this success, this document outlines the scientific case and design considerations for an upgraded FASER neutrino detector to operate during LHC Run 4 and beyond. The proposed detector will significantly enhance the neutrino physics program by increasing event statistics, improving flavor identification, and enabling precision measurements of neutrino interactions at the highest man-made energies. Key objectives include measuring neutrino cross sections, probing proton structure and forward QCD dynamics, testing lepton flavor universality, and searching for beyond-the-Standard Model physics. Several detector configurations are under study, including high-granularity scintillator-based tracking calorimeters, high-precision silicon tracking layers, and advanced emulsion-based detectors for exclusive event reconstruction. These upgrades will maximize the physics potential of the HL-LHC, contribute to astroparticle physics and QCD studies, and serve as a stepping stone toward future neutrino programs at the Forward Physics Facility.
△ Less
Submitted 25 March, 2025;
originally announced March 2025.
-
First Measurement of the $ν_e$ and $ν_μ$ Interaction Cross Sections at the LHC with FASER's Emulsion Detector
Authors:
FASER Collaboration,
Roshan Mammen Abraham,
John Anders,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Jeremy Atkinson,
Florian U. Bernlochner,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Angela Burger,
Franck Cadoux,
Roberto Cardella,
David W. Casper,
Charlotte Cavanagh,
Xin Chen,
Andrea Coccaro,
Stephane Debieux,
Monica D'Onofrio,
Ansh Desai,
Sergey Dmitrievsky,
Sinead Eley,
Yannick Favre,
Deion Fellers
, et al. (80 additional authors not shown)
Abstract:
This paper presents the first results of the study of high-energy electron and muon neutrino charged-current interactions in the FASER$ν$ emulsion/tungsten detector of the FASER experiment at the LHC. A subset of the FASER$ν$ volume, which corresponds to a target mass of 128.6~kg, was exposed to neutrinos from the LHC $pp$ collisions with a centre-of-mass energy of 13.6~TeV and an integrated lumin…
▽ More
This paper presents the first results of the study of high-energy electron and muon neutrino charged-current interactions in the FASER$ν$ emulsion/tungsten detector of the FASER experiment at the LHC. A subset of the FASER$ν$ volume, which corresponds to a target mass of 128.6~kg, was exposed to neutrinos from the LHC $pp$ collisions with a centre-of-mass energy of 13.6~TeV and an integrated luminosity of 9.5 fb$^{-1}$. Applying stringent selections requiring electrons with reconstructed energy above 200~GeV, four electron neutrino interaction candidate events are observed with an expected background of $0.025^{+0.015}_{-0.010}$, leading to a statistical significance of 5.2$σ$. This is the first direct observation of electron neutrino interactions at a particle collider. Eight muon neutrino interaction candidate events are also detected, with an expected background of $0.22^{+0.09}_{-0.07}$, leading to a statistical significance of 5.7$σ$. The signal events include neutrinos with energies in the TeV range, the highest-energy electron and muon neutrinos ever detected from an artificial source. The energy-independent part of the interaction cross section per nucleon is measured over an energy range of 560--1740 GeV (520--1760 GeV) for $ν_e$ ($ν_μ$) to be $(1.2_{-0.7}^{+0.8}) \times 10^{-38}~\mathrm{cm}^{2}\,\mathrm{GeV}^{-1}$ ($(0.5\pm0.2) \times 10^{-38}~\mathrm{cm}^{2}\,\mathrm{GeV}^{-1}$), consistent with Standard Model predictions. These are the first measurements of neutrino interaction cross sections in those energy ranges.
△ Less
Submitted 15 July, 2024; v1 submitted 19 March, 2024;
originally announced March 2024.
-
The FASER Detector
Authors:
FASER Collaboration,
Henso Abreu,
Elham Amin Mansour,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Florian Bernlochner,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Franck Cadoux,
David W. Casper,
Charlotte Cavanagh,
Xin Chen,
Andrea Coccaro,
Olivier Crespo-Lopez,
Stephane Debieux,
Monica D'Onofrio,
Liam Dougherty,
Candan Dozen,
Abdallah Ezzat,
Yannick Favre,
Deion Fellers,
Jonathan L. Feng,
Didier Ferrere
, et al. (72 additional authors not shown)
Abstract:
FASER, the ForwArd Search ExpeRiment, is an experiment dedicated to searching for light, extremely weakly-interacting particles at CERN's Large Hadron Collider (LHC). Such particles may be produced in the very forward direction of the LHC's high-energy collisions and then decay to visible particles inside the FASER detector, which is placed 480 m downstream of the ATLAS interaction point, aligned…
▽ More
FASER, the ForwArd Search ExpeRiment, is an experiment dedicated to searching for light, extremely weakly-interacting particles at CERN's Large Hadron Collider (LHC). Such particles may be produced in the very forward direction of the LHC's high-energy collisions and then decay to visible particles inside the FASER detector, which is placed 480 m downstream of the ATLAS interaction point, aligned with the beam collisions axis. FASER also includes a sub-detector, FASER$ν$, designed to detect neutrinos produced in the LHC collisions and to study their properties. In this paper, each component of the FASER detector is described in detail, as well as the installation of the experiment system and its commissioning using cosmic-rays collected in September 2021 and during the LHC pilot beam test carried out in October 2021. FASER will start taking LHC collision data in 2022, and will run throughout LHC Run 3.
△ Less
Submitted 23 July, 2022;
originally announced July 2022.
-
The tracking detector of the FASER experiment
Authors:
FASER Collaboration,
Henso Abreu,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Florian Bernlochner,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Franck Cadoux,
David W. Casper,
Charlotte Cavanagh,
Xin Chen,
Andrea Coccaro,
Olivier Crespo-Lopez,
Sergey Dmitrievsky,
Monica D'Onofrio,
Candan Dozen,
Abdallah Ezzat,
Yannick Favre,
Deion Fellers,
Jonathan L. Feng,
Didier Ferrere,
Stephen Gibson,
Sergio Gonzalez-Sevilla
, et al. (55 additional authors not shown)
Abstract:
FASER is a new experiment designed to search for new light weakly-interacting long-lived particles (LLPs) and study high-energy neutrino interactions in the very forward region of the LHC collisions at CERN. The experimental apparatus is situated 480 m downstream of the ATLAS interaction-point aligned with the beam collision axis. The FASER detector includes four identical tracker stations constru…
▽ More
FASER is a new experiment designed to search for new light weakly-interacting long-lived particles (LLPs) and study high-energy neutrino interactions in the very forward region of the LHC collisions at CERN. The experimental apparatus is situated 480 m downstream of the ATLAS interaction-point aligned with the beam collision axis. The FASER detector includes four identical tracker stations constructed from silicon microstrip detectors. Three of the tracker stations form a tracking spectrometer, and enable FASER to detect the decay products of LLPs decaying inside the apparatus, whereas the fourth station is used for the neutrino analysis. The spectrometer has been installed in the LHC complex since March 2021, while the fourth station is not yet installed. FASER will start physics data taking when the LHC resumes operation in early 2022. This paper describes the design, construction and testing of the tracking spectrometer, including the associated components such as the mechanics, readout electronics, power supplies and cooling system.
△ Less
Submitted 31 May, 2022; v1 submitted 2 December, 2021;
originally announced December 2021.
-
The trigger and data acquisition system of the FASER experiment
Authors:
FASER Collaboration,
Henso Abreu,
Elham Amin Mansour,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Florian Bernlochner,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Franck Cadoux,
David Casper,
Charlotte Cavanagh,
Xin Chen,
Andrea Coccaro,
Stephane Debieux,
Sergey Dmitrievsky,
Monica D'Onofrio,
Candan Dozen,
Yannick Favre,
Deion Fellers,
Jonathan L. Feng,
Didier Ferrere,
Enrico Gamberini,
Edward Karl Galantay
, et al. (59 additional authors not shown)
Abstract:
The FASER experiment is a new small and inexpensive experiment that is placed 480 meters downstream of the ATLAS experiment at the CERN LHC. FASER is designed to capture decays of new long-lived particles, produced outside of the ATLAS detector acceptance. These rare particles can decay in the FASER detector together with about 500-1000 Hz of other particles originating from the ATLAS interaction…
▽ More
The FASER experiment is a new small and inexpensive experiment that is placed 480 meters downstream of the ATLAS experiment at the CERN LHC. FASER is designed to capture decays of new long-lived particles, produced outside of the ATLAS detector acceptance. These rare particles can decay in the FASER detector together with about 500-1000 Hz of other particles originating from the ATLAS interaction point. A very high efficiency trigger and data acquisition system is required to ensure that the physics events of interest will be recorded. This paper describes the trigger and data acquisition system of the FASER experiment and presents performance results of the system acquired during initial commissioning.
△ Less
Submitted 10 January, 2022; v1 submitted 28 October, 2021;
originally announced October 2021.
-
First neutrino interaction candidates at the LHC
Authors:
FASER Collaboration,
Henso Abreu,
Yoav Afik,
Claire Antel,
Jason Arakawa,
Akitaka Ariga,
Tomoko Ariga,
Florian Bernlochner,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Franck Cadoux,
David W. Casper,
Charlotte Cavanagh,
Francesco Cerutti,
Xin Chen,
Andrea Coccaro,
Monica D'Onofrio,
Candan Dozen,
Yannick Favre,
Deion Fellers,
Jonathan L. Feng,
Didier Ferrere,
Stephen Gibson,
Sergio Gonzalez-Sevilla
, et al. (51 additional authors not shown)
Abstract:
FASER$ν$ at the CERN Large Hadron Collider (LHC) is designed to directly detect collider neutrinos for the first time and study their cross sections at TeV energies, where no such measurements currently exist. In 2018, a pilot detector employing emulsion films was installed in the far-forward region of ATLAS, 480 m from the interaction point, and collected 12.2 fb$^{-1}$ of proton-proton collision…
▽ More
FASER$ν$ at the CERN Large Hadron Collider (LHC) is designed to directly detect collider neutrinos for the first time and study their cross sections at TeV energies, where no such measurements currently exist. In 2018, a pilot detector employing emulsion films was installed in the far-forward region of ATLAS, 480 m from the interaction point, and collected 12.2 fb$^{-1}$ of proton-proton collision data at a center-of-mass energy of 13 TeV. We describe the analysis of this pilot run data and the observation of the first neutrino interaction candidates at the LHC. This milestone paves the way for high-energy neutrino measurements at current and future colliders.
△ Less
Submitted 26 October, 2021; v1 submitted 13 May, 2021;
originally announced May 2021.
-
Simple and statistically sound recommendations for analysing physical theories
Authors:
Shehu S. AbdusSalam,
Fruzsina J. Agocs,
Benjamin C. Allanach,
Peter Athron,
Csaba Balázs,
Emanuele Bagnaschi,
Philip Bechtle,
Oliver Buchmueller,
Ankit Beniwal,
Jihyun Bhom,
Sanjay Bloor,
Torsten Bringmann,
Andy Buckley,
Anja Butter,
José Eliel Camargo-Molina,
Marcin Chrzaszcz,
Jan Conrad,
Jonathan M. Cornell,
Matthias Danninger,
Jorge de Blas,
Albert De Roeck,
Klaus Desch,
Matthew Dolan,
Herbert Dreiner,
Otto Eberhardt
, et al. (50 additional authors not shown)
Abstract:
Physical theories that depend on many parameters or are tested against data from many different experiments pose unique challenges to statistical inference. Many models in particle physics, astrophysics and cosmology fall into one or both of these categories. These issues are often sidestepped with statistically unsound ad hoc methods, involving intersection of parameter intervals estimated by mul…
▽ More
Physical theories that depend on many parameters or are tested against data from many different experiments pose unique challenges to statistical inference. Many models in particle physics, astrophysics and cosmology fall into one or both of these categories. These issues are often sidestepped with statistically unsound ad hoc methods, involving intersection of parameter intervals estimated by multiple experiments, and random or grid sampling of model parameters. Whilst these methods are easy to apply, they exhibit pathologies even in low-dimensional parameter spaces, and quickly become problematic to use and interpret in higher dimensions. In this article we give clear guidance for going beyond these procedures, suggesting where possible simple methods for performing statistically sound inference, and recommendations of readily-available software tools and standards that can assist in doing so. Our aim is to provide any physicists lacking comprehensive statistical training with recommendations for reaching correct scientific conclusions, with only a modest increase in analysis burden. Our examples can be reproduced with the code publicly available at https://doi.org/10.5281/zenodo.4322283.
△ Less
Submitted 11 April, 2022; v1 submitted 17 December, 2020;
originally announced December 2020.
-
Track Finding at Belle II
Authors:
Valerio Bertacchi,
Tadeas Bilka,
Nils Braun,
Giulia Casarosa,
Luigi Corona,
Sam Cunliffe,
Filippo Dattola,
Gaetano De Marino,
Michael De Nuccio,
Giacomo De Pietro,
Thanh Van Dong,
Giulio Dujany,
Patrick Ecker,
Michael Eliachevitch,
Tristan Fillinger,
Oliver Frost,
Rudolf Fruehwirth,
Uwe Gebauer,
Alexander Glazov,
Nicolas Gosling,
Aiqiang Guo,
Thomas Hauth,
Martin Heck,
Mateusz Kaleta,
Jakub Kandra
, et al. (33 additional authors not shown)
Abstract:
This paper describes the track-finding algorithm that is used for event reconstruction in the Belle II experiment operating at the SuperKEKB B-factory in Tsukuba, Japan. The algorithm is designed to balance the requirements of a high efficiency to find charged particles with a good track parameter resolution, a low rate of spurious tracks, and a reasonable demand on CPU resources. The software is…
▽ More
This paper describes the track-finding algorithm that is used for event reconstruction in the Belle II experiment operating at the SuperKEKB B-factory in Tsukuba, Japan. The algorithm is designed to balance the requirements of a high efficiency to find charged particles with a good track parameter resolution, a low rate of spurious tracks, and a reasonable demand on CPU resources. The software is implemented in a flexible, modular manner and employs a diverse selection of global and local track-finding algorithms to achieve an optimal performance.
△ Less
Submitted 26 November, 2021; v1 submitted 27 March, 2020;
originally announced March 2020.
-
Implementation of GENFIT2 as an experiment independent track-fitting framework
Authors:
Tadeas Bilka,
Nils Braun,
Thomas Hauth,
Thomas Kuhr,
Lia Lavezzi,
Felix Metzner,
Stephan Paul,
Elisabetta Prencipe,
Markus Prim,
Johannes Rauch,
James Ritman,
Tobias Schlueter,
Stefano Spataro
Abstract:
The GENFIT toolkit, initially developed at the Technische Universitaet Muenchen, has been extended and modified to be more general and user-friendly. The new GENFIT, called GENFIT2, provides track representation, track-fitting algorithms and graphic visualization of tracks and detectors, and it can be used for any experiment that determines parameters of charged particle trajectories from spacial…
▽ More
The GENFIT toolkit, initially developed at the Technische Universitaet Muenchen, has been extended and modified to be more general and user-friendly. The new GENFIT, called GENFIT2, provides track representation, track-fitting algorithms and graphic visualization of tracks and detectors, and it can be used for any experiment that determines parameters of charged particle trajectories from spacial coordinate measurements. Based on general Kalman filter routines, it can perform extrapolations of track parameters and covariance matrices. It also provides interfaces to Millepede II for alignment purposes, and RAVE for the vertex finder. Results of an implementation of GENFIT2 in basf2 and PandaRoot software frameworks are presented here.
△ Less
Submitted 13 February, 2019; v1 submitted 12 February, 2019;
originally announced February 2019.
-
B2BII - Data conversion from Belle to Belle II
Authors:
Moritz Gelb,
Thomas Keck,
Markus Prim,
Hulya Atmacan,
Jochen Gemmler,
Ryosuke Itoh,
Bastian Kronenbitter,
Thomas Kuhr,
Matic Lubej,
Felix Metzner,
Chanseok Park,
Seokhee Park,
Christian Pulvermacher,
Martin Ritter,
Anze Zupanc
Abstract:
We describe the conversion of simulated and recorded data by the Belle experiment to the Belle~II format with the software package \texttt{b2bii}. It is part of the Belle~II Analysis Software Framework. This allows the validation of the analysis software and the improvement of analyses based on the recorded Belle dataset using newly developed analysis tools.
We describe the conversion of simulated and recorded data by the Belle experiment to the Belle~II format with the software package \texttt{b2bii}. It is part of the Belle~II Analysis Software Framework. This allows the validation of the analysis software and the improvement of analyses based on the recorded Belle dataset using newly developed analysis tools.
△ Less
Submitted 28 September, 2018;
originally announced October 2018.
-
An algorithm for quantifying dependence in multivariate data sets
Authors:
Michael Feindt,
Michael Prim
Abstract:
We describe an algorithm to quantify dependence in a multivariate data set. The algorithm is able to identify any linear and non-linear dependence in the data set by performing a hypothesis test for two variables being independent. As a result we obtain a reliable measure of dependence.
In high energy physics understanding dependencies is especially important in multidimensional maximum likeliho…
▽ More
We describe an algorithm to quantify dependence in a multivariate data set. The algorithm is able to identify any linear and non-linear dependence in the data set by performing a hypothesis test for two variables being independent. As a result we obtain a reliable measure of dependence.
In high energy physics understanding dependencies is especially important in multidimensional maximum likelihood analyses. We therefore describe the problem of a multidimensional maximum likelihood analysis applied on a multivariate data set with variables that are dependent on each other. We review common procedures used in high energy physics and show that general dependence is not the same as linear correlation and discuss their limitations in practical application.
Finally we present the tool CAT, which is able to perform all reviewed methods in a fully automatic mode and creates an analysis report document with numeric results and visual review.
△ Less
Submitted 27 September, 2012; v1 submitted 4 July, 2012;
originally announced July 2012.
-
Belle II Technical Design Report
Authors:
T. Abe,
I. Adachi,
K. Adamczyk,
S. Ahn,
H. Aihara,
K. Akai,
M. Aloi,
L. Andricek,
K. Aoki,
Y. Arai,
A. Arefiev,
K. Arinstein,
Y. Arita,
D. M. Asner,
V. Aulchenko,
T. Aushev,
T. Aziz,
A. M. Bakich,
V. Balagura,
Y. Ban,
E. Barberio,
T. Barvich,
K. Belous,
T. Bergauer,
V. Bhardwaj
, et al. (387 additional authors not shown)
Abstract:
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been pr…
▽ More
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector.
△ Less
Submitted 1 November, 2010;
originally announced November 2010.
