Showing 1–11 of 11 results for author: Polosa, A D

A Demonstration of Slowed Electron ${\bf E} \times {\bf B}$ Drift for PTOLEMY

Authors: M. Farino, A. Tan, A. Apponi, M. Betti, M. Borghesi, A. Casale, O. Castellano, G. Cavoto, L. Cecchini, E. Celasco, W. Chung, A. G. Cocco, A. Colijn, B. Corcione, N. D'Ambrosio, N. de Groot, S. el Morabit, A. Esposito, M. Faverzani, A. D. Ferella, E. Ferri, L. Ficcadenti, S. Gamba, S. Gariazzo, H. Garrone , et al. (36 additional authors not shown)

Abstract: The novel transverse electromagnetic filtering system proposed by the PTOLEMY collaboration necessitates the precise control of $β$-decay electron motion via ${\bf E} \times {\bf B}$ drift. In particular, drift speed must be slowed substantially to contain electrons within the radio-frequency antenna region and accurately tune voltage potentials within the filter. This paper presents the experimen… ▽ More The novel transverse electromagnetic filtering system proposed by the PTOLEMY collaboration necessitates the precise control of $β$-decay electron motion via ${\bf E} \times {\bf B}$ drift. In particular, drift speed must be slowed substantially to contain electrons within the radio-frequency antenna region and accurately tune voltage potentials within the filter. This paper presents the experimental design to vary ${\bf E} \times {\bf B}$ drift speed of carbon-14 $β$-decay electrons using a custom electrode field cage situated between the pole faces of an electromagnet. Matching our results with high-fidelity simulation, we deduce a capacity to increase particle time of flight by a factor of 5 in the field cage's slow drift region. Limited only by the dimensions of our system, we assert drift speed can be arbitrarily slowed to meet the needs of PTOLEMY's future detector. △ Less

Submitted 28 March, 2025; v1 submitted 13 March, 2025; originally announced March 2025.

Comments: 26 pages, 32 figures

Implementation and Optimization of the PTOLEMY Transverse Drift Electromagnetic Filter

Authors: A. Apponi, M. G. Betti, M. Borghesi, A. Boscá, F. Calle, N. Canci, G. Cavoto, C. Chang, W. Chung, A. G. Cocco, A. P. Colijn, N. D'Ambrosio, N. de Groot, M. Faverzani, A. Ferella, E. Ferri, L. Ficcadenti, P. Garcia-Abia, G. Garcia Gomez-Tejedor, S. Gariazzo, F. Gatti, C. Gentile, A. Giachero, Y. Hochberg, Y. Kahn , et al. (31 additional authors not shown)

Abstract: The PTOLEMY transverse drift filter is a new concept to enable precision analysis of the energy spectrum of electrons near the tritium beta-decay endpoint. This paper details the implementation and optimization methods for successful operation of the filter. We present the first demonstrator that produces the required magnetic field properties with an iron return-flux magnet. Two methods for the s… ▽ More The PTOLEMY transverse drift filter is a new concept to enable precision analysis of the energy spectrum of electrons near the tritium beta-decay endpoint. This paper details the implementation and optimization methods for successful operation of the filter. We present the first demonstrator that produces the required magnetic field properties with an iron return-flux magnet. Two methods for the setting of filter electrode voltages are detailed. The challenges of low-energy electron transport in cases of low field are discussed, such as the growth of the cyclotron radius with decreasing magnetic field, which puts a ceiling on filter performance relative to fixed filter dimensions. Additionally, low pitch angle trajectories are dominated by motion parallel to the magnetic field lines and introduce non-adiabatic conditions and curvature drift. To minimize these effects and maximize electron acceptance into the filter, we present a three-potential-well design to simultaneously drain the parallel and transverse kinetic energies throughout the length of the filter. These optimizations are shown, in simulation, to achieve low-energy electron transport from a 1 T iron core (or 3 T superconducting) starting field with initial kinetic energy of 18.6 keV drained to <10 eV (<1 eV) in about 80 cm. This result for low field operation paves the way for the first demonstrator of the PTOLEMY spectrometer for measurement of electrons near the tritium endpoint to be constructed at the Gran Sasso National Laboratary (LNGS) in Italy. △ Less

Submitted 24 January, 2022; v1 submitted 23 August, 2021; originally announced August 2021.

Comments: 29 pages, 25 figures

Carbon nanotubes as anisotropic target for dark matter

Authors: G Cavoto, M G Betti, C Mariani, F Pandolfi, A D Polosa, I Rago, A Ruocco

Abstract: Directional detection of Dark Matter (DM) particles could be accomplished by studying either ion or electron recoils in large arrays of parallel carbon nanotubes. For instance, a MeV mass DM particle could scatter off a lattice electron, resulting in the transfer of sufficient energy to eject the electron from the nanotube surface. The electron can eventually be detected whenever an external elect… ▽ More Directional detection of Dark Matter (DM) particles could be accomplished by studying either ion or electron recoils in large arrays of parallel carbon nanotubes. For instance, a MeV mass DM particle could scatter off a lattice electron, resulting in the transfer of sufficient energy to eject the electron from the nanotube surface. The electron can eventually be detected whenever an external electric field is added to drive it from the open ends of the array. This detection scheme would offer an anisotropic response and could be used to select an orientation of the target with respect to the DM wind. A compact sensor, in which the cathode element is substituted with a dense array of parallel carbon nanotubes, could serve as the basic detection unit which - if adequately replicated - would allow to explore a significant region of light DM mass and cross-section. A similar detection scheme could be used to detect DM particles with mass in the GeV range scattering off the surface of a CNT and ejecting a carbon ion. We report about the Monte Carlo simulations of such a system and the R&D towards a detector prototype. △ Less

Submitted 4 November, 2019; originally announced November 2019.

Comments: 4 pages 5 figure oprepared for proceedings of TAUP 2019

Carbon nanotubes as target for directional detection of light WIMP

Authors: V. C. Antochi, E. Baracchini, G. Cavoto, E. Di Marco, G. Mazzitelli, D. Pinci, A. D. Polosa, F. Renga, C. Voena

Abstract: In this paper I will briefly introduce the idea of using Carbon Nanotubes (CNT) as target for the detection of low mass WIMPs with the additional information of directionality. I will also present the experimental efforts of developing a Time Projection Chamber with a CNT target inside and the results of a test beam at the Beam Test Facility of INFN-LNF. In this paper I will briefly introduce the idea of using Carbon Nanotubes (CNT) as target for the detection of low mass WIMPs with the additional information of directionality. I will also present the experimental efforts of developing a Time Projection Chamber with a CNT target inside and the results of a test beam at the Beam Test Facility of INFN-LNF. △ Less

Submitted 9 July, 2017; originally announced July 2017.

Comments: 3 figures, IFAE2017 poster session proceedings

Sub-GeV Dark Matter Detection with Electron Recoils in Carbon Nanotubes

Authors: G. Cavoto, F. Luchetta, A. D. Polosa

Abstract: Directional detection of Dark Matter particles (DM) in the MeV mass range could be accomplished by studying electron recoils in large arrays of parallel carbon nanotubes. In a scattering process with a lattice electron, a DM particle might transfer sufficient energy to eject it from the nanotube surface. An external electric field is added to drive the electron from the open ends of the array to t… ▽ More Directional detection of Dark Matter particles (DM) in the MeV mass range could be accomplished by studying electron recoils in large arrays of parallel carbon nanotubes. In a scattering process with a lattice electron, a DM particle might transfer sufficient energy to eject it from the nanotube surface. An external electric field is added to drive the electron from the open ends of the array to the detection region. The anisotropic response of this detection scheme, as a function of the orientation of the target with respect to the DM wind, is calculated, and it is concluded that no direct measurement of the electron ejection angle is needed to explore significant regions of the light DM exclusion plot. A compact sensor, in which the cathode element is substituted with a dense array of parallel carbon nanotubes, could serve as the basic detection unit. △ Less

Submitted 23 November, 2017; v1 submitted 8 June, 2017; originally announced June 2017.

Comments: 8 pages, 4 figures; updated and improved version to appear in Phys. Lett. B

WIMP detection and slow ion dynamics in carbon nanotube arrays

Authors: G. Cavoto, E. N. M. Cirillo, F. Cocina, J. Ferretti, A. D. Polosa

Abstract: Large arrays of aligned carbon nanotubes (CNTs), open at one end, could be used as target material for the directional detection of weakly interacting dark matter particles (WIMPs). As a result of a WIMP elastic scattering on a CNT, a carbon ion might be injected in the body of the array and propagate through multiple collisions within the lattice. The ion may eventually emerge from the surface wi… ▽ More Large arrays of aligned carbon nanotubes (CNTs), open at one end, could be used as target material for the directional detection of weakly interacting dark matter particles (WIMPs). As a result of a WIMP elastic scattering on a CNT, a carbon ion might be injected in the body of the array and propagate through multiple collisions within the lattice. The ion may eventually emerge from the surface with open end CNTs, provided that its longitudinal momentum is large enough to compensate energy losses and its transverse momentum approaches the channeling conditions in a single CNT. Therefore, the angle formed between the WIMP wind apparent orientation and the direction of parallel carbon nanotube axes must be properly chosen. We focus on very low ion recoil kinetic energies, related to low mass WIMPs (~ 10 GeV) where most of the existing experiments have low sensitivity. Relying on some exact results on two-dimensional lattices of circular obstacles, we study the low energy ion motion in the transverse plane with respect to CNT directions. New constraints are obtained on how to devise the CNT arrays to maximize the detection efficiency. △ Less

Submitted 10 June, 2016; v1 submitted 9 February, 2016; originally announced February 2016.

Comments: 10 pages, 12 figures, comments and clarifications added, to appear in EPJC

Directional Dark Matter Searches with Carbon Nanotubes

Authors: L. M. Capparelli, G. Cavoto, D. Mazzilli, A. D. Polosa

Abstract: A new solution to the problem of dark matter directional detection might come from the use of large arrays of aligned carbon nanotubes. We calculate the expected rate of carbon ions channeled in single-wall nanotubes once extracted by the scattering with a massive dark matter particle. Depending on its initial kinematic conditions, the ejected Carbon ion may be channeled in the nanotube array or s… ▽ More A new solution to the problem of dark matter directional detection might come from the use of large arrays of aligned carbon nanotubes. We calculate the expected rate of carbon ions channeled in single-wall nanotubes once extracted by the scattering with a massive dark matter particle. Depending on its initial kinematic conditions, the ejected Carbon ion may be channeled in the nanotube array or stop in the bulk. The orientation of the array with respect to the direction of motion of the Sun has an appreciable effect on the channeling probability. This provides the required anisotropic response for a directional detector. △ Less

Submitted 5 December, 2015; v1 submitted 28 December, 2014; originally announced December 2014.

Comments: Error corrected, four plots updated

Further investigations on the Neutron Flux Generation in a Plasma Discharge Electrolytic Cell

Authors: R. Faccini, A. Pilloni, A. D. Polosa, M. Angelone, E. Castagna, S. Lecci, S. Loreti, A. Pietropaolo, M. Pillon, M. Sansovini, F. Sarto, V. Violante, R. Bedogni, A. Esposito

Abstract: Our recent paper on the "Search for Neutron Flux Generation in a Plasma Discharge Electrolytic Cell" [1] has as main goal the validation of the experiment in Ref.[2]. As a follow-up, Ref.[3] moves a set of objections on our procedure and presents argumentations on why the experiments should not yield the same results. We collect here additional material and calculations that contribute to understa… ▽ More Our recent paper on the "Search for Neutron Flux Generation in a Plasma Discharge Electrolytic Cell" [1] has as main goal the validation of the experiment in Ref.[2]. As a follow-up, Ref.[3] moves a set of objections on our procedure and presents argumentations on why the experiments should not yield the same results. We collect here additional material and calculations that contribute to understanding the observed discrepancies. Furthermore we prove that the absence of signals from Indium activation detectors reported also for the experiment of Ref.[2] is a clear indication that neutron production does not occur. [1] R.Faccini et al arXiv:1310.4749 [2] D.Cirillo et al, Key Engineering Materials 495, 104 (2012). [3] A.Widom et al. arXiv:1311.2447 △ Less

Submitted 30 January, 2014; originally announced January 2014.

Comments: 5 pages, 3 figures

Search for Neutron Flux Generation in a Plasma Discharge Electrolytic Cell

Authors: R. Faccini, A. Pilloni, A. D. Polosa, M. Angelone, E. Castagna, S. Lecci, A. Pietropaolo, M. Pillon, M. Sansovini, F. Sarto, V. Violante, R. Bedogni, A. Esposito

Abstract: Following some recent unexpected hints of neutron production in setups like high-voltage atmospheric discharges and plasma discharges in electrolytic cells, we present a measurement of the neutron flux in a configuration similar to the latter. We use two different types of neutron detectors, poly-allyl-diglicol-carbonate (PADC, aka CR-39) tracers and Indium disks. At 95% C.L. we provide an upper l… ▽ More Following some recent unexpected hints of neutron production in setups like high-voltage atmospheric discharges and plasma discharges in electrolytic cells, we present a measurement of the neutron flux in a configuration similar to the latter. We use two different types of neutron detectors, poly-allyl-diglicol-carbonate (PADC, aka CR-39) tracers and Indium disks. At 95% C.L. we provide an upper limit of 1.5 neutrons cm^-2 s^-1 for the thermal neutron flux at ~5 cm from the center of the cell. Allowing for a higher energy neutron component the largest allowed flux is 64 neutrons cm^-2 s^-1. This upper limit is two orders of magnitude smaller than what previously claimed in an electrolytic cell plasma discharge experiment. Furthermore the behavior of the CR-39 is discussed to point our possible sources of spurious signals. △ Less

Submitted 17 October, 2013; originally announced October 2013.

Comments: 4 pages, 3 figures

IRIDE White Book, An Interdisciplinary Research Infrastructure based on Dual Electron linacs&lasers

Authors: D. Alesini, M. Alessandroni, M. P. Anania, S. Andreas, M. Angelone, A. Arcovito, F. Arnesano, M. Artioli, L. Avaldi, D. Babusci, A. Bacci, A. Balerna, S. Bartalucci, R. Bedogni, M. Bellaveglia, F. Bencivenga, M. Benfatto, S. Biedron, V. Bocci, M. Bolognesi, P. Bolognesi, R. Boni, R. Bonifacio, M. Boscolo, F. Boscherini , et al. (189 additional authors not shown)

Abstract: This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high ener… ▽ More This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high energy lasers. Conceived to provide unique research possibilities for particle physics, for condensed matter physics, chemistry and material science, for structural biology and industrial applications, IRIDE will open completely new research possibilities and advance our knowledge in many branches of science and technology. IRIDE will contribute to open new avenues of discoveries and to address most important riddles: What does matter consist of? What is the structure of proteins that have a fundamental role in life processes? What can we learn from protein structure to improve the treatment of diseases and to design more efficient drugs? But also how does an electronic chip behave under the effect of radiations? How can the heat flow in a large heat exchanger be optimized? The scientific potential of IRIDE is far reaching and justifies the construction of such a large facility in Italy in synergy with the national research institutes and companies and in the framework of the European and international research. It will impact also on R&D work for ILC, FEL, and will be complementarity to other large scale accelerator projects. IRIDE is also intended to be realized in subsequent stages of development depending on the assigned priorities. △ Less

Submitted 30 July, 2013; originally announced July 2013.

Comments: 270 pages

Wavelet Analysis of Blood Pressure Waves in Vasovagal Syncope

Authors: A. Marrone, A. D. Polosa, G. Scioscia, S. Stramaglia, A. Zenzola

Abstract: We describe the multiresolution wavelet analysis of blood pressure waves in vasovagal syncope affected patients compared with healthy people. We argue that there exist discriminating criteria which allow us to isolate particular features, common to the syncope-affected patients sample, indicating an alternative diagnosis methodology for this syndrome. We perform a throughout analysis both in the… ▽ More We describe the multiresolution wavelet analysis of blood pressure waves in vasovagal syncope affected patients compared with healthy people. We argue that there exist discriminating criteria which allow us to isolate particular features, common to the syncope-affected patients sample, indicating an alternative diagnosis methodology for this syndrome. We perform a throughout analysis both in the Haar basis and in a Gaussian one, with an attempt to grasp the underlying dynamics. △ Less

Submitted 13 October, 1998; v1 submitted 22 June, 1998; originally announced June 1998.

Comments: 13 pages, LaTeX, with 6 figures, changed content

Report number: Bari-Th/305-98

Journal ref: Physica A271, 458 (1999)