-
Modeling Magnetic Fields with Helical Solutions to Laplace's Equation
Authors:
Brian Pollack,
Ryan Pellico,
Cole Kampa,
Henry Glass,
Michael Schmitt
Abstract:
The series solution to Laplace's equation in a helical coordinate system is derived and refined using symmetry and chirality arguments. These functions and their more commonplace counterparts are used to model solenoidal magnetic fields via linear, multidimensional curve-fitting. A judicious choice of functional forms, a small number of free parameters and sparse input data can lead to highly accu…
▽ More
The series solution to Laplace's equation in a helical coordinate system is derived and refined using symmetry and chirality arguments. These functions and their more commonplace counterparts are used to model solenoidal magnetic fields via linear, multidimensional curve-fitting. A judicious choice of functional forms, a small number of free parameters and sparse input data can lead to highly accurate, fine-grained modeling of solenoidal magnetic fields, including helical features arising from the winding of the solenoid, with overall field accuracy at better than one part per million.
△ Less
Submitted 6 July, 2020; v1 submitted 8 January, 2019;
originally announced January 2019.
-
Expression of Interest for Evolution of the Mu2e Experiment
Authors:
F. Abusalma,
D. Ambrose,
A. Artikov,
R. Bernstein,
G. C. Blazey,
C. Bloise,
S. Boi,
T. Bolton,
J. Bono,
R. Bonventre,
D. Bowring,
D. Brown,
D. Brown,
K. Byrum,
M. Campbell,
J. -F. Caron,
F. Cervelli,
D. Chokheli,
K. Ciampa,
R. Ciolini,
R. Coleman,
D. Cronin-Hennessy,
R. Culbertson,
M. A. Cummings,
A. Daniel
, et al. (103 additional authors not shown)
Abstract:
We propose an evolution of the Mu2e experiment, called Mu2e-II, that would leverage advances in detector technology and utilize the increased proton intensity provided by the Fermilab PIP-II upgrade to improve the sensitivity for neutrinoless muon-to-electron conversion by one order of magnitude beyond the Mu2e experiment, providing the deepest probe of charged lepton flavor violation in the fores…
▽ More
We propose an evolution of the Mu2e experiment, called Mu2e-II, that would leverage advances in detector technology and utilize the increased proton intensity provided by the Fermilab PIP-II upgrade to improve the sensitivity for neutrinoless muon-to-electron conversion by one order of magnitude beyond the Mu2e experiment, providing the deepest probe of charged lepton flavor violation in the foreseeable future. Mu2e-II will use as much of the Mu2e infrastructure as possible, providing, where required, improvements to the Mu2e apparatus to accommodate the increased beam intensity and cope with the accompanying increase in backgrounds.
△ Less
Submitted 7 February, 2018;
originally announced February 2018.
-
Bayesian Block Histogramming for High Energy Physics
Authors:
Brian Pollack,
Saptaparna Bhattacharya,
Michael Schmitt
Abstract:
The Bayesian Block algorithm, originally developed for applications in astronomy, can be used to improve the binning of histograms in high energy physics. The visual improvement can be dramatic, as shown here with two simple examples. More importantly, this algorithm and the histogram is produces is a non-parametric density estimate, providing a description of background distributions that does no…
▽ More
The Bayesian Block algorithm, originally developed for applications in astronomy, can be used to improve the binning of histograms in high energy physics. The visual improvement can be dramatic, as shown here with two simple examples. More importantly, this algorithm and the histogram is produces is a non-parametric density estimate, providing a description of background distributions that does not suffer from the arbitrariness of ad hoc analytical functions. The statistical power of an hypothesis test based on Bayesian Blocks is nearly as good as that obtained by fitting analytical functions. Two examples are provided: a narrow peak on a smoothly-falling background, and an excess in the tail of a background that falls rapidly over several orders of magnitude. These examples show the usefulness of the binning provided by the Bayesian Blocks algorithm both for presentation of data and when searching for new physics.
△ Less
Submitted 13 June, 2019; v1 submitted 2 August, 2017;
originally announced August 2017.
-
Design, Construction and Testing of the Digital Hadron Calorimeter (DHCAL) Electronics
Authors:
C. Adams,
A. Bambaugh,
B. Bilki,
J. Butler,
F. Corriveau,
T. Cundiff,
G. Drake,
K. Francis,
V. Guarino,
B. Haberichter,
E. Hazen,
J. Hoff,
S. Holm,
A. Kreps,
P. DeLurgio,
L. Dal Monte,
N. Mucia,
E. Norbeck,
D. Northacker,
Y. Onel,
B. Pollack,
J. Repond,
J. Schlereth,
J. R. Smith,
D. Trojand
, et al. (8 additional authors not shown)
Abstract:
A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first ord…
▽ More
A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first order the energy of incident particles in this calorimeter is reconstructed as being proportional to the number of pads with a signal over a given threshold. A large-scale prototype calorimeter with approximately 500,000 readout channels has been built and underwent extensive testing in the Fermilab and CERN test beams. This paper reports on the design, construction, and commissioning of the electronic readout system of this prototype calorimeter. The system is based on the DCAL front-end chip and a VME-based back-end.
△ Less
Submitted 4 March, 2016;
originally announced March 2016.
-
Design, Construction and Commissioning of the Digital Hadron Calorimeter - DHCAL
Authors:
C. Adams,
A. Bambaugh,
B. Bilki,
J. Butler,
F. Corriveau,
T. Cundiff,
G. Drake,
K. Francis,
B. Furst,
V. Guarino,
B. Haberichter,
E. Hazen,
J. Hoff,
S. Holm,
A. Kreps,
P. DeLurgio,
Z. Matijas,
L. Dal Monte,
N. Mucia,
E. Norbeck,
D. Northacker,
Y. Onel,
B. Pollack,
J. Repond,
J. Schlereth
, et al. (11 additional authors not shown)
Abstract:
A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first ord…
▽ More
A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first order the energy of incident particles in this calorimeter is reconstructed as being proportional to the number of pads with a signal over a given threshold. A large-scale prototype calorimeter with approximately 500,000 readout channels has been built and underwent extensive testing in the Fermilab and CERN test beams. This paper reports on the design, construction, and commissioning of this prototype calorimeter.
△ Less
Submitted 4 March, 2016;
originally announced March 2016.
-
Fast Beam Condition Monitor for CMS: performance and upgrade
Authors:
Jessica L. Leonard,
Alan Bell,
Piotr Burtowy,
Anne Dabrowski,
Maria Hempel,
Hans Henschel,
Wolfgang Lange,
Wolfgang Lohmann,
Nathaniel Odell,
Marek Penno,
Brian Pollack,
Dominik Przyborowski,
Vladimir Ryjov,
David Stickland,
Roberval Walsh,
Weronika Warzycha,
Agnieszka Zagozdzinska
Abstract:
The CMS beam and radiation monitoring subsystem BCM1F (Fast Beam Condition Monitor) consists of 8 individual diamond sensors situated around the beam pipe within the pixel detector volume, for the purpose of fast bunch-by-bunch monitoring of beam background and collision products. In addition, effort is ongoing to use BCM1F as an online luminosity monitor. BCM1F will be running whenever there is b…
▽ More
The CMS beam and radiation monitoring subsystem BCM1F (Fast Beam Condition Monitor) consists of 8 individual diamond sensors situated around the beam pipe within the pixel detector volume, for the purpose of fast bunch-by-bunch monitoring of beam background and collision products. In addition, effort is ongoing to use BCM1F as an online luminosity monitor. BCM1F will be running whenever there is beam in LHC, and its data acquisition is independent from the data acquisition of the CMS detector, hence it delivers luminosity even when CMS is not taking data. A report is given on the performance of BCM1F during LHC run I, including results of the van der Meer scan and on-line luminosity monitoring done in 2012. In order to match the requirements due to higher luminosity and 25 ns bunch spacing, several changes to the system must be implemented during the upcoming shutdown, including upgraded electronics and precise gain monitoring. First results from Run II preparation are shown.
△ Less
Submitted 8 May, 2014;
originally announced May 2014.
