-
Doped and structured silica optical fibres for fibre laser sources
Authors:
I. Kasik,
I. Barton,
M. Kamradek,
O. Podrazky,
J. Aubrecht,
P. Varak,
P. Peterka,
P. Honzatko,
D. Pysz,
M. Franczyk,
R. Buczynski
Abstract:
Specialty optical fibres, usually the silica-based ones doped with rare-earth ions, have been heart of fibre amplifiers and lasers spread thanks to work of team of Sir David N. Payne started in 1980-ies of 20th century. Wavelength of their emission depends on used rare earth, on glass matrix in which the rare earths are incorporated, on fibre structure in macro, micro and nano scale, and fibre las…
▽ More
Specialty optical fibres, usually the silica-based ones doped with rare-earth ions, have been heart of fibre amplifiers and lasers spread thanks to work of team of Sir David N. Payne started in 1980-ies of 20th century. Wavelength of their emission depends on used rare earth, on glass matrix in which the rare earths are incorporated, on fibre structure in macro, micro and nano scale, and fibre laser architecture. Usually, fibre lasers are operated at single wavelength. A typical example is an erbium fibre laser (erbium ions in modified silica glass) operating around 1550 nm or ytterbium fibre laser (ytterbium ions in modified silica glass) operating around 1060 nm. When erbium and ytterbium ions together are randomly distributed in a silica glass matrix and pumped at absorption band of ytterbium, laser emission is typically obtained only at 1550 nm (emission of erbium) thanks to energy transfer from ytterbium to erbium ions, supported by modification of silica glass matrix with phosphorous pentoxide. However, when erbium and ytterbium ions are specifically structured in micro or nano scale in the fibre core it is possible to obtain dual-wavelength laser operation with controlled output parameters. Such dual-wavelength operation with controlled output at 1042 nm and simultaneously at 1550 nm was demonstrated with structured core Er3+ and Yb3+-doped fibre. The proposed approach makes fabrication of active fibres emitting with controlled characteristics at more wavelengths possible.
△ Less
Submitted 3 January, 2025; v1 submitted 31 December, 2024;
originally announced January 2025.
-
Nanoparticle doping as a way to enhance holmium fiber lasers efficiency
Authors:
M. Kamradek,
I. Kasik,
J. Aubrecht,
P. Varak,
O. Podrazky,
I. Barton,
J. Pokorny,
P. Peterka,
P. Honzatko
Abstract:
Highly-doped holmium fibers have been prepared using modified chemical vapor deposition in combination with nanoparticle-doping method. Within a series of various Al2O3 and Ho3+ concentrations, relations between fibers composition and their fluorescence and laser parameters have been studied. Al/Ho molar ratio equal to at least 50 was found to be the key factor for fibers with outstanding paramete…
▽ More
Highly-doped holmium fibers have been prepared using modified chemical vapor deposition in combination with nanoparticle-doping method. Within a series of various Al2O3 and Ho3+ concentrations, relations between fibers composition and their fluorescence and laser parameters have been studied. Al/Ho molar ratio equal to at least 50 was found to be the key factor for fibers with outstanding parameters. Fibers with slope efficiency above 80%, laser threshold below 100 mW and fluorescence lifetime up to 1.6 ms have been prepared. Thanks to high Al2O3 concentrations, obtained through nanoparticle doping, we were able to achieve high-performance fibers in a wide range of Ho3+ concentrations. An output power of 19 W with 81% slope efficiency was reached using fiber with almost 4000 ppm of Ho3+ and 10 mol.% of Al2O3. This result is encouraging for highly efficient high-power cladding-pumped holmium fiber lasers, and studied relations between fibers composition and their laser parameters will be used in the designing of such laser sources.
△ Less
Submitted 17 December, 2024; v1 submitted 13 December, 2024;
originally announced December 2024.
-
Preparation and characterization of highly thulium- and alumina-doped optical fibers for single-frequency fiber lasers
Authors:
Pavel Honzatko,
Anirban Dhar,
Ivan Kasik,
Ondrej Podrazky,
Vlastimil Matejec,
Pavel Peterka,
Wilfried Blanc,
Bernard Dussardier
Abstract:
Thulium-doped fibers suitable for core-pumped single-frequency lasers were fabricated by the modified chemical vapor deposition (MCVD) method. Refractive index profile, doping profile and spectral absorption was measured. High doping concentration of thulium ions should be achieved to allow for high absorption of light at a pump wavelength while the thulium ions clustering should be avoided to pre…
▽ More
Thulium-doped fibers suitable for core-pumped single-frequency lasers were fabricated by the modified chemical vapor deposition (MCVD) method. Refractive index profile, doping profile and spectral absorption was measured. High doping concentration of thulium ions should be achieved to allow for high absorption of light at a pump wavelength while the thulium ions clustering should be avoided to prevent the cooperative upconversion and quenching processes. The fabricated fibers featured pump absorption up to 70dB/m at a pump wavelength of 1611nm. The single-frequency master oscillator with a resonator composed of a pair of fiber Bragg gratings and a thulium-doped fiber was demonstrated with predominantly single ended operation. We achieved a slope efficiency of 22% and a threshold of 22mW at a lasing wavelength of 1944nm.
△ Less
Submitted 14 September, 2012;
originally announced September 2012.
-
Preparation and Properties of Er-Doped ZrO2 Nanocrystalline Phase-Separated Preforms of Optical Fibers by MCVD Process
Authors:
Anirban Dhar,
Ivan Kasik,
Ondrej Podrazky,
Vlastimil Matejec,
Bernard Dussardier
Abstract:
The fabrication of Er-doped ZrO2-based nanocrystalline phase-separated silica optical preforms by the MCVD and solution doping techniques is presented. Fabricated preform cores are nearly transparent and contain phase-separated rare-earth doped nanocrystalline particles with diameters mainly in a range from 20 to 80 nm. High concentrations of erbium and aluminium in preform cores of about 0.3 and…
▽ More
The fabrication of Er-doped ZrO2-based nanocrystalline phase-separated silica optical preforms by the MCVD and solution doping techniques is presented. Fabricated preform cores are nearly transparent and contain phase-separated rare-earth doped nanocrystalline particles with diameters mainly in a range from 20 to 80 nm. High concentrations of erbium and aluminium in preform cores of about 0.3 and 14 mol%, respectively have been achieved without defects on the core-cladding interface. Spectral losses in a range 800-1600 nm and fluorescence spectra of erbium ions around 1550 nm measured on a fibre drawn from the preform are reported.
△ Less
Submitted 30 November, 2011;
originally announced November 2011.
