-
Full-waveform earthquake source inversion using simulation-based inference
Authors:
A. A. Saoulis,
D. Piras,
A. Spurio Mancini,
B. Joachimi,
A. M. G. Ferreira
Abstract:
This paper presents a novel framework for full-waveform seismic source inversion using simulation-based inference (SBI). Traditional probabilistic approaches often rely on simplifying assumptions about data errors, which we show can lead to inaccurate uncertainty quantification. SBI addresses this limitation by building an empirical probabilistic model of the data errors using machine learning mod…
▽ More
This paper presents a novel framework for full-waveform seismic source inversion using simulation-based inference (SBI). Traditional probabilistic approaches often rely on simplifying assumptions about data errors, which we show can lead to inaccurate uncertainty quantification. SBI addresses this limitation by building an empirical probabilistic model of the data errors using machine learning models, known as neural density estimators, which can then be integrated into the Bayesian inference framework. We apply the SBI framework to point-source moment tensor inversions as well as joint moment tensor and time-location inversions. We construct a range of synthetic examples to explore the quality of the SBI solutions, as well as to compare the SBI results with standard Gaussian likelihood-based Bayesian inversions. We then demonstrate that under real seismic noise, common Gaussian likelihood assumptions for treating full-waveform data yield overconfident posterior distributions that underestimate the moment tensor component uncertainties by up to a factor of 3. We contrast this with SBI, which produces well-calibrated posteriors that generally agree with the true seismic source parameters, and offers an order-of-magnitude reduction in the number of simulations required to perform inference compared to standard Monte Carlo techniques. Finally, we apply our methodology to a pair of moderate magnitude earthquakes in the North Atlantic. We utilise seismic waveforms recorded by the recent UPFLOW ocean bottom seismometer array as well as by regional land stations in the Azores, comparing full moment tensor and source-time location posteriors between SBI and a Gaussian likelihood approach. We find that our adaptation of SBI can be directly applied to real earthquake sources to efficiently produce high quality posterior distributions that significantly improve upon Gaussian likelihood approaches.
△ Less
Submitted 14 May, 2025; v1 submitted 30 October, 2024;
originally announced October 2024.
-
A robust estimator of mutual information for deep learning interpretability
Authors:
Davide Piras,
Hiranya V. Peiris,
Andrew Pontzen,
Luisa Lucie-Smith,
Ningyuan Guo,
Brian Nord
Abstract:
We develop the use of mutual information (MI), a well-established metric in information theory, to interpret the inner workings of deep learning models. To accurately estimate MI from a finite number of samples, we present GMM-MI (pronounced $``$Jimmie$"$), an algorithm based on Gaussian mixture models that can be applied to both discrete and continuous settings. GMM-MI is computationally efficien…
▽ More
We develop the use of mutual information (MI), a well-established metric in information theory, to interpret the inner workings of deep learning models. To accurately estimate MI from a finite number of samples, we present GMM-MI (pronounced $``$Jimmie$"$), an algorithm based on Gaussian mixture models that can be applied to both discrete and continuous settings. GMM-MI is computationally efficient, robust to the choice of hyperparameters and provides the uncertainty on the MI estimate due to the finite sample size. We extensively validate GMM-MI on toy data for which the ground truth MI is known, comparing its performance against established mutual information estimators. We then demonstrate the use of our MI estimator in the context of representation learning, working with synthetic data and physical datasets describing highly non-linear processes. We train deep learning models to encode high-dimensional data within a meaningful compressed (latent) representation, and use GMM-MI to quantify both the level of disentanglement between the latent variables, and their association with relevant physical quantities, thus unlocking the interpretability of the latent representation. We make GMM-MI publicly available.
△ Less
Submitted 23 March, 2023; v1 submitted 31 October, 2022;
originally announced November 2022.
-
Towards fast machine-learning-assisted Bayesian posterior inference of microseismic event location and source mechanism
Authors:
Davide Piras,
Alessio Spurio Mancini,
Ana M. G. Ferreira,
Benjamin Joachimi,
Michael P. Hobson
Abstract:
Bayesian inference applied to microseismic activity monitoring allows the accurate location of microseismic events from recorded seismograms and the estimation of the associated uncertainties. However, the forward modelling of these microseismic events, which is necessary to perform Bayesian source inversion, can be prohibitively expensive in terms of computational resources. A viable solution is…
▽ More
Bayesian inference applied to microseismic activity monitoring allows the accurate location of microseismic events from recorded seismograms and the estimation of the associated uncertainties. However, the forward modelling of these microseismic events, which is necessary to perform Bayesian source inversion, can be prohibitively expensive in terms of computational resources. A viable solution is to train a surrogate model based on machine learning techniques, to emulate the forward model and thus accelerate Bayesian inference. In this paper, we substantially enhance previous work, which considered only sources with isotropic moment tensors. We train a machine learning algorithm on the power spectrum of the recorded pressure wave and show that the trained emulator allows complete and fast event locations for $\textit{any}$ source mechanism. Moreover, we show that our approach is computationally inexpensive, as it can be run in less than 1 hour on a commercial laptop, while yielding accurate results using less than $10^4$ training seismograms. We additionally demonstrate how the trained emulators can be used to identify the source mechanism through the estimation of the Bayesian evidence. Finally, we demonstrate that our approach is robust to real noise as measured in field data. This work lays the foundations for efficient, accurate future joint determinations of event location and moment tensor, and associated uncertainties, which are ultimately key for accurately characterising human-induced and natural earthquakes, and for enhanced quantitative seismic hazard assessments.
△ Less
Submitted 28 October, 2022; v1 submitted 12 January, 2021;
originally announced January 2021.
-
Accelerating Bayesian microseismic event location with deep learning
Authors:
A. Spurio Mancini,
D. Piras,
A. M. G. Ferreira,
M. P. Hobson,
B. Joachimi
Abstract:
We present a series of new open source deep learning algorithms to accelerate Bayesian full waveform point source inversion of microseismic events. Inferring the joint posterior probability distribution of moment tensor components and source location is key for rigorous uncertainty quantification. However, the inference process requires forward modelling of microseismic traces for each set of para…
▽ More
We present a series of new open source deep learning algorithms to accelerate Bayesian full waveform point source inversion of microseismic events. Inferring the joint posterior probability distribution of moment tensor components and source location is key for rigorous uncertainty quantification. However, the inference process requires forward modelling of microseismic traces for each set of parameters explored by the sampling algorithm, which makes the inference very computationally intensive. In this paper we focus on accelerating this process by training deep learning models to learn the mapping between source location and seismic traces, for a given 3D heterogeneous velocity model, and a fixed isotropic moment tensor for the sources. These trained emulators replace the expensive solution of the elastic wave equation in the inference process. We compare our results with a previous study that used emulators based on Gaussian Processes to invert microseismic events. We show that all of our models provide more accurate predictions and $\sim 100$ times faster predictions than the method based on Gaussian Processes, and a $\mathcal{O}(10^5)$ speed-up factor over a pseudo-spectral method for waveform generation. For example, a 2-s long synthetic trace can be generated in $\sim 10$ ms on a common laptop processor, instead of $\sim$ 1 hr using a pseudo-spectral method on a high-profile Graphics Processing Units card. We also show that our inference results are in excellent agreement with those obtained from traditional location methods based on travel time estimates. The speed, accuracy and scalability of our open source deep learning models pave the way for extensions of these emulators to generic source mechanisms and application to joint Bayesian inversion of moment tensor components and source location using full waveforms.
△ Less
Submitted 2 August, 2021; v1 submitted 14 September, 2020;
originally announced September 2020.
-
Scattering contrast in GHz frequency ultrasound subsurface atomic force microscopy for detection of deeply buried features
Authors:
Maarten H. van Es,
Benoit A. J. Quesson,
Abbas Mohtashami,
Daniele Piras,
Kodai Hatakeyama,
Laurent Fillinger,
Paul L. M. J. van Neer
Abstract:
While Atomic Force Microscopy is mostly used to investigate surface properties, people have almost since its invention sought to apply its high resolution capability to image also structures buried within samples. One of the earliest techniques for this was based on using ultrasound excitations to visualize local differences in effective tip-sample stiffness caused by the presence of buried struct…
▽ More
While Atomic Force Microscopy is mostly used to investigate surface properties, people have almost since its invention sought to apply its high resolution capability to image also structures buried within samples. One of the earliest techniques for this was based on using ultrasound excitations to visualize local differences in effective tip-sample stiffness caused by the presence of buried structures with different visco-elasticity from their surroundings. While the use of ultrasound has often triggered discussions on the contribution of diffraction or scattering of acoustic waves in visualizing buried structures, no conclusive papers on this topic have been published. Here we demonstrate and discuss how such acoustical effects can be unambiguously recognized and can be used with Atomic Force Microscopy to visualize deeply buried structures.
△ Less
Submitted 3 July, 2020;
originally announced July 2020.
-
A new acoustic lens material for large area detectors in photoacoustic breast tomography
Authors:
Wenfeng Xia,
Daniele Piras,
Johan C. G. van Hespen,
Wiendelt Steenbergen,
Srirang Manohar
Abstract:
Acoustic lenses made of acrylic plastic (PMMA) have been used to enlarge the acceptance angle of sensitive large surface area detectors and improve lateral resolution. However, PMMA lenses introduce image artifacts due to ultrasound internal reflections within the lenses. In this work we investigated this issue proposing a new lens material Stycast 1090SI. We characterized the acoustic properties…
▽ More
Acoustic lenses made of acrylic plastic (PMMA) have been used to enlarge the acceptance angle of sensitive large surface area detectors and improve lateral resolution. However, PMMA lenses introduce image artifacts due to ultrasound internal reflections within the lenses. In this work we investigated this issue proposing a new lens material Stycast 1090SI. We characterized the acoustic properties of the proposed material in comparison with PMMA. Detector performance using negative lenses with the two materials, was tested using finite element simulation and experiment. Further the image quality of a photoacoustic tomography system was studied using k-Wave simulation and experiment. Our acoustic characterization showed that Stycast 1090SI has tissue-like acoustic impedance, high speed of sound and low acoustic attenuation. Both acoustic lenses show significant enlargement of detector acceptance angle and lateral resolution improvement. However, image artifacts induced by acoustic lenses are reduced using the proposed lens compared to PMMA lens.
△ Less
Submitted 17 May, 2013;
originally announced May 2013.
-
An optimized ultrasound detector for photoacoustic breast tomography
Authors:
Wenfeng Xia,
Daniele Piras,
Johan Van Hespen,
Spiridon Van Veldhoven,
Christian Prins,
Ton Van Leeuwen,
Wiendelt Steenbergen,
Srirang Manohar
Abstract:
Photoacoustic imaging has proven to be able to detect vascularization-driven optical absorption contrast associated with tumors. In order to detect breast tumors located a few centimeter deep in tissue, a sensitive ultrasound detector is of crucial importance for photoacoustic mammography. Further, because the expected photoacoustic frequency bandwidth (a few MHz to tens of kHz) is inversely propo…
▽ More
Photoacoustic imaging has proven to be able to detect vascularization-driven optical absorption contrast associated with tumors. In order to detect breast tumors located a few centimeter deep in tissue, a sensitive ultrasound detector is of crucial importance for photoacoustic mammography. Further, because the expected photoacoustic frequency bandwidth (a few MHz to tens of kHz) is inversely proportional to the dimensions of light absorbing structures (0.5 to 10+ mm), proper choices of materials and their geometries, and proper considerations in design have to be made for optimal photoacoustic detectors. In this study, we design and evaluate a specialized ultrasound detector for photoacoustic mammography. Based on the required detector sensitivity and its frequency response, a selection of active material and matching layers and their geometries is made leading to a functional detector models. By iteration between simulation of detector performances, fabrication and experimental characterization of functional models an optimized implementation is made and evaluated. The experimental results of the designed first and second functional detectors matched with the simulations. In subsequent bare piezoelectric samples the effect of lateral resonances was addressed and their influence minimized by sub-dicing the samples. Consequently, using simulations, the final optimized detector could be designed, with a center frequency of 1 MHz and a -6 dB bandwidth of ~80%. The minimum detectable pressure was measured to be 0.5 Pa, which will facilitate deeper imaging compared to the currrent systems. The detector should be capable of detecting vascularized tumors with resolution of 1-2 mm. Further improvements by proper electrical grounding and shielding and implementation of this design into an arrayed detector will pave the way for clinical applications of photoacoustic mammography.
△ Less
Submitted 13 February, 2013; v1 submitted 11 December, 2012;
originally announced December 2012.
