-
Increasing the rate capability for the cryogenic stopping cell of the FRS Ion Catcher
Authors:
J. W. Zhao,
D. Amanbayev,
T. Dickel,
I. Miskun,
W. R. Plass,
N. Tortorelli,
S. Ayet San Andres,
Soenke Beck,
J. Bergmann,
Z. Brencic,
P. Constantin,
H. Geissel,
F. Greiner,
L. Groef,
C. Hornung,
N. Kuzminzuk,
G. Kripko-Koncz,
I. Mardor,
I. Pohjalainen,
C. Scheidenberger,
P. G. Thirolf,
S. Bagchi,
E. Haettner,
E. Kazantseva,
D. Kostyleva
, et al. (23 additional authors not shown)
Abstract:
At the FRS Ion Catcher (FRS-IC), projectile and fission fragments are produced at relativistic energies, separated in-flight, energy-bunched, slowed down, and thermalized in the ultra-pure helium gas-filled cryogenic stopping cell (CSC). Thermalized nuclei are extracted from the CSC using a combination of DC and RF electric fields and gas flow. This CSC also serves as the prototype CSC for the Sup…
▽ More
At the FRS Ion Catcher (FRS-IC), projectile and fission fragments are produced at relativistic energies, separated in-flight, energy-bunched, slowed down, and thermalized in the ultra-pure helium gas-filled cryogenic stopping cell (CSC). Thermalized nuclei are extracted from the CSC using a combination of DC and RF electric fields and gas flow. This CSC also serves as the prototype CSC for the Super-FRS, where exotic nuclei will be produced at unprecedented rates making it possible to go towards the extremes of the nuclear chart. Therefore, it is essential to efficiently extract thermalized exotic nuclei from the CSC under high beam rate conditions, in order to use the rare exotic nuclei which come as cocktail beams. The extraction efficiency dependence on the intensity of the impinging beam into the CSC was studied with a primary beam of 238U and its fragments. Tests were done with two different versions of the DC electrode structure inside the cryogenic chamber, the standard 1 m long and a short 0.5 m long DC electrode. In contrast to the rate capability of 10^4 ions/s with the long DC electrode, results show no extraction efficiency loss up to the rate of 2x10^5 ions/s with the new short DC electrode. This order of magnitude increase of the rate capability paves the way for new experiments at the FRS-IC, including exotic nuclei studies with in-cell multi-nucleon transfer reactions. The results further validate the design concept of the CSC for the Super-FRS, which was developed to effectively manage beams of even higher intensities.
△ Less
Submitted 4 August, 2023;
originally announced August 2023.
-
Mean range bunching of exotic nuclei produced by in-flight fragmentation and fission -- Stopped-beam experiments with increased efficiency
Authors:
Timo Dickel,
Christine Hornung,
Daler Amanbayev,
Samuel Ayet San Andres,
Soenke Beck,
Julian Bergmann,
Hans Geissel,
Juergen Gerl,
Magdalena Gorska,
Lizzy Groef,
Emma Haettner,
Jan-Paul Hucka,
Daria A. Kostyleva,
Gabriella Kripko-Koncz,
Ali Mollaebrahimi,
Ivan Mukha,
Stephane Pietri,
Wolfgang R. Plaß,
Zsolt Podolyak,
Sivaji Purushothaman,
Moritz Pascal Reiter,
Heidi Roesch,
Christoph Scheidenberger,
Yoshiki K. Tanaka,
Helmut Weick
, et al. (2 additional authors not shown)
Abstract:
The novel technique of mean range bunching has been developed and applied at the projectile fragment separator FRS at GSI in four experiments of the FAIR phase-0 experimental program. Using a variable degrader system at the final focal plane of the FRS, the ranges of the different nuclides can be aligned, allowing to efficiently implant a large number of different nuclides simultaneously in a gas-…
▽ More
The novel technique of mean range bunching has been developed and applied at the projectile fragment separator FRS at GSI in four experiments of the FAIR phase-0 experimental program. Using a variable degrader system at the final focal plane of the FRS, the ranges of the different nuclides can be aligned, allowing to efficiently implant a large number of different nuclides simultaneously in a gas-filled stopping cell or an implantation detector. Stopping and studying a cocktail beam overcomes the present limitations of stopped-beam experiments. The conceptual idea of mean range bunching is described and illustrated using simulations. In a single setting of the FRS, 37 different nuclides were stopped in the cryogenic stopping cell and were measured in a single setting broadband mass measurement with the multiple-reflection time-of-flight mass spectrometer of the FRS Ion Catcher.
△ Less
Submitted 30 May, 2023;
originally announced June 2023.
-
AGATA DAQ-box: a unified data acquisition system for different experimental conditions
Authors:
Amel Korichi,
Emmanuel Clément,
Nicolas Dosme,
Eric Legay,
Olivier Stézowski,
Alain Goasduff,
Yann Aubert,
Jéremie Dudouet,
Souhir Elloumi,
Phillipe Gauron,
Xavier Grave,
Michele Gulmini,
Jéremie Jacob,
Vincent Lafage,
Patrick Le Jeannic,
Guillaume Lalaire,
Joa Ljungvall,
Clothilde Maugeais,
Caterina Michelagnoli,
Roméo Molini,
Guillaume Philippon,
Stephane Pietri,
Damian Ralet,
Marco Roetta,
Frederic Saillant
, et al. (2 additional authors not shown)
Abstract:
The AGATA tracking detector array represents a significant improvement over previous Compton suppressed arrays. The construction of AGATA led to numerous technological breakthroughs in order to meet the requirements and the challenges of building a mobile detector across Europe. This paper focuses on the design and implementation of the data acquisition system responsible of the readout and contro…
▽ More
The AGATA tracking detector array represents a significant improvement over previous Compton suppressed arrays. The construction of AGATA led to numerous technological breakthroughs in order to meet the requirements and the challenges of building a mobile detector across Europe. This paper focuses on the design and implementation of the data acquisition system responsible of the readout and control of the germanium detectors of AGATA. Our system is highly versatile, capable of instrumenting AGATA and seamlessly adapting it to various configurations with a wide range of ancillary detectors and/or spectrometers. It consists of three main components: an autonomous and independent infrastructure, a dedicated application core ensuring overall consistency, and a high--performance software package providing a fully integrated data flow management including the setting-up, the supervision and the slow control of the instrument. In this paper, we present a comprehensive analysis of the system's design and performance, particularly under high-counting rate conditions.
△ Less
Submitted 21 July, 2023; v1 submitted 29 May, 2023;
originally announced May 2023.
-
High-resolution, accurate MR-TOF-MS for short-lived, exotic nuclei of few events in their ground and low-lying isomeric states
Authors:
S. Ayet,
C. Hornung,
J. Ebert,
W. R. Plaß,
T. Dickel,
H. Geissel,
C. Scheidenberger,
J. Bergmann,
F. Greiner,
E. Haettner,
C. Jesch,
W. Lippert,
I. Mardor,
I. Miskun,
Z. Patyk,
S. Pietri,
A. Pihktelev,
S. Purushothaman,
M. P. Reiter,
A. -K. Rink,
H. Weick,
M. I. Yavor,
S. Bagchi,
V. Charviakova,
P. Constantin
, et al. (15 additional authors not shown)
Abstract:
Mass measurements of fission and projectile fragments, produced via $^{238}$U and $^{124}$Xe primary beams, have been performed with the multiple-reflection time-of-flight mass spectrometer (MR-TOF-MS) of the FRS Ion Catcher with a mass resolving powers (FWHM) up to 410,000 and an uncertainty of $6\cdot 10^{-8}$. The nuclides were produced and separated in-flight with the fragment separator FRS at…
▽ More
Mass measurements of fission and projectile fragments, produced via $^{238}$U and $^{124}$Xe primary beams, have been performed with the multiple-reflection time-of-flight mass spectrometer (MR-TOF-MS) of the FRS Ion Catcher with a mass resolving powers (FWHM) up to 410,000 and an uncertainty of $6\cdot 10^{-8}$. The nuclides were produced and separated in-flight with the fragment separator FRS at 300 to 1000 MeV/u and thermalized in a cryogenic stopping cell. The data-analysis procedure was developed to determine with highest accuracy the mass values and the corresponding uncertainties for the most challenging conditions: down to a few events in a spectrum and overlapping distributions, characterized only by a broader common peak shape. With this procedure, the resolution of low-lying isomers is increased by a factor of up to three compared to standard data analysis. The ground-state masses of 31 short-lived nuclides of 15 different elements with half-lives down to 17.9~ms and count rates as low as 11 events per nuclide were determined. This is the first direct mass measurement for seven nuclides. The excitation energies and the isomer-to-ground state ratios of six isomeric states with excitation energies down to about 280~keV were measured. For nuclides with known mass values, the average relative deviation from the literature values is $(2.9 \pm 6.2) \cdot 10^{-8}$. The measured two-neutron separation energies and their slopes near and at the N=126 and Z=82 shell closures indicate a strong element-dependent binding energy of the first neutron above the closed proton shell Z=82. The experimental results deviate strongly from the theoretical predictions, especially for N=126 and N=127.
△ Less
Submitted 31 January, 2019;
originally announced January 2019.
-
Twin GEM-TPC Prototype (HGB4) Beam Test at GSI - a Development for the Super-FRS at FAIR
Authors:
F. Garcia,
R. Turpeinen,
R. Lauhakangas,
E. Tuominen,
J. Heino,
J. Äystö,
T. Grahn,
S. Rinta-Antilla,
A. Jokinen,
R. Janik,
P. Strmen,
M. Pikna,
B. Sitar,
B. Voss,
J. Kunkel,
V. Kleipa,
A. Gromliuk,
H. Risch,
I. Kaufeld,
C. Caesar,
C. Simon,
M. kìs,
A. Prochazka,
C. Nociforo,
S. Pietri
, et al. (8 additional authors not shown)
Abstract:
The GEM-TPC detector will be part of the standard Super-FRS detection system, as tracker detectors at several focal stations along the separator and its three branches.
The GEM-TPC detector will be part of the standard Super-FRS detection system, as tracker detectors at several focal stations along the separator and its three branches.
△ Less
Submitted 16 December, 2016;
originally announced December 2016.
-
AGATA - Advanced Gamma Tracking Array
Authors:
S. Akkoyun,
A. Algora,
B. Alikhani,
F. Ameil,
G. de Angelis,
L. Arnold,
A. Astier,
A. Ataç,
Y. Aubert,
C. Aufranc,
A. Austin,
S. Aydin,
F. Azaiez,
S. Badoer,
D. L. Balabanski,
D. Barrientos,
G. Baulieu,
R. Baumann,
D. Bazzacco,
F. A. Beck,
T. Beck,
P. Bednarczyk,
M. Bellato,
M. A. Bentley,
G. Benzoni
, et al. (329 additional authors not shown)
Abstract:
The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation gamma-ray spectrometer. AGATA is based on the technique of gamma-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a gamma ray deposits its energy within the…
▽ More
The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation gamma-ray spectrometer. AGATA is based on the technique of gamma-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a gamma ray deposits its energy within the detector volume. Reconstruction of the full interaction path results in a detector with very high efficiency and excellent spectral response. The realization of gamma-ray tracking and AGATA is a result of many technical advances. These include the development of encapsulated highly-segmented germanium detectors assembled in a triple cluster detector cryostat, an electronics system with fast digital sampling and a data acquisition system to process the data at a high rate. The full characterization of the crystals was measured and compared with detector-response simulations. This enabled pulse-shape analysis algorithms, to extract energy, time and position, to be employed. In addition, tracking algorithms for event reconstruction were developed. The first phase of AGATA is now complete and operational in its first physics campaign. In the future AGATA will be moved between laboratories in Europe and operated in a series of campaigns to take advantage of the different beams and facilities available to maximize its science output. The paper reviews all the achievements made in the AGATA project including all the necessary infrastructure to operate and support the spectrometer.
△ Less
Submitted 17 September, 2012; v1 submitted 24 November, 2011;
originally announced November 2011.