Showing 1–27 of 27 results for author: Phillips, M

Characterization of electron density and ionization of a uranium laser produced plasma using laser absorption spectroscopy

Authors: Ryland G. Wala, Mathew P. Polek, Sivanandan S. Harilal, R. Jason Jones, Mark C. Phillips

Abstract: High-resolution tunable laser spectroscopy is used to measure time-resolved absorption spectra for ten neutral uranium transitions and six singly-ionized transitions in a laser produced plasma. Spectral lineshapes are analyzed to determine temporal variations in ion and neutral total column densities, excitation temperatures, kinetic temperatures, and collisional broadening effects as the plasma c… ▽ More High-resolution tunable laser spectroscopy is used to measure time-resolved absorption spectra for ten neutral uranium transitions and six singly-ionized transitions in a laser produced plasma. Spectral lineshapes are analyzed to determine temporal variations in ion and neutral total column densities, excitation temperatures, kinetic temperatures, and collisional broadening effects as the plasma cools. Comparison of ion to neutral column densities shows a ratio greater than 10 at times $<$ 15 $μ$s after plasma onset, with the ratio not reaching unity until $\sim$50 $μ$s. Spectral lineshapes are analyzed to separate Stark and van der Waals contributions to collisional broadening, from which electron densities are determined and found to decrease from $\sim$10$^{15}$-10$^{13} $cm$^{-3}$ over times from 4-25 $μ$s. Using absorption spectroscopy to determine charge properties and electron density over these time scales and at low magnitudes provides valuable insight into plasma properties not obtainable using conventional emission spectroscopy. Comparisons between ion and neutral densities, excitation temperatures, kinetic temperatures, and electron densities could indicate potential deviations from local thermodynamic equilibrium and Saha ionization predictions. △ Less

Submitted 3 March, 2025; originally announced March 2025.

Comments: 18 pages, 8 figures

Three-dimensional Structure of Incomplete Carbon-Oxygen Detonations in Type Ia Supernovae

Authors: A. Khokhlov, I. Dominguez, A. Y. Chtchelkanova, P. Hoeflich, E. Baron, K. Krisciunas, M. Phillips, N. Suntzeff, L. Wang

Abstract: Carbon-oxygen (CO) detonation with reactions terminating either after burning of C$^{12}$ in the leading C$^{12}$ + C$^{12}$ reaction or after burning of C$^{12}$ and O$^{16}$ to Si-group elements may occur in the low-density outer layers of exploding white dwarfs and be responsible for the production of intermediate-mass elements observed in the outer layers of Type Ia supernovae. Basic one-dimen… ▽ More Carbon-oxygen (CO) detonation with reactions terminating either after burning of C$^{12}$ in the leading C$^{12}$ + C$^{12}$ reaction or after burning of C$^{12}$ and O$^{16}$ to Si-group elements may occur in the low-density outer layers of exploding white dwarfs and be responsible for the production of intermediate-mass elements observed in the outer layers of Type Ia supernovae. Basic one-dimensional properties of CO-detonations have been summarized in our previous work. This paper presents the results of two- and three-dimensional numerical simulations of low-density CO-detonations and discusses their multidimensional stability, cellular structure, and propagation through a constant low-density background. We find three-dimensional CO detonations to be strikingly different from their one-dimensional and two-dimensional counterparts. Three-dimensional detonations are significantly more robust and capable of propagating without decay compared to highly unstable and marginal one- and two- dimensional detonations. The detonation cell size and whether burning of C$^{12}$ in a three-dimensional detonation wave is followed by the subsequent O$^{16}$ burning is sensitive to both the background density and the initial C$^{12}$ to O$^{16}$ mass ratio. We also discuss the possible implications for understanding the observed early time bumps in light-curves. △ Less

Submitted 31 January, 2025; originally announced January 2025.

Comments: 29 pages, 15 Figures; ApJ, submitted (11/26/2024), revised (1/14/2025), accepted(1/25/2025), in press

Instructing nontraditional physics labs: Toward responsiveness to student epistemic framing

Authors: Meagan Sundstrom, Rebeckah K. Fussell, Anna McLean Phillips, Mark Akubo, Scott E. Allen, David Hammer, Rachel E. Scherr, N. G. Holmes

Abstract: Research on nontraditional laboratory (lab) activities in physics shows that students often expect to verify predetermined results, as takes place in traditional activities. This understanding of what is taking place, or epistemic framing, may impact their behaviors in the lab, either productively or unproductively. In this paper, we present an analysis of student epistemic framing in a nontraditi… ▽ More Research on nontraditional laboratory (lab) activities in physics shows that students often expect to verify predetermined results, as takes place in traditional activities. This understanding of what is taking place, or epistemic framing, may impact their behaviors in the lab, either productively or unproductively. In this paper, we present an analysis of student epistemic framing in a nontraditional lab to understand how instructional context, specifically instructor behaviors, may shape student framing. We present video data from a lab section taught by an experienced teaching assistant (TA), with 19 students working in seven groups. We argue that student framing in this lab is evidenced by whether or not students articulate experimental predictions and by the extent to which they take up opportunities to construct knowledge (epistemic agency). We show that the TA's attempts to shift student frames generally succeed with respect to experimental predictions but are less successful with respect to epistemic agency. In part, we suggest, the success of the TA's attempts reflects whether and how they are responsive to students' current framing. This work offers evidence that instructors can shift students' frames in nontraditional labs, while also illuminating the complexities of both student framing and the role of the instructor in shifting that framing in this context. △ Less

Submitted 28 April, 2023; originally announced April 2023.

Comments: Submitted to Physical Review Physics Education Research

Room-temperature oxygen transport in nano-thin BixOySez enables precision modulation of 2D materials

Authors: Zachariah Hennighausen, Bethany M. Hudak, Madeleine Phillips, Jisoo Moon, Kathleen M. McCreary, Hsun-Jen Chuang, Matthew R. Rosenberger, Berend T. Jonker, Connie H. Li, Rhonda M. Stroud, Olaf M. van't Erve

Abstract: Oxygen conductors and transporters are important to several consequential renewable energy technologies, including fuel cells and syngas production. Separately, monolayer transition metal dichalcogenides (TMDs) have demonstrated significant promise for a range of applications, including quantum computing, advanced sensors, valleytronics, and next-gen optoelectronics. Here, we synthesize a few nano… ▽ More Oxygen conductors and transporters are important to several consequential renewable energy technologies, including fuel cells and syngas production. Separately, monolayer transition metal dichalcogenides (TMDs) have demonstrated significant promise for a range of applications, including quantum computing, advanced sensors, valleytronics, and next-gen optoelectronics. Here, we synthesize a few nanometer-thick BixOySez compound that strongly resembles a rare R3m bismuth oxide (Bi2O3) phase, and combine it with monolayer TMDs, which are highly sensitive to their environment. We use the resulting 2D heterostructure to study oxygen transport through BixOySez into the interlayer region, whereby the 2D material properties are modulated, finding extraordinarily fast diffusion at room temperature under laser exposure. The oxygen diffusion enables reversible and precise modification of the 2D material properties by controllably intercalating and deintercalating oxygen. Changes are spatially confined, enabling submicron features (e.g. pixels), and are long-term stable for more than 221 days. Our work suggests few nanometer-thick BixOySez is a promising unexplored room-temperature oxygen transporter. Additionally, our findings suggest the mechanism can be applied to other 2D materials as a generalized method to manipulate their properties with high precision and submicron spatial resolution. △ Less

Submitted 13 March, 2022; originally announced March 2022.

Physicality, Modeling and Making in a Computational Physics Class

Authors: Anna M. Phillips, Ezra J. Gouvea, Brian E. Gravel, Pierre-Hugues Beauchemin, Timothy J. Atherton

Abstract: Computation is intertwined with essentially all aspects of physics research and is invaluable for physicists' careers. Despite its disciplinary importance, integration of computation into physics education remains a challenge and, moreover, has tended to be constructed narrowly as a route to solving physics problems. Here, we broaden Physics Education Research's conception of computation by constr… ▽ More Computation is intertwined with essentially all aspects of physics research and is invaluable for physicists' careers. Despite its disciplinary importance, integration of computation into physics education remains a challenge and, moreover, has tended to be constructed narrowly as a route to solving physics problems. Here, we broaden Physics Education Research's conception of computation by constructing an epistemic \emph{metamodel} -- a model of modeling -- incorporating insights on computational modeling from the philosophy of science and prior work. The metamodel is formulated in terms of practices, things physicists do, and how these inform one another. We operationalize this metamodel in an educational environment that incorporates making, the creation of shared physical and digital artifacts, intended to promote students' agency, creativity and self-expression alongside doing physics. We present a content analysis of student work from initial implementations of this approach to illustrate the very complex epistemic maneuvers students make as they engaged in computational modeling. We demonstrate how our metamodel can be used to understand student practices, and conclude with implications of the metamodel for instruction and future research. △ Less

Submitted 7 December, 2022; v1 submitted 8 March, 2022; originally announced March 2022.

Spatiotemporal evolution of emission and absorption signatures in a laser-produced plasma

Authors: Sivanandan S. Harilal, Elizabeth J. Kautz, Mark C. Phillips

Abstract: We report spatiotemporal evolution of emission and absorption signatures of Al species in a nanosecond (ns) laser-produced plasma (LPP). The plasmas were generated from an Inconel target, which contained $\sim $ 0.4 wt.% Al, using 1064 nm, ~ 6 ns full width half maximum pulses from an Nd:YAG laser at an Ar cover gas pressure of ~ 34 Torr. The temporal distributions of the Al I (394.4 nm) transitio… ▽ More We report spatiotemporal evolution of emission and absorption signatures of Al species in a nanosecond (ns) laser-produced plasma (LPP). The plasmas were generated from an Inconel target, which contained $\sim $ 0.4 wt.% Al, using 1064 nm, ~ 6 ns full width half maximum pulses from an Nd:YAG laser at an Ar cover gas pressure of ~ 34 Torr. The temporal distributions of the Al I (394.4 nm) transition were collected from various spatial points within the plasma employing time-of-flight (TOF) emission and laser absorption spectroscopy and they provide kinetics of the excited state and ground state population of the selected transition. The emission and absorption signatures showed multiple peaks in their temporal profiles, although they appeared at different spatial locations and times after the plasma onset. The absorption temporal profiles showed an early time signature representing shock wave propagation into the ambient gas. We also used emission and absorption spectral features for measuring various physical properties of the plasma. The absorption spectral profiles are utilized for measuring linewidths, column density, and kinetic temperature while emission spectra were used to measure excitation temperature. A comparison between excitation and the kinetic temperature was made at various spatial points in the plasma. Our results highlight that the TOF measurements provide a resourceful tool for showing the spatiotemporal LPP dynamics with higher spatial and temporal resolution than is possible with spectral measurements but are difficult to interpret without additional information on excitation temperatures and linewidths. The combination of absorption and emission TOF and spectral measurements thus provides a more complete picture of LPP spatiotemporal dynamics than is possible using any one technique alone. △ Less

Submitted 25 January, 2022; originally announced January 2022.

Comments: 22 Figures

Report number: PNNL-SA-168683

Journal ref: Journal of Applied Physics (2022)

Optical diagnostics of laser-produced plasmas

Authors: S. S. Harilal, M. C. Phillips, D. H. Froula, K. K. Anoop, R. C. Issac, F. N. Beg

Abstract: Laser-produced plasmas (LPPs) engulf exotic and complex conditions ranging in temperature, density, pressure, magnetic and electric fields, charge states, charged particle kinetics, and gas-phase reactions, based on the irradiation conditions, target geometries, and the background cover gas. The application potential of the LPP is so diverse that it generates considerable interest for both basic a… ▽ More Laser-produced plasmas (LPPs) engulf exotic and complex conditions ranging in temperature, density, pressure, magnetic and electric fields, charge states, charged particle kinetics, and gas-phase reactions, based on the irradiation conditions, target geometries, and the background cover gas. The application potential of the LPP is so diverse that it generates considerable interest for both basic and applied research areas. Although most of the traditional characterization techniques developed for other plasma sources can be used to characterize the LPPs, care must be taken to interpret the results because of their small size, transient nature, and inhomogeneities. The existence of the large spatiotemporal density and temperature gradients often necessitates non-uniform weighted averaging over distance and time. Among the various plasma characterization tools, optical-based diagnostic tools play a key role in the accurate measurements of LPP parameters. The optical toolbox contains optical probing methods (Thomson scattering, shadowgraphy, Schlieren, interferometry, velocimetry, and deflectometry), optical spectroscopy (emission, absorption, and fluorescence), and passive and active imaging. Each technique is useful for measuring a specific property, and its use is limited to a certain time span during the LPP evolution because of the sensitivity issues related to the selected measuring tool. Therefore, multiple diagnostic tools are essential for a comprehensive insight into the entire plasma behavior. In recent times, the improvements in performance in the lasers and detector systems expanded the capability of the aforementioned passive and active diagnostics tools. This review provides an overview of optical diagnostic tools frequently employed for the characterization of the LPPs and emphasizes techniques, associated assumptions, and challenges. △ Less

Submitted 15 August, 2022; v1 submitted 21 January, 2022; originally announced January 2022.

Comments: 44 pages, 31 figures

Report number: PNNL-SA-162786

Journal ref: Reviews of Modern Physics, 94(3), 035002 (2022)

Highly Optimized Full-Core Reactor Simulations on Summit

Authors: Paul Fischer, Elia Merzari, Misun Min, Stefan Kerkemeier, Yu-Hsiang Lan, Malachi Phillips, Thilina Rathnayake, April Novak, Derek Gaston, Noel Chalmers, Tim Warburton

Abstract: Nek5000/RS is a highly-performant open-source spectral element code for simulation of incompressible and low-Mach fluid flow, heat transfer, and combustion with a particular focus on turbulent flows in complex domains. It is based on high-order discretizations that realize the same (or lower) cost per gridpoint as traditional low-order methods. State-of-the-art multilevel preconditioners, efficien… ▽ More Nek5000/RS is a highly-performant open-source spectral element code for simulation of incompressible and low-Mach fluid flow, heat transfer, and combustion with a particular focus on turbulent flows in complex domains. It is based on high-order discretizations that realize the same (or lower) cost per gridpoint as traditional low-order methods. State-of-the-art multilevel preconditioners, efficient high-order time-splitting methods, and runtime-adaptive communication strategies are built on a fast OCCA-based kernel library, libParanumal, to provide scalability and portability across the spectrum of current and future high-performance computing platforms. On Summit, Nek5000/RS has recently achieved an milestone in the simulation of nuclear reactors: the first full-core computational fluid dynamics simulations of reactor cores, including pebble beds with > 350,000 pebbles and 98M elements advanced in less than 0.25 seconds per Navier-Stokes timestep. With carefully tuned algorithms, it is possible to simulate a single flow-through time for a full reactor core in less than six hours on all of Summit. △ Less

Submitted 1 October, 2021; originally announced October 2021.

Comments: 9 pages, 3 figures, 6 tables

MSC Class: 35-04 ACM Class: D.0; F.2; G.2; G.4; I.6; J.2

Not engaging with problems in the lab: Students' navigation of conflicting data and models

Authors: Anna McLean Phillips, Meagan Sundstrom, David G. Wu, N. G. Holmes

Abstract: With the adoption of instructional laboratories (labs) that require students to make their own decisions, there is a need to better understand students' activities as they make sense of their data and decide how to proceed. In particular, understanding when students do not engage productively with unexpected data may provide insights into how to better support students in more open-ended labs. We… ▽ More With the adoption of instructional laboratories (labs) that require students to make their own decisions, there is a need to better understand students' activities as they make sense of their data and decide how to proceed. In particular, understanding when students do not engage productively with unexpected data may provide insights into how to better support students in more open-ended labs. We examine video and audio data from groups within a lab session where students were expected to find data inconsistent with the predictions of two models. In prior work, we examined the actions of the four groups that productively grapple with this designed problem. Here, we analyze the engagement of the three groups that do not. We conducted three phases of analysis: 1) documenting large scale behaviors and time spent in on-topic discussion, 2) analyzing interactions with the teaching assistant, and 3) identifying students' framing--their expectations for what is taking place--when they were discussing their data. Our Phase 1 and 2 analysis show only minor differences between the groups that engaged with the problem and those that did not. Our Phase 3 analysis demonstrated that the groups that did not engage with the problem framed the lab activity as about confirming a known result or as a series of hoops to jump through to fulfill assignment requirements. Implications for instruction include supporting teaching assistants to attend to students' framing and agency within laboratory classrooms. △ Less

Submitted 2 March, 2021; originally announced March 2021.

Journal ref: Phys. Rev. Phys. Educ. Res. 17, 020112 (2021)

A Library of Self-Consistent Simulated Exoplanet Atmospheres

Authors: Jayesh M. Goyal, Nathan Mayne, Benjamin Drummond, David K. Sing, Eric Hébrard, Nikole Lewis, Pascal Tremblin, Mark W. Phillips, Thomas Mikal-Evans, Hannah R. Wakeford

Abstract: We present a publicly available library of model atmospheres with radiative-convective equilibrium Pressure-Temperature ($P$-$T$) profiles fully consistent with equilibrium chemical abundances, and the corresponding emission and transmission spectrum with R$\sim$5000 at 0.2 $μ$m decreasing to R$\sim$35 at 30 $μ$m, for 89 hot Jupiter exoplanets, for four re-circulation factors, six metallicities an… ▽ More We present a publicly available library of model atmospheres with radiative-convective equilibrium Pressure-Temperature ($P$-$T$) profiles fully consistent with equilibrium chemical abundances, and the corresponding emission and transmission spectrum with R$\sim$5000 at 0.2 $μ$m decreasing to R$\sim$35 at 30 $μ$m, for 89 hot Jupiter exoplanets, for four re-circulation factors, six metallicities and six C/O ratios. We find the choice of condensation process (local/rainout) alters the $P$-$T$ profile and thereby the spectrum substantially, potentially detectable by JWST. We find H$^-$ opacity can contribute to form a strong temperature inversion in ultra-hot Jupiters for C/O ratios $\geq$ 1 and can make transmission spectra features flat in the optical, alongside altering the entire emission spectra. We highlight how adopting different model choices such as thermal ionisation, opacities, line-wing profiles and the methodology of varying the C/O ratio, effects the $P$-$T$ structure and the spectrum. We show the role of Fe opacity to form primary/secondary inversion in the atmosphere. We use WASP-17b and WASP-121b as test cases to demonstrate the effect of grid parameters across their full range, while highlighting some important findings, concerning the overall atmospheric structure, chemical transition regimes and their observables. Finally, we apply this library to the current transmission and emission spectra observations of WASP-121b, which shows H$_2$O and tentative evidence for VO at the limb, and H$_2$O emission feature indicative of inversion on the dayside, with very low energy redistribution, thereby demonstrating the applicability of library for planning and interpreting observations of transmission and emission spectrum. △ Less

Submitted 4 August, 2020; originally announced August 2020.

Comments: 26 pages, 19 figures in the main paper. 13 pages, 6 figures, 3 tables in the supplementary material attached with the main paper here. Accepted for Publication in MNRAS. Full grid of model P-T profiles, chemical abundances, transmission and emission spectra, contribution functions are available here, https://drive.google.com/drive/folders/1zCCe6HICuK2nLgnYJFal7W4lyunjU4JE

Red Luminescence in H-doped beta-Ga2O3

Authors: Thanh Tung Huynh, Ekaterine Chikoidze, Curtis P. Irvine, Muhammad Zakria, Yves Dumont, Ferechteh H. Teherani, Eric V. Sandana, Philippe Bove, David J. Rogers, Matthew R. Phillips, Cuong Ton-That

Abstract: The effects of hydrogen incorporation into beta-Ga2O3 thin films have been investigated by chemical, electrical and optical characterization techniques. Hydrogen incorporation was achieved by remote plasma doping without any structural alterations of the film; however, X-ray photoemission reveals major changes in the oxygen chemical environment. Depth-resolved cathodoluminescence (CL) reveals that… ▽ More The effects of hydrogen incorporation into beta-Ga2O3 thin films have been investigated by chemical, electrical and optical characterization techniques. Hydrogen incorporation was achieved by remote plasma doping without any structural alterations of the film; however, X-ray photoemission reveals major changes in the oxygen chemical environment. Depth-resolved cathodoluminescence (CL) reveals that the near-surface region of the H-doped Ga2O3 film exhibits a distinct red luminescence (RL) band at 1.9 eV. The emergence of the H-related RL band is accompanied by an enhancement in the electrical conductivity of the film by an order of magnitude. Temperature-resolved CL points to the formation of abundant H-related donors with a binding energy of 28 +/- 4 meV. The RL emission is attributed to shallow donor-deep acceptor pair recombination, where the acceptor is a VGa-H complex and the shallow donor is interstitial H. The binding energy of the VGa-H complex, based on our experimental considerations, is consistent with the computational results by Varley et al [J. Phys.: Condens. Matter, 23, 334212, 2011]. △ Less

Submitted 15 July, 2020; v1 submitted 27 May, 2020; originally announced May 2020.

Comments: 3 figures

Journal ref: Phys. Rev. Materials 4, 085201 (2020)

Hysteresis Effects in Social Behavior with Parasitic Infection

Authors: Michael Phillips

Abstract: Recent work has found that the behavior of an individual can be altered when infected by a parasite. Here we explore the question: under what conditions, in principle, can a general parasitic infection control system-wide social behaviors? We analyze fixed points and hysteresis effects under the Master Equation, with transitions between two behaviors given two different subpopulations, healthy vs.… ▽ More Recent work has found that the behavior of an individual can be altered when infected by a parasite. Here we explore the question: under what conditions, in principle, can a general parasitic infection control system-wide social behaviors? We analyze fixed points and hysteresis effects under the Master Equation, with transitions between two behaviors given two different subpopulations, healthy vs. parasitically-infected, within a population which is kept fixed overall. The key model choices are: (i) the internal opinion of infected humans may differ from that of the healthy population, (ii) the extent that interaction drives behavioral changes may also differ, and (iii) indirect interactions are most important. We find that the socio-configuration can be controlled by the parasitically-infected population, under some conditions, even if the healthy population is the majority and of opposite opinion. △ Less

Submitted 9 June, 2020; v1 submitted 20 October, 2019; originally announced October 2019.

Comments: 7 pages, 6 figures; accepted in Journal of Statistical Physics (2020)

Enhancement of the UV emission from gold/ZnO nanorods exhibiting no green luminescence

Authors: Saskia Fiedler, Laurent O. Lee Cheong Lem, Cuong Ton-That, Axel Hoffmann, Matthew R. Phillips

Abstract: Large reflection losses at interfaces in light emitting semiconductor devices cause a significant reduction in their light emission and energy efficiencies. Metal nanoparticle (NP) surface coatings have been demonstrated to increase the light extraction efficiency from planar high refractive index semiconductor surfaces. This emission enhancement in Au NP-coated ZnO is widely attributed to involve… ▽ More Large reflection losses at interfaces in light emitting semiconductor devices cause a significant reduction in their light emission and energy efficiencies. Metal nanoparticle (NP) surface coatings have been demonstrated to increase the light extraction efficiency from planar high refractive index semiconductor surfaces. This emission enhancement in Au NP-coated ZnO is widely attributed to involvement of a green (~ 2.5 eV) deep level ZnO defect exciting localized surface plasmons in the NPs that non-radiatively decay into hot electrons, which return to ZnO and radiatively recombine. In this work, we achieve a 6 times enhancement of the ultra-violet excitonic emission in ZnO nanorods that are coated with 5 nm Au NPs without the aid of ZnO defects. Cathodoluminescence (CL), photoluminescence (PL) and a novel concurrent CL-PL technique as well as time resolved PL spectroscopy revealed that the increase in UV emission is due to the formation of an additional fast excitonic relaxation pathway that increases the exciton spontaneous emission rate. Concurrent CL-PL measurements ruled out the presence of charge transfer mechanism in the emission enhancement process. While time resolved PL results confirmed the existence of a new excitonic recombination channel that is attributed to exciton relaxation via the plasmon-assisted excitation of rapid non-radiative Au interband transitions. Our results establish that ZnO defect levels ~ 2.5 eV are not required to facilitate Au NP induced enhancement of the ZnO UV emission. △ Less

Submitted 14 October, 2019; originally announced October 2019.

The role of surface depletion layer effects on the enhancement of the UV emission in ZnO induced by a nanostructured Al surface coating

Authors: Saskia Fiedler, Laurent O. Lee Cheong Lem, Cuong Ton-That, Matthew R. Phillips

Abstract: The UV enhancement of Al-coated ZnO single crystals with a wide range of carrier densities is systematically studied using depth-resolved cathodoluminescence (CL) and photoluminescence (PL) as well as valence band X-ray photoemission spectroscopy (VB-XPS). AN up to 17-fold enhanced PL UV emission for Al-coated ZnO with the highest carrier density (2 x 10^17 cm^-3) was measured, which falls to a 12… ▽ More The UV enhancement of Al-coated ZnO single crystals with a wide range of carrier densities is systematically studied using depth-resolved cathodoluminescence (CL) and photoluminescence (PL) as well as valence band X-ray photoemission spectroscopy (VB-XPS). AN up to 17-fold enhanced PL UV emission for Al-coated ZnO with the highest carrier density (2 x 10^17 cm^-3) was measured, which falls to a 12-fold increase for the lowest carrier density (3 x 10^13 cm^-3). Depth-resolved CL measurements confirm that the enhancement is strongest near the metal coating-ZnO interface consistent with an increased UV emission due to an exciton-localized surface plasmon coupling mechanism. Correlative CL, PL and VB-XPS studies reveal that a number of additional effects to the presence of the Al surface coating also contribute to the UV enhancement factor. These include increased UV enhancement due to the formation of a surface depletion layer induced by the metal surface coating, which also passivates competitive non-radiative surface recombination channels found in uncoated ZnO. Significantly, it was established that the magnitude of the emission enhancement factor can be raised in a controlled way by reducing the thickness of the depletion layer by increasing the carrier density. The contribution of these effects collectively provides an explanation for the large span of enhancement factors reported in the literature. △ Less

Submitted 22 August, 2019; originally announced August 2019.

Comments: 22 pages, 10 figures

Correlative Study of Enhanced Excitonic Emission in ZnO Coated with Al Nanoparticles using Electron and Laser Excitation

Authors: Saskia Fiedler, Laurent O. Lee, Cheong Lem, Markus Schleuning, Axel Hoffmann, Cuong Ton-That, Matthew R. Phillips

Abstract: Metal nanoparticle (NP) surface coatings are known to significantly enhance the ultra-violet luminescence intensity of ZnO. Although there is general agreement that resonantly excited Localized Surface Plasmons (LSPs) in metal NPs can directly couple to excitons in the semiconductor increasing their spontaneous emission rate, the exact mechanisms involved in this phenomenon are currently not fully… ▽ More Metal nanoparticle (NP) surface coatings are known to significantly enhance the ultra-violet luminescence intensity of ZnO. Although there is general agreement that resonantly excited Localized Surface Plasmons (LSPs) in metal NPs can directly couple to excitons in the semiconductor increasing their spontaneous emission rate, the exact mechanisms involved in this phenomenon are currently not fully understood. In this work, LSP-exciton coupling in a ZnO single crystal and ZnO nanorods coated with a 2 nm Al layer has been investigated using correlative photoluminescence and depth-resolved cathodoluminescence and time-resolved photoluminescence spectroscopy. Temperature-resolved cathodoluminescence and photoluminescence measurements from 10 K to 250 K show enhancement factors up to 12 times of the free exciton (FX) emission at 80 K. The FX couple more efficiently to the LSPs in Al compared to the localized donor-bound excitons. Furthermore, a strong polarization dependence of the LSPs with respect to the FX was observed with higher enhanced FX transitions polarized in the same direction as the electric field of the incident excitation. These results indicate that selective enhancement of the ultra-violet excitonic PL in ZnO can be achieved by careful alignment of the crystallographic axes of the ZnO relative to the electric vector of the excitation source. △ Less

Submitted 16 August, 2019; originally announced August 2019.

Comments: 20 pages, 9 figures

Electroluminescence from isolated defects in zinc oxide, towards electrically triggered single photon sources at room temperature

Authors: Sumin Choi, Amanuel M. Berhane, Angus Gentle, Cuong Ton-That, Matthew R Phillips, Igor Aharonovich

Abstract: Single photon sources are required for a wide range of applications in quantum information science, quantum cryptography and quantum communications. However, so far majority of room temperature emitters are only excited optically, which limits their proper integration into scalable devices. In this work, we overcome this limitation and present room temperature electrically triggered light emission… ▽ More Single photon sources are required for a wide range of applications in quantum information science, quantum cryptography and quantum communications. However, so far majority of room temperature emitters are only excited optically, which limits their proper integration into scalable devices. In this work, we overcome this limitation and present room temperature electrically triggered light emission from localized defects in zinc oxide (ZnO) nanoparticles and thin films. The devices emit at the red spectral range and show excellent rectifying behavior. The emission is stable over an extensive period of time, providing an important prerequisite for practical devices. Our results open up possibilities to build new ZnO based quantum integrated devices that incorporate solid-state single photon sources for quantum information technologies. △ Less

Submitted 12 February, 2015; originally announced February 2015.

Simulations of an ultracold, neutral plasma with equal masses

Authors: F. Robicheaux, B. J. Bender, M. A. Phillips

Abstract: The results of a theoretical investigation of an ultracold, neutral plasma composed of equal mass positive and negative charges are reported. In our simulations, the plasma is created by the fast dissociation of a neutral particle. The temperature of the plasma is controlled by the relative energy of the dissociation. We studied the early time evolution of this system where the initial energy was… ▽ More The results of a theoretical investigation of an ultracold, neutral plasma composed of equal mass positive and negative charges are reported. In our simulations, the plasma is created by the fast dissociation of a neutral particle. The temperature of the plasma is controlled by the relative energy of the dissociation. We studied the early time evolution of this system where the initial energy was tuned so that the plasma is formed in the strongly coupled regime. In particular, we present results on the temperature evolution and three body recombination. In the weakly coupled regime, we studied how an expanding plasma thermalizes and how the scattering between ions affects the expansion. Because the expansion causes the density to drop, the velocity distribution only evolves for a finite time with the final distribution depending on the number of particles and initial temperature of the plasma. △ Less

Submitted 21 August, 2014; originally announced August 2014.

Simulations of prompt many-body ionization in a frozen Rydberg gas

Authors: F. Robicheaux, M. M. Goforth, M. A. Phillips

Abstract: The results of a theoretical investigation of prompt many-body ionization are reported. Our calculations address an experiment that reported ionization in Rydberg gases for densities two orders of magnitude less than expected from ionization between pairs of atoms. The authors argued that the results were due to the simultaneous interaction between many atoms. We performed classical calculations f… ▽ More The results of a theoretical investigation of prompt many-body ionization are reported. Our calculations address an experiment that reported ionization in Rydberg gases for densities two orders of magnitude less than expected from ionization between pairs of atoms. The authors argued that the results were due to the simultaneous interaction between many atoms. We performed classical calculations for many interacting Rydberg atoms with the ions fixed in space and have found that the many atom interaction does allow ionization at lower densities than estimates from two atom interactions. However, we found that the density fluctuations in a gas play a larger role. These two effects are an order of magnitude too small to account for the experimental results suggesting at least one other mechanism strongly affects ionization. △ Less

Submitted 13 June, 2014; originally announced June 2014.

Single photon emission from ZnO nanoparticles

Authors: Sumin Choi, Brett C. Johnson, Stefania Castelletto, Cuong Ton-That, Matthew R. Phillips, Igor Aharonovich

Abstract: Room temperature single photon emitters are very important resources for photonics and emerging quantum technologies. In this work we study single photon emission from defect centers in 20 nm zinc oxide (ZnO) nanoparticles. The emitters exhibit bright broadband fluorescence in the red spectral range centered at 640 nm with polarized excitation and emission. The studied emitters showed continuous b… ▽ More Room temperature single photon emitters are very important resources for photonics and emerging quantum technologies. In this work we study single photon emission from defect centers in 20 nm zinc oxide (ZnO) nanoparticles. The emitters exhibit bright broadband fluorescence in the red spectral range centered at 640 nm with polarized excitation and emission. The studied emitters showed continuous blinking, however, bleaching can be suppressed using a polymethyl methacrylate (PMMA) coating. Furthermore, hydrogen termination increased the density of single photon emitters. Our results will contribute to the identification of quantum systems in ZnO. △ Less

Submitted 5 March, 2014; originally announced March 2014.

Two novel methods for studying lowest frequency Earth oscillations before earthquakes

Authors: Randall D. Peters, Michael A. Phillips

Abstract: Two novel methods, one that is experimental and the other comprising a pair of theoretical types (one component that is mathematically rigorous and the other that is of frequency domain computational type), are being used in concert to study the motion of the Earth at periods in the neighborhood of 1000 s to beyond 10,000 s. Corresponding to frequencies lower than what is routinely measured by com… ▽ More Two novel methods, one that is experimental and the other comprising a pair of theoretical types (one component that is mathematically rigorous and the other that is of frequency domain computational type), are being used in concert to study the motion of the Earth at periods in the neighborhood of 1000 s to beyond 10,000 s. Corresponding to frequencies lower than what is routinely measured by commercial seismographs, our observations are yielding new insights into the mysteries of Earth dynamics responsible for earthquakes. △ Less

Submitted 28 October, 2013; originally announced February 2014.

Comments: 4 pages, 3 figures

The PHENIX Forward Silicon Vertex Detector

Authors: C. Aidala, L. Anaya, E. Anderssen, A. Bambaugh, A. Barron, J. G. Boissevain, J. Bok, S. Boose, M. L. Brooks, S. Butsyk, M. Cepeda, P. Chacon, S. Chacon, L. Chavez, T. Cote, C. D'Agostino, A. Datta, K. DeBlasio, L. DelMonte, E. J. Desmond, J. M. Durham, D. Fields, M. Finger, C. Gingu, B. Gonzales , et al. (60 additional authors not shown)

Abstract: A new silicon detector has been developed to provide the PHENIX experiment with precise charged particle tracking at forward and backward rapidity. The Forward Silicon Vertex Tracker (FVTX) was installed in PHENIX prior to the 2012 run period of the Relativistic Heavy Ion Collider (RHIC). The FVTX is composed of two annular endcaps, each with four stations of silicon mini-strip sensors, covering a… ▽ More A new silicon detector has been developed to provide the PHENIX experiment with precise charged particle tracking at forward and backward rapidity. The Forward Silicon Vertex Tracker (FVTX) was installed in PHENIX prior to the 2012 run period of the Relativistic Heavy Ion Collider (RHIC). The FVTX is composed of two annular endcaps, each with four stations of silicon mini-strip sensors, covering a rapidity range of $1.2<|η|<2.2$ that closely matches the two existing PHENIX muon arms. Each station consists of 48 individual silicon sensors, each of which contains two columns of mini-strips with 75 $μ$m pitch in the radial direction and lengths in the $φ$ direction varying from 3.4 mm at the inner radius to 11.5 mm at the outer radius. The FVTX has approximately 0.54 million strips in each endcap. These are read out with FPHX chips, developed in collaboration with Fermilab, which are wire bonded directly to the mini-strips. The maximum strip occupancy reached in central Au-Au collisions is approximately 2.8%. The precision tracking provided by this device makes the identification of muons from secondary vertices away from the primary event vertex possible. The expected distance of closest approach (DCA) resolution of 200 $μ$m or better for particles with a transverse momentum of 5 GeV/$c$ will allow identification of muons from relatively long-lived particles, such as $D$ and $B$ mesons, through their broader DCA distributions. △ Less

Submitted 14 February, 2014; v1 submitted 14 November, 2013; originally announced November 2013.

Comments: version submitted to NIM

When is Better Best? A multiobjective perspective

Authors: Mark Phillips, Clay Holdsworth

Abstract: Purpose: To identify the most informative methods for reporting results of treatment planning comparisons. Methods: Seven papers from the past year of International Journal of Radiation Oncology Biology Physics reported on comparisons of treatment plans for IMRT and IMAT. The papers were reviewed to identify methods of comparisons. Decision theoretical concepts were used to evaluate the study me… ▽ More Purpose: To identify the most informative methods for reporting results of treatment planning comparisons. Methods: Seven papers from the past year of International Journal of Radiation Oncology Biology Physics reported on comparisons of treatment plans for IMRT and IMAT. The papers were reviewed to identify methods of comparisons. Decision theoretical concepts were used to evaluate the study methods and highlight those that provide the most information. Results: None of the studies examined the correlation between objectives. Statistical comparisons provided some information but not enough to make provide support for a robust decision analysis. Conclusion: The increased use of treatment planning studies to evaluate different methods in radiation therapy requires improved standards for designing the studies and reporting the results. △ Less

Submitted 16 February, 2012; originally announced February 2012.

Journal ref: Medical Phys, 38: 1635-1640, 2011

A Hierachical Evolutionary Algorithm for Multiobjective Optimization in IMRT

Authors: Clay Holdsworth, Minsun Kim, Jay Liao, Mark H Phillips

Abstract: Purpose: Current inverse planning methods for IMRT are limited because they are not designed to explore the trade-offs between the competing objectives between the tumor and normal tissues. Our goal was to develop an efficient multiobjective optimization algorithm that was flexible enough to handle any form of objective function and that resulted in a set of Pareto optimal plans. Methods: We dev… ▽ More Purpose: Current inverse planning methods for IMRT are limited because they are not designed to explore the trade-offs between the competing objectives between the tumor and normal tissues. Our goal was to develop an efficient multiobjective optimization algorithm that was flexible enough to handle any form of objective function and that resulted in a set of Pareto optimal plans. Methods: We developed a hierarchical evolutionary multiobjective algorithm designed to quickly generate a diverse Pareto optimal set of IMRT plans that meet all clinical constraints and reflect the trade-offs in the plans. The top level of the hierarchical algorithm is a multiobjective evolutionary algorithm (MOEA). The genes of the individuals generated in the MOEA are the parameters that define the penalty function minimized during an accelerated deterministic IMRT optimization that represents the bottom level of the hierarchy. The MOEA incorporates clinical criteria to restrict the search space through protocol objectives and then uses Pareto optimality among the fitness objectives to select individuals. Results: Acceleration techniques implemented on both levels of the hierarchical algorithm resulted in short, practical runtimes for optimizations. The MOEA improvements were evaluated for example prostate cases with one target and two OARs. The modified MOEA dominated 11.3% of plans using a standard genetic algorithm package. By implementing domination advantage and protocol objectives, small diverse populations of clinically acceptable plans that were only dominated 0.2% by the Pareto front could be generated in a fraction of an hour. Conclusions: Our MOEA produces a diverse Pareto optimal set of plans that meet all dosimetric protocol criteria in a feasible amount of time. It optimizes not only beamlet intensities but also objective function parameters on a patient-specific basis. △ Less

Submitted 16 February, 2012; originally announced February 2012.

Journal ref: Medical Physics, 37: 4986-4997, 2010

Structural Optimisation: Biomechanics of the Femur

Authors: Andrew T. M. Phillips

Abstract: A preliminary iterative 3D meso-scale structural model of the femur was developed, in which bar and shell elements were used to represent trabecular and cortical bone respectively. The cross-sectional areas of the bar elements and the thickness values of the shell elements were adjusted over successive iterations of the model based on a target strain stimulus, resulting in an optimised construct.… ▽ More A preliminary iterative 3D meso-scale structural model of the femur was developed, in which bar and shell elements were used to represent trabecular and cortical bone respectively. The cross-sectional areas of the bar elements and the thickness values of the shell elements were adjusted over successive iterations of the model based on a target strain stimulus, resulting in an optimised construct. The predicted trabecular architecture, and cortical thickness distribution showed good agreement with clinical observations, based on the application of a single leg stance load case during gait. The benefit of using a meso-scale structural approach in comparison to micro or macro-scale continuum approaches to predictive bone modelling was achievement of the symbiotic goals of computational efficiency and structural description of the femur. △ Less

Submitted 20 February, 2012; v1 submitted 6 October, 2011; originally announced October 2011.

Comments: Accepted by Engineering and Computational Mechanics (Proceedings of the ICE)

Constraining the Properties of SNe~Ia Progenitors from Light Curves

Authors: B. Sadler, P. Hoeflich, E. Baron, K. Krisciunas, G. Folatelli, M. Hamuy, M. Khokhlov. M. Phillips, N. Suntzeff, L. Wang

Abstract: We present an analysis of high precision V light curves (LC) for 18 local Type Ia Supernovae, SNe Ia, as obtained with the same telescope and setup at the Las Campanas Observatory (LCO). This homogeneity provides an intrinsic accuracy a few hundreds of a magnitude both with respect to individual LCs and between different objects. Based on the Single Degenerate Scenario, SD, we identify patterns wh… ▽ More We present an analysis of high precision V light curves (LC) for 18 local Type Ia Supernovae, SNe Ia, as obtained with the same telescope and setup at the Las Campanas Observatory (LCO). This homogeneity provides an intrinsic accuracy a few hundreds of a magnitude both with respect to individual LCs and between different objects. Based on the Single Degenerate Scenario, SD, we identify patterns which have been predicted by model calculations as signatures of the progenitor and accretion rate which change the explosion energy and the amount of electron capture, respectively. Using these templates as principle components and the overdetermined system of SN pairs, we reconstruct the properties of progenitors and progenitor systems. All LCO SNe Ia follow the brightness decline relation but 2001ay. After subtraction of the two components, the remaining scatter is reduced to 0.01-0.03m. Type SNe Ia seem to originate from progenitors with Main Sequence masses of 3Mo with the exception of two subluminous SNe Ia with < 2Mo. The component analysis indicates a wide range of accretion rates in the progenitor systems closing the gap to accretion induced collapses (AIC). SN1991t-like objects show differences in $dm15$ but no tracers of our secondary parameters. This may point to a different origin such as DD-Scenario or the Pulsating Delayed Detonations. SN2001ay does not follow the decline relation. It can be understood in the framework of C-rich WDs, and this group may produce an anti-Phillips relation. We suggest that this may be a result of a common envelope phase and mixing during central He burning as in SN1987A. △ Less

Submitted 16 September, 2011; originally announced September 2011.

Comments: 4 pages & 4 figures

Journal ref: in: 'Binary Path to Type Ia Supernova Explosions, Proceedings of the IAU 281, eds. DiStephano & M. Orio, Cambridge University Press (2012)

Status of high temperature superconductor based magnets and the conductors they depend upon

Authors: J. Schwartz, F. Hunte, W. K. Chan, X. F. Gou, X. T. Liu, M. Phillips, Q. V. Le, G. Naderi, M. Turenne, L. Ye

Abstract: This paper reviews the status of high temperature superconductors for high field magnets for future devices such as a high energy LHC or a muon collider. Some of the primary challenges faced for the implementation of systems are discussed. Two conductor technologies, Bi$_2$Sr$_2$CaCu$_2$O$_{8+x}$ and YBa$_2$Cu$_3$O$_{7-δ}$, have emerged as high field conductor options, but their relative advantage… ▽ More This paper reviews the status of high temperature superconductors for high field magnets for future devices such as a high energy LHC or a muon collider. Some of the primary challenges faced for the implementation of systems are discussed. Two conductor technologies, Bi$_2$Sr$_2$CaCu$_2$O$_{8+x}$ and YBa$_2$Cu$_3$O$_{7-δ}$, have emerged as high field conductor options, but their relative advantages and disadvantages for high field magnets are quite different. These are reviewed from an engineering perspective, including coil manufacturing, electromechanical behaviour and quench behaviour. Lastly, the important roles of "system pull" upon conductor and magnet technology development, and of interactions between the materials and magnet communities for accelerating development, are discussed. △ Less

Submitted 8 August, 2011; originally announced August 2011.

Comments: 11 pages, contribution to the EuCARD-AccNet-EuroLumi Workshop: The High-Energy Large Hadron Collider, Malta, 14 -- 16 Oct 2010; CERN Yellow Report CERN-2011-003, pp. 59-69

The Next Linear Collider Klystron Development Program*

Authors: E. Jongewaard, G. Caryotakis, C. Pearson, R. M. Phillips, D. Sprehn, A. Vlieks

Abstract: Klystrons capable of 75 MW output power at 11.4 GHz have been under development at SLAC for the last decade. The work has been part of the program to realize all the components necessary for the construction of the Next Linear Collider (NLC). The effort has produced a family of solenoid-focused 50 MW klystrons, which are currently powering a 0.5 GeV test accelerator at SLAC and several test stan… ▽ More Klystrons capable of 75 MW output power at 11.4 GHz have been under development at SLAC for the last decade. The work has been part of the program to realize all the components necessary for the construction of the Next Linear Collider (NLC). The effort has produced a family of solenoid-focused 50 MW klystrons, which are currently powering a 0.5 GeV test accelerator at SLAC and several test stands, where high power components are evaluated and fundamental research is performed studying rf breakdown and dark current production. Continuing development has resulted in a Periodic Permanent Magnet (PPM) focused 50 MW klystron, tested at SLAC and subsequently contracted for manufacture by industry in England and Japan. A 75 MW version of that PPM klystron was built at SLAC and reached 75 MW, with 2.8 microsecond pulses. Based on this design, a prototype 75 MW klystron, designed for low-cost manufacture, is currently under development at SLAC, and will eventually be procured from industry in modest quantities for advanced NLC tests. Beyond these developments, the design of Multiple Beam Klystrons (MBKs) is under study at SLAC. MBKs offer the possibility of considerably lower modulator costs by producing comparable power to the klystrons now available, at much lower voltages. * This work supported by the Department of Energy under contract DE-AC03-76SF00515 △ Less

Submitted 18 August, 2000; originally announced August 2000.

Comments: 3 pages, 2 figures, Presented at Linac 2000, XX International Linac Conference

Report number: SLAC-PUB-8478

Journal ref: eConfC000821:THA03,2000