Showing 1–50 of 58 results for author: Phillips, J

Mitigation of birefringence in cavity-based quantum networks using frequency-encoded photons

Authors: Chengxi Zhang, Justin Phillips, Inder Monga, Erhan Saglamyurek, Qiming Wu, Hartmut Haeffner

Abstract: Atom-cavity systems offer unique advantages for building large-scale distributed quantum computers by providing strong atom-photon coupling while allowing for high-fidelity local operations of atomic qubits. However, in prevalent schemes where the photonic state is encoded in polarization, cavity birefringence introduces an energy splitting of the cavity eigenmodes and alters the polarization stat… ▽ More Atom-cavity systems offer unique advantages for building large-scale distributed quantum computers by providing strong atom-photon coupling while allowing for high-fidelity local operations of atomic qubits. However, in prevalent schemes where the photonic state is encoded in polarization, cavity birefringence introduces an energy splitting of the cavity eigenmodes and alters the polarization states, thus limiting the fidelity of remote entanglement generation. To address this challenge, we propose a scheme that encodes the photonic qubit in the frequency degree-of-freedom. The scheme relies on resonant coupling of multiple transverse cavity modes to different atomic transitions that are well-separated in frequency. We numerically investigate the temporal properties of the photonic wavepacket, two-photon interference visibility, and atom-atom entanglement fidelity under various cavity polarization-mode splittings and find that our scheme is less affected by cavity birefringence. Finally, we propose practical implementations in two trapped ion systems, using the fine structure splitting in the metastable D state of $\mathrm{^{40}Ca^{+}}$, and the hyperfine splitting in the ground state of $\mathrm{^{225}Ra^{+}}$. Our study presents an alternative approach for cavity-based quantum networks that is less sensitive to birefringent effects, and is applicable to a variety of atomic and solid-state emitter-cavity interfaces. △ Less

Submitted 6 March, 2025; originally announced March 2025.

Comments: 13 pages, 6 figures

Comparing Perturbative and Commutator-Rank-Based Truncation Schemes in Unitary Coupled-Cluster Theory

Authors: Justin T. Phillips, Lauren N. Koulias, Stephen H. Yuwono, A. Eugene DePrince III

Abstract: Unitary coupled cluster (UCC) theory offers a promising Hermitian alternative to conventional coupled cluster (CC) theory, but its practical implementation is hindered by the non-truncating nature of the Baker-Campbell-Hausdorff (BCH) expansion of the similarity-transformed Hamiltonian ($\bar{H}$). To address this challenge, various truncation strategies have been developed to approximate… ▽ More Unitary coupled cluster (UCC) theory offers a promising Hermitian alternative to conventional coupled cluster (CC) theory, but its practical implementation is hindered by the non-truncating nature of the Baker-Campbell-Hausdorff (BCH) expansion of the similarity-transformed Hamiltonian ($\bar{H}$). To address this challenge, various truncation strategies have been developed to approximate $\bar{H}$ in a compact and reliable manner. In this work, we compare the numerical performance of approximate UCC with single and double excitations (UCCSD) methods that employ many-body perturbation theory (MBPT) and commutator rank based truncation schemes. Our results indicate low-order MBPT-based schemes, such as UCC(2) and UCC(3), yield reasonable results near equilibrium, but they become unreliable at stretched geometries. Higher-order MBPT-based schemes do not necessarily improve performance, as the UCCSD(4) and UCCSD(5) amplitude equations sometimes lack solutions. In contrast, commutator-rank-based truncations exhibit greater numerical stability, with the Bernoulli representation of the BCH expansion enabling more rapid convergence to the UCCSD limit compared to the standard BCH formulation. △ Less

Submitted 2 May, 2025; v1 submitted 1 March, 2025; originally announced March 2025.

Self-aligned multilayered nitrogen vacancy diamond nanoparticles for high spatial resolution magnetometry of microelectronic currents

Authors: Yash Gokhale, Brandon S Coventry, Tsani Rogers, Maya Lines, Anna Vena, Jack Phillips, Tianxiang Zhu, Ilhan Bok, Dariana J. Troche, Mitchell Glodowski, Adam Vareberg, Suyash Bhatt, Alireza Ashtiani, Kevin W. Eliceiri, Aviad Hai

Abstract: Nitrogen Vacancy diamond nanoparticles (NVNPs) are increasingly integrated with methods for optical detection of magnetic resonance (ODMR), providing new opportunities in magnetic characterization that span the visualization of magnetic fields in microelectronic circuits, environmental sensing and biology. However, only a small number of studies utilize aggregates of NVNPs for surface-wide magneto… ▽ More Nitrogen Vacancy diamond nanoparticles (NVNPs) are increasingly integrated with methods for optical detection of magnetic resonance (ODMR), providing new opportunities in magnetic characterization that span the visualization of magnetic fields in microelectronic circuits, environmental sensing and biology. However, only a small number of studies utilize aggregates of NVNPs for surface-wide magnetometry being that spin orientations in aggregate NVNPs are inherently misaligned, precluding their use for proper magnetic field detection compared with expensive monocrystalline diamonds. A postprocessing method for layering NVNPs with aligned NV center orientations can potentially facilitate superior NV magnetometry by allowing sensitive detection combined with simplified probe preparation. We present a novel technology for creating densely stacked monolayers of NVNP with inherent interlayer alignment for sensitive measurement of local magnetic field perturbations in microelectronic traces. We establish spatial characteristics of deposited aggregates and demonstrate their ability to capture magnetic dipoles from conducting microwires via ODMR. Our approach forms a novel accessible protocol that can be used for broad applications in micromagnetometry. △ Less

Submitted 8 February, 2025; v1 submitted 20 January, 2025; originally announced January 2025.

Femtosecond temperature measurements of laser-shocked copper deduced from the intensity of the x-ray thermal diffuse scattering

Authors: J. S. Wark, D. J. Peake, T. Stevens, P. G. Heighway, Y. Ping, P. Sterne, B. Albertazzi, S. J. Ali, L. Antonelli, M. R. Armstrong, C. Baehtz, O. B. Ball, S. Banerjee, A. B. Belonoshko, C. A. Bolme, V. Bouffetier, R. Briggs, K. Buakor, T. Butcher, S. Di Dio Cafiso, V. Cerantola, J. Chantel, A. Di Cicco, A. L. Coleman, J. Collier , et al. (100 additional authors not shown)

Abstract: We present 50-fs, single-shot measurements of the x-ray thermal diffuse scattering (TDS) from copper foils that have been shocked via nanosecond laser-ablation up to pressures above 135~GPa. We hence deduce the x-ray Debye-Waller (DW) factor, providing a temperature measurement. The targets were laser-shocked with the DiPOLE 100-X laser at the High Energy Density (HED) endstation of the European X… ▽ More We present 50-fs, single-shot measurements of the x-ray thermal diffuse scattering (TDS) from copper foils that have been shocked via nanosecond laser-ablation up to pressures above 135~GPa. We hence deduce the x-ray Debye-Waller (DW) factor, providing a temperature measurement. The targets were laser-shocked with the DiPOLE 100-X laser at the High Energy Density (HED) endstation of the European X-ray Free-Electron Laser (EuXFEL). Single x-ray pulses, with a photon energy of 18 keV, were scattered from the samples and recorded on Varex detectors. Despite the targets being highly textured (as evinced by large variations in the elastic scattering), and with such texture changing upon compression, the absolute intensity of the azimuthally averaged inelastic TDS between the Bragg peaks is largely insensitive to these changes, and, allowing for both Compton scattering and the low-level scattering from a sacrificial ablator layer, provides a reliable measurement of $T/Θ_D^2$, where $Θ_D$ is the Debye temperature. We compare our results with the predictions of the SESAME 3336 and LEOS 290 equations of state for copper, and find good agreement within experimental errors. We thus demonstrate that single-shot temperature measurements of dynamically compressed materials can be made via thermal diffuse scattering of XFEL radation. △ Less

Submitted 6 January, 2025; originally announced January 2025.

Comments: 17 pages, 9 figures in main article; 10 pages, 5 figures in supplementary material

Non-unique water and contrast agent solutions in dual-energy CT

Authors: JP Phillips, Emil Y. Sidky, Fatma Terzioglu, Ingrid S. Reiser, Guillaume Bal, Xiaochuan Pan

Abstract: The goal of this work is to study occurrences of non-unique solutions in dual-energy CT (DECT) for objects containing water and a contrast agent. Previous studies of the Jacobian of nonlinear systems identified that a vanishing Jacobian determinant indicates the existence of multiple solutions to the system. Vanishing Jacobian determinants are identified for DECT setups by simulating intensity dat… ▽ More The goal of this work is to study occurrences of non-unique solutions in dual-energy CT (DECT) for objects containing water and a contrast agent. Previous studies of the Jacobian of nonlinear systems identified that a vanishing Jacobian determinant indicates the existence of multiple solutions to the system. Vanishing Jacobian determinants are identified for DECT setups by simulating intensity data for practical thickness ranges of water and contrast agent. Once existence is identified, non-unique solutions are found by simulating scan data and finding intensity contours with that intersect multiple times. With this process non-unique solutions are found for DECT setups scanning iodine and gadolinium, including setups using tube potentials in practical ranges. Non-unique solutions demonstrate a large range of differences and can result in significant discrepancies between recovered and true material mapping. △ Less

Submitted 19 November, 2024; originally announced November 2024.

Comments: Proceedings paper for accepted contribution to the 8th International Conference on Image Formation in X-Ray Computed Tomography

Half-kilowatt high energy third harmonic conversion to 50 J @ 10 Hz at 343 nm

Authors: Jan Pilar, Martin Divoky, Jonathan Phillips, Martin Hanus, Petr Navratil, Ondrej Denk, Patricie Severova, Tomas Paliesek, Danielle Clarke, Martin Smrz, Thomas Butcher, Chris Edwards, Tomas Mocek

Abstract: We report on frequency tripling of high energy, high repetition rate ns pulses from a cryogenically gas cooled multi-slab Yb:YAG laser system Bivoj/DiPOLE, using a type-I phase matched LBO crystal for second harmonic generation and type-II phase matched LBO crystal for sum frequency generation. We achieved conversion to 343 nm with stable energy of 50 J at repetition rate of 10 Hz and conversion e… ▽ More We report on frequency tripling of high energy, high repetition rate ns pulses from a cryogenically gas cooled multi-slab Yb:YAG laser system Bivoj/DiPOLE, using a type-I phase matched LBO crystal for second harmonic generation and type-II phase matched LBO crystal for sum frequency generation. We achieved conversion to 343 nm with stable energy of 50 J at repetition rate of 10 Hz and conversion efficiency of 53%. △ Less

Submitted 20 September, 2024; v1 submitted 16 July, 2024; originally announced July 2024.

All-optical method to directly measure the pressure-volume-temperature equation of state of fluids in the diamond anvil cell

Authors: J. E. Proctor, C. E. A. Robertson, L. J. Jones, J. Phillips, K. Watson, Y. Dabburi, B. Moss

Abstract: We have developed a new all-optical method to directly measure the pressure-volume-temperature (PVT) equation of state (EOS) of fluids and transparent solids in the diamond anvil high pressure cell by measuring the volume of the sample chamber. Our method combines confocal microscopy and white light interference with a new analysis method which exploits the mutual dependence of sample density and… ▽ More We have developed a new all-optical method to directly measure the pressure-volume-temperature (PVT) equation of state (EOS) of fluids and transparent solids in the diamond anvil high pressure cell by measuring the volume of the sample chamber. Our method combines confocal microscopy and white light interference with a new analysis method which exploits the mutual dependence of sample density and refractive index: Experimentally, the refractive index determines the measured sample chamber thickness (and therefore the measured sample volume/density), yet the sample density is by far the dominant factor in determining the variation in refractive index with pressure. Our analysis method allows us to obtain a set of values for the density and refractive index which are mutually consistent, and agree with the experimental data within error. We have conducted proof-of-concept experiments on a variety of samples (H$_{2}$O, CH$_{4}$, C$_{2}$H$_{6}$, C$_{3}$H$_{8}$, KCl and NaCl) at ambient temperature, and at high temperatures up to just above 500 K. Our proof-of-concept data demonstrate that our method is able to reproduce known fluid and solid EOS within error. Furthermore, we demonstrate that our method allows us to directly and routinely measure the PVT EOS of simple fluids at GPa pressures up to, at least, 514 K (the highest temperature reached in our study). A reasonable estimation of the known sources of error in our volume determinations indicates that the error is currently $\pm$ 2.7% at high temperature, and that it is feasible to reduce it to ca. $\pm$ 1% in future work. △ Less

Submitted 15 August, 2024; v1 submitted 10 July, 2024; originally announced July 2024.

Comments: Accepted for publication in Physics of Fluids

A directional total variation minimization algorithm for isotropic resolution in digital breast tomosynthesis

Authors: Emil Y. Sidky, Xiangyi Wu, Xiaoyu Duan, Hailing Huang, Wei Zhao, Leo Y. Zhang, John Paul Phillips, Zheng Zhang, Buxin Chen, Dan Xia, Ingrid S. Reiser, Xiaochuan Pan

Abstract: An optimization-based image reconstruction algorithm is developed for contrast enhanced digital breast tomosynthesis (DBT) using dual-energy scanning. The algorithm minimizes directional total variation (TV) with a data discrepancy and non-negativity constraints. Iodinated contrast agent (ICA) imaging is performed by reconstructing images from dual-energy DBT data followed by weighted subtraction.… ▽ More An optimization-based image reconstruction algorithm is developed for contrast enhanced digital breast tomosynthesis (DBT) using dual-energy scanning. The algorithm minimizes directional total variation (TV) with a data discrepancy and non-negativity constraints. Iodinated contrast agent (ICA) imaging is performed by reconstructing images from dual-energy DBT data followed by weighted subtraction. Physical DBT data is acquired with a Siemens Mammomat scanner of a structured breast phantom with ICA inserts. Results are shown for both directional TV minimization and filtered back-projection for reference. It is seen that directional TV is able to substantially reduce depth blur for the ICA objects. △ Less

Submitted 11 June, 2024; originally announced June 2024.

Comments: Proceedings paper for accepted contribution to the 8th International Conference on Image Formation in X-Ray Computed Tomography (https://www.ct-meeting.org)

Workshop on a future muon program at FNAL

Authors: S. Corrodi, Y. Oksuzian, A. Edmonds, J. Miller, H. N. Tran, R. Bonventre, D. N. Brown, F. Meot, V. Singh, Y. Kolomensky, S. Tripathy, L. Borrel, M. Bub, B. Echenard, D. G. Hitlin, H. Jafree, S. Middleton, R. Plestid, F. C. Porter, R. Y. Zhu, L. Bottura, E. Pinsard, A. M. Teixeira, C. Carelli, D. Ambrose , et al. (68 additional authors not shown)

Abstract: The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e… ▽ More The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e.g., muon collider). Topics included high-power targetry, status of R&D for Mu2e-II, development of compressor rings, FFA and concepts for muon experiments (conversion, decays, muonium and other opportunities) at AMF. This document summarizes the workshop discussions with a focus on future R&D tasks needed to realize these concepts. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Comments: 68 pages, 36 figures

Report number: FERMILAB-CONF-23-464-PPD, CALT-TH-2023-036

Optimizing dual-energy CT technique for iodine-based contrast-to-noise ratio

Authors: Fatma Terzioglu, Emil Y. Sidky, Jp Phillips, Ingrid Reiser, Guillaume Bal, Xiaochuan Pan

Abstract: Purpose: This study proposes a systematic method for determining the optimal x-ray tube settings/energy windows and fluence for minimal noise and maximum CNR in material density images obtained from DECT scans by fixing the subject size and the total radiation dose. Methods: The noise propagation in the process of sinogram and image reconstruction from DECT measurements is analyzed. Analytic estim… ▽ More Purpose: This study proposes a systematic method for determining the optimal x-ray tube settings/energy windows and fluence for minimal noise and maximum CNR in material density images obtained from DECT scans by fixing the subject size and the total radiation dose. Methods: The noise propagation in the process of sinogram and image reconstruction from DECT measurements is analyzed. Analytic estimates for the sinogram and monochromatic image pixel variances and the CNR as functions of tube potentials, fluence, and virtual monochromatic image (VMI) energy are derived, and then used in a phantom experiment as an objective function for optimizing the tube settings to minimize the image noise and maximize the CNR. Results: A non-trivial example that shows the existence of singular solutions to the inversion of sinograms-to-DECT measurements map was presented. Additionally, the optimal VMI energy for maximal CNR was determined. The optimal energy VMI was found to be the least noisy monochromatic image synthesized from the iodine and water density images, and it was shown that using more general weights in combining the two images linearly does not improve image quality. When the x-ray beam filter material was fixed at 2mm of Aluminum and the photon fluence for low and high kV scans were considered equal, the tube potential pair of 60/120 kV led to the maximal CNR in the VMI formed at energy 55 KeV. Conclusions: Optimizing DECT scan parameters to maximize the CNR can be done in a systematic way. Also choosing the parameters that maximize the Jacobian determinant over the sinogram domain would lead to more stable reconstructions due to the reduced amplification of the measurement noise. Since the values of the Jacobian determinant depend strongly on the imaging task, careful consideration of all of the relevant factors is needed when implementing the proposed framework. △ Less

Submitted 28 July, 2023; originally announced August 2023.

Simulating shallow morphodynamic flows on evolving topographies

Authors: Jake Langham, Mark J. Woodhouse, Andrew J. Hogg, Luke T. Jenkins, Jeremy C. Phillips

Abstract: We derive general depth-integrated model equations for overland flows featuring the evolution of suspended sediment that may be eroded from or deposited onto the underlying topography ('morphodynamics'). The resulting equations include geometric corrections that account for large variations in slope angle. These are often non-negligible for Earth-surface flows and may consequently be important for… ▽ More We derive general depth-integrated model equations for overland flows featuring the evolution of suspended sediment that may be eroded from or deposited onto the underlying topography ('morphodynamics'). The resulting equations include geometric corrections that account for large variations in slope angle. These are often non-negligible for Earth-surface flows and may consequently be important for simulating natural hazards. We also show how to adapt existing finite volume schemes for the classical shallow water equations, to simulate our new equations in a way that preserves uniform steady states and exactly conserves the combined mass of the flow and bed. Finally, to demonstrate our formulation, we present computations using simple example model closures, fed by point flux sources. On initially constant slopes, flows exhibit different behaviours depending on the grade. Shallow slopes lead to weakly morphodynamic spreading flows that agree well with analytical similarity solutions. On more severe slopes, rapid erosion occurs, leading to self-channelising flows and ultimately a 'super-erosive' state, in which sediment entrainment and gravitational acceleration perpetually reinforce each other. △ Less

Submitted 28 June, 2023; originally announced June 2023.

Comments: 28 pages, 8 figures, 1 table

Letter of Intent: Muonium R&D/Physics Program at the MTA

Authors: C. Gatto, C. Izzo, C. J. Johnstone, D. M. Kaplan, K. R. Lynch, D. C. Mancini, A. Mazzacane, B. McMorran, J. P. Miller, J. D. Phillips, T. J. Phillips, R. D. Reasenberg, T. J. Roberts, J. Terry

Abstract: With the planned turn-on of the PIP-II 800 MeV superconducting proton linac, Fermilab will potentially become the world's best laboratory at which to carry out fundamental muon measurements, sensitive searches for symmetry violation, and precision tests of theory. In preparation, we propose to develop the techniques that will be needed. An R&D and physics program is proposed at the Fermilab MeV Te… ▽ More With the planned turn-on of the PIP-II 800 MeV superconducting proton linac, Fermilab will potentially become the world's best laboratory at which to carry out fundamental muon measurements, sensitive searches for symmetry violation, and precision tests of theory. In preparation, we propose to develop the techniques that will be needed. An R&D and physics program is proposed at the Fermilab MeV Test Area to use the existing 400 MeV Linac to demonstrate the efficient production of a slow muonium beam using $μ^+$ stopped in a ~100-$μ$m-thick layer of superfluid helium, and to use that beam to measure muonium gravity. △ Less

Submitted 9 December, 2022; originally announced December 2022.

Comments: 3 pages, submitted to Fermilab

Report number: IIT-CAPP-22-1

Detection of the third innermost radiation belt on LEO CORONAS-Photon satellite around 2009 solar minimum

Authors: Oleksiy V. Dudnik, Janusz Sylwester, Miroslaw Kowalinski, Piotr Podgorski, Kenneth J. H. Phillips

Abstract: We analyze variations of high-energy charged particle populations filling various magnetospheric regions under, inside, and outside of the Van Allen inner and outer electron radiation belts in May 2009. The study is based on the experimental data obtained from the STEP-F and the SphinX instruments placed close to each other aboard the low-Earth circular orbit CORONAS-Photon satellite. Data analysi… ▽ More We analyze variations of high-energy charged particle populations filling various magnetospheric regions under, inside, and outside of the Van Allen inner and outer electron radiation belts in May 2009. The study is based on the experimental data obtained from the STEP-F and the SphinX instruments placed close to each other aboard the low-Earth circular orbit CORONAS-Photon satellite. Data analysis of particle fluencies collected from the highly sensitive STEP-F device indicates the presence of a persistent electron belt at L = 1.6, i.e., beneath the well-known Van Allen electron inner radiation belt of the Earth's magnetosphere. The electron energy spectrum in this 'new' belt is much steeper than that of the inner belt so that the electrons with energies Ee > 400 keV were almost not recorded on L = 1.6 outside the South Atlantic Anomaly (SAA). We introduce the concept of effective lowest threshold energies for X-ray detectors used in the solar soft X-ray spectrophotometer SphinX and define their values for two regions: the SAA and the Van Allen outer belt. Different values of lowest threshold energies are directly associated with different slopes of particle energy spectra. Cross-analyses of data obtained from the STEP-F and SphinX instruments initially built for various purposes made it possible to detect the highly anisotropic character of the spatial electron distribution in radiation belts in both Southern and northern hemispheres. We detected also the presence of low-energy electrons at all latitudes during the main phase of a weak geomagnetic storm. △ Less

Submitted 11 July, 2022; originally announced August 2022.

Comments: Advances in Space Research, in press, 17 pages, 9 figures, 1 table

Evolution of Transthyretin

Authors: J. C. Phillips

Abstract: Evolution of the amino acid sequences of transthyretin (TTR) can provide additional information about its dynamics that both complements and extends the already extensive static structural data. Protein dynamics is largely driven by interactions between the protein itself and the thin water film that covers it. Here those interactions are connected to profiles of water waves connecting domain pivo… ▽ More Evolution of the amino acid sequences of transthyretin (TTR) can provide additional information about its dynamics that both complements and extends the already extensive static structural data. Protein dynamics is largely driven by interactions between the protein itself and the thin water film that covers it. Here those interactions are connected to profiles of water waves connecting domain pivots (hydrophobic extrema), as well as a broad hydrophilic central hinge region that has evolved to provide human TTR with greater flexibility and stability. This central region has a density of single mutations related to amyloid polyneuropathy that is three times higher than other regions. △ Less

Submitted 21 December, 2021; originally announced December 2021.

Comments: 9 pages 3 figures 1 table

Kinesin Motors and the Evolution of Intelligence

Authors: J. C. Phillips

Abstract: Intelligence is often discussed in terms of neural networks in the cerebral cortex, whose evolution has presumably been influenced by Darwinian selection. Here we present molecular evidence that one of the many kinesin motors, Kif14, has evolved to exhibit special features in its amino acid sequence that could have evolved to improve neural networks. The improvement is quantified by comparison of… ▽ More Intelligence is often discussed in terms of neural networks in the cerebral cortex, whose evolution has presumably been influenced by Darwinian selection. Here we present molecular evidence that one of the many kinesin motors, Kif14, has evolved to exhibit special features in its amino acid sequence that could have evolved to improve neural networks. The improvement is quantified by comparison of Kif14 sequences for 12 species. The special feature is level sets of hydrophobic extrema in water wave profiles based on several hydropathic scales. The most effective scale is a new one based on fractals, indicative of approach of globular curvatures to self-organized criticality. △ Less

Submitted 4 January, 2021; originally announced January 2021.

Comments: 7 pages, 1 figure, 1 table

Self-Organized Networks: Darwinian Evolution of Myosin-1

Authors: J. C. Phillips

Abstract: Cytoskeletons are self-organized networks based on polymerized proteins: actin, tubulin, and driven by motor proteins, such as myosin, kinesin and dynein. Their positive Darwinian evolution enables them to approach optimized functionality (self-organized criticality). The principal features of the eukaryotic evolution of the cytoskeleton motor protein myosin-1 parallel those of actin and tubulin,… ▽ More Cytoskeletons are self-organized networks based on polymerized proteins: actin, tubulin, and driven by motor proteins, such as myosin, kinesin and dynein. Their positive Darwinian evolution enables them to approach optimized functionality (self-organized criticality). The principal features of the eukaryotic evolution of the cytoskeleton motor protein myosin-1 parallel those of actin and tubulin, but also show striking differences connected to its dynamical function. Optimized (long) hydropathic waves characterize the molecular level Darwinian evolution towards optimized functionality (self-organized criticality). The N-terminal and central domains of myosin-1 have evolved in eukaryotes at different rates, with the central domain hydropathic extrema being optimally active in humans. A test shows that hydropathic scaling can yield accuracies of better than 1% near optimized functionality. Evolution towards synchronized level extrema is connected to a special function of Mys-1 in humans involving Golgi complexes. △ Less

Submitted 28 October, 2020; originally announced November 2020.

Comments: 20 pages, 9 figures

A signal detection model for quantifying over-regularization in non-linear image reconstruction

Authors: Emil Y. Sidky, John Paul Phillips, Weimin Zhou, Greg Ongie, Juan Cruz-Bastida, Ingrid S. Reiser, Mark A. Anastasio, Xiaochuan Pan

Abstract: Purpose: Many useful image quality metrics for evaluating linear image reconstruction techniques do not apply to or are difficult to interpret for non-linear image reconstruction. The vast majority of metrics employed for evaluating non-linear image reconstruction are based on some form of global image fidelity, such as image root mean square error (RMSE). Use of such metrics can lead to over-regu… ▽ More Purpose: Many useful image quality metrics for evaluating linear image reconstruction techniques do not apply to or are difficult to interpret for non-linear image reconstruction. The vast majority of metrics employed for evaluating non-linear image reconstruction are based on some form of global image fidelity, such as image root mean square error (RMSE). Use of such metrics can lead to over-regularization in the sense that they can favor removal of subtle details in the image. To address this shortcoming, we develop an image quality metric based on signal detection that serves as a surrogate to the qualitative loss of fine image details. Methods: The metric is demonstrated in the context of a breast CT simulation, where different equal-dose configurations are considered. The configurations differ in the number of projections acquired. Image reconstruction is performed with a non-linear algorithm based on total variation constrained least-squares (TV-LSQ). The images are evaluated visually, with image RMSE, and with the proposed signal-detection based metric. The latter uses a small signal, and computes detectability in the sinogram and in the reconstructed image. Loss of signal detectability through the image reconstruction process is taken as a quantitative measure of loss of fine details in the image. Results: Loss of signal detectability is seen to correlate well with the blocky or patchy appearance due to over-regularization with TV-LSQ, and this trend runs counter to the image RMSE metric, which tends to favor the over-regularized images. Conclusions: The proposed signal detection based metric provides an image quality assessment that is complimentary to that of image RMSE. Using the two metrics in concert may yield a useful prescription for determining CT algorithm and configuration parameters when non-linear image reconstruction is used. △ Less

Submitted 8 December, 2020; v1 submitted 7 October, 2020; originally announced October 2020.

Comments: 25 pages, 10 figures. Submitted to Medical Physics

Linear stability of shallow morphodynamic flows

Authors: Jake Langham, Mark J. Woodhouse, Andrew J. Hogg, Jeremy C. Phillips

Abstract: It is increasingly common for models of shallow-layer overland flows to include equations for the evolution of the underlying bed (morphodynamics) and the motion of an associated sedimentary phase. We investigate the linear stability properties of these systems in considerable generality. Naive formulations of the morphodynamics, featuring exchange of sediment between a well-mixed suspended load a… ▽ More It is increasingly common for models of shallow-layer overland flows to include equations for the evolution of the underlying bed (morphodynamics) and the motion of an associated sedimentary phase. We investigate the linear stability properties of these systems in considerable generality. Naive formulations of the morphodynamics, featuring exchange of sediment between a well-mixed suspended load and the bed, lead to mathematically ill-posed governing equations. This is traced to a singularity in the linearised system at Froude number $Fr = 1$ that causes unbounded unstable growth of short-wavelength disturbances. The inclusion of neglected physical processes can restore well posedness. Turbulent momentum diffusion (eddy viscosity) and a suitably parametrised bed load sediment transport are shown separately to be sufficient in this regard. However, we demonstrate that such models typically inherit an associated instability that is absent from non-morphodynamic settings. Implications of our analyses are considered for simple generic closures, including a drag law that switches between fluid and granular behaviour, depending on the sediment concentration. Steady morphodynamic flows bifurcate into two states: dilute flows, which are stable at low $Fr$, and concentrated flows which are always unstable to disturbances in concentration. By computing the growth rates of linear modes across a wide region of parameter space, we examine in detail the effects of specific model parameters including the choices of sediment erodibility, eddy viscosity and bed load flux. These analyses may be used to inform the ongoing development of operational models in engineering and geosciences. △ Less

Submitted 29 March, 2021; v1 submitted 31 July, 2020; originally announced July 2020.

Comments: 38 pages, 13 figures

Journal ref: J. Fluid Mech. 916 (2021) A31

Demonstration of Muon-Beam Transverse Phase-Space Compression

Authors: A. Antognini, N. J. Ayres, I. Belosevic, V. Bondar, A. Eggenberger, M. Hildebrandt, R. Iwai, D. M. Kaplan, K. S. Khaw, K. Kirch, A. Knecht, A. Papa, C. Petitjean, T. J. Phillips, F. M. Piegsa, N. Ritjoho, A. Stoykov, D. Taqqu, G. Wichmann

Abstract: We demonstrate efficient transverse compression of a 12.5 MeV/c muon beam stopped in a helium gas target featuring a vertical density gradient and crossed electric and magnetic fields. The muon stop distribution extending vertically over 14 mm was reduced to a 0.25 mm size (RMS) within 3.5 $μ$s. The simulation including cross sections for low-energy $μ^+$-$\text{He}$ elastic and charge exchange (… ▽ More We demonstrate efficient transverse compression of a 12.5 MeV/c muon beam stopped in a helium gas target featuring a vertical density gradient and crossed electric and magnetic fields. The muon stop distribution extending vertically over 14 mm was reduced to a 0.25 mm size (RMS) within 3.5 $μ$s. The simulation including cross sections for low-energy $μ^+$-$\text{He}$ elastic and charge exchange ($μ^+\leftrightarrow $ muonium) collisions describes the measurements well. By combining the transverse compression stage with a previously demonstrated longitudinal compression stage, we can improve the phase space density of a $μ^+ $ beam by a factor of $ 10^{10} $ with $ 10^{-3} $ efficiency. △ Less

Submitted 28 September, 2020; v1 submitted 26 March, 2020; originally announced March 2020.

Comments: 6 pages, 7 figures; accepted for publication in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 125, 164802 (2020)

Low temperature growth and optical properties of α-Ga2O3 deposited on sapphire by plasma enhanced atomic layer deposition

Authors: J. W. Roberts, P. R. Chalker, B. Ding, R. A. Oliver, J. T. Gibbon, L. A. H. Jones, V. R. Dhanak, L. J. Phillips, J. D. Major, F. C-P. Massabuau

Abstract: Plasma enhanced atomic layer deposition was used to deposit thin films of Ga2O3 on to c-plane sapphire substrates using triethylgallium and O2 plasma. The influence of substrate temperature and plasma processing parameters on the resultant crystallinity and optical properties of the Ga2O3 films were investigated. The deposition temperature was found to have a significant effect on the film crystal… ▽ More Plasma enhanced atomic layer deposition was used to deposit thin films of Ga2O3 on to c-plane sapphire substrates using triethylgallium and O2 plasma. The influence of substrate temperature and plasma processing parameters on the resultant crystallinity and optical properties of the Ga2O3 films were investigated. The deposition temperature was found to have a significant effect on the film crystallinity. At temperatures below 200°C amorphous Ga2O3 films were deposited. Between 250°C and 350°C the films became predominantly α-Ga2O3. Above 350°C the deposited films showed a mixture of α-Ga2O3 and ε-Ga2O3 phases. Plasma power and O2 flow rate were observed to have less influence over the resultant phases present in the films. However, both parameters could be tuned to alter the strain of the film. Ultraviolet transmittance measurements on the Ga2O3 films showed that the bandgaps ranges from 5.0 eV to 5.2 eV with the largest bandgap of 5.2 eV occurring for the α-Ga2O3 phase deposited at 250°C. △ Less

Submitted 19 August, 2019; originally announced August 2019.

Comments: 11 pages, 7 figures, 1 table

Microscopic biophysical model of self-organization in tissue due to feedback between cell- and macroscopic-scale forces

Authors: J. P. Hague, P. W. Mieczkowski, C. O'Rourke, A. J. Loughlin, J. B. Phillips

Abstract: We develop a microscopic biophysical model for self-organization and reshaping of artificial tissue, that is co-driven by microscopic active forces between cells and extracellular matrix (ECM), and macroscopic forces that develop within the tissue, finding close agreement with experiment. Microscopic active forces are stimulated by $μ$m scale interactions between cells and the ECM within which the… ▽ More We develop a microscopic biophysical model for self-organization and reshaping of artificial tissue, that is co-driven by microscopic active forces between cells and extracellular matrix (ECM), and macroscopic forces that develop within the tissue, finding close agreement with experiment. Microscopic active forces are stimulated by $μ$m scale interactions between cells and the ECM within which they exist, and when large numbers of cells act together these forces drive, and are affected by, macroscopic-scale self-organization and reshaping of tissues in a feedback loop. To understand this loop, there is a need to: (1) construct microscopic biophysical models that can simulate these processes for the very large number of cells found in tissues; (2) validate and calibrate those models against experimental data; and (3) understand the active feedback between cells and the extracellular matrix, and its relationship to macroscopic self-organization and reshaping of tissue. Our microscopic biophysical model consists of a contractile network representing the ECM, that interacts with a large number of cells via dipole forces, to describe macroscopic self-organization and reshaping of tissue. We solve the model using simulated annealing, finding close agreement with experiments on artificial neural tissue. We discuss calibration of model parameters. We conclude that feedback between microscopic cell-ECM dipole interactions and tissue-scale forces, is a key factor in driving macroscopic self-organization and reshaping of tissue. We discuss application of the biophysical model to simulation and rational design of artificial tissues. △ Less

Submitted 17 November, 2020; v1 submitted 7 February, 2019; originally announced February 2019.

Journal ref: Phys. Rev. Research 2, 043217 (2020)

muCool: A novel low-energy muon beam for future precision experiments

Authors: I. Belosevic, A. Antognini, Y. Bao, A. Eggenberger, M. Hildebrandt, R. Iwai, D. M. Kaplan, K. S. Khaw, K. Kirch, A. Knecht, A. Papa, C. Petitjean, T. J. Phillips, F. M. Piegsa, N. Ritjoho, A. Stoykov, D. Taqqu, G. Wichmann

Abstract: Experiments with muons ($μ^{+}$) and muonium atoms ($μ^{+}e^{-}$) offer several promising possibilities for testing fundamental symmetries. Examples of such experiments include search for muon electric dipole moment, measurement of muon $g-2$ and experiments with muonium from laser spectroscopy to gravity experiments. These experiments require high quality muon beams with small transverse size and… ▽ More Experiments with muons ($μ^{+}$) and muonium atoms ($μ^{+}e^{-}$) offer several promising possibilities for testing fundamental symmetries. Examples of such experiments include search for muon electric dipole moment, measurement of muon $g-2$ and experiments with muonium from laser spectroscopy to gravity experiments. These experiments require high quality muon beams with small transverse size and high intensity at low energy. At the Paul Scherrer Institute, Switzerland, we are developing a novel device that reduces the phase space of a standard $μ^{+}$ beam by a factor of $10^{10}$ with $10^{-3}$ efficiency. The phase space compression is achieved by stopping a standard $μ^{+}$ beam in a cryogenic helium gas. The stopped $μ^{+}$ are manipulated into a small spot with complex electric and magnetic fields in combination with gas density gradients. From here, the muons are extracted into the vacuum and into a field-free region. Various aspects of this compression scheme have been demonstrated. In this article the current status will be reported. △ Less

Submitted 15 January, 2019; originally announced January 2019.

Comments: 8 pages, 5 figures, TCP 2018 conference proceedings

Journal ref: Hyperfine Interact (2019) 240: 41

muCool: A next step towards efficient muon beam compression

Authors: A. Antognini, Y. Bao, I. Belosevic, A. Eggenberger, M. Hildebrandt, R. Iwai, D. M. Kaplan, K. S. Khaw, K. Kirch, A. Knecht, A. Papa, C. Petitjean, T. J. Phillips, F. M. Piegsa, N. Ritjoho, A. Stoykov, D. Taqqu, G. Wichmann

Abstract: A novel device to compress the phase space of a muon beam by a factor of $10^{10}$ with a $10^{-3}$ efficiency is under development. A surface muon beam is stopped in a helium gas target consisting of several compression stages, wherein strong electric and magnetic fields are applied. The spatial extent of the stopped muon swarm is decreased by means of these fields until muons with eV energy are… ▽ More A novel device to compress the phase space of a muon beam by a factor of $10^{10}$ with a $10^{-3}$ efficiency is under development. A surface muon beam is stopped in a helium gas target consisting of several compression stages, wherein strong electric and magnetic fields are applied. The spatial extent of the stopped muon swarm is decreased by means of these fields until muons with eV energy are extracted into vacuum through a small orifice. It was measured that a 20 cm long muon stop distribution can be compressed in longitudinal direction to sub-mm extent within 2 ${\rm μs}$. Additionally, a drift perpendicular to the magnetic field of the compressed low-energy muon swarm was successfully demonstrated, paving the way towards the extraction from the gas and re-acceleration of the muons. △ Less

Submitted 20 November, 2018; originally announced November 2018.

Comments: 8 pages, 11 figures

Journal ref: Eur. Phys. J. C (2019) 79: 430

Studying Antimatter Gravity with Muonium

Authors: MAGE Collaboration, Aldo Antognini, Daniel M. Kaplan, Klaus Kirch, Andreas Knecht, Derrick C. Mancini, James D. Phillips, Thomas J. Phillips, Robert D. Reasenberg, Thomas J. Roberts, Anna Soter

Abstract: The gravitational acceleration of antimatter, gbar, has yet to be directly measured; an unexpected outcome of its measurement could change our understanding of gravity, the universe, and the possibility of a fifth force. Three avenues are apparent for such a measurement: antihydrogen, positronium, and muonium, the last requiring a precision atom interferometer and novel muonium beam under developm… ▽ More The gravitational acceleration of antimatter, gbar, has yet to be directly measured; an unexpected outcome of its measurement could change our understanding of gravity, the universe, and the possibility of a fifth force. Three avenues are apparent for such a measurement: antihydrogen, positronium, and muonium, the last requiring a precision atom interferometer and novel muonium beam under development. The interferometer and its few-picometer alignment and calibration systems appear feasible. With 100 nm grating pitch, measurements of gbar to 10%, 1%, or better can be envisioned. These could constitute the first gravitational measurements of leptonic matter, of 2nd-generation matter, and possibly, of antimatter. △ Less

Submitted 6 February, 2018; v1 submitted 31 January, 2018; originally announced February 2018.

Comments: 14 pages, 8 figures, submitted to Atoms

Report number: IIT-CAPP-17-5

Journal ref: Atoms 2018, 6(2), 17

Improved performance of semiconductor laser tracking frequency gauge

Authors: D. M. Kaplan, T. J. Roberts, J. D. Phillips, R. D. Reasenberg

Abstract: We describe new results from the semiconductor-laser tracking frequency gauge, an instrument that can perform sub-picometer distance measurements and has applications in gravity research and in space-based astronomical instruments proposed for the study of light from extrasolar planets. Compared with previous results, we have improved incremental distance accuracy by a factor of two, to 0.9 pm in… ▽ More We describe new results from the semiconductor-laser tracking frequency gauge, an instrument that can perform sub-picometer distance measurements and has applications in gravity research and in space-based astronomical instruments proposed for the study of light from extrasolar planets. Compared with previous results, we have improved incremental distance accuracy by a factor of two, to 0.9 pm in 80 s averaging time, and absolute distance accuracy by a factor of 20, to 0.17 $μ$m in 1000 s. After an interruption of operation of a tracking frequency gauge used to control a distance, it is now possible, using a nonresonant measurement interferometer, to restore the distance to picometer accuracy by combining absolute and incremental distance measurements. △ Less

Submitted 12 March, 2018; v1 submitted 10 December, 2017; originally announced December 2017.

Comments: 8 pages, 4 figures. To appear in JINST. (This version with new figures 3 and 4 with improved graphic quality and performance.)

Report number: IIT-CAPP-17-4

Journal ref: JINST 13 (2018) P03008

Evaluation of Diffusion Weighted Imaging in the Context of Multi-Parametric MRI of the Prostate in the assessment of suspected low volume prostatic carcinoma

Authors: Ioannis Papadopoulos, Jonathan Phillips, Rhodri Evans, Neil Fenn, Sophie Schermer

Abstract: Data from a multi-parametric MRI study of patients with possible early-stage prostate cancer was assessed with a view to creating an efficient clinical protocol. Based on a correlation analysis suggesting that diffusion-weighted imaging (DWI) scores are more strongly correlated with overall PIRADS scores than other modalities such as dynamic contrast enhanced imaging or spectroscopy, we investigat… ▽ More Data from a multi-parametric MRI study of patients with possible early-stage prostate cancer was assessed with a view to creating an efficient clinical protocol. Based on a correlation analysis suggesting that diffusion-weighted imaging (DWI) scores are more strongly correlated with overall PIRADS scores than other modalities such as dynamic contrast enhanced imaging or spectroscopy, we investigate the combination of T2-weighted imaging (T2w) and DWI as a potential diagnostic tool for prostate cancer detection, staging and guided biopsies. Quantification of the noise floor in the DWI images and careful fitting of the data suggests that the mono-exponential model provides a very good fit to the data and there is no evidence of non-Gaussian diffusion for $b$-values up to 1000 s/mm$^2$. This precludes the use of kurtosis or other non-Gaussian measures as a biomarker for prostate cancer in our case. However, the ADC scores for healthy and probably malignant regions are significantly lower for the latter in all 20 but one patient. The results suggest that a simplified mp-MRI protocol combining T2w and DWI may be a good compromise for a cost and time efficient, early-stage prostate cancer diagnostic programme, combining robust MR biomarkers for prostate cancer that can be reliably quantified and appear well-suited for general clinical practice. △ Less

Submitted 27 November, 2017; originally announced November 2017.

Comments: to appear in MRI

Comparison of CPMG and Uhrig Dynamic Decoupling (UDD) for tissue refocusing in MRI

Authors: Sophie Schirmer, Jonathan Phillips

Abstract: Two different dynamic decoupling strategies, the classic CPMG and the more recently proposed UDD protocol are compared in the context of magnetic resonance imaging (MRI). Both sequences were implemented on a 3T human MRI system and relaxometry was performed for a variety of tissue-mimicking agar and agarose gels. We find that CPMG provides moderately better decoupling than \UDD. The results are co… ▽ More Two different dynamic decoupling strategies, the classic CPMG and the more recently proposed UDD protocol are compared in the context of magnetic resonance imaging (MRI). Both sequences were implemented on a 3T human MRI system and relaxometry was performed for a variety of tissue-mimicking agar and agarose gels. We find that CPMG provides moderately better decoupling than \UDD. The results are consistent with experimental noise spectra obtained from \textit{in vivo} spectroscopy results, which suggest that the type of noise spectra obtained would favor \CPMG. Theoretical coherence pathway analysis further suggests that \UDD\ is more susceptible to systematic errors due to static magnetic and radio-frequency field inhomogeneity or imperfect excitation and refocusing pulse profiles. △ Less

Submitted 9 May, 2017; originally announced May 2017.

Design and Characterisation of Tissue-Mimicking Gel Phantoms for Diffusion Kurtosis Imaging

Authors: Ziyafer Gizem Portakal, Sophie Shermer, Emiliano Spezi, Teresa Perrett, Nina Tuncel, Jonathan Phillips

Abstract: Purpose: The aim of this work was to create tissue-mimicking gel phantoms appropriate for diffusion kurtosis imaging (DKI) for quality assurance, protocol optimization and sequence development. Methods: A range of agar, agarose and polyvinyl alcohol phantoms with concentrations ranging from 1.0% to 3.5%, 0.5% to 3.0% and 10% to 20%, respectively, and up to 3 g of glass microspheres per 100 ml we… ▽ More Purpose: The aim of this work was to create tissue-mimicking gel phantoms appropriate for diffusion kurtosis imaging (DKI) for quality assurance, protocol optimization and sequence development. Methods: A range of agar, agarose and polyvinyl alcohol phantoms with concentrations ranging from 1.0% to 3.5%, 0.5% to 3.0% and 10% to 20%, respectively, and up to 3 g of glass microspheres per 100 ml were created. Diffusion coefficients, excess kurtosis values and relaxation rates were experimentally determined. Results: The kurtosis values for the plain gels ranged from 0.05 with 95% confidence interval (CI) of $(0.029, 0.071)$ to $0.216(0.185, 0.246)$, well below the kurtosis values reported in the literature for various tissues. The addition of glass microspheres increased the kurtosis of the gels with values up to $0.523(0.465, 0.581)$ observed for gels with the highest concentration of microspheres. Repeat scans of some of the gels after more than six months of storage at room temperature indicate changes in the diffusion parameters of less than 10%. The addition of the glass microspheres reduces the apparent diffusion coefficients (ADCs) and increases the longitudinal and transverse relaxation rates but the values remain comparable to those for plain gels and tissue, with ADCs observed ranging from $818(585, 1053) \times 10^{-6}$ mm$^2$/s to $2257(2118, 2296) \times 10^{-6}$ mm$^2$/s, and R1 values ranging from $0.34(0.32, 0.35)$ 1/s to $0.51(0.50, 0.52)$ 1/s, and R2 values ranging from $9.69(9.34, 10.04)$ 1/s to $33.07(27.10, 39.04)$ 1/s. Conclusions: Glass microspheres can be used to effectively modify diffusion properties of gel phantoms and achieve a range of kurtosis values comparable to those reported for a variety of tissues. △ Less

Submitted 8 March, 2018; v1 submitted 30 August, 2016; originally announced August 2016.

Comments: To appear in Medical Physics

Student self-assessment and reflection in a learner controlled environment

Authors: Jeffrey A. Phillips

Abstract: Students who successfully engage in self-regulated learning, are able to plan their own studying, monitoring their progress and make any necessary adjustments based upon the data and feedback they gather. In order to promote this type of independent learning, a recent introductory mechanics course was modified such that the homework and tests emphasized the planning, monitoring and adjusting of se… ▽ More Students who successfully engage in self-regulated learning, are able to plan their own studying, monitoring their progress and make any necessary adjustments based upon the data and feedback they gather. In order to promote this type of independent learning, a recent introductory mechanics course was modified such that the homework and tests emphasized the planning, monitoring and adjusting of self-regulated learning. Students were able to choose many of their own out-of-class learning activities. Rather than collecting daily or weekly problem set solutions, assignments were mostly progress reports where students reported which activities they had attempted, self-assessment of their progress and plans for their next study session. Tests included wrappers where students were asked to reflect on their mistakes and plans for improvement. While many students only engaged superficially the independent aspects of the course, some did demonstrate evidence of self-regulation. Despite this lack of engagement, students performed as well as comparable student populations on course exam and better on the Force Concept Inventory. △ Less

Submitted 31 July, 2016; originally announced August 2016.

Metacognitive Training in Professional Development Can Improve and Sustain Student Achievement

Authors: Jeffrey A. Phillips, M. Catherine McElwain, Katharine W. Clemmer

Abstract: Secondary school students in the United States continue to underachieve in mathematics and science. Improving teacher quality is a core component of improving student achievement. Here we report on a professional development program, the MAST System, that develops the knowledge and skills for teaching mathematics, including metacognitive knowledge and regulation. In this cognitive apprenticeship p… ▽ More Secondary school students in the United States continue to underachieve in mathematics and science. Improving teacher quality is a core component of improving student achievement. Here we report on a professional development program, the MAST System, that develops the knowledge and skills for teaching mathematics, including metacognitive knowledge and regulation. In this cognitive apprenticeship program, teachers learn to plan, evaluate and adjust to improve student engagement and achievement. Central is the metacognitive practice of defense of instruction. By practicing this reflective approach, teachers become adaptive experts, able to innovate in the classroom. During the two-year intervention, the MAST System resulted in large increases in the California Standards Test mathematics scores, compared to both the district and the state. In addition, improvement continued for several years after the intervention was completed. This continued improvement in student scores indicated that the teachers and schools changed in a sustainable way. △ Less

Submitted 26 July, 2016; originally announced July 2016.

A Problem-Solving Framework to Assist Students and Teachers in STEM Courses

Authors: Jeffrey A. Phillips, Jeremy E. McCallum, Katharine W. Clemmer, Thomas M. Zachariah

Abstract: Well-developed problem-solving skills are essential for any student enrolled in a science, technology, engineering or mathematics (STEM) course as well as for graduates in the workforce. One of the most essential skills is the ability to monitor one's own progress and understanding while solving a problem. Successful monitoring during the entire solution allows a solver to identify errors within a… ▽ More Well-developed problem-solving skills are essential for any student enrolled in a science, technology, engineering or mathematics (STEM) course as well as for graduates in the workforce. One of the most essential skills is the ability to monitor one's own progress and understanding while solving a problem. Successful monitoring during the entire solution allows a solver to identify errors within a solution and make adjustments as necessary. To highlight this aspect of problem-solving, we have developed a framework and associated classroom activities that introduce students to monitoring (M) alongside the more traditional aspects of problem-solving models: analyzing the task (A), creating a plan (C), and executing the plan (E). This ACE-M framework has been successfully implemented in lower-division chemistry, mathematics and physics courses. Students enrolled in courses where ACE-M was used as the foundation for problem-solving instruction reported improved problem-solving self-efficacy, more monitoring while solving problems, and in many cases improved course grades. With this explicit instruction on self-monitoring, students are now introduced to expert problem-solving skills that will benefit them in their STEM careers. △ Less

Submitted 26 July, 2016; originally announced July 2016.

Progress Towards a Muonium Gravity Experiment

Authors: Daniel M. Kaplan, Klaus Kirch, Derrick C. Mancini, James D. Phillips, Thomas J. Phillips, Robert D. Reasenberg, Thomas J. Roberts, Jeff Terry

Abstract: The gravitational acceleration of antimatter, $\bar g$, has yet to be directly measured but could change our understanding of gravity, the Universe, and the possibility of a fifth force. Three avenues are apparent for such a measurement: antihydrogen, positronium, and muonium, the last requiring a precision atom interferometer and benefiting from a novel muonium beam under development. The interfe… ▽ More The gravitational acceleration of antimatter, $\bar g$, has yet to be directly measured but could change our understanding of gravity, the Universe, and the possibility of a fifth force. Three avenues are apparent for such a measurement: antihydrogen, positronium, and muonium, the last requiring a precision atom interferometer and benefiting from a novel muonium beam under development. The interferometer and its few-picometer alignment and calibration systems appear to be feasible. With 100 nm grating pitch, measurements of $\bar g$ to 10%, 1%, or better can be envisioned. This could constitute the first gravitational measurement of leptonic matter, of second-generation matter and, possibly, the first measurement of the gravitational acceleration of antimatter. △ Less

Submitted 31 October, 2016; v1 submitted 23 July, 2016; originally announced July 2016.

Comments: Presented at the Seventh Meeting on CPT and Lorentz Symmetry, Bloomington, Indiana, June 20-24, 2016

Report number: IIT-CAPP-16-4

Antimatter gravity with muonium

Authors: Daniel M Kaplan, Ephraim Fischbach, Klaus Kirch, Derrick C Mancini, James D Phillips, Thomas J Phillips, Robert D Reasenberg, Thomas J Roberts, Jeff Terry

Abstract: The gravitational acceleration of antimatter, $\bar{g}$, has never been directly measured and could bear importantly on our understanding of gravity, the possible existence of a fifth force, and the nature and early history of the universe. Three avenues appear feasible for such a measurement: antihydrogen, positronium, and muonium. The muonium measurement requires a novel monoenergetic, low-veloc… ▽ More The gravitational acceleration of antimatter, $\bar{g}$, has never been directly measured and could bear importantly on our understanding of gravity, the possible existence of a fifth force, and the nature and early history of the universe. Three avenues appear feasible for such a measurement: antihydrogen, positronium, and muonium. The muonium measurement requires a novel monoenergetic, low-velocity, horizontal muonium beam directed at an atom interferometer. The precision three-grating interferometer can be produced in silicon nitride or ultrananocrystalline diamond using state-of-the-art nanofabrication. The required precision alignment and calibration at the picometer level also appear to be feasible. With 100 nm grating pitch, a 10% measurement of $\bar{g}$ can be made using some months of surface-muon beam time, and a 1% or better measurement with a correspondingly larger exposure. This could constitute the first gravitational measurement of leptonic matter, of 2nd-generation matter and, possibly, the first measurement of the gravitational acceleration of antimatter. △ Less

Submitted 18 March, 2016; v1 submitted 26 January, 2016; originally announced January 2016.

Comments: 8 pages, 2 figures. Presented at the Third Workshop on Antimatter Gravity (WAG2015), London, England, 4-7 August 2015

Report number: IIT-CAPP-16-1

Efficient temperature-dependent Green's functions methods for realistic systems: compact grids for orthogonal polynomial transforms

Authors: Alexei A. Kananenka, Jordan J. Phillips, Dominika Zgid

Abstract: The temperature-dependent Matsubara Green's function that is used to describe temperature-dependent behavior is expressed on a numerical grid. While such a grid usually has a couple of hundred points for low-energy model systems, for realistic systems in large basis sets the size of an accurate grid can be tens of thousands of points, constituting a severe computational and memory bottleneck. In t… ▽ More The temperature-dependent Matsubara Green's function that is used to describe temperature-dependent behavior is expressed on a numerical grid. While such a grid usually has a couple of hundred points for low-energy model systems, for realistic systems in large basis sets the size of an accurate grid can be tens of thousands of points, constituting a severe computational and memory bottleneck. In this paper, we determine efficient imaginary time grids for the temperature-dependent Matsubara Green's function formalism that can be used for calculations on realistic systems. We show that due to the use of orthogonal polynomial transform, we can restrict the imaginary time grid to few hundred points and reach micro-Hartree accuracy in the electronic energy evaluation. Moreover, we show that only a limited number of orthogonal polynomial expansion coefficients are necessary to preserve accuracy when working with a dual representation of Green's function or self-energy and transforming between the imaginary time and Matsubara frequency domain. △ Less

Submitted 14 September, 2015; originally announced September 2015.

Journal ref: J. Chem. Theory Comput., 2016, 12, 564

Test of the CLAS12 RICH large scale prototype in the direct proximity focusing configuration

Authors: N. Baltzell, L. Barion, F. Benmokhtar, W. Brooks, E. Cisbani, M. Contalbrigo, A. El Alaoui, K. Hafidi, M. Hoek, V. Kubarovsky, L. Lagamba, V. Lucherini, R. Malaguti, M. Mirazita, R. A. Montgomery, A. Movsisyan, P. Musico, A. Orlandi, D. Orecchini, L. L. Pappalardo, R. Perrino, J. Phillips, S. Pisano, P. Rossi, S. Squerzanti , et al. (3 additional authors not shown)

Abstract: A large area ring-imaging Cherenkov detector has been designed to provide clean hadron identification capability in the momentum range from 3 GeV/c up to 8 GeV/c for the CLAS12 experiments at the upgraded 12 GeV continuous electron beam accelerator facility of Jefferson Laboratory. The adopted solution foresees a novel hybrid optics design based on aerogel radiator, composite mirrors and high-pack… ▽ More A large area ring-imaging Cherenkov detector has been designed to provide clean hadron identification capability in the momentum range from 3 GeV/c up to 8 GeV/c for the CLAS12 experiments at the upgraded 12 GeV continuous electron beam accelerator facility of Jefferson Laboratory. The adopted solution foresees a novel hybrid optics design based on aerogel radiator, composite mirrors and high-packed and high-segmented photon detectors. Cherenkov light will either be imaged directly (forward tracks) or after two mirror reflections (large angle tracks). We report here the results of the tests of a large scale prototype of the RICH detector performed with the hadron beam of the CERN T9 experimental hall for the direct detection configuration. The tests demonstrated that the proposed design provides the required pion-to-kaon rejection factor of 1:500 in the whole momentum range. △ Less

Submitted 1 February, 2016; v1 submitted 9 September, 2015; originally announced September 2015.

Comments: 15 pages, 23 figures, to appear on EPJA

Journal ref: Eur. Phys. J. A (2016) 52: 23

Unsteady turbulent buoyant plumes

Authors: Mark J. Woodhouse, Jeremy C. Phillips, Andrew J. Hogg

Abstract: We model the unsteady evolution of turbulent buoyant plumes following temporal changes to the source conditions. The integral model is derived from radial integration of the governing equations expressing the conservation of mass, axial momentum and buoyancy. The non-uniform radial profiles of the axial velocity and density deficit in the plume are explicitly described by shape factors in the inte… ▽ More We model the unsteady evolution of turbulent buoyant plumes following temporal changes to the source conditions. The integral model is derived from radial integration of the governing equations expressing the conservation of mass, axial momentum and buoyancy. The non-uniform radial profiles of the axial velocity and density deficit in the plume are explicitly described by shape factors in the integral equations; the commonly-assumed top-hat profiles lead to shape factors equal to unity. The resultant model is hyperbolic when the momentum shape factor, determined from the radial profile of the mean axial velocity, differs from unity. The solutions of the model when source conditions are maintained at constant values retain the form of the well-established steady plume solutions. We demonstrate that the inclusion of a momentum shape factor that differs from unity leads to a well-posed integral model. Therefore, our model does not exhibit the mathematical pathologies that appear in previously proposed unsteady integral models of turbulent plumes. A stability threshold for the value of the shape factor is identified, resulting in a range of its values where the amplitude of small perturbations to the steady solutions decay with distance from the source. The hyperbolic character of the system allows the formation of discontinuities in the fields describing the plume properties during the unsteady evolution. We compute numerical solutions to illustrate the transient development following an abrupt change in the source conditions. The adjustment to the new source conditions occurs through the propagation of a pulse of fluid through the plume. The dynamics of this pulse are described by a similarity solution and, by constructing this new similarity solution, we identify three regimes in which the evolution of the transient pulse following adjustment of the source qualitatively differ. △ Less

Submitted 23 July, 2015; originally announced July 2015.

Comments: 41 pages, 16 figures, under consideration for publication in Journal of Fluid Mechanics

Journal ref: J. Fluid Mech. (2016) vol. 794, pp 595-638

Ionization potentials and electron affinities from the extended Koopmans' theorem in self-consistent Green's function theory

Authors: Alicia Rae Welden, Jordan J. Phillips, Dominika Zgid

Abstract: One-body Green's function theories implemented on the real frequency axis offer a natural formalism for the unbiased theoretical determination of quasiparticle spectra in molecules and solids. Self-consistent Green's function methods employing the imaginary axis formalism on the other hand can benefit from the iterative implicit resummation of higher order diagrams that are not included when only… ▽ More One-body Green's function theories implemented on the real frequency axis offer a natural formalism for the unbiased theoretical determination of quasiparticle spectra in molecules and solids. Self-consistent Green's function methods employing the imaginary axis formalism on the other hand can benefit from the iterative implicit resummation of higher order diagrams that are not included when only the first iteration is performed. Unfortunately, the imaginary axis Green's function does not give direct access to the desired quasiparticle spectra, which undermines its utility. To this end we investigate how reliably one can calculate quasiparticle spectra from the Extended Koopmans' Theorem (EKT) applied to the imaginary time Green's function in a second order approximation (GF2). We find that EKT in conjunction with GF2 yields IPs and EAs that systematically underestimate experimental and accurate coupled-cluster reference values for a variety of molecules and atoms. This establishes that the EKT allows one to utilize the computational advantages of an imaginary axis implementation, while still being able to acquire real axis spectral properties. Because the EKT requires negligible computational effort, and can be used with a Green's function from any level of theory, we conclude that it is a potentially very useful tool for the systematic study of quasiparticle spectra in realistic systems. △ Less

Submitted 20 May, 2015; originally announced May 2015.

Fractional charge and spin errors in self-consistent Green's function theory

Authors: Jordan J. Phillips, Alexei A. Kananenka, Dominika Zgid

Abstract: We examine fractional charge and spin errors in self-consistent Green's function theory within a second-order approximation (GF2). For GF2 it is known that the summation of diagrams resulting from the self-consistent solution of the Dyson equation removes the divergences pathological to second-order Moller-Plesset theory (MP2) for strong correlations. In the language often used in density function… ▽ More We examine fractional charge and spin errors in self-consistent Green's function theory within a second-order approximation (GF2). For GF2 it is known that the summation of diagrams resulting from the self-consistent solution of the Dyson equation removes the divergences pathological to second-order Moller-Plesset theory (MP2) for strong correlations. In the language often used in density functional theory contexts, this means GF2 has a greatly reduced fractional spin error relative to MP2. The natural question then is what effect, if any, does the Dyson summation have on the fractional charge error in GF2? To this end we generalize our previous implementation of GF2 to open-shell systems and analyze its fractional spin and charge errors. We find that like MP2, GF2 possesses only a very small fractional charge error, and consequently little many electron self-interaction error. This shows that GF2 improves on the critical failings of MP2, but without altering the positive features that make it desirable. Furthermore, we find that GF2 has both less fractional charge and fractional spin errors than typical hybrid density functionals as well as random phase approximation with exchange. △ Less

Submitted 13 March, 2015; originally announced March 2015.

Journal ref: J. Chem. Phys. 142, 194108 (2015)

Measuring Antimatter Gravity with Muonium

Authors: Daniel M. Kaplan, Klaus Kirch, Derrick Mancini, James D. Phillips, Thomas J. Phillips, Thomas J. Roberts, Jeff Terry

Abstract: The gravitational acceleration of antimatter, $\bar{g}$, has never been directly measured and could bear importantly on our understanding of gravity, the possible existence of a fifth force, and the nature and early history of the universe. Only two avenues for such a measurement appear to be feasible: antihydrogen and muonium. The muonium measurement requires a novel, monoenergetic, low-velocity,… ▽ More The gravitational acceleration of antimatter, $\bar{g}$, has never been directly measured and could bear importantly on our understanding of gravity, the possible existence of a fifth force, and the nature and early history of the universe. Only two avenues for such a measurement appear to be feasible: antihydrogen and muonium. The muonium measurement requires a novel, monoenergetic, low-velocity, horizontal muonium beam directed at an atom interferometer. The precision three-grating interferometer can be produced in silicon nitride or ultrananocrystalline diamond using state-of-the-art nanofabrication. The required precision alignment and calibration at the picometer level also appear to be feasible. With 100 nm grating pitch, a 10% measurement of $\bar{g}$ can be made using some months of surface-muon beam time, and a 1% or better measurement with a correspondingly larger exposure. This could constitute the first gravitational measurement of leptonic matter, of 2nd-generation matter and, possibly, the first measurement of the gravitational acceleration of antimatter. △ Less

Submitted 10 December, 2014; originally announced December 2014.

Comments: 6 pages, 3 figures. To appear in Proc. ICNFP2014

Report number: IIT-CAPP-14-03

Local Hamiltonians for quantitative Green's function embedding methods

Authors: Alexander A. Rusakov, Jordan J. Phillips, Dominika Zgid

Abstract: Embedding calculations that find approximate solutions to the Schrödinger equation for large molecules and realistic solids are performed commonly in a three step procedure involving (i) construction of a model system with effective interactions approximating the low energy physics of the initial realistic system, (ii) mapping the model system onto an impurity Hamiltonian, and (iii) solving the im… ▽ More Embedding calculations that find approximate solutions to the Schrödinger equation for large molecules and realistic solids are performed commonly in a three step procedure involving (i) construction of a model system with effective interactions approximating the low energy physics of the initial realistic system, (ii) mapping the model system onto an impurity Hamiltonian, and (iii) solving the impurity problem. We have developed a novel procedure for parametrizing the impurity Hamiltonian that avoids the mathematically uncontrolled step of constructing the low energy model system. Instead, the impurity Hamiltonian is immediately parametrized to recover the self-energy of the realistic system in the limit of high frequencies or short time. The effective interactions parametrizing the fictitious impurity Hamiltonian are local to the embedded regions, and include all the non-local interactions present in the original realistic Hamiltonian in an implicit way. We show that this impurity Hamiltonian can lead to excellent total energies and self-energies that approximate the quantities of the initial realistic system very well. Moreover, we show that as long as the effective impurity Hamiltonian parametrization is designed to recover the self-energy of the initial realistic system for high frequencies, we can expect a good total energy and self-energy. Finally, we propose two practical ways of evaluating effective integrals for parametrizing impurity models. △ Less

Submitted 9 September, 2014; originally announced September 2014.

Comments: 11 pages, 10 figures

Journal ref: J. Chem. Phys. 141, 194105 (2014)

Cryogenic Dark Matter Search Detector Fabrication Process and Recent Improvements

Authors: Andrew Jastram, Rusty Harris, Rupak Mahapatra, James Phillips, Mark Platt, Kunj Prasad, Joel Sander, Sriteja Upadhyayula

Abstract: A dedicated facility has been commissioned for Cryogenic Dark Matter Search (CDMS) detector fabrication at Texas A&M University (TAMU). The fabrication process has been carefully tuned using this facility and its equipment. Production of successfully tested detectors has been demonstrated. Significant improvements in detector performance have been made using new fabrication methods/equipment and t… ▽ More A dedicated facility has been commissioned for Cryogenic Dark Matter Search (CDMS) detector fabrication at Texas A&M University (TAMU). The fabrication process has been carefully tuned using this facility and its equipment. Production of successfully tested detectors has been demonstrated. Significant improvements in detector performance have been made using new fabrication methods/equipment and tuning of process parameters. △ Less

Submitted 26 September, 2014; v1 submitted 1 August, 2014; originally announced August 2014.

The description of strong correlation within self-consistent Green's function second-order perturbation theory

Authors: Jordan J. Phillips, Dominika Zgid

Abstract: We report an implementation of self-consistent Green's function many-body theory within a second-order approximation (GF2) for application with molecular systems. This is done by iterative solution of the Dyson equation expressed in matrix form in an atomic orbital basis, where the Green's function and self-energy are built on the imaginary frequency and imaginary time domain respectively, and fas… ▽ More We report an implementation of self-consistent Green's function many-body theory within a second-order approximation (GF2) for application with molecular systems. This is done by iterative solution of the Dyson equation expressed in matrix form in an atomic orbital basis, where the Green's function and self-energy are built on the imaginary frequency and imaginary time domain respectively, and fast Fourier transform is used to efficiently transform these quantities as needed. We apply this method to several archetypical examples of strong correlation, such as a H$_{32}$ finite lattice that displays a highly multireference electronic ground state even at equilibrium lattice spacing. In all cases GF2 gives a physically meaningful description of the metal to insulator transition in these systems, without resorting to spin-symmetry breaking. Our results show that self-consistent Green's function many-body theory offers a viable route to describing strong correlations while remaining within a computationally tractable single-particle formalism. △ Less

Submitted 13 May, 2014; originally announced May 2014.

Journal ref: J. Chem. Phys. 140, 241101 (2014)

Design and operation of a cryogenic charge-integrating preamplifier for the MuSun experiment

Authors: R. A. Ryan, F. Wauters, F. E. Gray, P. Kammel, A. Nadtochy, D. Peterson, T. van Wechel, E. Gross, M. Gubanich, L. Kochenda, P. Kravtsov, M. H. Murray, D. Orozco, R. Osofsky, G. E. Petrov, J. D. Phillips, J. Stroud, V. Trofimov, A. Vasilyev, M. Vznuzdaev

Abstract: The central detector in the MuSun experiment is a pad-plane time projection ionization chamber that operates without gas amplification in deuterium at 31 K; it is used to measure the rate of the muon capture process $μ^- + d \rightarrow n + n + ν_μ$. A new charge-sensitive preamplifier, operated at 140 K, has been developed for this detector. It achieved a resolution of 4.5 keV(D$_2$) or 120… ▽ More The central detector in the MuSun experiment is a pad-plane time projection ionization chamber that operates without gas amplification in deuterium at 31 K; it is used to measure the rate of the muon capture process $μ^- + d \rightarrow n + n + ν_μ$. A new charge-sensitive preamplifier, operated at 140 K, has been developed for this detector. It achieved a resolution of 4.5 keV(D$_2$) or 120 $e^-$ RMS with zero detector capacitance at 1.1 $μ$s integration time in laboratory tests. In the experimental environment, the electronic resolution is 10 keV(D$_2$) or 250 $e^-$ RMS at a 0.5 $μ$s integration time. The excellent energy resolution of this amplifier has enabled discrimination between signals from muon-catalyzed fusion and muon capture on chemical impurities, which will precisely determine systematic corrections due to these processes. It is also expected to improve the muon tracking and determination of the stopping location. △ Less

Submitted 12 May, 2014; v1 submitted 11 April, 2014; originally announced April 2014.

Comments: 18 pages + title page, 13 figures, to be submitted to JINST; minor corrections, added one reference, updated author list

Measuring Antimatter Gravity with Muonium

Authors: Daniel M. Kaplan, Derrick Mancini, Thomas J. Phillips, Thomas J. Roberts, Jeffrey Terry, Richard Gustafson, Klaus Kirch

Abstract: We consider a measurement of the gravitational acceleration of antimatter, gbar, using muonium. A monoenergetic, low-velocity, horizontal muonium beam will be formed from a surface-muon beam using a novel technique and directed at an atom interferometer. The measurement requires a precision three-grating interferometer: the first grating pair creates an interference pattern which is analyzed by sc… ▽ More We consider a measurement of the gravitational acceleration of antimatter, gbar, using muonium. A monoenergetic, low-velocity, horizontal muonium beam will be formed from a surface-muon beam using a novel technique and directed at an atom interferometer. The measurement requires a precision three-grating interferometer: the first grating pair creates an interference pattern which is analyzed by scanning the third grating vertically using piezo actuators. State-of-the-art nanofabrication can produce the needed membrane grating structure in silicon nitride or ultrananoscrystalline diamond. With 100 nm grating pitch, a 10% measurement of gbar can be made using some months of surface-muon beam time. This will be the first gravitational measurement of leptonic matter, of 2nd-generation matter and, possibly, the first measurement of the gravitational acceleration of antimatter. △ Less

Submitted 12 August, 2013; v1 submitted 4 August, 2013; originally announced August 2013.

Comments: 5 pages, 2 figures. Prepared for Snowmass 2013 U.S. Community Summer Study of the Division of Particles and Fields of the American Physical Society

Report number: IIT-CAPP-13-6

Analysis and simulation of the operation of a Kelvin probe

Authors: Robert D. Reasenberg, Kathleen P. Donahue, James D. Phillips

Abstract: Experiments that measure extremely small gravitational forces are often hampered by the presence of non-gravitational forces that can neither be calculated nor separately measured. Among these spurious forces is electrostatic attraction between a test mass and its surroundings due to the presence of spatially varying surface potential known as the "patch effect." In order to make surfaces with sma… ▽ More Experiments that measure extremely small gravitational forces are often hampered by the presence of non-gravitational forces that can neither be calculated nor separately measured. Among these spurious forces is electrostatic attraction between a test mass and its surroundings due to the presence of spatially varying surface potential known as the "patch effect." In order to make surfaces with small surface potential variation, it is necessary to be able to measure it. A Kelvin probe (KP) measures contact potential difference (CPD), using the time-varying capacitance between the sample and a vibrating tip that is biased with a backing potential. Assuming that the tip remains constant, this measures the sample's surface potential variation. We examine the operation of the KP from the perspective of parameter estimation in the presence of noise. We show that, when the CPD is estimated from measurements at two separate backing potentials, the standard deviation of the optimal estimate depends on the total observing time. Further, the observing time may be unevenly divided between the two backing potentials, provided the values of those potentials are correspondingly set. We simulate a two-stage KP data analysis, including a sub-optimal estimator with advantages for real-time operation. Based on the real-time version, we present a novel approach to stabilizing the average distance of the tip from the sample. We also present the results of a series of covariance analyses that validate and bound the applicability of the suboptimal estimator, make a comparison with the results of an optimal estimator and guide the user. We discuss the application of the KP to the LISA and to a test of the weak equivalence principle. △ Less

Submitted 3 June, 2013; originally announced June 2013.

Comments: 26 pages, 11 figures

Journal ref: Class. Quantum Grav. 30 (2013) 125016

Detailed Report of the MuLan Measurement of the Positive Muon Lifetime and Determination of the Fermi Constant

Authors: V. Tishchenko, S. Battu, R. M. Carey, D. B. Chitwood, J. Crnkovic, P. T. Debevec, S. Dhamija, W. Earle, A. Gafarov, K. Giovanetti, T. P. Gorringe, F. E. Gray, Z. Hartwig, D. W. Hertzog, B. Johnson, P. Kammel, B. Kiburg, S. Kizilgul, J. Kunkle, B. Lauss, I. Logashenko, K. R. Lynch, R. McNabb, J. P. Miller, F. Mulhauser , et al. (8 additional authors not shown)

Abstract: We present a detailed report of the method, setup, analysis and results of a precision measurement of the positive muon lifetime. The experiment was conducted at the Paul Scherrer Institute using a time-structured, nearly 100%-polarized, surface muon beam and a segmented, fast-timing, plastic scintillator array. The measurement employed two target arrangements; a magnetized ferromagnetic target wi… ▽ More We present a detailed report of the method, setup, analysis and results of a precision measurement of the positive muon lifetime. The experiment was conducted at the Paul Scherrer Institute using a time-structured, nearly 100%-polarized, surface muon beam and a segmented, fast-timing, plastic scintillator array. The measurement employed two target arrangements; a magnetized ferromagnetic target with a ~4 kG internal magnetic field and a crystal quartz target in a 130 G external magnetic field. Approximately 1.6 x 10^{12} positrons were accumulated and together the data yield a muon lifetime of tau_{mu}(MuLan) = 2196980.3(2.2) ps (1.0 ppm), thirty times more precise than previous generations of lifetime experiments. The lifetime measurement yields the most accurate value of the Fermi constant G_F (MuLan) = 1.1663787(6) x 10^{-5} GeV^{-2} (0.5 ppm). It also enables new precision studies of weak interactions via lifetime measurements of muonic atoms. △ Less

Submitted 5 November, 2012; originally announced November 2012.

Comments: Submitted for publication in Phys. Rev. D (32 pages, 28 figures, 5 tables)

Infrared/Terahertz double resonance spectroscopy of CH3F and CH3Cl at atmospheric pressure

Authors: Dane J. Phillips, Elizabeth A. Tanner, Frank C. De Lucia, Henry O. Everitt

Abstract: A new method for highly selective remote sensing of atmospheric trace polar molecular gases is described. Based on infrared/terahertz double resonance spectroscopic techniques, the molecule- specific coincidence between the lines of a CO2 laser and rotational-vibrational molecular absorption transitions provide two dimensions of recognition specificity: infrared coincidence frequency and the corre… ▽ More A new method for highly selective remote sensing of atmospheric trace polar molecular gases is described. Based on infrared/terahertz double resonance spectroscopic techniques, the molecule- specific coincidence between the lines of a CO2 laser and rotational-vibrational molecular absorption transitions provide two dimensions of recognition specificity: infrared coincidence frequency and the corresponding terahertz frequency whose absorption strength is modulated by the laser. Atmospheric pressure broadening expands the molecular recognition "specificity matrix" by simultaneously relaxing the infrared coincidence requirement and strengthening the corresponding terahertz signature. Representative double resonance spectra are calculated for prototypical molecules CH3F and CH3Cl and their principal isotopomers, from which a heuristic model is developed to estimate the specificity matrix and double resonance signature strength for any polar molecule. △ Less

Submitted 12 May, 2012; v1 submitted 2 February, 2012; originally announced February 2012.

Comments: 70 pages, 7 figures, 6 tables, 38 references, appendix with complete tables

Globalization and Glassy Ideality of the Web of Twentieth Century Science

Authors: J. C. Phillips

Abstract: Scientific communication is an essential part of modern science: whereas Archimedes worked alone, Newton (correspondence with Hooke, 1676) acknowledged that "If I have seen a little further, it is by standing on the shoulders of Giants." How is scientific communication reflected in the patterns of citations in scientific papers? How have these patterns changed in the 20th century, as both means of… ▽ More Scientific communication is an essential part of modern science: whereas Archimedes worked alone, Newton (correspondence with Hooke, 1676) acknowledged that "If I have seen a little further, it is by standing on the shoulders of Giants." How is scientific communication reflected in the patterns of citations in scientific papers? How have these patterns changed in the 20th century, as both means of communication and individual transportation changed rapidly, compared to the earlier post-Newton 18th and 19th centuries? Here we discuss a glass model for scientific communications, based on a unique 2009 scientometric study of 25 million papers and 600 million citations that encapsulates the epistemology of modern science. The glass model predicts and explains, using no adjustable parameters, a surprisingly universal internal structure in the development of scientific research, which is essentially constant across the natural sciences, but which because of globalization changed qualitatively around 1960. Globalization corresponds physically to anomalous superdiffusion, which has been observed near the molecular glass transition, and can enhance molecular diffusion by factors as large as 100. △ Less

Submitted 23 August, 2010; originally announced August 2010.

Topology and the Web of Twentieth Century Science

Authors: J. C. Phillips

Abstract: Scientific communication is an essential part of modern science: whereas Archimedes worked alone, Newton (1676) acknowledged that "If I have seen a little further, it is by standing on the shoulders of Giants." How is scientific communication reflected in the patterns of citations in scientific papers? How have these patterns changed in the 20th century, as both means of communication and indivi… ▽ More Scientific communication is an essential part of modern science: whereas Archimedes worked alone, Newton (1676) acknowledged that "If I have seen a little further, it is by standing on the shoulders of Giants." How is scientific communication reflected in the patterns of citations in scientific papers? How have these patterns changed in the 20th century, as both means of communication and individual transportation changed rapidly, compared to the earlier post-Newton 18th and 19th centuries? Here we discuss a physical model for scientific communications, based on an informetric study of 25 million papers and 600 million citations; the physical model itself relies on analogies with glass relaxation, where virtually identical patterns have been identified in 50 well designed experiments. The model reveals a surprisingly universal internal structure in the development of scientific research, which is essentially constant across the natural sciences, but which changed qualitatively around 1960. △ Less

Submitted 29 September, 2009; originally announced September 2009.

Selective Atomic Heating in Plasmas: Implications for Quantum Theory

Authors: Jonathan Phillips

Abstract: A new model of quantum mechanics, Classical Quantum Mechanics, is based on the (nearly heretical) postulate that electrons are physical objects that obey classical physical laws. Indeed, ionization energies, excitation energies etc. are computed based on picturing electrons as bubbles of charge that symmetrically surround a nucleus. Hence, for example, simple algebraic expressions based on Newto… ▽ More A new model of quantum mechanics, Classical Quantum Mechanics, is based on the (nearly heretical) postulate that electrons are physical objects that obey classical physical laws. Indeed, ionization energies, excitation energies etc. are computed based on picturing electrons as bubbles of charge that symmetrically surround a nucleus. Hence, for example, simple algebraic expressions based on Newtonian force balances are used to predict ionization energies and stable excitation states with remarkable precision. One of the most startling predictions of the model is that there are stable sizes of the hydrogen atom electron (bubble diameter) that are smaller (called hydrinos) than that calculated for the standard ground state. Experimental evidence in support of this novel physical/classical version of quantum is alleged to be found in the existence of super heated hydrogen atoms reported by many teams in a variety of plasmas. It is postulated that the energy required for creating super heated H aoms comes from the shrinkage of ground state H atoms to form hydrinos. This claim is discussed with reference to a brief review of the published studies of line broadening. △ Less

Submitted 29 October, 2008; originally announced October 2008.

Comments: 10 pages, 6 figures, presented at IWSSPP in Kiten, bulgaria July 2008