-
Heterogeneous cavitation from atomically smooth liquid-liquid interfaces
Authors:
Patricia Pfeiffer,
Meysam Shahrooz,
Marco Tortora,
Carlo Massimo Casciola,
Ryan Holman,
Rares Salomir,
Simone Meloni,
Claus-Dieter Ohl
Abstract:
Pressure reduction in liquids may result in vaporization and bubble formation. This thermodynamic process is termed cavitation. It is commonly observed in hydraulic machinery, ship propellers, and even in medical therapy within the human body. While cavitation may be beneficial for the removal of malign tissue, yet in many cases it is unwanted due to its ability to erode nearly any material in clo…
▽ More
Pressure reduction in liquids may result in vaporization and bubble formation. This thermodynamic process is termed cavitation. It is commonly observed in hydraulic machinery, ship propellers, and even in medical therapy within the human body. While cavitation may be beneficial for the removal of malign tissue, yet in many cases it is unwanted due to its ability to erode nearly any material in close contact. Current understanding is that the origin of heterogeneous cavitation are nucleation sites where stable gas cavities reside, e.g., on contaminant particles, submerged surfaces or shell stabilized microscopic bubbles. Here, we present the finding of a so far unreported nucleation site, namely the atomically smooth interface between two immiscible liquids. The non-polar liquid of the two has a higher gas solubility and acts upon pressure reduction as a gas reservoir that accumulates at the interface. We describe experiments that clearly reveal the formation of cavitation on non-polar droplets in contact with water and elucidate the working mechanism that leads to the nucleation of gas pockets through simulations.
△ Less
Submitted 2 June, 2023;
originally announced June 2023.
-
High-accuracy numerical models of Brownian thermal noise in thin mirror coatings
Authors:
Nils L. Vu,
Samuel Rodriguez,
Tom Włodarczyk,
Geoffrey Lovelace,
Harald P. Pfeiffer,
Gabriel S. Bonilla,
Nils Deppe,
François Hébert,
Lawrence E. Kidder,
Jordan Moxon,
William Throwe
Abstract:
Brownian coating thermal noise in detector test masses is limiting the sensitivity of current gravitational-wave detectors on Earth. Therefore, accurate numerical models can inform the ongoing effort to minimize Brownian coating thermal noise in current and future gravitational-wave detectors. Such numerical models typically require significant computational resources and time, and often involve c…
▽ More
Brownian coating thermal noise in detector test masses is limiting the sensitivity of current gravitational-wave detectors on Earth. Therefore, accurate numerical models can inform the ongoing effort to minimize Brownian coating thermal noise in current and future gravitational-wave detectors. Such numerical models typically require significant computational resources and time, and often involve closed-source commercial codes. In contrast, open-source codes give complete visibility and control of the simulated physics, enable direct assessment of the numerical accuracy, and support the reproducibility of results. In this article, we use the open-source SpECTRE numerical relativity code and adopt a novel discontinuous Galerkin numerical method to model Brownian coating thermal noise. We demonstrate that SpECTRE achieves significantly higher accuracy than a previous approach at a fraction of the computational cost. Furthermore, we numerically model Brownian coating thermal noise in multiple sub-wavelength crystalline coating layers for the first time. Our new numerical method has the potential to enable fast exploration of realistic mirror configurations, and hence to guide the search for optimal mirror geometries, beam shapes and coating materials for gravitational-wave detectors.
△ Less
Submitted 11 July, 2023; v1 submitted 12 November, 2021;
originally announced November 2021.
-
A scalable elliptic solver with task-based parallelism for the SpECTRE numerical relativity code
Authors:
Nils L. Vu,
Harald P. Pfeiffer,
Gabriel S. Bonilla,
Nils Deppe,
François Hébert,
Lawrence E. Kidder,
Geoffrey Lovelace,
Jordan Moxon,
Mark A. Scheel,
Saul A. Teukolsky,
William Throwe,
Nikolas A. Wittek,
Tom Włodarczyk
Abstract:
Elliptic partial differential equations must be solved numerically for many problems in numerical relativity, such as initial data for every simulation of merging black holes and neutron stars. Existing elliptic solvers can take multiple days to solve these problems at high resolution and when matter is involved, because they are either hard to parallelize or require a large amount of computationa…
▽ More
Elliptic partial differential equations must be solved numerically for many problems in numerical relativity, such as initial data for every simulation of merging black holes and neutron stars. Existing elliptic solvers can take multiple days to solve these problems at high resolution and when matter is involved, because they are either hard to parallelize or require a large amount of computational resources. Here we present a new solver for linear and nonlinear elliptic problems that is designed to scale with resolution and to parallelize on computing clusters. To achieve this we employ a discontinuous Galerkin discretization, an iterative multigrid-Schwarz preconditioned Newton-Krylov algorithm, and a task-based parallelism paradigm. To accelerate convergence of the elliptic solver we have developed novel subdomain-preconditioning techniques. We find that our multigrid-Schwarz preconditioned elliptic solves achieve iteration counts that are independent of resolution, and our task-based parallel programs scale over 200 million degrees of freedom to at least a few thousand cores. Our new code solves a classic initial data problem for binary black holes faster than the spectral code SpEC when distributed to only eight cores, and in a fraction of the time on more cores. It is publicly accessible in the next-generation SpECTRE numerical relativity code. Our results pave the way for highly parallel elliptic solves in numerical relativity and beyond.
△ Less
Submitted 18 April, 2022; v1 submitted 12 November, 2021;
originally announced November 2021.
-
Unified discontinuous Galerkin scheme for a large class of elliptic equations
Authors:
Nils L. Fischer,
Harald P. Pfeiffer
Abstract:
We present a discontinuous Galerkin internal-penalty scheme that is applicable to a large class of linear and nonlinear elliptic partial differential equations. The unified scheme can accommodate all second-order elliptic equations that can be formulated in first-order flux form, encompassing problems in linear elasticity, general relativity, and hydrodynamics, including problems formulated on a c…
▽ More
We present a discontinuous Galerkin internal-penalty scheme that is applicable to a large class of linear and nonlinear elliptic partial differential equations. The unified scheme can accommodate all second-order elliptic equations that can be formulated in first-order flux form, encompassing problems in linear elasticity, general relativity, and hydrodynamics, including problems formulated on a curved manifold. It allows for a wide range of linear and nonlinear boundary conditions, and accommodates curved and nonconforming meshes. Our generalized internal-penalty numerical flux and our Schur-complement strategy of eliminating auxiliary degrees of freedom make the scheme compact without requiring equation-specific modifications. We demonstrate the accuracy of the scheme for a suite of numerical test problems. The scheme is implemented in the open-source SpECTRE numerical relativity code.
△ Less
Submitted 11 January, 2022; v1 submitted 12 August, 2021;
originally announced August 2021.
-
Surface wrinkling of freely-floating smectic bubbles
Authors:
Patricia Pfeiffer
Abstract:
Bubbles made of smectic liquid crystals (LC) can display buckling and wrinkling. These deformations are induced in the course of the relaxation of an elongated bubble towards a sphere. The bubbles are created through the collapse of a catenoid LC film. Two mechanisms leading to wrinkles are reported: (a) Compression of the smectic film by outer forces, and (b) Invagination of the bubble shortly af…
▽ More
Bubbles made of smectic liquid crystals (LC) can display buckling and wrinkling. These deformations are induced in the course of the relaxation of an elongated bubble towards a sphere. The bubbles are created through the collapse of a catenoid LC film. Two mechanisms leading to wrinkles are reported: (a) Compression of the smectic film by outer forces, and (b) Invagination of the bubble shortly after formation. The flow on the bubble surface is analyzed, providing insight into how the outer forces act on the bubble and induce local surface deformation. It is found that the orientation of the wrinkles depends on the direction of the acting force. The wavelength of the wrinkles is analyzed over time. Additionally, the formation of small protrusions outside the film area (i.e., tubuli) is described.
△ Less
Submitted 4 August, 2020; v1 submitted 14 November, 2019;
originally announced November 2019.
-
Merging of Soap Bubbles and Why Surfactant Matters
Authors:
Patricia Pfeiffer,
Qingyun Zeng,
Beng Hau Tan,
Claus-Dieter Ohl
Abstract:
The merging of two soap bubbles is a fundamental fluid mechanical process in foam formation. In the present experimental study the liquid films from two soap bubbles are brought together. Once the liquid layers initially separated by a gas sheet are bridged on a single spot the rapid merging of the two liquid films proceed. Thereby the connecting rim is rapidly accelerated into the separating gas…
▽ More
The merging of two soap bubbles is a fundamental fluid mechanical process in foam formation. In the present experimental study the liquid films from two soap bubbles are brought together. Once the liquid layers initially separated by a gas sheet are bridged on a single spot the rapid merging of the two liquid films proceed. Thereby the connecting rim is rapidly accelerated into the separating gas layer. We show that due to the dimple formation the velocity is not uniform and the high acceleration causes initially a Rayleigh-Taylor instability of the liquid rim. At later times, the rim takes heals into a circular shape. However for sufficient high concentrations of the surfactant the unstable rim pinches off microbubbles resulting in a fractal dendritic structure after coalescence.
△ Less
Submitted 22 January, 2020; v1 submitted 8 November, 2019;
originally announced November 2019.
-
A hp-adaptive discontinuous Galerkin solver for elliptic equations in numerical relativity
Authors:
Trevor Vincent,
Harald P. Pfeiffer,
Nils L. Fischer
Abstract:
A considerable amount of attention has been given to discontinuous Galerkin methods for hyperbolic problems in numerical relativity, showing potential advantages of the methods in dealing with hydrodynamical shocks and other discontinuities. This paper investigates discontinuous Galerkin methods for the solution of elliptic problems in numerical relativity. We present a novel hp-adaptive numerical…
▽ More
A considerable amount of attention has been given to discontinuous Galerkin methods for hyperbolic problems in numerical relativity, showing potential advantages of the methods in dealing with hydrodynamical shocks and other discontinuities. This paper investigates discontinuous Galerkin methods for the solution of elliptic problems in numerical relativity. We present a novel hp-adaptive numerical scheme for curvilinear and non-conforming meshes. It uses a multigrid preconditioner with a Chebyshev or Schwarz smoother to create a very scalable discontinuous Galerkin code on generic domains. The code employs compactification to move the outer boundary near spatial infinity. We explore the properties of the code on some test problems, including one mimicking Neutron stars with phase transitions. We also apply it to construct initial data for two or three black holes.
△ Less
Submitted 2 July, 2019;
originally announced July 2019.
-
Dynamics of soliton crystals in optical microresonators
Authors:
Maxim Karpov,
Martin H. P. Pfeiffer,
Hairun Guo,
Wenle Weng,
Junqiu Liu,
Tobias J. Kippenberg
Abstract:
Dissipative Kerr solitons in optical microresonators provide a unifying framework for nonlinear optical physics with photonic-integrated technologies and have recently been employed in a wide range of applications from coherent communications to astrophysical spectrometer calibration. Dissipative Kerr solitons can form a rich variety of stable states, ranging from breathers to multiple-soliton for…
▽ More
Dissipative Kerr solitons in optical microresonators provide a unifying framework for nonlinear optical physics with photonic-integrated technologies and have recently been employed in a wide range of applications from coherent communications to astrophysical spectrometer calibration. Dissipative Kerr solitons can form a rich variety of stable states, ranging from breathers to multiple-soliton formations, among which, the recently discovered soliton crystals stand out. They represent temporally-ordered ensembles of soliton pulses, which can be regularly arranged by a modulation of the continuous-wave intracavity driving field. To date, however, the dynamics of soliton crystals remains mainly unexplored. Moreover, the vast majority of the reported crystals contained defects - missing or shifted pulses, breaking the symmetry of these states, and no procedure to avoid such defects was suggested. Here we explore the dynamical properties of soliton crystals and discover that often-neglected chaotic operating regimes of the driven optical microresonator are the key to their understanding. In contrast to prior work, we prove the viability of deterministic generation of $\mathrm{perfect}$ soliton crystal states, which correspond to a stable, defect-free lattice of optical pulses inside the cavity. We discover the existence of critical pump power, below which the stochastic process of soliton excitation suddenly becomes deterministic enabling faultless, device-independent access to perfect soliton crystals. Furthermore, we demonstrate the switching of soliton crystal states and prove that it is also tightly linked to the pump power and is only possible in the regime of transient chaos. Finally, we report a number of other dynamical phenomena experimentally observed in soliton crystals including the formation of breathers, transitions between soliton crystals, their melting, and recrystallization.
△ Less
Submitted 3 September, 2019; v1 submitted 17 March, 2019;
originally announced March 2019.
-
Soliton microcomb based spectral domain optical coherence tomography
Authors:
Paul J. Marchand,
J. Connor Skehan,
Johann Riemensberger,
Jia-Jung Ho,
Martin H. P. Pfeiffer,
Junqiu Liu,
Christoph Hauger,
Theo Lasser,
Tobias J. Kippenberg
Abstract:
Spectral domain optical coherence tomography (SD-OCT) is a widely used and minimally invaive technique for bio-medical imaging [1]. SD-OCT typically relies on the use of superluminescent diodes (SLD), which provide a low-noise and broadband optical spectrum. Recent advances in photonic chipscale frequency combs [2, 3] based on soliton formation in photonic integrated microresonators provide an chi…
▽ More
Spectral domain optical coherence tomography (SD-OCT) is a widely used and minimally invaive technique for bio-medical imaging [1]. SD-OCT typically relies on the use of superluminescent diodes (SLD), which provide a low-noise and broadband optical spectrum. Recent advances in photonic chipscale frequency combs [2, 3] based on soliton formation in photonic integrated microresonators provide an chipscale alternative illumination scheme for SD-OCT. Yet to date, the use of such soliton microcombs in OCT has not yet been analyzed. Here we explore the use of soliton microcombs in spectral domain OCT and show that, by using photonic chipscale Si3N4 resonators in conjunction with 1300 nm pump lasers, spectral bandwidths exceeding those of commercial SLDs are possible. We demonstrate that the soliton states in microresonators exhibit a noise floor that is ca. 3 dB lower than for the SLD at identical power, but can exhibit significantly lower noise performance for powers at the milliWatt level. We perform SD-OCT imaging on an ex vivo fixed mouse brain tissue using the soliton microcomb, alongside an SLD for comparison, and demonstrate the principle viability of soliton based SD-OCT. Importantly, we demonstrate that classical amplitude noise of all soliton comb teeth are correlated, i.e. common mode, in contrast to SLD or incoherent microcomb states [4], which should, in theory, improve the image quality. Moreover, we demonstrate the potential for circular ranging, i.e. optical sub-sampling [5, 6], due to the high coherence and temporal periodicity of the soliton state. Taken together, our work indicates the promising properties of soliton microcombs for SD-OCT.
△ Less
Submitted 19 March, 2020; v1 submitted 19 February, 2019;
originally announced February 2019.
-
Photonic jet: key role of injection for etchings with a shaped optical fiber tip
Authors:
Robin Pierron,
Julien Zelgowski,
Pierre Pfeiffer,
Joël Fontaine,
Sylvain Lecler
Abstract:
We demonstrate the key role of the laser injection into a multimode fiber to obtain a photonic jet (PJ). PJ, a high concentrated propagating beam with a full width at half maximum smaller than the diffraction limit, is here generated with a shaped optical fiber tip using a pulsed laser source (1064~nm, 100~ns, 35~kHz). Three optical injection systems of light are compared. For similar etched marks…
▽ More
We demonstrate the key role of the laser injection into a multimode fiber to obtain a photonic jet (PJ). PJ, a high concentrated propagating beam with a full width at half maximum smaller than the diffraction limit, is here generated with a shaped optical fiber tip using a pulsed laser source (1064~nm, 100~ns, 35~kHz). Three optical injection systems of light are compared. For similar etched marks on silicon with diameters around 1~$μ$m, we show that the required ablation energy is minimum when the injected light beam is close to the fundamental mode diameter of the fiber. Thus, we confirm experimentally that to obtain a PJ out of an optical fiber, light injection plays a role as important as that of the tip shape, and therefore the role of the fundamental mode in the process.
△ Less
Submitted 26 October, 2018;
originally announced November 2018.
-
Etching of semiconductors and metals by the photonic jet with shaped optical fiber tips
Authors:
Robin Pierron,
Sylvain Lecler,
Julien Zelgowski,
Pierre Pfeiffer,
Frédéric Mermet,
Joël Fontaine
Abstract:
The etching of semiconductors and metals by a photonic jet (PJ) generated with a shaped optical ber tip is studied. Etched marks with a diameter of 1 micron have been realized on silicon, stainless steel and titanium with a 35 kHz pulsed laser, emitting 100 ns pulses at 1064 nm. The selection criteria of the ber and its tip are discussed. We show that a 100/140 silica ber is a good compromise whic…
▽ More
The etching of semiconductors and metals by a photonic jet (PJ) generated with a shaped optical ber tip is studied. Etched marks with a diameter of 1 micron have been realized on silicon, stainless steel and titanium with a 35 kHz pulsed laser, emitting 100 ns pulses at 1064 nm. The selection criteria of the ber and its tip are discussed. We show that a 100/140 silica ber is a good compromise which takes into account the injection, the working distance and the energy coupled in the higherorder modes. The energy balance is performed on the basis of the known ablation threshold of the material. Finally, the dependence between the etching depth and the number of pulses is studied. Saturation is observed probably due to a redeposition of the etched material, showing that a higher pulse energy is required for deeper etchings.
△ Less
Submitted 26 October, 2018;
originally announced November 2018.
-
Photonic jet: direct micro-peak machining
Authors:
Robin Pierron,
Pierre Pfeiffer,
Grégoire Chabrol,
Sylvain Lecler
Abstract:
We report on the rst evidence of direct micropeak machining using a photonic jet (PJ) with nanosecond laser pulses. PJ is a high concentrated propagative light beam with a full width at half maximum (FWHM) smaller than the diraction limit. In our case, PJs are generated with a shaped optical ber tip. Micropeaks with a FWHM of around 1 $μ$m, a height until 590 nm and an apex radius of 14 nm, were r…
▽ More
We report on the rst evidence of direct micropeak machining using a photonic jet (PJ) with nanosecond laser pulses. PJ is a high concentrated propagative light beam with a full width at half maximum (FWHM) smaller than the diraction limit. In our case, PJs are generated with a shaped optical ber tip. Micropeaks with a FWHM of around 1 $μ$m, a height until 590 nm and an apex radius of 14 nm, were repeatability achieved on a silicon wafer. The experiments have been carried out in ambient air using a 100/140 multimode silica ber with a shaped tip along with a 35 kHz pulsed laser emitting 100 ns pulses at 1064 nm. This study shows that the phenomenon occurs only at low energies, just under the ablation threshold. Bulk material appears to have moved around to achieve the peaks in a selforganized process. We hypothesize that the matter was melted and not vaporized; hydrodynamic ow of molten material governed by surfacetension forces may be the causes. This surface modication has many applications. For example, this paper reports on the decrease of wettability of a textured silicon wafer.
△ Less
Submitted 26 October, 2018;
originally announced November 2018.
-
Ultralow-power chip-based soliton microcombs for photonic integration
Authors:
Junqiu Liu,
Arslan S. Raja,
Maxim Karpov,
Bahareh Ghadiani,
Martin H. P. Pfeiffer,
Nils J. Engelsen,
Hairun Guo,
Michael Zervas,
Tobias J. Kippenberg
Abstract:
The generation of dissipative Kerr solitons in optical microresonators has provided a route to compact frequency combs of high repetition rate, which have already been employed for optical frequency synthesizers, ultrafast ranging, coherent telecommunication and dual-comb spectroscopy. Silicon nitride (Si$_3$N$_4$) microresonators are promising for photonic integrated soliton microcombs. Yet to da…
▽ More
The generation of dissipative Kerr solitons in optical microresonators has provided a route to compact frequency combs of high repetition rate, which have already been employed for optical frequency synthesizers, ultrafast ranging, coherent telecommunication and dual-comb spectroscopy. Silicon nitride (Si$_3$N$_4$) microresonators are promising for photonic integrated soliton microcombs. Yet to date, soliton formation in Si$_3$N$_4$ microresonators at electronically detectable repetition rates, typically less than 100 GHz, is hindered by the requirement of external power amplifiers, due to the low quality ($Q$) factors, as well as by thermal effects which necessitate the use of frequency agile lasers to access the soliton state. These requirements complicate future photonic integration, heterogeneous or hybrid, of soliton microcomb devices based on Si$_3$N$_4$ microresonators with other active or passive components. Here, using the photonic Damascene reflow process, we demonstrate ultralow-power single soliton formation in high-Q ($Q_0>15\times10^6$) Si$_3$N$_4$ microresonators with 9.8 mW input power (6.2 mW in the waveguide) for devices of electronically detectable, 99 GHz repetition rate. We show that solitons can be accessed via simple, slow laser piezo tuning, in many resonances in the same sample. These power levels are compatible with current silicon-photonics-based lasers for full photonic integration of soliton microcombs, at repetition rates suitable for applications such as ultrafast ranging and coherent communication. Our results show the technological readiness of Si$_3$N$_4$ optical waveguides for future all-on-chip soliton microcomb devices.
△ Less
Submitted 4 October, 2018; v1 submitted 30 April, 2018;
originally announced May 2018.
-
GPU-Accelerated Simulations of Isolated Black Holes
Authors:
Adam G. M. Lewis,
Harald P. Pfeiffer
Abstract:
We present a port of the numerical relativity code SpEC which is capable of running on NVIDIA GPUs. Since this code must be maintained in parallel with SpEC itself, a primary design consideration is to perform as few explicit code changes as possible. We therefore rely on a hierarchy of automated porting strategies. At the highest level we use TLoops, a C++ library of our design, to automatically…
▽ More
We present a port of the numerical relativity code SpEC which is capable of running on NVIDIA GPUs. Since this code must be maintained in parallel with SpEC itself, a primary design consideration is to perform as few explicit code changes as possible. We therefore rely on a hierarchy of automated porting strategies. At the highest level we use TLoops, a C++ library of our design, to automatically emit CUDA code equivalent to tensorial expressions written into C++ source using a syntax similar to analytic calculation. Next, we trace out and cache explicit matrix representations of the numerous linear transformations in the SpEC code, which allows these to be performed on the GPU using pre-existing matrix-multiplication libraries. We port the few remaining important modules by hand. In this paper we detail the specifics of our port, and present benchmarks of it simulating isolated black hole spacetimes on several generations of NVIDIA GPU.
△ Less
Submitted 24 April, 2018;
originally announced April 2018.
-
Double inverse nanotapers for efficient light coupling to integrated photonic devices
Authors:
Junqiu Liu,
Arslan S. Raja,
Martin H. P. Pfeiffer,
Clemens Herkommer,
Hairun Guo,
Michael Zervas,
Michael Geiselmann,
Tobias J. Kippenberg
Abstract:
Efficient light coupling into integrated photonic devices is of key importance to a wide variety of applications. "Inverse nanotapers" are widely used, in which the waveguide width is reduced to match an incident mode. Here, we demonstrate novel, "double inverse" tapers, in which we taper both the waveguide height, as well as the width. We demonstrate that in comparison to regular inverse tapers,…
▽ More
Efficient light coupling into integrated photonic devices is of key importance to a wide variety of applications. "Inverse nanotapers" are widely used, in which the waveguide width is reduced to match an incident mode. Here, we demonstrate novel, "double inverse" tapers, in which we taper both the waveguide height, as well as the width. We demonstrate that in comparison to regular inverse tapers, the double inverse tapers have excellent polarization-independent coupling. In addition, the optimum coupling is achieved with much larger taper dimension, enabling the use of photolithography instead of electron beam lithography, relevant for applications at near-IR and visible wavelengths. The low coupling loss makes them particularly suitable for nonlinear photonics, e.g. supercontinuum and soliton micro-comb generation.
△ Less
Submitted 23 February, 2018;
originally announced March 2018.
-
Probing the loss origins of ultra-smooth $\mathrm{Si_3N_4}$ integrated photonic waveguides
Authors:
Martin H. P. Pfeiffer,
Junqiu Liu,
Arslan S. Raja,
Tiago Morais,
Bahareh Ghadiani,
Tobias J. Kippenberg
Abstract:
On-chip optical waveguides with low propagation losses and precisely engineered group velocity dispersion (GVD) are important to nonlinear photonic devices such as soliton microcombs. Yet, despite intensive research efforts, nonlinear integrated photonic platforms still feature propagation losses orders of magnitude higher than in standard optical fiber. The tight confinement and high index contra…
▽ More
On-chip optical waveguides with low propagation losses and precisely engineered group velocity dispersion (GVD) are important to nonlinear photonic devices such as soliton microcombs. Yet, despite intensive research efforts, nonlinear integrated photonic platforms still feature propagation losses orders of magnitude higher than in standard optical fiber. The tight confinement and high index contrast of integrated waveguides make them highly susceptible to fabrication induced surface roughness. Therefore, microresonators with ultra-high Q factors are, to date, only attainable in polished bulk crystalline, or chemically etched silica based devices, that pose however challenges for full photonic integration. Here, we demonstrate the fabrication of silicon nitride ($\mathrm{Si_3N_4}$) waveguides with unprecedentedly smooth sidewalls and tight confinement with record low propagation losses. This is achieved by combining the photonic Damascene process with a novel reflow process, which reduces etching roughness, while sufficiently preserving dimensional accuracy. This leads to previously unattainable \emph{mean} microresonator Q factors larger than $5\times10^6$ for tightly confining waveguides with anomalous dispersion. Via systematic process step variation and two independent characterization techniques we differentiate the scattering and absorption loss contributions, and reveal metal impurity related absorption to be an important loss origin. Although such impurities are known to limit optical fibers, this is the first time they are identified, and play a tangible role, in absorption of integrated microresonators. Taken together, our work provides new insights in the origins of propagation losses in $\mathrm{Si_3N_4}$ waveguides and provides the technological basis for integrated nonlinear photonics in the ultra-high Q regime.
△ Less
Submitted 12 February, 2018;
originally announced February 2018.
-
An Integrated-Photonics Optical-Frequency Synthesizer
Authors:
Daryl T. Spencer,
Tara Drake,
Travis C. Briles,
Jordan Stone,
Laura C. Sinclair,
Connor Fredrick,
Qing Li,
Daron Westly,
B. Robert Ilic,
Aaron Bluestone,
Nicolas Volet,
Tin Komljenovic,
Lin Chang,
Seung Hoon Lee,
Dong Yoon Oh,
Myoung-Gyun Suh,
Ki Youl Yang,
Martin H. P. Pfeiffer,
Tobias J. Kippenberg,
Erik Norberg,
Luke Theogarajan,
Kerry Vahala,
Nathan R. Newbury,
Kartik Srinivasan,
John E. Bowers
, et al. (2 additional authors not shown)
Abstract:
Integrated-photonics microchips now enable a range of advanced functionalities for high-coherence applications such as data transmission, highly optimized physical sensors, and harnessing quantum states, but with cost, efficiency, and portability much beyond tabletop experiments. Through high-volume semiconductor processing built around advanced materials there exists an opportunity for integrated…
▽ More
Integrated-photonics microchips now enable a range of advanced functionalities for high-coherence applications such as data transmission, highly optimized physical sensors, and harnessing quantum states, but with cost, efficiency, and portability much beyond tabletop experiments. Through high-volume semiconductor processing built around advanced materials there exists an opportunity for integrated devices to impact applications cutting across disciplines of basic science and technology. Here we show how to synthesize the absolute frequency of a lightwave signal, using integrated photonics to implement lasers, system interconnects, and nonlinear frequency comb generation. The laser frequency output of our synthesizer is programmed by a microwave clock across 4 THz near 1550 nm with 1 Hz resolution and traceability to the SI second. This is accomplished with a heterogeneously integrated III/V-Si tunable laser, which is guided by dual dissipative-Kerr-soliton frequency combs fabricated on silicon chips. Through out-of-loop measurements of the phase-coherent, microwave-to-optical link, we verify that the fractional-frequency instability of the integrated photonics synthesizer matches the $7.0*10^{-13}$ reference-clock instability for a 1 second acquisition, and constrain any synthesis error to $7.7*10^{-15}$ while stepping the synthesizer across the telecommunication C band. Any application of an optical frequency source would be enabled by the precision optical synthesis presented here. Building on the ubiquitous capability in the microwave domain, our results demonstrate a first path to synthesis with integrated photonics, leveraging low-cost, low-power, and compact features that will be critical for its widespread use.
△ Less
Submitted 15 August, 2017;
originally announced August 2017.
-
Ultrafast optical ranging using microresonator soliton frequency combs
Authors:
Philipp Trocha,
Denis Ganin,
Maxim Karpov,
Martin H. P. Pfeiffer,
Arne Kordts,
Jonas Krockenberger,
Stefan Wolf,
Pablo Marin-Palomo,
Claudius Weimann,
Sebastian Randel,
Wolfgang Freude,
Tobias J. Kippenberg,
Christian Koos
Abstract:
Light detection and ranging (LIDAR) is critical to many fields in science and industry. Over the last decade, optical frequency combs were shown to offer unique advantages in optical ranging, in particular when it comes to fast distance acquisition with high accuracy. However, current comb-based concepts are not suited for emerging high-volume applications such as drone navigation or autonomous dr…
▽ More
Light detection and ranging (LIDAR) is critical to many fields in science and industry. Over the last decade, optical frequency combs were shown to offer unique advantages in optical ranging, in particular when it comes to fast distance acquisition with high accuracy. However, current comb-based concepts are not suited for emerging high-volume applications such as drone navigation or autonomous driving. These applications critically rely on LIDAR systems that are not only accurate and fast, but also compact, robust, and amenable to cost-efficient mass-production. Here we show that integrated dissipative Kerr-soliton (DKS) comb sources provide a route to chip-scale LIDAR systems that combine sub-wavelength accuracy and unprecedented acquisition speed with the opportunity to exploit advanced photonic integration concepts for wafer-scale mass production. In our experiments, we use a pair of free-running DKS combs, each providing more than 100 carriers for massively parallel synthetic-wavelength interferometry. We demonstrate dual-comb distance measurements with record-low Allan deviations down to 12 nm at averaging times of 14 $μ$s as well as ultrafast ranging at unprecedented measurement rates of up to 100 MHz. We prove the viability of our technique by sampling the naturally scattering surface of air-gun projectiles flying at 150 m/s (Mach 0.47). Combining integrated dual-comb LIDAR engines with chip-scale nanophotonic phased arrays, the approach could allow widespread use of compact ultrafast ranging systems in emerging mass applications.
△ Less
Submitted 20 July, 2017; v1 submitted 19 July, 2017;
originally announced July 2017.
-
Photonic chip-based soliton frequency combs covering the biological imaging window
Authors:
Maxim Karpov,
Martin H. P. Pfeiffer,
Tobias J. Kippenberg
Abstract:
Dissipative Kerr solitons (DKS) in optical microresonators provide a highly miniaturized, chip-scale frequency comb source with unprecedentedly high repetition rates and spectral bandwidth. To date, such soliton frequency comb sources have been successfully applied in the optical telecommunication band for dual comb spectroscopy, coherent telecommunications, counting of optical frequencies and dis…
▽ More
Dissipative Kerr solitons (DKS) in optical microresonators provide a highly miniaturized, chip-scale frequency comb source with unprecedentedly high repetition rates and spectral bandwidth. To date, such soliton frequency comb sources have been successfully applied in the optical telecommunication band for dual comb spectroscopy, coherent telecommunications, counting of optical frequencies and distance measurements. Yet the range of applications could be significantly extended by operating in the near-infrared spectral domain, a prerequisite for biomedical and Raman imaging applications, and a part of the spectrum which hosts commonly used optical atomic transitions. Here we demonstrate the operation of photonic chip-based soliton Kerr combs pumped with 1 micron laser light. By engineering the dispersion properties of a $\rm Si_3N_4$ microring resonator, octave-spanning soliton Kerr combs extending to 776 nm are attained, thereby covering the optical biological imaging window. Moreover, we demonstrate that soliton states can be generated in normal group velocity dispersion regions, when exploiting mode hybridization with other mode families. The reported near-infrared soliton Kerr combs are suitable for a range of studies, including frequency-comb-based optical coherence tomography, coherent anti-Stokes Raman spectro-imaging, and they spectrally overlap with optical atomic transitions in Alkali vapors.
△ Less
Submitted 20 June, 2017;
originally announced June 2017.
-
Orthogonally Polarized Kerr Frequency Combs
Authors:
Changjing Bao,
Peicheng Liao,
Arne Kordts,
Lin Zhang,
Andrey Matsko,
Maxim Karpov,
Martin H. P. Pfeiffer,
Guodong Xie,
Yinwen Cao,
Yan Yan,
Ahmed Almaiman,
Zhe Zhao,
Amirhossein Mohajerin-Ariaei,
Ahmad Fallahpour,
Fatemeh Alishahi,
Moshe Tur,
Lute Maleki,
Tobias J. Kippenberg,
Alan E. Willner
Abstract:
Kerr optical frequency combs with multi-gigahertz spacing have previously been demonstrated in chip-scale microresonators, with potential applications in coherent communication, spectroscopy, arbitrary waveform generation, and radio frequency photonic oscillators. In general, the harmonics of a frequency comb are identically polarized in a single microresonator. In this work, we report that one co…
▽ More
Kerr optical frequency combs with multi-gigahertz spacing have previously been demonstrated in chip-scale microresonators, with potential applications in coherent communication, spectroscopy, arbitrary waveform generation, and radio frequency photonic oscillators. In general, the harmonics of a frequency comb are identically polarized in a single microresonator. In this work, we report that one comb in one polarization is generated by an orthogonally polarized soliton comb and two low-noise, orthogonally polarized combs interact with each other and exist simultaneously in a single microresonator. The second comb generation is attributed to the strong cross-phase modulation with the orthogonally polarized soliton comb and the high peak power of the intracavity soliton pulse. Experimental results show that a second frequency comb is excited even when a continuous wave light as a "seed"-with power as low as 0.1 mW-is input, while its own power level is below the threshold of comb generation. Moreover, the second comb has a concave envelope, which is different from the sech2 envelope of the soliton comb. This is due to the frequency mismatch between the harmonics and the resonant frequency. We also find that the repetition rates of these two combs coincide, although two orthogonal resonant modes are characterized by different free spectral ranges.
△ Less
Submitted 21 June, 2017; v1 submitted 14 May, 2017;
originally announced May 2017.
-
Inter-mode breather solitons in optical microresonators
Authors:
Hairun Guo,
Erwan Lucas,
Martin H. P. Pfeiffer,
Maxim Karpov,
Miles Anderson,
Junqiu Liu,
Michael Geiselmann,
John D. Jost,
Tobias J. Kippenberg
Abstract:
The observation of temporal dissipative Kerr solitons in optical microresonators provides, on the applied side, compact sources of coherent optical frequency combs that have already been applied in coherent communications, dual comb spectroscopy and metrology. On a fundamental level, it enables the study of soliton physics in driven nonlinear cavities. Microresonators are commonly multimode and, a…
▽ More
The observation of temporal dissipative Kerr solitons in optical microresonators provides, on the applied side, compact sources of coherent optical frequency combs that have already been applied in coherent communications, dual comb spectroscopy and metrology. On a fundamental level, it enables the study of soliton physics in driven nonlinear cavities. Microresonators are commonly multimode and, as a result, inter-mode interactions inherently occur among mode families - a condition referred to as "avoided mode crossings". Avoided mode crossings can cause soliton decay, but can also modify the soliton spectrum, leading to e.g. the formation of dispersive wave and inducing a spectral recoil. Yet, to date, the entailing temporal soliton dynamics from inter-mode interactions has rarely been studied, but is critical to understand regimes of soliton-stability. Here we report the discovery of an inter-mode breather soliton. Such breathing dynamics occurs within a laser detuning range where conventionally stationary dissipative solitons are expected. We demonstrate experimentally the phenomenon in two microresonator platforms (crystalline magnesium fluoride and photonic chip-based silicon nitride microresonators), and theoretically describe the dynamics based on a pair of coupled Lugiato-Lefever equations. We demonstrate experimentally that the breathing is associated with a periodic energy exchange between the soliton and another optical mode family. We further show that inter-mode interactions can be modeled by a response function acting on dissipative solitons. The observation of breathing dynamics in the conventionally stable soliton regime is critical to applications, ranging from low-noise microwave generation, frequency synthesis to spectroscopy. On a fundamental level, our results provide new understandings of the rich dissipative soliton dynamics in multimode nonlinear cavities.
△ Less
Submitted 14 May, 2017;
originally announced May 2017.
-
Mid-infrared frequency comb generation with silicon nitride nano-photonic waveguides
Authors:
Clemens Herkommer,
Adrien Billat,
Hairun Guo,
Davide Grassani,
Chuankun Zhang,
Martin H. P. Pfeiffer,
Camille-Sophie Bres,
Tobias J. Kippenberg
Abstract:
Mid-infrared optical frequency combs are of significant interest for molecular spectroscopy due to the large absorption of molecular vibrational modes on one hand, and the ability to implement superior comb-based spectroscopic modalities with increased speed, sensitivity and precision on the other hand. Substantial advances in mid-infrared frequency comb generation have been made in recent years b…
▽ More
Mid-infrared optical frequency combs are of significant interest for molecular spectroscopy due to the large absorption of molecular vibrational modes on one hand, and the ability to implement superior comb-based spectroscopic modalities with increased speed, sensitivity and precision on the other hand. Substantial advances in mid-infrared frequency comb generation have been made in recent years based on nonlinear frequency conversion, microresonator Kerr frequency combs, quantum cascade lasers and mode locking regimes. Here we demonstrate a simple, yet effective method for the direct generation of mid-infrared optical frequency combs in the region from ${2.5-4~μ{\rm m}}$, i.e. ${2500-4000~{\rm cm}^{-1}}$ covering a large fraction of the functional group region, directly from a conventional and compact erbium-fiber-based femtosecond laser in the telecommunication band (i.e. ${1.55~μ{\rm m}}$). The wavelength conversion is based on dispersive wave generation within the supercontinuum process in large-cross-section and dispersion-engineered silicon nitride (${\rm Si_3N_4}$) waveguides. The long-wavelength dispersive wave, with its position lithographically determined, performs as a mid-infrared frequency comb, whose coherence is demonstrated via optical heterodyne measurements. Such a simple and versatile approach to mid-infrared frequency comb generation is suitable for spectroscopic applications in the first mid-infrared atmospheric window. Moreover, the compactness and simplicity of the approach have the potential to realize compact dual-comb spectrometers. The generated combs have a fine teeth-spacing, making them also suitable for gas phase analysis.
△ Less
Submitted 18 June, 2017; v1 submitted 8 April, 2017;
originally announced April 2017.
-
Octave-spanning dissipative Kerr soliton frequency combs in $Si_3N_4$ microresonators
Authors:
Martin H. P. Pfeiffer,
Clemens Herkommer,
Junqiu Liu,
Hairun Guo,
Maxim Karpov,
Erwan Lucas,
Michael Zervas,
Tobias J. Kippenberg
Abstract:
Octave-spanning, self-referenced frequency combs are applied in diverse fields ranging from precision metrology to astrophysical spectrometer calibration. In the past decade, Kerr frequency comb generators have emerged as alternative scheme offering chip-scale integration, high repetition rate and bandwidths that are only limited by group velocity dispersion. The recent observation of Kerr frequen…
▽ More
Octave-spanning, self-referenced frequency combs are applied in diverse fields ranging from precision metrology to astrophysical spectrometer calibration. In the past decade, Kerr frequency comb generators have emerged as alternative scheme offering chip-scale integration, high repetition rate and bandwidths that are only limited by group velocity dispersion. The recent observation of Kerr frequency combs operating in the dissipative Kerr soliton (DKS) regime, along with dispersive wave formation, has provided the means for fully coherent, broadband Kerr frequency comb generation with engineered spectral envelope. Here, by carefully optimizing the photonic Damascene fabrication process, and dispersion engineering of $\mathrm{Si_{3}N_{4}}$ microresonators with $1\,\mathrm{THz}$ free spectral range, we achieve bandwidths exceeding one octave at low powers ($\mathcal{O}(100\,\mathrm{mW})$) for pump lasers residing in the telecom C-band ($1.55\,\mathrm{μm}$), as well as for the first time in the O-band ($1.3\,\mathrm{μm}$). Equally important, we find that for THz repetition rate comb states, conventional criteria applied to identify DKS comb states fail. Investigating the coherence of generated, octave-spanning Kerr comb states we unambiguously identify DKS states using a response measurement. This allows to demonstrate octave-spanning DKS comb states at both pump laser wavelengths of $1.3\mathrm{\,μm}$ and $1.55\,\mathrm{μm}$ including the broadest DKS state generated to date, spanning more than $200\,\mathrm{THz}$ of optical bandwidth. Octave spanning DKS frequency combs can form essential building blocks for metrology or spectroscopy, and their operation at $1.3\mathrm{\,μm}$ enables applications in life sciences such as Kerr comb based optical coherence tomography or dual comb coherent antistokes Raman scattering.
△ Less
Submitted 28 February, 2017; v1 submitted 30 January, 2017;
originally announced January 2017.
-
Large second harmonic generation enhancement in SiN waveguides by all-optically induced quasi phase matching
Authors:
Adrien Billat,
Davide Grassani,
Martin H. P. Pfeiffer,
Svyatoslav Kharitonov,
Tobias J. Kippenberg,
Camille-Sophie Brès
Abstract:
Integrated waveguides exhibiting efficient second-order nonlinearities are crucial to obtain compact and low power optical signal processing devices. Silicon nitride (SiN) has shown second harmonic generation (SHG) capabilities in resonant structures and single-pass devices leveraging intermodal phase matching, which is defined by waveguide design. Lithium niobate allows compensating for the phase…
▽ More
Integrated waveguides exhibiting efficient second-order nonlinearities are crucial to obtain compact and low power optical signal processing devices. Silicon nitride (SiN) has shown second harmonic generation (SHG) capabilities in resonant structures and single-pass devices leveraging intermodal phase matching, which is defined by waveguide design. Lithium niobate allows compensating for the phase mismatch using periodically poled waveguides, however the latter are not reconfigurable and remain difficult to integrate with SiN or silicon (Si) circuits. Here we show the all-optical enhancement of SHG in SiN waveguides by more than 30 dB. We demonstrate that a Watt-level laser causes a periodic modification of the waveguide second-order susceptibility. The resulting second order nonlinear grating has a periodicity allowing for quasi phase matching (QPM) between the pump and SH mode. Moreover, changing the pump wavelength or polarization updates the period, relaxing phase matching constraints imposed by the waveguide geometry. We show that the grating is long term inscribed in the waveguides, and we estimate a second order nonlinearity of the order of 0.3 pm/V, while a maximum conversion efficiency (CE) of 1.8x10-6 W-1 cm-2 is reached.
△ Less
Submitted 11 January, 2017;
originally announced January 2017.
-
Microresonator solitons for massively parallel coherent optical communications
Authors:
Pablo Marin-Palomo,
Juned N. Kemal,
Maxim Karpov,
Arne Kordts,
Joerg Pfeifle,
Martin H. P. Pfeiffer,
Philipp Trocha,
Stefan Wolf,
Victor Brasch,
Miles H. Anderson,
Ralf Rosenberger,
Kovendhan Vijayan,
Wolfgang Freude,
Tobias J. Kippenberg,
Christian Koos
Abstract:
Optical solitons are waveforms that preserve their shape while propagating, relying on a balance of dispersion and nonlinearity. Soliton-based data transmission schemes were investigated in the 1980s, promising to overcome the limitations imposed by dispersion of optical fibers. These approaches, however, were eventually abandoned in favor of wavelength-division multiplexing (WDM) schemes that are…
▽ More
Optical solitons are waveforms that preserve their shape while propagating, relying on a balance of dispersion and nonlinearity. Soliton-based data transmission schemes were investigated in the 1980s, promising to overcome the limitations imposed by dispersion of optical fibers. These approaches, however, were eventually abandoned in favor of wavelength-division multiplexing (WDM) schemes that are easier to implement and offer improved scalability to higher data rates. Here, we show that solitons may experience a comeback in optical communications, this time not as a competitor, but as a key element of massively parallel WDM. Instead of encoding data on the soliton itself, we exploit continuously circulating dissipative Kerr solitons (DKS) in a microresonator. DKS are generated in an integrated silicon nitride microresonator by four-photon interactions mediated by Kerr nonlinearity, leading to low-noise, spectrally smooth and broadband optical frequency combs. In our experiments, we use two interleaved soliton Kerr combs to transmit a data stream of more than 50Tbit/s on a total of 179 individual optical carriers that span the entire telecommunication C and L bands. Equally important, we demonstrate coherent detection of a WDM data stream by using a pair of microresonator Kerr soliton combs - one as a multi-wavelength light source at the transmitter, and another one as a corresponding local oscillator (LO) at the receiver. This approach exploits the scalability advantages of microresonator soliton comb sources for massively parallel optical communications both at the transmitter and receiver side. Taken together, the results prove the significant potential of these sources to replace arrays of continuous-wave lasers in high-speed communications.
△ Less
Submitted 17 April, 2017; v1 submitted 5 October, 2016;
originally announced October 2016.
-
Coupling ideality of integrated planar high-Q microresonators
Authors:
Martin H. P. Pfeiffer,
Junqiu Liu,
Michael Geiselmann,
Tobias J. Kippenberg
Abstract:
Chipscale microresonators with integrated planar optical waveguides are useful building blocks for linear, nonlinear and quantum optical devices. Loss reduction through improving fabrication processes has resulted in several integrated micro resonator platforms attaining quality (Q) factors of several millions. However only few studies have investigated design-dependent losses, especially with reg…
▽ More
Chipscale microresonators with integrated planar optical waveguides are useful building blocks for linear, nonlinear and quantum optical devices. Loss reduction through improving fabrication processes has resulted in several integrated micro resonator platforms attaining quality (Q) factors of several millions. However only few studies have investigated design-dependent losses, especially with regard to the resonator coupling section. Here we investigate design-dependent parasitic losses, described by the coupling ideality, of the commonly employed microresonator design consisting of a microring resonator waveguide side-coupled to a straight bus waveguide. By systematic characterization of multi-mode high-Q silicon nitride microresonator devices, we show that this design can suffer from low coupling ideality. By performing full 3D simulations to numerically investigate the resonator to bus waveguide coupling, we identify the coupling to higher-order bus waveguide modes as the dominant origin of parasitic losses which lead to the low coupling ideality. Using suitably designed bus waveguides, parasitic losses are mitigated, and a nearly unity ideality and strong overcoupling (i.e. a ratio of external coupling to internal resonator loss rate > 9) are demonstrated. Moreover we find that different resonator modes can exchange power through the coupler, which therefore constitutes a mechanism that induces modal coupling, a phenomenon known to distort resonator dispersion properties. Our results demonstrate the potential for significant performance improvements of integrated planar microresonators, achievable by optimized coupler designs.
△ Less
Submitted 23 August, 2016;
originally announced August 2016.
-
Bringing short-lived dissipative Kerr soliton states in microresonators into a steady state
Authors:
Victor Brasch,
Michael Geiselmann,
Martin H. P. Pfeiffer,
Tobias J. Kippenberg
Abstract:
Dissipative Kerr solitons have recently been generated in optical microresonators, enabling ultrashort optical pulses at microwave repetition rates, that constitute coherent and numerically predictable Kerr frequency combs. However, the seeding and excitation of the temporal solitons is associated with changes in the intracavity power, that can lead to large thermal resonance shifts during the exc…
▽ More
Dissipative Kerr solitons have recently been generated in optical microresonators, enabling ultrashort optical pulses at microwave repetition rates, that constitute coherent and numerically predictable Kerr frequency combs. However, the seeding and excitation of the temporal solitons is associated with changes in the intracavity power, that can lead to large thermal resonance shifts during the excitation process and render the soliton states in most commonly used resonator platforms short lived. Here we describe a "power kicking" method to overcome this instability by modulating the power of the pump laser. A fast modulation triggers the soliton formation, while a slow adjustment of the power compensates the thermal effect during the excitation laser scan. With this method also initially very short-lived (100ns) soliton states , as encountered in SiN integrated photonic microresonators, can be brought into a steady state in contrast to techniques reported earlier which relied on an adjustment of the laser scan speed only. Once the soliton state is in a steady state it can persist for hours and is thermally self-locked.
△ Less
Submitted 25 July, 2016;
originally announced July 2016.
-
Frequency Comb Assisted Broadband Precision Spectroscopy with Cascaded Diode Lasers
Authors:
Junqiu Liu,
Victor Brasch,
Martin H. P. Pfeiffer,
Arne Kordts,
Ayman N. Kamel,
Hairun Guo,
Michael Geiselmann,
Tobias J. Kippenberg
Abstract:
Frequency comb assisted diode laser spectroscopy, employing both the accuracy of an optical frequency comb and the broad wavelength tuning range of a tunable diode laser, has been widely used in many applications. In this letter we present a novel method using cascaded frequency agile diode lasers, which allows extending the measurement bandwidth to 37.4 THz (1355 to 1630 nm) at MHz resolution wit…
▽ More
Frequency comb assisted diode laser spectroscopy, employing both the accuracy of an optical frequency comb and the broad wavelength tuning range of a tunable diode laser, has been widely used in many applications. In this letter we present a novel method using cascaded frequency agile diode lasers, which allows extending the measurement bandwidth to 37.4 THz (1355 to 1630 nm) at MHz resolution with scanning speeds above 1 THz/s. It is demonstrated as a useful tool to characterize a broadband spectrum for molecular spectroscopy and in particular it enables to characterize the dispersion of integrated microresonators up to the fourth order.
△ Less
Submitted 18 April, 2016;
originally announced April 2016.
-
Universal dynamics and controlled switching of dissipative Kerr solitons in optical microresonators
Authors:
M. Karpov,
H. Guo,
E. Lucas,
A. Kordts,
M. H. P. Pfeiffer,
G. Lichachev,
V. E. Lobanov,
M. L. Gorodetsky,
T. J. Kippenberg
Abstract:
Dissipative temporal Kerr solitons in optical microresonators enable to convert a continuous wave laser into a train of femtosecond pulses. Of particular interest are single soliton states, whose $\mathrm{sech}^{2}$ spectral envelope provides a spectrally smooth and low noise optical frequency comb, and that recently have been generated in crystalline, silica, and silicon-nitride resonators. Here,…
▽ More
Dissipative temporal Kerr solitons in optical microresonators enable to convert a continuous wave laser into a train of femtosecond pulses. Of particular interest are single soliton states, whose $\mathrm{sech}^{2}$ spectral envelope provides a spectrally smooth and low noise optical frequency comb, and that recently have been generated in crystalline, silica, and silicon-nitride resonators. Here, we study the dynamics of multiple soliton states containing ${N}$ solitons and report the discovery of a novel, yet simple mechanism which makes it possible to reduce deterministically the number of solitons, one by one, i.e. ${N\! \to\! N\!-\!1\! \to\! \dots \!\to\! 1}$. By applying weak phase modulation, we directly characterize the soliton state via a double-resonance response. The dynamical probing demonstrates that transitions occur in a predictable way, and thereby enables us to map experimentally the underlying multi-stability diagram of dissipative Kerr solitons. These measurements reveal the "lifted" degeneracy of soliton states as a result of the power-dependent thermal shift of the cavity resonance (i.e. the thermal nonlinearity). The experimental results are in agreement with theoretical and numerical analysis that incorporate the thermal nonlinearity. By studying two different microresonator platforms (integrated $\mathrm{Si_{3}N_{4}}$ microresonators and crystalline $\mathrm{MgF_{2}}$ resonators) we confirm that these effects have a universal nature. Beyond elucidating the fundamental dynamical properties of dissipative Kerr solitons the observed phenomena are also of practical relevance, providing a manipulation toolbox which enables to sequentially reduce, monitor and stabilize the number ${N}$ of solitons, preventing it from decay. Achieving reliable single soliton operation and stabilization in this manner in optical resonators is imperative to applications.
△ Less
Submitted 19 January, 2016;
originally announced January 2016.
-
Photonic Damascene Process for Integrated High-Q Microresonator Based Nonlinear Photonics
Authors:
Martin H. P. Pfeiffer,
Arne Kordts,
Victor Brasch,
Michael Zervas,
Michael Geiselmann,
John D. Jost,
Tobias J. Kippenberg
Abstract:
High confinement, integrated silicon nitride (SiN) waveguides have recently emerged as attractive platform for on-chip nonlinear optical devices. The fabrication of high-Q SiN microresonators with anomalous group velocity dispersion (GVD) has enabled broadband nonlinear optical frequency comb generation. Such frequency combs have been successfully applied in coherent communication and ultrashort p…
▽ More
High confinement, integrated silicon nitride (SiN) waveguides have recently emerged as attractive platform for on-chip nonlinear optical devices. The fabrication of high-Q SiN microresonators with anomalous group velocity dispersion (GVD) has enabled broadband nonlinear optical frequency comb generation. Such frequency combs have been successfully applied in coherent communication and ultrashort pulse generation. However, the reliable fabrication of high confinement waveguides from stoichiometric, high stress SiN remains challenging. Here we present a novel photonic Damascene fabrication process enabling the use of substrate topography for stress control and thin film crack prevention. With close to unity sample yield we fabricate microresonators with $1.35\,μ\mathrm{m}$ thick waveguides and optical Q factors of $3.7\times10^{6}$ and demonstrate single temporal dissipative Kerr soliton (DKS) based coherent optical frequency comb generation. Our newly developed process is interesting also for other material platforms, photonic integration and mid infrared Kerr comb generation.
△ Less
Submitted 18 November, 2015;
originally announced November 2015.
-
All Optical Stabilization of a Soliton Frequency Comb in a Crystalline Microresonator
Authors:
J. D. Jost,
E. Lucas,
T. Herr,
C. Lecaplain,
V. Brasch,
M. H. P. Pfeiffer,
T. J. Kippenberg
Abstract:
Microresonator based optical frequency combs (MFC) have demonstrated promise in extending the capabilities of optical frequency combs. Here we demonstrate all optical stabilization of a low noise temporal soliton based MFC in a crystalline resonator via a new technique to control the repetition rate. This is accomplished by thermally heating the microresonator with an additional probe laser couple…
▽ More
Microresonator based optical frequency combs (MFC) have demonstrated promise in extending the capabilities of optical frequency combs. Here we demonstrate all optical stabilization of a low noise temporal soliton based MFC in a crystalline resonator via a new technique to control the repetition rate. This is accomplished by thermally heating the microresonator with an additional probe laser coupled to an auxiliary optical resonator mode. The offset frequency is controlled by stabilization of the pump laser frequency to a reference optical frequency comb. We analyze the stabilization by performing an out of loop comparison and measure the overlapping Allan deviation. This all optical stabilization technique can prove useful as a low added noise actuator for self-referenced microresonator frequency combs.
△ Less
Submitted 6 August, 2015;
originally announced August 2015.
-
Counting the Cycles of Light using a Self-Referenced Optical Microresonator
Authors:
J. D. Jost,
T. Herr,
C. Lecaplain,
V. Brasch,
M. H. P. Pfeiffer,
T. J. Kippenberg
Abstract:
Phase coherently linking optical to radio frequencies with femtosecond mode-locked laser frequency combs enabled counting the cycles of light and is the basis of optical clocks, absolute frequency synthesis, tests of fundamental physics, and improved spectroscopy. Using an optical microresonator frequency comb to establish a coherent link between optical and microwave frequencies will extend optic…
▽ More
Phase coherently linking optical to radio frequencies with femtosecond mode-locked laser frequency combs enabled counting the cycles of light and is the basis of optical clocks, absolute frequency synthesis, tests of fundamental physics, and improved spectroscopy. Using an optical microresonator frequency comb to establish a coherent link between optical and microwave frequencies will extend optical frequency synthesis and measurements to areas requiring compact form factor, on chip integration and comb line spacing in the microwave regime, including coherent telecommunications, astrophysical spectrometer calibration or microwave photonics. Here we demonstrate a microwave to optical link with a microresonator. Using a temporal dissipative single soliton state in an ultra-high Q crystalline microresonator that is broadened in highly nonlinear fiber an optical frequency comb is generated that is self-referenced, allowing to phase coherently link a 190 THz optical carrier directly to a 14 GHz microwave frequency. Our work demonstrates precision optical frequency measurements can be realized with compact high Q microresonators.
△ Less
Submitted 6 August, 2015; v1 submitted 5 November, 2014;
originally announced November 2014.
-
Photonic chip based optical frequency comb using soliton induced Cherenkov radiation
Authors:
Victor Brasch,
Tobias Herr,
Michael Geiselmann,
Grigoriy Lihachev,
Martin H. P. Pfeiffer,
Michael L. Gorodetsky,
Tobias J. Kippenberg
Abstract:
By continuous wave pumping of a dispersion engineered, planar silicon nitride microresonator, continuously circulating, sub-30fs short temporal dissipative solitons are generated, that correspond to pulses of 6 optical cycles and constitute a coherent optical frequency comb in the spectral domain. Emission of soliton induced Cherenkov radiation caused by higher order dispersion broadens the spectr…
▽ More
By continuous wave pumping of a dispersion engineered, planar silicon nitride microresonator, continuously circulating, sub-30fs short temporal dissipative solitons are generated, that correspond to pulses of 6 optical cycles and constitute a coherent optical frequency comb in the spectral domain. Emission of soliton induced Cherenkov radiation caused by higher order dispersion broadens the spectral bandwidth to 2/3 of an octave, sufficient for self referencing, in excellent agreement with recent theoretical predictions and the broadest coherent microresonator frequency comb generated to date. In a further step, this frequency comb is fully phase stabilized. The ability to preserve coherence over a broad spectral bandwidth using soliton induced Cherenkov radiation marks a critical milestone in the development of planar optical frequency combs, enabling on one hand application in e.g. coherent communications, broadband dual comb spectroscopy and Raman spectral imaging, while on the other hand significantly relaxing dispersion requirements for broadband microresonator frequency combs and providing a path for their generation in the visible and UV. Our results underscore the utility and effectiveness of planar microresonator frequency comb technology, that offers the potential to make frequency metrology accessible beyond specialized laboratories.
△ Less
Submitted 8 September, 2015; v1 submitted 30 October, 2014;
originally announced October 2014.
-
Electroluminescence from chirality-sorted (9,7)-semiconducting carbon nanotube devices
Authors:
Martin H. P. Pfeiffer,
Ninette Stürzl,
Christoph W. Marquardt,
Michael Engel,
Simone Dehm,
Frank Hennrich,
Manfred M. Kappes,
Uli Lemmer,
Ralph Krupke
Abstract:
We have measured the electroluminescence and photoluminescence of (9,7) semiconducting carbon nanotube devices and demonstrate that the electroluminescence wavelength is determined by the nanotube's chiral index (n,m). The devices were fabricated on Si3N4 membranes by dielectrophoretic assembly of tubes from monochiral dispersion. Electrically driven (9,7) devices exhibit a single Lorentzian shape…
▽ More
We have measured the electroluminescence and photoluminescence of (9,7) semiconducting carbon nanotube devices and demonstrate that the electroluminescence wavelength is determined by the nanotube's chiral index (n,m). The devices were fabricated on Si3N4 membranes by dielectrophoretic assembly of tubes from monochiral dispersion. Electrically driven (9,7) devices exhibit a single Lorentzian shaped emission peak at 825 nm in the visible part of the spectrum. The emission could be assigned to the excitonic E22 interband transition by comparison of the electroluminescence spectra with corresponding photoluminescence excitation maps. We show a linear dependence of the EL peak width on the electrical current, and provide evidence for the inertness of Si3N4 surfaces with respect to the nanotubes optical properties.
△ Less
Submitted 27 July, 2011;
originally announced July 2011.
