-
A unified model of feed rotation in radio telescopes and GNSS antennas
Authors:
Joe Skeens,
Johnathan York,
Leonid Petrov,
Kyle Herrity,
Richard Ji-Cathriner,
Srinivas Bettadpur
Abstract:
We describe a model that accounts for the phase rotation that occurs when a receiver or transmitter changes orientation while observing or emitting circularly polarized electromagnetic waves. This model extends work detailing Global Navigation Satellite Systems (GNSS) carrier phase wind-up to allow us to describe the interaction of changing satellite orientation with phase rotation in observing ra…
▽ More
We describe a model that accounts for the phase rotation that occurs when a receiver or transmitter changes orientation while observing or emitting circularly polarized electromagnetic waves. This model extends work detailing Global Navigation Satellite Systems (GNSS) carrier phase wind-up to allow us to describe the interaction of changing satellite orientation with phase rotation in observing radio telescopes. This development is motivated by, and a critical requirement of, unifying GNSS and Very Long Baseline Interferometry (VLBI) measurements at the observation level. The model can be used for either stationary choke ring antennas or steerable radio telescopes observing either natural radio sources or satellites. Simulations and experimental data are used to validate the model and to illustrate its importance. In addition, we rigorously lay out the feed rotation correction for radio telescopes with beam waveguide and full Nasmyth focuses and validate the correction by observing the effect with dual polarization observations. Using this feed rotation model for beam waveguide telescopes, we produce the first phase delay solution for the VLBI baseline WARK30M-WARK12M. We provide a practical guide to using the feed rotation model in Appendix D.
△ Less
Submitted 12 February, 2025;
originally announced February 2025.
-
Extracting Geodetic Data from GNSS-VLBI Co-Observation
Authors:
Joe Skeens,
Johnathan York,
Leonid Petrov,
Kyle Herrity,
Richard Ji-Cathriner,
Srinivas Bettadpur
Abstract:
We have been developing a novel interferometer formed directly between a Very Long Baseline Interferometry (VLBI) radio telescope and a Global Navigation Satellite Systems (GNSS) antenna/receiver. This interferometer is enabled by the High Rate Tracking Receiver (HRTR), a high-performance GNSS software-defined receiver that records baseband data similar to a VLBI receiving system. Of particular in…
▽ More
We have been developing a novel interferometer formed directly between a Very Long Baseline Interferometry (VLBI) radio telescope and a Global Navigation Satellite Systems (GNSS) antenna/receiver. This interferometer is enabled by the High Rate Tracking Receiver (HRTR), a high-performance GNSS software-defined receiver that records baseband data similar to a VLBI receiving system. Of particular interest is the potential of the technique to produce precise local tie vectors directly between the geodetic reference points of VLBI and GNSS antennas for use in the determination of combination terrestrial reference frames. In this paper, we will describe the unique setup of this interferometer before discussing current developmental work in estimating local tie vectors from experimental data collected using this technique. In particular, much recent work has been in exploring the possibility of direct comparison of the GNSS and VLBI processing techniques. A significant advantage of GNSS-VLBI co-observation of GNSS satellites comes from the ability to cross-check position and clock estimates derived from differential measurements in VLBI-style processing with differential GNSS processing and absolute GNSS positioning with Precise Point Positioning (PPP). We show a preliminary VLBI analysis of interferometric data including a differential positioning solution using phase delays.
△ Less
Submitted 18 October, 2024;
originally announced October 2024.
-
First observations with a GNSS antenna to radio telescope interferometer
Authors:
Joe Skeens,
Johnathan York,
Leonid Petrov,
David Munton,
Kyle Herrity,
Richard Ji-Cathriner,
Srinivas Bettadpur,
Thomas Gaussiran
Abstract:
We describe the design of a radio interferometer composed of a Global Navigation Satellite Systems (GNSS) antenna and a Very Long Baseline Interferometry (VLBI) radio telescope. Our eventual goal is to use this interferometer for geodetic applications including local tie measurements. The GNSS element of the interferometer uses a unique software-defined receiving system and modified commercial geo…
▽ More
We describe the design of a radio interferometer composed of a Global Navigation Satellite Systems (GNSS) antenna and a Very Long Baseline Interferometry (VLBI) radio telescope. Our eventual goal is to use this interferometer for geodetic applications including local tie measurements. The GNSS element of the interferometer uses a unique software-defined receiving system and modified commercial geodetic-quality GNSS antenna. We ran three observing sessions in 2022 between a 25 m radio telescope in Fort Davis, Texas (FD-VLBA), a transportable GNSS antenna placed within 100 meters, and a GNSS antenna placed at a distance of about 9 km. We have detected a strong interferometric response with a Signal-to-Noise Ratio (SNR) of over 1000 from Global Positioning System (GPS) and Galileo satellites. We also observed natural radio sources including Galactic supernova remnants and Active Galactic Nuclei (AGN) located as far as one gigaparsec, thus extending the range of sources that can be referenced to a GNSS antenna by 18 orders of magnitude. These detections represent the first observations made with a GNSS antenna to radio telescope interferometer. We have developed a novel technique based on a Precise Point Positioning (PPP) solution of the recorded GNSS signal that allows us to extend integration time at 1.5 GHz to at least 20 minutes without any noticeable SNR degradation when a rubidium frequency standard is used.
△ Less
Submitted 30 August, 2023; v1 submitted 21 April, 2023;
originally announced April 2023.
-
VGOS VLBI Intensives between MACGO12M and WETTZ13S for the rapid determination of UT1-UTC
Authors:
Matthias Schartner,
Leonid Petrov,
Christian Plötz,
Frank G. Lemoine,
Eusebio Terrazas,
Benedikt Soja
Abstract:
In this work, we present a status update and results of the designated research and development VLBI Intensive program VGOS-INT-S, observed between MACGO12M and WETTZ13S for the rapid determination of the Earth's phase of rotation, expressed via UT1-UTC. The main novelty of these sessions is the use of a special observation strategy, rapidly alternating between high- and low-elevation scans, enabl…
▽ More
In this work, we present a status update and results of the designated research and development VLBI Intensive program VGOS-INT-S, observed between MACGO12M and WETTZ13S for the rapid determination of the Earth's phase of rotation, expressed via UT1-UTC. The main novelty of these sessions is the use of a special observation strategy, rapidly alternating between high- and low-elevation scans, enabling an improved determination of delays caused by the neutral atmosphere. Since 2021, 25 Intensive sessions have been observed successfully. In early 2022, VGOS-INT-S was among the most accurate Intensive programs with an average formal error $σ_{UT1-UTC}$ of 3.1 $μ$s and a bias w.r.t. IERS C04 of 1.1 $μ$s. Later, the session performance decreased due to multiple technical difficulties.
△ Less
Submitted 16 February, 2023;
originally announced February 2023.
-
Precise VLBI/GNSS ties with micro-VLBI
Authors:
Leonid Petrov,
Johnathan York,
Joe Skeens,
Richard Ji-Cathriner,
David Munton,
Kyle Herrity
Abstract:
We present here a concept of measuring local ties between collocated GNSS and VLBI stations using the microwave technique that effectively transforms a GNSS receiver to an element of a VLBI network. This is achieved by modifying the signal chain that allows to transfer voltage of the GNSS antenna to a digitizer via a coaxial cable. We discuss the application of this technique to local tie measurem…
▽ More
We present here a concept of measuring local ties between collocated GNSS and VLBI stations using the microwave technique that effectively transforms a GNSS receiver to an element of a VLBI network. This is achieved by modifying the signal chain that allows to transfer voltage of the GNSS antenna to a digitizer via a coaxial cable. We discuss the application of this technique to local tie measurement. We have performed observations with a GNSS antenna and FD-VLBA radiotelescope and detected a strong interferometric signal from both radiogalaxies and GNSS satellites.
△ Less
Submitted 10 February, 2023;
originally announced February 2023.
-
Single band VLBI absolute astrometry
Authors:
Leonid Petrov
Abstract:
The ionospheric path delay impacts single-band very long baseline interferometry (VLBI) group delays, which limits their applicability for absolute astrometry. I consider two important cases: when observations are made simultaneously at two bands, but delays at only one band are available for a subset of observations and when observations are made at one band by design. I developed optimal procedu…
▽ More
The ionospheric path delay impacts single-band very long baseline interferometry (VLBI) group delays, which limits their applicability for absolute astrometry. I consider two important cases: when observations are made simultaneously at two bands, but delays at only one band are available for a subset of observations and when observations are made at one band by design. I developed optimal procedures of data analysis for both cases using Global Navigation Satellite System (GNSS) ionosphere maps, provided a stochastic model that describes ionospheric errors, and evaluated their impact on source position estimates. I demonstrate that the stochastic model is accurate at a level of 15%. I found that using GNSS ionospheric maps as is introduces serious biases in estimates of declinations and I developed the procedure that almost eliminates them. I found serendipitously that GNSS ionospheric maps have multiplicative errors and have to be scaled by 0.85 in order to mitigate the declination bias. A similar scale factor was found in comparison of the vertical total electron contents from satellite altimetry against GNSS ionospheric maps. I favor interpretation of this scaling factor as a manifestation of the inadequacy of the thin shell model of the ionosphere. I showed that we are able to model the ionospheric path delay to the extent that no noticeable systematic errors emerge and we are able to adequately assess the contribution of the ionosphere-driven random errors on source positions. This makes single-band absolute astrometry a viable option that can be used for source position determination.
△ Less
Submitted 15 February, 2023; v1 submitted 8 November, 2022;
originally announced November 2022.
-
Seasonal glacier and snow loading in Svalbard recovered from geodetic observations
Authors:
H. P. Kierulf,
W. van Pelt,
L. Petrov,
M. Dähnn,
A. -S. Kirkvik,
O. Omang
Abstract:
We processed time series from seven Global Navigation Satellite System (GNSS) stations and one Very Long Baseline Interferometry (VLBI) station in Svalbard. The goal was to capture the seasonal vertical displacements caused by elastic response of variable mass load due to ice and snow accumulation. We found that estimates of the annual signal in different GNSS solutions disagree by more than 3 mm…
▽ More
We processed time series from seven Global Navigation Satellite System (GNSS) stations and one Very Long Baseline Interferometry (VLBI) station in Svalbard. The goal was to capture the seasonal vertical displacements caused by elastic response of variable mass load due to ice and snow accumulation. We found that estimates of the annual signal in different GNSS solutions disagree by more than 3 mm which makes geophysical interpretation of raw GNSS time series problematic. To overcome this problem, we have used an enhanced Common Mode (CM) filtering technique. The time series are differentiated by the time series from remote station BJOS with known mass loading signals removed a priori. Using this technique, we have achieved a substantial reduction of the differences between the GNSS solutions. We have computed mass loading time series from a regional Climatic Mass Balance (CMB) and snow model that provides the amount of water equivalent at a 1 km resolution with a time step of 7 days. We found that the entire vertical loading signal is present in data of two totally independent techniques at a statistically significant level of 95%. This allowed us to conclude that the remaining errors in vertical signal derived from the CMB model are less than 0.2 mm at that significance level. Refining the land water storage loading model with a CMB model resulted in a reduction of the annual amplitude from 2.1 mm to 1.1 mm in the CM filtered time series, while it had only a marginal impact on raw time series. This provides a strong evidence that CM filtering is essential for revealing local periodic signals when a millimetre level of accuracy is required.
△ Less
Submitted 29 November, 2021; v1 submitted 12 May, 2021;
originally announced May 2021.
-
The use of astronomy VLBA campaign MOJAVE for geodesy
Authors:
Hana Krásná,
Leonid Petrov
Abstract:
We investigated the suitability of the astronomical 15 GHz VLBA observing program MOJAVE-5 for estimation of geodetic parameters, such as station coordinates and Earth orientation parameters. We processed contemporary geodetic dual-band RV and CN experiments observed at 2.3 GHz and 8.6 GHz starting on September 2016 through July 2020 as reference dataset. We showed that the baseline length repeata…
▽ More
We investigated the suitability of the astronomical 15 GHz VLBA observing program MOJAVE-5 for estimation of geodetic parameters, such as station coordinates and Earth orientation parameters. We processed contemporary geodetic dual-band RV and CN experiments observed at 2.3 GHz and 8.6 GHz starting on September 2016 through July 2020 as reference dataset. We showed that the baseline length repeatability from MOJAVE-5 experiments is only a factor of 1.5 greater than from the dedicated geodetic dataset and still below 1~ppb. The wrms of the difference of estimated EOP with respect to the reference IERS C04 time series are a factor of 1.3 to 1.8 worse. We isolated three major differences between the datasets in terms their possible impact on the geodetic results, i.e. the scheduling approach, treatment of the ionospheric delay, and selection of target radio sources. We showed that the major factor causing discrepancies in the estimated geodetic parameters is the different scheduling approach of the datasets. We conclude that systematic errors in MOJAVE-5 dataset are low enough for these data to be used as an excellent testbed for further investigations on the radio source structure effects in geodesy and astrometry.
△ Less
Submitted 2 May, 2021;
originally announced May 2021.
-
Energy transfer reaction K(4s) + K(7s) \rightarrow K(4s) + K(5f), theory compared with experiment
Authors:
M. Głódź,
A. Huzandrov,
S. Magnier,
L. Petrov,
I. Sydoryk,
J. Szonert,
J. Klavins,
K. Kowalski
Abstract:
A comparison between theory and experiment, concerning the K(4s)+K(7s)\rightarrow K(4s)+K(5f) reaction of energy transfer in thermal collisions, is presented. Relevant cross sections are calculated for the potassium vapour temperatures in the range of 310-1000 K. They are based on the theoretical adiabatic K_2 potential energy curves and on the use of the multicrossing Landau-Zener model. In the t…
▽ More
A comparison between theory and experiment, concerning the K(4s)+K(7s)\rightarrow K(4s)+K(5f) reaction of energy transfer in thermal collisions, is presented. Relevant cross sections are calculated for the potassium vapour temperatures in the range of 310-1000 K. They are based on the theoretical adiabatic K_2 potential energy curves and on the use of the multicrossing Landau-Zener model. In the temperature range of the present experiment, 428-451 K, the computed cross sections vary little, from 2.09x10^-14 cm^2 to 2.04x10^-14 cm^2, and agree well with the value 1.8(8)x10^-14 cm^2, which is the average of the corresponding experimental results.
△ Less
Submitted 30 December, 2017;
originally announced January 2018.
-
The International Mass Loading Service
Authors:
Leonid Petrov
Abstract:
The International Mass Loading Service computes four loadings: a) atmospheric pressure loading; b) land water storage loading; c) oceanic tidal loading; and d) non-tidal oceanic loading. The service provides to users the mass loading time series in three forms: 1) pre-computed time series for a list of 849 space geodesy stations; 2) pre-computed time series on the global 1deg x 1deg grid; and 3) o…
▽ More
The International Mass Loading Service computes four loadings: a) atmospheric pressure loading; b) land water storage loading; c) oceanic tidal loading; and d) non-tidal oceanic loading. The service provides to users the mass loading time series in three forms: 1) pre-computed time series for a list of 849 space geodesy stations; 2) pre-computed time series on the global 1deg x 1deg grid; and 3) on-demand Internet service for a list of stations and a time range specified by the user. The loading displacements are provided for the time period from 1979.01.01 through present, updated on an hourly basis, and have latencies 8-20 hours.
△ Less
Submitted 28 February, 2015;
originally announced March 2015.
-
First geodetic observations using new VLBI stations ASKAP-29 and WARK12M
Authors:
Leonid Petrov,
Chris Phillips,
Tasso Tzioumis,
Bruce Stansby,
Cormac Reynolds,
Hayley Bignall,
Sergei Gulyaev,
Tim Natusch,
Neville Palmer,
David Collett,
John Reynolds,
Shaun W Amy,
Randall Wayth,
Steven Tingay
Abstract:
We report the results of a successful 7 hour 1.4 GHz VLBI experiment using two new stations, ASKAP-29 located in Western Australia and WARK12M located on the North Island of New Zealand. This was the first geodetic VLBI observing session with the participation of these new stations. We have determined the positions of ASKAP-29 and WARK12M. Random errors on position estimates are 150-200 mm for the…
▽ More
We report the results of a successful 7 hour 1.4 GHz VLBI experiment using two new stations, ASKAP-29 located in Western Australia and WARK12M located on the North Island of New Zealand. This was the first geodetic VLBI observing session with the participation of these new stations. We have determined the positions of ASKAP-29 and WARK12M. Random errors on position estimates are 150-200 mm for the vertical component and 40-50 mm for the horizontal component. Systematic errors caused by the unmodeled ionosphere path delay may reach 1.3 m for the vertical component.
△ Less
Submitted 25 June, 2011; v1 submitted 20 December, 2010;
originally announced December 2010.
-
The use of the Long Baseline Array in Australia for precise geodesy and absolute astrometry
Authors:
Leonid Petrov,
Chris Phillips,
Alessandra Bertarini,
Adam Deller,
Sergei Pogrebenko,
Ari Mujunen
Abstract:
We report the results of a successful 12 hour 22 GHz VLBI experiment using a heterogeneous network that includes radio telescopes of the Long Baseline Array (LBA) in Australia and several VLBI stations that regularly observe in geodetic VLBI campaigns. We have determined positions of three VLBI stations, ATCA-104, CEDUNA and MOPRA, with an accuracy of 4-30mm using a novel technique of data analy…
▽ More
We report the results of a successful 12 hour 22 GHz VLBI experiment using a heterogeneous network that includes radio telescopes of the Long Baseline Array (LBA) in Australia and several VLBI stations that regularly observe in geodetic VLBI campaigns. We have determined positions of three VLBI stations, ATCA-104, CEDUNA and MOPRA, with an accuracy of 4-30mm using a novel technique of data analysis. These stations have never before participated in geodetic experiments. We observed 105 radio sources, and amongst them 5 objects which have not previously been observed with VLBI. We have determined positions of these new sources with the accuracy of 2-5 mas. We make conclusion that the LBA network is capable of conducting absolute astrometry VLBI surveys with accuracy better than 5 mas.
△ Less
Submitted 7 April, 2009; v1 submitted 3 September, 2008;
originally announced September 2008.
-
Precise geodesy with the Very Long Baseline Array
Authors:
Leonid Petrov,
David Gordon,
John Gipson,
Dan MacMillan,
Chopo Ma,
Ed Fomalont,
R. Craig Walker,
Claudia Carabajal
Abstract:
We report on a program of geodetic measurements between 1994 and 2007 which used the Very Long Baseline Array and up to 10 globally distributed antennas. One of the goals of this program was to monitor positions of the array at a 1 millimeter level of accuracy and to tie the VLBA into the International Terrestrial Reference Frame. We describe the analysis of these data and report several interes…
▽ More
We report on a program of geodetic measurements between 1994 and 2007 which used the Very Long Baseline Array and up to 10 globally distributed antennas. One of the goals of this program was to monitor positions of the array at a 1 millimeter level of accuracy and to tie the VLBA into the International Terrestrial Reference Frame. We describe the analysis of these data and report several interesting geophysical results including measured station displacements due to crustal motion, earthquakes, and antenna tilt. In terms of both formal errors and observed scatter, these sessions are among the very best geodetic VLBI experiments.
△ Less
Submitted 23 March, 2009; v1 submitted 1 June, 2008;
originally announced June 2008.
-
On observability of the free core nutation
Authors:
Leonid Petrov
Abstract:
Neither astronomical technique, including VLBI, can measure nutation directly. Estimates of parameters of the nutation model are produced by solving the LSQ problem of adjusting millions parameters using estimates of group delay. The choice of the mathematical model for nutation used in the estimation process of analysis of group delays affects our ability to interpret the results. Ignoring thes…
▽ More
Neither astronomical technique, including VLBI, can measure nutation directly. Estimates of parameters of the nutation model are produced by solving the LSQ problem of adjusting millions parameters using estimates of group delay. The choice of the mathematical model for nutation used in the estimation process of analysis of group delays affects our ability to interpret the results. Ignoring these subtleties and using parameters of the nutation model either in the form of time series, or in the form of empirical expansion as "VLBI measurement of nutation", opens a room for misinterpretation and mistakes. Detailed analysis of the problem reveals that the separation of forced nutations, atmospheric nutations, ocean nutations, and the retrograde free core nutation requires invoking some hypotheses, and beyond a specific level becomes uncertain. This sets a limit of our ability to make an inference about the free core nutation.
△ Less
Submitted 30 November, 2007;
originally announced December 2007.
-
Saturation effects in the sub-Doppler spectroscopy of Cesium vapor confined in an Extremely Thin Cell
Authors:
C. Andreeva,
S. Cartaleva,
L. Petrov,
S. M. Saltiel,
D. Sarkisyan,
T. Varzhapetyan,
D. Bloch,
M. Ducloy
Abstract:
Saturation effects affecting absorption and fluorescence spectra of an atomic vapor confined in an Extremely Thin Cell (cell thickness $L < 1 μm$) are investigated experimentally and theoretically. The study is performed on the $D_{2}$ line ($λ~= ~852 nm)$ of $Cs$ and concentrates on the two situations $L = λ/2$ and $L =λ$, the most contrasted ones with respect to the length dependence of the co…
▽ More
Saturation effects affecting absorption and fluorescence spectra of an atomic vapor confined in an Extremely Thin Cell (cell thickness $L < 1 μm$) are investigated experimentally and theoretically. The study is performed on the $D_{2}$ line ($λ~= ~852 nm)$ of $Cs$ and concentrates on the two situations $L = λ/2$ and $L =λ$, the most contrasted ones with respect to the length dependence of the coherent Dicke narrowing. For $L = λ/2$, the Dicke-narrowed absorption profile simply broadens and saturates in amplitude when increasing the light intensity, while for $L =λ$, sub-Doppler dips of reduced absorption at line-center appear on the broad absorption profile. For a fluorescence detection at $L =λ$, saturation induces narrow dips, but only for hyperfine components undergoing a population loss through optical pumping. These experimental results are interpreted with the help of the various existing models, and are compared with numerical calculations based upon a two-level modelling that considers both a closed and an open system.
△ Less
Submitted 6 June, 2007;
originally announced June 2007.
-
Ground-state magneto-optical resonances in Cesium vapour confined in an extremely thin cell
Authors:
C. Andreeva,
A. Atvars,
M. Auzinsh,
K. Bluss,
S. Cartaleva,
L. Petrov,
D. Slavov
Abstract:
Experimental and theoretical studies are presented related to the ground-state magneto-optical resonance prepared in Cesium vapour confined in an Extremely Thin Cell (ETC, with thickness equal to the wavelength of the irradiating light). It is shown that the utilization of the ETC allows one to examine the formation of a magneto-optical resonance on the individual hyperfine transitions, thus dis…
▽ More
Experimental and theoretical studies are presented related to the ground-state magneto-optical resonance prepared in Cesium vapour confined in an Extremely Thin Cell (ETC, with thickness equal to the wavelength of the irradiating light). It is shown that the utilization of the ETC allows one to examine the formation of a magneto-optical resonance on the individual hyperfine transitions, thus distinguishing processes resulting in dark (reduced absorption) or bright (enhanced absorption) resonance formation. We report on an experimental evidence of the bright magneto-optical resonance sign reversal in Cs atoms confined in the ETC. A theoretical model is proposed based on the optical Bloch equations that involves the elastic interaction processes of atoms in the ETC with its walls resulting in depolarization of the Cs excited state which is polarized by the exciting radiation. This depolarization leads to the sign reversal of the bright resonance. Using the proposed model, the magneto-optical resonance amplitude and width as a function of laser power are calculated and compared with the experimental ones. The numerical results are in good agreement with the experiment.
△ Less
Submitted 23 April, 2007;
originally announced April 2007.
-
Using a Numerical Weather Model to Improve Geodesy
Authors:
A. Niell,
L. Petrov
Abstract:
The use of a Numerical Weather Model (NWM) to provide in situ atmosphere information for mapping functions of atmosphere delay has been evaluated using Very Long Baseline Interferometry (VLBI) data spanning eleven years. Parameters required by the IMF mapping functions (Niell 2000, 2001) have been calculated from the NWM of the National Centers for Environmental Prediction (NCEP) and incorporate…
▽ More
The use of a Numerical Weather Model (NWM) to provide in situ atmosphere information for mapping functions of atmosphere delay has been evaluated using Very Long Baseline Interferometry (VLBI) data spanning eleven years. Parameters required by the IMF mapping functions (Niell 2000, 2001) have been calculated from the NWM of the National Centers for Environmental Prediction (NCEP) and incorporated in the CALC/SOLVE VLBI data analysis program. Compared with the use of the NMF mapping functions (Niell 1996) the application of IMF for global solutions demonstrates that the hydrostatic mapping function, IMFh, provides both significant improvement in baseline length repeatability and noticeable reduction in the amplitude of the residual harmonic site position variations at semidiurnal to long-period bands. For baseline length repeatability the reduction in the observed mean square deviations achieves 80 of the maximum that is expected for the change from NMF to IMF. On the other hand, the use of the wet mapping function, IMFw, as implemented using the NCEP data, results in a slight degradation of baseline length repeatability, probably due to the large grid spacing of the NWM that is used.
△ Less
Submitted 22 January, 2004;
originally announced January 2004.
-
Atmospheric pressure loading for routine data analysis
Authors:
L. Petrov,
J. -P. Boy
Abstract:
We have computed 3-D displacements induced by atmospheric pressure loading from 6-hourly surface pressure field from NCEP (National Center for Environmental Predictions) Reanalysis data for all Very Long Baseline Interferometry) and SLR (Satellite Laser Ranging) stations. We have quantitatively estimated the error budget our time series of pressure loading and found that the errors are below 15%…
▽ More
We have computed 3-D displacements induced by atmospheric pressure loading from 6-hourly surface pressure field from NCEP (National Center for Environmental Predictions) Reanalysis data for all Very Long Baseline Interferometry) and SLR (Satellite Laser Ranging) stations. We have quantitatively estimated the error budget our time series of pressure loading and found that the errors are below 15%. We validated our loading series by comparing them with a dataset of 3.5 million VLBI observations for the period of 1980--2003. We have shown that the amount of power which is present in the loading time series, but does not present in the VLBI data is, on average, only 5%. We have also succeeded, for the first time, to detect horizontal displacements caused by atmospheric loading. The correction of atmospheric loading in VLBI data allows a significant reduction of baseline repeatability, except for the annual component.
△ Less
Submitted 22 January, 2004;
originally announced January 2004.
-
Study of the atmospheric pressure loading signal in VLBI observations
Authors:
Leonid Petrov,
Jean-Paul Boy
Abstract:
Redistribution of air masses due to atmospheric circulation causes loading deformation of the Earth's crust which can be as large as 20 mm for the vertical component and 3 mm for horizontal components. Rigorous computation of site displacements caused by pressure loading requires knowledge of the surface pressure field over the entire Earth surface. A procedure for computing 3-D displacements of…
▽ More
Redistribution of air masses due to atmospheric circulation causes loading deformation of the Earth's crust which can be as large as 20 mm for the vertical component and 3 mm for horizontal components. Rigorous computation of site displacements caused by pressure loading requires knowledge of the surface pressure field over the entire Earth surface. A procedure for computing 3-D displacements of geodetic sites of interest using a 6-hourly pressure field from the NCEP numerical weather models and the Ponte and Ray [2002] model of atmospheric tides is presented. We investigated possible error sources and found that the errors of our pressure loading time series are below the 15% level. We validated our model by estimating the admittance factors of the pressure loading time series using a dataset of 3.5 million VLBI observations from 1980 to 2002. The admittance factors averaged over all sites are 0.95 -+ 0.02 for the vertical displacement and 1.00 -+ 0.07 for the horizontal displacements. For the first time horizontal displacements caused by atmospheric pressure loading have been detected. The closeness of these admittance factors to unity allows us to conclude that on average our model quantitatively agrees with the observations within the error budget of the model. At the same time we found that the model is not accurate for several stations which are near a coast or in mountain regions. We conclude that our model is suitable for routine data reduction of space geodesy observations.
△ Less
Submitted 19 November, 2003;
originally announced November 2003.
-
Modelling of Desorption from Small Metal Clusters
Authors:
Maria K. Koleva,
L. A. Petrov
Abstract:
It is found out that there are physical effects, typical of small metal clusters deposited on a non-adsorbing support, that cause a difference between the adsorption properties of sites at the metal cluster surface and those of sites at the boundary of metal-support. This difference gives rise to an extra band in the IR spectra of the adsorbate whose major property is that its intensity changes…
▽ More
It is found out that there are physical effects, typical of small metal clusters deposited on a non-adsorbing support, that cause a difference between the adsorption properties of sites at the metal cluster surface and those of sites at the boundary of metal-support. This difference gives rise to an extra band in the IR spectra of the adsorbate whose major property is that its intensity changes with cluster size.
The migration of chemisorbed molecules (atoms, ions) and molecules (atoms, ions) in any excited state over adsorption sites of different type results in changes in the state of the molecule (atom, ion) since the latter adjusts its state to the set of levels of another type of site. This can be described figuratively as a transformation of the type of adsorption site. Thus, a single type of adsorption site, called next surface effective site (SES), is formed. The energy of desorption from SES site retains an explicit dependence on the metal cluster size. A simulation of TPD spectra of oxygen desorption from small Pt clusters deposited on NaX zeolite was carried out. A comparison to experimental TPD spectra obtained by Jaeger and co-workers for the same system is made.
△ Less
Submitted 29 August, 2003;
originally announced August 2003.
