-
Viscoelastic properties of wood across the grain measured under water-saturated conditions up to 135\degree C: evidence of thermal degradation
Authors:
Vincent Placet,
Joëlle Passard,
Patrick Perré
Abstract:
In this paper, the viscoelastic properties of wood under water-saturated conditions are investigated from 10\degree C to 135\degree C using the WAVET* apparatus. Experiments were performed via harmonic tests at two frequencies (0.1 Hz and 1 Hz) for several hours. Four species of wood were tested in the radial and tangential material directions: oak (Quercus sessiliflora), beech (Fagus sylvatica)…
▽ More
In this paper, the viscoelastic properties of wood under water-saturated conditions are investigated from 10\degree C to 135\degree C using the WAVET* apparatus. Experiments were performed via harmonic tests at two frequencies (0.1 Hz and 1 Hz) for several hours. Four species of wood were tested in the radial and tangential material directions: oak (Quercus sessiliflora), beech (Fagus sylvatica), spruce (Picea abies) and fir (Abies pectinata). When the treatment is applied for several hours, a reduction of the wood rigidity is significant from temperature values as low as 80-90\degree C, and increases rapidly with the temperature level. The storage modulus of oak wood is divided by a factor two after three hours of exposure at 135\degree C. This marked reduction in rigidity is attributed to the hydrolysis of hemicelluloses. The softening temperature of wood is also noticeably affected by hygrothermal treatment. After three short successive treatments up to 135\degree C, the softening temperature of oak shifted from 79\degree C to 103\degree C, at a frequency of 1 Hz. This reduction in mobility of wood polymers is consistent with the condensation of lignins observed by many authors at this temperature level. In the same conditions, fir exhibited a softening temperature decreasing of about 4\degree C. In any case, the internal friction clearly raises.
△ Less
Submitted 19 June, 2009;
originally announced June 2009.
-
Viscoelastic properties of green wood across the grain measured by harmonic tests in the range of 0\degree C to 95\degree C. Hardwood vs. softwood and normal wood vs. reaction wood
Authors:
Vincent Placet,
Joëlle Passard,
Patrick Perré
Abstract:
The viscoelastic properties of wood have been investigated with a dynamic mechanical analyser (DMA) specifically conceived for wooden materials, the WAVET device (environmental vibration analyser for wood). Measurements were carried out on four wood species in the temperature range of 0\degree C to 100\degree C at frequencies varying between 5 mHz and 10 Hz. Wood samples were tested in water-sat…
▽ More
The viscoelastic properties of wood have been investigated with a dynamic mechanical analyser (DMA) specifically conceived for wooden materials, the WAVET device (environmental vibration analyser for wood). Measurements were carried out on four wood species in the temperature range of 0\degree C to 100\degree C at frequencies varying between 5 mHz and 10 Hz. Wood samples were tested in water-saturated conditions, in radial and tangential directions. As expected, the radial direction always revealed a higher storage modulus than the tangential direction. Great differences were also observed in the loss factor. The tanδpeak and the internal friction are higher in tangential direction than in radial direction. This behaviour is attributed to the fact that anatomical elements act depending on the direction. Viscoelastic behaviour of reaction wood differs from that of normal or opposite wood. Compression wood of spruce, which has higher lignin content, is denser and stiffer in transverse directions than normal wood, and has lower softening temperature (Tg). In tension wood, the G-layer is weakly attached to the rest of the wall layers. This may explain why the storage modulus and the softening temperature of tension wood are lower than those for the opposite wood. In this work, we also point out that the time-temperature equivalence fits only around the transition region, i.e. between Tg and Tg + 30\degree C. Apart from these regions, the wood response combines the effect of all constitutive polymers, so that the equivalence is not valid anymore.
△ Less
Submitted 19 June, 2009;
originally announced June 2009.
-
WAVET*, a custom device able to measure viscoelastic properties of wood under water saturated conditions (*WAVET : Environmental Vibration Analyser for Wood)
Authors:
Vincent Placet,
Joëlle Passard,
Patrick Perré
Abstract:
This work presents an original experimental device conceived to characterise the viscoelastic properties of wood. Classically, the dynamic mechanical analysis of wood is performed using a commercial apparatus like a DMA (Dynamic Mechanical Analyser). However, when analysing wood with this type of apparatus, many problems related to the hygroscopic behaviour and the orthotropic structure of wood…
▽ More
This work presents an original experimental device conceived to characterise the viscoelastic properties of wood. Classically, the dynamic mechanical analysis of wood is performed using a commercial apparatus like a DMA (Dynamic Mechanical Analyser). However, when analysing wood with this type of apparatus, many problems related to the hygroscopic behaviour and the orthotropic structure of wood may be encountered. This is why an original apparatus perfectly adapted to the wood features has been developed. The WAVET is able to measure the viscoelastic properties of wood samples under water-saturated conditions, in the temperature range of 5\degree C to 95\degree C at frequencies varying between 0.005 Hz and 10 Hz. Samples are tested in a cantilever configuration. The whole experiment has been designed to withstand the severe conditions of temperature and humidity. At the same time, an analytical model based on Kelvin's elements has been developed. This model is able to correct experimental measurements performed close to the resonance frequency. Results obtained for beech samples in radial and tangential directions using the WAVET and a commercial apparatus (DMA 2980 TA Instruments) are compared and discussed. This comparison underlines the relevance of the WAVET device.
△ Less
Submitted 19 June, 2009;
originally announced June 2009.
-
Shrinkage of cane (Arundo donax L.) II Effect of drying condition on the intensity of cell collapse
Authors:
Eiichi Obataya,
Joseph Gril,
Patrick Perré
Abstract:
To improve the drying method in the manufacture of woodwind reeds, green canes (Arundo donax L.) were dried under various humidity-temperature conditions and the intensity of cell collapse was evaluated from the swelling due to steaming involving the recovery of collapse. At 30 C, the intensity of collapse was increased by slower drying. It was considered that: 1) slower drying resulted in highe…
▽ More
To improve the drying method in the manufacture of woodwind reeds, green canes (Arundo donax L.) were dried under various humidity-temperature conditions and the intensity of cell collapse was evaluated from the swelling due to steaming involving the recovery of collapse. At 30 C, the intensity of collapse was increased by slower drying. It was considered that: 1) slower drying resulted in higher sample temperature in the early stage of drying to increase the collapse; 2) rapid drying stiffened the surface of sample and such "shell" prohibited the following collapse; 3) slower drying i.e. longer loading of liquid tension caused more remarkable and/or frequent viscoelastic yields of cells. Consequently the intensity of collapse increased when the cane was dried from its waxy outer surface or in the presence of node: both of them retarded the drying. On the other hand, higher drying temperature caused greater intensity of collapse in spite of faster drying. It was suggested that the thermal softening of cane cells leads to easier yield of the cell wall, at the same time the rapid drying does not allow the recovery of collapse after the disappearance of free water. These results indicated that faster drying at lower temperature is preferable for drying cane with less collapse.
△ Less
Submitted 23 March, 2005;
originally announced March 2005.
