-
Organic Electronics Picks Up the Pace: Mask-Less, Solution Processed Organic Transistors Operating at 160 MHz
Authors:
Andrea Perinot,
Michele Giorgio,
Virgilio Mattoli,
Dario Natali,
Mario Caironi
Abstract:
Organic printed electronics has proven its potential as an essential enabler for applications related to healthcare, entertainment, energy and distributed intelligent objects. The possibility of exploiting solution-based and direct-writing production schemes further boosts the benefits offered by such technology, facilitating the implementation of cheap, conformable, bio-compatible electronic appl…
▽ More
Organic printed electronics has proven its potential as an essential enabler for applications related to healthcare, entertainment, energy and distributed intelligent objects. The possibility of exploiting solution-based and direct-writing production schemes further boosts the benefits offered by such technology, facilitating the implementation of cheap, conformable, bio-compatible electronic applications. The result shown in this work challenges the widespread assumption that such class of electronic devices is relegated to low-frequency operation, owing to the limited charge mobility of the materials and to the low spatial resolution achievable with conventional printing techniques. Here, it is shown that solution-processed and direct-written organic field-effect transistors can be carefully designed and fabricated so to achieve a maximum transition frequency of 160 MHz, unlocking an operational range that was not available before for organics. Such range was believed to be only accessible with more performing classes of semiconductor materials and/or more expensive fabrication schemes. The present achievement opens a route for cost- and energy-efficient manufacturability of flexible and conformable electronics with wireless-communication capabilities.
△ Less
Submitted 14 September, 2020;
originally announced September 2020.
-
Photo-electrical properties of 2D Quantum Confined Metal Organic Chalcogenides Nanocrystal Films
Authors:
Lorenzo Maserati,
Mirko Prato,
Stefano Pecorario,
Bianca Passarella,
Andrea Perinot,
Anupa Anna Thomas,
Filippo Melloni,
Dario Natali,
Mario Caironi
Abstract:
2D quantum confined hybrid materials are of great interest from a solid state physics standpoint because of the rich multibody phenomena hosted, their tunability and easy synthesis allowing to create material libraries. In addition, from a technological standpoint, 2D hybrids are promising candidates for efficient, tunable, low cost materials impacting a broad range of optoelectronic devices. Diff…
▽ More
2D quantum confined hybrid materials are of great interest from a solid state physics standpoint because of the rich multibody phenomena hosted, their tunability and easy synthesis allowing to create material libraries. In addition, from a technological standpoint, 2D hybrids are promising candidates for efficient, tunable, low cost materials impacting a broad range of optoelectronic devices. Different approaches and materials have therefore been investigated, with the notable example of 2D metal halide hybrid perovskites. Despite the remarkable properties of such materials, the presence of toxic elements like lead are not desirable in applications and their ionic lattices may represent a limiting factor for stability under operating conditions. Alternative, non-ionic 2D materials made of non-toxic elements are therefore desirable. In order to expand the library of possible hybrid quantum wells materials, here we consider an alternative platform based on non-toxic, self-assembled, metal-organic chalcogenides. While the optical properties have been recently explored and some unique excitonic characters highlighted, photo-generation of carriers and their transport in these lamellar inorganic/organic nanostructures, critical optoelectronic aspects, remain totally unexplored. We hereby report the first electrical investigation of the air-stable [AgSePh] 2D coordination polymer in form of nanocrystal (NC) films readily synthesized in situ and at low temperature, compatible with flexible plastic substrates. The wavelength-dependent photo-response of the NC films suggests possible use of this materials as near-UV photodetector. We therefore built a lateral photo-detector, achieving a sensitivity of 0.8 A/W at 370 nm thanks to a photoconduction mechanism, and a cutoff frequency of ~400 Hz, and validated its reliability as air-stable UV detector on flexible substrates.
△ Less
Submitted 30 July, 2020;
originally announced July 2020.
-
Probing Mobile Charge Carriers in Semiconducting Carbon Nanotube Networks by Charge Modulation Spectroscopy
Authors:
Nicolas F. Zorn,
Francesca Scuratti,
Felix J. Berger,
Andrea Perinot,
Daniel Heimfarth,
Mario Caironi,
Jana Zaumseil
Abstract:
Solution-processed networks of semiconducting, single-walled carbon nanotubes (SWCNTs) have attracted considerable attention as materials for next-generation electronic devices and circuits. However, the impact of the SWCNT network composition on charge transport on a microscopic level remains an open and complex question. Here, we use charge-modulated absorption and photoluminescence spectroscopy…
▽ More
Solution-processed networks of semiconducting, single-walled carbon nanotubes (SWCNTs) have attracted considerable attention as materials for next-generation electronic devices and circuits. However, the impact of the SWCNT network composition on charge transport on a microscopic level remains an open and complex question. Here, we use charge-modulated absorption and photoluminescence spectroscopy to probe exclusively the mobile charge carriers in monochiral (6,5) and mixed SWCNT network field-effect transistors. Ground state bleaching and charge-induced trion absorption features, as well as exciton quenching are observed depending on applied voltage and modulation frequency. Through correlation of the modulated mobile carrier density and the optical response of the nanotubes, we find that charge transport in mixed SWCNT networks depends strongly on the diameter and thus bandgap of the individual species. Mobile charges are preferentially transported by small bandgap SWCNTs especially at low gate voltages, whereas large bandgap species only start to participate at higher carrier concentrations. Our results demonstrate the excellent suitability of modulation spectroscopy to investigate charge transport in nanotube network transistors and highlight the importance of SWCNT network composition for their performance.
△ Less
Submitted 4 February, 2020;
originally announced February 2020.
-
Accessing MHz Operation at 2 V with Field-Effect Transistors Based on Printed Polymers on Plastic
Authors:
Andrea Perinot,
Mario Caironi
Abstract:
Organic printed electronics is proving its suitability for the development of wearable, lightweight, distributed applications in combination with cost-effective production processes. Nonetheless, some necessary features for several envisioned disruptive mass-produced products are still lacking: among these radio-frequency (RF) communication capability, which requires high operational speed combine…
▽ More
Organic printed electronics is proving its suitability for the development of wearable, lightweight, distributed applications in combination with cost-effective production processes. Nonetheless, some necessary features for several envisioned disruptive mass-produced products are still lacking: among these radio-frequency (RF) communication capability, which requires high operational speed combined with low supply voltage in electronic devices processed on cheap plastic foils. Here, we demonstrate that high-frequency, low-voltage, polymer field-effect transistors can be fabricated on plastic with the sole use of a combination of scalable printing and digital laser-based techniques. These devices reach an operational frequency in excess of 1 MHz at the challengingly low bias voltage of 2 V, and exceed 14 MHz operation at 7 V. In addition, when integrated into a rectifying circuit, they can provide a DC voltage at an input frequency of 13.56 MHz, opening the way for the implementation of RF devices and tags with cost-effective production processes.
△ Less
Submitted 28 November, 2019;
originally announced November 2019.
