-
A numerical modeling of wave-inclined slats interaction for particle methods
Authors:
Lucas Soares Pereira,
Rubens Augusto Amaro Junior,
Liang-Yee Cheng,
Fabricio Simeoni de Sousa,
Gustavo Massaki Karuka
Abstract:
MPS-VG, a Virtual Grating (VG) model for the Lagrangian mesh-free Moving Particle Semi-implicit (MPS) method is proposed for replacing conventional particle-based solid modeling of gratings with a set of thin inclined slats. Unlike most approaches for perforated wave energy dampening devices, in which the flow through the device is simplified by pressure loss or damping effects without flow deflec…
▽ More
MPS-VG, a Virtual Grating (VG) model for the Lagrangian mesh-free Moving Particle Semi-implicit (MPS) method is proposed for replacing conventional particle-based solid modeling of gratings with a set of thin inclined slats. Unlike most approaches for perforated wave energy dampening devices, in which the flow through the device is simplified by pressure loss or damping effects without flow deflection, MPS-VG models the angular deviation caused by hydrodynamic impact on inclined slats. Both accuracy and computational performance of the model were checked through a simulation of wet dam break scenarios with the grating structures placed horizontally or vertically. The results were compared with those from fully particle-based modeling. MPS-VG correctly predicted complex wave-structure interactions using a relatively low-resolution model and significantly reduced processing time and memory storage compared to conventional particle-based MPS modeling. The evaluation of the performance of the gratings with inclined slats as wave energy dampers revealed the horizontal gratings outperformed the vertical ones. Therefore, qualitative and quantitative agreements strengthened the potential of MPS-VG as a practical and computationally efficient tool for the study of multi-scale phenomena of wave impacts on grating with inclined slats.
△ Less
Submitted 15 January, 2025;
originally announced January 2025.
-
Observation of non-Hermitian topology from optical loss modulation
Authors:
Amin Hashemi,
Elizabeth Louis Pereira,
Hongwei Li,
Jose L. Lado,
Andrea Blanco-Redondo
Abstract:
Understanding the interplay of non-Hermiticity and topology is crucial given the intrinsic openness of most natural and engineered systems and it has important ramifications in topological lasers and sensors. Intense efforts have been devoted to unveiling how non-Hermiticity may impact the most significant features of topological systems, but only recently it has been theoretically proposed that t…
▽ More
Understanding the interplay of non-Hermiticity and topology is crucial given the intrinsic openness of most natural and engineered systems and it has important ramifications in topological lasers and sensors. Intense efforts have been devoted to unveiling how non-Hermiticity may impact the most significant features of topological systems, but only recently it has been theoretically proposed that topological features could originate solely from the system's non-Hermiticity in photonic systems. In this work, we experimentally demonstrate the appearance of non-Hermitian topology exclusively from loss modulation in a photonic system that is topologically trivial in the absence of loss. We do this by implementing a non-Hermitian generalization of an Aubry-Andre-Harper model with purely imaginary potential in a programmable integrated photonics platform, which allows us to investigate different periodic and quasi-periodic configurations of the model. In both cases, we show the emergence of topological edge modes and explore their resilience to different kinds of disorder. Our work highlights loss engineering as a mechanism to generate topological properties.
△ Less
Submitted 13 November, 2024;
originally announced November 2024.
-
Simplified magnet design and manufacture based on patterning of wide conductors
Authors:
Diego Pereira Botelho,
Victor Prost,
Luana Barbosa Pina Pereira,
Francesco A. Volpe
Abstract:
The fabrication and assembly of High Temperature Superconducting (HTS) magnets can be significantly streamlined by (1) direct deposition of HTS onto modular components and (2) laser-ablated grooves to bound and guide the electric currents over the superconducting surfaces. "Coils" bounded by consecutive grooves can be individually powered, or connected in series, or in parallel. Applications inclu…
▽ More
The fabrication and assembly of High Temperature Superconducting (HTS) magnets can be significantly streamlined by (1) direct deposition of HTS onto modular components and (2) laser-ablated grooves to bound and guide the electric currents over the superconducting surfaces. "Coils" bounded by consecutive grooves can be individually powered, or connected in series, or in parallel. Applications include plasma-confinement devices such as stellarators and magnets for particle accelerators. On the way to HTS magnets generating more complicated three-dimensional fields, this paper validates the technique for two cylindrically symmetric magnets made of standard conductors. The optimized grooving pattern is considered as an inverse problem that is resolved using a least squares approach with Tikhonov regularization. This approach was first applied to design a magnet that replicates the magnetic field configuration of a microwave source of the gyrotron type. Gyrotrons require a particular profile of magnetic field, which our aluminium prototype successfully reproduced with 10$^{-1}$ precision. The second one, in copper, is a small-size, reduced-field magnet for Magnetic Resonance Imaging (MRI). This application requires highly uniform longitudinal fields. The achieved precision (about 50 ppm) is exceptional for an MRI magnet just getting out of the factory, and can easily meet hospital standards after minimal shimming or other error field correction. Future work and other potential applications of wide, patterned conductors or superconductors are also discussed.
△ Less
Submitted 30 September, 2024;
originally announced September 2024.
-
Radial-angular coupling in self phase modulation with structured light
Authors:
M. Gil de Oliveira,
L. J. Pereira,
A. S. Santos,
K. Dechoum,
A. Bramati,
A. Z. Khoury
Abstract:
In this work we study the evolution of an optical vortex undergoing self phase modulation inside a nonlinear Kerr medium. The intensity dependent phase evolution couples the angular and radial degrees of freedom of the input vortex, giving rise to a rich dynamics where new radial modes are created. In the short propagation range, this dynamics is well described by a perturbative approach, predicti…
▽ More
In this work we study the evolution of an optical vortex undergoing self phase modulation inside a nonlinear Kerr medium. The intensity dependent phase evolution couples the angular and radial degrees of freedom of the input vortex, giving rise to a rich dynamics where new radial modes are created. In the short propagation range, this dynamics is well described by a perturbative approach, predicting the generation of modes with radial numbers between zero and the absolute value of the vortex topological charge. This prediction is confirmed by numerical simulations of the nonlinear propagation equation.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Non-Hermitian topology and criticality in photonic arrays with engineered losses
Authors:
Elizabeth Louis Pereira,
Hongwei Li,
Andrea Blanco-Redondo,
Jose L. Lado
Abstract:
Integrated photonic systems provide a flexible platform where artificial lattices can be engineered in a reconfigurable fashion. Here, we show that one-dimensional photonic arrays with engineered losses allow the realization of topological excitations stemming from non-Hermiticity and bulk mode criticality. We show that a generalized modulation of the local photonic losses allows the creation of t…
▽ More
Integrated photonic systems provide a flexible platform where artificial lattices can be engineered in a reconfigurable fashion. Here, we show that one-dimensional photonic arrays with engineered losses allow the realization of topological excitations stemming from non-Hermiticity and bulk mode criticality. We show that a generalized modulation of the local photonic losses allows the creation of topological modes both in the presence of periodicity and even in the quasiperiodic regime. We demonstrate that a localization transition of all the bulk photonic modes can be engineered in the presence of a quasiperiodic loss modulation, and we further demonstrate that such a transition can be created in the presence of both resonance frequency modulation and loss modulation. We finally address the robustness of this phenomenology to the presence of next to the nearest neighbor couplings and disorder in the emergence of criticality and topological modes. Our results put forward a strategy to engineer topology and criticality solely from engineered losses in a photonic system, establishing a potential platform to study the impact of nonlinearities in topological and critical photonic matter.
△ Less
Submitted 4 April, 2024; v1 submitted 16 November, 2023;
originally announced November 2023.
-
Ground observations of a space laser for the assessment of its in-orbit performance
Authors:
The Pierre Auger Collaboration,
O. Lux,
I. Krisch,
O. Reitebuch,
D. Huber,
D. Wernham,
T. Parrinello,
:,
A. Abdul Halim,
P. Abreu,
M. Aglietta,
I. Allekotte,
K. Almeida Cheminant,
A. Almela,
R. Aloisio,
J. Alvarez-Muñiz,
J. Ammerman Yebra,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
Anukriti,
L. Apollonio,
C. Aramo,
P. R. Araújo Ferreira
, et al. (358 additional authors not shown)
Abstract:
The wind mission Aeolus of the European Space Agency was a groundbreaking achievement for Earth observation. Between 2018 and 2023, the space-borne lidar instrument ALADIN onboard the Aeolus satellite measured atmospheric wind profiles with global coverage which contributed to improving the accuracy of numerical weather prediction. The precision of the wind observations, however, declined over the…
▽ More
The wind mission Aeolus of the European Space Agency was a groundbreaking achievement for Earth observation. Between 2018 and 2023, the space-borne lidar instrument ALADIN onboard the Aeolus satellite measured atmospheric wind profiles with global coverage which contributed to improving the accuracy of numerical weather prediction. The precision of the wind observations, however, declined over the course of the mission due to a progressive loss of the atmospheric backscatter signal. The analysis of the root cause was supported by the Pierre Auger Observatory in Argentina whose fluorescence detector registered the ultraviolet laser pulses emitted from the instrument in space, thereby offering an estimation of the laser energy at the exit of the instrument for several days in 2019, 2020 and 2021. The reconstruction of the laser beam not only allowed for an independent assessment of the Aeolus performance, but also helped to improve the accuracy in the determination of the laser beam's ground track on single pulse level. The results presented in this paper set a precedent for the monitoring of space lasers by ground-based telescopes and open new possibilities for the calibration of cosmic-ray observatories.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
Non-Markovianity in High-Dimensional Open Quantum Systems using Next-generation Multicore Optical Fibers
Authors:
Santiago Rojas-Rojas,
Daniel Martínez,
Kei Sawada,
Luciano Pereira,
Stephen P. Walborn,
Esteban S. Gómez,
Nadja K. Bernardes,
Gustavo Lima
Abstract:
With the advent of quantum technology, the interest in communication tasks assisted by quantum systems has increased both in academia and industry. Nonetheless, the transmission of a quantum state in real-world scenarios is bounded by environmental noise, so that the quantum channel is an open quantum system. In this work, we study a high-dimensional open quantum system in a multicore optical fibe…
▽ More
With the advent of quantum technology, the interest in communication tasks assisted by quantum systems has increased both in academia and industry. Nonetheless, the transmission of a quantum state in real-world scenarios is bounded by environmental noise, so that the quantum channel is an open quantum system. In this work, we study a high-dimensional open quantum system in a multicore optical fiber by characterizing the environmental interaction as quantum operations corresponding to probabilistic phase-flips. The experimental platform is currently state-of-the-art for quantum information processing with multicore fibers. At a given evolution stage we observe a non-Markovian behaviour of the system, which is demonstrated through a proof-of-principle implementation of the Quantum Vault protocol. A better understanding of phase-noise in multicore fibers will improve several real-world communication protocols, since they are a prime candidate to be adopted in future telecom networks.
△ Less
Submitted 8 August, 2024; v1 submitted 31 July, 2023;
originally announced August 2023.
-
Optical and electronic properties of a two-dimensional quantum ring under rotating effects
Authors:
Daniel F. Lima,
Frankbelson dos S. Azevedo,
Luís Fernando C. Pereira,
Cleverson Filgueiras,
Edilberto O. Silva
Abstract:
This work presents a study on the nonrelativistic quantum motion of a charged particle in a rotating frame, considering the Aharonov-Bohm effect and a uniform magnetic field. We derive the equation of motion and the corresponding radial equation to describe the system. The Schrödinger equation with minimal coupling incorporates rotation effects by substituting the momentum operator with an effecti…
▽ More
This work presents a study on the nonrelativistic quantum motion of a charged particle in a rotating frame, considering the Aharonov-Bohm effect and a uniform magnetic field. We derive the equation of motion and the corresponding radial equation to describe the system. The Schrödinger equation with minimal coupling incorporates rotation effects by substituting the momentum operator with an effective four-potential. Additionally, a radial potential term, dependent on the average radius of the ring, is introduced. The analysis is restricted to motion in a two-dimensional plane, neglecting the degree of freedom in the $z$-direction. By solving the radial equation, we determine the eigenvalues and eigenfunctions, allowing for an explicit expression of the energy. The probability distribution is analyzed for varying rotating parameter values, revealing a shift of the distribution as the rotation changes, resulting in a centrifugal effect and occupation of the ring's edges. Furthermore, numerical analysis demonstrates the significant rotational effects on energy levels and optical properties, including optical absorption and refractive coefficients.
△ Less
Submitted 25 May, 2023;
originally announced May 2023.
-
Empirical Study of Quality Image Assessment for Synthesis of Fetal Head Ultrasound Imaging with DCGANs
Authors:
Thea Bautista,
Jacqueline Matthew,
Hamideh Kerdegari,
Laura Peralta Pereira,
Miguel Xochicale
Abstract:
In this work, we present an empirical study of DCGANs, including hyperparameter heuristics and image quality assessment, as a way to address the scarcity of datasets to investigate fetal head ultrasound. We present experiments to show the impact of different image resolutions, epochs, dataset size input, and learning rates for quality image assessment on four metrics: mutual information (MI), Fréc…
▽ More
In this work, we present an empirical study of DCGANs, including hyperparameter heuristics and image quality assessment, as a way to address the scarcity of datasets to investigate fetal head ultrasound. We present experiments to show the impact of different image resolutions, epochs, dataset size input, and learning rates for quality image assessment on four metrics: mutual information (MI), Fréchet inception distance (FID), peak-signal-to-noise ratio (PSNR), and local binary pattern vector (LBPv). The results show that FID and LBPv have stronger relationship with clinical image quality scores. The resources to reproduce this work are available at \url{https://github.com/budai4medtech/miua2022}.
△ Less
Submitted 27 June, 2022; v1 submitted 1 June, 2022;
originally announced June 2022.
-
Spin to orbital angular momentum transfer in nonlinear wave mixing
Authors:
B. Pinheiro da Silva,
W. T. Buono,
L. J. Pereira,
D. S. Tasca,
K. Dechoum,
A. Z. Khoury
Abstract:
We demonstrate the spin to orbital angular momentum transfer in the nonlinear mixing of structured light beams. A vector vortex is coupled to a circularly polarized Gaussian beam in noncollinear second harmonic generation under type-II phase match. The second harmonic beam inherits the Hermite-Gaussian components of the vector vortex, however, the relative phase between them is determined by the p…
▽ More
We demonstrate the spin to orbital angular momentum transfer in the nonlinear mixing of structured light beams. A vector vortex is coupled to a circularly polarized Gaussian beam in noncollinear second harmonic generation under type-II phase match. The second harmonic beam inherits the Hermite-Gaussian components of the vector vortex, however, the relative phase between them is determined by the polarization state of the Gaussian beam. This effect creates an interesting crosstalk between spin and orbital degrees of freedom, allowing the angular momentum transfer between them. Our experimental results match the theoretical predictions for the nonlinear optical response.
△ Less
Submitted 30 August, 2021;
originally announced August 2021.
-
The Soccer Game, bit by bit: An information-theoretic analysis
Authors:
Luis Ramada Pereira,
Rui J. Lopes,
Jorge Louçã,
Duarte Araújo,
João Ramos
Abstract:
We modeled the dynamics of a soccer match based on a network representation where players are nodes discretely clustered into homogeneous groups. Players were grouped by physical proximity, supported by the intuitive notion that competing and same-team players use relative position as a key tactical tool to contribute to the team's objectives. The model was applied to a set of matches from a major…
▽ More
We modeled the dynamics of a soccer match based on a network representation where players are nodes discretely clustered into homogeneous groups. Players were grouped by physical proximity, supported by the intuitive notion that competing and same-team players use relative position as a key tactical tool to contribute to the team's objectives. The model was applied to a set of matches from a major European national football league, with players' coordinates sampled at 10Hz, resulting in approx. 60,000 network samples per match. We took an information theoretic approach to measuring distance between samples and used it as a proxy for the game dynamics. Significant correlations were found between measurements and key match events that are empirically known to result in players jostling for position, such as when striving to get unmarked or to mark. These events increase the information distance, while breaks in game play have the opposite effect. By analyzing the frequency spectrum of players' cluster transitions and their corresponding information distance, it is possible to build a comprehensive view of player's interactions, useful for training and strategy development. This analysis can be drilled down to the level of individual players by quantifying their contribution to cluster breakup and emergence, building an overall multi-level map that provides insights into the game dynamics, from the individual player, to the clusters of interacting players, all the way to the teams and their matches.
△ Less
Submitted 6 August, 2021; v1 submitted 22 February, 2021;
originally announced February 2021.
-
Idler-free channel position finding
Authors:
Jason L. Pereira,
Leonardo Banchi,
Quntao Zhuang,
Stefano Pirandola
Abstract:
Entanglement is a powerful tool for quantum sensing, and entangled states can greatly boost the discriminative power of protocols for quantum illumination, quantum metrology, or quantum reading. However, entangled state protocols generally require the retention of an idler state, to which the probes are entangled. Storing a quantum state is difficult and so technological limitations can make proto…
▽ More
Entanglement is a powerful tool for quantum sensing, and entangled states can greatly boost the discriminative power of protocols for quantum illumination, quantum metrology, or quantum reading. However, entangled state protocols generally require the retention of an idler state, to which the probes are entangled. Storing a quantum state is difficult and so technological limitations can make protocols requiring quantum memories impracticable. One alternative is idler-free protocols that utilise non-classical sources but do not require any idler states to be stored. Here we apply such a protocol to the task of channel position finding. This involves finding a target channel in a sequence of background channels, and has many applications, including quantum sensing, quantum spectroscopy, and quantum reading.
△ Less
Submitted 29 April, 2021; v1 submitted 20 October, 2020;
originally announced October 2020.
-
Majority-vote model with limited visibility: an investigation into filter bubbles
Authors:
Andre L. M. Vilela,
Luiz Felipe C. Pereira,
Laercio Dias,
H. Eugene Stanley,
Luciano R. da Silva
Abstract:
The dynamics of opinion formation in a society is a complex phenomenon where many variables play an important role. Recently, the influence of algorithms to filter which content is fed to social networks users has come under scrutiny. Supposedly, the algorithms promote marketing strategies, but can also facilitate the formation of filters bubbles in which a user is most likely exposed to opinions…
▽ More
The dynamics of opinion formation in a society is a complex phenomenon where many variables play an important role. Recently, the influence of algorithms to filter which content is fed to social networks users has come under scrutiny. Supposedly, the algorithms promote marketing strategies, but can also facilitate the formation of filters bubbles in which a user is most likely exposed to opinions that conform to their own. In the two-state majority-vote model an individual adopts an opinion contrary to the majority of its neighbors with probability $q$, defined as the noise parameter. Here, we introduce a visibility parameter $V$ in the dynamics of the majority-vote model, which equals the probability of an individual ignoring the opinion of each one of its neighbors. For $V=0.5$ each individual will, on average, ignore the opinion of half of its neighboring nodes. We employ Monte Carlo simulations to calculate the critical noise parameter as a function of the visibility $q_c(V)$ and obtain the phase diagram of the model. We find that the critical noise is an increasing function of the visibility parameter, such that a lower value of $V$ favors dissensus. Via finite-size scaling analysis we obtain the critical exponents of the model, which are visibility-independent, and show that the model belongs to the Ising universality class. We compare our results to the case of a network submitted to a static site dilution, and find that the limited visibility model is a more subtle way of inducing opinion polarization in a social network.
△ Less
Submitted 31 August, 2020; v1 submitted 26 August, 2020;
originally announced August 2020.
-
Probing the Electronic Properties of Monolayer MoS$_2$ via Interaction with Molecular Hydrogen
Authors:
Natália P. Rezende,
Alisson R. Cadore,
Andreij C. Gadelha,
Cíntia L. Pereira,
Vinicius Ornelas,
Kenji Watanabe,
Takashi Taniguchi,
André S. Ferlauto,
Ângelo Malachias,
Leonardo C. Campos,
Rodrigo G. Lacerda
Abstract:
This work presents a detailed experimental investigation of the interaction between molecular hydrogen (H$_2$) and monolayer MoS$_2$ field effect transistors (MoS$_2$ FET), aiming for sensing application. The MoS$_2$ FET exhibits a response to H$_2$ that covers a broad range of concentration (0.1 - 90%) at a relatively low operating temperature range (300-473 K). Most important, H$_2$ sensors base…
▽ More
This work presents a detailed experimental investigation of the interaction between molecular hydrogen (H$_2$) and monolayer MoS$_2$ field effect transistors (MoS$_2$ FET), aiming for sensing application. The MoS$_2$ FET exhibits a response to H$_2$ that covers a broad range of concentration (0.1 - 90%) at a relatively low operating temperature range (300-473 K). Most important, H$_2$ sensors based on MoS$_2$ FETs show desirable properties such as full reversibility and absence of catalytic metal dopants (Pt or Pd). The experimental results indicate that the conductivity of MoS$_2$ monotonically increases as a function of the H$_2$ concentration due to a reversible charge transferring process. It is proposed that such process involves dissociative H$_2$ adsorption driven by interaction with sulfur vacancies in the MoS$_2$ surface (VS). This description is in agreement with related density functional theory studies about H$_2$ adsorption on MoS$_2$. Finally, measurements on partially defect-passivated MoS$_2$ FETs using atomic layer deposited aluminum oxide consist of an experimental indication that the VS plays an important role in the H$_2$ interaction with the MoS$_2$. These findings provide insights for futures applications in catalytic process between monolayer MoS$_2$ and H$_2$ and also introduce MoS$_2$ FETs as promising H$_2$ sensors.
△ Less
Submitted 4 March, 2020;
originally announced March 2020.
-
Reversible doping of graphene field effect transistors by molecular hydrogen: the role of the metal/graphene interface
Authors:
C. L. Pereira,
A. R. Cadore,
N. P. Rezende,
A. Gadelha,
E. A. Soares,
H. Chacham,
L. C. Campos,
R. G. Lacerda
Abstract:
In this work, we present an investigation regarding how and why molecular hydrogen changes the electronic properties of graphene field effect transistors. We demonstrate that interaction with H2 leads to local doping of graphene near of the graphene-contact heterojunction. We also show that such interaction is strongly dependent on the characteristics of the metal-graphene interface. By changing t…
▽ More
In this work, we present an investigation regarding how and why molecular hydrogen changes the electronic properties of graphene field effect transistors. We demonstrate that interaction with H2 leads to local doping of graphene near of the graphene-contact heterojunction. We also show that such interaction is strongly dependent on the characteristics of the metal-graphene interface. By changing the type metal in the contact, we observe that Ohmic contacts can be strongly or weakly electrostatically coupled with graphene. For strongly coupled contacts, the signature of the charge transfer effect promoted by the contacts results on an asymmetric ambipolar conduction, and such asymmetry can be tunable under interaction with H2. On the other hand, for contacts weakly coupled with graphene, the hydrogen interaction has a more profound effect. In such situation, the devices show a second charge neutrality point in graphene transistor transfer curves (a double-peak response) upon H2 exposure. We propose that this double-peak phenomenon arises from the decoupling of the work function of graphene and that of the metallic electrodes induced by the H2 molecules. We also show that the gas-induced modifications at the metal-graphene interface can be exploited to create a controlled graphene p-n junction, with considerable electron transfer to graphene layer and significant variation in the graphene resistance. These effects can pave the way for a suitable metallic contact engineering providing great potential for the application of such devices as gas sensors.
△ Less
Submitted 4 March, 2020;
originally announced March 2020.
-
Multi-core fiber integrated multi-port beamsplitters for quantum information processing
Authors:
J. Cariñe,
G. Cañas,
P. Skrzypczyk,
I. Šupić,
N. Guerrero,
T. Garcia,
L. Pereira,
M. A. S. Prosser,
G. B. Xavier,
A. Delgado,
S. P. Walborn,
D. Cavalcanti,
G. Lima
Abstract:
Multi-port beamsplitters are cornerstone devices for high-dimensional quantum information tasks, which can outperform the two-dimensional ones. Nonetheless, the fabrication of such devices has been proven to be challenging with progress only recently achieved with the advent of integrated photonics. Here, we report on the production of high-quality $N \times N$ (with $N=4,7$) multi-port beamsplitt…
▽ More
Multi-port beamsplitters are cornerstone devices for high-dimensional quantum information tasks, which can outperform the two-dimensional ones. Nonetheless, the fabrication of such devices has been proven to be challenging with progress only recently achieved with the advent of integrated photonics. Here, we report on the production of high-quality $N \times N$ (with $N=4,7$) multi-port beamsplitters based on a new scheme for manipulating multi-core optical fibers. By exploring their compatibility with optical fiber components, we create 4-dimensional quantum systems and implement the measurement-device-independent random number generation task with a programmable 4-arm interferometer operating at a 2 MHz repetition rate. Thanks to the high visibilities observed, we surpass the 1-bit limit of binary protocols and attain 1.23 bits of certified private randomness per experimental round. Our result demonstrates that fast switching, low-loss and high optical quality for high-dimensional quantum information can be simultaneously achieved with multi-core fiber technology.
△ Less
Submitted 20 May, 2020; v1 submitted 29 January, 2020;
originally announced January 2020.
-
An open-source tool for automated planning of overlapping ablation zones for percutaneous renal tumor treatment
Authors:
A. M. Franz,
B. J. Mittmann,
J. Roeser,
B. Schmidberger,
M. Meinke,
P. L. Pereira,
H. U. Kauczor,
G. M. Richter,
C. M. Sommer
Abstract:
Percutaneous thermal ablation is a minimally-invasive treatment option for renal cancer. To treat larger tumours, multiple overlapping ablations zones are required. Arrangements with a low number of ablation zones but coverage of the whole tumour volume are challenging to find for physicians. In this work, an open-source software tool with a new planning approach based on the automatic selection f…
▽ More
Percutaneous thermal ablation is a minimally-invasive treatment option for renal cancer. To treat larger tumours, multiple overlapping ablations zones are required. Arrangements with a low number of ablation zones but coverage of the whole tumour volume are challenging to find for physicians. In this work, an open-source software tool with a new planning approach based on the automatic selection from a large number of randomized geometrical arrangements is presented. Two uncertainty parameters are introduced to account for tissue shrinking and tolerance of non-ablated tumour volume. For seven clinical renal T1a, T1b and T2a tumours, ablation plans were proposed by the software. All proposals are comparable to manual plans of an experienced physician with regard to the number of required ablation zones.
△ Less
Submitted 19 December, 2019;
originally announced December 2019.
-
New and fast route to black TiO2 based on hollow cathode H2 plasma
Authors:
A. Godoy Jr,
A. L. J. Pereira,
M. C. Gome,
R. S. Pessoa,
D. M. G. Leite,
G. Petraconi Filho,
W. Miyakawa,
A S. da Silva Sobrinho
Abstract:
In this work, we demonstrate a new method to produce black TiO2 from pristine anatase TiO2 films. It consists on the immersion of TiO2 films in a hollow cathode H2 RF plasma for a few minutes, resulting in an efficient blackening of TiO2. In this study, the pristine anatase TiO2 films were grown by magnetron sputtering onto cover glass and c-Si substrates and then annealed at 450 °C for 2 h. Befor…
▽ More
In this work, we demonstrate a new method to produce black TiO2 from pristine anatase TiO2 films. It consists on the immersion of TiO2 films in a hollow cathode H2 RF plasma for a few minutes, resulting in an efficient blackening of TiO2. In this study, the pristine anatase TiO2 films were grown by magnetron sputtering onto cover glass and c-Si substrates and then annealed at 450 °C for 2 h. Before and after the hollow cathode H2 plasma treatment, the samples were characterized by profilometry, UV-Vis spectrophotometry, X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, field emission scanning electron and atomic force microscopies, and four-point probe measurements. The results show that the obtained black TiO2 thin films have a significant light absorption on the whole solar spectrum, a very low sheet resistance, and also a relatively high surface area when compared to the pristine TiO2. All these characteristics lead to an important improvement on their photocatalytic activity, as measured by the degradation rate of methylene blue under UV irradiation.
△ Less
Submitted 10 September, 2019;
originally announced September 2019.
-
To regulate or not: a social dynamics analysis of the race for AI supremacy
Authors:
The Anh Han,
Luis Moniz Pereira,
Francisco C. Santos,
Tom Lenaerts
Abstract:
Rapid technological advancements in AI as well as the growing deployment of intelligent technologies in new application domains are currently driving the competition between businesses, nations and regions. This race for technological supremacy creates a complex ecology of choices that may lead to negative consequences, in particular, when ethical and safety procedures are underestimated or even i…
▽ More
Rapid technological advancements in AI as well as the growing deployment of intelligent technologies in new application domains are currently driving the competition between businesses, nations and regions. This race for technological supremacy creates a complex ecology of choices that may lead to negative consequences, in particular, when ethical and safety procedures are underestimated or even ignored. As a consequence, different actors are urging to consider both the normative and social impact of these technological advancements. As there is no easy access to data describing this AI race, theoretical models are necessary to understand its dynamics, allowing for the identification of when, how and which procedures need to be put in place to favour outcomes beneficial for all. We show that, next to the risks of setbacks and being reprimanded for unsafe behaviour, the time-scale in which AI supremacy can be achieved plays a crucial role. When this supremacy can be achieved in a short term, those who completely ignore the safety precautions are bound to win the race but at a cost to society, apparently requiring regulatory actions. Our analysis reveals that blindly imposing regulations may not have anticipated effect as only for specific conditions a dilemma arises between what individually preferred and globally beneficial. Similar observations can be made for the long-term development case. Yet different from the short term situation, certain conditions require the promotion of risk-taking as opposed to compliance to safety regulations in order to improve social welfare. These results remain robust when two or several actors are involved in the race and when collective rather than individual setbacks are produced by risk-taking behaviour. When defining codes of conduct and regulatory policies for AI, a clear understanding about the time-scale of the race is required.
△ Less
Submitted 16 January, 2020; v1 submitted 26 July, 2019;
originally announced July 2019.
-
Thermoelectric Properties of BiSbTe Alloy Nanofilms Produced by DC Sputtering: Experiments and Modeling
Authors:
Andre A. Marinho,
Neymar P. Costa,
Luiz Felipe C. Pereira,
Francisco A. Brito,
Carlos Chesman
Abstract:
Thermoelectricity refers to the conversion of thermal energy into electrical energy and vice-versa, which relies on three main effects: Seebeck, Peltier and Thomson, all of which are manifestations of heat and electricity flow. In this work we investigate the deposition of nanometric films and the effect of a thermal treatment on their thermoelectric properties. The films are based on BiSbT e tern…
▽ More
Thermoelectricity refers to the conversion of thermal energy into electrical energy and vice-versa, which relies on three main effects: Seebeck, Peltier and Thomson, all of which are manifestations of heat and electricity flow. In this work we investigate the deposition of nanometric films and the effect of a thermal treatment on their thermoelectric properties. The films are based on BiSbT e ternary alloys, obtained by deposition on a substrate using the DC sputtering technique. We produced sputtering targets with repurposed materials from commercial thermoelectric modules. In this way, we explore an environmentally responsible destination for discarded devices, with in situ preparation and manufacture of film-based thermoelectric modules. Film samples show an improvement trend in thermoelectric efficiency as the annealing temperature is increased in the range 423-623 K. The experimental data regarding thermal conductivity, electrical resistivity (or electrical conductivity), and the Seebeck coefficient were analyzed with the theory of q-deformed algebra. Applying a q-deformation to our system we can model the effect of the annealing temperature on the thermal and electrical conductivities, as well as the Seebeck coefficient, and argue that the q-factor must be related to structural properties of the films. We believe that our work could pave the way for future developments in the modeling of experimental measurements via the formalism of q-deformation algebra.
△ Less
Submitted 24 July, 2019;
originally announced July 2019.
-
Syntgen: A system to generate temporal networks with user specified topology
Authors:
Luis Ramada Pereira,
Rui J. Lopes,
Jorge Louçã
Abstract:
Network representations can help reveal the behavior of complex systems. Useful information can be derived from the network properties and invariants, such as components, clusters or cliques, as well as from their changes over time. The evolution of clusters of nodes (or communities) is one of the major focus of research. However, the time dimension increases complexity, introducing new constructs…
▽ More
Network representations can help reveal the behavior of complex systems. Useful information can be derived from the network properties and invariants, such as components, clusters or cliques, as well as from their changes over time. The evolution of clusters of nodes (or communities) is one of the major focus of research. However, the time dimension increases complexity, introducing new constructs and requiring novel and enhanced algorithms. In spite of recent improvements, the relative scarcity of timestamped representations of empiric networks, with known ground truth, hinders algorithm validation. A few approaches have been proposed to generate synthetic temporal networks that conform to static topological specifications while in general adopting an ad-hoc approach to temporal evolution. We believe there is still a need for a principled synthetic network generator that conforms to problem domain topological specifications from a static as well as temporal perspective. Here we present such a system. The unique attributes of our system include accepting arbitrary node degree and cluster size distributions and temporal evolution under user control, while supporting tunable joint distribution and temporal correlation of node degrees. Theoretical contributions include the analysis of conditions for "graphability" of sequences of inter and intra cluster node degrees and cluster sizes and the development of a heuristic to search for the cluster membership of nodes that minimizes the shared information distance between clusterings. Our work shows that this system is capable of generating networks under user controlled topology with up to thousands of nodes and hundreds of clusters with strong topology adherence. Much larger networks are possible with relaxed requirements. The generated networks support algorithm validation as well as problem domain analysis.
△ Less
Submitted 14 March, 2019;
originally announced March 2019.
-
Associative Integrator
Authors:
J. Avellar,
L. G. S. Duarte,
A. Fraga,
L. A. C. P. da Mota,
L. F. de Oliveira,
L. O. Pereira
Abstract:
Dynamic systems have a fundamental relevance in the description of physical phenomena. The search for more accurate and faster numerical integration methods for the resolution of such systems is, therefore, an important topic of research. The present work introduces a new approach for the numerical integration of dynamic systems. We propose an association of numerical integration methods (integrat…
▽ More
Dynamic systems have a fundamental relevance in the description of physical phenomena. The search for more accurate and faster numerical integration methods for the resolution of such systems is, therefore, an important topic of research. The present work introduces a new approach for the numerical integration of dynamic systems. We propose an association of numerical integration methods (integrators) in order to optimize the performance. The standard we apply is the balance of the duo : precision obtained x running time. The numerical integration methods we have chosen, for this particular instance of association, were the Runge-Kutta of fourth order and seventheighth order. The algorithm was implemented in C++ language. The results showed an improvement in accuracy over the lower grade numerical integrator (actually, we have achieved, basically, the precision of the top integrator) with a processing time performance closer to the one of the lower grade integrator. Similar results can be obtained for other pairs of numerical integration methods.
△ Less
Submitted 13 May, 2019; v1 submitted 25 November, 2018;
originally announced November 2018.
-
Fundamental limits to quantum channel discrimination
Authors:
Stefano Pirandola,
Riccardo Laurenza,
Cosmo Lupo,
Jason L. Pereira
Abstract:
What is the ultimate performance for discriminating two arbitrary quantum channels acting on a finite-dimensional Hilbert space? Here we address this basic question by deriving a general and fundamental lower bound. More precisely, we investigate the symmetric discrimination of two arbitrary qudit channels by means of the most general protocols based on adaptive (feedback-assisted) quantum operati…
▽ More
What is the ultimate performance for discriminating two arbitrary quantum channels acting on a finite-dimensional Hilbert space? Here we address this basic question by deriving a general and fundamental lower bound. More precisely, we investigate the symmetric discrimination of two arbitrary qudit channels by means of the most general protocols based on adaptive (feedback-assisted) quantum operations. In this general scenario, we first show how port-based teleportation can be used to simplify these adaptive protocols into a much simpler non-adaptive form, designing a new type of teleportation stretching. Then, we prove that the minimum error probability affecting the channel discrimination cannot beat a bound determined by the Choi matrices of the channels, establishing a general, yet computable formula for quantum hypothesis testing. As a consequence of this bound, we derive ultimate limits and no-go theorems for adaptive quantum illumination and single-photon quantum optical resolution. Finally, we show how the methodology can also be applied to other tasks, such as quantum metrology, quantum communication and secret key generation.
△ Less
Submitted 5 June, 2019; v1 submitted 7 March, 2018;
originally announced March 2018.
-
Borophene hydride: a stiff 2D material with high thermal conductivity and attractive optical and electronic properties
Authors:
Bohayra Mortazavi,
Meysam Makaremi,
Masoud Shahrokhi,
Mostafa Raeisi,
Chandra Veer Singh,
Timon Rabczuk,
Luiz Felipe C Pereira
Abstract:
Two-dimensional (2D) structures of boron atoms so called borophene, have recently attracted remarkable attention. In a latest exciting experimental study, a hydrogenated borophene structure was realized. Motivated by this success, we conducted extensive first-principles calculations to explore the mechanical, thermal conduction, electronic and optical responses of borophene hydride. The mechanical…
▽ More
Two-dimensional (2D) structures of boron atoms so called borophene, have recently attracted remarkable attention. In a latest exciting experimental study, a hydrogenated borophene structure was realized. Motivated by this success, we conducted extensive first-principles calculations to explore the mechanical, thermal conduction, electronic and optical responses of borophene hydride. The mechanical response of borophene hydride was found to be anisotropic in which it can yield an elastic modulus of 131 N/m and a high tensile strength of 19.9 N/m along the armchair direction. Notably, it was shown that by applying mechanical loading the metallic electronic character of borophene hydride can be altered to direct band-gap semiconducting, very appealing for the application in nanoelectronics. The absorption edge of the imaginary part of the dielectric function was found to occur in the visible range of light for parallel polarization. Finally, it was estimated that this novel 2D structure at the room temperature can exhibit high thermal conductivities of 335 W/mK and 293 W/mK along zigzag and armchair directions, respectively. Our study confirms that borophene hydride benefits an outstanding combination of interesting mechanical, electronic, optical and thermal conduction properties, promising for the design of novel nanodevices.
△ Less
Submitted 17 January, 2018;
originally announced January 2018.
-
Spectral Calibration of the Fluorescence Telescopes of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz
, et al. (381 additional authors not shown)
Abstract:
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator.…
▽ More
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator. Different sets of telescopes in the observatory have different optical components, and the eight telescopes measured represent two each of the four combinations of components represented in the observatory. We made an end-to-end measurement of the response from different combinations of optical components, and the monochromator setup allowed for more precise and complete measurements than our previous multi-wavelength calibrations. We find an overall uncertainty in the calibration of the spectral response of most of the telescopes of 1.5% for all wavelengths; the six oldest telescopes have larger overall uncertainties of about 2.2%. We also report changes in physics measureables due to the change in calibration, which are generally small.
△ Less
Submitted 2 October, 2017; v1 submitted 5 September, 2017;
originally announced September 2017.
-
Orbital angular momentum mixing in type II second harmonic generation
Authors:
Leonardo J. Pereira,
Wagner T. Buono,
Daniel S. Tasca,
Kaled Dechoum,
Antonio Z. Khoury
Abstract:
We investigate the non linear mixing of orbital angular momentum in type II second harmonic generation with arbitrary topological charges imprinted on two orthogonally polarized beams. Starting from the basic nonlinear equations for the interacting fields, we derive the selection rules determining the set of paraxial modes taking part in the interaction. Conservation of orbital angular momentum na…
▽ More
We investigate the non linear mixing of orbital angular momentum in type II second harmonic generation with arbitrary topological charges imprinted on two orthogonally polarized beams. Starting from the basic nonlinear equations for the interacting fields, we derive the selection rules determining the set of paraxial modes taking part in the interaction. Conservation of orbital angular momentum naturally appears as the topological charge selection rule. However, a less intuitive rule applies to the radial orders when modes carrying opposite helicities are combined in the nonlinear crystal, an intriguing feature confirmed by experimental measurements.
△ Less
Submitted 19 July, 2017;
originally announced July 2017.
-
Amorphized graphene: A stiff material with low thermal conductivity
Authors:
B Mortazavi,
Z Fan,
LFC Pereira,
A Harju,
T Rabczuk
Abstract:
All-carbon heterostructures have been produced recently via focused ion beam patterning of single layer graphene. Amorphized graphene is similar to a graphene sheet in which some hexagons are replaced by a combination of pentagonal, heptagonal and octagonal rings. The present investigation provides a general view regarding phonon and load transfer along amorphous graphene. The developed models for…
▽ More
All-carbon heterostructures have been produced recently via focused ion beam patterning of single layer graphene. Amorphized graphene is similar to a graphene sheet in which some hexagons are replaced by a combination of pentagonal, heptagonal and octagonal rings. The present investigation provides a general view regarding phonon and load transfer along amorphous graphene. The developed models for the evaluation of mechanical and thermal conductivity properties yield accurate results for pristine graphene and acquired findings for amorphized graphene films are size independent. Our atomistic results show that amorphous graphene sheets could exhibit a remarkably high elastic modulus of ~500 GPa and tensile strengths of ~50 GPa at room temperature. However, our results show that mechanical properties of amorphous graphene decline at higher temperatures. Furthermore, we show that amorphized graphene present a low thermal conductivity ~15 W/mK which is two orders of magnitude smaller than pristine graphene, and we verify that its thermal conductivity is almost insensitive to temperature since it is dominated by phonon-defect scattering rather than phonon-phonon scattering. Finally, our results show that amorphized graphene structures present a remarkably high elastic modulus and mechanical strength, along with a low thermal conductivity, which is an unusual combination for carbon-based materials.
△ Less
Submitted 17 March, 2017;
originally announced March 2017.
-
Muon Counting using Silicon Photomultipliers in the AMIGA detector of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu
, et al. (400 additional authors not shown)
Abstract:
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is com…
▽ More
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is composed of three scintillation modules, with a 10 m$^2$ detection area per module. In this paper, a new generation of detectors, replacing the current multi-pixel photomultiplier tube (PMT) with silicon photo sensors (aka. SiPMs), is proposed. The selection of the new device and its front-end electronics is explained. A method to calibrate the counting system that ensures the performance of the detector is detailed. This method has the advantage of being able to be carried out in a remote place such as the one where the detectors are deployed. High efficiency results, i.e. 98 % efficiency for the highest tested overvoltage, combined with a low probability of accidental counting ($\sim$2 %), show a promising performance for this new system.
△ Less
Submitted 4 October, 2017; v1 submitted 17 March, 2017;
originally announced March 2017.
-
Iterative reconstruction of SiPM light response functions in a square-shaped compact gamma camera
Authors:
A. Morozov,
F. Alves,
J. Marcos,
R. Martins,
L. Pereira,
V. Solovov,
V. Chepel
Abstract:
Compact gamma cameras with a square-shaped monolithic scintillator crystal and an array of silicon photomultipliers (SiPMs) are actively being developed for applications in areas such as small animal imaging, cancer diagnostics and radiotracer guided surgery. Statistical methods of position reconstruction, which are potentially superior to the traditional centroid method, require accurate knowledg…
▽ More
Compact gamma cameras with a square-shaped monolithic scintillator crystal and an array of silicon photomultipliers (SiPMs) are actively being developed for applications in areas such as small animal imaging, cancer diagnostics and radiotracer guided surgery. Statistical methods of position reconstruction, which are potentially superior to the traditional centroid method, require accurate knowledge of the spatial response of each photomultiplier. Using both Monte Carlo simulations and experimental data obtained with a camera prototype, we show that the spatial response of all photomultipliers (light response functions) can be parameterized with axially symmetric functions obtained iteratively from flood field irradiation data. The study was performed with a camera prototype equipped with a 30 x 30 x 2 mm3 LYSO crystal and an 8 x 8 array of SiPMs for 140 keV gamma rays. The simulations demonstrate that the images, reconstructed with the maximum likelihood method using the response obtained with the iterative approach, exhibit only minor distortions: the average difference between the reconstructed and the true positions in X and Y directions does not exceed 0.2 mm in the central area of 22 x 22 mm2 and 0.4 mm at the periphery of the camera. A similar level of image distortions is shown experimentally with the camera prototype.
△ Less
Submitted 9 October, 2016;
originally announced October 2016.
-
Emulation workbench for position sensitive gaseous scintillation detectors
Authors:
L. Pereira,
L. M. S. Margato,
A. Morozov,
V. Solovov,
F. A. F. Fraga
Abstract:
Position sensitive detectors based on gaseous scintillation proportional counters with Anger-type readout are being used in several research areas such as neutron detection, search for dark matter and neutrinoless double beta decay. Design and optimization of such detectors are complex and time consuming tasks. Simulations, while being a powerful tool, strongly depend on the light transport models…
▽ More
Position sensitive detectors based on gaseous scintillation proportional counters with Anger-type readout are being used in several research areas such as neutron detection, search for dark matter and neutrinoless double beta decay. Design and optimization of such detectors are complex and time consuming tasks. Simulations, while being a powerful tool, strongly depend on the light transport models and demand accurate knowledge of many parameters, which are often not available. Here we describe an alternative approach based on the experimental evaluation of a detector using an isotropic point-like light source with precisely controllable light emission properties, installed on a 3D positioning system. The results obtained with the developed setup at validation conditions, when the scattered light is strongly suppressed, show good agreement with simulations.
△ Less
Submitted 13 October, 2015;
originally announced October 2015.
-
Force and heat current formulas for many-body potentials in molecular dynamics simulation with applications to thermal conductivity calculations
Authors:
Zheyong Fan,
Luiz Felipe C. Pereira,
Hui-Qiong Wang,
Jin-Cheng Zheng,
Davide Donadio,
Ari Harju
Abstract:
We derive expressions of interatomic force and heat current for many-body potentials such as the Tersoff, the Brenner, and the Stillinger-Weber potential used extensively in molecular dynamics simulations of covalently bonded materials. Although these potentials have a many-body nature, a pairwise force expression that follows Newton's third law can be found without referring to any partition of t…
▽ More
We derive expressions of interatomic force and heat current for many-body potentials such as the Tersoff, the Brenner, and the Stillinger-Weber potential used extensively in molecular dynamics simulations of covalently bonded materials. Although these potentials have a many-body nature, a pairwise force expression that follows Newton's third law can be found without referring to any partition of the potential. Based on this force formula, a stress applicable for periodic systems can be unambiguously defined. The force formula can then be used to derive the heat current formulas using a natural potential partitioning. Our heat current formulation is found to be equivalent to most of the seemingly different heat current formulas used in the literature, but to deviate from the stress-based formula derived from two-body potential. We validate our formulation numerically on various systems descried by the Tersoff potential, namely three-dimensional silicon and diamond, two-dimensional graphene, and quasi-one-dimensional carbon nanotube. The effects of cell size and time used in the simulation are examined.
△ Less
Submitted 23 March, 2015;
originally announced March 2015.
-
Correlação de longa-duração e analíse bayesiana da evolução temporal dos terremotos ao longo da falha de samambaia, nordeste do brasil
Authors:
D. B. de Freitas,
G. S. França,
L. L. S. Pereira,
L. S. Pedro,
M. G. N. Atanazio,
C. S. Vilar
Abstract:
A Bayesian approach is adopted to analyze the sequence of seismic events and their magnitudes near João Câmara which occurred mainly from 1983 to 1998 along the Samambaia fault. In this work, we choose a Bayesian model for the process of occurrence times conditional on the observed magnitude values following the same procedure suggested by Stavrakakis and Tselentis (1987). The model parameters are…
▽ More
A Bayesian approach is adopted to analyze the sequence of seismic events and their magnitudes near João Câmara which occurred mainly from 1983 to 1998 along the Samambaia fault. In this work, we choose a Bayesian model for the process of occurrence times conditional on the observed magnitude values following the same procedure suggested by Stavrakakis and Tselentis (1987). The model parameters are determined on the basis of historical and physical information. We generate posterior samples from the joint posterior distribution of the model parameters by using a variant of the Metropolis-Hastings algorithm. We use the results in a variety of ways, including the construction of pointwise posterior confidence bands for the conditional intensity of the point process as a function of time, as well as, a posterior distribuition as a function of the mean of occurrence per unit time.
△ Less
Submitted 20 June, 2013;
originally announced June 2013.
