Showing 1–19 of 19 results for author: Pellegrino, L

Ink-jet printing and drop-casting deposition of 2H-phase SnSe$_2$ and WSe$_2$ nanoflake assemblies for thermoelectric applications

Authors: B. Patil, C. Bernini, D. Marre', L. Pellegrino, I. Pallecchi

Abstract: The development of simple, scalable, and cost-effective methods to prepare Van der Waals materials for thermoelectric applications is a timely research field, whose potential and possibilities are still largely unexplored. In this work, we present a systematic study of ink-jet printing and drop-casting deposition of 2H-phase SnSe and WSe$_2$ nanoflake assemblies, obtained by liquid phase exfoliati… ▽ More The development of simple, scalable, and cost-effective methods to prepare Van der Waals materials for thermoelectric applications is a timely research field, whose potential and possibilities are still largely unexplored. In this work, we present a systematic study of ink-jet printing and drop-casting deposition of 2H-phase SnSe and WSe$_2$ nanoflake assemblies, obtained by liquid phase exfoliation, and their characterization in terms of electronic and thermoelectric properties. The choice of optimal annealing temperature and time is crucial for preserving phase purity and stoichiometry and for removing dry residues of ink solvents at inter-flake boundaries, while maximizing the sintering of nanoflakes. An additional pressing is beneficial to improve nanoflake orientation and packing, thus enhancing electric conductivity. In nanoflake assemblies deposited by drop casting and pressed at 1 GPa, we obtained thermoelectric power factors at room temperature up to $2.2\times 10^{-4}$ mW m$^{-1}$ K$^{-2}$ for SnSe$_2$ and up to $3.0\times 10^{-4}$ mW m$^{-1}$ K$^{-2}$ for WSe$_2$. △ Less

Submitted 18 February, 2025; originally announced February 2025.

Journal ref: Nanotechnology 33, 035302 (2022)

Magnetic Trampoline Resonators from (La,Sr)MnO3 Single-Crystal Thin Films

Authors: Nicola Manca, Dhavalkumar Mungpara, Leonélio Cichetto Jr., Alejandro E. Plaza, Gianrico Lamura, Alexander Schwarz, Daniele Marré, Luca Pellegrino

Abstract: Micro-electro-mechanical resonators employing a magnetic element have been proposed for magnetic field sensing applications, but the integration of magnetic materials with standard semiconductor compounds is challenging and requires complex fabrication protocols. We present a different approach relying on (La0.7,Sr0.3)MnO3 (LSMO), an oxide compound that works both as structural element for the res… ▽ More Micro-electro-mechanical resonators employing a magnetic element have been proposed for magnetic field sensing applications, but the integration of magnetic materials with standard semiconductor compounds is challenging and requires complex fabrication protocols. We present a different approach relying on (La0.7,Sr0.3)MnO3 (LSMO), an oxide compound that works both as structural element for the resonator and functional magnetic layer. Suspended trampolines are realized in a single step process from LSMO thin films and show quality factor up to 60k and fQ products reaching 10$^{10}$ Hz. Their magnetic properties are probed by a SQUID magnetometer and magnetic force microscopy, showing saturation magnetization of 240 kA/m at room temperature and in-plane magnetic domains with coercivity of 2.5 mT. Being entirely made from a magnetic material, these resonators exhibit a larger magnetic interaction volume compared to other solutions, making them ideal candidates as building blocks for high-sensitivity magnetic field sensors. △ Less

Submitted 21 January, 2025; originally announced January 2025.

Comments: 7 pages, 4 figures, 2 supporting sections

Oxide Membranes from Bulk Micro-Machining of SrTiO$_3$ substrates

Authors: Nicola Manca, Alejandro Enrique Plaza, Leonélio Cichetto Jr., Warner J. Venstra, Cristina Bernini, Daniele Marré, Luca Pellegrino

Abstract: Suspended micro-structures based on complex oxides relies on surface micro-machining processes such as those based on sacrificial layers. These processes prevent to physically access the microstructures from both sides, as substantial part of the substrate is not removed. In this work, we develop a bulk micromachining protocol of a commonly used substrate employed in oxide thin film deposition. We… ▽ More Suspended micro-structures based on complex oxides relies on surface micro-machining processes such as those based on sacrificial layers. These processes prevent to physically access the microstructures from both sides, as substantial part of the substrate is not removed. In this work, we develop a bulk micromachining protocol of a commonly used substrate employed in oxide thin film deposition. We realize suspended oxide thin film devices by fabricating pass-through holes across SrTiO$_3$(100) or SrTiO$_3$(110) substrates. Careful calibration of anisotropic etching rates allows controlling the final geometry of the aperture in the substrate in a predictable way. As demonstrators of possible device geometries, we present clamped membranes and trampolines of (La,Sr)MnO$_3$, a conductive magnetic oxide, and a suspended trampoline resonator carved from the SrTiO$_3$ substrate itself. Reported protocols can be readily extended to a broad variety of other complex oxides so to extend the application of membranes technology beyond those of commercially-available silicon compounds. △ Less

Submitted 9 May, 2025; v1 submitted 9 October, 2024; originally announced October 2024.

Journal ref: Adv. Sci. 2025, 2412683

Integration of High-Tc Superconductors with High Q Factor Oxide Mechanical Resonators

Authors: Nicola Manca, Alexei Kalaboukhov, Alejandro E. Plaza, Leonélio Cichetto Jr, Emilio Bellingeri, Francesco Bisio, Floriana Lombardi, Daniele Marré, Luca Pellegrino

Abstract: Micro-mechanical resonators are building blocks of a variety of applications in basic science and applied electronics. This device technology is mainly based on well-established and reproducible silicon-based fabrication processes with outstanding performances in term of mechanical Q factor and sensitivity to external perturbations. Broadening the functionalities of MEMS by the integration of func… ▽ More Micro-mechanical resonators are building blocks of a variety of applications in basic science and applied electronics. This device technology is mainly based on well-established and reproducible silicon-based fabrication processes with outstanding performances in term of mechanical Q factor and sensitivity to external perturbations. Broadening the functionalities of MEMS by the integration of functional materials is a key step for both applied and fundamental science. However, combining functional materials and silicon-based compounds is challenging. An alternative approach is fabricating MEMS based on complex heterostructures made of materials inherently showing a variety of physical properties such as transition metal oxides. Here, we report on the integration of a high-Tc superconductor YBa2Cu3O7 (YBCO) with high Q factor micro-bridge resonator made of a single-crystal LaAlO3 (LAO) thin film. LAO resonators are tensile strained, with a stress of 345 MPa, show Q factor in the range of tens of thousands, and have low roughness. The topmost YBCO layer deposited by Pulse Laser Deposition shows a superconducting transition starting at 90 K with zero resistance below 78 K. This result opens new possibilities towards the development of advanced transducers, such as bolometers or magnetic field detectors, as well as basic science experiments in solid state physics, material science, and quantum opto-mechanics. △ Less

Submitted 23 January, 2024; originally announced January 2024.

Comments: 5 pages, 4 figures

Journal ref: Adv. Funct. Mater. 2024, 2403155

Sensing enhancement of a Fabry-Perot THz cavity using switchable VO2 mirrors

Authors: Gian Paolo Papari, Anna Lucia Pellegrino, Graziella Malandrino, Antonello Andreone

Abstract: We experimentally investigate the sensing properties of an open cavity operating in the THz regime and realized by employing as mirrors two thin vanadium dioxide (VO2) films grown on silicon parallel plates and separated by a variable length. The phase transition of VO2 is used to control the behavior of the system between two different responses: a high transmission mode to the incident radiation… ▽ More We experimentally investigate the sensing properties of an open cavity operating in the THz regime and realized by employing as mirrors two thin vanadium dioxide (VO2) films grown on silicon parallel plates and separated by a variable length. The phase transition of VO2 is used to control the behavior of the system between two different responses: a high transmission mode to the incident radiation (VO2 in the insulating state) and a high sensitivity to tiny changes in the cavity refractive index (VO2 in the conducting state). In the first state, the low loss regime enables to adjust the cavity length and easily optimize the resonances due to the Fabry-Perot (FP) effect in the Si plates and in the cavity volume. The activation of the metallic-like state instead, by damping the FP oscillations in the plates, promotes the onset of a comb-like spectrum that can be exploited as a versatile tool for accurate sensing applications. Using both an analytical model and full-wave simulations, we estimate the device response to variation in the refractive index of the cavity volume, showing that the proposed structure can achieve sensitivity values among the highest reported for THz sensors. △ Less

Submitted 2 February, 2022; originally announced February 2022.

STAR HE-Linac Complete Detailed Design Report

Authors: A. Bacci, L. Faillace, L. Pellegrino, D. Alesini, S. Bini, F. Cardelli, G. Catuscelli, F. Chiarelli, I. Drebot, A. Esposito, A. Gallo, A. Ghigo, D. Giannotti, V. Petrillo, L. Piersanti, E. Puppin, M. Rossetti Conti, L. Serafini, A. Stella, A. Vannozzi, S. Vescovi

Abstract: This Document contains a complete technical description of the system devoted to the upgrade of the STAR Linear Accelerator (STAR Linac). According to the Contract signed between Universita della Calabria (UniCal) and Istituto Nazionale di Fisica Nucleare (INFN) on May 7th, 2021, INFN is committed to install, test and commission the upgrade of the STAR Linac denominated STAR-HE-Linac (STAR High En… ▽ More This Document contains a complete technical description of the system devoted to the upgrade of the STAR Linear Accelerator (STAR Linac). According to the Contract signed between Universita della Calabria (UniCal) and Istituto Nazionale di Fisica Nucleare (INFN) on May 7th, 2021, INFN is committed to install, test and commission the upgrade of the STAR Linac denominated STAR-HE-Linac (STAR High Energy Linac), hereafter STAR-HEL. The technical components as well as the installation / test procedures and the ancillary equipment involved in such an upgrade are the object of this Document, named Complete Detailed Design Report. A technical offer was submitted by INFN in the frame of its participation to the tender issued by UniCal, describing a possible energy upgrade of the STAR Linac, with an electron beam energy boosted from 65 MeV up to 150 MeV by means of Radiofrequency (RF) accelerating sections and power stations based on S-band technology (ie, 2856 MHz RF frequency). Following the Contract signature, INFN conceived and conceptually designed a technology change that offers several advantages both on performances and on operational reliability of STAR-HEL, based on adopting C-band technology (ie, 5712 MHz RF frequency) for accelerating sections and RF power stations. Such a technology change was illustrated in a dedicated document named "improvement option for STAR-2 HE-Linac", addressed to UniCal STAR Management Board and tender R.U.P. for approval on June 9th, 2021. INFN received a formal letter of approval on June 16th, 2021. △ Less

Submitted 20 September, 2021; originally announced September 2021.

The role of etching anisotropy in the fabrication of freestanding oxide microstructures on SrTiO3(100), SrTiO3(110), and SrTiO3(111) substrates

Authors: Alejandro Plaza, Nicola Manca, Cristina Bernini, Daniele Marré, Luca Pellegrino

Abstract: The release process for the fabrication of freestanding oxide microstructures relies on appropriate, controllable and repeatable wet etching procedures. SrTiO3 is among the most employed substrates for oxide thin films growth and can be decomposed in HF:water solution. Such process is strongly anisotropic and is affected by local defects and substrate cut-plane. We analyze the etching behavior of… ▽ More The release process for the fabrication of freestanding oxide microstructures relies on appropriate, controllable and repeatable wet etching procedures. SrTiO3 is among the most employed substrates for oxide thin films growth and can be decomposed in HF:water solution. Such process is strongly anisotropic and is affected by local defects and substrate cut-plane. We analyze the etching behavior of SrTiO3 substrates having (100), (110), and (111) cut-planes during immersion in a 5% HF:water solution. The etching process over the three substrates is compared in terms of pitting, anisotropy, macroscopic etch rate and underetching effects around HF-resistant (La,Sr)MnO3 thin film micropatterns. The release of targeted structures, such as the reported (La,Sr)MnO3 freestanding microbridges, depends on the substrate crystallographic symmetry and on the in-plane orientation of the structures themselves along the planar directions. By comparing the etching evolution at two different length scales, we distinguish two regimes for the propagation of the etching front: an intrinsic one, owning to a specific lattice direction, and a macroscopic one, resulting from the mixing of different etching fronts. We report the morphologies of the etched SrTiO3 surfaces and the geometries of the underetched regions as well as of the microbridge clamping zones. The reported analysis will enable the design of complex MEMS devices by allowing to model the evolution of the etching process required for the release of arbitrary structures made of oxide thin films deposited on top of STO. △ Less

Submitted 20 July, 2021; originally announced July 2021.

Comments: 6 pages, 3 figures, 1 table, 4 supporting sections

Journal ref: Appl. Phys. Lett. 119, 033504 (2021)

Challenges for the interaction region design of the Future Circular Collider FCC-ee

Authors: Manuela Boscolo, Nicola Bacchetta, Michael Benedikt, Laurent Brunetti, Helmut Burkhardt, Andrea Ciarma, Mogens Dam, Francesco Fransesini, Mark Jones, Roberto Kersevan, Mike Koratzinos, Marian Lueckhof, Mauro Migliorati, Eva Montbarbon, Alexander Novokhatski, Katsunobu Oide, Luigi Pellegrino, Freddy Poirier, Maurizio Serluca, Michael K. Sullivan, Leonard Watrelot, Frank Zimmermann

Abstract: The FCC-ee is a proposed future high-energy, high-intensity and high-precision lepton collider. Here, we present the latest development for the FCC-ee interaction regions, which shall ensure optimum conditions for the particle physics experiments. We discuss measures of background reduction and a revised interaction region layout including a low impedance compact beam chamber design. We also discu… ▽ More The FCC-ee is a proposed future high-energy, high-intensity and high-precision lepton collider. Here, we present the latest development for the FCC-ee interaction regions, which shall ensure optimum conditions for the particle physics experiments. We discuss measures of background reduction and a revised interaction region layout including a low impedance compact beam chamber design. We also discuss the possible impact of the radiation generated in the interaction region including beamstrahlung. △ Less

Submitted 20 May, 2021; originally announced May 2021.

Comments: 3 pp, 5 figs, presented at IPAC21, May 24-28th, 2021

Report number: WEPAB029

KLASH Conceptual Design Report

Authors: D. Alesini, D. Babusci, P. Beltrame S. J., F. Björkeroth, F. Bossi, P. Ciambrone, G. Delle Monache, D. Di Gioacchino, P. Falferi, A. Gallo, C. Gatti, A. Ghigo, M. Giannotti, G. Lamanna, C. Ligi, G. Maccarrone, A. Mirizzi, D. Montanino, D. Moricciani, A. Mostacci, M. Mück, E. Nardi, F. Nguyen, L. Pellegrino, A. Rettaroli , et al. (4 additional authors not shown)

Abstract: The last decade witnessed an increasing interest in axions and axion-like particles with many theoretical works published and many new experimental proposals that started a real race towards their discovery. This paper is the Conceptual Design Report of the KLASH (KLoe magnet for Axion SearcH) experiment at the Laboratori Nazionali di Frascati (LNF). The idea of this experiment has been stimulated… ▽ More The last decade witnessed an increasing interest in axions and axion-like particles with many theoretical works published and many new experimental proposals that started a real race towards their discovery. This paper is the Conceptual Design Report of the KLASH (KLoe magnet for Axion SearcH) experiment at the Laboratori Nazionali di Frascati (LNF). The idea of this experiment has been stimulated by the availability of the large volume superconducting magnet, with a moderate magnetic field of 0.6 T, used in the KLOE detector at the DAFNE collider. The main conclusion we draw from this report is the possibility to build and put in operation at LNF in 2-3 years a large haloscope with the sensitivity to KSVZ axions in the low mass range between 0.2 and 1 $μ$eV, complementary to that of other experiments. Timeline and cost are competitive with respect to other proposals in the same mass region thanks to the availability of most of the infrastructure, in particular the superconducting magnet and the cryogenics plant. △ Less

Submitted 6 November, 2019; originally announced November 2019.

Report number: INFN-19-18/LNF

Positron driven muon source for a muon collider

Authors: D. Alesini, M. Antonelli, M. E. Biagini, M. Boscolo, O. R. Blanco-García, A. Ciarma, R. Cimino, M. Iafrati, A. Giribono, S. Guiducci, L. Pellegrino, M. Rotondo, C. Vaccarezza, A. Variola, A. Allegrucci, F. Anulli, M. Bauce, F. Collamati, G. Cavoto, G. Cesarini, F. Iacoangeli, R. Li Voti, A. Bacci, I. Drebot, P. Raimondi , et al. (33 additional authors not shown)

Abstract: The design of a future multi-TeV muon collider needs new ideas to overcome the technological challenges related to muon production, cooling, accumulation and acceleration. In this paper a layout of a positron driven muon source known as the Low EMittance Muon Accelerator (LEMMA) concept is presented. The positron beam, stored in a ring with high energy acceptance and low emittance, is extracted an… ▽ More The design of a future multi-TeV muon collider needs new ideas to overcome the technological challenges related to muon production, cooling, accumulation and acceleration. In this paper a layout of a positron driven muon source known as the Low EMittance Muon Accelerator (LEMMA) concept is presented. The positron beam, stored in a ring with high energy acceptance and low emittance, is extracted and driven to a multi-target system, to produce muon pairs at threshold. This solution alleviates the issues related to the power deposited and the integrated Peak Energy Density Deposition (PEDD) on the targets. Muons produced in the multi-target system will then be accumulated before acceleration and injection in the collider. A multi-target line lattice has been designed to cope with the focusing of both the positron and muon beams. Studies on the number, material and thickness of the targets have been carried out. A general layout of the overall scheme and a description is presented, as well as plans for future R&D. △ Less

Submitted 19 May, 2019; v1 submitted 14 May, 2019; originally announced May 2019.

Comments: 18 pages, 32 figures

The Klash Proposal: Status and Perspectives

Authors: C. Gatti, D. Alesini, D. Babusci, C. Braggio, G. Carugno, N. Crescini, D. Di Gioacchino, P. Falferi, G. Lamanna, C. Ligi, A. Ortolan, L. Pellegrino, A. Rettaroli, G. Ruoso, S. Tocci

Abstract: Recently some of the authors proposed a search for galactic axions with mass about 0.2~$μ$eV using a large volume resonant cavity, tens of cubic meters, cooled down to 4~K and immersed in a magnetic field of about 0.6~T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion Sear… ▽ More Recently some of the authors proposed a search for galactic axions with mass about 0.2~$μ$eV using a large volume resonant cavity, tens of cubic meters, cooled down to 4~K and immersed in a magnetic field of about 0.6~T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion SearcH), has a potential sensitivity on the axion-to-photon coupling, $g_{aγγ}$, of about $6\times10^{-17}$ $\mbox{GeV}^{-1}$, reaching the region predicted by KSVZ\cite{KSVZ} and DFSZ\cite{DFSZ} models of QCD axions. We report here the status of the project. △ Less

Submitted 16 November, 2018; originally announced November 2018.

Comments: Contributed to the 14th Patras Workshop on Axions, WIMPs and WISPs, DESY in Hamburg, June 18 to 22, 2018

EuPRAXIA@SPARC_LAB Design study towards a compact FEL facility at LNF

Authors: M. Ferrario, D. Alesini, M. P. Anania, M. Artioli, A. Bacci, S. Bartocci, R. Bedogni, M. Bellaveglia, A. Biagioni, F. Bisesto, F. Brandi, E. Brentegani, F. Broggi, B. Buonomo, P. L. Campana, G. Campogiani, C. Cannaos, S. Cantarella, F. Cardelli, M. Carpanese, M. Castellano, G. Castorina, N. Catalan Lasheras, E. Chiadroni, A. Cianchi , et al. (95 additional authors not shown)

Abstract: On the wake of the results obtained so far at the SPARC\_LAB test-facility at the Laboratori Nazionali di Frascati (Italy), we are currently investigating the possibility to design and build a new multi-disciplinary user-facility, equipped with a soft X-ray Free Electron Laser (FEL) driven by a $\sim$1 GeV high brightness linac based on plasma accelerator modules. This design study is performed in… ▽ More On the wake of the results obtained so far at the SPARC\_LAB test-facility at the Laboratori Nazionali di Frascati (Italy), we are currently investigating the possibility to design and build a new multi-disciplinary user-facility, equipped with a soft X-ray Free Electron Laser (FEL) driven by a $\sim$1 GeV high brightness linac based on plasma accelerator modules. This design study is performed in synergy with the EuPRAXIA design study. In this paper we report about the recent progresses in the on going design study of the new facility. △ Less

Submitted 26 January, 2018; originally announced January 2018.

Selective high frequency mechanical actuation driven by the VO2 electronic instability

Authors: Nicola Manca, Luca Pellegrino, Teruo Kanki, Warner J. Venstra, Giordano Mattoni, Yoshiyuki Higuchi, Hidekazu Tanaka, Andrea D. Caviglia, Daniele Marré

Abstract: Micro- and nano-electromechanical resonators are a fundamental building block of modern technology, used in environmental monitoring, robotics, medical tools as well as fundamental science. These devices rely on dedicated electronics to generate their driving signal, resulting in an increased complexity and size. Here, we present a new paradigm to achieve high-frequency mechanical actuation based… ▽ More Micro- and nano-electromechanical resonators are a fundamental building block of modern technology, used in environmental monitoring, robotics, medical tools as well as fundamental science. These devices rely on dedicated electronics to generate their driving signal, resulting in an increased complexity and size. Here, we present a new paradigm to achieve high-frequency mechanical actuation based on the metal-insulator transition of VO$\mathrm{_2}$, where the steep variation of its electronic properties enables to realize high-frequency electrical oscillations. The dual nature of this phase change, which is both electronic and structural, turns the electrical oscillations into an intrinsic actuation mechanism, powered by a small DC voltage and capable to selectively excite the different mechanical modes of a microstructure. Our results pave the way towards the realization of micro- and nano-electro-mechanical systems with autonomous actuation from integrated DC power sources such as solar cells or micro-batteries. △ Less

Submitted 18 September, 2017; v1 submitted 15 March, 2017; originally announced April 2017.

Comments: Main text: 6 pages, 4 figures Supplemental Material: 16 pages, 7 sections

Journal ref: Adv. Mater. 29, 1701618 (2017)

DAFNE Consolidation Program and Operation with the KLOE-2 Detector

Authors: Catia Milardi, David Alesini, Maria Enrica Biagini, Simone Bini, Manuela Boscolo, Bruno Buonomo, Sergio Cantarella, Antonio De Santis, Giampiero Di Pirro, Giovanni Delle Monache, Alessandro Drago, Luca Foggetta, Oscar Frasciello, Alessandro Gallo, Riccardo Gargana, Andrea Ghigo, Francesco Guatieri, Susanna Guiducci, Franco Iungo, Carlo Ligi, Andrea Michelotti, Luigi Pellegrino, Ruggero Ricci, Ugo Rotundo, Giancarlo Sensolini , et al. (5 additional authors not shown)

Abstract: After a long preparatory phase, including a wide hardware consolidation program, the Italian lepton collider DAFNE, is now systematically delivering data to the KLOE-2 experiment. In approximately 200 days of operation 1 fb-1 has been given to the detector limiting the background to a level compatible with an efficient data acquisition. Instantaneous and maximum daily integrated luminosity measure… ▽ More After a long preparatory phase, including a wide hardware consolidation program, the Italian lepton collider DAFNE, is now systematically delivering data to the KLOE-2 experiment. In approximately 200 days of operation 1 fb-1 has been given to the detector limiting the background to a level compatible with an efficient data acquisition. Instantaneous and maximum daily integrated luminosity measured, so far, are considerably higher with respect to the previous KLOE runs, and are: L(inst) ~ 2.0 1032 cm-2s-1, and L(day) ~ 12.5 pb-1 respectively. A general review concerning refurbishing activities, machine optimization efforts and data taking performances is presented and discussed. △ Less

Submitted 28 September, 2015; originally announced September 2015.

Comments: 19 pages, 13 figures, prepared for the ICFA newsletter67

Technical Design Report EuroGammaS proposal for the ELI-NP Gamma beam System

Authors: O. Adriani, S. Albergo, D. Alesini, M. Anania, D. Angal-Kalinin, P. Antici, A. Bacci, R. Bedogni, M. Bellaveglia, C. Biscari, N. Bliss, R. Boni, M. Boscolo, F. Broggi, P. Cardarelli, K. Cassou, M. Castellano, L. Catani, I. Chaikovska, E. Chiadroni, R. Chiche, A. Cianchi, J. Clarke, A. Clozza, M. Coppola , et al. (84 additional authors not shown)

Abstract: The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the pr… ▽ More The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the produced Gamma Ray beam. The quality, i.e. phase space density, of the two colliding beams will be such that the emitted Gamma ray beam is characterized by energy tunability, spectral density, bandwidth, polarization, divergence and brilliance compatible with the requested performances of the ELI-NP user facility, to be built in Romania as the Nuclear Physics oriented Pillar of the European Extreme Light Infrastructure. This document illustrates the Technical Design finally produced by the EuroGammaS Collaboration, after a thorough investigation of the machine expected performances within the constraints imposed by the ELI-NP tender for the Gamma Beam System (ELI-NP-GBS), in terms of available budget, deadlines for machine completion and performance achievement, compatibility with lay-out and characteristics of the planned civil engineering. △ Less

Submitted 14 July, 2014; originally announced July 2014.

Da$Φ$ne developments for the KLOE-2 experimental run

Authors: C. Milardi, D. Alesini, M. E. Biagini, C. Biscari, R. Boni, M. Boscolo, F. Bossi, B. Buonomo, A. Clozza, G. Delle Monache, T. Demma, E. Di Pasquale, G. Di Pirro, A. Drago, M. Esposito, A. Gallo, A. Ghigo, S. Guiducci, C. Ligi, F. Marcellini, G. Mazzitelli, L. Pellegrino, M. Preger, L. Quintieri, P. Raimondi , et al. (16 additional authors not shown)

Abstract: Recently the peak luminosity achieved on the DAΦNE collider has been improved by almost a factor three by implementing a novel collision scheme based on large Piwinski angle and Crab-Waist. This encouraging result opened new perspectives for physics research and a new run with the KLOE-2 detector has been scheduled to start by spring 2010. The KLOE-2 installation is a complex operation requiring a… ▽ More Recently the peak luminosity achieved on the DAΦNE collider has been improved by almost a factor three by implementing a novel collision scheme based on large Piwinski angle and Crab-Waist. This encouraging result opened new perspectives for physics research and a new run with the KLOE-2 detector has been scheduled to start by spring 2010. The KLOE-2 installation is a complex operation requiring a careful design effort and a several months long shutdown. The high luminosity interaction region has been deeply revised in order to take into account the effect on the beam caused by the solenoidal field of the experimental detector and to ensure background rejection. The shutdown has been also used to implement several other modifications aimed at improving beam dynamics: the wiggler poles have been displaced from the magnet axis in order to cancel high order terms in the field, the feedback systems have been equipped with stronger power supplies and more efficient kickers and electrodes have been inserted inside the wiggler and the dipole vacuum chambers, in the positron ring, to avoid the e-cloud formation. A low level RF feedback has been added to the cavity control in both rings. △ Less

Submitted 8 June, 2010; originally announced June 2010.

Comments: 3 pages, 3 figures, presented to the IPAC10 conference

Design considerations for future DAFNE upgrade

Authors: D. Alesini, G. Benedetti, M. E. Biagini, C. Biscari, R. Boni, M. Boscolo, A. Clozza, G. Delle Monache, G. Di Pirro, A. Drago, A. Gallo, A. Ghigo, S. Guiducci, M. Incurvati, E. Levichev, C. Ligi, F. Marcellini, G. Mazzitelli, C. Milardi, L. Pellegrino, M. A. Preger, P. Raimondi, R. Ricci, U. Rotundo, C. Sanelli , et al. (10 additional authors not shown)

Abstract: The Frascati F-Factory DAFNE has been delivering luminosity to the KLOE, DEAR and FINUDA experiments since year 2000. Since April 2004 the KLOE run has been resumed and recently peak luminosity of 1.0x1032 cm-2s-1 and integrated luminosity of 6.2 pb-1/day have been achieved. The scientific program of the three high-energy experiments sharing DAFNE operation will be completed approximately by the… ▽ More The Frascati F-Factory DAFNE has been delivering luminosity to the KLOE, DEAR and FINUDA experiments since year 2000. Since April 2004 the KLOE run has been resumed and recently peak luminosity of 1.0x1032 cm-2s-1 and integrated luminosity of 6.2 pb-1/day have been achieved. The scientific program of the three high-energy experiments sharing DAFNE operation will be completed approximately by the end of year 2006. A scientific program for DAFNE beyond that date has not been defined yet and it is matter of discussion in the high-energy physics and accelerator physics communities. In this paper we present some future scenarios for DAFNE, discussing the expected ultimate performances of the machine as it is now and addressing the design for an energy and/or luminosity upgrade. The options presented in the following are not exhaustive and they are intended to give a glance of what is doable using the existing infrastructures. △ Less

Submitted 17 November, 2004; originally announced November 2004.

Comments: Presented at the Workshop "DAFNE 2004: Physics at meson factories", 7-14 June 2004, LNF INFN, Frascati, Italy

Journal ref: Frascati Phys.Ser.36:475-484,2005

DAFNE operation with the FINUDA experiment

Authors: C. Milardi, D. Alesini, G. Benedetti, M. E. Biagini, C. Biscari, R. Boni, M. Boscolo, A. Clozza, D. Delle Monache, G. Di Pirro, A. Drago, A. Gallo, A. Ghigo, S. Guiducci, M. Incurvati, C. Ligi, F. Marcellini, G. Mazzitelli, L. Pellegrino, M. A. Preger, P. Raimondi, R. Ricci, U. Rotundo, C. Sanelli, M. Serio , et al. (7 additional authors not shown)

Abstract: DAFNE operation restarted in September 2003, after a six month shut-down for the installation of FINUDA, a magnetic detector dedicated to the study of hypernuclear physics. FINUDA is the third experiment running on DAFNE and operates while keeping on place the other detector KLOE. During the shut-down both Interaction Regions have been equipped with remotely controlled quadrupoles in order to op… ▽ More DAFNE operation restarted in September 2003, after a six month shut-down for the installation of FINUDA, a magnetic detector dedicated to the study of hypernuclear physics. FINUDA is the third experiment running on DAFNE and operates while keeping on place the other detector KLOE. During the shut-down both Interaction Regions have been equipped with remotely controlled quadrupoles in order to operate at different solenoid fields. Among many other hardware upgrades one of the most significant is the reshaping of the wiggler pole profile to improve the field quality and the machine dynamic aperture. Commissioning of the collider in the new configuration has been completed in short time. The peak luminosity delivered to FINUDA has reached 6 10^31 s-1cm-2, with a daily integrated value close to 4 pb-1. △ Less

Submitted 16 August, 2004; originally announced August 2004.

Comments: 3 pages, 4 figures

DAFNE

Authors: S. Guiducci, D. Alesini, G. Benedetti, M. E. Biagini, C. Biscari, R. Boni, M. Boscolo, A. Clozza, G. Delle Monache, G. Di Pirro, A. Drago, A. Gallo, A. Ghigo, F. Marcellini, G. Mazzitelli, C. Milardi, L. Pellegrino, M. A. Preger, P. Raimondi, R. Ricci, C. Sanelli, M. Serio, F. Sgamma, A. Stecchi, C. Vaccarezza , et al. (1 additional authors not shown)

Abstract: The results of 2002 DAFNE operation for the two experiments KLOE and DEAR are described. During 2003 a long shutdown has been dedicated to the installation of new Interaction Regions (IR) and to hardware modifications and upgrades. In the last section optics studies and performances expectations for the new machine configuration are reported. The results of 2002 DAFNE operation for the two experiments KLOE and DEAR are described. During 2003 a long shutdown has been dedicated to the installation of new Interaction Regions (IR) and to hardware modifications and upgrades. In the last section optics studies and performances expectations for the new machine configuration are reported. △ Less

Submitted 25 May, 2004; v1 submitted 1 March, 2004; originally announced March 2004.

Comments: Invited talk at the Workshop on e+e- in the 1-2 GeV range, Alghero, Italy, September 2003 (eConf C0309101)

Journal ref: ECONFC0309101:WEPL003,2003