-
Role of Friction on the Formation of Confined Granular Structures
Authors:
Vinícius Pereira da S. Oliveira,
Danilo S. Borges,
Erick M. Franklin,
Jorge Peixinho
Abstract:
Metastable systems of fluidized grains can auto-defluidize after some time, the settling particles forming either a glass- or crystal-like structure. We carried out experiments using different polymer spheres, of known friction and roughness, fluidized in water. We show that the level of velocity fluctuations is higher for the high friction material. A diagram was obtained for the settled particle…
▽ More
Metastable systems of fluidized grains can auto-defluidize after some time, the settling particles forming either a glass- or crystal-like structure. We carried out experiments using different polymer spheres, of known friction and roughness, fluidized in water. We show that the level of velocity fluctuations is higher for the high friction material. A diagram was obtained for the settled particles when the coefficient of friction is of the order of 0.1, and their structure is characterized through an analysis of the nearest neighbors' angles. For the lower friction values, we find that the number of defects is smaller, the contact chains being longer and aligned. Our results bring new insights for understanding the formation of glass- and crystal-like structures based on the material surface properties.
△ Less
Submitted 20 May, 2025;
originally announced May 2025.
-
Instability and rupture of sheared viscous liquid nanofilms
Authors:
Vira Dhaliwal,
Christian Pedersen,
Kheireddine Kadri,
Guillaume Miquelard-Garnier,
Cyrille Sollogoub,
Jorge Peixinho,
Thomas Salez,
Andreas Carlson
Abstract:
Liquid nanofilms are ubiquitous in nature and technology, and their equilibrium and out-of-equilibrium dynamics are key to a multitude of phenomena and processes. We numerically study the evolution and rupture of viscous nanometric films, incorporating the effects of surface tension, van der waals forces, thermal fluctuations and viscous shear. We show that thermal fluctuations create perturbation…
▽ More
Liquid nanofilms are ubiquitous in nature and technology, and their equilibrium and out-of-equilibrium dynamics are key to a multitude of phenomena and processes. We numerically study the evolution and rupture of viscous nanometric films, incorporating the effects of surface tension, van der waals forces, thermal fluctuations and viscous shear. We show that thermal fluctuations create perturbations that can trigger film rupture, but they do not significantly affect the growth rate of the perturbations. The film rupture time can be predicted from a linear stability analysis of the governing thin film equation, by considering the most unstable wavelength and the thermal roughness. Furthermore, applying a sufficiently large unidirectional shear can stabilise large perturbations, creating a finite-amplitude travelling wave instead of film rupture. In contrast, in three dimensions, unidirectional shear does not inhibit rupture, as perturbations are not suppressed in the direction perpendicular to the applied shear. However, if the direction of shear varies in time, the growth of large perturbations is prevented in all directions, and rupture can hence be impeded.
△ Less
Submitted 27 June, 2023; v1 submitted 26 June, 2023;
originally announced June 2023.
-
Liquid Transfer for Viscoelastic Solutions
Authors:
Hrishikesh Pingulkar,
Jorge Peixinho,
Olivier Crumeyrolle
Abstract:
Viscoelastic liquid transfer from one surface to another is a process that finds applications in many technologies, primarily in printing. Here, cylindrical shaped capillary bridges pinned between two parallel disks are considered. Specifically, the effects of polymer mass fraction, solution viscosity, disk diameter, initial aspect ratio, final aspect ratio, stretching velocity and filling fractio…
▽ More
Viscoelastic liquid transfer from one surface to another is a process that finds applications in many technologies, primarily in printing. Here, cylindrical shaped capillary bridges pinned between two parallel disks are considered. Specifically, the effects of polymer mass fraction, solution viscosity, disk diameter, initial aspect ratio, final aspect ratio, stretching velocity and filling fraction (alike contact angle) are experimentally investigated in uniaxial extensional flow. Both Newtonian and viscoelastic polymer solutions are prepared using polyethylene glycol (PEG) and polyethylene oxide (PEO), with a wide variety of mass fractions. The results show that the increase in polymer mass fraction and solvent viscosity reduces the liquid transfer to the top surface. Moreover, the increase in the initial and final stretching height of the capillary bridge also decreases the liquid transfer, for both Newtonian and viscoelastic solutions. Finally, the shape of the capillary bridge is varied by changing the liquid volume. Now, Newtonian and viscoelastic solutions exhibit opposite behaviors for the liquid transfer. These findings are discussed in terms of interfacial shape instability and gravitational drainage.
△ Less
Submitted 16 August, 2021;
originally announced August 2021.
-
Dewetting of a thin polymer film under shear
Authors:
Kheireddine Kadri,
Jorge Peixinho,
Thomas Salez,
Guillaume Miquelard-Garnier,
Cyrille Sollogoub
Abstract:
The objective of this work is to study the role of shear on the rupture of ultrathin polymer films. To do so, a finite-difference numerical scheme for the resolution of the thin film equation was set up taking into account capillary and van der Waals (vdW) forces. This method was validated by comparing the dynamics obtained from an initial harmonic perturbation to established theoretical predictio…
▽ More
The objective of this work is to study the role of shear on the rupture of ultrathin polymer films. To do so, a finite-difference numerical scheme for the resolution of the thin film equation was set up taking into account capillary and van der Waals (vdW) forces. This method was validated by comparing the dynamics obtained from an initial harmonic perturbation to established theoretical predictions. With the addition of shear, three regimes have then been evidenced as a function of the shear rate. In the case of low shear rates the rupture is delayed when compared to the no-shear problem, while at higher shear rates it is even suppressed: the perturbed interface goes back to its unperturbed state over time. In between these two limiting regimes, a transient one in which shear and vdW forces balance each other, leading to a non-monotonic temporal evolution of the perturbed interface, has been identified. While a linear analysis is sufficient to describe the rupture time in the absence of shear, the nonlinearities appear to be essential otherwise.
△ Less
Submitted 21 July, 2021;
originally announced July 2021.
-
Drop Dynamics of Viscoelastic Filament
Authors:
Hrishikesh Pingulkar,
Jorge Peixinho,
Olivier Crumeyrolle
Abstract:
The stretching of viscoelastic polymer solutions close to break-up can create attached drops on a filament, whose properties and dynamics are little understood. The stretching of capillary bridges and the consecutive filament, until its breakup, can be quantified using diameter-space-time diagrams, which demonstrate hierarchy, as well as, asymmetry of satellite drops around a big central drop. All…
▽ More
The stretching of viscoelastic polymer solutions close to break-up can create attached drops on a filament, whose properties and dynamics are little understood. The stretching of capillary bridges and the consecutive filament, until its breakup, can be quantified using diameter-space-time diagrams, which demonstrate hierarchy, as well as, asymmetry of satellite drops around a big central drop. All drops experience migration, oscillation and merging. In addition, the position of the minimum diameter on the filament is determined, along with the number of drops, their positions, the diameters of drops and the filament breakup time. The maximum number of drops on the filament can be predicted using the Deborah number. The diagrams also quantify the large Hencky strains in the filaments before pinch-off. The obtained minimum diameter is used to measure the extensional viscosity, which indicates the effect of polymer concentration and direction of filament thinning.
△ Less
Submitted 9 January, 2020;
originally announced January 2020.
-
Flow and air-entrainment around partially submerged vertical cylinders
Authors:
Valentin Ageorges,
Jorge Peixinho,
Gaële Perret
Abstract:
In this study, a partially submerged vertical cylinder is moved at constant velocity through water, which is initially at rest. During the motion, the wake behind the cylinder induces free-surface deformation. Eleven cylinders, with diameters from $D=1.4$ to 16 cm, were tested at two different conditions: (i) constant immersed height $h$ and (ii) constant $h/D$. The range of translation velocities…
▽ More
In this study, a partially submerged vertical cylinder is moved at constant velocity through water, which is initially at rest. During the motion, the wake behind the cylinder induces free-surface deformation. Eleven cylinders, with diameters from $D=1.4$ to 16 cm, were tested at two different conditions: (i) constant immersed height $h$ and (ii) constant $h/D$. The range of translation velocities and diameters are in the regime of turbulent wake with experiments carried out for $4500<Re<240 \,000$ and $0.2<Fr<2.4$, where $Re$ and $Fr$ are the Reynolds and Froude numbers based on $D$. The focus here is on drag force measurements and relatively strong free-surface deformation up to air-entrainment. Specifically, two modes of air-entraiment have been uncovered: (i) in the cavity along the cylinder wall and (ii) in the wake of the cylinder. A scaling for the critical velocity for air-entrainment in the cavity has been observed in agreement with a simple model. Furthermore, for $Fr>1.2$, the drag force varies linearly with $Fr$.
△ Less
Submitted 20 May, 2019;
originally announced May 2019.
-
Features of Transition to Turbulence in Sudden Expansion Pipe Flows
Authors:
Minh Quan Nguyen,
Benoit Lebon,
Mostafa Safdari Shadloo,
Abdellah Hadjadj,
Jorge Peixinho
Abstract:
The complex flow features resulting from the laminar-turbulent transition (LTT) in a sudden expansion pipe flow, with expansion ratio of 1:2 subjected to an inlet vortex perturbation is investigated by means of direct numerical simulations (DNS). It is shown that the threshold for LTT described by a power law scaling with -3 exponent that links the perturbation intensity to the subcritical transit…
▽ More
The complex flow features resulting from the laminar-turbulent transition (LTT) in a sudden expansion pipe flow, with expansion ratio of 1:2 subjected to an inlet vortex perturbation is investigated by means of direct numerical simulations (DNS). It is shown that the threshold for LTT described by a power law scaling with -3 exponent that links the perturbation intensity to the subcritical transitional Reynolds number. Additionally, a new type of instability is found within a narrow range of flow parameters. This instability originates from the region of intense shear rate which is a result of the flow symmetry breakdown. Unlike the fast transition, usually reported in the literature, the new instability emerges gradually from a laminar state and appears to be chaotic and strongly unsteady. Additionally, the simulations show a hysteresis mode transition due to the reestablishment of the recirculation zone in a certain range of Reynolds numbers. The latter depends on (i) the initial and final quasi-steady states, (ii) the observation time and (iii) the number of intermediate steps taken when increasing and decreasing the Reynolds number.
△ Less
Submitted 27 July, 2018;
originally announced July 2018.
-
Dynamics of swelling and drying in a spherical gel
Authors:
Thibault Bertrand,
Jorge Peixinho,
Shomeek Mukhopadhyay,
Christopher W. MacMinn
Abstract:
Swelling is a volumetric-growth process in which a porous material expands by spontaneous imbibition of additional pore fluid. Swelling is distinct from other growth processes in that it is inherently poromechanical: Local expansion of the pore structure requires that additional fluid be drawn from elsewhere in the material, or into the material from across the boundaries. Here, we study the swell…
▽ More
Swelling is a volumetric-growth process in which a porous material expands by spontaneous imbibition of additional pore fluid. Swelling is distinct from other growth processes in that it is inherently poromechanical: Local expansion of the pore structure requires that additional fluid be drawn from elsewhere in the material, or into the material from across the boundaries. Here, we study the swelling and subsequent drying of a sphere of hydrogel. We develop a dynamic model based on large-deformation poromechanics and the theory of ideal elastomeric gels, and we compare the predictions of this model with a series of experiments performed with polyacrylamide spheres. We use the model and the experiments to study the complex internal dynamics of swelling and drying, and to highlight the fundamentally transient nature of these strikingly different processes. Although we assume spherical symmetry, the model also provides insight into the transient patterns that form and then vanish during swelling as well as the risk of fracture during drying.
△ Less
Submitted 22 December, 2016; v1 submitted 2 May, 2016;
originally announced May 2016.
-
Flow in a Circular Expansion Pipe Flow: Effect of a Vortex Perturbation on Localized Turbulence
Authors:
Kamal Selvam,
Jorge Peixinho,
Ashley P. Willis
Abstract:
We report the results of three-dimensional direct numerical simulations for incompressible viscous fluid in a circular pipe flow with a sudden expansion. At the inlet, a parabolic velocity profile is applied together with a finite amplitude perturbation in the form of a vortex with its axis parallel to the axis of the pipe. At sufficiently high Reynolds numbers the recirculation region breaks into…
▽ More
We report the results of three-dimensional direct numerical simulations for incompressible viscous fluid in a circular pipe flow with a sudden expansion. At the inlet, a parabolic velocity profile is applied together with a finite amplitude perturbation in the form of a vortex with its axis parallel to the axis of the pipe. At sufficiently high Reynolds numbers the recirculation region breaks into a turbulent patch that changes position axially depending on the strength of the perturbation. This vortex perturbation is believed to produce a less abrupt transition than in previous studies with a tilt perturbation, as the localized turbulence is observed via the formation of a wavy structure at a low order azimuthal mode, which resembles an optimally amplified perturbation. For higher amplitude, the localized turbulence remains at a constant axial position. It is further investigated using proper orthogonal decomposition, which indicates that the centre region close to the expansion is highly energetic.
△ Less
Submitted 23 February, 2016;
originally announced February 2016.
-
Effect of the number of vortices on the torque scaling in Taylor-Couette flow
Authors:
B. Martínez-Arias,
J. Peixinho,
O. Crumeyrolle,
I. Mutabazi
Abstract:
Torque measurements in Taylor-Couette flow, with large radius ratio and large aspect ratio, over a range of velocities up to a Reynolds number of 24 000 are presented. Following a specific procedure, nine states with distinct number of vortices along the axis were found and the aspect ratio of the vortices were measured. The relationship between the speed and the torque for a given number of vorti…
▽ More
Torque measurements in Taylor-Couette flow, with large radius ratio and large aspect ratio, over a range of velocities up to a Reynolds number of 24 000 are presented. Following a specific procedure, nine states with distinct number of vortices along the axis were found and the aspect ratio of the vortices were measured. The relationship between the speed and the torque for a given number of vortices is reported. In the turbulent Taylor vortex flow regime, at relatively high Reynolds number, a change in behaviour is observed corresponding to intersections of the torque-speed curves for different states. Before each intersection, the torque for a state with larger number of vortices is higher. After each intersection, the torque for a state with larger number of vortices is lower. The exponent, from the scaling laws of the torque, always depends on the aspect ratio of the vortices. When the Reynolds number is rescaled using the mean aspect ratio of the vortices, only a partial collapse of the exponent data is found.
△ Less
Submitted 14 April, 2014;
originally announced April 2014.
-
Transition to turbulence in slowly divergent pipe flow
Authors:
Jorge Peixinho,
Hugues Besnard
Abstract:
The results of a combined experimental and numerical study of the flow in slowly diverging pipes are presented. Interestingly, an axisymmetric conical recirculation cell has been observed. The conditions for its existence and the length of the cell are simulated for a range of diverging angles and expansion ratios. There is a critical velocity for the appearance of this state. When the flow rate i…
▽ More
The results of a combined experimental and numerical study of the flow in slowly diverging pipes are presented. Interestingly, an axisymmetric conical recirculation cell has been observed. The conditions for its existence and the length of the cell are simulated for a range of diverging angles and expansion ratios. There is a critical velocity for the appearance of this state. When the flow rate increases further, a subcritical transition for localized turbulence arises. The transition and relaminarization experiments described here quantify the extent of turbulence. The findings suggest that the transition scenario in slowly diverging pipes is a combination of stages similar to those observed in sudden expansions and in straight circular pipe flow.
△ Less
Submitted 30 November, 2013; v1 submitted 30 July, 2013;
originally announced July 2013.
