-
A negative index metamaterial driven by phonons on a ZnO platform
Authors:
Julia Ingles-Cerrillo,
Pablo Ibanez-Romero,
Rajveer Fandan,
Jorge Pedros,
Nolwenn Le Biavan,
Denis Lefebvre,
Maxime Hugues,
Jean-Michel Chauveau,
Miguel Montes Bajo,
Adrian Hierro
Abstract:
Negative index metamaterials (NIMs) can be achieved with uniaxial hyperbolic metamaterials (HMMs) featuring $ε_{parallel}>0$ and $ε_{perpendicular}<0$. This type of approach has been traditionally realized using stacked doped/undoped semiconductor layers. Only recently surface phonon polaritons (SPhPs) have emerged as a promising low-loss alternative to surface plasmon polaritons (SPPs). Despite t…
▽ More
Negative index metamaterials (NIMs) can be achieved with uniaxial hyperbolic metamaterials (HMMs) featuring $ε_{parallel}>0$ and $ε_{perpendicular}<0$. This type of approach has been traditionally realized using stacked doped/undoped semiconductor layers. Only recently surface phonon polaritons (SPhPs) have emerged as a promising low-loss alternative to surface plasmon polaritons (SPPs). Despite this advantage, the SPhP-based approach has been underexplored due to the challenges associated with ensuring high crystal quality in the heterostructure when using alloys with different phonon frequencies. In this work, we design a phononic-driven NIM using a ZnO/(Zn,Mg)O heterostructure, demonstrating control over its hyperbolic behavior through the precise selection of the Mg content and the relative layer thicknesses. Our study shows that increasing the Mg content in the ternary layers enhances the type I behavior, and that the optimal layer thickness varies depending on the Mg content. After analyzing the conditions for achieving type I hyperbolic dispersion, we experimentally demonstrate this concept with a sample featuring equal layer thicknesses and a 32% Mg concentration. We characterize the structure by means of polarized reflectance spectroscopy and use attenuated total reflectance spectroscopy to report the presence of a SPhP mode located within the type I hyperbolic region. By employing the transfer matrix method, we demonstrate that this mode exhibits negative frequency dispersion, a hallmark of type I hyperbolic modes, and isofrequency curve calculations further confirm this behavior. Controlling the design of a phononic hyperbolic type I metamaterial lays the groundwork for exploring its potential applications in attaining low-loss, sub-diffraction-limited optical modes using SPhP excitations.
△ Less
Submitted 10 December, 2024; v1 submitted 1 December, 2024;
originally announced December 2024.
-
Mechanism to transfer linear momentum from a Surface Acoustic Wave to a Magnetic Domain Wall
Authors:
Alejandro Rivelles,
Rocío Yanes,
Luis Torres,
Rodrigo Guedas,
Raúl Izquierdo-López,
Marco Maicas,
Maria del Mar Sanz,
Jorge Pedrós,
Fernando Calle,
Luis López-Díaz,
Jose Luis Prieto
Abstract:
Surface Acoustic Waves (SAW) have been used frequently in spintronic applications, mostly to decrease the magnetic field or the electric current required to move magnetic domain walls (DW). Because the SAW cannot achieve magnetic switching without the assistance of a magnetic field or a current, for a marginal improvement in the energy required for the magnetic switching, the device gains in compl…
▽ More
Surface Acoustic Waves (SAW) have been used frequently in spintronic applications, mostly to decrease the magnetic field or the electric current required to move magnetic domain walls (DW). Because the SAW cannot achieve magnetic switching without the assistance of a magnetic field or a current, for a marginal improvement in the energy required for the magnetic switching, the device gains in complexity, making it impractical. In this work, we report a mechanism that allows a transfer of linear momentum from the acoustic wave to the magnetic domain wall. Experimentally we show that, using the appropriate dimensions of the magnetic strip, the SAW can move the DW in the same direction as the traveling SAW. With the help of micromagnetic simulations, we reveal a complex yet direct mechanism that allows the SAW to push the DW in the same direction of its travel, even without any external field or currents. The DW can reach velocities in the range of 100 m/s and at a very small energetic cost, equivalent to using a current density of $\sim 5 \cdot 10^4 A/cm^2$ if the movement was triggered by spin transfer. This new mechanism opens the door to designing innovative spintronic devices where the magnetization can be controlled exclusively by an acoustic wave.
△ Less
Submitted 18 June, 2024;
originally announced June 2024.
-
Implementation and Optimization of the PTOLEMY Transverse Drift Electromagnetic Filter
Authors:
A. Apponi,
M. G. Betti,
M. Borghesi,
A. Boscá,
F. Calle,
N. Canci,
G. Cavoto,
C. Chang,
W. Chung,
A. G. Cocco,
A. P. Colijn,
N. D'Ambrosio,
N. de Groot,
M. Faverzani,
A. Ferella,
E. Ferri,
L. Ficcadenti,
P. Garcia-Abia,
G. Garcia Gomez-Tejedor,
S. Gariazzo,
F. Gatti,
C. Gentile,
A. Giachero,
Y. Hochberg,
Y. Kahn
, et al. (31 additional authors not shown)
Abstract:
The PTOLEMY transverse drift filter is a new concept to enable precision analysis of the energy spectrum of electrons near the tritium beta-decay endpoint. This paper details the implementation and optimization methods for successful operation of the filter. We present the first demonstrator that produces the required magnetic field properties with an iron return-flux magnet. Two methods for the s…
▽ More
The PTOLEMY transverse drift filter is a new concept to enable precision analysis of the energy spectrum of electrons near the tritium beta-decay endpoint. This paper details the implementation and optimization methods for successful operation of the filter. We present the first demonstrator that produces the required magnetic field properties with an iron return-flux magnet. Two methods for the setting of filter electrode voltages are detailed. The challenges of low-energy electron transport in cases of low field are discussed, such as the growth of the cyclotron radius with decreasing magnetic field, which puts a ceiling on filter performance relative to fixed filter dimensions. Additionally, low pitch angle trajectories are dominated by motion parallel to the magnetic field lines and introduce non-adiabatic conditions and curvature drift. To minimize these effects and maximize electron acceptance into the filter, we present a three-potential-well design to simultaneously drain the parallel and transverse kinetic energies throughout the length of the filter. These optimizations are shown, in simulation, to achieve low-energy electron transport from a 1 T iron core (or 3 T superconducting) starting field with initial kinetic energy of 18.6 keV drained to <10 eV (<1 eV) in about 80 cm. This result for low field operation paves the way for the first demonstrator of the PTOLEMY spectrometer for measurement of electrons near the tritium endpoint to be constructed at the Gran Sasso National Laboratary (LNGS) in Italy.
△ Less
Submitted 24 January, 2022; v1 submitted 23 August, 2021;
originally announced August 2021.
-
Exciton-Plasmon Coupling in 2D Semiconductors by Surface Acoustic Waves
Authors:
Rajveer Fandan,
Jorge Pedrós,
Fernando Calle
Abstract:
We theoretically demonstrate the coupling between excitons in 2D semiconductors and surface plasmons in a thin metal film by means of a surface acoustic wave (SAW), proving that the generated exciton-plasmon polaritons (or plexcitons) are in the strong coupling regime. The strain field of the SAW creates a dynamic diffraction grating providing the momentum match for the surface plasmons, whereas t…
▽ More
We theoretically demonstrate the coupling between excitons in 2D semiconductors and surface plasmons in a thin metal film by means of a surface acoustic wave (SAW), proving that the generated exciton-plasmon polaritons (or plexcitons) are in the strong coupling regime. The strain field of the SAW creates a dynamic diffraction grating providing the momentum match for the surface plasmons, whereas the piezoelectric field, that could dissociate the excitons, is cancelled out by the metal. This is exemplified for monolayer MoS$\mathrm{_{2}}$ and mono- and few-layer black phosphorus on top of a thin silver layer on a LiNbO$\mathrm{_{3}}$ piezoelectric substrate, providing Rabi splittings of 100-150 meV. Thus, we demonstrate that SAWs are powerful tools to modulate the optical properties of supported 2D semiconductors by means of the high-frequency localized deformations tailored by the acoustic transducers, that can serve as electrically switchable launchers of propagating plexcitons suitable for active high-speed nanophotonic applications.
△ Less
Submitted 21 December, 2020;
originally announced December 2020.
-
Dynamic local strain in graphene generated by surface acoustic waves
Authors:
Rajveer Fandan,
Jorge Pedrós,
Alberto Hernández-Mínguez,
Fernando Iikawa,
Paulo V. Santos,
Alberto Boscá,
Fernando Calle
Abstract:
We experimentally demonstrate that the Raman active optical phonon modes of single layer graphene can be modulated by the dynamic local strain created by surface acoustic waves (SAWs). In particular, the dynamic strain field of the SAW is shown to induce a Raman scattering intensity variation as large as 15% and a phonon frequency shift of up to 10 cm$^{-1}$ for the G band, for instance, for an ef…
▽ More
We experimentally demonstrate that the Raman active optical phonon modes of single layer graphene can be modulated by the dynamic local strain created by surface acoustic waves (SAWs). In particular, the dynamic strain field of the SAW is shown to induce a Raman scattering intensity variation as large as 15% and a phonon frequency shift of up to 10 cm$^{-1}$ for the G band, for instance, for an effective hydrostatic strain of 0.24% generated in a single layer graphene atop a LiNbO$_{3}$ piezoelectric substrate with a SAW resonator operating at a frequency of $ \sim $ 400 MHz. Thus, we demonstrate that SAWs are powerful tools to modulate the optical and vibrational properties of supported graphene by means of the high-frequency localized deformations tailored by the acoustic transducers, which can also be extended to other 2D systems.
△ Less
Submitted 27 September, 2019;
originally announced September 2019.
-
Reducing sheet resistance of self-assembled transparent graphene films by defect patching and doping with UV/ozone treatment
Authors:
Tijana Tomašević-Ilić,
Djordje Jovanović,
Igor Popov,
Rajveer Fandan,
Jorge Pedrós,
Marko Spasenović,
Radoš Gajić
Abstract:
Liquid phase exfoliation followed by Langmuir-Blodgett self-assembly (LBSA) is a promising method for scalable production of thin graphene films for transparent conductor applications. However, monolayer assembly into thin films often induces a high density of defects, resulting in a large sheet resistance that hinders practical use. We introduce UV/ozone as a novel photochemical treatment that re…
▽ More
Liquid phase exfoliation followed by Langmuir-Blodgett self-assembly (LBSA) is a promising method for scalable production of thin graphene films for transparent conductor applications. However, monolayer assembly into thin films often induces a high density of defects, resulting in a large sheet resistance that hinders practical use. We introduce UV/ozone as a novel photochemical treatment that reduces sheet resistance of LBSA graphene threefold, while preserving the high optical transparency. The effect of such treatment on our films is opposite to the effect it has on mechanically exfoliated or CVD films, where UV/ozone creates additional defects in the graphene plane, increasing sheet resistance. Raman scattering shows that exposure to UV/ozone reduces the defect density in LBSA graphene, where edges are the dominant defect type. FTIR spectroscopy indicates binding of oxygen to the graphene lattice during exposure to ozone. In addition, work function measurements reveal that the treatment dopes the LBSA film, making it more conductive. Such defect patching paired with doping leads to an accessible way of improving the transparent conductor performance of LBSA graphene, making solution-processed thin films a candidate for industrial use.
△ Less
Submitted 16 August, 2019; v1 submitted 25 July, 2019;
originally announced July 2019.
-
Single-photon Emission from an Acoustically-driven Lateral Light-emitting Diode
Authors:
Tzu-Kan Hsiao,
Antonio Rubino,
Yousun Chung,
Seok-Kyun Son,
Hangtian Hou,
Jorge Pedrós,
Ateeq Nasir,
Gabriel Éthier-Majcher,
Megan J. Stanley,
Richard T. Phillips,
Thomas A. Mitchell,
Jonathan P. Griffiths,
Ian Farrer,
David A. Ritchie,
Christopher J. B. Ford
Abstract:
Single-photon sources are essential building blocks in quantum photonic networks, where quantum-mechanical properties of photons are utilised to achieve quantum technologies such as quantum cryptography and quantum computing. Most conventional solid-state single-photon sources are based on single emitters such as self-assembled quantum dots, which are created at random locations and require spectr…
▽ More
Single-photon sources are essential building blocks in quantum photonic networks, where quantum-mechanical properties of photons are utilised to achieve quantum technologies such as quantum cryptography and quantum computing. Most conventional solid-state single-photon sources are based on single emitters such as self-assembled quantum dots, which are created at random locations and require spectral filtering. These issues hinder the integration of a single-photon source into a scaleable photonic quantum network for applications such as on-chip photonic quantum processors. In this work, using only regular lithography techniques on a conventional GaAs quantum well, we realise an electrically triggered single-photon source with a GHz repetition rate and without the need for spectral filtering. In this device, a single electron is carried in the potential minimum of a surface acoustic wave (SAW) and is transported to a region of holes to form an exciton. The exciton then decays and creates a single photon in a lifetime of ~ 100ps. This SAW-driven electroluminescence (EL) yields photon antibunching with $g^{(2)}(0) = 0.39 \pm 0.05$, which satisfies the common criterion for a single-photon source $g^{(2)}(0) < 0.5$. Furthermore, we estimate that if a photon detector receives a SAW-driven EL signal within one SAW period, this signal has a 79%-90% chance of being a single photon. This work shows that a single-photon source can be made by combining single-electron transport and a lateral n-i-p junction. This approach makes it possible to create multiple synchronised single-photon sources at chosen positions with photon energy determined by quantum-well thickness. Compared with conventional quantum-dot-based single-photon sources, this device may be more suitable for an on-chip integrated photonic quantum network.
△ Less
Submitted 10 January, 2019;
originally announced January 2019.
-
A Design for an Electromagnetic Filter for Precision Energy Measurements at the Tritium Endpoint
Authors:
M. G. Betti,
M. Biasotti,
A. Bosca,
F. Calle,
J. Carabe-Lopez,
G. Cavoto,
C. Chang,
W. Chung,
A. G. Cocco,
A. P. Colijn,
J. Conrad,
N. D'Ambrosio,
P. F. de Salas,
M. Faverzani,
A. Ferella,
E. Ferri,
P. Garcia-Abia,
G. Garcia Gomez-Tejedor,
S. Gariazzo,
F. Gatti,
C. Gentile,
A. Giachero,
J. Gudmundsson,
Y. Hochberg,
Y. Kahn
, et al. (26 additional authors not shown)
Abstract:
We present a detailed description of the electromagnetic filter for the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Starting with an initial estimate for the orbital magnetic moment, the higher-order drift process of ExB is configured to balance the gradient-B drift motion of the electron in such a way as to guide the trajectory into the standing voltage potential alon…
▽ More
We present a detailed description of the electromagnetic filter for the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Starting with an initial estimate for the orbital magnetic moment, the higher-order drift process of ExB is configured to balance the gradient-B drift motion of the electron in such a way as to guide the trajectory into the standing voltage potential along the mid-plane of the filter. As a function of drift distance along the length of the filter, the filter zooms in with exponentially increasing precision on the transverse velocity component of the electron kinetic energy. This yields a linear dimension for the total filter length that is exceptionally compact compared to previous techniques for electromagnetic filtering. The parallel velocity component of the electron kinetic energy oscillates in an electrostatic harmonic trap as the electron drifts along the length of the filter. An analysis of the phase-space volume conservation validates the expected behavior of the filter from the adiabatic invariance of the orbital magnetic moment and energy conservation following Liouville's theorem for Hamiltonian systems.
△ Less
Submitted 15 October, 2018;
originally announced October 2018.
-
PTOLEMY: A Proposal for Thermal Relic Detection of Massive Neutrinos and Directional Detection of MeV Dark Matter
Authors:
E. Baracchini,
M. G. Betti,
M. Biasotti,
A. Bosca,
F. Calle,
J. Carabe-Lopez,
G. Cavoto,
C. Chang,
A. G. Cocco,
A. P. Colijn,
J. Conrad,
N. D'Ambrosio,
P. F. de Salas,
M. Faverzani,
A. Ferella,
E. Ferri,
P. Garcia-Abia,
G. Garcia Gomez-Tejedor,
S. Gariazzo,
F. Gatti,
C. Gentile,
A. Giachero,
J. Gudmundsson,
Y. Hochberg,
Y. Kahn
, et al. (26 additional authors not shown)
Abstract:
We propose to achieve the proof-of-principle of the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Each of the technological challenges described in [1,2] will be targeted and hopefully solved by the use of the latest experimental developments and profiting from the low background environment provided by the LNGS underground site. The first phase will focus on the graphen…
▽ More
We propose to achieve the proof-of-principle of the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Each of the technological challenges described in [1,2] will be targeted and hopefully solved by the use of the latest experimental developments and profiting from the low background environment provided by the LNGS underground site. The first phase will focus on the graphene technology for a tritium target and the demonstration of TES microcalorimetry with an energy resolution of better than 0.05 eV for low energy electrons. These technologies will be evaluated using the PTOLEMY prototype, proposed for underground installation, using precision HV controls to step down the kinematic energy of endpoint electrons to match the calorimeter dynamic range and rate capabilities. The second phase will produce a novel implementation of the EM filter that is scalable to the full target size and which demonstrates intrinsic triggering capability for selecting endpoint electrons. Concurrent with the CNB program, we plan to exploit and develop the unique properties of graphene to implement an intermediate program for direct directional detection of MeV dark matter [3,4]. This program will evaluate the radio-purity and scalability of the graphene fabrication process with the goal of using recently identified ultra-high radio-purity CO2 sources. The direct detection of the CNB is a snapshot of early universe dynamics recorded by the thermal relic neutrino yield taken at a time that predates the epochs of Big Bang Nucleosynthesis, the Cosmic Microwave Background and the recession of galaxies (Hubble Expansion). Big Bang neutrinos are believed to have a central role in the evolution of the Universe and a direct measurement with PTOLEMY will unequivocally establish the extent to which these predictions match present-day neutrino densities.
△ Less
Submitted 6 August, 2018;
originally announced August 2018.
-
Impact of 2D-Graphene on SiN Passivated AlGaN/GaN MIS-HEMTs under Mist Exposure
Authors:
M. Fátima Romero,
Alberto Boscá,
Jorge Pedrós,
Javier Martínez,
Rajveer Fandan,
Tomás Palacios,
Fernando Calle
Abstract:
The effect of a two dimensional (2D) graphene layer (GL) on top of the silicon nitride (SiN) passivation layer of AlGaN/GaN metal-insulator-semiconductor high-electron-mobility transistors (MIS-HEMTs) has been systematically analyzed. Results showed that in the devices without the GL, the maximum drain current density (I_D,max) and the maximum transconductance (g_m,max) decreased gradually as the…
▽ More
The effect of a two dimensional (2D) graphene layer (GL) on top of the silicon nitride (SiN) passivation layer of AlGaN/GaN metal-insulator-semiconductor high-electron-mobility transistors (MIS-HEMTs) has been systematically analyzed. Results showed that in the devices without the GL, the maximum drain current density (I_D,max) and the maximum transconductance (g_m,max) decreased gradually as the mist exposure time increased, up to 23% and 10%, respectively. Moreover, the gate lag ratio (GLR) increased around 10% during mist exposure. In contrast, devices with a GL showed a robust behavior and not significant changes in the electrical characteristics in both DC and pulsed conditions. The origin of these behaviors has been discussed and the results pointed to the GL as the key factor for improving the moisture resistance of the SiN passivation layer.
△ Less
Submitted 31 May, 2018;
originally announced May 2018.
-
Acoustically-driven surface and hyperbolic plasmon-phonon polaritons in graphene/h-BN heterostructures on piezoelectric substrates
Authors:
R. Fandan,
J. Pedrós,
J. Schiefele,
A. Boscá,
J. Martínez,
F. Calle
Abstract:
Surface plasmon polaritons in graphene couple strongly to surface phonons in polar substrates leading to hybridized surface plasmon-phonon polaritons (SPPPs). We demonstrate that a surface acoustic wave (SAW) can be used to launch propagating SPPPs in graphene/h-BN heterostructures on a piezoelectric substrate like AlN, where the SAW-induced surface modulation acts as a dynamic diffraction grating…
▽ More
Surface plasmon polaritons in graphene couple strongly to surface phonons in polar substrates leading to hybridized surface plasmon-phonon polaritons (SPPPs). We demonstrate that a surface acoustic wave (SAW) can be used to launch propagating SPPPs in graphene/h-BN heterostructures on a piezoelectric substrate like AlN, where the SAW-induced surface modulation acts as a dynamic diffraction grating. The efficiency of the light coupling is greatly enhanced by the introduction of the h-BN film as compared to the bare graphene/AlN system. The h-BN interlayer not only significantly changes the dispersion of the SPPPs but also enhances their lifetime. The strengthening of the SPPPs is shown to be related to both the higher carrier mobility induced in graphene and the coupling with h-BN and AlN surface phonons. In addition to surface phonons, hyperbolic phonons appear in the case of multilayer h-BN films leading to hybridized hyperbolic plasmon-phonon polaritons (HPPPs) that are also mediated by the SAW. These results pave the way for engineering SAW-based graphene/h-BN plasmonic devices and metamaterials covering the mid-IR to THz range.
△ Less
Submitted 23 May, 2018;
originally announced May 2018.
-
Coupling light into graphene plasmons through surface acoustic waves
Authors:
Jürgen Schiefele,
Jorge Pedrós,
Fernando Sols,
Fernando Calle,
Francisco Guinea
Abstract:
We propose a scheme for coupling laser light into graphene plasmons with the help of electrically generated surface acoustic waves. The surface acoustic wave forms a diffraction grating which allows to excite the long lived phonon-like branch of the hybridized graphene plasmon-phonon dispersion with infrared laser light. Our approach avoids patterning the graphene sheet, does not rely on complicat…
▽ More
We propose a scheme for coupling laser light into graphene plasmons with the help of electrically generated surface acoustic waves. The surface acoustic wave forms a diffraction grating which allows to excite the long lived phonon-like branch of the hybridized graphene plasmon-phonon dispersion with infrared laser light. Our approach avoids patterning the graphene sheet, does not rely on complicated optical near-field techniques, and allows to electrically switch the coupling between far field radiation and propagating graphene plasmons.
△ Less
Submitted 3 September, 2013;
originally announced September 2013.
