-
Torsion in a rotating coupled cylinder with different coupling conditions: stress, displacement and approximating a damaged cylinder
Authors:
Igor Istenes,
Daniel Peck,
Yuriy Protserov,
Natalya Vaysfeld,
Zinaida Zhuravlova
Abstract:
The torsion loading of a coupled cylinder, whose distinct upper and lower cylindrical sections may be composed of different materials, is considered. The bottom of the cylinder is fixed in place, and induces the cylinder rotation. The torsion is applied via an arbitrary loading on the upper face. Three forms of coupling condition between the upper and lower cylinders are outlined: ideal, soft (wea…
▽ More
The torsion loading of a coupled cylinder, whose distinct upper and lower cylindrical sections may be composed of different materials, is considered. The bottom of the cylinder is fixed in place, and induces the cylinder rotation. The torsion is applied via an arbitrary loading on the upper face. Three forms of coupling condition between the upper and lower cylinders are outlined: ideal, soft (weak), and rigid (hard/ stiff) contact. The resulting displacements and tangential stresses are obtained using the finite Hankel transform, and a Green's function representation of the displacement. Numerical results are provided, and the impact of the differing coupling conditions investigated for a range of cylinder geometries and material properties. A method for using the coupled cylinder model to approximate the displacement of a cylinder containing a damaged region via a weak interfacial layer is outlined. The properties of the weak interface layer needed for this approximation are determined, and the advantages of its use in non-destructive testing are discussed.
△ Less
Submitted 13 June, 2025;
originally announced June 2025.
-
Peculiarities of hydraulic fracture propagation in media with heterogeneous toughness: the energy balance, elastic battery and fluid backflow
Authors:
Daniel Peck,
Gaspare Da Fies,
Ivan Virshylo,
Gennady Mishuris
Abstract:
This paper investigates hydraulic fracture in a media with periodic heterogeneous toughness. Results for the plane-strain (KGD) model are analysed. The energy distribution as the fracture propagates is examined, along with the evolution of the crack geometry. It is shown that the solid layer acts as an elastic battery, discharging to promote rapid propagation through weaker material layers. The li…
▽ More
This paper investigates hydraulic fracture in a media with periodic heterogeneous toughness. Results for the plane-strain (KGD) model are analysed. The energy distribution as the fracture propagates is examined, along with the evolution of the crack geometry. It is shown that the solid layer acts as an elastic battery, discharging to promote rapid propagation through weaker material layers. The limiting case of an infinite-length crack is discussed. The velocity of the fluid throughout the crack length is also considered. For fractures in high-toughness material it is shown that fluid backflow can occur, with its profile dependent on the toughness distribution. The implications of these findings are discussed.
△ Less
Submitted 25 February, 2025; v1 submitted 26 October, 2024;
originally announced October 2024.
-
Hidden ring crack in a rotating cylindrical shell under torsion
Authors:
Zinaida Zhuravlova,
Igor Istenes,
Daniel Peck,
Yuriy Protserov,
Nataly Vaysfeld
Abstract:
We consider the impact of a ring crack within a rotating hollow cylinder of fixed height under axisymmetric (torsion) loading. The form of the displacement is obtained from the equation of motion using the Fourier sin transform. The displacement jump over the crack is obtained from the boundary condition on the tangential stress, formulated as a singular integral equation which is solved by the me…
▽ More
We consider the impact of a ring crack within a rotating hollow cylinder of fixed height under axisymmetric (torsion) loading. The form of the displacement is obtained from the equation of motion using the Fourier sin transform. The displacement jump over the crack is obtained from the boundary condition on the tangential stress, formulated as a singular integral equation which is solved by the method of orthogonal polynomials. The stress intensity factors on the opposing crack surfaces are calculated. The dependence of the crack extension on the problem geometry is investigated, including the impact of the crack's location, cylinder's height, torsion loading and rotation frequency. Possible extensions of the model to cover fatigue cracking are considered. A practical test to detect and locate cracks within a rotating cylinder is outlined.
△ Less
Submitted 16 September, 2023;
originally announced September 2023.
-
Averaging-based approach to toughness homogenisation for radial hydraulic fracture
Authors:
Gaspare Da Fies,
Martin Dutko,
Daniel Peck
Abstract:
The homogenisation of the fracture toughness is considered in the context of a propagating hydraulic fracture. The radial (penny-shape) model is utilized, in order to incorporate the impact of the viscosity-toughness regime transition over time. A homogenisation strategy based upon temporal-averaging is investigated. This approach incorporates the instantaneous fracture velocity, meaning that it s…
▽ More
The homogenisation of the fracture toughness is considered in the context of a propagating hydraulic fracture. The radial (penny-shape) model is utilized, in order to incorporate the impact of the viscosity-toughness regime transition over time. A homogenisation strategy based upon temporal-averaging is investigated. This approach incorporates the instantaneous fracture velocity, meaning that it should remain effective in the case of step-wise crack advancement. The effectiveness of the approach is demonstrated for periodic toughness distributions, including those which are unbalanced, utilizing a highly accurate solver.
△ Less
Submitted 6 November, 2022;
originally announced November 2022.
-
Impact of the tangential traction for radial hydraulic fracture
Authors:
Daniel Peck,
Gaspare Da Fies
Abstract:
The radial (penny-shaped) model of hydraulic fracture is considered. The tangential traction on the fracture walls is incorporated, including an updated evaluation of the energy release rate (fracture criterion), system asymptotics and the need to account for stagnant zone formation near the injection point. The impact of incorporating the shear stress on the construction of solvers, and the effec…
▽ More
The radial (penny-shaped) model of hydraulic fracture is considered. The tangential traction on the fracture walls is incorporated, including an updated evaluation of the energy release rate (fracture criterion), system asymptotics and the need to account for stagnant zone formation near the injection point. The impact of incorporating the shear stress on the construction of solvers, and the effectiveness of approximating system parameters using the first term of the crack tip asymptotics, is discussed. A full quantitative investigation of the impact of tangential traction on solution is undertaken, utilizing an extremely effective (in-house build) adaptive time-space solver.
△ Less
Submitted 30 September, 2022;
originally announced October 2022.
-
A temporal-averaging based approach to toughness homogenisation in heterogeneous material
Authors:
Gaspare Da Fies,
Daniel Peck,
Martin Dutko,
Gennady Mishuris
Abstract:
A new approach to defining the effective fracture toughness for heterogeneous materials is proposed. This temporal averaging approach is process-dependent, incorporating the crack velocity and material toughness. The effectiveness of the new technique is investigated in the context of hydraulic fracture through heterogeneous rock with a periodic material toughness. The plane strain model is consid…
▽ More
A new approach to defining the effective fracture toughness for heterogeneous materials is proposed. This temporal averaging approach is process-dependent, incorporating the crack velocity and material toughness. The effectiveness of the new technique is investigated in the context of hydraulic fracture through heterogeneous rock with a periodic material toughness. The plane strain model is considered without fluid leak-off, to more easily investigate different regimes (toughness/viscosity). Numerical simulations are used to examine the effectiveness of the new homogenisation strategy, with comparison against the recently-proposed maximum toughness strategy. Simulations are conducted using an extremely effective (in house-built) time-space adaptive solver. The regimes in which each strategy is effective are determined.
△ Less
Submitted 13 July, 2022; v1 submitted 22 March, 2022;
originally announced March 2022.
-
Numerical simulation of hydraulic fracturing: a hybrid FEM based algorithm
Authors:
Michal Wrobel,
Panos Papanastasiou,
Daniel Peck
Abstract:
In this paper a problem of numerical simulation of hydraulic fractures is considered. An efficient algorithm of solution is proposed for the plain strain model of hydraulic fracturing. The algorithm utilizes a FEM based subroutine to compute deformation of the fractured material. The flow of generalized Newtonian fluid in the fracture is modelled in the framework of lubrication theory. In this way…
▽ More
In this paper a problem of numerical simulation of hydraulic fractures is considered. An efficient algorithm of solution is proposed for the plain strain model of hydraulic fracturing. The algorithm utilizes a FEM based subroutine to compute deformation of the fractured material. The flow of generalized Newtonian fluid in the fracture is modelled in the framework of lubrication theory. In this way, the architecture of the computational scheme is relatively simple and enables one to deal with advanced cases of the fractured material properties and configurations as well as various rheological models of fluid. In particular, the problems of poroelasticity, plasticity and spatially varying properties of the fractured material can be analyzed. The accuracy and efficiency of the proposed algorithm are verified against analytical benchmark solutions. The algorithm capabilities are demonstrated using the example of the hydraulic fracture propagating in complex geological settings.
△ Less
Submitted 25 April, 2022; v1 submitted 10 August, 2021;
originally announced August 2021.
-
Energy Release Rate, the crack closure integral and admissible singular fields in Fracture Mechanics
Authors:
Andrea Piccolroaz,
Daniel Peck,
Michal Wrobel,
Gennady Mishuris
Abstract:
One of the assumptions of Linear Elastic Fracture Mechanics is that the crack faces are traction-free or, at most, loaded by bounded tractions. The standard Irwin's crack closure integral, widely used for the computation of the Energy Release Rate, also relies upon this assumption. However, there are practical situations where the load acting on the crack boundaries is singular. This is the case,…
▽ More
One of the assumptions of Linear Elastic Fracture Mechanics is that the crack faces are traction-free or, at most, loaded by bounded tractions. The standard Irwin's crack closure integral, widely used for the computation of the Energy Release Rate, also relies upon this assumption. However, there are practical situations where the load acting on the crack boundaries is singular. This is the case, for instance, in hydraulic fracturing, where the fluid inside the crack exerts singular tangential tractions at its front. Another example of unbounded tractions is the case of a rigid line inclusion (anticrack) embedded into an elastic body. In such situations, the classical Irwin's crack closure integral fails to provide the correct value of the Energy Release Rate. In this paper, we address the effects occurring when square-root singular tractions act at the boundary of a line defect in an elastic solid and provide a generalisation of Irwin's crack closure integral. The latter yields the correct Energy Release Rate and allows broad applications, including, among others, hydraulic fracturing, soft materials containing stiff inclusions, rigid inclusions, shear bands and cracks characterized by the Gurtin-Murdoch surface stress elasticity. We present the results in the most general form, where six Stress Intensity Factors are present: three of them are classical SIFs corresponding to the modes I-II-III and computed under the assumption of homogeneous boundary conditions at the defect surfaces, while the other three SIFs are associated with singular admissible tractions (those that lead to a finite ERR value). It is demonstrated that this approach resolves an ambiguity in using the same SIF's terminology in the cases of open cracks and rigid inclusions, among other benefits.
△ Less
Submitted 9 April, 2021; v1 submitted 31 March, 2021;
originally announced March 2021.
-
Particle velocity based hydrofracturing algorithm for a penny-shaped crack
Authors:
Daniel Peck,
Michel Wrobel,
Monika Perkowska,
Gennady Mishuris
Abstract:
A universal particle velocity based algorithm for simulating hydraulic fracture with leak-off, previously demonstrated for the PKN and KGD models, is extended to obtain solutions for a penny-shaped crack. The numerical scheme is capable of dealing with both the viscosity and toughness dominated regimes, with the fracture being driven by a power-law fluid. The computational approach utilizes two de…
▽ More
A universal particle velocity based algorithm for simulating hydraulic fracture with leak-off, previously demonstrated for the PKN and KGD models, is extended to obtain solutions for a penny-shaped crack. The numerical scheme is capable of dealing with both the viscosity and toughness dominated regimes, with the fracture being driven by a power-law fluid. The computational approach utilizes two dependent variables; the fracture aperture and the reduced particle velocity. The latter allows for the application of a local condition of the Stefan type (the speed equation) to trace the fracture front. The obtained numerical solutions are carefully tested using various methods, and are shown to achieve a high level of accuracy. Simple, accurate, semi-analytical approximations of the solution are provided for the zero leak-off case. A comparison with other results available in the literature is undertaken.
△ Less
Submitted 14 November, 2018; v1 submitted 10 December, 2016;
originally announced December 2016.
