-
Oxygen Vacancy-Induced Monoclinic Dead Layers in Ferroelectric $Hf_xZr_{1-x}O_2$ With Metal Electrodes
Authors:
Tanmoy Kumar Paul,
Atanu Kumar Saha,
Sumeet Kumar Gupta
Abstract:
In this work, we analyze dead layer comprising non-polar monoclinic (m) phase in $Hf_xZr_{1-x}O_2$ (HZO)-based ferroelectric (FE) material using first principles analysis. We show that with widely used tungsten (W) metal electrode, the spatial distribution of the oxygen vacancy across the cross-section plays a key role in dictating the favorability of m- phase formation at the metal-HfO2 interface…
▽ More
In this work, we analyze dead layer comprising non-polar monoclinic (m) phase in $Hf_xZr_{1-x}O_2$ (HZO)-based ferroelectric (FE) material using first principles analysis. We show that with widely used tungsten (W) metal electrode, the spatial distribution of the oxygen vacancy across the cross-section plays a key role in dictating the favorability of m- phase formation at the metal-HfO2 interface. The energetics are also impacted by the polarization direction as well as the depth of oxygen vacancy, i.e., position along the thickness. At the metal - $HfO_2$ interface, when polarization points towards the metal and vacancy forms at trigonally bonded O atomic site, both interfacial relaxation and m- phase formation can lead to dead layers. For vacancies at other oxygen atomic sites and polarization direction, dead layer is formed due to sole interfacial relaxation with polar phase. We also establish the relative favorability of the m-phase dead layer for different Zr concentrations (x=1 and x = 0.5) and metal electrodes. According to our analysis, 50% Zr doped $HfO_2$ exhibits less probability of m-phase dead layer formation compared to pure $HfO_2$. Moreover, with electrodes consisting of noble metal (Pt, Pd, Os, Ru, Rh), m-phase dead layer formation is less likely. Therefore, for these metals, dead layer forms mainly due to the interfacial relaxation with polar phase.
△ Less
Submitted 9 December, 2024;
originally announced December 2024.
-
From microscopic to macroscopic: the large number dynamics of agents and cells, possibly interacting with a chemical background
Authors:
Thierry Paul
Abstract:
In this paper we review some recent results dealing with the transition between microscopic and macroscopic scales in different fields, including kinetic theory, cells movement in biology, chemotaxis, flocking phenomena and agent systems. The methodology of the mean-field approach of this study uses the concept of marginals instead of the empirical measure paradigm. Numerical computations showing…
▽ More
In this paper we review some recent results dealing with the transition between microscopic and macroscopic scales in different fields, including kinetic theory, cells movement in biology, chemotaxis, flocking phenomena and agent systems. The methodology of the mean-field approach of this study uses the concept of marginals instead of the empirical measure paradigm. Numerical computations showing some theoretically unexpected features are presented at the end of the paper.
△ Less
Submitted 10 June, 2024;
originally announced June 2024.
-
Head-to-Head and Tail-to-Tail Domain Wall in Hafnium Zirconium Oxide: A First Principles Analysis of Domain Wall Formation and Energetics
Authors:
Tanmoy K. Paul,
Atanu K. Saha,
Sumeet K. Gupta
Abstract:
180° domains walls (DWs) of Head-to-Head/Tail-to-Tail (H-H/T-T) type in ferroelectric (FE) materials are of immense interest for a comprehensive understanding of the FE attributes as well as harnessing them for new applications. Our first principles calculation suggests that such DW formation in Hafnium Zirconium Oxide (HZO) based FEs depends on the unique attributes of the HZO unit cell, such as…
▽ More
180° domains walls (DWs) of Head-to-Head/Tail-to-Tail (H-H/T-T) type in ferroelectric (FE) materials are of immense interest for a comprehensive understanding of the FE attributes as well as harnessing them for new applications. Our first principles calculation suggests that such DW formation in Hafnium Zirconium Oxide (HZO) based FEs depends on the unique attributes of the HZO unit cell, such as polar-spacer segmentation. Cross pattern of the polar and spacer segments in two neighboring domains along the polarization direction (where polar segment of one domain aligns with the spacer segment of another) boosts the stability of such DWs. We further show that low density of oxygen vacancies at the metal-HZO interface and high work function of metal electrodes are conducive for T-T DW formation. On the other hand, high density of oxygen vacancy and low work function of metal electrode favor H-H DW formation. Polarization bound charges at the DW get screened when band bending from depolarization field accumulates holes (electrons) in T-T (H-H) DW. For a comprehensive understanding, we also investigate their FE nature and domain growth mechanism. Our analysis suggests that a minimum thickness criterion of domains has to be satisfied for the stability of H-H/T-T DW and switching of the domains through such DW formation.
△ Less
Submitted 30 November, 2023; v1 submitted 21 May, 2023;
originally announced May 2023.
-
Mean Field Limit for the Kac model and Grand Canonical Formalism
Authors:
Thierry Paul,
Mario Pulvirenti,
Sergio Simonella
Abstract:
We consider the classical Kac's model for the approximation of the Boltzmann equation, and study the correlation error measuring the defect of propagation of chaos in the mean field limit. This contribution is inspired by a recent paper of the same authors where a large class of models, including quantum systems, are considered. Here we outline the main ideas in the context of grand canonical me…
▽ More
We consider the classical Kac's model for the approximation of the Boltzmann equation, and study the correlation error measuring the defect of propagation of chaos in the mean field limit. This contribution is inspired by a recent paper of the same authors where a large class of models, including quantum systems, are considered. Here we outline the main ideas in the context of grand canonical measures, for which both the evolution equations and the proof simplify.
△ Less
Submitted 22 December, 2023; v1 submitted 20 December, 2022;
originally announced December 2022.
-
Direction-Dependent Lateral Domain Walls in Ferroelectric Hafnium Zirconium Oxide and their Gradient Energy Coefficients: A First Principles Study
Authors:
Tanmoy K. Paul,
Atanu K. Saha,
Sumeet K. Gupta
Abstract:
To understand and harness the physical mechanisms of ferroelectric Hafnium Zirconium Oxide (HZO)-based devices, there is a need for clear understanding of domain interactions, their dynamics, negative capacitance effects, and other multi-domain characteristics. These crucial attributes depend on the coupling between neighboring domains quantified by the gradient energy coefficient (g). Furthermore…
▽ More
To understand and harness the physical mechanisms of ferroelectric Hafnium Zirconium Oxide (HZO)-based devices, there is a need for clear understanding of domain interactions, their dynamics, negative capacitance effects, and other multi-domain characteristics. These crucial attributes depend on the coupling between neighboring domains quantified by the gradient energy coefficient (g). Furthermore, HZO has unique orientation-dependent lateral multidomain configurations. To develop an in-depth understanding of multi-domain effects, there is a need for thorough analysis of g. In this work, the energetics of multidomain configurations and domain growth mechanism corresponding to lateral domain walls of HZO are analyzed and gradient energy coefficients are quantified using first-principles Density Functional Theory calculations. These results indicate that one lateral direction exhibits the following characteristics: i) DW is ultra-sharp and domain growth occurs unit-cell-by-unit-cell, ii) the value of g is negative and in the order of $10^{-12} Vm^{3}C^{-1}$, and iii) g reduces (increases) with compressive (tensile) strain. In contrast, in the other lateral direction, the following attributes are observed: i) DW is gradual and domain growth occurs in quanta of half-unit-cell, ii) g is positive and in the order of $10^{-10} Vm^{3}C^{-1}$, and iii) g increases (reduces) with compressive (tensile) strain.
△ Less
Submitted 4 December, 2023; v1 submitted 23 August, 2022;
originally announced August 2022.
-
Raman spectroscopy in open world learning settings using the Objectosphere approach
Authors:
Yaroslav Balytskyi,
Justin Bendesky,
Tristan Paul,
Guy Hagen,
Kelly McNear
Abstract:
Raman spectroscopy in combination with machine learning has significant promise for applications in clinical settings as a rapid, sensitive, and label-free identification method. These approaches perform well in classifying data that contains classes that occur during the training phase. However, in practice, there are always substances whose spectra have not yet been taken or are not yet known an…
▽ More
Raman spectroscopy in combination with machine learning has significant promise for applications in clinical settings as a rapid, sensitive, and label-free identification method. These approaches perform well in classifying data that contains classes that occur during the training phase. However, in practice, there are always substances whose spectra have not yet been taken or are not yet known and when the input data are far from the training set and include new classes that were not seen at the training stage, a significant number of false positives are recorded which limits the clinical relevance of these algorithms. Here we show that these obstacles can be overcome by implementing recently introduced Entropic Open Set and Objectosphere loss functions. To demonstrate the efficiency of this approach, we compiled a database of Raman spectra of 40 chemical classes separating them into 20 biologically relevant classes comprised of amino acids, 10 irrelevant classes comprised of bio-related chemicals, and 10 classes that the Neural Network has not seen before, comprised of a variety of other chemicals. We show that this approach enables the network to effectively identify the unknown classes while preserving high accuracy on the known ones, dramatically reducing the number of false positives while preserving high accuracy on the known classes, which will allow this technique to bridge the gap between laboratory experiments and clinical applications.
△ Less
Submitted 11 November, 2021;
originally announced November 2021.
-
Preparation and characterization of Fe-incorporated TiO$_2$ thin films: A study of optical constants and dispersion energy parameters
Authors:
Tapash Chandra Paul,
Jiban Podder,
Lincoln Paik
Abstract:
In this study, we have delineated the preparation and influence of Fe doping on microstructural and optical properties of the pristine and Fe incorporated TiO$_2$ thin film with different Fe concentrations (0, 2, 4, 6, and 8 at.% ). The samples are prepared by easier and cost-saving way of spray pyrolysis technique (SPT) using Ti(OCH$_2$CH$_2$CH$_2$CH$_3$)$_4$ as a precursor of mother material. Th…
▽ More
In this study, we have delineated the preparation and influence of Fe doping on microstructural and optical properties of the pristine and Fe incorporated TiO$_2$ thin film with different Fe concentrations (0, 2, 4, 6, and 8 at.% ). The samples are prepared by easier and cost-saving way of spray pyrolysis technique (SPT) using Ti(OCH$_2$CH$_2$CH$_2$CH$_3$)$_4$ as a precursor of mother material. The effect of Fe in the microstructure and phase formation of TiO$_2$ thin films is investigated by XRD analysis. XRD investigation depicts that the pristine product corresponds to anatase phase of TiO$_2$ and remains uncontaminated with addition of 2 at.% Fe impurity. It is also observed that Fe introduces a phase transition from anatase to rutile after adulterating more Fe contents (4, 6 and 8 at.%). In order to study optical characteristics, UVvis spectroscopy has been employed which revels that UV absorption for the Fe incorporated TiO$_2$ products are noticed to move to a longer wavelength (red shift) and Fe contents lessen bandgap energy from 3.81eV (0 at.% Fe) to 3.70 eV (8 at.% Fe) of the TiO$_2$ thin films. The impact of Fe on the optical constants such as refractive index, complex dielectric constants, $\tanδ$, VELF and SELF, dispersion parameters of obtained titanium dioxide samples has been studied. The results display that Fe influences the structural and optical characteristics significantly.
△ Less
Submitted 5 March, 2021;
originally announced March 2021.
-
Gate-controllable electronic trap detection in dielectrics
Authors:
Sandip Mondal1,
Tathagata Paul,
Arindam Ghosh,
V. Venkataraman
Abstract:
Gate controllable electronic trap detection method has been demonstrated by regulating the gate potential of MIS devices. This method is based on shift of capacitance voltage (CV) curve as well as flatband voltage (VFB) measure in less than 10 micro-seconds due to injection or ejection of electrons through the metal gate. Using this method, an electronic trap energy distribution was measured in th…
▽ More
Gate controllable electronic trap detection method has been demonstrated by regulating the gate potential of MIS devices. This method is based on shift of capacitance voltage (CV) curve as well as flatband voltage (VFB) measure in less than 10 micro-seconds due to injection or ejection of electrons through the metal gate. Using this method, an electronic trap energy distribution was measured in the HfO2 dielectric film and it confirms a maximum number of traps (Delta_NT) of 1.7x1012 cm-2 corresponding to an energy level (Delta_EIL) of 0.45 eV above silicon conduction band (Si-ECB). In comparison, ZrO2-based MIS devices showed a broader distribution of electronic traps throughout the band gap. However, HfO2 contained more than 60% traps in deep level compared to 50% in ZrO2, which establishes the effects of material variation.
△ Less
Submitted 30 March, 2020;
originally announced March 2020.
-
Raft-like domain formation in model lipid-cholesterol aggregation
Authors:
Tanay Paul,
Jayashree Saha
Abstract:
To understand mechanism of cell-membrane compartmentalization, we studied coarse-grained model systems consisting of lipid and cholesterol molecules. Cholesterol plays crucial role in lateral phase segregation in the bilayered lipid membrane to form cholesterol rich liquid ordered domains, termed as `rafts'. In this NVT Molecular Dynamics simulation study, we have investigated the role of choleste…
▽ More
To understand mechanism of cell-membrane compartmentalization, we studied coarse-grained model systems consisting of lipid and cholesterol molecules. Cholesterol plays crucial role in lateral phase segregation in the bilayered lipid membrane to form cholesterol rich liquid ordered domains, termed as `rafts'. In this NVT Molecular Dynamics simulation study, we have investigated the role of cholesterol in raft-like domain formation. The study reveals that the strength of cholesterol interaction is an important factor behind the phase segregation to form cholesterol rich domains, whereas, the relative dipolar strength of lipid and cholesterol molecules controls the formation of multi-bilayered stack.
△ Less
Submitted 30 January, 2020;
originally announced January 2020.
-
A Cantilever Torque Magnetometry Method for the Measurement of Hall Conductivity of Highly Resistive Samples
Authors:
Samuel Mumford,
Tiffany Paul,
Seung Hwan Lee,
Amir Yacoby,
Aharon Kapitulnik
Abstract:
We present the first measurements of Hall conductivity utilizing a new torque magnetometry method designed for insulators. A Corbino disk exhibits a magnetic dipole moment proportional to Hall conductivity when voltage is applied across a test material. This magnetic dipole moment can be measured through torque magnetometry. The symmetry of this contactless technique allows for the measurement of…
▽ More
We present the first measurements of Hall conductivity utilizing a new torque magnetometry method designed for insulators. A Corbino disk exhibits a magnetic dipole moment proportional to Hall conductivity when voltage is applied across a test material. This magnetic dipole moment can be measured through torque magnetometry. The symmetry of this contactless technique allows for the measurement of Hall conductivity in previously inaccessible materials. Finally, a low-temperature noise bound, the lack of systematic errors on dummy devices, and a measurement of the Hall conductivity of sputtered indium tin oxide demonstrate the efficacy of the technique.
△ Less
Submitted 30 August, 2019; v1 submitted 28 August, 2019;
originally announced August 2019.
-
A high-performance MoS2 synaptic device with floating gate engineering for Neuromorphic Computing
Authors:
Tathagata Paul,
Tanweer Ahmed,
Krishna Kanhaiya Tiwari,
Chetan Singh Thakur,
Arindam Ghosh
Abstract:
As one of the most important members of the two dimensional chalcogenide family, molybdenum disulphide (MoS2) has played a fundamental role in the advancement of low dimensional electronic, optoelectronic and piezoelectric designs. Here, we demonstrate a new approach to solid state synaptic transistors using two dimensional MoS2 floating gate memories. By using an extended floating gate architectu…
▽ More
As one of the most important members of the two dimensional chalcogenide family, molybdenum disulphide (MoS2) has played a fundamental role in the advancement of low dimensional electronic, optoelectronic and piezoelectric designs. Here, we demonstrate a new approach to solid state synaptic transistors using two dimensional MoS2 floating gate memories. By using an extended floating gate architecture which allows the device to be operated at near-ideal subthreshold swing of 77 mV/decade over four decades of drain current, we have realised a charge tunneling based synaptic memory with performance comparable to the state of the art in neuromorphic designs. The device successfully demonstrates various features of a biological synapse, including pulsed potentiation and relaxation of channel conductance, as well as spike time dependent plasticity (STDP). Our device returns excellent energy efficiency figures and provides a robust platform based on ultrathin two dimensional nanosheets for future neuromorphic applications.
△ Less
Submitted 6 April, 2019;
originally announced April 2019.
-
Spectral Calibration of the Fluorescence Telescopes of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz
, et al. (381 additional authors not shown)
Abstract:
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator.…
▽ More
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator. Different sets of telescopes in the observatory have different optical components, and the eight telescopes measured represent two each of the four combinations of components represented in the observatory. We made an end-to-end measurement of the response from different combinations of optical components, and the monochromator setup allowed for more precise and complete measurements than our previous multi-wavelength calibrations. We find an overall uncertainty in the calibration of the spectral response of most of the telescopes of 1.5% for all wavelengths; the six oldest telescopes have larger overall uncertainties of about 2.2%. We also report changes in physics measureables due to the change in calibration, which are generally small.
△ Less
Submitted 2 October, 2017; v1 submitted 5 September, 2017;
originally announced September 2017.
-
Muon Counting using Silicon Photomultipliers in the AMIGA detector of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu
, et al. (400 additional authors not shown)
Abstract:
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is com…
▽ More
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is composed of three scintillation modules, with a 10 m$^2$ detection area per module. In this paper, a new generation of detectors, replacing the current multi-pixel photomultiplier tube (PMT) with silicon photo sensors (aka. SiPMs), is proposed. The selection of the new device and its front-end electronics is explained. A method to calibrate the counting system that ensures the performance of the detector is detailed. This method has the advantage of being able to be carried out in a remote place such as the one where the detectors are deployed. High efficiency results, i.e. 98 % efficiency for the highest tested overvoltage, combined with a low probability of accidental counting ($\sim$2 %), show a promising performance for this new system.
△ Less
Submitted 4 October, 2017; v1 submitted 17 March, 2017;
originally announced March 2017.
-
Effect of dipolar-angle on phospholipid assembly
Authors:
Tanay Paul,
Jayashree Saha
Abstract:
We report the effect of lipid head-group dipole orientation on phase behaviour of phospholipid assembly. The work explains molecular-scale mechanism of ion-lipid, anesthetic-lipid interactions where reorientation of dipoles play important role in membrane potential modification. Molecular Dynamics simulations are performed to analyse structure-property relationship and dynamical behaviour of lipid…
▽ More
We report the effect of lipid head-group dipole orientation on phase behaviour of phospholipid assembly. The work explains molecular-scale mechanism of ion-lipid, anesthetic-lipid interactions where reorientation of dipoles play important role in membrane potential modification. Molecular Dynamics simulations are performed to analyse structure-property relationship and dynamical behaviour of lipid biomembranes considering coarse-grained model interactions.
△ Less
Submitted 9 August, 2016;
originally announced August 2016.
-
Prototype muon detectors for the AMIGA component of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin
, et al. (429 additional authors not shown)
Abstract:
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary…
▽ More
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary Cell, are to identify and resolve all engineering issues as well as to understand the muon-number counting uncertainties related to the design of the detector. The mechanical design, fabrication and deployment processes of the muon counters of the Unitary Cell are described in this document. These muon counters modules comprise sealed PVC casings containing plastic scintillation bars, wavelength-shifter optical fibers, 64 pixel photomultiplier tubes, and acquisition electronics. The modules are buried approximately 2.25 m below ground level in order to minimize contamination from electromagnetic shower particles. The mechanical setup, which allows access to the electronics for maintenance, is also described in addition to tests of the modules' response and integrity. The completed Unitary Cell has measured a number of air showers of which a first analysis of a sample event is included here.
△ Less
Submitted 12 May, 2016; v1 submitted 5 May, 2016;
originally announced May 2016.
-
Nanosecond-level time synchronization of autonomous radio detector stations for extensive air showers
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila
, et al. (426 additional authors not shown)
Abstract:
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected…
▽ More
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected to have an accuracy no better than about 5 ns. In practice, in particular in AERA, the GPS clocks exhibit drifts on the order of tens of ns. We developed a technique to correct for the GPS drifts, and an independent method is used for cross-checks that indeed we reach nanosecond-scale timing accuracy by this correction. First, we operate a "beacon transmitter" which emits defined sine waves detected by AERA antennas recorded within the physics data. The relative phasing of these sine waves can be used to correct for GPS clock drifts. In addition to this, we observe radio pulses emitted by commercial airplanes, the position of which we determine in real time from Automatic Dependent Surveillance Broadcasts intercepted with a software-defined radio. From the known source location and the measured arrival times of the pulses we determine relative timing offsets between radio detector stations. We demonstrate with a combined analysis that the two methods give a consistent timing calibration with an accuracy of 2 ns or better. Consequently, the beacon method alone can be used in the future to continuously determine and correct for GPS clock drifts in each individual event measured by AERA.
△ Less
Submitted 15 February, 2016; v1 submitted 7 December, 2015;
originally announced December 2015.
-
Simulations of the angular dependence of the dipole-dipole interaction among Rydberg atoms
Authors:
Jacob L. Bigelow,
Jacob T. Paul,
Matan Peleg,
Veronica L. Sanford,
Thomas J. Carroll,
Michael W. Noel
Abstract:
The dipole-dipole interaction between two Rydberg atoms depends on the relative orientation of the atoms and on the change in the magnetic quantum number. We simulate the effect of this anisotropy on the energy transport in an amorphous many atom system subject to a homogeneous applied electric field. We consider two experimentally feasible geometries and find that the effects should be measurable…
▽ More
The dipole-dipole interaction between two Rydberg atoms depends on the relative orientation of the atoms and on the change in the magnetic quantum number. We simulate the effect of this anisotropy on the energy transport in an amorphous many atom system subject to a homogeneous applied electric field. We consider two experimentally feasible geometries and find that the effects should be measurable in current generation imaging experiments. In both geometries atoms of $p$ character are localized to a small region of space which is immersed in a larger region that is filled with atoms of $s$ character. Energy transfer due to the dipole-dipole interaction can lead to a spread of $p$ character into the region initially occupied by $s$ atoms. Over long timescales the energy transport is confined to the volume near the border of the $p$ region which is suggestive of Anderson localization. We calculate a correlation length of 6.3~$μ$m for one particular geometry.
△ Less
Submitted 2 June, 2016; v1 submitted 27 October, 2015;
originally announced October 2015.
-
Image formation properties and inverse imaging problem in aperture based scanning near field optical microscopy
Authors:
S. Schmidt,
A. E. Klein,
T. Paul,
H. Gross,
S. Diziain,
M. Steinert,
A. C. Assafrao,
T. Pertsch,
H. P. Urbach,
C. Rockstuhl
Abstract:
Aperture based scanning near field optical microscopes are important instruments to study light at the nanoscale and to understand the optical functionality of photonic nanostructures. In general, a detected image is affected by both, the transverse electric and magnetic field components of light. The discrimination of the individual field components is challenging, as these four field components…
▽ More
Aperture based scanning near field optical microscopes are important instruments to study light at the nanoscale and to understand the optical functionality of photonic nanostructures. In general, a detected image is affected by both, the transverse electric and magnetic field components of light. The discrimination of the individual field components is challenging, as these four field components are contained within two signals in the case of a polarization-resolved measurement. Here, we develop a methodology to solve the inverse imaging problem and to retrieve the vectorial field components from polarization- and phase-resolved measurements. Our methodology relies on the discussion of the image formation process in aperture based scanning near field optical microscopes. On this basis, we are also able to explain how the relative contributions of the electric and magnetic field components within detected images depend on the probe geometry, its material composition, and the illumination wavelength. This allows to design probes that are dominantly sensitive either to the electric or magnetic field components of light.
△ Less
Submitted 7 January, 2016; v1 submitted 16 November, 2014;
originally announced November 2014.
-
NA61/SHINE facility at the CERN SPS: beams and detector system
Authors:
N. Abgrall,
O. Andreeva,
A. Aduszkiewicz,
Y. Ali,
T. Anticic,
N. Antoniou,
B. Baatar,
F. Bay,
A. Blondel,
J. Blumer,
M. Bogomilov,
M. Bogusz,
A. Bravar,
J. Brzychczyk,
S. A. Bunyatov,
P. Christakoglou,
T. Czopowicz,
N. Davis,
S. Debieux,
H. Dembinski,
F. Diakonos,
S. DiLuise,
W. Dominik,
T. Drozhzhova,
J. Dumarchez
, et al. (123 additional authors not shown)
Abstract:
NA61/SHINE (SPS Heavy Ion and Neutrino Experiment) is a multi-purpose experimental facility to study hadron production in hadron-proton, hadron-nucleus and nucleus-nucleus collisions at the CERN Super Proton Synchrotron. It recorded the first physics data with hadron beams in 2009 and with ion beams (secondary 7Be beams) in 2011.
NA61/SHINE has greatly profited from the long development of the C…
▽ More
NA61/SHINE (SPS Heavy Ion and Neutrino Experiment) is a multi-purpose experimental facility to study hadron production in hadron-proton, hadron-nucleus and nucleus-nucleus collisions at the CERN Super Proton Synchrotron. It recorded the first physics data with hadron beams in 2009 and with ion beams (secondary 7Be beams) in 2011.
NA61/SHINE has greatly profited from the long development of the CERN proton and ion sources and the accelerator chain as well as the H2 beamline of the CERN North Area. The latter has recently been modified to also serve as a fragment separator as needed to produce the Be beams for NA61/SHINE. Numerous components of the NA61/SHINE set-up were inherited from its predecessors, in particular, the last one, the NA49 experiment. Important new detectors and upgrades of the legacy equipment were introduced by the NA61/SHINE Collaboration.
This paper describes the state of the NA61/SHINE facility - the beams and the detector system - before the CERN Long Shutdown I, which started in March 2013.
△ Less
Submitted 19 January, 2014;
originally announced January 2014.
-
Measurements of Production Properties of K0S mesons and Lambda hyperons in Proton-Carbon Interactions at 31 GeV/c
Authors:
N. Abgrall,
A. Aduszkiewicz,
Y. Ali,
T. Anticic,
N. Antoniou,
J. Argyriades,
B. Baatar,
A. Blondel,
J. Blumer,
M. Bogomilov,
A. Bravar,
W. Brooks,
J. Brzychczyk,
S. A. Bunyatov,
O. Busygina,
P. Christakoglou,
T. Czopowicz,
N. Davis,
S. Debieux,
H. Dembinski,
F. Diakonos,
S. Di Luise,
W. Dominik,
T. Drozhzhova,
J. Dumarchez
, et al. (119 additional authors not shown)
Abstract:
Spectra of K0S mesons and Lambda hyperons were measured in p+C interactions at 31 GeV/c with the large acceptance NA61/SHINE spectrometer at the CERN SPS. The data were collected with an isotropic graphite target with a thickness of 4% of a nuclear interaction length. Interaction cross sections, charged pion spectra, and charged kaon spectra were previously measured using the same data set. Result…
▽ More
Spectra of K0S mesons and Lambda hyperons were measured in p+C interactions at 31 GeV/c with the large acceptance NA61/SHINE spectrometer at the CERN SPS. The data were collected with an isotropic graphite target with a thickness of 4% of a nuclear interaction length. Interaction cross sections, charged pion spectra, and charged kaon spectra were previously measured using the same data set. Results on K0S and Lambda production in p+C interactions serve as reference for the understanding of the enhancement of strangeness production in nucleus-nucleus collisions. Moreover, they provide important input for the improvement of neutrino flux predictions for the T2K long baseline neutrino oscillation experiment in Japan. Inclusive production cross sections for K0S and Lambda are presented as a function of laboratory momentum in intervals of the laboratory polar angle covering the range from 0 up to 240 mrad. The results are compared with predictions of several hadron production models. The K0S mean multiplicity in production processes <n_K0S> and the inclusive cross section for K0S production were measured and amount to 0.127 +- 0.005 (stat) +- 0.022 (sys) and 29.0 +- 1.6 (stat) +- 5.0 (sys) mb, respectively.
△ Less
Submitted 8 September, 2013;
originally announced September 2013.
-
Impedance generalization for plasmonic waveguides beyond the lumped circuit model
Authors:
Thomas Kaiser,
Shakeeb Bin Hasan,
Thomas Paul,
Thomas Pertsch,
Carsten Rockstuhl
Abstract:
We analytically derive a rigorous expression for the relative impedance ratio between two photonic structures based on their electromagnetic interaction. Our approach generalizes the physical meaning of the impedance to a measure for the reciprocity-based overlap of eigenmodes. The consistence with known cases in the radiofrequency and optical domain is shown. The analysis reveals where the applic…
▽ More
We analytically derive a rigorous expression for the relative impedance ratio between two photonic structures based on their electromagnetic interaction. Our approach generalizes the physical meaning of the impedance to a measure for the reciprocity-based overlap of eigenmodes. The consistence with known cases in the radiofrequency and optical domain is shown. The analysis reveals where the applicability of simple circuit parameters ends and how the impedance can be interpreted beyond this point. We illustrate our approach by successfully describing a Bragg reflector that terminates an insulator-metal-insulator plasmonic waveguide in the near-infrared by our mpedance concept.
△ Less
Submitted 17 July, 2013; v1 submitted 14 May, 2013;
originally announced May 2013.
-
Contribution of the magnetic resonance to the third harmonic generation from a fishnet metamaterial
Authors:
J. Reinhold,
M. R. Shcherbakov,
A. Chipouline,
V. I. Panov,
C. Helgert,
T. Paul,
C. Rockstuhl,
F. Lederer,
E. -B. Kley,
A. Tünnermann,
A. A. Fedyanin,
T. Pertsch
Abstract:
We investigate experimentally and theoretically the third harmonic generated by a double-layer fishnet metamaterial. To unambiguously disclose most notably the influence of the magnetic resonance, the generated third harmonic was measured as a function of the angle of incidence. It is shown experimentally and numerically that when the magnetic resonance is excited by pump beam, the angular depende…
▽ More
We investigate experimentally and theoretically the third harmonic generated by a double-layer fishnet metamaterial. To unambiguously disclose most notably the influence of the magnetic resonance, the generated third harmonic was measured as a function of the angle of incidence. It is shown experimentally and numerically that when the magnetic resonance is excited by pump beam, the angular dependence of the third harmonic signal has a local maximum at an incidence angle of θ \simeq 20°. This maximum is shown to be a fingerprint of the antisymmetric distribution of currents in the gold layers. An analytical model based on the nonlinear dynamics of the electrons inside the gold shows excellent agreement with experimental and numerical results. This clearly indicates the difference in the third harmonic angular pattern at electric and magnetic resonances of the metamaterial.
△ Less
Submitted 22 November, 2012; v1 submitted 11 August, 2012;
originally announced August 2012.
-
Summary Report of JEM-EUSO Workshop at KICP in Chicago
Authors:
J. H. Adams Jr,
L. A. Anchordoqui,
M. Bertaina,
M. J. Christl,
V. Connaughton,
S. E. Csorna,
T. Ebisuzaki,
G. Medina-Tanco,
A. V. Olinto,
T. Paul,
P. Picozza,
A. Santangelo,
K. Shinozaki,
T. J. Weiler,
L. Wiencke
Abstract:
This document contains a summary of the workshop which took place on 22 - 24 February 2012 at the Kavli Institute of Cosmological Physics in the University of Chicago. The goal of the workshop was to discuss the physics reach of the JEM-EUSO mission and how best to implement a global ground based calibration system for the instrument to realize the physics goal of unveiling the origin of the highe…
▽ More
This document contains a summary of the workshop which took place on 22 - 24 February 2012 at the Kavli Institute of Cosmological Physics in the University of Chicago. The goal of the workshop was to discuss the physics reach of the JEM-EUSO mission and how best to implement a global ground based calibration system for the instrument to realize the physics goal of unveiling the origin of the highest energy cosmic rays.
△ Less
Submitted 28 May, 2012; v1 submitted 15 March, 2012;
originally announced March 2012.
-
The Pierre Auger Observatory V: Enhancements
Authors:
The Pierre Auger Collaboration,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. F. M. Albuquerque,
D. Allard,
I. Allekotte,
J. Allen,
P. Allison,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
A. Aminaei,
L. Anchordoqui,
S. Andringa,
T. Antičić,
A. Anzalone,
C. Aramo,
E. Arganda,
F. Arqueros,
H. Asorey,
P. Assis,
J. Aublin,
M. Ave,
M. Avenier
, et al. (471 additional authors not shown)
Abstract:
Ongoing and planned enhancements of the Pierre Auger Observatory
Ongoing and planned enhancements of the Pierre Auger Observatory
△ Less
Submitted 24 July, 2011;
originally announced July 2011.
-
The Pierre Auger Observatory IV: Operation and Monitoring
Authors:
The Pierre Auger Collaboration,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. F. M. Albuquerque,
D. Allard,
I. Allekotte,
J. Allen,
P. Allison,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
A. Aminaei,
L. Anchordoqui,
S. Andringa,
T. Antičić,
A. Anzalone,
C. Aramo,
E. Arganda,
F. Arqueros,
H. Asorey,
P. Assis,
J. Aublin,
M. Ave,
M. Avenier
, et al. (471 additional authors not shown)
Abstract:
Technical reports on operations and monitoring of the Pierre Auger Observatory
Technical reports on operations and monitoring of the Pierre Auger Observatory
△ Less
Submitted 24 July, 2011;
originally announced July 2011.
-
Isotropic and non-diffracting optical metamaterials
Authors:
Thomas Paul,
Christoph Menzel,
Carsten Rockstuhl,
Falk Lederer
Abstract:
Optical metamaterials have the potential to control the flow of light at will which may lead to spectacular applications as the perfect lens or the cloaking device. Both of these optical elements require invariant effective material properties (permittivity, permeability) for all spatial frequencies involved in the imaging process. However, it turned out that due to the mesoscopic nature of curr…
▽ More
Optical metamaterials have the potential to control the flow of light at will which may lead to spectacular applications as the perfect lens or the cloaking device. Both of these optical elements require invariant effective material properties (permittivity, permeability) for all spatial frequencies involved in the imaging process. However, it turned out that due to the mesoscopic nature of current metamaterials spatial dispersion prevents to meet this requirement; rendering them far away from being applicable for the purpose of imaging. A solution to this problem is not straightforwardly at hand since metamaterials are usually designed in forward direction; implying that the optical properties are only evaluated for a specific metamaterial. Here we lift these limitations. Methodically, we suggest a procedure to design metamaterials with a predefined characteristic of light propagation. Optically, we show that metamaterials can be optimized such that they exhibit either an isotropic response or permit diffractionless propagation.
△ Less
Submitted 8 September, 2009;
originally announced September 2009.
-
A simple and versatile analytical approach for planar metamaterials
Authors:
J. Petschulat,
A. Chipouline,
A. Tuennermann,
T. Pertsch,
C. Menzel,
C. Rockstuhl,
T. Paul,
F. Lederer
Abstract:
We present an analytical model which permits the calculation of effective material parameters for planar metamaterials consisting of arbitrary unit cells (metaatoms) formed by a set of straight wire sections of potentially different shape. The model takes advantage of resonant electric dipole oscillations in the wires and their mutual coupling. The pertinent form of the metaatom determines the a…
▽ More
We present an analytical model which permits the calculation of effective material parameters for planar metamaterials consisting of arbitrary unit cells (metaatoms) formed by a set of straight wire sections of potentially different shape. The model takes advantage of resonant electric dipole oscillations in the wires and their mutual coupling. The pertinent form of the metaatom determines the actual coupling features. This procedure represents a kind of building block model for quite different metaatoms. Based on the parameters describing the individual dipole oscillations and their mutual coupling the entire effective metamaterial tensor can be determined. By knowing these parameters for a certain metaatom it can be systematically modified to create the desired features. Performing such modifications effective material properties as well as the far field intensities remain predictable. As an example the model is applied to reveal the occurrence of optical activity if the split ring resonator metaatom is modified to L- or S-shaped metaatoms.
△ Less
Submitted 11 January, 2010; v1 submitted 3 September, 2009;
originally announced September 2009.
-
Validity of effective material parameters for optical fishnet metamaterials
Authors:
Christoph Menzel,
Thomas Paul,
Carsten Rockstuhl,
Thomas Pertsch,
Sergei Tretyakov,
Falk Lederer
Abstract:
Although optical metamaterials that show artificial magnetism are mesoscopic systems, they are frequently described in terms of effective material parameters. But due to intrinsic nonlocal (or spatially dispersive) effects it may be anticipated that this approach is usually only a crude approximation and is physically meaningless. In order to study the limitations regarding the assignment of eff…
▽ More
Although optical metamaterials that show artificial magnetism are mesoscopic systems, they are frequently described in terms of effective material parameters. But due to intrinsic nonlocal (or spatially dispersive) effects it may be anticipated that this approach is usually only a crude approximation and is physically meaningless. In order to study the limitations regarding the assignment of effective material parameters, we present a technique to retrieve the frequency-dependent elements of the effective permittivity and permeability tensors for arbitrary angles of incidence and apply the method exemplarily to the fishnet metamaterial. It turns out that for the fishnet metamaterial, genuine effective material parameters can only be introduced if quite stringent constraints are imposed on the wavelength/unit cell size ratio. Unfortunately they are only met far away from the resonances that induce a magnetic response required for many envisioned applications of such a fishnet metamaterial. Our work clearly indicates that the mesoscopic nature and the related spatial dispersion of contemporary optical metamaterials that show artificial magnetism prohibits the meaningful introduction of conventional effective material parameters.
△ Less
Submitted 19 January, 2010; v1 submitted 17 August, 2009;
originally announced August 2009.
-
Trapping Rossby waves
Authors:
Christophe Cheverry,
Isabelle Gallagher,
Thierry Paul,
Laure Saint-Raymond
Abstract:
Waves associated to large scale oceanic motions are gravity waves (Poincaré waves which disperse fast) and quasigeostrophic waves (Rossby waves). In this Note, we show by semiclassical arguments, that Rossby waves can be trapped and we characterize the corresponding initial conditions.
Waves associated to large scale oceanic motions are gravity waves (Poincaré waves which disperse fast) and quasigeostrophic waves (Rossby waves). In this Note, we show by semiclassical arguments, that Rossby waves can be trapped and we characterize the corresponding initial conditions.
△ Less
Submitted 20 January, 2009;
originally announced January 2009.
-
Three-dimensional chiral meta-atoms
Authors:
Carsten Rockstuhl,
Christoph Menzel,
Thomas Paul,
Falk Lederer
Abstract:
We show that the chirality of artificial media, made of a planar periodic arrangement of three-dimensional metallic meta-atoms, can be tailored. The meta-atoms support localized plasmon polaritons and exhibit a chirality exceeding that of pseudo-planar chiral metamaterials by an order of magnitude. Two design approaches are investigated in detail. The first is the referential example for a chira…
▽ More
We show that the chirality of artificial media, made of a planar periodic arrangement of three-dimensional metallic meta-atoms, can be tailored. The meta-atoms support localized plasmon polaritons and exhibit a chirality exceeding that of pseudo-planar chiral metamaterials by an order of magnitude. Two design approaches are investigated in detail. The first is the referential example for a chiral structure, namely a Moebius strip. The second example is a cut wire - split-ring resonator geometry that can be manufactured with state-of-the-art nanofabrication technologies. Driven into resonance these meta-atoms evoke a polarization rotation of $30^\circ$ per unit cell.
△ Less
Submitted 18 September, 2008;
originally announced September 2008.
-
Nonlinear Resonant Transport of Bose Einstein Condensates
Authors:
Tobias Paul,
Klaus Richter,
Peter Schlagheck
Abstract:
The coherent flow of a Bose-Einstein condensate through a quantum dot in a magnetic waveguide is studied. By the numerical integration of the time-dependent Gross-Pitaevskii equation in presence of a source term, we simulate the propagation process of the condensate through a double barrier potential in the waveguide. We find that resonant transport is suppressed in interaction-induced regimes o…
▽ More
The coherent flow of a Bose-Einstein condensate through a quantum dot in a magnetic waveguide is studied. By the numerical integration of the time-dependent Gross-Pitaevskii equation in presence of a source term, we simulate the propagation process of the condensate through a double barrier potential in the waveguide. We find that resonant transport is suppressed in interaction-induced regimes of bistability, where multiple scattering states exist at the same chemical potential and the same incident current. We demonstrate, however, that a temporal control of the external potential can be used to circumvent this limitation and to obtain enhanced transmission near the resonance on experimentally realistic time scales.
△ Less
Submitted 19 July, 2004;
originally announced July 2004.
