Showing 1–40 of 40 results for author: Papadakis, G

Forecasting the evolution of three-dimensional turbulent recirculating flows from sparse sensor data

Authors: George Papadakis, Shengqi Lu

Abstract: A data-driven algorithm is proposed that employs sparse data from velocity and/or scalar sensors to forecast the future evolution of three dimensional turbulent flows. The algorithm combines time-delayed embedding together with Koopman theory and linear optimal estimation theory. It consists of 3 steps; dimensionality reduction (currently POD), construction of a linear dynamical system for current… ▽ More A data-driven algorithm is proposed that employs sparse data from velocity and/or scalar sensors to forecast the future evolution of three dimensional turbulent flows. The algorithm combines time-delayed embedding together with Koopman theory and linear optimal estimation theory. It consists of 3 steps; dimensionality reduction (currently POD), construction of a linear dynamical system for current and future POD coefficients and system closure using sparse sensor measurements. In essence, the algorithm establishes a mapping from current sparse data to the future state of the dominant structures of the flow over a specified time window. The method is scalable (i.e.\ applicable to very large systems), physically interpretable, and provides sequential forecasting on a sliding time window of prespecified length. It is applied to the turbulent recirculating flow over a surface-mounted cube (with more than $10^8$ degrees of freedom) and is able to forecast accurately the future evolution of the most dominant structures over a time window at least two orders of magnitude larger that the (estimated) Lyapunov time scale of the flow. Most importantly, increasing the size of the forecasting window only slightly reduces the accuracy of the estimated future states. Extensions of the method to include convolutional neural networks for more efficient dimensionality reduction and moving sensors are also discussed. △ Less

Submitted 9 May, 2025; originally announced May 2025.

On the low drag regime of flatback airfoils

Authors: Konstantinos Kellaris, George Papadakis, Miguel Alfonso Mendez, Marinos Manolesos

Abstract: Flatback airfoils, characterized by a blunt trailing edge, are used at the root of large wind turbine blades. A low-drag pocket has recently been identified in the flow past these airfoils at high angles of attack, potentially offering opportunities for enhanced energy extraction. This study uses three-dimensional Detached Eddy Simulations (DES) combined with statistical and data-driven modal anal… ▽ More Flatback airfoils, characterized by a blunt trailing edge, are used at the root of large wind turbine blades. A low-drag pocket has recently been identified in the flow past these airfoils at high angles of attack, potentially offering opportunities for enhanced energy extraction. This study uses three-dimensional Detached Eddy Simulations (DES) combined with statistical and data-driven modal analysis techniques to explore the aerodynamics and coherent structures of a flatback airfoil in these conditions. Two angles of attack - one inside $\left(12^{\circ}\right)$ and one outside $\left(0^{\circ}\right)$ of the low-drag pocket - are examined more thoroughly. The spanwise correlation length of secondary instability is analyzed in terms of autocorrelation of the $Γ_{1}$ vortex identification criterion, while coherent structures were extracted via the multiscale Proper Orthogonal Decomposition (mPOD). The results show increased base pressure, BL thickness, vortex formation length, and more organized wake structures inside the low-drag regime. While the primary instability (Bénard-von Kármán vortex street) dominates in both cases, the secondary instability is distinguishable only for the $12^{\circ}$ case and is identified as a Mode S$^{\prime}$ instability. △ Less

Submitted 14 October, 2024; originally announced October 2024.

Comments: 27 pages, 25 figures, submitted to Physical Review Fluids

Coherent Thermal Emission from Large-Scale Suspended Nanomechanical Membranes

Authors: Mitradeep Sarkar, Rajashree Haldankar, Julien Legendre, Gloria Davidova, Adrian Bachtold, Georgia T. Papadakis

Abstract: Thermal radiation is an abundant form of incoherent light. Generating coherent infrared light through incandescence promises a cheap alternative to the costly and epitaxially complex quantum cascade laser, however it remains a fundamental challenge. Previous approaches leveraged the spatial coherence of polaritonic excitations that occur in the thermal near-field, by diffracting them into the far-… ▽ More Thermal radiation is an abundant form of incoherent light. Generating coherent infrared light through incandescence promises a cheap alternative to the costly and epitaxially complex quantum cascade laser, however it remains a fundamental challenge. Previous approaches leveraged the spatial coherence of polaritonic excitations that occur in the thermal near-field, by diffracting them into the far-field zone via patterned micro- or nano-scatterers. This approach requires high-resolution lithography, is difficult to scale-up, and yields limited outcoupled radiation due to the intrinsically polarized nature of polaritons. We overcome these limitations and report coherent thermal emission through simple wave interference. We show that unpatterned, millimeter-scale, suspended nanomechanical membranes of SiC operate for both linear polarizations and exhibit antenna-like directionality without relying on the excitation of near-field polaritons. The ability to generate polarization-insensitive, narrowband and spatially coherent incandescent light without lithography at large scales paves the way towards democratizing thermal infrared technologies. △ Less

Submitted 4 September, 2024; originally announced September 2024.

Mid-IR chirality and chiral thermal emission through twisting

Authors: Michael T. Enders, Mitradeep Sarkar, Evgenia Klironomou, Michela Florinda Picardi, Riccardo Bertini, Aleksandra Deeva, Georgia T. Papadakis

Abstract: Chirality in the mid-infrared spectral range plays a crucial role across physical, chemical, and biological sciences, yet sources of chiral infrared light do not currently exist. Their development, using principles from the mature field of metamaterials, requires complex three-dimensional architectures that call for high-resolution lithography. We leverage the natural optical anisotropy found in s… ▽ More Chirality in the mid-infrared spectral range plays a crucial role across physical, chemical, and biological sciences, yet sources of chiral infrared light do not currently exist. Their development, using principles from the mature field of metamaterials, requires complex three-dimensional architectures that call for high-resolution lithography. We leverage the natural optical anisotropy found in several van der Waals crystals, for example $α$-MoO$_3$, to demonstrate experimentally that its twisted bilayers break inversion-rotation symmetry and are thereby intrinsically chiral. Via direct thermal emission measurements of microscopic twisted bilayers, we demonstrate that these heterostructures generate chiral light through incandescence. Twisted configurations of van der Waals materials do not require any lithography, and offer a platform for large-scale chiral filters and thermal sources beyond conventional meta-architectures. △ Less

Submitted 13 June, 2025; v1 submitted 4 September, 2024; originally announced September 2024.

Nonreciprocity in transmission mode with planar structures for arbitrarily polarized light

Authors: Michela F. Picardi, Vera I. Moerbeek, Mariano Pascale, Georgia Papadakis

Abstract: Approaching thermodynamic limits in light harvesting requires enabling nonreciprocal thermal emission. The majority of previously reported nonreciprocal thermal emitters operate in reflection mode, following original proposals by M. Green and others. In these proposals, cascaded nonreciprocal junctions that re-direct each junction's emission towards a subsequent one are employed for efficient ligh… ▽ More Approaching thermodynamic limits in light harvesting requires enabling nonreciprocal thermal emission. The majority of previously reported nonreciprocal thermal emitters operate in reflection mode, following original proposals by M. Green and others. In these proposals, cascaded nonreciprocal junctions that re-direct each junction's emission towards a subsequent one are employed for efficient light-harvesting. Recently, simplified concepts have been proposed in solar photovoltaics and thermophotovoltaics that leverage the concept of tandem junctions to approach thermodynamic limits. In these simplified scenarios, polarization-independent nonreciprocal response in transmission mode is required. We propose a pattern-free heterostructure that enables such functionality, using a magneto-optical material embedded between two dissimilar dielectric layers. △ Less

Submitted 9 May, 2024; originally announced May 2024.

Comments: 9 pages, 6 figures

Design of narrowband infrared emitters by hybridizing guided-mode resonance structures with van der Waals materials

Authors: Mehrdad Shokooh-Saremi, Maxime Giteau, Mitradeep Sarkar, Georgia T. Papadakis

Abstract: In this paper, narrowband emitters have been designed using particle swarm optimization (PSO) in the 10-20 μm infrared range. The device structure consists of an anisotropic α-MoO3 layer combined with the one- and two-dimensional guided-mode resonance structures. Well-defined absorption lines are present in the reflection spectrum for both TE and TM polarizations, thereby yielding narrowband emiss… ▽ More In this paper, narrowband emitters have been designed using particle swarm optimization (PSO) in the 10-20 μm infrared range. The device structure consists of an anisotropic α-MoO3 layer combined with the one- and two-dimensional guided-mode resonance structures. Well-defined absorption lines are present in the reflection spectrum for both TE and TM polarizations, thereby yielding narrowband emissivity at desired wavelengths. The band structure of the designed emitters under TM polarization demonstrates distinct features unlike its TE counterpart. These features are attributed to the interaction between guided-mode resonances and phonon polaritons. The results are relevant for applications in active and passive photonic elements in mid- and long-wave IR bands. △ Less

Submitted 20 February, 2024; originally announced February 2024.

Hot-carrier thermophotovoltaic systems

Authors: Kartika N. Nimje, Maxime Giteau, Georgia T. Papadakis

Abstract: A thermophotovoltaic (TPV) energy converter harnesses thermal photons emitted by a hot body and converts them to electricity. When the radiative heat exchange between the emitter and PV cell is spectrally monochromatic, the TPV system can approach the Carnot thermodynamic efficiency limit. Nonetheless, this occurs at the expense of vanishing extracted electrical power density. Conversely, a spectr… ▽ More A thermophotovoltaic (TPV) energy converter harnesses thermal photons emitted by a hot body and converts them to electricity. When the radiative heat exchange between the emitter and PV cell is spectrally monochromatic, the TPV system can approach the Carnot thermodynamic efficiency limit. Nonetheless, this occurs at the expense of vanishing extracted electrical power density. Conversely, a spectrally broadband radiative heat exchange between the emitter and the cell yields maximal TPV power density at the expense of low efficiency. By leveraging hot-carriers as a means to mitigate thermalization losses within the cell, we demonstrate that one can alleviate this trade-off between power density and efficiency. Via detailed balance analysis, we show analytically that one can reach near-Carnot conversion efficiencies close to the maximum power point, which is unattainable with conventional TPV systems. We derive analytical relations between intrinsic device parameters and performance metrics, which serve as design rules for hot-carrier-based TPV systems. △ Less

Submitted 8 November, 2023; originally announced November 2023.

Comments: 10 pages, 7 figures

Deep-subwavelength Phase Retarders at Mid-Infrared Frequencies with van der Waals Flakes

Authors: Michael T. Enders, Mitradeep Sarkar, Aleksandra Deeva, Maxime Giteau, Hanan Herzig Sheinfux, Mehrdad Shokooh-Saremi, Frank H. L. Koppens, Georgia T. Papadakis

Abstract: Phase retardation is a cornerstone of modern optics, yet, at mid-infrared (mid-IR) frequencies, it remains a major challenge due to the scarcity of simultaneously transparent and birefringent crystals. Most materials resonantly absorb due to lattice vibrations occurring at mid-IR frequencies, and natural birefringence is weak, calling for hundreds of microns to millimeters-thick phase retarders fo… ▽ More Phase retardation is a cornerstone of modern optics, yet, at mid-infrared (mid-IR) frequencies, it remains a major challenge due to the scarcity of simultaneously transparent and birefringent crystals. Most materials resonantly absorb due to lattice vibrations occurring at mid-IR frequencies, and natural birefringence is weak, calling for hundreds of microns to millimeters-thick phase retarders for sufficient polarization rotation. We demonstrate mid-IR phase retardation with flakes of $α$-molybdenum trioxide ($α$-MoO$_3$) that are more than ten times thinner than the operational wavelength, achieving 90 degrees polarization rotation within one micrometer of material. We report conversion ratios above 50% in reflection and transmission mode, and wavelength tunability by several micrometers. Our results showcase that exfoliated flakes of low-dimensional crystals can serve as a platform for mid-IR miniaturized integrated polarization control. △ Less

Submitted 29 June, 2023; v1 submitted 28 June, 2023; originally announced June 2023.

Comments: 8 pages, 5 figures

An Overset Algorithm for Multiphase Flows using 3D Multiblock Polyhedral Meshes

Authors: Spiros Zafeiris, George Papadakis

Abstract: In this study, we present a parallel topology algorithm with a suitable interpolation method for chimera simulations in CFD. The implementation is done in the unstructured Finite Volume (FV) framework and special attention is given to the numerical algorithm. The aim of the proposed algorithm is to approximate fields with discontinuities with application to two-phase incompressible flows. First, t… ▽ More In this study, we present a parallel topology algorithm with a suitable interpolation method for chimera simulations in CFD. The implementation is done in the unstructured Finite Volume (FV) framework and special attention is given to the numerical algorithm. The aim of the proposed algorithm is to approximate fields with discontinuities with application to two-phase incompressible flows. First, the overset topology problem in partitioned polyhedral meshes is addressed, and then a new interpolation algorithm for generally discontinuous fields is introduced. We describe how the properties of FV are used in favor of the interpolation algorithm and how this intuitive process helps to achieve high-resolution results. The performance of the proposed algorithm is quantified and tested in various test cases, together with a comparison with an already existing interpolation scheme. Finally, scalability tests are presented to prove computational efficiency. The method suggests to be highly accurate in propagation cases and performs well in unsteady two-phase problems executed in parallel architectures. △ Less

Submitted 26 May, 2023; originally announced May 2023.

Retrieving optical parameters of emerging van der Waals flakes

Authors: Mitradeep Sarkar, Michael T. Enders, Mehrdad Shokooh-Saremi, Kenji Watanabe, Takashi Taniguchi, Hanan Herzig Sheinfux, Frank H. L. Koppens, Georgia Theano Papadakis

Abstract: High-quality low-dimensional layered and van der Waals materials are typically exfoliated, with sample cross sectional areas on the order of tens to hundreds of microns. The small size of flakes makes the experimental characterization of their dielectric properties unsuitable with conventional spectroscopic ellipsometry, due to beam-sample size mismatch and non-uniformities of the crystal axes. Pr… ▽ More High-quality low-dimensional layered and van der Waals materials are typically exfoliated, with sample cross sectional areas on the order of tens to hundreds of microns. The small size of flakes makes the experimental characterization of their dielectric properties unsuitable with conventional spectroscopic ellipsometry, due to beam-sample size mismatch and non-uniformities of the crystal axes. Previously, the experimental measurement of the dielectrirc permittivity of such microcrystals was carried out with near-field tip-based scanning probes. These measurements are sensitive to external conditions like vibrations and temperature, and require non-deterministic numerical fitting to some a priori known model. We present an alternative method to extract the in-plane dielectric permittivity of van der Waals microcrystals, based on identifying reflectance minima in spectroscopic measurements. Our method does not require complex fitting algorithms nor near field tip-based measurements and accommodates for small-area samples. We demonstrate the robustness of our method using hexagonal boron nitride and α-MoO3, and recover their dielectric permittivities that are close to literature values. △ Less

Submitted 29 May, 2023; v1 submitted 23 May, 2023; originally announced May 2023.

Comments: 10 pages, 4 figure and 3 tables

Investigation of Submergence Depth and Wave-Induced Effects on the Performance of a Fully Passive Energy Harvesting Flapping Foil Operating Beneath the Free Surface

Authors: Nikolaos Petikidis, George Papadakis

Abstract: This paper investigates the performance of a fully passive flapping foil device for energy harvesting in a free surface flow. The study uses numerical simulations to examine the effects of varying submergence depths and the impact of monochromatic waves on the foil's performance. The results show that the fully passive flapping foil device can achieve high efficiency for submergence depths between… ▽ More This paper investigates the performance of a fully passive flapping foil device for energy harvesting in a free surface flow. The study uses numerical simulations to examine the effects of varying submergence depths and the impact of monochromatic waves on the foil's performance. The results show that the fully passive flapping foil device can achieve high efficiency for submergence depths between 4 and 9 chords, with an "optimum" submergence depth where the flapping foil performance is maximised. The performance was found to be correlated with the resonant frequency of the heaving motion and its proximity to the damped natural frequency. The effects of regular waves on the foil's performance were also investigated, showing that waves with a frequency close to that of the natural frequency of the flapping foil aided energy harvesting. Overall, this study provides insights that could be useful for future design improvements for fully passive flapping foil devices for energy harvesting operating near the free surface. △ Less

Submitted 19 April, 2023; originally announced April 2023.

Thermodynamic performance bounds for radiative heat engines

Authors: Maxime Giteau, Michela F. Picardi, Georgia T. Papadakis

Abstract: Heat engines cannot generally operate at maximum power and efficiency, imposing a trade-off between the two. Here, we highlight the exact nature of this trade-off for engines that exchange heat radiatively with a hot source. We derive simple analytical expressions for the performance bounds of reciprocal and nonreciprocal radiative heat engines. We also highlight that radiative engines can achieve… ▽ More Heat engines cannot generally operate at maximum power and efficiency, imposing a trade-off between the two. Here, we highlight the exact nature of this trade-off for engines that exchange heat radiatively with a hot source. We derive simple analytical expressions for the performance bounds of reciprocal and nonreciprocal radiative heat engines. We also highlight that radiative engines can achieve a better power-efficiency trade-off than linear ones. These bounds are especially relevant for thermophotovoltaics, offering useful metrics against which to compare device performance. △ Less

Submitted 18 December, 2023; v1 submitted 8 April, 2023; originally announced April 2023.

Comments: 7 pages, 6 figures

Maximal Violation of Kirchhoff's Law in Planar Heterostructures

Authors: Lu Wang, F. Javier García de Abajo, Georgia T. Papadakis

Abstract: Violating Kirchhoff's law has so far required nonreciprocal materials patterned in microstructures. In these configurations, the excitation of a guided or polaritonic mode that lies outside the light cone, often via gratings, was a requirement. Here, we describe how nonreciprocity manifests itself in pattern-free heterostructures. We demonstrate that a resonant mode in a dielectric spacer separati… ▽ More Violating Kirchhoff's law has so far required nonreciprocal materials patterned in microstructures. In these configurations, the excitation of a guided or polaritonic mode that lies outside the light cone, often via gratings, was a requirement. Here, we describe how nonreciprocity manifests itself in pattern-free heterostructures. We demonstrate that a resonant mode in a dielectric spacer separating a nonreciprocal film from a back-reflector suffices to maximally violate Kirchhoff's law, and identify the minimal dielectric requirements for such functionality, which are satisfied by currently available materials. △ Less

Submitted 18 February, 2023; originally announced February 2023.

Design rules for active control of narrowband thermal emission using phase-change materials

Authors: Maxime Giteau, Mitradeep Sarkar, Maria Paula Ayala, Michael T. Enders, Georgia T. Papadakis

Abstract: We propose an analytical framework to design actively tunable narrowband thermal emitters at infrared frequencies. We exemplify the proposed design rules using phase-change materials (PCM), considering dielectric-to-dielectric PCMs (e.g. GSST) and dielectric-to-metal PCMs (e.g. $\mathrm{VO_2}$). Based on these, we numerically illustrate near-unity ON-OFF switching and arbitrarily large spectral sh… ▽ More We propose an analytical framework to design actively tunable narrowband thermal emitters at infrared frequencies. We exemplify the proposed design rules using phase-change materials (PCM), considering dielectric-to-dielectric PCMs (e.g. GSST) and dielectric-to-metal PCMs (e.g. $\mathrm{VO_2}$). Based on these, we numerically illustrate near-unity ON-OFF switching and arbitrarily large spectral shifting between two emission wavelengths, respectively. The proposed systems are lithography-free and consist of one or several thin emitter layers, a spacer layer which includes the PCM, and a back reflector. Our model applies to normal incidence, though we show that the behavior is essentially angle-independent. The presented formalism is general and can be extended to \textit{any} mechanism that modifies the optical properties of a material, such as electrostatic gating or thermo-optical modulation. △ Less

Submitted 18 May, 2023; v1 submitted 5 October, 2022; originally announced October 2022.

Comments: 11 pages, 7 figures

Dynamic modulation of thermal emission -- a Tutorial

Authors: Michela Florinda Picardi, Kartika Narayan Nimje, Georgia T. Papadakis

Abstract: Thermal emission is typically associated with a blackbody at a temperature above absolute zero, which exchanges energy with its environment in the form of radiation. Blackbody thermal emission is largely incoherent both spatially and temporally. Using principles in nanophotonics, thermal emission with characteristics that differ considerably from those of a blackbody have been demonstrated. In par… ▽ More Thermal emission is typically associated with a blackbody at a temperature above absolute zero, which exchanges energy with its environment in the form of radiation. Blackbody thermal emission is largely incoherent both spatially and temporally. Using principles in nanophotonics, thermal emission with characteristics that differ considerably from those of a blackbody have been demonstrated. In particular, by leveraging intrinsic properties of emerging materials or via nanostructuring at the wavelength or sub-wavelength scale, one can gain control over the directionality, temporal coherence, and other more exotic properties of thermal radiation. Typically, however, these are fixed at the time of fabrication. Gaining dynamic control of thermal emission requires exploiting external mechanisms that actively modulate radiative properties. Numerous applications can benefit from such thermal emission control, for example in solar energy harvesting, thermo-photovoltaic energy conversion, radiative cooling, sensing, spectroscopy, imaging and thermal camouflage. In this tutorial, we introduce thermal emission in two domains: the far-field, and the near-field, and we outline experimental approaches for probing thermal radiation in both ranges. We discuss ways for tailoring the spatial and temporal coherence of thermal emission and present available mechanisms to actively tune these characteristics. △ Less

Submitted 20 March, 2023; v1 submitted 4 October, 2022; originally announced October 2022.

Comments: 19 pages, 14 figures, tutorial

Journal ref: Journal of Applied Physics 133, 111101 (2023)

Lithography-free directional control of thermal emission

Authors: Mitradeep Sarkar, Maxime Giteau, Michael Enders, Georgia T. Papadakis

Abstract: Blackbody thermal emission is spatially diffuse. Achieving highly directional thermal emission typically requires nanostructuring the surface of the thermally emissive medium. The most common configuration is a subwavelength grating that scatters surface polaritonic modes from the near-field to the far-field and produces antenna-like lobes of thermal emission. This concept, however, is typically l… ▽ More Blackbody thermal emission is spatially diffuse. Achieving highly directional thermal emission typically requires nanostructuring the surface of the thermally emissive medium. The most common configuration is a subwavelength grating that scatters surface polaritonic modes from the near-field to the far-field and produces antenna-like lobes of thermal emission. This concept, however, is typically limited to a particular linear polarization, and requires sophisticated lithography. Here, we revisit the simple motif of a planar Salisbury screen. We show analytically how the interplay between the real and imaginary part of the dielectric permittivity of the emitter layer defines the directional characteristics of emission, which can range from diffuse to highly directional. We propose a realistic configuration and show that hexagonal Boron Nitride thin films can enable grating-like thermal emission lobes in a lithography-free platform. △ Less

Submitted 3 October, 2022; originally announced October 2022.

Perspective on Near-Field Radiative Heat Transfer

Authors: Mariano Pascale, Maxime Giteau, Georgia T. Papadakis

Abstract: Although near-field radiative heat transfer was introduced in the 1950's, interest in the field has recently revived, as the effect promises improved performance in various applications where contactless temperature regulation in the small-scale is a requirement. With progress in computational electromagnetics as well as in nanoinstrumentation, it has become possible to simulate the effect in comp… ▽ More Although near-field radiative heat transfer was introduced in the 1950's, interest in the field has recently revived, as the effect promises improved performance in various applications where contactless temperature regulation in the small-scale is a requirement. With progress in computational electromagnetics as well as in nanoinstrumentation, it has become possible to simulate the effect in complex configurations and to measure it with high precision. In this Perspective, we highlight key theoretical and experimental advances in the field, and we discuss important developments in tailoring and enhancing near-field thermal emission and heat transfer. We discuss opportunities in heat-to-electricity energy conversion with thermophotovoltaic systems, as well as non-reciprocal heat transfer, as two of many recent focus topics in the field. Finally, we highlight key experimental challenges and opportunities with emerging materials, for probing near-field heat transfer for relevant technologies in the large-scale. △ Less

Submitted 8 March, 2023; v1 submitted 3 October, 2022; originally announced October 2022.

Reconstruction of irregular flow dynamics around two square cylinders from sparse measurements using a data-driven algorithm

Authors: Flavio Savarino, George Papadakis

Abstract: We propose a data-driven algorithm for reconstructing the irregular, chaotic flow dynamics around two side-by-side square cylinders from sparse, time-resolved, velocity measurements in the wake. We use Proper Orthogonal Decomposition (POD) to reduce the dimensionality of the problem and then explore two different reconstruction approaches: in the first approach, we use the subspace system identifi… ▽ More We propose a data-driven algorithm for reconstructing the irregular, chaotic flow dynamics around two side-by-side square cylinders from sparse, time-resolved, velocity measurements in the wake. We use Proper Orthogonal Decomposition (POD) to reduce the dimensionality of the problem and then explore two different reconstruction approaches: in the first approach, we use the subspace system identification algorithm n4sid to extract a linear dynamical model directly from the data (including the modelling and measurement error covariance matrices) and then employ Kalman filter theory to synthesize a linearly optimal estimator. In the second approach, the estimator matrices are directly identified using n4sid. A systematic study reveals that the first strategy outperforms the second in terms of reconstruction accuracy, robustness and computational efficiency. We also consider the problem of sensor placement. A greedy approach based on the QR pivoting algorithm is compared against sensors placed at the POD mode peaks; we show that the former approach is more accurate in recovering the flow characteristics away from the cylinders. We demonstrate that a linear dynamic model with a sufficiently large number of states and relatively few measurements, can recover accurately complex flow features, such as the interaction of the irregular flapping motion of the jet emanating from the gap with the vortices shed from the cylinders as well as the convoluted patterns downstream arising from the amalgamation of the individual wakes. The proposed methodology is entirely data-driven, does not have tunable parameters, and the resulting matrices are unique (to within a linear coordinate transformation of the state vector). The method can be applied directly to either experimental or computational data. △ Less

Submitted 7 September, 2022; originally announced September 2022.

Comments: 33 pages, 23 figures, 1 table

On the role of laminar/turbulent interface on energy transfer between scales in bypass transition

Authors: Hanxun Yao, George Papadakis

Abstract: We investigate the role of laminar/turbulent interface in the interscale energy transfer in a boundary layer undergoing bypass transition, with the aid of the Karman-Howarth-Monin-Hill (KHMH) equation. A local binary indicator function is used to detect the interface and employed subsequently to define two-point intermittencies. These are used to decompose the standard-averaged interscale and inte… ▽ More We investigate the role of laminar/turbulent interface in the interscale energy transfer in a boundary layer undergoing bypass transition, with the aid of the Karman-Howarth-Monin-Hill (KHMH) equation. A local binary indicator function is used to detect the interface and employed subsequently to define two-point intermittencies. These are used to decompose the standard-averaged interscale and interspace energy fluxes into conditionally-averaged components. We find that the inverse cascade in the streamwise direction reported in an earlier work arises due to events across the downstream or upstream interfaces (head or tail respectively) of a turbulent spot. However, the three-dimensional energy flux maps reveal significant differences between these two regions: in the downstream interface, inverse cascade is stronger and dominant over a larger range of streamwise and spanwise separations. We explain this finding by considering a propagating spot of simplified shape as it crosses a fixed streamwise location. We derive also the conditionally-averaged KHMH equation, thus generalising similar equations for single-point statistics to two-point statistics. We compare the three-dimensional maps of the conditionally-averaged production and total energy flux within turbulent spots against the maps of standard-averaged quantities within the fully turbulent region. The results indicate remarkable dynamical similarities between turbulent spots and the fully turbulent region for two-point statistics. This has been known only for single-point quantities, and we show here that the similarity extends to two-point quantities as well. △ Less

Submitted 26 July, 2022; originally announced July 2022.

Tight bounds and the role of optical loss in polariton-mediated near-field heat transfer

Authors: Mariano Pascale, Georgia T. Papadakis

Abstract: We introduce an analytical framework for near-field radiative heat transfer in bulk plasmonic and polar media. Considering material dispersion, we derive a closed-form expression for the radiative thermal conductance, which disentangles the role of optical loss from other material dispersion characteristics, such as the spectral width of the Reststrahlen band in polar dielectrics, as well as from… ▽ More We introduce an analytical framework for near-field radiative heat transfer in bulk plasmonic and polar media. Considering material dispersion, we derive a closed-form expression for the radiative thermal conductance, which disentangles the role of optical loss from other material dispersion characteristics, such as the spectral width of the Reststrahlen band in polar dielectrics, as well as from the temperature. We provide a universal condition for maximizing heat transfer that defines the optimal interplay between a material's optical loss and polariton resonance frequency, based on which we introduce tight bounds to near-field heat transfer. With this formalism, one can quantitatively evaluate all polaritonic materials in terms of their performance as near-field thermal emitters. △ Less

Submitted 6 March, 2023; v1 submitted 4 July, 2022; originally announced July 2022.

On the structure of Vorticity and Turbulence Fields in a separated flow around a finite wing; analysis using Direct Numerical Simulation

Authors: Juan Carlos Bilbao-Ludena, George Papadakis

Abstract: We investigate the spatial distributions and production mechanisms of vorticity and turbulent kinetic energy around a finite NACA 0018 wing with square wingtip profile at $Re_c=10^4$ and $10^{\circ}$ angle of attack with the aid of Direct Numerical Simulation (DNS). The analysis focuses on the highly inhomogeneous region around the tip and the near wake; this region is highly convoluted, strongly… ▽ More We investigate the spatial distributions and production mechanisms of vorticity and turbulent kinetic energy around a finite NACA 0018 wing with square wingtip profile at $Re_c=10^4$ and $10^{\circ}$ angle of attack with the aid of Direct Numerical Simulation (DNS). The analysis focuses on the highly inhomogeneous region around the tip and the near wake; this region is highly convoluted, strongly three-dimensional, and far from being self-similar. The flow separates close to the leading edge creating a large, open recirculation zone around the central part of the wing. In the proximity of the tip, the flow remains attached but another smaller recirculation zone forms closer to the trailing edge; this zone strongly affects the development of main wing tip vortex. The early formation mechanisms of three vortices close to the leading edge are elucidated and discussed. More specifically, we analyse the role of vortex stretching/compression and tilting, and how it affects the strength of each vortex as it approaches the trailing edge. We find that the three-dimensional flow separation at the sharp tip close to the leading edge plays an important role on the subsequent vortical flow development on the suction side. The production of turbulent kinetic energy and Reynolds stresses is also investigated and discussed in conjunction with the identified vortex patterns. The detailed analysis of the mechanisms that sustain vorticity and turbulent kinetic energy improves our understanding of these highly three dimensional, non-equilibrium flows and can lead to better actuation methods to manipulate these flows. △ Less

Submitted 17 May, 2022; originally announced May 2022.

Investigation of a submerged fully passive energy-extracting flapping foil operating in sheared inflow

Authors: Konstantinos Theodorakis, Dimitris Ntouras, George Papadakis

Abstract: In this work a fully passive energy harvesting foil is studied computationally. An in-house 2nd order finite volume CFD solver, MaPFlow, is strongly coupled with a rigid body dynamics solver to investigate the foil operation under uniform and sheared inflow conditions with/without free surface. The mesh follows the airfoil motion using a radial basis function (RBF) mesh deformation approach. Initi… ▽ More In this work a fully passive energy harvesting foil is studied computationally. An in-house 2nd order finite volume CFD solver, MaPFlow, is strongly coupled with a rigid body dynamics solver to investigate the foil operation under uniform and sheared inflow conditions with/without free surface. The mesh follows the airfoil motion using a radial basis function (RBF) mesh deformation approach. Initially, MaPFlow predictions are compared to experimental and numerical results available in the literature, where reasonable agreement is found. Next, one-phase simulations are considered for linearly sheared inflow for various shear rates. Results suggested that foil performance can be enhanced under sheared inflow conditions. Finally, two-phase simulations taking into account the free surface, for both uniform and sheared inflow, are considered. Predictions indicate a significant deterioration in performance of the system when the foil operates under the free surface due to the interaction of the shed vorticity with the free surface. △ Less

Submitted 7 July, 2022; v1 submitted 21 December, 2021; originally announced December 2021.

Comments: preprint submitted to Journal of Fluids & Structures

A hybrid Lagrangian -- Eulerian flow solver applied to elastically mounted cylinders in tandem arrangement

Authors: George Papadakis, Vasilis A. Riziotis, Spyros G. Voutsinas

Abstract: The fluid structure interaction of cylinders in tandem arrangement is used as validation basis of a multi-domain Lagrangian-Eulerian hybrid flow solver. In this hybrid combination, separate grids of limited width are defined around every solid body, on which the Eulerian flow equations are solved using finite volume approximations. In order to interconnect the domains defined by the grids, the ent… ▽ More The fluid structure interaction of cylinders in tandem arrangement is used as validation basis of a multi-domain Lagrangian-Eulerian hybrid flow solver. In this hybrid combination, separate grids of limited width are defined around every solid body, on which the Eulerian flow equations are solved using finite volume approximations. In order to interconnect the domains defined by the grids, the entire flow is described in Lagrangian coordinates and the corresponding equations are solved via particle approximations in fully coupled mode with the solutions within the Eulerian grids. The flow solver is also strongly (implicitly) coupled with the structural dynamic equations in case the cylinders are elastically supported. In the present work, the Eulerian part solves the compressible flow equations in density-velocity-pressure formulation and uses pre-conditioning at low Ma while the Lagrangian part is based on the density-dilatation-vorticity-pressure formulation. The hybrid solver is first validated in the case of an isolated rigid cylinder at $Re=100$. Then the case of a single elastically mounted cylinder at $Re=200$ is considered, followed by the case of two cylinders in tandem arrangement that are either rigid or elastically mounted. Good agreement with results produced with spectral and immersed boundary methods is found indicating the capabilities of the hybrid predictions. Also the flexibility of the method in handling complex multi-body fluid structure interaction problems is demonstrated by allowing grid-overlapping. △ Less

Submitted 7 July, 2022; v1 submitted 18 December, 2021; originally announced December 2021.

Comments: Submitted to Journal of Fluids and Stuctures

Thermodynamics of light management in near-field thermophotovoltaics

Authors: Georgia T. Papadakis, Meir Orenstein, Eli Yablonovitch, Shanhui Fan

Abstract: We evaluate near-field thermophotovoltaic (TPV) energy conversion systems focusing in particular on their open-circuit voltage (Voc). Unlike previous analyses based largely on numerical simulations with fluctuational electrodynamics, here, we develop an analytic model that captures the physics of near-field TPV systems and can predict their performance metrics. Using our model, we identify two imp… ▽ More We evaluate near-field thermophotovoltaic (TPV) energy conversion systems focusing in particular on their open-circuit voltage (Voc). Unlike previous analyses based largely on numerical simulations with fluctuational electrodynamics, here, we develop an analytic model that captures the physics of near-field TPV systems and can predict their performance metrics. Using our model, we identify two important opportunities of TPV systems operating in the near-field. First, we show analytically that enhancement of radiative recombination is a natural consequence of operating in the near-field. Second, we note that, owing to photon recycling and minimal radiation leakage in near-field operation, the PV cell used in near-field TPV systems can be much thinner compared to those used in solar PV systems. Since non-radiative recombination is a volumetric effect, use of a thinner cell reduces non-radiative losses per unit area. The combination of these two opportunities leads to increasingly large values of Voc as the TPV vacuum gap decreases. Hence, although operation in the near-field was previously perceived to be beneficial for electrical power density enhancement, here, we emphasize that thin-film near-field TPVs are also significantly advantageous in terms of Voc and consequently conversion efficiency as well as power density. We provide numerical results for an InAs-based thin-film TPV that exhibits efficiency > 50% at an emitter temperature as low as 1100 K. △ Less

Submitted 24 July, 2021; v1 submitted 22 July, 2021; originally announced July 2021.

Comments: 15 pages, 8 figures

Deep subwavelength thermal switch via resonant coupling in monolayer hexagonal boron nitride

Authors: Georgia T. Papadakis, Christopher J. Ciccarino, Lingling Fan, Meir Orenstein, Prineha Narang, Shanhui Fan

Abstract: Unlike the electrical conductance that can be widely modulated within the same material even in deep nanoscale devices, tuning the thermal conductance within a single material system or nanostructure is extremely challenging and requires a large-scale device. This prohibits the realization of robust ON/OFF states in switching the flow of thermal currents. Here, we present the theory of a thermal s… ▽ More Unlike the electrical conductance that can be widely modulated within the same material even in deep nanoscale devices, tuning the thermal conductance within a single material system or nanostructure is extremely challenging and requires a large-scale device. This prohibits the realization of robust ON/OFF states in switching the flow of thermal currents. Here, we present the theory of a thermal switch based on resonant coupling of three photonic resonators, in analogy to the field-effect electronic transistor composed of a source, gate, and drain. As a material platform, we capitalize on the extreme tunability and low-loss resonances observed in the dielectric function of monolayer hexagonal boron nitride (hBN) under controlled strain. We derive the dielectric function of hBN from first principles, including the phonon-polariton linewidths computed by considering phonon isotope and anharmonic phonon-phonon scattering. Subsequently, we propose a strain-controlled hBN-based thermal switch that modulates thermal conductance by more than an order of magnitude, corresponding to an ON/OFF contrast ratio of 98%, in a deep subwavelength nanostructure. △ Less

Submitted 2 November, 2020; originally announced November 2020.

Journal ref: Phys. Rev. Applied 15, 054002 (2021)

The role of Coherent Structures and Inhomogeneity in Near-Field Inter-Scale Turbulent Energy Transfers

Authors: F. Alves Portela, G. Papadakis, J. C. Vassilicos

Abstract: We use DNS to study inter-scale and inter-space energy exchanges in the near-field of a turbulent wake of a square prism in terms of the KHMH equation written for a triple decomposition of the velocity field accounting for the quasi-periodic vortex shedding. Orientation-averaged terms of the KHMH are computed on the plane of the mean flow and on the geometric centreline. We consider locations betw… ▽ More We use DNS to study inter-scale and inter-space energy exchanges in the near-field of a turbulent wake of a square prism in terms of the KHMH equation written for a triple decomposition of the velocity field accounting for the quasi-periodic vortex shedding. Orientation-averaged terms of the KHMH are computed on the plane of the mean flow and on the geometric centreline. We consider locations between $2$ and $8$ times the width $d$ of the prism. The mean flow produces kinetic energy which feeds the vortex shedding coherent structures. In turn, these structures transfer energy to the stochastic fluctuations over all length-scales $r$ from the Taylor length $λ$ to $d$ and dominate spatial turbulent transport of two-point stochastic turbulent fluctuations. The orientation-averaged non-linear inter-scale transfer rate $Π^{a}$ which was found to be approximately independent of $r$ by Alves Portela et. al. (2017) in the range $λ\le r \le 0.3d$ at a distance $x_{1}=2d$ from the square prism requires an inter-scale transfer contribution of coherent structures for this approximate constancy. However, the near-constancy of $Π^a$ at $x_1=8d$ which was also found by Alves Portela et. al. (2017) is mostly due to stochastic fluctuations. Even so, the proximity of $-Π^a$ to the turbulence dissipation rate $\varepsilon$ in the range $λ\le r\le d$ at $x_1=8d$ requires contributions of the coherent structures. Spatial inhomogeneity also makes a direct and distinct contribution to $Π^a$, and the constancy of $-Π^a/\varepsilon$ close to 1 would not have been possible without it either in this near-field flow. Finally, the pressure-velocity term is also an important contributor to the KHMH, particularly at scales r larger than about $0.4d$, and appears to correlate with the purely stochastic non-linear inter-scale transfer rate when the orientation average is lifted. △ Less

Submitted 22 April, 2020; originally announced April 2020.

Experimental Demonstration of Dynamic Thermal Regulation using Vanadium Dioxide Thin Films

Authors: Ahmed M. Morsy, Michael T. Barako, Vladan Jankovic, Virginia D. Wheeler, Mark W. Knight, Georgia T. Papadakis, Luke A. Sweatlock, Philip W. C. Hon, Michelle L. Povinelli

Abstract: We present an experimental demonstration of passive, dynamic thermal regulation in a solid-state system with temperature-dependent thermal emissivity switching. We achieve this effect using a multilayered device, comprised of a vanadium dioxide (VO2) thin film on a silicon substrate with a gold back reflector. We experimentally characterize the optical properties of the VO2 film and use the result… ▽ More We present an experimental demonstration of passive, dynamic thermal regulation in a solid-state system with temperature-dependent thermal emissivity switching. We achieve this effect using a multilayered device, comprised of a vanadium dioxide (VO2) thin film on a silicon substrate with a gold back reflector. We experimentally characterize the optical properties of the VO2 film and use the results to optimize device design. Using a calibrated, transient calorimetry experiment we directly measure the temperature fluctuations arising from a time-varying heat load. Under laboratory conditions, we find that the device regulates temperature better than a constant emissivity sample. We use the experimental results to validate our thermal model, which can be used to predict device performance under the conditions of outer space. In this limit, thermal fluctuations are halved with reference to a constant-emissivity sample. △ Less

Submitted 28 February, 2020; originally announced March 2020.

Nonreciprocal metamaterial obeying time-reversal symmetry

Authors: Siddharth Buddhiraju, Alex Song, Georgia T. Papadakis, Shanhui Fan

Abstract: We introduce a class of non-Hermitian systems that break electromagnetic reciprocity while preserving time-reversal symmetry, and describe its novel polarization dynamics. We show that this class of systems can be realized using van der Waals heterostructures involving transition-metal dichalcogenides (TMDs). Our work provides a path towards achieving strong optical nonreciprocity and polarization… ▽ More We introduce a class of non-Hermitian systems that break electromagnetic reciprocity while preserving time-reversal symmetry, and describe its novel polarization dynamics. We show that this class of systems can be realized using van der Waals heterostructures involving transition-metal dichalcogenides (TMDs). Our work provides a path towards achieving strong optical nonreciprocity and polarization-dependent directional amplification using compact, large-area and magnet-free structures. △ Less

Submitted 2 February, 2020; originally announced February 2020.

Journal ref: Phys. Rev. Lett. 124, 257403 (2020)

Nonreciprocal radiative heat transfer between two planar bodies

Authors: Lingling Fan, Yu Guo, Georgia T. Papadakis, Bo Zhao, Zhexin Zhao, Siddharth Buddhiraju, Meir Orenstein, Shanhui Fan

Abstract: We develop an analytical framework for nonreciprocal radiative heat transfer in two-body planar systems. Based on our formalism, we identify effects that are uniquely nonreciprocal in near-field heat transfer in planar systems. We further introduce a general thermodynamic constraint that is applicable for both reciprocal and nonreciprocal planar systems, in agreement with the second law of thermod… ▽ More We develop an analytical framework for nonreciprocal radiative heat transfer in two-body planar systems. Based on our formalism, we identify effects that are uniquely nonreciprocal in near-field heat transfer in planar systems. We further introduce a general thermodynamic constraint that is applicable for both reciprocal and nonreciprocal planar systems, in agreement with the second law of thermodynamics. We numerically demonstrate our findings in an example system consisting of magneto-optical materials. Our formalism applies to both near- and far-field regimes, opening opportunities for exploiting nonreciprocity in two-body radiative heat transfer systems. △ Less

Submitted 8 November, 2019; originally announced November 2019.

Comments: 9 pages, 4 figures. Initial announce: Oct. 20th, 2019

Journal ref: Phys. Rev. B 101, 085407 (2020)

Broadening near-field emission for performance enhancement in thermophotovoltaics

Authors: Georgia T. Papadakis, Siddharth Buddhiraju, Zhexin Zhao, Bo Zhao, Shanhui Fan

Abstract: The conventional notion for achieving high efficiency in thermophotovoltaics (TPVs) is to use a monochromatic emission at a photon energy corresponding to the band gap of the cell. Here, we prove theoretically that such a notion is only accurate under idealized conditions, and further show that when non-radiative recombination is taken into account, efficiency improvement can be achieved by broade… ▽ More The conventional notion for achieving high efficiency in thermophotovoltaics (TPVs) is to use a monochromatic emission at a photon energy corresponding to the band gap of the cell. Here, we prove theoretically that such a notion is only accurate under idealized conditions, and further show that when non-radiative recombination is taken into account, efficiency improvement can be achieved by broadening the emission spectrum, due to an enhancement in the open-circuit voltage. Broadening the emission spectrum also improves the electrical power density, by increasing the short-circuit current. To practically illustrate these findings, we focus on surface polariton-mediated near-field TPVs. We propose a versatile design strategy for broadening the emission spectrum via stacking of multiple plasmonic thin film layers. As an example, we consider a realistic ITO/InAs TPV, and predict a conversion efficiency of $50\%$ simultaneously with a power density of nearly $80$ W$/\mathrm{cm}^2$ at a $1300$ K emitter temperature. The performance of our proposed system far exceeds previous works in similar systems using a single plasmonic layer emitter. △ Less

Submitted 18 September, 2019; originally announced September 2019.

A data-based, reduced-order, dynamic estimator for reconstruction of non-linear flows exhibiting limit-cycle oscillations

Authors: Juan Guzmán-Iñigo, Markus Sodar, George Papadakis

Abstract: We apply a data-based, linear dynamic estimator to reconstruct the velocity field from measurements at a single sensor point in the wake of an aerofoil. In particular, we consider a NACA0012 airfoil at $Re=600$ and $16^°$ angle of attack. Under these conditions, the flow exhibits a vortex shedding limit cycle. A reduced order model (ROM) of the flow field is extracted using proper orthogonal decom… ▽ More We apply a data-based, linear dynamic estimator to reconstruct the velocity field from measurements at a single sensor point in the wake of an aerofoil. In particular, we consider a NACA0012 airfoil at $Re=600$ and $16^°$ angle of attack. Under these conditions, the flow exhibits a vortex shedding limit cycle. A reduced order model (ROM) of the flow field is extracted using proper orthogonal decomposition (POD). Subsequently, a subspace system identification algorithm (N4SID) is applied to extract directly the estimator matrices from the reduced output of the system (the POD coefficients). We explore systematically the effect of the number of states of the estimator, the sensor location, the type of sensor measurements (one or both velocity components), and the number of POD modes to be recovered. When the signal of a single velocity component (in the stream wise or cross stream directions) is measured, the reconstruction of the first two dominant POD modes strongly depends on the sensor location. We explore this behaviour and provide a physical explanation based on the non-linear mode interaction and the spatial distribution of the modes. When however, both components are measured, the performance is very robust, and is almost independent of the sensor location when the optimal number of estimator states is used. Reconstruction of the less energetic modes is more difficult, but still possible. △ Less

Submitted 25 July, 2019; originally announced July 2019.

Comments: 22 pages, 22 figures

Journal ref: Phys. Rev. Fluids 4, 114703 (2019)

Experimental demonstration of tunable graphene hyperbolic metamaterial

Authors: Jeremy Brouillet, Georgia T. Papadakis, Harry A. Atwater

Abstract: Tuning the macroscopic dielectric response on demand holds potential for actively tunable metaphotonics and optical devices. In recent years, graphene has been extensively investigated as a tunable element in nanophotonics. Significant theoretical work has been devoted on the tuning the hyperbolic properties of graphene/dielectric heterostructures, however, until now, such a motif has not been dem… ▽ More Tuning the macroscopic dielectric response on demand holds potential for actively tunable metaphotonics and optical devices. In recent years, graphene has been extensively investigated as a tunable element in nanophotonics. Significant theoretical work has been devoted on the tuning the hyperbolic properties of graphene/dielectric heterostructures, however, until now, such a motif has not been demonstrated experimentally. Here we focus on a graphene/polaritonic dielectric metamaterial, with strong optical resonances arising from the polar response of the dielectric, which are, in general, difficult to actively control. By controlling the doping level of graphene via external bias we experimentally demonstrate a wide range of tunability from a Fermi level of EF = 0 eV to EF = 0.5 eV, which yields an effective epsilon-near-zero crossing and tunable dielectric properties, verified through spectroscopic ellipsometry and transmission measurements. △ Less

Submitted 8 July, 2019; v1 submitted 25 June, 2019; originally announced June 2019.

Wave propagation in stenotic vessels; theoretical analysis and comparison between 3D and 1D fluid-structure-interaction models

Authors: George Papadakis, Jean Raspaud

Abstract: Using analytical expressions for the pressure and velocity waveforms in tapered vessels, we construct a linear 1D model for wave propagation in stenotic vessels in the frequency domain. We demonstrate that using only two parameters to approximate the exact geometry of the constriction (length and degree of stenosis), we can construct a model that can be solved analytically and can approximate with… ▽ More Using analytical expressions for the pressure and velocity waveforms in tapered vessels, we construct a linear 1D model for wave propagation in stenotic vessels in the frequency domain. We demonstrate that using only two parameters to approximate the exact geometry of the constriction (length and degree of stenosis), we can construct a model that can be solved analytically and can approximate with excellent accuracy the response of the original vessel for a wide range of physiologically relevant frequencies. We then proceed to compare the 1D results with full 3D FSI results from the literature for parameters corresponding to an idealized stenotic carotid artery. We find excellent matching with the volume flow rate over the cardiac cycle (less than $1\%$ error). Using results from DNS simulations to parametrize the velocity profile in the stenotic region, we manage to predict also the pressure distribution with small error (a few percentage points). The method proposed in the paper can be used to approximate vessels of arbitrary shape profile and can be extended to cover the whole cardiovascular tree. Recursive expressions make the solution very fast and open the possibility of carrying out sensitivity and uncertainty quantification studies that require thousands (or even millions) of simulations with minimal cost. △ Less

Submitted 10 May, 2019; originally announced May 2019.

Gate-tunable near-field heat transfer

Authors: Georgia T. Papadakis, Bo Zhao, Siddharth Buddhiraju, Shanhui Fan

Abstract: Active control over the flow of heat in the near-field holds promise for nanoscale thermal management, with applications in refrigeration, thermophotovoltaics, and thermal circuitry. Analogously to its electronic counterpart, the metal-oxide-semiconductor (MOS) capacitor, we propose a thermal switching mechanism based on accumulation and depletion of charge carriers in an ultra-thin plasmonic film… ▽ More Active control over the flow of heat in the near-field holds promise for nanoscale thermal management, with applications in refrigeration, thermophotovoltaics, and thermal circuitry. Analogously to its electronic counterpart, the metal-oxide-semiconductor (MOS) capacitor, we propose a thermal switching mechanism based on accumulation and depletion of charge carriers in an ultra-thin plasmonic film, via application of external bias. In our proposed configuration, the plasmonic film is placed on top of a polaritonic dielectric material that provides a surface phonon polariton (SPhP) thermal channel, while also ensuring electrical insulation for application of large electric fields. The variation of carrier density in the plasmonic film enables the control of the surface plasmon polariton (SPP) thermal channel. We show that the interaction of the SPP with the SPhP significantly enhances the net heat transfer. We study SiC as the oxide and explore three classes of gate-tunable plasmonic materials: transparent conductive oxides, doped semiconductors, and graphene, and theoretically predict contrast ratios as high as 225%. △ Less

Submitted 6 December, 2018; originally announced December 2018.

A Preconditioned Multiple Shooting Shadowing Algorithm for the Sensitivity Analysis of Chaotic Systems

Authors: Karim Shawki, George Papadakis

Abstract: We propose a preconditioner that can accelerate the rate of convergence of the Multiple Shooting Shadowing (MSS) method. This recently proposed method can be used to compute derivatives of time-averaged objectives (also known as sensitivities) to system parameter(s) for chaotic systems. We propose a block diagonal preconditioner, which is based on a partial singular value decomposition of the MSS… ▽ More We propose a preconditioner that can accelerate the rate of convergence of the Multiple Shooting Shadowing (MSS) method. This recently proposed method can be used to compute derivatives of time-averaged objectives (also known as sensitivities) to system parameter(s) for chaotic systems. We propose a block diagonal preconditioner, which is based on a partial singular value decomposition of the MSS constraint matrix. The preconditioner can be computed using matrix-vector products only (i.e. it is matrix-free) and is fully parallelised in the time domain. Two chaotic systems are considered, the Lorenz system and the 1D Kuramoto Sivashinsky equation. Combination of the preconditioner with a regularisation method leads to tight bracketing of the eigenvalues to a narrow range. This combination results in a significant reduction in the number of iterations, and renders the convergence rate almost independent of the number of degrees of freedom of the system, and the length of the trajectory that is used to compute the time-averaged objective. This can potentially allow the method to be used for large chaotic systems (such as turbulent flows) and optimal control applications. The singular value decomposition of the constraint matrix can also be used to quantify the effect of the system condition on the accuracy of the sensitivities. In fact, neglecting the singular modes affected by noise, we recover the correct values of sensitivity that match closely with those obtained with finite differences for the Kuramoto Sivashinsky equation in the light turbulent regime. △ Less

Submitted 24 October, 2018; originally announced October 2018.

Comments: 31 pages, 17 figures, 2 tables, submitted for review at Journal of Computational Physics

MSC Class: 76N25

Nonlinear optimal control of bypass transition using a receding horizon approach

Authors: Dandan Xiao, George Papadakis

Abstract: We consider the nonlinear optimal control of bypass transition in a boundary layer flow subjected to a pair of free stream vortical perturbations using a receding horizon approach. The optimal control problem is solved using the Lagrange variational technique that results in a set of adjoint equations, used to obtain the optimal wall actuation (blowing and suction from a control slot located in th… ▽ More We consider the nonlinear optimal control of bypass transition in a boundary layer flow subjected to a pair of free stream vortical perturbations using a receding horizon approach. The optimal control problem is solved using the Lagrange variational technique that results in a set of adjoint equations, used to obtain the optimal wall actuation (blowing and suction from a control slot located in the transition region). The receding horizon approach enables the application of control action over a longer time period, and allows the extraction of time-averaged statistics as well as investigation of the control effect downstream of the control slot. The results show that the controlled flow energy is initially reduced in the streamwise direction and then increased because transition still occurs. The distribution of the optimal control velocity responds to the flow activity above and upstream of the control slot. The control effect propagates downstream of the slot and the flow energy is reduced up to the exit of the computational domain. The mean drag reduction is 55% and 10% in the control region and downstream of the slot, respectively. The control mechanism is investigated by examining the second order statistics and the two-point correlations. It is found that in the upstream (left) side of the slot, the controller counteracts the near wall high speed streaks and reduces the turbulent shear stress; this is akin to opposition control in channel flow, and since the time-average control velocity is positive, it is more similar to blowing-only opposition control. In the downstream (right) side of the slot, the controller reacts to the impingement of turbulent spots that have been produced upstream and inside the boundary layer (top-bottom mechanism). The control velocity is positive and increases in the streamwise direction, and the flow behavior is similar to that of uniform blowing. △ Less

Submitted 22 September, 2018; originally announced September 2018.

Ultra-light Å-scale Optimal Optical Reflectors

Authors: Georgia T. Papadakis, Prineha Narang, Ravishankar Sundararaman, Nicholas Rivera, Hrvoje Buljan, Nader Engheta, Marin Soljacic

Abstract: High-reflectance in many state-of-the-art optical devices is achieved with noble metals. However, metals are limited by losses, and for certain applications, by their high mass density. Using a combination of ab initio and optical transfer matrix calculations, we evaluate the behavior of graphene-based Å-scale metamaterials and find that they could act as nearly-perfect reflectors in the mid-long… ▽ More High-reflectance in many state-of-the-art optical devices is achieved with noble metals. However, metals are limited by losses, and for certain applications, by their high mass density. Using a combination of ab initio and optical transfer matrix calculations, we evaluate the behavior of graphene-based Å-scale metamaterials and find that they could act as nearly-perfect reflectors in the mid-long wave infrared (IR) range. The low density of states for electron-phonon scattering and interband excitations leads to unprecedented optical properties for graphene heterostructures, especially alternating atomic layers of graphene and hexagonal boron nitride, at wavelengths greater than $10~μ$m. At these wavelengths, these materials exhibit reflectivities exceeding 99.7% at a fraction of the weight of noble metals, as well as plasmonic mode confinement and quality factors that are greater by an order of magnitude compared to noble metals. These findings hold promise for ultra-compact optical components and waveguides for mid-IR applications. Moreover, unlike metals, the photonic properties of these heterostructures could be actively tuned via chemical and/or electrostatic doping, providing exciting possibilities for tunable devices. △ Less

Submitted 20 July, 2017; originally announced July 2017.

Reduced energy consumption in stirred vessels by means of fractal impellers

Authors: Salur Basbug, George Papadakis, John Christos Vassilicos

Abstract: Earlier studies have shown that the power consumption of an unbaffled stirred vessel decreases significantly when the regular blades are replaced by fractal ones. In this paper, the physical explanation for this reduction is investigated using Direct Numerical Simulations at Re=1600. The gaps around the fractal blade perimeter create jets that penetrate inside the recirculation zone in the wake an… ▽ More Earlier studies have shown that the power consumption of an unbaffled stirred vessel decreases significantly when the regular blades are replaced by fractal ones. In this paper, the physical explanation for this reduction is investigated using Direct Numerical Simulations at Re=1600. The gaps around the fractal blade perimeter create jets that penetrate inside the recirculation zone in the wake and break up the trailing vortices into smaller ones. This affects the time-average recirculation pattern on the suction side. The volume of the separation region is 7% smaller in the wake of the fractal blades. The lower torque of the fractal impeller is equivalent to a decreased transport of angular momentum; this difference stems from the reduced turbulent transport induced by the smaller trailing vortices. The major difference in the turbulent dissipation is seen in the vicinity of trailing vortices, due to fluctuations of velocity gradients at relatively low frequencies. △ Less

Submitted 6 July, 2017; originally announced July 2017.

Comments: 37 pages, 20 figures

Optical Magnetism in Planar Metamaterial Heterostructures

Authors: Georgia T. Papadakis, Dagny Fleischman, Artur Davoyan, Pochi Yeh, Harry A. Atwater

Abstract: Harnessing artificial optical magnetism requires rather complex two- and three-dimensional structures, examples include split-ring and fishnet metamaterials and nanoparticles with non-trivial magnetic properties. By contrast, dielectric properties can be tailored even in planar and pattern-free, one-dimensional (1D) arrangements, for example metal/dielectric multilayer metamaterials. These systems… ▽ More Harnessing artificial optical magnetism requires rather complex two- and three-dimensional structures, examples include split-ring and fishnet metamaterials and nanoparticles with non-trivial magnetic properties. By contrast, dielectric properties can be tailored even in planar and pattern-free, one-dimensional (1D) arrangements, for example metal/dielectric multilayer metamaterials. These systems are extensively investigated due to their hyperbolic and plasmonic response, which, however, is considered to be limited to TM polarization, based on the general consensus that they do not possess interesting magnetic properties. In this work, we tackle these two seemingly unrelated issues simultaneously, by proposing conceptually and demonstrating experimentally a mechanism for artificial magnetism in planar, 1D metamaterials. We show experimentally that the magnetic response of metal/high-index dielectric hyperbolic metamaterials can be anisotropic, leading to frequency regimes of magnetic hyperbolic dispersion. We investigate the implications of our results for TE polarization and show that such systems can support TE interface-bound states, analogous to their TM counterparts, surface plasmon polaritons. Our results simplify the structural complexity for tailoring artificial magnetism in lithography-free systems and generalize the concept of plasmonic and hyperbolic properties to encompass both TE and TM polarizations at optical frequencies. △ Less

Submitted 5 May, 2017; v1 submitted 9 August, 2016; originally announced August 2016.

Comments: 9 pages, 6 figures

Field-effect induced tunability in planar hyperbolic metamaterials

Authors: Georgia T. Papadakis, Harry A. Atwater

Abstract: We demonstrate that use of the field effect to tune the effective optical parameters of a layered hyperbolic metamaterial leads to topological transitions in its dispersion characteristics in the optical regime. Field effect gating electrically modulates the permittivity in transparent conductive oxides via changes in the carrier density. These permittivity changes lead to active extreme modulatio… ▽ More We demonstrate that use of the field effect to tune the effective optical parameters of a layered hyperbolic metamaterial leads to topological transitions in its dispersion characteristics in the optical regime. Field effect gating electrically modulates the permittivity in transparent conductive oxides via changes in the carrier density. These permittivity changes lead to active extreme modulation of ~200% of the effective electromagnetic parameters along with active control of the anisotropic dispersion surface of hyperbolic metamaterials and enable the opening and closing of photonic band gaps. △ Less

Submitted 23 July, 2015; originally announced July 2015.

Journal ref: Phys. Rev. B 92, 184101 (2015)