-
Nanophotonic waveguide chip-to-free-space beam scanning at 68 Million Spots/(s$\cdot$mm$^{2}$)
Authors:
Matt Saha,
Y. Henry Wen,
Andrew S. Greenspon,
Matthew Zimmermann,
Kevin J. Palm,
Alex Witte,
Yin Min Goh,
Chao Li,
Mark Dong,
Andrew J. Leenheer,
Genevieve Clark,
Gerald Gilbert,
Matt Eichenfield,
Dirk Englund
Abstract:
A seamless chip-to-world photonic interface enables wide-ranging advancements in optical ranging, display, communication, computation, imaging, and light-matter interaction. An optimal solution allows for 2D scanning of a diffraction-limited beam from anywhere on a photonic chip over a large number of beam-spots in free-space. Currently, devices with direct PIC integration rely on tiled apertures…
▽ More
A seamless chip-to-world photonic interface enables wide-ranging advancements in optical ranging, display, communication, computation, imaging, and light-matter interaction. An optimal solution allows for 2D scanning of a diffraction-limited beam from anywhere on a photonic chip over a large number of beam-spots in free-space. Currently, devices with direct PIC integration rely on tiled apertures with poor mode qualities, large footprints, and complex control systems. Micro-mechanical beam scanners have good beam quality but lack direct PIC integration and are inertially-limited due to the use of bulk optical components or structures in which the optical aperture and actuator sizes are inextricably linked, resulting in trade-offs among resolution, speed, and footprint. Here, we overcome these limitations with the photonic "ski-jump": a nanoscale optical waveguide monolithically integrated atop a piezoelectrically actuated cantilever which passively curls ~90$^{\circ}$ out-of-plane in a footprint of <0.1 mm$^{2}$, emits sub-micron diffraction-limited optical modes, and exhibits kHz-rate mechanical resonances with quality factors exceeding 10,000. This enables two-dimensional beam-scanning with footprint-adjusted spot-rates of 68.6 mega-spots/(s$\cdot$mm$^{2}$) at CMOS-level voltages, which is equivalent to a 1 megapixel display at 100 Hz from a 1.5 mm$^{2}$ footprint, and exceeds the performance of state-of-the-art MEMS mirrors by >50$\times$. Using this device, we demonstrate image projection, video projection, and the initialization and readout of single photons from silicon vacancy centers in diamond waveguides. Based on current performance, we identify pathways for achieving >1 giga-spots at kHz-rates in a ~1 cm$^{2}$ area to provide a seamless, scalable optical pipeline between integrated photonic processors and the free-space world.
△ Less
Submitted 1 May, 2025; v1 submitted 25 June, 2024;
originally announced June 2024.
-
Synchronous micromechanically resonant programmable photonic circuits
Authors:
Mark Dong,
Julia M. Boyle,
Kevin J. Palm,
Matthew Zimmermann,
Alex Witte,
Andrew J. Leenheer,
Daniel Dominguez,
Gerald Gilbert,
Matt Eichenfield,
Dirk Englund
Abstract:
Programmable photonic integrated circuits (PICs) are emerging as powerful tools for the precise manipulation of light, with applications in quantum information processing, optical range finding, and artificial intelligence. The leading architecture for programmable PICs is the mesh of Mach-Zehnder interferometers (MZIs) embedded with reconfigurable optical phase shifters. Low-power implementations…
▽ More
Programmable photonic integrated circuits (PICs) are emerging as powerful tools for the precise manipulation of light, with applications in quantum information processing, optical range finding, and artificial intelligence. The leading architecture for programmable PICs is the mesh of Mach-Zehnder interferometers (MZIs) embedded with reconfigurable optical phase shifters. Low-power implementations of these PICs involve micromechanical structures driven capacitively or piezoelectrically but are limited in modulation bandwidth by mechanical resonances and high operating voltages. However, circuits designed to operate exclusively at these mechanical resonances would reduce the necessary driving voltage from resonantly enhanced modulation as well as maintaining high actuation speeds. Here we introduce a synchronous, micromechanically resonant design architecture for programmable PICs, which exploits micromechanical eigenmodes for modulation enhancement. This approach combines high-frequency mechanical resonances and optically broadband phase shifters to increase the modulation response on the order of the mechanical quality factor $Q_m$, thereby reducing the PIC's power consumption, voltage-loss product, and footprint. The architecture is useful for broadly applicable circuits such as optical phased arrays, $1$ x $N$, and $N$ x $N$ photonic switches. We report a proof-of-principle programmable 1 x 8 switch with piezoelectric phase shifters at specifically targeted mechanical eigenfrequencies, showing a full switching cycle of all eight channels spaced by approximately 11 ns and operating at >3x average modulation enhancement across all on-chip modulators. By further leveraging micromechanical devices with high $Q_m$, which can exceed 1 million, our design architecture should enable a new class of low-voltage and high-speed programmable PICs.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
Programmable photonic integrated meshes for modular generation of optical entanglement links
Authors:
Mark Dong,
Matthew Zimmermann,
David Heim,
Hyeongrak Choi,
Genevieve Clark,
Andrew J. Leenheer,
Kevin J. Palm,
Alex Witte,
Daniel Dominguez,
Gerald Gilbert,
Matt Eichenfield,
Dirk Englund
Abstract:
Large-scale generation of quantum entanglement between individually controllable qubits is at the core of quantum computing, communications, and sensing. Modular architectures of remotely-connected quantum technologies have been proposed for a variety of physical qubits, with demonstrations reported in atomic and all-photonic systems. However, an open challenge in these architectures lies in const…
▽ More
Large-scale generation of quantum entanglement between individually controllable qubits is at the core of quantum computing, communications, and sensing. Modular architectures of remotely-connected quantum technologies have been proposed for a variety of physical qubits, with demonstrations reported in atomic and all-photonic systems. However, an open challenge in these architectures lies in constructing high-speed and high-fidelity reconfigurable photonic networks for optically-heralded entanglement among target qubits. Here we introduce a programmable photonic integrated circuit (PIC), realized in a piezo-actuated silicon nitride (SiN)-in-oxide CMOS-compatible process, that implements an N x N Mach-Zehnder mesh (MZM) capable of high-speed execution of linear optical transformations. The visible-spectrum photonic integrated mesh is programmed to generate optical connectivity on up to N = 8 inputs for a range of optically-heralded entanglement protocols. In particular, we experimentally demonstrated optical connections between 16 independent pairwise mode couplings through the MZM, with optical transformation fidelities averaging 0.991 +/- 0.0063. The PIC's reconfigurable optical connectivity suffices for the production of 8-qubit resource states as building blocks of larger topological cluster states for quantum computing. Our programmable PIC platform enables the fast and scalable optical switching technology necessary for network-based quantum information processors.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
Control of hot-carrier relaxation time in Au-Ag thin films through alloying
Authors:
Sarvenaz Memarzadeh,
Kevin J. Palm,
Thomas E. Murphy,
Marina S. Leite,
Jeremy N. Munday
Abstract:
The plasmon resonance of a structure is primarily dictated by its optical properties and geometry, which can be modified to enable hot-carrier photodetectors with superior performance. Recently, metal-alloys have played a prominent role in tuning the resonance of plasmonic structures through chemical composition engineering. However, it has been unclear how alloying modifies the time dynamics of g…
▽ More
The plasmon resonance of a structure is primarily dictated by its optical properties and geometry, which can be modified to enable hot-carrier photodetectors with superior performance. Recently, metal-alloys have played a prominent role in tuning the resonance of plasmonic structures through chemical composition engineering. However, it has been unclear how alloying modifies the time dynamics of generated hot-carriers. In this work, we elucidate the role of chemical composition on the relaxation time of hot-carriers for the archetypal Aux Ag1-x thin-film system. Through time-resolved optical spectroscopy measurements in the visible wavelength range, we measure composition-dependent relaxation times that vary up to 8x for constant pump fluency. Surprisingly, we find that the addition of 2% of Ag into Au films can increase the hot carrier lifetime by approximately 35% under fixed fluence, as a result of a decrease in optical loss. Further, the relaxation time is found to be inversely proportional to the imaginary part of the permittivity. Our results indicate that alloying is a promising approach to effectively control hot-carrier relaxation time in metals.
△ Less
Submitted 30 July, 2020;
originally announced July 2020.
