Showing 1–7 of 7 results for author: Pagnoux, D

Spatiotemporal Characterization of Supercontinuum Extending from the Visible to the Mid-Infrared in Multimode Graded-Index Optical Fiber

Authors: K. Krupa, C. Louot, V. Couderc, M. Fabert, R. Guenard, B. M. Shalaby, A. Tonello, A. Barthélémy, D. Pagnoux, P. Leproux, A. Bendahmane, R. Dupiol, G. Millot, S. Wabnitz

Abstract: We experimentally demonstrate that pumping a graded-index multimode fiber with sub-ns pulses from a microchip Nd:YAG laser leads to spectrally flat supercontinuum generation with a uniform bell-shaped spatial beam profile extending from the visible to the mid-infrared at 2500\,nm. We study the development of the supercontinuum along the multimode fiber by the cut-back method, which permits us to a… ▽ More We experimentally demonstrate that pumping a graded-index multimode fiber with sub-ns pulses from a microchip Nd:YAG laser leads to spectrally flat supercontinuum generation with a uniform bell-shaped spatial beam profile extending from the visible to the mid-infrared at 2500\,nm. We study the development of the supercontinuum along the multimode fiber by the cut-back method, which permits us to analyze the competition between the Kerr-induced geometric parametric instability and stimulated Raman scattering. We also performed a spectrally resolved temporal analysis of the supercontinuum emission. △ Less

Submitted 22 July, 2016; originally announced July 2016.

Comments: 5 pages 7 figures

Coherent combining in an Yb doped double core fiber laser

Authors: Johan Boullet, David Sabourdy, Agnès Desfarges-Berthelemot, Vincent Kermène, Dominique Pagnoux, Philippe Roy, Bernard Dussardier, Wilfried Blanc

Abstract: Coherent combining is demonstrated in a clad pumped Yb doped double core fiber laser. A slope efficiency of more than 70 % is achieved with 96 % of the total output power on the fundamental mode of one of the two cores. This high combining efficiency is obtained when both cores are coupled via a biconical fused taper in a Michelson interferometer configuration. Coherent combining is demonstrated in a clad pumped Yb doped double core fiber laser. A slope efficiency of more than 70 % is achieved with 96 % of the total output power on the fundamental mode of one of the two cores. This high combining efficiency is obtained when both cores are coupled via a biconical fused taper in a Michelson interferometer configuration. △ Less

Submitted 15 September, 2012; originally announced September 2012.

Journal ref: Optics Letters 30, 15 (2005) pp. 1962-1964

Experimental and numerical analysis of the chromatic dispersion dependence upon the actual profile of small core microstructured fibres

Authors: Laurent Labonté, Philippe Roy, Dominique Pagnoux, Frédéric Louradour, Christine Restoin, Gilles Mélin, Ekatarina Burov

Abstract: The chromatic dispersion curve of the fundamental mode in small core microstructured fibres (SCMF) is both calculated using a Finite Element Method (FEM) and measured with a low coherence interferometric method. The great sensitivity of the chromatic dispersion to variations of the geometrical parameters of SCMFs (the pitch and the diameter) is pointed out. An excellent agreement is obtained betwe… ▽ More The chromatic dispersion curve of the fundamental mode in small core microstructured fibres (SCMF) is both calculated using a Finite Element Method (FEM) and measured with a low coherence interferometric method. The great sensitivity of the chromatic dispersion to variations of the geometrical parameters of SCMFs (the pitch and the diameter) is pointed out. An excellent agreement is obtained between the numerical and the experimental results over a half micrometer spectral bandwidth [1.1 $μ$m-1.6 $μ$m]. △ Less

Submitted 28 April, 2010; originally announced April 2010.

Journal ref: Journal of Optics A Pure and Applied Optics 8, 11 (2006) 933-938

Numerical and experimental analysis of the birefringence of large air fraction slightly unsymmetrical holey fibres

Authors: Laurent Labonté, Dominique Pagnoux, Philippe Roy, Bahloul Faouzi, Zghal Mourad

Abstract: Careful numerical computations show that very slight geometrical imperfections of the cross-section of actual large air-fraction holey fibres (d/Λ > 0.6) may induce surprisingly high birefringence, corresponding to beat lengths as short as few millimeters. The spectral variations of this birefringence obeys laws similar to those of elliptical core Hi-Bi holey fibres with low air-fraction. For all… ▽ More Careful numerical computations show that very slight geometrical imperfections of the cross-section of actual large air-fraction holey fibres (d/Λ > 0.6) may induce surprisingly high birefringence, corresponding to beat lengths as short as few millimeters. The spectral variations of this birefringence obeys laws similar to those of elliptical core Hi-Bi holey fibres with low air-fraction. For all the tested fibres, the group birefringence numerically deduced from the only shape birefringence is in good agreement with the measured one that does not varies when strongly heating the fibres. These computations and measurements show that the contribution of possible inner stress to the birefringence is negligible. △ Less

Submitted 26 April, 2010; originally announced April 2010.

Journal ref: Optics Communications 262 (2010) 180-187

Microstructured air-silica fibres: Recent developments in modelling, manufacturing and experiment

Authors: Dominique Pagnoux, Ambre Peyrilloux, Philippe Roy, Sébastien Février, Laurent Labonté, Stéphane Hilaire

Abstract: The main modelling methods devoted to microstrutured air-silica optical fibres (MOFs) are presented and discussed. Then, the specific propagation properties of MOFs are studied in detail. Characteristics measured on fibres manufactured in our laboratory or reported in the literature are analysed. A large number of potential and demonstrated applications are presented and the obtained performances… ▽ More The main modelling methods devoted to microstrutured air-silica optical fibres (MOFs) are presented and discussed. Then, the specific propagation properties of MOFs are studied in detail. Characteristics measured on fibres manufactured in our laboratory or reported in the literature are analysed. A large number of potential and demonstrated applications are presented and the obtained performances are discussed. A particular attention is given to hollow- core photonic bandgap fibres and their applications. △ Less

Submitted 26 March, 2010; originally announced March 2010.

Comments: 37 pages

Journal ref: Annales des telecommunications-annals of telecommunications 58, 9-10 (2003) Vol. 58 n°9-10, September-October 2003

Passive Temperature-Compensating Technique for Microstructured Fiber Bragg Gratings

Authors: Minh Châu Phan Huy, Guillaume Laffont, Véronique Dewynter, Pierre Ferdinand, Dominique Pagnoux, Bernard Dussardier, Wilfried Blanc

Abstract: The thermal drift of the characteristic wavelength of fiber Bragg gratings (FBGs) photowritten in the core of microstructured fibers (MOFs) is significantly reduced by inserting a liquid of suitable refractive index into their holes. For instance, the spectral range of variations is divided by a factor of 4 over a temperature range larger than 20\degree C in a six-hole MOF, and the maximum sensi… ▽ More The thermal drift of the characteristic wavelength of fiber Bragg gratings (FBGs) photowritten in the core of microstructured fibers (MOFs) is significantly reduced by inserting a liquid of suitable refractive index into their holes. For instance, the spectral range of variations is divided by a factor of 4 over a temperature range larger than 20\degree C in a six-hole MOF, and the maximum sensitivity is reduced. Such passive FBG temperature compensation technique is of great interest for applications involving accurate sensing free of thermal effects. △ Less

Submitted 28 February, 2010; originally announced March 2010.

Journal ref: IEEE Sensors Journal 8, 7 (2008) 1073-1078

Accurate measurement of the cutoff wavelength in a microstructured optical fiber by means of an azimutal filtering technique

Authors: Laurent Labonte, Dominique Pagnoux, Philippe Roy, Faouzi Balhoul, Mourad Zghal, Gilles Melin, Ekaterina Burov, Gilles Renversez

Abstract: A simple self-referenced non destructive method is proposed for measuring the cutoff wavelength of microstructured optical fibers (MOFs). It is based on the analysis of the time dependent optical power transmitted through a bow-tie slit rotating in the far-field pattern of the fiber under test. As a first demonstration, the cutoff wavelength of a 2m MOF sample is measured with a precision of 10n… ▽ More A simple self-referenced non destructive method is proposed for measuring the cutoff wavelength of microstructured optical fibers (MOFs). It is based on the analysis of the time dependent optical power transmitted through a bow-tie slit rotating in the far-field pattern of the fiber under test. As a first demonstration, the cutoff wavelength of a 2m MOF sample is measured with a precision of 10nm, in good agreement with theoretical predictions. △ Less

Submitted 25 February, 2010; originally announced February 2010.

Comments: 12 pages