Exploring Scintillators and Cherenkov Radiators for MIP Timing Detectors
Authors:
R. Cala',
L. Martinazzoli,
N. Kratochwil,
I. Frank,
M. Salomoni,
F. Pagano,
G. Terragni,
C. Lowis,
J. Chen,
J. Pejchal,
P. Bohacek,
M. Nikl,
S. Tkachenko,
O. Sidlestkiy,
M. Paganoni,
M. Pizzichemi,
E. Auffray
Abstract:
This article presents the timing performance of materials with fast light emission, tested as Minimum Ionizing Particle detectors using 150 GeV hadron beams in Monte Carlo simulations and at the CERN SPS North Area. Pixels of cross-section 2 x 2 mm2 or 3 x 3 mm2 and length of 3 or 10 mm were coupled to Hamamatsu SiPM and read out by fast high-frequency electronics. Materials whose timing performan…
▽ More
This article presents the timing performance of materials with fast light emission, tested as Minimum Ionizing Particle detectors using 150 GeV hadron beams in Monte Carlo simulations and at the CERN SPS North Area. Pixels of cross-section 2 x 2 mm2 or 3 x 3 mm2 and length of 3 or 10 mm were coupled to Hamamatsu SiPM and read out by fast high-frequency electronics. Materials whose timing performance relies on Cherenkov emission, namely BGSO, PWO, and PbF2, achieved time resolutions in the range 24-36ps. Scintillators as L(Y)SO:Ce, GAGG, and BaF2 reached below 15 ps, the best topping at 12.1 +/- 0.4 ps. These fast materials are compared to LYSO and their additional benefit is discussed. Given the promising results of BaF2, the study is completed with measurements of the scintillation properties of a set doped with yttrium to quench the slow light emission.
△ Less
Submitted 20 January, 2025; v1 submitted 11 November, 2024;
originally announced November 2024.
Fast emitting nanocomposites for high-resolution ToF-PET imaging based on multicomponent scintillators
Authors:
Matteo Orfano,
Fiammetta Pagano,
Ilaria Mattei,
Francesca Cova,
Valeria Secchi,
Silvia Bracco,
Edith Rogers,
Luca Barbieri,
Roberto Lorenzi,
Gregory Bizarri,
Etiennette Auffray,
Angelo Monguzzi
Abstract:
Time-of-Flight Positron Emission Tomography is a medical imaging technique, based on the detection of two back-to-back γ-photons generated from radiotracers injected in the body. Its limit is the ability of employed scintillation detectors to discriminate in time the arrival of γ-pairs, i.e. the coincidence time resolution (CTR). A CTR < 50 ps that would enable fast imaging with ultralow radiotrac…
▽ More
Time-of-Flight Positron Emission Tomography is a medical imaging technique, based on the detection of two back-to-back γ-photons generated from radiotracers injected in the body. Its limit is the ability of employed scintillation detectors to discriminate in time the arrival of γ-pairs, i.e. the coincidence time resolution (CTR). A CTR < 50 ps that would enable fast imaging with ultralow radiotracer dose. Monolithic materials do not have simultaneously the required high light output and fast emission characteristics, thus the concept of scintillating heterostructure is proposed, where the device is made of a dense scintillator coupled to a fast-emitting light material. Here we present a composite polymeric scintillator, whose density has been increased upon addition of hafnium oxide nanoparticles. This enhanced by +300% its scintillation yield, surpassing commercial plastic scintillators. The nanocomposite is coupled to bismuth germanate oxide (BGO) realizing a multilayer scintillator. We observed the energy sharing between its components, which activate the nanocomposite fast emission enabling a net CTR improvement of 25% with respect to monolithic BGO. These results demonstrate that a controlled loading with dense nanomaterials is an excellent strategy to enhance the performance of polymeric scintillators for their use in advanced radiation detection and imaging technologies.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
