-
Development of a High-Resolution, High-Dynamic-Range Charge Detector for Ion Beam Monitoring
Authors:
O. Adriani,
E. Berti,
P. Betti,
J. Casaus,
R. DAlessandro,
S. Detti,
C. Diaz,
J. Marin,
G. Martinez,
N. Mori,
L. Pacini,
C. Pizzolotto,
A. Tiberio,
M. Scaringella,
O. Starodubtsev,
G. Zampa,
N. Zampa
Abstract:
We present an innovative charge detector with high resolution and wide dynamic range designed to fulfill the requirements of a monitoring system for a high energy ion beam. The detector prototype, constructed using Si photodiodes and a custom readout electronics, underwent extensive testing during HERD and AMS beam tests at CERN SPS facilities. Initial testing showcased the detector's exceptional…
▽ More
We present an innovative charge detector with high resolution and wide dynamic range designed to fulfill the requirements of a monitoring system for a high energy ion beam. The detector prototype, constructed using Si photodiodes and a custom readout electronics, underwent extensive testing during HERD and AMS beam tests at CERN SPS facilities. Initial testing showcased the detector's exceptional performance, emphasizing both high resolution and a dynamic range capable of measuring nuclei with atomic numbers ranging from 1 to 80. The prototype's compatibility with fast, quasi real-time data analysis qualifies it as an ideal candidate for online applications. This article presents the results from the testing phase of the prototype, highlighting its capabilities and performance. Ongoing detector development, potential applications, and future developments aimed at enhancing the detector's functionality and versatility are also discussed.
△ Less
Submitted 18 December, 2024;
originally announced December 2024.
-
Performance assessment of the HERD calorimeter with a photo-diode read-out system for high-energy electron beams
Authors:
O. Adriani,
G. Ambrosi,
M. Antonelli,
Y. Bai,
X. Bai,
T. Bao,
M. Barbanera,
E. Berti,
P. Betti,
G. Bigongiari,
M. Bongi,
V. Bonvicini,
S. Bottai,
I. Cagnoli,
W. Cao,
J. Casaus,
D. Cerasole,
Z. Chen,
X. Cui,
R. D'Alessandro,
L. Di Venere,
C. Diaz,
Y. Dong,
S. Detti,
M. Duranti
, et al. (41 additional authors not shown)
Abstract:
The measurement of cosmic rays at energies exceeding 100 TeV per nucleon is crucial for enhancing the understanding of high-energy particle propagation and acceleration models in the Galaxy. HERD is a space-borne calorimetric experiment that aims to extend the current direct measurements of cosmic rays to unexplored energies. The payload is scheduled to be installed on the Chinese Space Station in…
▽ More
The measurement of cosmic rays at energies exceeding 100 TeV per nucleon is crucial for enhancing the understanding of high-energy particle propagation and acceleration models in the Galaxy. HERD is a space-borne calorimetric experiment that aims to extend the current direct measurements of cosmic rays to unexplored energies. The payload is scheduled to be installed on the Chinese Space Station in 2027. The primary peculiarity of the instrument is its capability to measure particles coming from all directions, with the main detector being a deep, homogeneous, 3D calorimeter. The active elements are read out using two independent systems: one based on wavelength shifter fibers coupled to CMOS cameras, and the other based on photo-diodes read-out with custom front-end electronics. A large calorimeter prototype was tested in 2023 during an extensive beam test campaign at CERN. In this paper, the performance of the calorimeter for high-energy electron beams, as obtained from the photo-diode system data, is presented. The prototype demonstrated excellent performance, e.g., an energy resolution better than 1% for electrons at 250 GeV. A comparison between beam test data and Monte Carlo simulation data is also presented.
△ Less
Submitted 4 October, 2024;
originally announced October 2024.
-
Development of the photo-diode subsystem for the HERD calorimeter double-readout
Authors:
O. Adriani,
M. Antonelli,
A. Basti,
E. Berti,
P. Betti,
G. Bigongiari,
L. Bonechi,
M. Bongi,
V. Bonvicini,
S. Bottai,
P. Brogi,
G. Castellini,
C. Checchia,
J. Casaus,
X. Cui,
Y. Dong,
R. D'Alessandro,
S. Detti,
F. Giovacchini,
N. Finetti,
P. Maestro,
P. S. Marrocchesi,
X. Liu,
J. Marin,
G. Martinez
, et al. (18 additional authors not shown)
Abstract:
The measurement of cosmic-ray individual spectra provides unique information regarding the origin and propagation of astro-particles. Due to the limited acceptance of current space experiments, protons and nuclei around the "knee" region ($\sim1\ PeV$) can only be observed by ground based experiments. Thanks to an innovative design, the High Energy cosmic-Radiation Detection (HERD) facility will a…
▽ More
The measurement of cosmic-ray individual spectra provides unique information regarding the origin and propagation of astro-particles. Due to the limited acceptance of current space experiments, protons and nuclei around the "knee" region ($\sim1\ PeV$) can only be observed by ground based experiments. Thanks to an innovative design, the High Energy cosmic-Radiation Detection (HERD) facility will allow direct observation up to this energy region: the instrument is mainly based on a 3D segmented, isotropic and homogeneous calorimeter which properly measures the energy of particles coming from each direction and it will be made of about 7500 LYSO cubic crystals. The read-out of the scintillation light is done with two independent systems: the first one based on wave-length shifting fibers coupled to Intensified scientific CMOS cameras, the second one is made of two photo-diodes with different active areas connected to a custom front-end electronics. This photo-diode system is designed to achieve a huge dynamic range, larger than $10^7$, while having a small power consumption, few mW per channel. Thanks to a good signal-to-noise ratio, the capability of a proper calibration, by using signals of both non-interacting and showering particles, is also guaranteed. In this paper, the current design and the performance obtained by several tests of the photo-diode read-out system are discussed.
△ Less
Submitted 8 August, 2022;
originally announced August 2022.
-
The CaloCube calorimeter for high-energy cosmic-ray measurements in space: performance of a large-scale prototype
Authors:
O. Adriani,
A. Agnesi,
S. Albergo,
M. Antonelli,
L. Auditore,
A. Basti,
E. Berti,
G. Bigongiari,
L. Bonechi,
M. Bongi,
V. Bonvicini,
S. Bottai,
P. Brogi,
G. Castellini,
P. W. Cattaneo,
C. Checchia,
R. D Alessandro,
S. Detti,
M. Fasoli,
N. Finetti,
A. Italiano,
P. Maestro,
P. S. Marrocchesi,
N. Mori,
G. Orzan
, et al. (23 additional authors not shown)
Abstract:
The direct observation of high-energy cosmic rays, up to the PeV energy region, will increasingly rely on highly performing calorimeters, and the physics performance will be primarily determined by their geometrical acceptance and energy resolution. Thus, it is extremely important to optimize their geometrical design, granularity and absorption depth, with respect to the totalmass of the apparatus…
▽ More
The direct observation of high-energy cosmic rays, up to the PeV energy region, will increasingly rely on highly performing calorimeters, and the physics performance will be primarily determined by their geometrical acceptance and energy resolution. Thus, it is extremely important to optimize their geometrical design, granularity and absorption depth, with respect to the totalmass of the apparatus, which is amongst the most important constraints for a space mission. CaloCube is an homogeneous calorimeter whose basic geometry is cubic and isotropic, obtained by filling the cubic volume with small cubic scintillating crystals. In this way it is possible to detect particles arriving from every direction in space, thus maximizing the acceptance. This design summarizes a three-year R&D activity, aiming to both optimize and study the full-scale performance of the calorimeter, in the perspective of a cosmic-ray space mission, and investigate a viable technical design by means of the construction of several sizable prototypes. A large scale prototype, made of a mesh of 5x5x18 CsI(Tl) crystals, has been constructed and tested on high-energy particle beams at CERN SPS accelerator. In this paper we describe the CaloCube design and present the results relative to the response of the large scale prototype to electrons.
△ Less
Submitted 4 October, 2021;
originally announced October 2021.
-
Tracker-In-Calorimeter (TIC): a calorimetric approach to tracking gamma rays in space experiments
Authors:
O. Adriani,
G. Ambrosi,
P. Azzarello,
A. Basti,
E. Berti,
B. Bertucci,
G. Bigongiari,
L. Bonechi,
M. Bongi,
S. Bottai,
M. Brianzi,
P. Brogi,
G. Castellini,
E. Catanzani,
C. Checchia,
R. D'Alessandro,
S. Detti,
M. Duranti,
N. Finetti,
V. Formato,
M. Ionica,
P. Maestro,
F. Maletta,
P. S. Marrocchesi,
N. Mori
, et al. (11 additional authors not shown)
Abstract:
A multi-messenger, space-based cosmic ray detector for gamma rays and charged particles poses several design challenges due to the different instrumental requirements for the two kind of particles. Gamma-ray detection requires layers of high Z materials for photon conversion and a tracking device with a long lever arm to achieve the necessary angular resolution to separate point sources; on the co…
▽ More
A multi-messenger, space-based cosmic ray detector for gamma rays and charged particles poses several design challenges due to the different instrumental requirements for the two kind of particles. Gamma-ray detection requires layers of high Z materials for photon conversion and a tracking device with a long lever arm to achieve the necessary angular resolution to separate point sources; on the contrary, charge measurements for atomic nuclei requires a thin detector in order to avoid unwanted fragmentation, and a shallow instrument so to maximize the geometric factor. In this paper, a novel tracking approach for gamma rays which tries to reconcile these two conflicting requirements is presented. The proposal is based on the Tracker-In-Calorimeter (TIC) design that relies on a highly-segmented calorimeter to track the incident gamma ray by sampling the lateral development of the electromagnetic shower at different depths. The effectiveness of this approach has been studied with Monte Carlo simulations and has been validated with test beam data of a detector prototype.
△ Less
Submitted 22 October, 2020; v1 submitted 4 August, 2020;
originally announced August 2020.
-
On-orbit Operations and Offline Data Processing of CALET onboard the ISS
Authors:
Y. Asaoka,
S. Ozawa,
S. Torii,
O. Adriani,
Y. Akaike,
K. Asano,
M. G. Bagliesi,
G. Bigongiari,
W. R. Binns,
S. Bonechi,
M. Bongi,
P. Brogi,
J. H. Buckley,
N. Cannady,
G. Castellini,
C. Checchia,
M. L. Cherry,
G. Collazuol,
V. Di Felice,
K. Ebisawa,
H. Fuke,
T. G. Guzik,
T. Hams,
M. Hareyama,
N. Hasebe
, et al. (67 additional authors not shown)
Abstract:
The CALorimetric Electron Telescope (CALET), launched for installation on the International Space Station (ISS) in August, 2015, has been accumulating scientific data since October, 2015. CALET is intended to perform long-duration observations of high-energy cosmic rays onboard the ISS. CALET directly measures the cosmic-ray electron spectrum in the energy range of 1 GeV to 20 TeV with a 2% energy…
▽ More
The CALorimetric Electron Telescope (CALET), launched for installation on the International Space Station (ISS) in August, 2015, has been accumulating scientific data since October, 2015. CALET is intended to perform long-duration observations of high-energy cosmic rays onboard the ISS. CALET directly measures the cosmic-ray electron spectrum in the energy range of 1 GeV to 20 TeV with a 2% energy resolution above 30 GeV. In addition, the instrument can measure the spectrum of gamma rays well into the TeV range, and the spectra of protons and nuclei up to a PeV.
In order to operate the CALET onboard ISS, JAXA Ground Support Equipment (JAXA-GSE) and the Waseda CALET Operations Center (WCOC) have been established. Scientific operations using CALET are planned at WCOC, taking into account orbital variations of geomagnetic rigidity cutoff. Scheduled command sequences are used to control the CALET observation modes on orbit. Calibration data acquisition by, for example, recording pedestal and penetrating particle events, a low-energy electron trigger mode operating at high geomagnetic latitude, a low-energy gamma-ray trigger mode operating at low geomagnetic latitude, and an ultra heavy trigger mode, are scheduled around the ISS orbit while maintaining maximum exposure to high-energy electrons and other high-energy shower events by always having the high-energy trigger mode active. The WCOC also prepares and distributes CALET flight data to collaborators in Italy and the United States.
As of August 31, 2017, the total observation time is 689 days with a live time fraction of the total time of approximately 84%. Nearly 450 million events are collected with a high-energy (E>10 GeV) trigger. By combining all operation modes with the excellent-quality on-orbit data collected thus far, it is expected that a five-year observation period will provide a wealth of new and interesting results.
△ Less
Submitted 15 March, 2018;
originally announced March 2018.
-
CaloCube: a novel calorimeter for high-energy cosmic rays in space
Authors:
P. W. Cattaneo,
O. Adriani,
S. Albergo,
L. Auditore,
A. Basti,
E. Berti,
G. Bigongiari,
L. Bonechi,
S. Bonechi,
M. Bongi,
V. Bonvicini,
S. Bottai,
P. Brogi,
G. Carotenuto,
G. Castellini,
R. ďAlessandro,
S. Detti,
M. Fasoli,
N. Finetti,
A. Italiano,
P. Lenzi,
P. Maestro,
P. S. Marrocchesi,
N. Mori,
M. Olmi
, et al. (21 additional authors not shown)
Abstract:
In order to extend the direct observation of high-energy cosmic rays up to the PeV region, highly performing calorimeters with large geometrical acceptance and high energy resolution are required. Within the constraint of the total mass of the apparatus, crucial for a space mission, the calorimeters must be optimized with respect to their geometrical acceptance, granularity and absorption depth. C…
▽ More
In order to extend the direct observation of high-energy cosmic rays up to the PeV region, highly performing calorimeters with large geometrical acceptance and high energy resolution are required. Within the constraint of the total mass of the apparatus, crucial for a space mission, the calorimeters must be optimized with respect to their geometrical acceptance, granularity and absorption depth. CaloCube is a homogeneous calorimeter with cubic geometry, to maximise the acceptance being sensitive to particles from every direction in space; granularity is obtained by relying on small cubic scintillating crystals as active elements. Different scintillating materials have been studied. The crystal sizes and spacing among them have been optimized with respect to the energy resolution. A prototype, based on CsI(Tl) cubic crystals, has been constructed and tested with particle beams. Some results of tests with different beams at CERN are presented.
△ Less
Submitted 23 May, 2017; v1 submitted 19 May, 2017;
originally announced May 2017.
