-
Femtosecond temperature measurements of laser-shocked copper deduced from the intensity of the x-ray thermal diffuse scattering
Authors:
J. S. Wark,
D. J. Peake,
T. Stevens,
P. G. Heighway,
Y. Ping,
P. Sterne,
B. Albertazzi,
S. J. Ali,
L. Antonelli,
M. R. Armstrong,
C. Baehtz,
O. B. Ball,
S. Banerjee,
A. B. Belonoshko,
C. A. Bolme,
V. Bouffetier,
R. Briggs,
K. Buakor,
T. Butcher,
S. Di Dio Cafiso,
V. Cerantola,
J. Chantel,
A. Di Cicco,
A. L. Coleman,
J. Collier
, et al. (100 additional authors not shown)
Abstract:
We present 50-fs, single-shot measurements of the x-ray thermal diffuse scattering (TDS) from copper foils that have been shocked via nanosecond laser-ablation up to pressures above 135~GPa. We hence deduce the x-ray Debye-Waller (DW) factor, providing a temperature measurement. The targets were laser-shocked with the DiPOLE 100-X laser at the High Energy Density (HED) endstation of the European X…
▽ More
We present 50-fs, single-shot measurements of the x-ray thermal diffuse scattering (TDS) from copper foils that have been shocked via nanosecond laser-ablation up to pressures above 135~GPa. We hence deduce the x-ray Debye-Waller (DW) factor, providing a temperature measurement. The targets were laser-shocked with the DiPOLE 100-X laser at the High Energy Density (HED) endstation of the European X-ray Free-Electron Laser (EuXFEL). Single x-ray pulses, with a photon energy of 18 keV, were scattered from the samples and recorded on Varex detectors. Despite the targets being highly textured (as evinced by large variations in the elastic scattering), and with such texture changing upon compression, the absolute intensity of the azimuthally averaged inelastic TDS between the Bragg peaks is largely insensitive to these changes, and, allowing for both Compton scattering and the low-level scattering from a sacrificial ablator layer, provides a reliable measurement of $T/Θ_D^2$, where $Θ_D$ is the Debye temperature. We compare our results with the predictions of the SESAME 3336 and LEOS 290 equations of state for copper, and find good agreement within experimental errors. We thus demonstrate that single-shot temperature measurements of dynamically compressed materials can be made via thermal diffuse scattering of XFEL radation.
△ Less
Submitted 6 January, 2025;
originally announced January 2025.
-
Formation of high-aspect-ratio nanocavity in LiF crystal using a femtosecond of x-ray FEL pulse
Authors:
Sergey S. Makarov,
Sergey A. Grigoryev,
Vasily V. Zhakhovsky,
Petr Chuprov,
Tatiana A. Pikuz,
Nail A. Inogamov,
Victor V. Khokhlov,
Yuri V. Petrov,
Eugene Perov,
Vadim Shepelev,
Takehisa Shobu,
Aki Tominaga,
Ludovic Rapp,
Andrei V. Rode,
Saulius Juodkazis,
Mikako Makita,
Motoaki Nakatsutsumi,
Thomas R. Preston,
Karen Appel,
Zuzana Konopkova,
Valerio Cerantola,
Erik Brambrink,
Jan-Patrick Schwinkendorf,
István Mohacsi,
Vojtech Vozda
, et al. (8 additional authors not shown)
Abstract:
Sub-picosecond optical laser processing of metals is actively utilized for modification of a heated surface layer. But for deeper modification of different materials a laser in the hard x-ray range is required. Here, we demonstrate that a single 9-keV x-ray pulse from a free-electron laser can form a um-diameter cylindrical cavity with length of ~1 mm in LiF surrounded by shock-transformed materia…
▽ More
Sub-picosecond optical laser processing of metals is actively utilized for modification of a heated surface layer. But for deeper modification of different materials a laser in the hard x-ray range is required. Here, we demonstrate that a single 9-keV x-ray pulse from a free-electron laser can form a um-diameter cylindrical cavity with length of ~1 mm in LiF surrounded by shock-transformed material. The plasma-generated shock wave with TPa-level pressure results in damage, melting and polymorphic transformations of any material, including transparent and non-transparent to conventional optical lasers. Moreover, cylindrical shocks can be utilized to obtain a considerable amount of exotic high-pressure polymorphs. Pressure wave propagation in LiF, radial material flow, formation of cracks and voids are analyzed via continuum and atomistic simulations revealing a sequence of processes leading to the final structure with the long cavity. Similar results can be produced with semiconductors and ceramics, which opens a new pathway for development of laser material processing with hard x-ray pulses.
△ Less
Submitted 5 September, 2024;
originally announced September 2024.
-
Structural aging of human neurons is the opposite of the changes in schizophrenia
Authors:
Ryuta Mizutani,
Rino Saiga,
Yoshiro Yamamoto,
Masayuki Uesugi,
Akihisa Takeuchi,
Kentaro Uesugi,
Yasuko Terada,
Yoshio Suzuki,
Vincent De Andrade,
Francesco De Carlo,
Susumu Takekoshi,
Chie Inomoto,
Naoya Nakamura,
Youta Torii,
Itaru Kushima,
Shuji Iritani,
Norio Ozaki,
Kenichi Oshima,
Masanari Itokawa,
Makoto Arai
Abstract:
Human mentality develops with age and is altered in psychiatric disorders, though their underlying mechanism is unknown. In this study, we analyzed nanometer-scale three-dimensional structures of brain tissues of the anterior cingulate cortex from eight schizophrenia and eight control cases. The distribution profiles of neurite curvature of the control cases showed a trend depending on their age,…
▽ More
Human mentality develops with age and is altered in psychiatric disorders, though their underlying mechanism is unknown. In this study, we analyzed nanometer-scale three-dimensional structures of brain tissues of the anterior cingulate cortex from eight schizophrenia and eight control cases. The distribution profiles of neurite curvature of the control cases showed a trend depending on their age, resulting in an age-correlated decrease in the standard deviation of neurite curvature (Pearson's r = -0.80, p = 0.018). In contrast to the control cases, the schizophrenia cases deviate upward from this correlation, exhibiting a 60% higher neurite curvature compared with the controls (p = 7.8 x 10^(-4)). The neurite curvature also showed a correlation with a hallucination score (Pearson's r = 0.80, p = 1.8 x 10^(-4)), indicating that neurite structure is relevant to brain function. We suggest that neurite curvature plays a pivotal role in brain aging and can be used as a hallmark to exploit a novel treatment of schizophrenia. This nano-CT paper is the result of our decade-long analysis and is unprecedented in terms of number of cases.
△ Less
Submitted 13 November, 2022;
originally announced November 2022.
-
High-power laser experiment on developing supercritical shock propagating in homogeneously magnetized plasma of ambient gas origin
Authors:
S. Matsukiyo,
R. Yamazaki,
T. Morita,
K. Tomita,
Y. Kuramitsu,
S. J. Tanaka,
T. Takezaki,
S. Isayama,
T. Higuchi,
H. Murakami,
Y. Horie,
N. Katsuki,
R. Hatsuyama,
M. Edamoto,
H. Nishioka,
M. Takagi,
T. Kojima,
S. Tomita,
N. Ishizaka,
S. Kakuchi,
S. Sei,
K. Sugiyama,
K. Aihara,
S. Kambayashi,
M. Ota
, et al. (8 additional authors not shown)
Abstract:
A developing supercritical collisionless shock propagating in a homogeneously magnetized plasma of ambient gas origin having higher uniformity than the previous experiments is formed by using high-power laser experiment. The ambient plasma is not contaminated by the plasma produced in the early time after the laser shot. While the observed developing shock does not have stationary downstream struc…
▽ More
A developing supercritical collisionless shock propagating in a homogeneously magnetized plasma of ambient gas origin having higher uniformity than the previous experiments is formed by using high-power laser experiment. The ambient plasma is not contaminated by the plasma produced in the early time after the laser shot. While the observed developing shock does not have stationary downstream structure, it possesses some characteristics of a magnetized supercritical shock, which are supported by a one-dimensional full particle-in-cell simulation taking the effect of finite time of laser-target interaction into account.
△ Less
Submitted 25 July, 2022;
originally announced July 2022.
-
Direct imaging of shock wave splitting in diamond at Mbar pressures
Authors:
S. S. Makarov,
S. A. Dyachkov,
T. A. Pikuz,
K. Katagiri,
V. V. Zhakhovsky,
N. A. Inogamov,
V. A. Khokhlov,
A. S. Martynenko,
B. Albertazzi,
G. Rigon,
P. Mabey,
N. Hartley,
Y. Inubushi,
K. Miyanishi,
K. Sueda,
T. Togashi,
M. Yabashi,
T. Yabuuchi,
R. Kodama,
S. A. Pikuz,
M. Koenig,
N. Ozaki
Abstract:
The propagation of a shock wave in solids can stress them to ultra-high pressures of millions of atmospheres. Understanding the behavior of matter at these extreme pressures is essential to describe a wide range of physical phenomena, including the formation of planets, young stars and cores of super-Earths, as well as the behavior of advanced ceramic materials subjected to such stresses. Under me…
▽ More
The propagation of a shock wave in solids can stress them to ultra-high pressures of millions of atmospheres. Understanding the behavior of matter at these extreme pressures is essential to describe a wide range of physical phenomena, including the formation of planets, young stars and cores of super-Earths, as well as the behavior of advanced ceramic materials subjected to such stresses. Under megabar (Mbar) pressure, even a solid with high strength exhibits plastic properties, causing the shock wave to split in two. This phenomenon is described by theoretical models, but without direct experimental measurements to confirm them, their validity is still in doubt. Here, we present the results of an experiment in which the evolution of the coupled elastic-plastic wave structure in diamond was directly observed and studied with submicron spatial resolution, using the unique capabilities of the X-ray free-electron laser. The direct measurements allowed, for the first time, the fitting and validation of a strength model for diamond in the range of several Mbar by performing continuum mechanics simulations in 2D geometry. The presented experimental approach to the study of shock waves in solids opens up new possibilities for the direct verification and construction of the equations of state of matter in the ultra-high pressure range, which are relevant for the solution of a variety of problems in high energy density physics.
△ Less
Submitted 4 July, 2022;
originally announced July 2022.
-
High-power laser experiment forming a supercritical collisionless shock in a magnetized uniform plasma at rest
Authors:
Ryo Yamazaki,
S. Matsukiyo,
T. Morita,
S. J. Tanaka,
T. Umeda,
K. Aihara,
M. Edamoto,
S. Egashira,
R. Hatsuyama,
T. Higuchi,
T. Hihara,
Y. Horie,
M. Hoshino,
A. Ishii,
N. Ishizaka,
Y. Itadani,
T. Izumi,
S. Kambayashi,
S. Kakuchi,
N. Katsuki,
R. Kawamura,
Y. Kawamura,
S. Kisaka,
T. Kojima,
A. Konuma
, et al. (29 additional authors not shown)
Abstract:
We present a new experimental method to generate quasi-perpendicular supercritical magnetized collisionless shocks. In our experiment, ambient nitrogen (N) plasma is at rest and well-magnetized, and it has uniform mass density. The plasma is pushed by laser-driven ablation aluminum (Al) plasma. Streaked optical pyrometry and spatially resolved laser collective Thomson scattering clarify structures…
▽ More
We present a new experimental method to generate quasi-perpendicular supercritical magnetized collisionless shocks. In our experiment, ambient nitrogen (N) plasma is at rest and well-magnetized, and it has uniform mass density. The plasma is pushed by laser-driven ablation aluminum (Al) plasma. Streaked optical pyrometry and spatially resolved laser collective Thomson scattering clarify structures of plasma density and temperatures, which are compared with one-dimensional particle-in-cell simulations. It is indicated that just after the laser irradiation, the Al plasma is magnetized by a self-generated Biermann battery field, and the plasma slaps the incident N plasma. The compressed external field in the N plasma reflects N ions, leading to counter-streaming magnetized N flows. Namely we identify the edge of the reflected N ions. Such interacting plasmas form a magnetized collisionless shock.
△ Less
Submitted 7 February, 2022; v1 submitted 19 January, 2022;
originally announced January 2022.
-
Using Diffuse Scattering to Observe X-Ray-Driven Nonthermal Melting
Authors:
N. J. Hartley,
J. Grenzer,
L. Huang,
Y. Inubushi,
N. Kamimura,
K. Katagiri,
R. Kodama,
A. Kon,
W. Lu,
M. Makita,
T. Matsuoka,
S. Nakajima,
N. Ozaki,
T. Pikuz,
A. Rode,
D. Sagae,
A. K. Schuster,
K. Tono,
K. Voigt,
J. Vorberger,
T. Yabuuchi,
E. E. McBride,
D. Kraus
Abstract:
We present results from the SPring-8 Angstrom Compact free electron LAser (SACLA) XFEL facility, using a high intensity ($\sim\!10^{20}\,$W/cm$^2$) X-ray pump X-ray probe scheme to observe changes in the ionic structure of silicon induced by X-ray heating of the electrons. By avoiding Laue spots in the scattering signal from a single crystalline sample, we observe a rapid rise in diffuse scatterin…
▽ More
We present results from the SPring-8 Angstrom Compact free electron LAser (SACLA) XFEL facility, using a high intensity ($\sim\!10^{20}\,$W/cm$^2$) X-ray pump X-ray probe scheme to observe changes in the ionic structure of silicon induced by X-ray heating of the electrons. By avoiding Laue spots in the scattering signal from a single crystalline sample, we observe a rapid rise in diffuse scattering, which we attribute to a loss of lattice order and a transition to a liquid state within 100 fs of irradiation, a timescale which agrees well with first principles simulations, but is faster than that predicted by purely inertial behavior. This method is capable of observing liquid scattering without masking or filtering of signal from the ambient solid, allowing the liquid structure to be measured throughout and beyond the phase change.
△ Less
Submitted 31 March, 2022; v1 submitted 29 July, 2020;
originally announced July 2020.
-
Structural diverseness of neurons between brain areas and between cases
Authors:
Ryuta Mizutani,
Rino Saiga,
Yoshiro Yamamoto,
Masayuki Uesugi,
Akihisa Takeuchi,
Kentaro Uesugi,
Yasuko Terada,
Yoshio Suzuki,
Vincent De Andrade,
Francesco De Carlo,
Susumu Takekoshi,
Chie Inomoto,
Naoya Nakamura,
Youta Torii,
Itaru Kushima,
Shuji Iritani,
Norio Ozaki,
Kenichi Oshima,
Masanari Itokawa,
Makoto Arai
Abstract:
The cerebral cortex is composed of multiple cortical areas that exert a wide variety of brain functions. Although human brain neurons are genetically and areally mosaic, the three-dimensional structural differences between neurons in different brain areas or between the neurons of different individuals have not been delineated. Here, we report a nanometer-scale geometric analysis of brain tissues…
▽ More
The cerebral cortex is composed of multiple cortical areas that exert a wide variety of brain functions. Although human brain neurons are genetically and areally mosaic, the three-dimensional structural differences between neurons in different brain areas or between the neurons of different individuals have not been delineated. Here, we report a nanometer-scale geometric analysis of brain tissues of the superior temporal gyrus of 4 schizophrenia and 4 control cases by using synchrotron radiation nanotomography. The results of the analysis and a comparison with results for the anterior cingulate cortex indicated that 1) neuron structures are dissimilar between brain areas and that 2) the dissimilarity varies from case to case. The structural diverseness was mainly observed in terms of the neurite curvature that inversely correlates with the diameters of the neurites and spines. The analysis also revealed the geometric differences between the neurons of the schizophrenia and control cases, suggesting that neuron structure is associated with brain function. The area dependency of the neuron structure and its diverseness between individuals should represent the individuality of brain functions.
△ Less
Submitted 30 June, 2020;
originally announced July 2020.
-
All femtosecond optical pump and X-ray probe: holey-axicon for free electron laser
Authors:
V. Anand,
J. Maksimovic,
T. Katkus,
S. H. Ng,
O. Ulcinas,
M. Mikutis,
J. Baltrukonis,
A. Urbas,
G. Slekys,
H. Ogura,
D. Sagae,
T. Pikuz,
T. Somekawa,
N. Ozaki,
A. Vailionis,
G. Seniutinas,
V. Mizeikis,
K. Glazebrook,
J. P. Brodie,
P. R. Stoddart,
L. Rapp,
A. V. Rode,
E. G. Gamaly,
S. Juodkazis
Abstract:
We put forward a co-axial pump(optical)-probe(X-rays) experimental concept and show performance of the optical component. A Bessel beam generator with a central 100 micrometers-diameter hole (on the optical axis) was fabricated using femtosecond (fs) laser structuring inside a silica plate. This flat-axicon optical element produces a needle-like axial intensity distribution which can be used for t…
▽ More
We put forward a co-axial pump(optical)-probe(X-rays) experimental concept and show performance of the optical component. A Bessel beam generator with a central 100 micrometers-diameter hole (on the optical axis) was fabricated using femtosecond (fs) laser structuring inside a silica plate. This flat-axicon optical element produces a needle-like axial intensity distribution which can be used for the optical pump pulse. The fs-X-ray free electron laser (X-FEL) beam of sub-1 micrometer diameter can be introduced through the central hole along the optical axis onto a target as a probe. Different realisations of optical pump are discussed. Such optical elements facilitate alignment of ultra-short fs-pulses in space and time and can be used in light-matter interaction experiments at extreme energy densities on the surface and in the volume of targets. Full advantage of ultra-short 10 fs X-FEL probe pulses with fs-pump(optical) opens an unexplored temporal dimension of phase transitions and the fastest laser-induced rates of material heating and quenching. A wider field of applications of fs-laser-enabled structuring of materials and design of specific optical elements for astrophotonics is presented.
△ Less
Submitted 24 May, 2020;
originally announced May 2020.
-
Three-dimensional alteration of neurites in schizophrenia
Authors:
Ryuta Mizutani,
Rino Saiga,
Akihisa Takeuchi,
Kentaro Uesugi,
Yasuko Terada,
Yoshio Suzuki,
Vincent De Andrade,
Francesco De Carlo,
Susumu Takekoshi,
Chie Inomoto,
Naoya Nakamura,
Itaru Kushima,
Shuji Iritani,
Norio Ozaki,
Soichiro Ide,
Kazutaka Ikeda,
Kenichi Oshima,
Masanari Itokawa,
Makoto Arai
Abstract:
This paper reports nano-CT analysis of brain tissues of schizophrenia and control cases. The analysis revealed that: (1) neuronal structures vary between individuals, (2) the mean curvature of distal neurites of the schizophrenia cases was 1.5 times higher than that of the controls, and (3) dendritic spines were categorized into two geometrically distinctive groups, though no structural difference…
▽ More
This paper reports nano-CT analysis of brain tissues of schizophrenia and control cases. The analysis revealed that: (1) neuronal structures vary between individuals, (2) the mean curvature of distal neurites of the schizophrenia cases was 1.5 times higher than that of the controls, and (3) dendritic spines were categorized into two geometrically distinctive groups, though no structural differences were observed between the disease and control cases. The differences in the neurite curvature result in differences in the spatial trajectory and hence alter neuronal circuits. We suggest that the structural alteration of neurons in the schizophrenia cases should reflect psychiatric symptoms of schizophrenia.
△ Less
Submitted 16 February, 2019; v1 submitted 2 April, 2018;
originally announced April 2018.
-
Decaying shock studies of phase transitions in MgOSiO2 systems: implications for the Super-Earths interiors
Authors:
R. M. Bolis,
G. Morard,
T. Vinci,
A. Ravasio,
E. Bambrink,
M. Guarguaglini,
M. Koenig,
R. Musella,
F. Remus,
J. Bouchet,
N. Ozaki,
K. Miyanishi,
T. Sekine,
Y. Sakawa,
T. Sano,
R. Kodama,
F. Guyot,
A. Benuzzi-Mounaix
Abstract:
We report an experimental study of the phase diagrams of periclase (MgO), enstatite (MgSiO3) and forsterite (Mg2SiO4) at high pressures. We investigated with laser driven decaying shocks the pressure/temperature curves of MgO, MgSiO3 and Mg2SiO4 between 0.2-1.2 TPa, 0.12-0.5 TPa and 0.2-0.85 TPa respectively. A melting signature has been observed in MgO at 0.47 TPa and 9860 K, while no phase chang…
▽ More
We report an experimental study of the phase diagrams of periclase (MgO), enstatite (MgSiO3) and forsterite (Mg2SiO4) at high pressures. We investigated with laser driven decaying shocks the pressure/temperature curves of MgO, MgSiO3 and Mg2SiO4 between 0.2-1.2 TPa, 0.12-0.5 TPa and 0.2-0.85 TPa respectively. A melting signature has been observed in MgO at 0.47 TPa and 9860 K, while no phase changes were observed neither in MgSiO3 nor in Mg2SiO4. An increasing of reflectivity of MgO, MgSiO3 and Mg2SiO4 liquids have been detected at 0.55 TPa -12 760 K, 0.15 TPa - 7540 K, 0.2 TPa - 5800 K, respectively. In contrast to SiO2, melting and metallization of these compounds do not coincide implying the presence of poor electrically conducting liquids close to the melting lines. This has important implications for the generation of dynamos in Super-earths mantles.
△ Less
Submitted 6 April, 2016;
originally announced April 2016.
-
GTOC8: Results and Methods of ESA Advanced Concepts Team and JAXA-ISAS
Authors:
Dario Izzo,
Daniel Hennes,
Marcus Märtens,
Ingmar Getzner,
Krzysztof Nowak,
Anna Heffernan,
Stefano Campagnola,
Chit Hong Yam,
Naoya Ozaki,
Yoshihide Sugimoto
Abstract:
We consider the interplanetary trajectory design problem posed by the 8th edition of the Global Trajectory Optimization Competition and present the end-to-end strategy developed by the team ACT-ISAS (a collaboration between the European Space Agency's Advanced Concepts Team and JAXA's Institute of Space and Astronautical Science). The resulting interplanetary trajectory won 1st place in the compet…
▽ More
We consider the interplanetary trajectory design problem posed by the 8th edition of the Global Trajectory Optimization Competition and present the end-to-end strategy developed by the team ACT-ISAS (a collaboration between the European Space Agency's Advanced Concepts Team and JAXA's Institute of Space and Astronautical Science). The resulting interplanetary trajectory won 1st place in the competition, achieving a final mission value of $J=146.33$ [Mkm]. Several new algorithms were developed in this context but have an interest that go beyond the particular problem considered, thus, they are discussed in some detail. These include the Moon-targeting technique, allowing one to target a Moon encounter from a low Earth orbit; the 1-$k$ and 2-$k$ fly-by targeting techniques, enabling one to design resonant fly-bys while ensuring a targeted future formation plane% is acquired at some point after the manoeuvre ; the distributed low-thrust targeting technique, admitting one to control the spacecraft formation plane at 1,000,000 [km]; and the low-thrust optimization technique, permitting one to enforce the formation plane's orientations as path constraints.
△ Less
Submitted 3 February, 2016; v1 submitted 2 February, 2016;
originally announced February 2016.
-
Melting of iron close to Earth's inner core boundary conditions and beyond
Authors:
M. Harmand,
A. Ravasio,
S. Mazevet,
J. Bouchet,
A. Denoeud,
F. Dorchies,
Y. Feng,
C. Fourment,
E . Galtier,
J. Gaudin,
F. Guyot,
R. Kodama,
M. Koenig,
H. J. Lee,
K. Miyanishi,
G. Morard,
R. Musella,
B. Nagler,
M. Nakatsutsumi,
N. Ozaki,
V. Recoules,
S. Toleikis,
T. Vinci,
U. Zastrau,
D. Zhu
, et al. (1 additional authors not shown)
Abstract:
Several important geophysical features such as heat flux at the Core-Mantle Boundary or geodynamo production are intimately related with the temperature profile in the Earth's core. However, measuring the melting curve of iron at conditions corresponding to the Earth inner core boundary under pressure of 330 GPa has eluded scientists for several decades. Significant discrepancies in previously rep…
▽ More
Several important geophysical features such as heat flux at the Core-Mantle Boundary or geodynamo production are intimately related with the temperature profile in the Earth's core. However, measuring the melting curve of iron at conditions corresponding to the Earth inner core boundary under pressure of 330 GPa has eluded scientists for several decades. Significant discrepancies in previously reported iron melting temperatures at high pressure have called into question the validity of dynamic measurements. We report measurements made with a novel approach using X-ray absorption spectroscopy using an X-ray free electron laser source coupled to a laser shock experiment. We determine the state of iron along the shock Hugoniot up to 420 GPa (+/- 50) and 10800 K (+/- 1390) and find an upper boundary for the melting curve of iron by detecting solid iron at 130 GPa and molten at 260, 380 and 420 GPa along the shock Hugoniot. Our result establishes unambiguous agreement between dynamic measurement and recent extrapolations from static data thus resolving the long-standing controversy over the reliability of using dynamic compression to study the melting of iron at conditions close to the Earth's inner core boundary and beyond.
△ Less
Submitted 7 November, 2014;
originally announced November 2014.
