-
Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
A. Abada
, et al. (1439 additional authors not shown)
Abstract:
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;…
▽ More
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase.
FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible.
FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes.
This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
P. Azzi
, et al. (1439 additional authors not shown)
Abstract:
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I…
▽ More
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region.
The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
P. Azzi
, et al. (1439 additional authors not shown)
Abstract:
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.…
▽ More
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Reconstructing Time-of-Flight Detector Values of Angular Streaking Using Machine Learning
Authors:
David Meier,
Wolfram Helml,
Thorsten Otto,
Bernhard Sick,
Jens Viefhaus,
Gregor Hartmann
Abstract:
Angular streaking experiments enable for experimentation in the attosecond regions. However, the deployed Time-of-flight detectors are susceptible to noise and failure. These shortcomings make the outputs of the Time-of-flight detectors hard to understand for humans and further processing, such as for example the extraction of beam properties. In this article, we present an approach to remove high…
▽ More
Angular streaking experiments enable for experimentation in the attosecond regions. However, the deployed Time-of-flight detectors are susceptible to noise and failure. These shortcomings make the outputs of the Time-of-flight detectors hard to understand for humans and further processing, such as for example the extraction of beam properties. In this article, we present an approach to remove high noise levels and reconstruct up to three failed Time-of-flight detectors from an arrangement of 16 Time-of-flight detectors. Due to its fast evaluation time, the presented method is applicable online during a running experiment. It is trained with simulation data, and we show the results of denoising and reconstruction of our method on real-world experiment data.
△ Less
Submitted 15 January, 2025;
originally announced January 2025.
-
Capturing Nonlinear Electron Dynamics with Fully Characterised Attosecond X-ray Pulses
Authors:
Lars Funke,
Markus Ilchen,
Kristina Dingel,
Tommaso Mazza,
Terence Mullins,
Thorsten Otto,
Daniel E. Rivas,
Sara Savio,
Svitozar Serkez,
Peter Walter,
Niclas Wieland,
Lasse Wülfing,
Sadia Bari,
Rebecca Boll,
Markus Braune,
Francesca Calegari,
Alberto De Fanis,
Winfried Decking,
Andreas Duensing,
Stefan Düsterer,
Felix Egun,
Arno Ehresmann,
Benjamin Erk,
Danilo Enoque Ferreira de Lima,
Andreas Galler
, et al. (33 additional authors not shown)
Abstract:
Attosecond X-ray pulses are the key to studying electron dynamics at their natural timescale in specifically targeted electronic states. They promise to build the conceptual bridge between physical and chemical photo-reaction processes. Free-electron lasers (FELs) have demonstrated their capability of generating intense attosecond X-ray pulses. The use of SASE-based FELs for time-resolving experim…
▽ More
Attosecond X-ray pulses are the key to studying electron dynamics at their natural timescale in specifically targeted electronic states. They promise to build the conceptual bridge between physical and chemical photo-reaction processes. Free-electron lasers (FELs) have demonstrated their capability of generating intense attosecond X-ray pulses. The use of SASE-based FELs for time-resolving experiments and investigations of nonlinear X-ray absorption mechanisms, however, necessitates their full pulse-to-pulse characterisation which remains a cutting-edge challenge. We have characterised X-ray pulses with durations of down to 600 attoseconds and peak powers up to 200 GW at ~1 keV photon energy via angular streaking at the Small Quantum Systems instrument of the European XFEL in Germany. As a direct application, we present results of nonlinear X-ray--matter interaction via time-resolved electron spectroscopy on a transient system, observing single- and double-core-hole generation in neon atoms. Using the derived temporal information about each single X-ray pulse, we reveal an otherwise hidden peak-intensity dependence of the probability for formation of double-core vacancies in neon after primary K-shell ionisation. Our results advance the field of attosecond science with highly intense and fully characterised X-ray pulses to the state-specific investigation of electronic motion in non-stationary media.
△ Less
Submitted 20 November, 2024; v1 submitted 7 August, 2024;
originally announced August 2024.
-
Artificial intelligence for online characterization of ultrashort X-ray free-electron laser pulses
Authors:
Kristina Dingel,
Thorsten Otto,
Lutz Marder,
Lars Funke,
Arne Held,
Sara Savio,
Andreas Hans,
Gregor Hartmann,
David Meier,
Jens Viefhaus,
Bernhard Sick,
Arno Ehresmann,
Markus Ilchen,
Wolfram Helml
Abstract:
X-ray free-electron lasers (XFELs) as the world's brightest light sources provide ultrashort X-ray pulses with a duration typically in the order of femtoseconds. Recently, they have approached and entered the attosecond regime, which holds new promises for single-molecule imaging and studying nonlinear and ultrafast phenomena such as localized electron dynamics. The technological evolution of XFEL…
▽ More
X-ray free-electron lasers (XFELs) as the world's brightest light sources provide ultrashort X-ray pulses with a duration typically in the order of femtoseconds. Recently, they have approached and entered the attosecond regime, which holds new promises for single-molecule imaging and studying nonlinear and ultrafast phenomena such as localized electron dynamics. The technological evolution of XFELs toward well-controllable light sources for precise metrology of ultrafast processes has been, however, hampered by the diagnostic capabilities for characterizing X-ray pulses at the attosecond frontier. In this regard, the spectroscopic technique of photoelectron angular streaking has successfully proven how to non-destructively retrieve the exact time-energy structure of XFEL pulses on a single-shot basis. By using artificial intelligence techniques, in particular convolutional neural networks, we here show how this technique can be leveraged from its proof-of-principle stage toward routine diagnostics even at high-repetition-rate XFELs, thus enhancing and refining their scientific accessibility in all related disciplines.
△ Less
Submitted 9 January, 2023; v1 submitted 31 August, 2021;
originally announced August 2021.
-
Conversion Coefficients from Kerma to Ambient Dose and Personal Dose for X-Ray Spectra
Authors:
Thomas Otto
Abstract:
In radiation protection, the protection quantity for whole-body exposure is effective dose $E$. Effective dose cannot be measured and operational quantities have been introduced for dose measurement and calibration of dosimeters and survey instruments. To overcome some shortcomings of the presently used operational quantities, ICRU Report Committee 26 introduces two new quantities for whole body e…
▽ More
In radiation protection, the protection quantity for whole-body exposure is effective dose $E$. Effective dose cannot be measured and operational quantities have been introduced for dose measurement and calibration of dosimeters and survey instruments. To overcome some shortcomings of the presently used operational quantities, ICRU Report Committee 26 introduces two new quantities for whole body exposure, ambient dose $H^*$ for prospective dose assessment and personal dose $H_p(α)$ for retrospective measurements with personal dosimeters. Dosimeters and survey instruments are calibrated in reference fields, realised with radioisotopes and with well-defined x-ray spectra. In this paper, the spectrum-averaged conversion coefficients from kerma in air $K_a$ to the new quantities ambient dose and personal dose are calculated and compared with the published coefficients for the present operational quantities. Especially at low energies ($E_{ph}$ < 40 keV), the new quantities are significantly lower than the present ones, thus correcting a strong overestimate of effective dose.
△ Less
Submitted 5 November, 2019; v1 submitted 12 June, 2019;
originally announced June 2019.
-
Response of Photon Dosimeters and Survey Instruments to New Operational Quantities Proposed by ICRU RC26
Authors:
Thomas Otto
Abstract:
Operational quantities in radiation protection are defined as conservative estimates of the protection quantities, which are generally not accessible to measurement. Radiation protection dosimeters and monitors are calibrated in the operational quantities. An ICRU Report Committee works on a proposal to replace the operational quantities for external radiation ambient dose equivalent and personal…
▽ More
Operational quantities in radiation protection are defined as conservative estimates of the protection quantities, which are generally not accessible to measurement. Radiation protection dosimeters and monitors are calibrated in the operational quantities. An ICRU Report Committee works on a proposal to replace the operational quantities for external radiation ambient dose equivalent and personal dose equivalent by quantities which are defined in close relation to the protection quantities. In this note, the response of dosimeters and survey instruments for photon radiation to these new operational quantities is evaluated.
△ Less
Submitted 8 October, 2018; v1 submitted 23 September, 2018;
originally announced September 2018.
-
Safety
Authors:
C. Adorisio,
I. Bejar Alonso,
J. C. Gascon,
T. Otto,
S. Roesler
Abstract:
Chapter 17 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme tempe…
▽ More
Chapter 17 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
△ Less
Submitted 26 May, 2017;
originally announced May 2017.
-
Nonequilibrium diffusive gas dynamics: Poiseuille microflow
Authors:
Rafail V. Abramov,
Jasmine T. Otto
Abstract:
We test the recently developed hierarchy of diffusive moment closures for gas dynamics together with the near-wall viscosity scaling on the Poiseuille flow of argon and nitrogen in a one micrometer wide channel, and compare it against the corresponding Direct Simulation Monte Carlo computations. We find that the diffusive regularized Grad equations with viscosity scaling provide the most accurate…
▽ More
We test the recently developed hierarchy of diffusive moment closures for gas dynamics together with the near-wall viscosity scaling on the Poiseuille flow of argon and nitrogen in a one micrometer wide channel, and compare it against the corresponding Direct Simulation Monte Carlo computations. We find that the diffusive regularized Grad equations with viscosity scaling provide the most accurate approximation to the benchmark DSMC results. At the same time, the conventional Navier-Stokes equations without the near-wall viscosity scaling are found to be the least accurate among the tested closures.
△ Less
Submitted 21 May, 2017;
originally announced May 2017.
-
Thermal Maps of Gases in Heterogeneous Reactions
Authors:
Nanette N. Jarenwattananon,
Stefan Gloeggler,
Trenton Otto,
Arek Melkonian,
William Morris,
Scott R. Burt,
Omar M. Yaghi,
Louis-S. Bouchard
Abstract:
Over 85% of all chemical industry products are made using catalysts, with the overwhelming majority of these employing heterogeneous catalysts functioning at the gas-solid interface. Consequently, optimizing catalytic reactor design attracts much effort. Such optimization relies on heat transfer and fluid dynamics modeling coupled to surface reaction kinetics. The complexity of these systems deman…
▽ More
Over 85% of all chemical industry products are made using catalysts, with the overwhelming majority of these employing heterogeneous catalysts functioning at the gas-solid interface. Consequently, optimizing catalytic reactor design attracts much effort. Such optimization relies on heat transfer and fluid dynamics modeling coupled to surface reaction kinetics. The complexity of these systems demands many approximations, which can only be tested with experimental observations of quantities such as temperature, pressure, concentrations, flow rates, etc. One essential measurement is a map of the spatial variation in temperature throughout the catalyst bed. We present here the first non-invasive maps of gas temperatures in catalyst-filled reactors, including high spatial resolution maps in microreactors enabled by parahydrogen. The thermal maps reveal energy flux patterns whose length scale correlates with the catalyst packing. By exploiting the motional averaging under a weak applied magnetic-field gradient, the nuclear magnetic resonance (NMR) linewidths are inversely proportional to temperature. Measurements during the hydrogenation of propylene in reactors packed with metal nanoparticles and metal-organic framework catalysts yield temperature coefficients of ~0.1 Hz/K, and temperature error <4%. Temperature sensitivity increases with gradient strength, enabling tuning of precision.
△ Less
Submitted 21 June, 2015;
originally announced June 2015.
-
Path Coupling and Aggregate Path Coupling
Authors:
Yevgeniy Kovchegov,
Peter T. Otto
Abstract:
In this survey paper, we describe and characterize an extension to the classical path coupling method applied statistical mechanical models, referred to as aggregate path coupling. In conjunction with large deviations estimates, we use this aggregate path coupling method to prove rapid mixing of Glauber dynamics for a large class of statistical mechanical models, including models that exhibit disc…
▽ More
In this survey paper, we describe and characterize an extension to the classical path coupling method applied statistical mechanical models, referred to as aggregate path coupling. In conjunction with large deviations estimates, we use this aggregate path coupling method to prove rapid mixing of Glauber dynamics for a large class of statistical mechanical models, including models that exhibit discontinuous phase transitions which have traditionally been more difficult to analyze rigorously. The parameter region for rapid mixing for the generalized Curie-Weiss-Potts model is derived as a new application of the aggregate path coupling method.
△ Less
Submitted 13 January, 2015;
originally announced January 2015.
-
A study of high-energy proton induced damage in Cerium Fluoride in comparison with measurements in Lead Tungstate calorimeter crystals
Authors:
G. Dissertori,
P. Lecomte,
D. Luckey,
F. Nessi-Tedaldi,
Th. Otto,
F. Pauss,
S. Roesler,
Ch. Urscheler
Abstract:
A Cerium Fluoride crystal produced during early R&D studies for calorimetry at the CERN Large Hadron Collider was exposed to a 24 GeV/c proton fluence Phi_p=(2.78 +- 0.20) x 10EE13 cm-2 and, after one year of measurements tracking its recovery, to a fluence Phi_p=(2.12 +- 0.15) x 10EE14 cm-2. Results on proton-induced damage to the crystal and its spontaneous recovery after both irradiations are…
▽ More
A Cerium Fluoride crystal produced during early R&D studies for calorimetry at the CERN Large Hadron Collider was exposed to a 24 GeV/c proton fluence Phi_p=(2.78 +- 0.20) x 10EE13 cm-2 and, after one year of measurements tracking its recovery, to a fluence Phi_p=(2.12 +- 0.15) x 10EE14 cm-2. Results on proton-induced damage to the crystal and its spontaneous recovery after both irradiations are presented here, along with some new, complementary data on proton-damage in Lead Tungstate. A comparison with FLUKA Monte Carlo simulation results is performed and a qualitative understanding of high-energy damage mechanism is attempted.
△ Less
Submitted 6 May, 2010;
originally announced May 2010.
-
Design of the EURISOL multi-MW target assembly: radiation and safety issues
Authors:
M. Felcini,
A. Herrera-Martinez,
Y. Kadi,
T. Otto,
L. Tecchio
Abstract:
The multi-MW target proposed for the EURISOL facility will be based on fission of uranium (or thorium) compounds to produce rare isotopes far from stability. A two-step process is used for the isotope production. First, neutrons are generated in a liquid mercury target, irradiated by the 1 GeV proton or deuteron beam, provided by the EURISOL linac driver. Then, the neutrons induce fission in a s…
▽ More
The multi-MW target proposed for the EURISOL facility will be based on fission of uranium (or thorium) compounds to produce rare isotopes far from stability. A two-step process is used for the isotope production. First, neutrons are generated in a liquid mercury target, irradiated by the 1 GeV proton or deuteron beam, provided by the EURISOL linac driver. Then, the neutrons induce fission in a surrounding assembly of uranium carbide. R&D projects on several aspects of the target assembly are ongoing. Key criteria for the target design are a maximum beam power capability of 4 MW, a remote handling system with minimum downtime and maximum reliability, as well as radiation safety, minimization of hazards and the classification of the facility. In the framework of the ongoing radiation characterization and safety studies, radiation transport simulations have been performed to calculate the prompt radiation dose in the target and surrounding materials, as well as to determine shielding material and angle-dependent parameters. In this paper, we report the results of these studies and the proposed radiation shield design for the multi-MW target area. Furthermore, accurate estimates have been performed of the amount of fissile elements being produced in the uranium target assembly, for typical running conditions, in order to understand the implications for the classification of the facility. The results are reported and briefly discussed.
△ Less
Submitted 3 August, 2006; v1 submitted 1 August, 2006;
originally announced August 2006.
