-
A Novel Approach to Real-Time Short-Term Traffic Prediction based on Distributed Fiber-Optic Sensing and Data Assimilation with a Stochastic Cell-Automata Model
Authors:
Yoshiyuki Yajima,
Hemant Prasad,
Daisuke Ikefuji,
Takemasa Suzuki,
Shin Tominaga,
Hitoshi Sakurai,
Manabu Otani
Abstract:
This paper demonstrates real-time short-term traffic flow prediction through distributed fiber-optic sensing (DFOS) and data assimilation with a stochastic cell-automata-based traffic model. Traffic congestion on expressways is a severe issue. To alleviate its negative impacts, it is necessary to optimize traffic flow prior to becoming serious congestion. For this purpose, real-time short-term tra…
▽ More
This paper demonstrates real-time short-term traffic flow prediction through distributed fiber-optic sensing (DFOS) and data assimilation with a stochastic cell-automata-based traffic model. Traffic congestion on expressways is a severe issue. To alleviate its negative impacts, it is necessary to optimize traffic flow prior to becoming serious congestion. For this purpose, real-time short-term traffic flow prediction is promising. However, conventional traffic monitoring apparatus used in prediction methods faces a technical issue due to the sparsity in traffic flow data. To overcome the issue for realizing real-time traffic prediction, this paper employs DFOS, which enables to obtain spatially continuous and real-time traffic flow data along the road without dead zones. Using mean velocities derived from DFOS data as a feature extraction, this paper proposes a real-time data assimilation method for the short-term prediction. As the theoretical model, the stochastic Nishinari-Fukui-Schadschneider model is adopted. Future traffic flow is simulated with the optimal values of model parameters estimated from observed mean velocities and the initial condition estimated as the latest microscopic traffic state. This concept is validated using two congestion scenarios obtained in Japanese expressways. The results show that the mean absolute error of the predicted mean velocities is 10-15 km/h in the prediction horizon of 30 minutes. Furthermore, the prediction error in congestion length and travel time decreases by 40-84% depending on congestion scenarios when compared with conventional methods with traffic counters. This paper concludes that real-time data assimilation using DFOS enables an accurate short-term traffic prediction.
△ Less
Submitted 7 January, 2025;
originally announced January 2025.
-
Acceleration of positive muons by a radio-frequency cavity
Authors:
S. Aritome,
K. Futatsukawa,
H. Hara,
K. Hayasaka,
Y. Ibaraki,
T. Ichikawa,
T. Iijima,
H. Iinuma,
Y. Ikedo,
Y. Imai,
K. Inami,
K. Ishida,
S. Kamal,
S. Kamioka,
N. Kawamura,
M. Kimura,
A. Koda,
S. Koji,
K. Kojima,
A. Kondo,
Y. Kondo,
M. Kuzuba,
R. Matsushita,
T. Mibe,
Y. Miyamoto
, et al. (30 additional authors not shown)
Abstract:
Acceleration of positive muons from thermal energy to $100~$keV has been demonstrated. Thermal muons were generated by resonant multi-photon ionization of muonium atoms emitted from a sheet of laser-ablated aerogel. The thermal muons were first electrostatically accelerated to $5.7~$keV, followed by further acceleration to 100 keV using a radio-frequency quadrupole. The transverse normalized emitt…
▽ More
Acceleration of positive muons from thermal energy to $100~$keV has been demonstrated. Thermal muons were generated by resonant multi-photon ionization of muonium atoms emitted from a sheet of laser-ablated aerogel. The thermal muons were first electrostatically accelerated to $5.7~$keV, followed by further acceleration to 100 keV using a radio-frequency quadrupole. The transverse normalized emittance of the accelerated muons in the horizontal and vertical planes were $0.85 \pm 0.25 ~\rm{(stat.)}~^{+0.22}_{-0.13} ~\rm{(syst.)}~π~$mm$\cdot$mrad and $0.32\pm 0.03~\rm{(stat.)} ^{+0.05}_{-0.02} ~\rm{(syst.)}~π~$mm$\cdot$mrad, respectively. The measured emittance values demonstrated phase space reduction by a factor of $2.0\times 10^2$ (horizontal) and $4.1\times 10^2$ (vertical) allowing good acceleration efficiency. These results pave the way to realize the first-ever muon accelerator for a variety of applications in particle physics, material science, and other fields.
△ Less
Submitted 17 June, 2025; v1 submitted 15 October, 2024;
originally announced October 2024.
-
First muon acceleration and muon linear accelerator for measuring the muon anomalous magnetic moment and electric dipole moment
Authors:
M. Otani
Abstract:
Muon acceleration using a radio-frequency accelerator was recently demonstrated for the first time. Measurement of the muon anomalous magnetic moment and electric dipole moment at Japan Proton Accelerator Research Complex is the first experiment using accelerated muon beams, and construction will begin soon. The radio-frequency accelerator used in the experiment and the first muon acceleration are…
▽ More
Muon acceleration using a radio-frequency accelerator was recently demonstrated for the first time. Measurement of the muon anomalous magnetic moment and electric dipole moment at Japan Proton Accelerator Research Complex is the first experiment using accelerated muon beams, and construction will begin soon. The radio-frequency accelerator used in the experiment and the first muon acceleration are described in this paper.
△ Less
Submitted 4 April, 2022;
originally announced April 2022.
-
Bias-dependent diffusion of H$_2$O molecules on an Al(111) surface
Authors:
Satoshi Hagiwara,
Chunping Hu,
Satomichi Nishihara,
Minoru Otani
Abstract:
We investigate the process by which a water molecule diffuses on the surface of an Al(111) electrode under constant bias voltage by first-principles density functional theory. To understand the diffusion path of the water on the Al(111), we calculated the minimum energy path (MEP) determined by the nudged elastic band method in combination with constant electron chemical potential (constant-…
▽ More
We investigate the process by which a water molecule diffuses on the surface of an Al(111) electrode under constant bias voltage by first-principles density functional theory. To understand the diffusion path of the water on the Al(111), we calculated the minimum energy path (MEP) determined by the nudged elastic band method in combination with constant electron chemical potential (constant-$μ_{\rm e}$) methods. The simulation shows that the MEP of the water molecule, its adsorption site, and the activation barrier strongly depend on the applied bias voltage. This strong dependence of the water diffusion process on the bias voltage is in good agreement with the result of a previous scanning tunneling microscopy (STM) experiment. The agreement between the theoretical and experimental results implies that accurate treatment of bias voltage plays a significant role in understanding the interaction between the electric field and the surface of the material. Comparative studies of the diffusion process with the constant total number of electrons (constant-$N_\mathrm{e}$) scheme show that the absence of strong interaction between the molecular dipole and the electric field leads to a different understanding of how water diffuses on a metal surface. The proposed constant-$μ_{\rm e}$ scheme is a realistic tool for the simulation of reactions under bias voltage not only using STM but also at the electrochemical interface.
△ Less
Submitted 18 December, 2020;
originally announced December 2020.
-
Study on the free corrosion potential at an interface between an Al electrode and an acidic aqueous NaCl solution through density functional theory combined with the reference interaction site model
Authors:
Koichi Kano,
Satoshi Hagiwara,
Takahiro Igarashi,
Minoru Otani
Abstract:
We investigated the free corrosion potential at an interface between an Al electrode and an aqueous NaCl solution (NaCl(aq)) under acidic conditions via density functional theory combined with the effective screening medium and reference interaction site model (ESM-RISM). Firstly, the electrode potentials for the anodic and cathodic corrosion reactions were obtained from the grand potential profil…
▽ More
We investigated the free corrosion potential at an interface between an Al electrode and an aqueous NaCl solution (NaCl(aq)) under acidic conditions via density functional theory combined with the effective screening medium and reference interaction site model (ESM-RISM). Firstly, the electrode potentials for the anodic and cathodic corrosion reactions were obtained from the grand potential profile as a function of the electron chemical potential at the interface. Thereafter, we determined the free corrosion potential using the Tafel extrapolation method. The results of the free corrosion potential were consistent with previous experimental data. By controlling the pH of the NaCl(aq), we determined the pH dependence of the free corrosion potential, and the results agreed well with the experimental results. Our results indicated that the ESM-RISM method duly described the environmental effect of an acidic solution and precisely determined the free corrosion potential. Therefore, the application of this method presents an efficient approach toward calculating the free corrosion potential for various reactions.
△ Less
Submitted 15 March, 2021; v1 submitted 27 November, 2020;
originally announced November 2020.
-
Study of muonium emission from laser-ablated silica aerogel
Authors:
J. Beare,
G. Beer,
J. H. Brewer,
T. Iijima,
K. Ishida,
M. Iwasaki,
S. Kamal,
K. Kanamori,
N. Kawamura,
R. Kitamura,
S. Li,
G. M. Luke,
G. M. Marshall,
T. Mibe,
Y. Miyake,
Y. Oishi,
K. Olchanski,
A. Olin,
M. Otani,
M. A. Rehman,
N. Saito,
Y. Sato,
K. Shimomura,
K. Suzuki,
M. Tabata
, et al. (1 additional authors not shown)
Abstract:
The emission of muonium ($μ^+e^-$) atoms into vacuum from silica aerogel with laser ablation on its surface was studied with various ablation structures at room temperature using the subsurface muon beams at TRIUMF and Japan Proton Accelerator Research Complex (J-PARC). Laser ablation was applied to produce holes or grooves with typical dimensions of a few hundred $μ$m to a few mm, except for some…
▽ More
The emission of muonium ($μ^+e^-$) atoms into vacuum from silica aerogel with laser ablation on its surface was studied with various ablation structures at room temperature using the subsurface muon beams at TRIUMF and Japan Proton Accelerator Research Complex (J-PARC). Laser ablation was applied to produce holes or grooves with typical dimensions of a few hundred $μ$m to a few mm, except for some extreme conditions. The measured emission rate tends to be higher for larger fractions of ablation opening and for shallower depths. More than a few ablation structures reach the emission rates similar to the highest achieved in the past measurements. The emission rate is found to be stable at least for a couple of days. Measurements of spin precession amplitudes for the produced muonium atoms and remaining muons in a magnetic field determine a muonium formation fraction of $(65.5 \pm 1.8)$%. The precession of the polarized muonium atoms is also observed clearly in vacuum. A projection of the emission rates measured at TRIUMF to the corresponding rates at J-PARC is demonstrated taking the different beam condition into account reasonably.
△ Less
Submitted 1 September, 2020; v1 submitted 2 June, 2020;
originally announced June 2020.
-
Compact buncher cavity for muons accelerated by a radio-frequency quadrupole
Authors:
M. Otani,
Y. Sue,
K. Futatsukawa,
T. Iijima,
H. Iinuma,
N. Kawamura,
R. Kitamura,
Y. Kondo,
T. Morishita,
Y. Nakazawa,
H. Yasuda,
M. Yotsuzuka,
N. Saito,
T. Yamazaki
Abstract:
A buncher cavity has been developed for the muons accelerated by a radio-frequency quadrupole linac (RFQ). The buncher cavity is designed for $β=v/c=0.04$ at an operational frequency of 324 MHz. It employs a double-gap structure operated in the TEM mode for the required effective voltage with compact dimensions, in order to account for the limited space of the experiment. The measured resonant fre…
▽ More
A buncher cavity has been developed for the muons accelerated by a radio-frequency quadrupole linac (RFQ). The buncher cavity is designed for $β=v/c=0.04$ at an operational frequency of 324 MHz. It employs a double-gap structure operated in the TEM mode for the required effective voltage with compact dimensions, in order to account for the limited space of the experiment. The measured resonant frequency and unloaded quality factor are 323.95 MHz and $3.06\times10^3$, respectively. The buncher cavity was successfully operated for longitudinal bunch size measurement of the muons accelerated by the RFQ.
△ Less
Submitted 4 July, 2019;
originally announced July 2019.
-
A New Approach for Measuring the Muon Anomalous Magnetic Moment and Electric Dipole Moment
Authors:
M. Abe,
S. Bae,
G. Beer,
G. Bunce,
H. Choi,
S. Choi,
M. Chung,
W. da Silva,
S. Eidelman,
M. Finger,
Y. Fukao,
T. Fukuyama,
S. Haciomeroglu,
K. Hasegawa,
K. Hayasaka,
N. Hayashizaki,
H. Hisamatsu,
T. Iijima,
H. Iinuma,
K. Inami,
H. Ikeda,
M. Ikeno,
K. Ishida,
T. Itahashi,
M. Iwasaki
, et al. (71 additional authors not shown)
Abstract:
This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon…
▽ More
This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon $g-2$ experiments with unprecedented quality of the storage magnetic field. Additional significant differences from the present experimental method include a factor of 1,000 smaller transverse emittance of the muon beam (reaccelerated thermal muon beam), its efficient vertical injection into the solenoid, and tracking each decay positron from muon decay to obtain its momentum vector. The precision goal for $a_μ$ is statistical uncertainty of 450 part per billion (ppb), similar to the present experimental uncertainty, and a systematic uncertainty less than 70 ppb. The goal for EDM is a sensitivity of $1.5\times 10^{-21}~e\cdot\mbox{cm}$.
△ Less
Submitted 10 March, 2019; v1 submitted 10 January, 2019;
originally announced January 2019.
-
First muon acceleration using a radio frequency accelerator
Authors:
S. Bae,
H. Choi,
S. Choi,
Y. Fukao,
K. Futatsukawa,
K. Hasegawa,
T. Iijima,
H. Iinuma,
K. Ishida,
N. Kawamura,
B. Kim,
R. Kitamura,
H. S. Ko,
Y. Kondo,
S. Li,
T. Mibe,
Y. Miyake,
T. Morishita,
Y. Nakazawa,
M. Otani,
G. P. Razuvaev,
N. Saito,
K. Shimomura,
Y. Sue,
E. Won
, et al. (1 additional authors not shown)
Abstract:
Muons have been accelerated by using a radio frequency accelerator for the first time. Negative muonium atoms (Mu$^-$), which are bound states of positive muons ($μ^+$) and two electrons, are generated from $μ^+$'s through the electron capture process in an aluminum degrader. The generated Mu$^-$'s are initially electrostatically accelerated and injected into a radio frequency quadrupole linac (RF…
▽ More
Muons have been accelerated by using a radio frequency accelerator for the first time. Negative muonium atoms (Mu$^-$), which are bound states of positive muons ($μ^+$) and two electrons, are generated from $μ^+$'s through the electron capture process in an aluminum degrader. The generated Mu$^-$'s are initially electrostatically accelerated and injected into a radio frequency quadrupole linac (RFQ). In the RFQ, the Mu$^-$'s are accelerated to 89 keV. The accelerated Mu$^-$'s are identified by momentum measurement and time of flight. This compact muon linac opens the door to various muon accelerator applications including particle physics measurements and the construction of a transmission muon microscope.
△ Less
Submitted 21 March, 2018;
originally announced March 2018.
-
Search for double-beta decay of 136Xe to excited states of 136Ba with the KamLAND-Zen experiment
Authors:
KamLAND-Zen Collaboration,
:,
K. Asakura,
A. Gando,
Y. Gando,
T. Hachiya,
S. Hayashida,
H. Ikeda,
K. Inoue,
K. Ishidoshiro,
T. Ishikawa,
S. Ishio,
M. Koga,
S. Matsuda,
T. Mitsui,
D. Motoki,
K. Nakamura,
S. Obara,
M. Otani,
T. Oura,
I. Shimizu,
Y. Shirahata,
J. Shirai,
A. Suzuki,
H. Tachibana
, et al. (21 additional authors not shown)
Abstract:
A search for double-beta decays of 136Xe to excited states of 136Ba has been performed with the first phase data set of the KamLAND-Zen experiment. The 0+1, 2+1 and 2+2 transitions of 0ν\{beta}\{beta} decay were evaluated in an exposure of 89.5kg-yr of 136Xe, while the same transitions of 2ν\{beta}\{beta} decay were evaluated in an exposure of 61.8kg-yr. No excess over background was found for all…
▽ More
A search for double-beta decays of 136Xe to excited states of 136Ba has been performed with the first phase data set of the KamLAND-Zen experiment. The 0+1, 2+1 and 2+2 transitions of 0ν\{beta}\{beta} decay were evaluated in an exposure of 89.5kg-yr of 136Xe, while the same transitions of 2ν\{beta}\{beta} decay were evaluated in an exposure of 61.8kg-yr. No excess over background was found for all decay modes. The lower half-life limits of the 2+1 state transitions of 0ν\{beta}\{beta} and 2ν\{beta}\{beta} decay were improved to T(0ν, 0+ \rightarrow 2+) > 2.6\times10^25 yr and T(2ν, 0+ \rightarrow 2+) > 4.6\times10^23 yr (90% C.L.), respectively. We report on the first experimental lower half-life limits for the transitions to the 0+1 state of 136Xe for 0ν\{beta}\{beta} and 2ν\{beta}\{beta} decay. They are T (0ν, 0+ \rightarrow 0+) > 2.4\times10^25 yr and T(2ν, 0+ \rightarrow 0+) > 8.3\times10^23 yr (90% C.L.). The transitions to the 2+2 states are also evaluated for the first time to be T(0ν, 0+ \rightarrow 2+) > 2.6\times10^25 yr and T(2ν, 0+ \rightarrow 2+) > 9.0\times10^23 yr (90% C.L.). These results are compared to recent theoretical predictions.
△ Less
Submitted 8 December, 2015; v1 submitted 12 September, 2015;
originally announced September 2015.
-
Enhancement of muonium emission rate from silica aerogel with a laser ablated surface
Authors:
G. A. Beer,
Y. Fujiwara,
S. Hirota,
K. Ishida,
M. Iwasaki,
S. Kanda,
H. Kawai,
N. Kawamura,
R. Kitamura,
S. Lee,
W. Lee G. M. Marshall,
T. Mibe,
Y. Miyake,
S. Okada,
K. Olchanski,
A. Olin,
Y. Oishi,
H. Onishi,
M. Otani,
N. Saito,
K. Shimomura,
P. Strasser,
M. Tabata,
D. Tomono,
K. Ueno
, et al. (2 additional authors not shown)
Abstract:
Emission of muonium ($μ^+e^-$) atoms from a laser-processed aerogel surface into vacuum was studied for the first time. Laser ablation was used to create hole-like regions with diameter of about 270$~μ$m in a triangular pattern with hole separation in the range of 300--500$~μ$m. The emission probability for the laser-processed aerogel sample is at least eight times higher than for a uniform one.
Emission of muonium ($μ^+e^-$) atoms from a laser-processed aerogel surface into vacuum was studied for the first time. Laser ablation was used to create hole-like regions with diameter of about 270$~μ$m in a triangular pattern with hole separation in the range of 300--500$~μ$m. The emission probability for the laser-processed aerogel sample is at least eight times higher than for a uniform one.
△ Less
Submitted 30 July, 2014;
originally announced July 2014.
-
CeLAND: search for a 4th light neutrino state with a 3 PBq 144Ce-144Pr electron antineutrino generator in KamLAND
Authors:
A. Gando,
Y. Gando,
S. Hayashida,
H. Ikeda,
K. Inoue,
K. Ishidoshiro,
H. Ishikawa,
M. Koga,
R. Matsuda,
S. Matsuda,
T. Mitsui,
D. Motoki,
K. Nakamura,
Y. Oki,
M. Otani,
I. Shimizu,
J. Shirai,
F. Suekane,
A. Suzuki,
Y. Takemoto,
K. Tamae,
K. Ueshima,
H. Watanabe,
B. D. Xu,
S. Yamada
, et al. (41 additional authors not shown)
Abstract:
The reactor neutrino and gallium anomalies can be tested with a 3-4 PBq (75-100 kCi scale) 144Ce-144Pr antineutrino beta-source deployed at the center or next to a large low-background liquid scintillator detector. The antineutrino generator will be produced by the Russian reprocessing plant PA Mayak as early as 2014, transported to Japan, and deployed in the Kamioka Liquid Scintillator Anti-Neutr…
▽ More
The reactor neutrino and gallium anomalies can be tested with a 3-4 PBq (75-100 kCi scale) 144Ce-144Pr antineutrino beta-source deployed at the center or next to a large low-background liquid scintillator detector. The antineutrino generator will be produced by the Russian reprocessing plant PA Mayak as early as 2014, transported to Japan, and deployed in the Kamioka Liquid Scintillator Anti-Neutrino Detector (KamLAND) as early as 2015. KamLAND's 13 m diameter target volume provides a suitable environment to measure the energy and position dependence of the detected neutrino flux. A characteristic oscillation pattern would be visible for a baseline of about 10 m or less, providing a very clean signal of neutrino disappearance into a yet-unknown, sterile neutrino state. This will provide a comprehensive test of the electron dissaperance neutrino anomalies and could lead to the discovery of a 4th neutrino state for Delta_m^2 > 0.1 eV^2 and sin^2(2theta) > 0.05.
△ Less
Submitted 13 April, 2014; v1 submitted 3 December, 2013;
originally announced December 2013.
-
Calibration of the Super-Kamiokande Detector
Authors:
K. Abe,
Y. Hayato,
T. Iida,
K. Iyogi,
J. Kameda,
Y. Kishimoto,
Y. Koshio,
Ll. Marti,
M. Miura,
S. Moriyama,
M. Nakahata,
Y. Nakano,
S. Nakayama,
Y. Obayashi,
H. Sekiya,
M. Shiozawa,
Y. Suzuki,
A. Takeda,
Y. Takenaga,
H. Tanaka,
T. Tomura,
K. Ueno,
R. A. Wendell,
T. Yokozawa,
T. J. Irvine
, et al. (108 additional authors not shown)
Abstract:
Procedures and results on hardware level detector calibration in Super-Kamiokande (SK) are presented in this paper. In particular, we report improvements made in our calibration methods for the experimental phase IV in which new readout electronics have been operating since 2008. The topics are separated into two parts. The first part describes the determination of constants needed to interpret th…
▽ More
Procedures and results on hardware level detector calibration in Super-Kamiokande (SK) are presented in this paper. In particular, we report improvements made in our calibration methods for the experimental phase IV in which new readout electronics have been operating since 2008. The topics are separated into two parts. The first part describes the determination of constants needed to interpret the digitized output of our electronics so that we can obtain physical numbers such as photon counts and their arrival times for each photomultiplier tube (PMT). In this context, we developed an in-situ procedure to determine high-voltage settings for PMTs in large detectors like SK, as well as a new method for measuring PMT quantum efficiency and gain in such a detector. The second part describes the modeling of the detector in our Monte Carlo simulation, including in particular the optical properties of its water target and their variability over time. Detailed studies on the water quality are also presented. As a result of this work, we achieved a precision sufficient for physics analysis over a wide energy range (from a few MeV to above a TeV). For example, the charge determination was understood at the 1% level, and the timing resolution was 2.1 nsec at the one-photoelectron charge level and 0.5 nsec at the 100-photoelectron charge level.
△ Less
Submitted 20 December, 2013; v1 submitted 29 June, 2013;
originally announced July 2013.
-
Measurements of the T2K neutrino beam properties using the INGRID on-axis near detector
Authors:
K. Abe,
N. Abgrall,
Y. Ajima,
H. Aihara,
J. B. Albert,
C. Andreopoulos,
B. Andrieu,
M. D. Anerella,
S. Aoki,
O. Araoka,
J. Argyriades,
A. Ariga,
T. Ariga,
S. Assylbekov,
D. Autiero,
A. Badertscher,
M. Barbi,
G. J. Barker,
G. Barr,
M. Bass,
M. Batkiewicz,
F. Bay,
S. Bentham,
V. Berardi,
B. E. Berger
, et al. (407 additional authors not shown)
Abstract:
Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino oscillation experiment. INGRID consists of 16 identical modules arranged in horizontal and vertical arrays around the beam center. The module has a sandwich structure o…
▽ More
Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino oscillation experiment. INGRID consists of 16 identical modules arranged in horizontal and vertical arrays around the beam center. The module has a sandwich structure of iron target plates and scintillator trackers. INGRID directly monitors the muon neutrino beam profile center and intensity using the number of observed neutrino events in each module. The neutrino beam direction is measured with accuracy better than 0.4 mrad from the measured profile center. The normalized event rate is measured with 4% precision.
△ Less
Submitted 14 November, 2011;
originally announced November 2011.
-
The T2K Experiment
Authors:
T2K Collaboration,
K. Abe,
N. Abgrall,
H. Aihara,
Y. Ajima,
J. B. Albert,
D. Allan,
P. -A. Amaudruz,
C. Andreopoulos,
B. Andrieu,
M. D. Anerella,
C. Angelsen,
S. Aoki,
O. Araoka,
J. Argyriades,
A. Ariga,
T. Ariga,
S. Assylbekov,
J. P. A. M. de André,
D. Autiero,
A. Badertscher,
O. Ballester,
M. Barbi,
G. J. Barker,
P. Baron
, et al. (499 additional authors not shown)
Abstract:
The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross…
▽ More
The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross section measurements and sterile neutrino searches. The experiment uses an intense proton beam generated by the J-PARC accelerator in Tokai, Japan, and is composed of a neutrino beamline, a near detector complex (ND280), and a far detector (Super-Kamiokande) located 295 km away from J-PARC. This paper provides a comprehensive review of the instrumentation aspect of the T2K experiment and a summary of the vital information for each subsystem.
△ Less
Submitted 8 June, 2011; v1 submitted 6 June, 2011;
originally announced June 2011.
-
Performance of Multi-Pixel Photon Counters for the T2K near detectors
Authors:
M. Yokoyama,
A. Minamino,
S. Gomi,
K. Ieki,
N. Nagai,
T. Nakaya,
K. Nitta,
D. Orme,
M. Otani,
T. Murakami,
T. Nakadaira,
M. Tanaka
Abstract:
We have developed a Multi-Pixel Photon Counter (MPPC) for the neutrino detectors of T2K experiment. About 64,000 MPPCs have been produced and tested in about a year. In order to characterize a large number of MPPCs, we have developed a system that simultaneously measures 64 MPPCs with various bias voltage and temperature. The performance of MPPCs are found to satisfy the requirement of T2K experim…
▽ More
We have developed a Multi-Pixel Photon Counter (MPPC) for the neutrino detectors of T2K experiment. About 64,000 MPPCs have been produced and tested in about a year. In order to characterize a large number of MPPCs, we have developed a system that simultaneously measures 64 MPPCs with various bias voltage and temperature. The performance of MPPCs are found to satisfy the requirement of T2K experiment. In this paper, we present the performance of 17,686 MPPCs measured at Kyoto University.
△ Less
Submitted 16 July, 2010;
originally announced July 2010.
-
Mass production test of Hamamatsu MPPC for T2K neutrino oscillation experiment
Authors:
M. Yokoyama,
T. Nakaya,
S. Gomi,
A. Minamino,
N. Nagai,
K. Nitta,
D. Orme,
M. Otani,
T. Murakami,
T. Nakadaira,
M. Tanaka
Abstract:
In the T2K near neutrino detectors, about 60 000 Hamamatsu Multi-Pixel Photon Counters (MPPCs) will be used. The mass production of MPPC has started in February 2008.In order to perform quality assurance and to characterize each device, we have developed an MPPC test system. For each MPPC, gain, breakdown voltage, noise rate, photo detection efficiency, and cross-talk and after-pulse rate are me…
▽ More
In the T2K near neutrino detectors, about 60 000 Hamamatsu Multi-Pixel Photon Counters (MPPCs) will be used. The mass production of MPPC has started in February 2008.In order to perform quality assurance and to characterize each device, we have developed an MPPC test system. For each MPPC, gain, breakdown voltage, noise rate, photo detection efficiency, and cross-talk and after-pulse rate are measured as functions of the bias voltage and temperature. The design of the test system and the measurement procedure are described.
△ Less
Submitted 20 July, 2008;
originally announced July 2008.
-
Application of Hamamatsu MPPC to T2K Neutrino Detectors
Authors:
M. Yokoyama,
T. Nakaya,
S. Gomi,
A. Minamino,
N. Nagai,
K. Nitta,
D. Orme,
M. Otani,
T. Murakami,
T. Nakadaira,
M. Tanaka,
Yu. Kudenko,
F. Retiere,
A. Vacheret
Abstract:
A special type of Hamamatsu MPPC, with a sensitive area of 1.3x1.3mm^2 containing 667 pixels with 50x50um^2 each, has been developed for the near neutrino detector in the T2K long baseline neutrino experiment. About 60 000 MPPCs will be used in total to read out the plastic scintillator detectors with wavelength shifting fibers. We report on the basic performance of MPPCs produced for T2K.
A special type of Hamamatsu MPPC, with a sensitive area of 1.3x1.3mm^2 containing 667 pixels with 50x50um^2 each, has been developed for the near neutrino detector in the T2K long baseline neutrino experiment. About 60 000 MPPCs will be used in total to read out the plastic scintillator detectors with wavelength shifting fibers. We report on the basic performance of MPPCs produced for T2K.
△ Less
Submitted 20 July, 2008;
originally announced July 2008.
-
Flow characteristics and gelatinization kinetics of rice starch under strong alkali conditions
Authors:
H. Yamamoto,
E. Makita,
Y. Oki,
M. Otani
Abstract:
The normality dependence and the kinetics of flow behavior in the rice starch dispersion under strong alkali conditions were studied. Non-Newtonian flow (power-law) quantities n and μ(σ=μ(\dotε)^n; σ: shear stress, \dotε: shear rate) of the samples stored (gelatinized) at 20^{\circ}C for 10min after the addition of NaOH solution with the normality 0.090 - 0.175N, were measured by a cone-plate ty…
▽ More
The normality dependence and the kinetics of flow behavior in the rice starch dispersion under strong alkali conditions were studied. Non-Newtonian flow (power-law) quantities n and μ(σ=μ(\dotε)^n; σ: shear stress, \dotε: shear rate) of the samples stored (gelatinized) at 20^{\circ}C for 10min after the addition of NaOH solution with the normality 0.090 - 0.175N, were measured by a cone-plate type rotational viscometer. For the flow analysis a care was taken for the ambiguity of the analysis range of flow data. The samples added with 0.14 - 0.16N NaOH displayed an apparently dilatant flow. As the normality of added NaOH increased, apparent viscosity η_a was steeply enhanced in the vicinity of 0.14N and started to grow almost exponentially. Next, the storage time dependence of flow properties was investigated for samples gelatinized for 6<t[min]<230 after the addition of 0.146N NaOH solution. A Newtonian analysis of the flow (σ- \dotε) data indicated that viscosity ηincreased exponentially in the early stage (6<t<35) and did linearly in the middle. It was argued that the observed time dependence of viscosity could be described by a first-order reaction hypothesis combined with the fluidity (η^{-1}) mixing rule with respect to ungelatinized and gelatinized fractions of starch. The application of this theoretical treatment to the present data suggested that the gelatinization process was composed of plural phases with different values of a rate constant. For the observed kinetic characteristic of alkali gelatinization, the discussions were presented on the basis of amylose complex formation.
△ Less
Submitted 24 December, 2004;
originally announced December 2004.
