-
Two-Dimensional Gallium Sulfide Nanoflakes for UV-Selective Photoelectrochemical-type Photodetectors
Authors:
Marilena I. Zappia,
Gabriele Bianca,
Sebastiano Bellani,
Nicola Curreli,
Zdeněk Sofer,
Michele Serri,
Leyla Najafi,
Marco Piccinni,
Reinier Oropesa-Nuñez,
Petr Marvan,
Vittorio Pellegrini,
Ilka Kriegel,
Mirko Prato,
Anna Cupolillo,
Francesco Bonaccorso
Abstract:
Two-dimensional (2D) transition-metal monochalcogenides have been recently predicted to be potential photo(electro)catalysts for water splitting and photoelectrochemical (PEC) reactions. Differently from the most established InSe, GaSe, GeSe, and many other monochalcogenides, bulk GaS has a large band gap of ca. 2.5 eV, which increases up to more than 3.0 eV with decreasing its thickness due to qu…
▽ More
Two-dimensional (2D) transition-metal monochalcogenides have been recently predicted to be potential photo(electro)catalysts for water splitting and photoelectrochemical (PEC) reactions. Differently from the most established InSe, GaSe, GeSe, and many other monochalcogenides, bulk GaS has a large band gap of ca. 2.5 eV, which increases up to more than 3.0 eV with decreasing its thickness due to quantum confinement effects. Therefore, 2D GaS fills the void between 2D small-band-gap semiconductors and insulators, resulting of interest for the realization of van der Waals type-I heterojunctions in photocatalysis, as well as the development of UV light-emitting diodes, quantum wells, and other optoelectronic devices. Based on theoretical calculations of the electronic structure of GaS as a function of layer number reported in the literature, we experimentally demonstrate, for the first time, the PEC properties of liquid-phase exfoliated GaS nanoflakes. Our results indicate that solution-processed 2D GaS-based PEC-type photodetectors outperform the corresponding solid-state photodetectors. In fact, the 2D morphology of the GaS flakes intrinsically minimizes the distance between the photogenerated charges and the surface area at which the redox reactions occur, limiting electron-hole recombination losses. The latter are instead deleterious for standard solid-state configurations. Consequently, PEC-type 2D GaS photodetectors display a relevant UV-selective photoresponse. In particular, they attain responsivities of 1.8 mA W-1 in 1 M H2SO4 (at 0.8 V vs reversible hydrogen electrode -RHE-), 4.6 mA W-1 in 1 M Na2SO4 (at 0.9 V vs RHE), and 6.8 mA W-1 in 1 M KOH (at 1.1 V vs RHE) under 275 nm illumination wavelength with an intensity of 1.3 mW cm-2.
△ Less
Submitted 19 October, 2021;
originally announced October 2021.
-
Graphene-Based Electrodes in a Vanadium Redox Flow Battery Produced by Rapid Low-Pressure Combined Gas Plasma Treatments
Authors:
Sebastiano Bellani,
Leyla Najafi,
Mirko Prato,
Reinier Oropesa-Nunez,
Beatriz Martin-Garcia,
Luca Gagliani,
Elisa Mantero,
Luigi Marasco,
Gabriele Bianca,
Marilena I. Zappia,
Cansunur Demirci,
Silvia Olivotto,
Giacomo Mariucci,
Vittorio Pellegrini,
Massimo Schiavetti,
Francesco Bonaccorso
Abstract:
The development of high-power density vanadium redox flow batteries (VRFBs) with high energy efficiencies (EEs) is crucial for the widespread dissemination of this energy storage technology. In this work, we report the production of novel hierarchical carbonaceous nanomaterials for VRFB electrodes with high catalytic activity toward the vanadium redox reactions (VO2+/VO2+ and V2+/V3+). The electro…
▽ More
The development of high-power density vanadium redox flow batteries (VRFBs) with high energy efficiencies (EEs) is crucial for the widespread dissemination of this energy storage technology. In this work, we report the production of novel hierarchical carbonaceous nanomaterials for VRFB electrodes with high catalytic activity toward the vanadium redox reactions (VO2+/VO2+ and V2+/V3+). The electrode materials are produced through a rapid (minute timescale) low-pressure combined gas plasma treatment of graphite felts (GFs) in an inductively coupled radio frequency reactor. By systematically studying the effects of either pure gases (O2 and N2) or their combination at different gas plasma pressures, the electrodes are optimized to reduce their kinetic polarization for the VRFB redox reactions. To further enhance the catalytic surface area of the electrodes, single-/few-layer graphene, produced by highly scalable wet-jet milling exfoliation of graphite, is incorporated into the GFs through an infiltration method in the presence of a polymeric binder. Depending on the thickness of the proton-exchange membrane (Nafion 115 or Nafion XL), our optimized VRFB configurations can efficiently operate within a wide range of charge/discharge current densities, exhibiting energy efficiencies up to 93.9%, 90.8%, 88.3%, 85.6%, 77.6%, and 69.5% at 25, 50, 75, 100, 200, and 300 mA cm-2, respectively. Our technology is cost-competitive when compared to commercial ones (additional electrode costs < 100 euro m-2) and shows EEs rivalling the record-high values reported for efficient systems to date. Our work remarks on the importance to study modified plasma conditions or plasma methods alternative to those reported previously (e.g., atmospheric plasmas) to improve further the electrode performances of the current VRFB systems.
△ Less
Submitted 19 October, 2021;
originally announced October 2021.
-
Scalable spray-coated graphene-based electrodes for high-power electrochemical double-layer capacitors operating over a wide range of temperature
Authors:
Mohammad Akbari Garakani,
Sebastiano Bellani,
Vittorio Pellegrini,
Reinier Oropesa-Nuñez,
Antonio Esau Del RioCastillo,
Sara Abouali,
Leyla Najafi,
Beatriz Martín-García,
Alberto Ansaldo,
Paolo Bondavalli,
Cansunur Demirci,
Valentino Romano,
Elisa Mantero,
Luigi Marasco,
Mirko Prato,
Gaetan Bracciale,
Francesco Bonaccorso
Abstract:
Advancements in electrochemical double-layer capacitor (EDLC) technology require the concomitant use of novel efficient electrode materials and viable electrode manufacturing methods. Cost-effectiveness, scalability and sustainability are key-drivers for fulfilling product development chain accepted by worldwide legislations. Herein, we report a scalable and sprayable "green" electrode material-ba…
▽ More
Advancements in electrochemical double-layer capacitor (EDLC) technology require the concomitant use of novel efficient electrode materials and viable electrode manufacturing methods. Cost-effectiveness, scalability and sustainability are key-drivers for fulfilling product development chain accepted by worldwide legislations. Herein, we report a scalable and sprayable "green" electrode material-based ink based on activated carbon and single-/few-layer graphene (SLG/FLG) flakes. We show that, contrary to commercial reduced graphene oxide, defect-free and flat SLG/FLG flakes reduce the friction of ions over the electrode films, while spray coating deposition of our ink maximises the electrolyte accessibility to the electrode surface area. Sprayed SLG/FLG flakes-based EDLCs display superior rate capability performance (e.g., specific energies of 31.5, 23.7 and 12.5 Wh kg-1 at specific powers of 150, 7500 and 30000 W kg-1, respectively) compared to both SLG/FLG flakes-free devices and commercial-like EDLCs produced by slurry-coating method. The use of SLG/FLG flakes enables our sprayed EDLCs to operate in a wide range of temperature (-40/+100°C) compatible with ionic liquid/organic solvent-based electrolytes, overcoming the specific power limits of AC-based EDLCs. A prototype EDLCs stack consisting of multiple large-area EDLCs, each one displaying a capacitance of 25 F, demonstrates the industrial potential of our technology.
△ Less
Submitted 14 October, 2020;
originally announced October 2020.
-
Flexible Graphene/Carbon Nanotube Electrochemical Double-Layer Capacitors with Ultrahigh Areal Performance
Authors:
Valentino Romano,
Beatriz Martin-Garcia,
Sebastiano Bellani,
Luigi Marasco,
Jaya Kumar Panda,
Reinier Oropesa-Nunez,
Leyla Najafi,
Antonio Esau Del Rio Castillo,
Mirko Prato,
Elisa Mantero,
Vittorio Pellegrini,
Giovanna D Angelo,
Francesco Bonaccorso
Abstract:
The fabrication of electrochemical double-layer capacitors (EDLCs) with high areal capacitance relies on the use of elevated mass loadings of highly porous active materials. Herein, we demonstrate a high-throughput manufacturing of graphene/nanotubes hybrid EDLCs. Wet-jet milling (WJM) method is exploited to exfoliate the graphite into single/few-layer graphene flakes (WJM-G) in industrial volume…
▽ More
The fabrication of electrochemical double-layer capacitors (EDLCs) with high areal capacitance relies on the use of elevated mass loadings of highly porous active materials. Herein, we demonstrate a high-throughput manufacturing of graphene/nanotubes hybrid EDLCs. Wet-jet milling (WJM) method is exploited to exfoliate the graphite into single/few-layer graphene flakes (WJM-G) in industrial volume (production rate ~0.5 kg/day). Commercial single/double walled carbon nanotubes (SDWCNTs) are mixed with graphene flakes in order to act as spacers between the graphene flakes during their film formation. The latter is obtained by one-step vacuum filtration, resulting in self-standing, metal- and binder-free flexible EDLC electrodes with high active material mass loadings up to 30 mg cm-2. The corresponding symmetric WJM-G/SDWCNTs EDLCs exhibit electrode energy densities of 539 uWh cm-2 at 1.3 mW cm-2 and operating power densities up to 532 mW cm-2 (outperforming most of the EDLC technologies). The EDCLs show excellent cycling stability and outstanding flexibility even under highly folded states (up to 180 degrees). The combination of industrial-like production of active materials, simplified manufacturing of EDLC electrodes, and ultrahigh areal performance of the as-produced EDLCs are promising for novel advanced EDLC designs.
△ Less
Submitted 11 April, 2020;
originally announced May 2020.
-
Extending the colloidal transition metal dichalcogenide library to ReS2 nanosheets for application in gas sensing and electrocatalysis
Authors:
Beatriz Martin-Garcia,
Davide Spirito,
Sebastiano Bellani,
Mirko Prato,
Valentino Romano,
Anatolii Polovitsyn,
Rosaria Brescia,
Reinier Oropesa-Nunez,
Leyla Najafi,
Alberto Ansaldo,
Giovanna D Angelo,
Vittorio Pellegrini,
Roman Krahne,
Iwan Moreels,
Francesco Bonaccorso
Abstract:
Among the large family of transition metal dichalcogenides (TMDCs), recently ReS2 has stood out due to its nearly layer-independent optoelectronic and physicochemical properties. These are related to its 1T distorted octahedral structure, which leads to strong in-plane anisotropy and the presence of active sites at its surface, which makes ReS2 interesting for applications such as gas sensors and…
▽ More
Among the large family of transition metal dichalcogenides (TMDCs), recently ReS2 has stood out due to its nearly layer-independent optoelectronic and physicochemical properties. These are related to its 1T distorted octahedral structure, which leads to strong in-plane anisotropy and the presence of active sites at its surface, which makes ReS2 interesting for applications such as gas sensors and catalysts for H2 production. However, the current fabrication methods for ReS2 use chemical or physical vapor deposition (CVD or PVD) processes that are costly and involve complex and lengthy fabrication procedures, therefore limiting their large-scale production and exploitation. To address this issue, we developed a colloidal synthesis approach, which allows the production of ReS2 to be attained at temperatures below 360 Celsius degrees and with reaction times < 2 h, resulting in a more cost-efficient strategy than the CVD and PVD methods. By combining the solution-based synthesis with surface functionalization strategies, we demonstrate the feasibility of colloidal ReS2 nanosheet films for gas sensing of different toxic gases, moisture and other volatile compounds with highly competitive performance in comparison with devices built with CVD-grown ReS2 and MoS2. In addition, the integration of the ReS2 nanosheet films in assemblies, in which they are deposited on top of networks of carbon nanotubes, allowed us to fabricate electrodes for electrocatalysis for H2 production in both acid and alkaline conditions. Results from proof-of-principle devices show an electrocatalytic overpotential that is competitive with devices based on ReS2 produced by CVD, and even with MoS2, WS2 and MoSe2 electrocatalysts.
△ Less
Submitted 11 April, 2020;
originally announced May 2020.
-
Solution-processed GaSe nanoflake-based films for photoelectrochemical water splitting and photoelectrochemical-type photodetectors
Authors:
Marilena Isabella Zappia,
Gabriele Bianca,
Sebastiano Bellani,
Michele Serri,
Leyla Najafi,
Reinier Oropesa-Nuñez,
Beatriz Martín-García,
Daniel Bouša,
David Sedmidubský,
Vittorio Pellegrini,
Zdeněk Sofer,
Anna Cupolillo,
Francesco Bonaccorso
Abstract:
Gallium selenide (GaSe) is a layered compound, which has been exploited in nonlinear optical applications and photodetectors due to its anisotropic structure and pseudo-direct optical gap. Theoretical studies predicted that its two-dimensional (2D) form is a potential photocatalyst for water splitting reactions. Herein, we first report the photoelectrochemical (PEC) characterization of GaSe nanofl…
▽ More
Gallium selenide (GaSe) is a layered compound, which has been exploited in nonlinear optical applications and photodetectors due to its anisotropic structure and pseudo-direct optical gap. Theoretical studies predicted that its two-dimensional (2D) form is a potential photocatalyst for water splitting reactions. Herein, we first report the photoelectrochemical (PEC) characterization of GaSe nanoflakes (single-/few-layer flakes), produced via liquid phase exfoliation, for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in both acidic and alkaline media. In 0.5 M H2SO4, the GaSe photoelectrodes display the best PEC performance, i.e. a ratiometric power-saved metric for HER (Φsaved,HER) of 0.09% and a ratiometric power-saved metric for OER (Φsaved,OER) of 0.25%. When used as PEC-type photodetectors, GaSe photoelectrodes show a responsivity of ~0.16 A W-1 upon 455 nm illumination at light intensity of 63.5 uW cm-2 and applied potential of -0.3 V vs. reversible hydrogen electrode (RHE). The stability analysis of the GaSe photodetectors evidences a durable operation over tens of cathodic linear sweep voltammetry scans in 0.5 M H2SO4 for HER. Viceversa, degradation effects have been observed in both alkaline and anodic operation due to highly oxidizing environment and O2-induced (photo-)oxidation effects. Our results provide new insight into PEC properties of GaSe nanoflakes for their exploitation in photoelectrocatalysis, PEC-type photodetectors and (bio)sensors.
△ Less
Submitted 21 April, 2020;
originally announced April 2020.
-
Octapod-shaped CdSe nanocrystals hosting Pt with high-mass activity for the hydrogen evolution reaction
Authors:
Leyla Najafi,
Sebastiano Bellani,
Andrea Castelli,
Milena P. Arciniegas,
Rosaria Brescia,
Reinier Oropesa-Nuñez,
Beatriz Martín-García,
Michele Serri,
Filippo Drago,
Liberato Manna,
Francesco Bonaccorso
Abstract:
The design of efficient electrocatalysts for electrochemical water splitting with minimal amount of precious metal is crucial to attain renewable and sustainable energy conversion. Here, we report the use of a network of CdSe branched colloidal nanocrystals, made of a CdSe core and eight CdSe pods (so-called octapods), able to host on their pods Pt particles, and thus catalyzing water splitting re…
▽ More
The design of efficient electrocatalysts for electrochemical water splitting with minimal amount of precious metal is crucial to attain renewable and sustainable energy conversion. Here, we report the use of a network of CdSe branched colloidal nanocrystals, made of a CdSe core and eight CdSe pods (so-called octapods), able to host on their pods Pt particles, and thus catalyzing water splitting reactions. Thanks to the octapod shape, the resulting Pt-hosting network is mechanically trapped onto carbon nanotube buckypaper, providing mechanically flexible and binder-free electrodes. We found that such hierarchical configuration maximizes the mass activity and the utilization efficiency of Pt for the hydrogen evolution reaction (HER). At a potential of -0.15 V vs. reversible hydrogen electrode, the Pt/octapod network-based electrodes display a Pt mass activity on the HER of 166 A mg-1 and 42 A mg-1 in acidic and alkaline media, respectively. These values correspond to turnover frequencies of 168 s-1 and 42 s-1, respectively, which are in that order 14 and 21 times higher compared to commercially available Pt/C benchmarks. The strong chemical and mechanical interactions between the Pt and the octapod surface, along with pod-aided adhesion of the Pt/octapod network to the buckypaper, result in a long-term durability (>20 h) of the HER-activity in both media. These results experimentally prove that the exploitation of our network of branched nanocrystals hosting Pt particles can circumvent the durability issues of the catalysts while adopting either ultralow Pt loadings or benchmarking carbon-supported Pt nanocrystals. Our work opens up prospects for using porous networks made by branched nanocrystals as catalysts with ultralow amount of noble metals and controlled catalytic properties.
△ Less
Submitted 17 March, 2020;
originally announced March 2020.
-
Niobium disulphide (NbS$_2$)-based (heterogeneous) electrocatalysts for an efficient hydrogen evolution reaction
Authors:
Leyla Najafi,
Sebastiano Bellani,
Reinier Oropesa-Nuñez,
Beatriz Martín-García,
Mirko Prato,
Vlastimil Mazánek,
Doriana Debellis,
Simone Lauciello,
Rosaria Brescia,
Zdeněk Sofer,
Francesco Bonaccorso
Abstract:
The design of efficient and cost-effective catalysts for the hydrogen evolution reaction (HER) is the key for molecular hydrogen (H2) production from electrochemical water splitting. Transition metal dichalcogenides (MX2), most notably group-6 MX2 (e.g., MoS2 and WS2), are appealing catalysts for the HER alternative to the best, but highly expensive, Pt-group elements. However, their HER activity…
▽ More
The design of efficient and cost-effective catalysts for the hydrogen evolution reaction (HER) is the key for molecular hydrogen (H2) production from electrochemical water splitting. Transition metal dichalcogenides (MX2), most notably group-6 MX2 (e.g., MoS2 and WS2), are appealing catalysts for the HER alternative to the best, but highly expensive, Pt-group elements. However, their HER activity is typically restricted to their edge sites rather than their basal plane. Furthermore, their semiconducting properties hinder an efficient electron transfer to the catalytic sites, which impedes a high rate of H2 production. Herein, we exploit liquid-phase exfoliation-produced metallic (1H, 2H and 3R) NbS2 nanoflakes, belonging to the class of metallic layered group-5 MX2, to overcome the abovementioned limitations. Both chemical treatment with hygroscopic Li salt and electrochemical in operando self-nanostructuring are exploited to improve the NbS2 nanoflake HER activity. The combination of NbS2 with other MX2, in our case MoSe2, also provides heterogeneous catalysts accelerating the HER kinetics of the individual counterparts. The designed NbS2-based catalysts exhibit an overpotential at a cathodic current of 10 mA cm-2 (n10) as low as 0.10 and 0.22 V vs. RHE in 0.5 M H2SO4 and 1 M KOH, respectively. In 0.5 M H2SO4, the HER activity of the NbS2-based catalysts is also superior to those of the Pt/C benchmark at current densities higher than 80 mA cm-2. Our work provides general guidelines for a scalable and cost-effective exploitation of NbS2, as well as the entire MX2 portfolio, for attaining a viable H2 production through electrochemical routes.
△ Less
Submitted 17 February, 2020;
originally announced March 2020.
-
Scalable production of graphene inks via wet-jet milling exfoliation for screen-printed micro-supercapacitors
Authors:
Sebastiano Bellani,
Elisa Petroni,
Antonio Esau Del Rio Castillo,
Nicola Curreli,
Beatriz Martin-Garcia,
Reinier Oropesa-Nunez,
Mirko Prato,
Francesco Bonaccorso
Abstract:
The miniaturization of energy storage units is pivotal for the development of next-generation portable electronic devices. Micro-supercapacitors (MSCs) hold a great potential to work as on-chip micro-power sources and energy storage units complementing batteries and energy harvester systems. The scalable production of supercapacitor materials with cost-effective and high-throughput processing meth…
▽ More
The miniaturization of energy storage units is pivotal for the development of next-generation portable electronic devices. Micro-supercapacitors (MSCs) hold a great potential to work as on-chip micro-power sources and energy storage units complementing batteries and energy harvester systems. The scalable production of supercapacitor materials with cost-effective and high-throughput processing methods is crucial for the widespread application of MSCs. Here, we report wet-jet milling exfoliation of graphite to scale-up the production of graphene as supercapacitor material. The formulation of aqueous/alcohol-based graphene inks allows metal-free, flexible MSCs to be screen-printed. These MSCs exhibit areal capacitance (Careal) values up to 1.324 mF cm-2 (5.296 mF cm-2 for a single electrode), corresponding to an outstanding volumetric capacitance (Cvol) of 0.490 F cm-3 (1.961 F cm-3 for a single electrode). The screen-printed MSCs can operate up to power density above 20 mW cm-2 at energy density of 0.064 uWh cm-2. The devices exhibit excellent cycling stability over charge-discharge cycling (10000 cycles), bending cycling (100 cycles at bending radius of 1 cm) and folding (up to angles of 180°). Moreover, ethylene vinyl acetate-encapsulated MSCs retain their electrochemical properties after a home-laundry cycle, providing waterproof and washable properties for prospective application in wearable electronics.
△ Less
Submitted 21 March, 2019;
originally announced March 2019.
-
MoS2 Quantum Dot/Graphene Hybrids for Advanced Interface Engineering of CH3NH3PbI3 Perovskite Solar Cell with Efficiency over 20%
Authors:
Leyla Najafi,
Babak Taheri,
Beatriz Martin-Garcia,
Sebastiano Bellani,
Diego Di Girolamo,
Antonio Agresti,
Reinier Oropesa-Nunez,
Sara Pescetelli,
Luigi Vesce,
Emanuele Calabro,
Mirko Prato,
Antonio E. Del Rio Castillo,
Aldo Di Carlo,
Francesco Bonaccorso
Abstract:
Interface engineering of organic-inorganic halide perovskite solar cells (PSCs) plays a pivotal role in achieving high power conversion efficiency (PCE). Graphene and related two-dimensional materials (GRMs) are promising candidates to tune on demand the interface properties of PSCs. In this work, we fully exploit the potential of GRMs by controlling the optoelectronic properties of hybrids betwee…
▽ More
Interface engineering of organic-inorganic halide perovskite solar cells (PSCs) plays a pivotal role in achieving high power conversion efficiency (PCE). Graphene and related two-dimensional materials (GRMs) are promising candidates to tune on demand the interface properties of PSCs. In this work, we fully exploit the potential of GRMs by controlling the optoelectronic properties of hybrids between molybdenum disulfide (MoS2) and reduced graphene oxide (RGO) as hole transport layer (HTL) and active buffer layer (ABL) in mesoscopic methylammonium lead iodide (CH3NH3PbI3) perovskite (MAPbI3)-based PSC. We show that zero-dimensional MoS2 quantum dots (MoS2 QDs), derived by liquid phase exfoliated MoS2 flakes, provide both hole-extraction and electron-blocking properties. In fact, on the one hand, intrinsic n-type doping-induced intra-band gap states effectively extract the holes through an electron injection mechanism. On the other hand, quantum confinement effects increase the optical band gap of MoS2 (from 1.4 eV for the flakes to > 3.2 for QDs), raising the minimum energy of its conduction band (from -4.3 eV for the flakes to -2.2 eV for QDs) above the one of conduction band of MAPbI3 (between -3.7 and -4 eV) and hindering electron collection. The van der Waals hybridization of MoS2 QDs with functionalized reduced graphene oxide (f-RGO), obtained by chemical silanization-induced linkage between RGO and (3-mercaptopropyl)trimethoxysilane, is effective to homogenize the deposition of HTLs or ABLs onto the perovskite film, since the two-dimensional (2D) nature of RGO effectively plug the pinholes of the MoS2 QDs films. Our graphene interface engineering (GIE) strategy based on van der Waals MoS2 QD/graphene hybrids enable MAPbI3-based PSCs to achieve PCE up to 20.12% (average PCE of 18.8%).
△ Less
Submitted 21 March, 2019;
originally announced March 2019.
