-
Statistical Mechanics of the Kompaneets Equation
Authors:
Guilherme Eduardo Freire Oliveira
Abstract:
As an important subject in non-equilibrium Statistical Mechanics, we study in this thesis the relaxation to equilibrium of a photon gas in contact with an non-relativistic and non-degenerate electron bath. Photons and electrons interact via the Compton effect, establishing thermal equilibrium of radiation with matter as pointed out by A.S. Kompaneets in 1957. The evolution of the photon distributi…
▽ More
As an important subject in non-equilibrium Statistical Mechanics, we study in this thesis the relaxation to equilibrium of a photon gas in contact with an non-relativistic and non-degenerate electron bath. Photons and electrons interact via the Compton effect, establishing thermal equilibrium of radiation with matter as pointed out by A.S. Kompaneets in 1957. The evolution of the photon distribution function is then described by the eponymous partial differential equation, here viewed as the diffusion approximation to the relativistic Boltzmann equation that describes the system. Being one of the few examples where this diffusion approximation can be performed in great detail, yielding the Bose-Einstein distribution as stationary solution, the Kompaneets equation also provides the description of the so-called Sunyaev-Zeldovich effect, which is the change of apparent brightness of the cosmic microwave background (CMB) radiation. There are many ways of deriving this equation, but one of them, which was proposed by Kompaneets in 1957 stands out for its directness and simplicity. However, we point out in this work that there are some inconsistencies regarding this traditional derivation that were repeated by all the references we could find that follow the original framework of 1957. This thesis is divided in two parts: in the first we will be interested in how to deal with these inconsistencies, building the necessary basis in which the diffusion approximation to the Boltzmann equation is consistently performed. In the second part, we will be interested in possible extensions and beyond reviewing some existing extensions, we will also show that a new setup involving a master equation of a random walk with suitable chosen transition rates in the photon reciprocal space furnishes not only Kompaneets equation but also a first generalization to a system of bosons under a possible driving.
△ Less
Submitted 15 July, 2021;
originally announced July 2021.
-
A Reactive Molecular Dynamics Study of Hydrogenation on Diamond Surfaces
Authors:
Eliezer F. Oliveira,
Mahesh R. Neupane,
Chenxi Li,
Harikishan Kannan,
Xiang Zhang,
Anand B. Puthirath,
Pankaj B. Shah,
A. Glen Birdwell,
Tony G. Ivanov,
Robert Vajtai,
Douglas S. Galvao,
Pulickel M. Ajayan
Abstract:
Hydrogenated diamond has been regarded as a promising material in electronic device applications, especially in field-effect transistors (FETs). However, the quality of diamond hydrogenation has not yet been established, nor has the specific orientation that would provide the optimum hydrogen coverage. In addition, most theoretical work in the literature use models with 100% hydrogenated diamond s…
▽ More
Hydrogenated diamond has been regarded as a promising material in electronic device applications, especially in field-effect transistors (FETs). However, the quality of diamond hydrogenation has not yet been established, nor has the specific orientation that would provide the optimum hydrogen coverage. In addition, most theoretical work in the literature use models with 100% hydrogenated diamond surfaces to study electronic properties, which is far from the experimentally observed hydrogen coverage. In this work, we have carried out a detailed study using fully atomistic reactive molecular dynamics (MD) simulations on low indices diamond surfaces i.e. (001), (013), (110), (113) and (111) to evaluate the quality and hydrogenation thresholds on different diamond surfaces and their possible effects on electronic properties. Our simulation results indicate that the 100% surface hydrogenation in these surfaces is hard to achieve because of the steric repulsion between the terminated hydrogen atoms. Among all the considered surfaces, the (001), (110), and (113) surfaces incorporate a larger number of hydrogen atoms and passivate the surface dangling bonds. Our results on hydrogen stability also suggest that these surfaces with optimum hydrogen coverage are robust under extreme conditions and could provide homogeneous p-type surface conductivity in the diamond surfaces, a key requirement for high-field, high-frequency device applications.
△ Less
Submitted 25 May, 2021;
originally announced May 2021.
-
Apparent Ferromagnetism in Exfoliated Ultra-thin Pyrite Sheets
Authors:
Anand B. Puthirath,
Aravind Puthirath Balan,
Eliezer F. Oliveira,
Vishnu Sreepal,
Francisco C. Robles Hernandez,
Guanhui Gao,
Nithya Chakingal,
Lucas M. Sassi,
Prasankumar Thibeorchews,
Gelu Costin,
Robert Vajtai,
Douglas S. Galvao,
Rahul R. Nair,
Pulickel M. Ajayan
Abstract:
Experimental evidence for ferromagnetic ordering in isotropic atomically thin two-dimensional crystals has been missing until a bilayer Cr2Ge2Te6, and a three-atom thick monolayer CrI3 are shown to retain ferromagnetic ordering at finite temperatures. Here, we demonstrate successful isolation of a non-van der Waals type ultra-thin nanosheet of FeS2 derived from naturally occurring pyrite mineral (…
▽ More
Experimental evidence for ferromagnetic ordering in isotropic atomically thin two-dimensional crystals has been missing until a bilayer Cr2Ge2Te6, and a three-atom thick monolayer CrI3 are shown to retain ferromagnetic ordering at finite temperatures. Here, we demonstrate successful isolation of a non-van der Waals type ultra-thin nanosheet of FeS2 derived from naturally occurring pyrite mineral (FeS2) by means of liquid-phase exfoliation. Structural characterizations imply that (111) oriented sheets are predominant and is supported theoretically by means of density functional theory surface energy calculations. Spin-polarized density theory calculations further predicted that (111) oriented three-atom thick pyrite sheet has a stable ferromagnetic ground state different from its diamagnetic bulk counterpart. This theoretical finding is evaluated experimentally employing low temperature superconducting quantum interference device measurements and observed an anomalous ferromagnetic kind of behavior.
△ Less
Submitted 28 August, 2021; v1 submitted 6 October, 2020;
originally announced October 2020.
-
Zeolite-inspired 3d printed structures with enhanced mechanical properties
Authors:
Rushikesh S. Ambekar,
Eliezer F. Oliveira,
Brijesh Kushwaha,
Leonardo D. Machado,
Mohammad Sajadi,
Ray H. Baughman,
Pulickel M. Ajayan,
Ajit K. Roy,
Douglas S. Galvao,
Chandra S. Tiwary
Abstract:
Specific strength (strength/density) is a crucial factor while designing high load bearing architecture in areas of aerospace and defence. Strength of the material can be enhanced by blending with high strength component or, by compositing with high strength fillers but both the options has limitations such as at certain load, materials fail due to poor filler and matrix interactions. Therefore, r…
▽ More
Specific strength (strength/density) is a crucial factor while designing high load bearing architecture in areas of aerospace and defence. Strength of the material can be enhanced by blending with high strength component or, by compositing with high strength fillers but both the options has limitations such as at certain load, materials fail due to poor filler and matrix interactions. Therefore, researchers are interested in enhancing strength of materials by playing with topology/geometry and therefore nature is best option to mimic for structures whereas, complexity limits nature mimicked structures. In this paper, we have explored Zeolite-inspired structures for load bearing capacity. Zeolite-inspired structure were obtained from molecular dynamics simulation and then fabricated via Fused deposition Modeling. The atomic scale complex topology from simulation is experimentally synthesized using 3D printing. Compressibility of as-fabricated structures was tested in different direction and compared with simulation results. Such complex architecture can be used for ultralight aerospace and automotive parts.
△ Less
Submitted 12 February, 2020; v1 submitted 2 February, 2020;
originally announced February 2020.
-
Mechanical Properties of Protomene: A Molecular Dynamics Investigation
Authors:
Eliezer F. Oliveira,
Pedro A. S. Autreto,
Cristiano F. Woellner,
Douglas S. Galvao
Abstract:
Recently, a new class of carbon allotrope called protomene was proposed. This new structure is composed of sp2 and sp3 carbon-bonds. Topologically, protomene can be considered as an sp3 carbon structure (~80% of this bond type) doped by sp2 carbons. First-principles simulations have shown that protomene presents an electronic bandgap of ~3.4 eV. However, up to now, its mechanical properties have n…
▽ More
Recently, a new class of carbon allotrope called protomene was proposed. This new structure is composed of sp2 and sp3 carbon-bonds. Topologically, protomene can be considered as an sp3 carbon structure (~80% of this bond type) doped by sp2 carbons. First-principles simulations have shown that protomene presents an electronic bandgap of ~3.4 eV. However, up to now, its mechanical properties have not been investigated. In this work, we have investigated protomene mechanical behavior under tensile strain through fully atomistic reactive molecular dynamics simulations using the ReaxFF force field, as available in the LAMMPS code. At room temperature, our results show that the protomene is very stable and the obtained ultimate strength and ultimate stress indicates an anisotropic behavior. The highest ultimate strength was obtained for the x-direction, with a value of ~110 GPa. As for the ultimate strain, the highest one was for the z-direction (~25% of strain) before protomene mechanical fracture.
△ Less
Submitted 23 October, 2018;
originally announced October 2018.
-
Silver Hardening via Hypersonic Impacts
Authors:
Eliezer Fernando Oliveira,
Pedro Alves da Silva Autreto,
Douglas Soares Galvao
Abstract:
The search for new ultra strong materials has been a very active research area. With relation to metals, a successful way to improve their strength is by the creation of a gradient of nanograins (GNG) inside the material. Recently, R. Thevamaran et al. [Science v354, 312-316 (2016)] propose a single step method based on high velocity impact of silver nanocubes to produce high-quality GNG. This met…
▽ More
The search for new ultra strong materials has been a very active research area. With relation to metals, a successful way to improve their strength is by the creation of a gradient of nanograins (GNG) inside the material. Recently, R. Thevamaran et al. [Science v354, 312-316 (2016)] propose a single step method based on high velocity impact of silver nanocubes to produce high-quality GNG. This method consists of producing high impact collisions of silver cubes at hypersonic velocity (~400 m/s) against a rigid wall. Although they observed an improvement in the mechanical properties of the silver after the impact, the GNG creation and the strengthening mechanism at nanoscale remain unclear. In order to gain further insights about these mechanisms, we carried out fully atomistic molecular dynamics simulations (MD) to investigate the atomic conformations/rearrangements during and after high impact collisions of silver nanocubes at ultrasonic velocity. Our results indicate the co-existence of polycrystalline arrangements after the impact formed by core HCP domains surrounded by FCC ones, which could also contribute to explain the structural hardening.
△ Less
Submitted 15 January, 2018;
originally announced January 2018.
