Showing 1–10 of 10 results for author: Okkels, F

A Viscoelastic Catastrophe

Authors: Kristian Ejlebjerg Jensen, Peter Szabo, Fridolin Okkels

Abstract: We use a differential constitutive equation to model the flow of a viscoelastic flow in a cross-slot geometry, which is known to exhibit bistability above a critical flow rate. The novelty lies in two asymmetric modifications to the geometry, which causes a change in the bifurcation diagram such that one of the stable solutions becomes disconnected from the solution at low flow speeds. First we sh… ▽ More We use a differential constitutive equation to model the flow of a viscoelastic flow in a cross-slot geometry, which is known to exhibit bistability above a critical flow rate. The novelty lies in two asymmetric modifications to the geometry, which causes a change in the bifurcation diagram such that one of the stable solutions becomes disconnected from the solution at low flow speeds. First we show that it is possible to mirror one of the modifications such that the system can be forced to the disconnected solution. Then we show that a slow decrease of the flow rate, can cause the system to go through a drastic change on a short time scale, also known as a catastrophe. The short time scale could lead to a precise and simple experimental measurement of the flow conditions at which the viscoelastic catastrophe occurs. Since the phenomena is intrinsically related to the extensional rheology of the fluid, we propose to exploit the phenomena for in-line extensional rheometry. △ Less

Submitted 9 February, 2018; originally announced February 2018.

Implementation of the Log-Conformation Formulation for Two-Dimensional Viscoelastic Flow

Authors: K. E. Jensen, P. Szabo, F. Okkels

Abstract: We have implemented the log-conformation method for two-dimensional viscoelastic flow in COMSOL, a commercial high-level finite element package. The code is verified for an Oldroyd-B fluid flowing past a confined cylinder. We are also able to describe the well-known bistability of the viscoelastic flow in a cross-slot geometry for a FENE-CR fluid, and we describe the changes required for performin… ▽ More We have implemented the log-conformation method for two-dimensional viscoelastic flow in COMSOL, a commercial high-level finite element package. The code is verified for an Oldroyd-B fluid flowing past a confined cylinder. We are also able to describe the well-known bistability of the viscoelastic flow in a cross-slot geometry for a FENE-CR fluid, and we describe the changes required for performing simulations with the Phan-Thien-Tanner (PTT), Giesekus and FENE-P models. Finally, we calculate the flow of a FENE-CR fluid in a geometry with three in- and outlets. The implementation is included in the supplementary material, and we hope that it can inspire new as well as experienced researchers in the field of differential constitutive equations for viscoelastic flow. △ Less

Submitted 20 April, 2016; v1 submitted 5 August, 2015; originally announced August 2015.

Optimal homogenization of perfusion flows in microfluidic bio-reactors; a numerical study

Authors: Fridolin Okkels, Martin Dufva, Henrik Bruus

Abstract: To ensure homogeneous conditions within the complete area of perfused microfluidic bio-reactors, we develop a general design of a continuously feed bio-reactor with uniform perfusion flow. This is achieved by introducing a specific type of perfusion inlet to the reaction area. The geometry of these inlets are found using the methods of topology optimization and shape optimization. The results ar… ▽ More To ensure homogeneous conditions within the complete area of perfused microfluidic bio-reactors, we develop a general design of a continuously feed bio-reactor with uniform perfusion flow. This is achieved by introducing a specific type of perfusion inlet to the reaction area. The geometry of these inlets are found using the methods of topology optimization and shape optimization. The results are compared with two different analytic models, from which a general parametric description of the design is obtained and tested numerically. Such a parametric description will generally be beneficial for the design of a broad range of microfluidic bioreactors used for e.g. cell culturing and analysis, and in feeding bio-arrays. △ Less

Submitted 19 May, 2009; originally announced May 2009.

Comments: 15 pages, 8 figures

Topology and shape optimization of induced-charge electro-osmotic micropumps

Authors: Misha Marie Gregersen, Fridolin Okkels, Martin Z. Bazant, Henrik Bruus

Abstract: For a dielectric solid surrounded by an electrolyte and positioned inside an externally biased parallel-plate capacitor, we study numerically how the resulting induced-charge electro-osmotic (ICEO) flow depends on the topology and shape of the dielectric solid. In particular, we extend existing conventional electrokinetic models with an artificial design field to describe the transition from the… ▽ More For a dielectric solid surrounded by an electrolyte and positioned inside an externally biased parallel-plate capacitor, we study numerically how the resulting induced-charge electro-osmotic (ICEO) flow depends on the topology and shape of the dielectric solid. In particular, we extend existing conventional electrokinetic models with an artificial design field to describe the transition from the liquid electrolyte to the solid dielectric. Using this design field, we have succeeded in applying the method of topology optimization to find system geometries with non-trivial topologies that maximize the net induced electro-osmotic flow rate through the electrolytic capacitor in the direction parallel to the capacitor plates. Once found, the performance of the topology optimized geometries has been validated by transferring them to conventional electrokinetic models not relying on the artificial design field. Our results show the importance of the topology and shape of the dielectric solid in ICEO systems and point to new designs of ICEO micropumps with significantly improved performance. △ Less

Submitted 13 January, 2009; originally announced January 2009.

Comments: 18 pages, latex IOP-style, 7 eps figures

Journal ref: New Journal of Physics 11 (2009) 075019

Mass and charge transport in micro and nano-fluidic channels

Authors: N. A. Mortensen, L. H. Olesen, F. Okkels, H. Bruus

Abstract: We consider laminar flow of incompressible electrolytes in long, straight channels driven by pressure and electro-osmosis. We use a Hilbert space eigenfunction expansion to address the general problem of an arbitrary cross section and obtain general results in linear-response theory for the mass and charge transport coefficients which satisfy Onsager relations. In the limit of non-overlapping De… ▽ More We consider laminar flow of incompressible electrolytes in long, straight channels driven by pressure and electro-osmosis. We use a Hilbert space eigenfunction expansion to address the general problem of an arbitrary cross section and obtain general results in linear-response theory for the mass and charge transport coefficients which satisfy Onsager relations. In the limit of non-overlapping Debye layers the transport coefficients are simply expressed in terms of parameters of the electrolyte as well as the hydraulic radius R=2A/P with A and P being the cross-sectional area and perimeter, respectively. In articular, we consider the limits of thin non-overlapping as well as strongly overlapping Debye layers, respectively, and calculate the corrections to the hydraulic resistance due to electro-hydrodynamic interactions. △ Less

Submitted 28 November, 2006; originally announced November 2006.

Comments: Invited paper presented at the Second International Conference on Transport Phenomena in Micro and Nanodevices, Il Ciocco Hotel and Conference Center, Barga, Italy, 11-15 June 2006. Accepted for publication in a special issue of Nanoscale and Microscale Thermophysical Engineering (Taylor & Francis)

Journal ref: Nanoscale Microscale Thermophys. Eng. 11, 57 (2007).

Scaling behavior of optimally structured catalytic microfluidic reactors

Authors: Fridolin Okkels, Henrik Bruus

Abstract: In this study of catalytic microfluidic reactors we show that, when optimally structured, these reactors share underlying scaling properties. The scaling is predicted theoretically and verified numerically. Furthermore, we show how to increase the reaction rate significantly by distributing the active porous material within the reactor using a high-level implementation of topology optimization. In this study of catalytic microfluidic reactors we show that, when optimally structured, these reactors share underlying scaling properties. The scaling is predicted theoretically and verified numerically. Furthermore, we show how to increase the reaction rate significantly by distributing the active porous material within the reactor using a high-level implementation of topology optimization. △ Less

Submitted 2 August, 2006; originally announced August 2006.

Comments: 4 pages, 5 eps figures

Journal ref: Phys. Rev. E 75, 016301 (2007)

Universality in edge-source diffusion dynamics

Authors: N. A. Mortensen, F. Okkels, H. Bruus

Abstract: We show that in edge-source diffusion dynamics the integrated concentration N(t) has a universal dependence with a characteristic time-scale tau=(A/P)^2 pi/(4D), where D is the diffusion constant while A and P are the cross-sectional area and perimeter of the domain, respectively. For the short-time dynamics we find a universal square-root asymptotic dependence N(t)=N0 sqrt(t/tau) while in the l… ▽ More We show that in edge-source diffusion dynamics the integrated concentration N(t) has a universal dependence with a characteristic time-scale tau=(A/P)^2 pi/(4D), where D is the diffusion constant while A and P are the cross-sectional area and perimeter of the domain, respectively. For the short-time dynamics we find a universal square-root asymptotic dependence N(t)=N0 sqrt(t/tau) while in the long-time dynamics N(t) saturates exponentially at N0. The exponential saturation is a general feature while the associated coefficients are weakly geometry dependent. △ Less

Submitted 22 December, 2005; v1 submitted 24 October, 2005; originally announced October 2005.

Comments: 4 pages including 4 figures. Minor changes. Accepted for PRE

Journal ref: Phys. Rev. E 73, 012101 (2006).

Reexamination of Hagen-Poiseuille flow: shape-dependence of the hydraulic resistance in microchannels

Authors: Niels Asger Mortensen, Fridolin Okkels, Henrik Bruus

Abstract: We consider pressure-driven, steady state Poiseuille flow in straight channels with various cross-sectional shapes: elliptic, rectangular, triangular, and harmonic-perturbed circles. A given shape is characterized by its perimeter P and area A which are combined into the dimensionless compactness number C = P^2/A, while the hydraulic resistance is characterized by the well-known dimensionless ge… ▽ More We consider pressure-driven, steady state Poiseuille flow in straight channels with various cross-sectional shapes: elliptic, rectangular, triangular, and harmonic-perturbed circles. A given shape is characterized by its perimeter P and area A which are combined into the dimensionless compactness number C = P^2/A, while the hydraulic resistance is characterized by the well-known dimensionless geometrical correction factor alpha. We find that alpha depends linearly on C, which points out C as a single dimensionless measure characterizing flow properties as well as the strength and effectiveness of surface-related phenomena central to lab-on-a-chip applications. This measure also provides a simple way to evaluate the hydraulic resistance for the various shapes. △ Less

Submitted 4 May, 2005; v1 submitted 2 December, 2004; originally announced December 2004.

Comments: 4 pages including 3 figures. Revised title, as published

Journal ref: Phys. Rev. E 71, 057301 (2005)

A high-level programming-language implementation of topology optimization applied to steady-state Navier-Stokes flow

Authors: Laurits H. Olesen, Fridolin Okkels, Henrik Bruus

Abstract: We present a versatile high-level programming-language implementation of nonlinear topology optimization. Our implementation is based on the commercial software package Femlab, and it allows a wide range of optimization objectives to be dealt with easily. We exemplify our method by studies of steady-state Navier-Stokes flow problems, thus extending the work by Borrvall and Petersson on topology… ▽ More We present a versatile high-level programming-language implementation of nonlinear topology optimization. Our implementation is based on the commercial software package Femlab, and it allows a wide range of optimization objectives to be dealt with easily. We exemplify our method by studies of steady-state Navier-Stokes flow problems, thus extending the work by Borrvall and Petersson on topology optimization of fluids in Stokes flow [Int. J. Num. Meth. Fluids 2003; 41:77--107]. We analyze the physical aspects of the solutions and how they are affected by different parameters of the optimization algorithm. A complete example of our implementation is included as Femlab code in an appendix. △ Less

Submitted 1 February, 2006; v1 submitted 13 October, 2004; originally announced October 2004.

Comments: RevTex 4, 19 pages including 10 figures

Journal ref: Int. J. Numer. Meth. Engng., Vol. 65(7), 975 - 1001 (2006)

Reaction-diffusion dynamics: confrontation between theory and experiment in a microfluidic reactor

Authors: Charles N. Baroud, Fridolin Okkels, Laure Menetrier, Patrick Tabeling

Abstract: We confront, quantitatively, the theoretical description of the reaction-diffusion of a second order reaction to experiment. The reaction at work is \ca/CaGreen, and the reactor is a T-shaped microchannel, 10 $μ$m deep, 200 $μ$m wide, and 2 cm long. The experimental measurements are compared with the two-dimensional numerical simulation of the reaction-diffusion equations. We find good agreement… ▽ More We confront, quantitatively, the theoretical description of the reaction-diffusion of a second order reaction to experiment. The reaction at work is \ca/CaGreen, and the reactor is a T-shaped microchannel, 10 $μ$m deep, 200 $μ$m wide, and 2 cm long. The experimental measurements are compared with the two-dimensional numerical simulation of the reaction-diffusion equations. We find good agreement between theory and experiment. From this study, one may propose a method of measurement of various quantities, such as the kinetic rate of the reaction, in conditions yet inaccessible to conventional methods. △ Less

Submitted 7 July, 2003; v1 submitted 27 August, 2002; originally announced August 2002.

Journal ref: Phys. Rev. E, v. 63, pp.060104(R), 2003