-
Low-loss Sb$_2$S$_3$ Optical Phase Shifter Enabled by Optimizing Sputtering Conditions
Authors:
Yuto Miyatake,
Tomohiro Anda,
Yosuke Wakita,
Kotaro Makino,
Shogo Hatayama,
Makoto Okano,
Kasidit Toprasertpong,
Shinichi Takagi,
Mitsuru Takenaka
Abstract:
By quantitatively evaluating the atomic concentrations of sputtered Sb$_2$S$_3$ films with different sputtering powers and Ar flows, we reveal that a sputtered Sb$_2$S$_3$ film becomes close to the stoichiometric composition as the sputtering power and Ar flow decrease. We characterize the optical properties of Sb$_2$S$_3$ and show that the lower sputtering power leads to a better figure of merit…
▽ More
By quantitatively evaluating the atomic concentrations of sputtered Sb$_2$S$_3$ films with different sputtering powers and Ar flows, we reveal that a sputtered Sb$_2$S$_3$ film becomes close to the stoichiometric composition as the sputtering power and Ar flow decrease. We characterize the optical properties of Sb$_2$S$_3$ and show that the lower sputtering power leads to a better figure of merit of Sb$_2$S$_3$ as an optical phase shifter in the near infrared (NIR) range. Based on these results, we achieve a loss per phase shift of 0.33 dB/$π$ at a wavelength of 1.55 $μ$m, one of the lowest losses among Sb$_2$S$_3$ phase shifters in the NIR range.
△ Less
Submitted 18 May, 2025; v1 submitted 15 May, 2025;
originally announced May 2025.
-
Deterministic Integration of hBN Single-Photon Emitters on SiN Waveguides via Femtosecond Laser Processing
Authors:
Daiki Yamashita,
Masaki Yumoto,
Aiko Narazaki,
Makoto Okano
Abstract:
We demonstrate a post-fabrication method that deterministically integrates hexagonal boron nitride (hBN) single-photon emitters (SPEs) onto silicon nitride (SiN) waveguides. Mechanically exfoliated hBN flakes are dry-transferred onto pre-fabricated SiN waveguides, and localized femtosecond laser irradiation is employed to induce defects with sub-microscale spatial precision. Confocal photoluminesc…
▽ More
We demonstrate a post-fabrication method that deterministically integrates hexagonal boron nitride (hBN) single-photon emitters (SPEs) onto silicon nitride (SiN) waveguides. Mechanically exfoliated hBN flakes are dry-transferred onto pre-fabricated SiN waveguides, and localized femtosecond laser irradiation is employed to induce defects with sub-microscale spatial precision. Confocal photoluminescence mapping reveals multiple laser-written bright defects, among which one emitter exhibits narrow spectral linewidth and polarization dependence characteristic of a dipole emitter. The emitter exhibits high brightness and temporal stability, and second-order photon correlation measurements confirm its single-photon nature. Furthermore, we successfully achieve on-chip excitation via the SiN waveguide, demonstrating the compatibility of our approach with mature photonic platform technologies. This deterministic integration technique offers a scalable pathway for incorporating quantum emitters into photonic circuits, paving the way for the development of quantum information processing and communication systems with two-dimensional material hybrid photonic devices.
△ Less
Submitted 28 April, 2025;
originally announced April 2025.
-
Scalable intensity-based photonic matrix-vector multiplication processor using single-wavelength time-division-multiplexed signals
Authors:
Chengli Chai,
Rui Tang,
Makoto Okano,
Kasidit Toprasertpong,
Shinichi Takagi,
Mitsuru Takenaka
Abstract:
Photonic integrated circuits provide a compact platform for ultrafast and energy-efficient matrix-vector multiplications (MVMs) in the optical domain. Recently, schemes based on time-division multiplexing (TDM) have been proposed as scalable approaches for realizing large-scale photonic MVM processors. However, existing demonstrations rely on coherent detection or multiple wavelengths, both of whi…
▽ More
Photonic integrated circuits provide a compact platform for ultrafast and energy-efficient matrix-vector multiplications (MVMs) in the optical domain. Recently, schemes based on time-division multiplexing (TDM) have been proposed as scalable approaches for realizing large-scale photonic MVM processors. However, existing demonstrations rely on coherent detection or multiple wavelengths, both of which complicate their operations. In this work, we demonstrate a scalable TDM-based photonic MVM processor that uses only single-wavelength intensity-modulated optical signals, thereby avoiding coherent detection and enabling simplified operations. A 32-channel processor is fabricated on a Si-on-insulator (SOI) platform and used to experimentally perform convolution operations in a convolutional neural network (CNN) for handwritten digit recognition, achieving a classification accuracy of 93.47% for 1500 images.
△ Less
Submitted 8 February, 2025; v1 submitted 30 January, 2025;
originally announced January 2025.
-
Waveguide-multiplexed photonic matrix-vector multiplication processor using multiport photodetectors
Authors:
Rui Tang,
Makoto Okano,
Chao Zhang,
Kasidit Toprasertpong,
Shinichi Takagi,
Mitsuru Takenaka
Abstract:
The slowing down of Moore's law has driven the development of application-specific processors for deep learning. Analog photonic processors offer a promising solution for accelerating matrix-vector multiplications (MVMs) in deep learning by leveraging parallel computations in the optical domain. Intensity-based photonic MVM processors, which do not utilize the phase information of light, are appea…
▽ More
The slowing down of Moore's law has driven the development of application-specific processors for deep learning. Analog photonic processors offer a promising solution for accelerating matrix-vector multiplications (MVMs) in deep learning by leveraging parallel computations in the optical domain. Intensity-based photonic MVM processors, which do not utilize the phase information of light, are appealing due to their simplified operations. However, existing intensity-based schemes for such processors often employ wavelength multiplexing or mode multiplexing, both of which have limited scalability due to high insertion loss or wavelength crosstalk. In this work, we present a scalable intensity-based photonic MVM processor based on the concept of waveguide multiplexing. This scheme employs multiport photodetectors (PDs) to sum the intensities of multiple optical signals, eliminating the need for multiple wavelengths or modes. A 16-port Ge PD with a 3 dB bandwidth of 11.8 GHz at a bias voltage of -3 V is demonstrated, and it can be further scaled up to handle 250 ports while maintaining a 6.1 GHz operation bandwidth. A 4 $\times$ 4 circuit fabricated on a Si-on-insulator (SOI) platform is used to perform MVMs in a 3-layer neural network designed for classifying Iris flowers, achieving a classification accuracy of 93.3%. Furthermore, the performance of large-scale circuits in a convolutional neural network (CNN) for Fashion-MNIST is simulated, resulting in a classification accuracy of 90.53%. This work provides a simplified and scalable approach to photonic MVM, laying a foundation for large-scale and multi-dimensional photonic matrix-matrix multiplication in optical neural networks.
△ Less
Submitted 5 November, 2024; v1 submitted 8 October, 2024;
originally announced October 2024.
-
Symmetric silicon microring resonator optical crossbar array for accelerated inference and training in deep learning
Authors:
Rui Tang,
Shuhei Ohno,
Ken Tanizawa,
Kazuhiro Ikeda,
Makoto Okano,
Kasidit Toprasertpong,
Shinichi Takagi,
Mitsuru Takenaka
Abstract:
Photonic integrated circuits are emerging as a promising platform for accelerating matrix multiplications in deep learning, leveraging the inherent parallel nature of light. Although various schemes have been proposed and demonstrated to realize such photonic matrix accelerators, the in-situ training of artificial neural networks using photonic accelerators remains challenging due to the difficult…
▽ More
Photonic integrated circuits are emerging as a promising platform for accelerating matrix multiplications in deep learning, leveraging the inherent parallel nature of light. Although various schemes have been proposed and demonstrated to realize such photonic matrix accelerators, the in-situ training of artificial neural networks using photonic accelerators remains challenging due to the difficulty of direct on-chip backpropagation on a photonic chip. In this work, we propose a silicon microring resonator (MRR) optical crossbar array with a symmetric structure that allows for simple on-chip backpropagation, potentially enabling the acceleration of both the inference and training phases of deep learning. We demonstrate a $4 \times 4$ circuit on a Si-on-insulator (SOI) platform and use it to perform inference tasks of a simple neural network for classifying Iris flowers, achieving a classification accuracy of 93.3%. Subsequently, we train the neural network using simulated on-chip backpropagation and achieve an accuracy of 91.1% in the same inference task after training. Furthermore, we simulate a convolutional neural network (CNN) for handwritten digit recognition, using a $9 \times 9$ MRR crossbar array to perform the convolution operations. This work contributes to the realization of compact and energy-efficient photonic accelerators for deep learning.
△ Less
Submitted 1 June, 2024; v1 submitted 29 January, 2024;
originally announced January 2024.
-
Valley photonic crystal waveguides fabricated with CMOS-compatible process
Authors:
Takuto Yamaguchi,
Hironobu Yoshimi,
Miyoshi Seki,
Minoru Ohtsuka,
Nobuyuki Yokoyama,
Yasutomo Ota,
Makoto Okano,
Satoshi Iwamoto
Abstract:
Valley photonic crystal (VPhC) waveguides have attracted much attention because of their ability to enable robust light propagation against sharp bends. However, their demonstration using a complementary metal-oxide-semiconductor (CMOS)-compatible process suitable for mass production has not yet been reported at the telecom wavelengths. Here, by tailoring the photomask to suppress the optical prox…
▽ More
Valley photonic crystal (VPhC) waveguides have attracted much attention because of their ability to enable robust light propagation against sharp bends. However, their demonstration using a complementary metal-oxide-semiconductor (CMOS)-compatible process suitable for mass production has not yet been reported at the telecom wavelengths. Here, by tailoring the photomask to suppress the optical proximity effect, VPhC patterns comprising equilateral triangular holes were successfully fabricated using photolithography. We optically characterized the fabricated VPhC devices using microscopic optics with near-infrared imaging. For comparison, we also fabricated and characterized line-defect W1 PhC waveguides, in which the transmission intensities decreased at some regions within the operating bandwidth when sharp turns were introduced into the waveguide. In contrast, the developed VPhC waveguides can robustly propagate light around the C-band telecommunication wavelengths, even in the presence of sharp bends. Our results highlight the potential of VPhC waveguides as an interconnection technology in silicon topological photonic integrated circuits.
△ Less
Submitted 12 May, 2023;
originally announced May 2023.
-
A two-color dual-comb system for time-resolved measurements of ultrafast magnetization dynamics using triggerless asynchronous optical sampling
Authors:
Daichi Nishikawa,
Kazuki Maezawa,
Shun Fujii,
Makoto Okano,
Shinichi Watanabe
Abstract:
We report on an Er-doped fiber (EDF)-laser-based dual-comb system that allows us to perform triggerless asynchronous optical sampling (ASOPS) pump-probe measurements of ultrafast demagnetization and spin precession in magnetic materials. Because the oscillation frequencies of the two frequency-comb light sources are highly stabilized, the pulse-to-pulse timing jitter is sufficiently suppressed and…
▽ More
We report on an Er-doped fiber (EDF)-laser-based dual-comb system that allows us to perform triggerless asynchronous optical sampling (ASOPS) pump-probe measurements of ultrafast demagnetization and spin precession in magnetic materials. Because the oscillation frequencies of the two frequency-comb light sources are highly stabilized, the pulse-to-pulse timing jitter is sufficiently suppressed and data accumulation without any trigger signals is possible. To effectively induce spin precession in ferromagnetic thin films, the spectral bandwidth of the output of one of the EDF frequency comb sources is broadened by a highly nonlinear fiber and then amplified at a wavelength of about 1030 nm by a Yb-doped fiber amplifier. The output of the other frequency comb source is converted to about 775 nm by second harmonic generation. We used this system to observe the ultrafast demagnetization and spin precession dynamics on the picosecond and nanosecond time scales in a permalloy thin film. This time-domain spectroscopy system is promising for the rapid characterization of spin-wave generation and propagation dynamics in magnetic materials.
△ Less
Submitted 7 April, 2023;
originally announced April 2023.
-
Triggerless data acquisition in asynchronous optical-sampling terahertz time-domain spectroscopy based on dual-comb system
Authors:
Makoto Okano,
Shinichi Watanabe
Abstract:
By using two mutually phase-locked optical frequency combs with slightly different repetition rates, we demonstrate asynchronous optical-sampling terahertz time-domain spectroscopy (ASOPS THz-TDS) without using any trigger signals or optical delay lines. Due to a tight stabilization of the repetition frequencies, it was possible to accumulate the data over 48 minutes in a triggerless manner withou…
▽ More
By using two mutually phase-locked optical frequency combs with slightly different repetition rates, we demonstrate asynchronous optical-sampling terahertz time-domain spectroscopy (ASOPS THz-TDS) without using any trigger signals or optical delay lines. Due to a tight stabilization of the repetition frequencies, it was possible to accumulate the data over 48 minutes in a triggerless manner without signal degradation. The fractional frequency stability of the measured terahertz signal is evaluated to be $\sim$8.0$\times$10$^{- 17}$ after 730 s. The frequency accuracy of the obtained terahertz spectrum is ensured by phase-locking the two frequency combs to a frequency standard. To clarify the performance of our system, we characterized the absorption line of water vapor around 0.557 THz. The good agreement of the measured center frequency and linewidth with the values predicted from the HITRAN database verifies the suitability of our ASOPS THz-TDS system for precise measurements.
△ Less
Submitted 1 August, 2022;
originally announced August 2022.
-
Polarization-sensitive terahertz time-domain spectroscopy system without mechanical moving parts
Authors:
Mayuri Nakagawa,
Makoto Okano,
Shinichi Watanabe
Abstract:
We report on the measurement of terahertz electric-field vector waveforms by using a system that contains no mechanical moving parts. It is known that two phase-locked femtosecond lasers with different repetition rates can be used to perform time-domain spectroscopy without using a mechanical delay stage. Furthermore, an electro-optic modulator can be used to perform polarization measurements with…
▽ More
We report on the measurement of terahertz electric-field vector waveforms by using a system that contains no mechanical moving parts. It is known that two phase-locked femtosecond lasers with different repetition rates can be used to perform time-domain spectroscopy without using a mechanical delay stage. Furthermore, an electro-optic modulator can be used to perform polarization measurements without rotating any polarizers or waveplates. We experimentally demonstrate the combination of these two methods and explain the analysis of data obtained by such a system. Such a system provides a robust platform that can promote the usage of polarization-sensitive terahertz time-domain spectroscopy in basic science and practical applications. For the experimental demonstration, we alter the polarization of a terahertz wave by a polarizer.
△ Less
Submitted 2 May, 2022;
originally announced May 2022.
-
Temporal-offset dual-comb vibrometer with picometer axial precision
Authors:
A. Iwasaki,
D. Nishikawa,
M. Okano,
S. Tateno,
K. Yamanoi,
Y. Nozaki,
S. Watanabe
Abstract:
We demonstrate a dual-comb vibrometer where the pulses of one frequency-comb are split into pulse pairs. We introduce a delay between the two pulses of each pulse pair in front of the sample, and after the corresponding two consecutive reflections at the vibrating sample surface, the initially introduced delay is cancelled by a modified Sagnac geometry. The remaining phase difference between the t…
▽ More
We demonstrate a dual-comb vibrometer where the pulses of one frequency-comb are split into pulse pairs. We introduce a delay between the two pulses of each pulse pair in front of the sample, and after the corresponding two consecutive reflections at the vibrating sample surface, the initially introduced delay is cancelled by a modified Sagnac geometry. The remaining phase difference between the two pulses corresponds to the change in the axial position of the surface during the two consecutive reflections. The Sagnac geometry reduces the effect of phase jitter since both pulses propagate through nearly the same optical path (in opposite directions), and spurious signals are eliminated by time gating. We determine the amplitude of a surface vibration on a surface-acoustic-wave device with an axial precision of 4 pm. This technique enables highly accurate determination of extremely small displacements.
△ Less
Submitted 19 March, 2022;
originally announced March 2022.
-
Flood Inflow Forecast Using L2-norm Ensemble Weighting Sea Surface Feature
Authors:
Takato Yasuno,
Masazumi Amakata,
Junichiro Fujii,
Masahiro Okano,
Riku Ogata
Abstract:
It is important to forecast dam inflow for flood damage mitigation. The hydrograph provides critical information such as the start time, peak level, and volume. Particularly, dam management requires a 6-h lead time of the dam inflow forecast based on a future hydrograph. The authors propose novel target inflow weights to create an ocean feature vector extracted from the analyzed images of the sea…
▽ More
It is important to forecast dam inflow for flood damage mitigation. The hydrograph provides critical information such as the start time, peak level, and volume. Particularly, dam management requires a 6-h lead time of the dam inflow forecast based on a future hydrograph. The authors propose novel target inflow weights to create an ocean feature vector extracted from the analyzed images of the sea surface. We extracted 4,096 elements of the dimension vector in the fc6 layer of the pre-trained VGG16 network. Subsequently, we reduced it to three dimensions of t-SNE. Furthermore, we created the principal component of the sea temperature weights using PCA. We found that these weights contribute to the stability of predictor importance by numerical experiments. As base regression models, we calibrate the least squares with kernel expansion, the quantile random forest minimized out-of bag error, and the support vector regression with a polynomial kernel. When we compute the predictor importance, we visualize the stability of each variable importance introduced by our proposed weights, compared with other results without weights. We apply our method to a dam at Kanto region in Japan and focus on the trained term from 2007 to 2018, with a limited flood term from June to October. We test the accuracy over the 2019 flood term. Finally, we present the applied results and further statistical learning for unknown flood forecast.
△ Less
Submitted 20 July, 2022; v1 submitted 6 December, 2021;
originally announced December 2021.
-
Ultra-precise determination of thicknesses and refractive indices of optically thick dispersive materials by dual-comb spectroscopy
Authors:
Kana A. Sumihara,
Sho Okubo,
Makoto Okano,
Hajime Inaba,
Shinichi Watanabe
Abstract:
Precise measurements of the geometrical thickness of a sample and its refractive index are important for materials science, engineering, and medical diagnosis. Among the possible non-contact evaluation methods, optical interferometric techniques possess the potential of providing superior resolution. However, in the optical frequency region, the ambiguity in the absolute phase-shift makes it diffi…
▽ More
Precise measurements of the geometrical thickness of a sample and its refractive index are important for materials science, engineering, and medical diagnosis. Among the possible non-contact evaluation methods, optical interferometric techniques possess the potential of providing superior resolution. However, in the optical frequency region, the ambiguity in the absolute phase-shift makes it difficult to measure these parameters of optically thick dispersive materials with sufficient resolution. Here, we demonstrate that dual frequency-comb spectroscopy can be used to precisely determine the absolute sample-induced phase-shift by analyzing the data smoothness. This method enables simultaneous determination of the geometrical thickness and the refractive index of a planar sample with a precision of five and a half digits and an ultra-wide dynamic range. The thickness and the refractive index at 193.414 THz of a silicon wafer determined by this method are 0.52047(3) mm and 3.4756(3), respectively, without any prior knowledge of the refractive index.
△ Less
Submitted 16 March, 2022; v1 submitted 30 August, 2021;
originally announced August 2021.
-
Swept Source Lidar: simultaneous FMCW ranging and nonmechanical beam steering with a wideband swept source
Authors:
Masayuki Okano,
Changho Chong
Abstract:
Light detection and ranging (lidar) has long been used in various applications. Solid-state beam steering mechanisms are needed for robust lidar systems. Here we propose and demonstrate a lidar scheme called "Swept Source Lidar" that allows us to perform frequency-modulated continuous-wave (FMCW) ranging and nonmechanical beam steering simultaneously. Wavelength dispersive elements provide angular…
▽ More
Light detection and ranging (lidar) has long been used in various applications. Solid-state beam steering mechanisms are needed for robust lidar systems. Here we propose and demonstrate a lidar scheme called "Swept Source Lidar" that allows us to perform frequency-modulated continuous-wave (FMCW) ranging and nonmechanical beam steering simultaneously. Wavelength dispersive elements provide angular beam steering, while a laser frequency is continuously swept by a wideband swept source over its whole tuning bandwidth. Employing a tunable vertical-cavity surface-emitting laser and a 1-axis mechanical beam scanner, three-dimensional point cloud data has been obtained. Swept Source Lidar systems can be flexibly combined with various beam steering elements to realize full solid-state FMCW lidar systems.
△ Less
Submitted 31 July, 2020;
originally announced August 2020.
-
Spatial Coherence of a Strongly Interacting Bose Gas in the Trimerized Kagome Lattice
Authors:
Thomas H. Barter,
Tsz-Him Leung,
Masayuki Okano,
Maxwell Block,
Norman Y. Yao,
Dan M. Stamper-Kurn
Abstract:
We produce a trimerized kagome lattice for ultracold atoms using an optical superlattice formed by overlaying triangular lattices generated with two colors of light at a 2:1 wavelength ratio. Adjusting the depth of each lattice tunes the strong intra-trimer (J) and weak inter-trimer (J') tunneling energies, and also the on-site interaction energy U. Two different trimerization patterns are disting…
▽ More
We produce a trimerized kagome lattice for ultracold atoms using an optical superlattice formed by overlaying triangular lattices generated with two colors of light at a 2:1 wavelength ratio. Adjusting the depth of each lattice tunes the strong intra-trimer (J) and weak inter-trimer (J') tunneling energies, and also the on-site interaction energy U. Two different trimerization patterns are distinguished using matter-wave diffraction. We characterize the coherence of a strongly interacting Bose gas in this lattice, observing persistent nearest-neighbor spatial coherence in the large U/J' limit, and that such coherence displays asymmetry between the strongly and the weakly coupled bonds.
△ Less
Submitted 27 June, 2019;
originally announced June 2019.
-
Mean-field scaling of the superfluid to Mott insulator transition in a 2D optical superlattice
Authors:
Claire K. Thomas,
Thomas H. Barter,
Tsz-Him Leung,
Masayuki Okano,
Gyu-Boong Jo,
Jennie Guzman,
Itamar Kimchi,
Ashvin Vishwanath,
Dan M. Stamper-Kurn
Abstract:
The mean-field treatment of the Bose-Hubbard model predicts properties of lattice-trapped gases to be insensitive to the specific lattice geometry once system energies are scaled by the lattice coordination number $z$. We test this scaling directly by comparing coherence properties of $^{87}$Rb gases that are driven across the superfluid to Mott insulator transition within optical lattices of eith…
▽ More
The mean-field treatment of the Bose-Hubbard model predicts properties of lattice-trapped gases to be insensitive to the specific lattice geometry once system energies are scaled by the lattice coordination number $z$. We test this scaling directly by comparing coherence properties of $^{87}$Rb gases that are driven across the superfluid to Mott insulator transition within optical lattices of either the kagome ($z=4$) or the triangular ($z=6$) geometries. The coherent fraction measured for atoms in the kagome lattice is lower than for those in a triangular lattice with the same interaction and tunneling energies. A comparison of measurements from both lattices agrees quantitatively with the scaling prediction. We also study the response of the gas to a change in lattice geometry, and observe the dynamics as a strongly interacting kagome-lattice gas is suddenly "hole-doped" by introducing the additional sites of the triangular lattice.
△ Less
Submitted 2 July, 2017; v1 submitted 14 February, 2017;
originally announced February 2017.
-
0.54 μm resolution two-photon interference with dispersion cancellation for quantum optical coherence tomography
Authors:
Masayuki Okano,
Hwan Hong Lim,
Ryo Okamoto,
Norihiko Nishizawa,
Sunao Kurimura,
Shigeki Takeuchi
Abstract:
Quantum information technologies harness the intrinsic nature of quantum theory to beat the limitations of the classical methods for information processing and communication. Recently, the application of quantum features to metrology has attracted much attention. Quantum optical coherence tomography (QOCT), which utilizes two-photon interference between entangled photon pairs, is a promising appro…
▽ More
Quantum information technologies harness the intrinsic nature of quantum theory to beat the limitations of the classical methods for information processing and communication. Recently, the application of quantum features to metrology has attracted much attention. Quantum optical coherence tomography (QOCT), which utilizes two-photon interference between entangled photon pairs, is a promising approach to overcome the problem with optical coherence tomography (OCT): As the resolution of OCT becomes higher, degradation of the resolution due to dispersion within the medium becomes more critical. Here we report on the realization of 0.54 $μ$m resolution two-photon interference, which surpasses the current record resolution 0.75 $μ$m of low-coherence interference for OCT. In addition, the resolution for QOCT showed almost no change against the dispersion of a 1 mm thickness of water inserted in the optical path, whereas the resolution for OCT dramatically degrades. For this experiment, a highly-efficient chirped quasi-phase-matched lithium tantalate device was developed using a novel $`$nano-electrode-poling$'$ technique. The results presented here represent a breakthrough for the realization of quantum protocols, including QOCT, quantum clock synchronization, and more. Our work will open up possibilities for medical and biological applications.
△ Less
Submitted 7 January, 2016;
originally announced January 2016.
-
Dispersion cancellation in high resolution two-photon interference
Authors:
Masayuki Okano,
Ryo Okamoto,
Akira Tanaka,
Shutaro Ishida,
Norihiko Nishizawa,
Shigeki Takeuchi
Abstract:
The dispersion cancellation observed in Hong-Ou-Mandel (HOM) interference between frequency-entangled photon pairs has been the basis of quantum optical coherence tomography and quantum clock synchronization. Here we explore the effect of phase dispersion on ultranarrow HOM dips. We show that the higher-order dispersion, the line width of the pump laser, and the spectral shape of the parametric fl…
▽ More
The dispersion cancellation observed in Hong-Ou-Mandel (HOM) interference between frequency-entangled photon pairs has been the basis of quantum optical coherence tomography and quantum clock synchronization. Here we explore the effect of phase dispersion on ultranarrow HOM dips. We show that the higher-order dispersion, the line width of the pump laser, and the spectral shape of the parametric fluorescence have a strong effect on the dispersion cancellation in the high-resolution regime with several experimental verifications. Perfect dispersion cancellation with a linewidth of 3μm is also demonstrated through 25 mm of water.
△ Less
Submitted 22 October, 2013;
originally announced October 2013.
-
Hardening and termination of long-duration gamma rays detected prior to lightning
Authors:
H. Tsuchiya,
T. Enoto,
K. Iwata,
S. Yamada,
T. Yuasa,
T. Kitaguchi,
M. Kawaharada,
K. Nakazawa,
M. Kokubun,
H. Kato,
M. Okano,
T. Tamagawa,
K. Makishima
Abstract:
We report the first observation of 3$-$30 MeV prolonged gamma-ray emission that was abruptly terminated by lightning. The gamma-ray detection was made during winter thunderstorms on December 30, 2010 by the Gamma-Ray Observation of Winter THunderclouds (GROWTH) experiment carried out in a coastal area along the Sea of Japan. The gamma-ray flux lasted for less than 3 min, continuously hardening clo…
▽ More
We report the first observation of 3$-$30 MeV prolonged gamma-ray emission that was abruptly terminated by lightning. The gamma-ray detection was made during winter thunderstorms on December 30, 2010 by the Gamma-Ray Observation of Winter THunderclouds (GROWTH) experiment carried out in a coastal area along the Sea of Japan. The gamma-ray flux lasted for less than 3 min, continuously hardening closer to the lightning occurrence. The hardening at energies of 3$-$10 MeV energies was most prominent. The gamma-ray flux abruptly ceased less than 800 ms before the lightning flash that occurred over 5 km away from the experimental site. In addition, we observed a clear difference in the duration of the 3$-$10 MeV gamma rays and those $>$10 MeV, suggesting that the area of $>$10 MeV gamma-ray emission is considerably smaller than that of the lower-energy gamma rays. This work may give a manifestation that a local region emitting prolonged gamma rays connects with a distant region to initiate lightning.
△ Less
Submitted 10 June, 2013;
originally announced June 2013.
-
Noncollinear parametric fluorescence by chirped quasi-phase matching for monocycle temporal entanglement
Authors:
Akira Tanaka,
Ryo Okamoto,
Hwan Hong Lim,
Shanthi Subashchandran,
Masayuki Okano,
Labao Zhang,
Lin Kang,
Jian Chen,
Peiheng Wu,
Toru Hirohata,
Sunao Kurimura,
Shigeki Takeuchi
Abstract:
Quantum entanglement of two photons created by spontaneous parametric downconversion (SPDC) can be used to probe quantum optical phenomena during a single cycle of light. Harris [Phys. Rev. Lett. 98, 063602 (2007)] suggested using ultrabroad parametric fluorescence generated from a quasi-phase-matched (QPM) device whose poling period is chirped. In the Harris\' s original proposal, it is assumed t…
▽ More
Quantum entanglement of two photons created by spontaneous parametric downconversion (SPDC) can be used to probe quantum optical phenomena during a single cycle of light. Harris [Phys. Rev. Lett. 98, 063602 (2007)] suggested using ultrabroad parametric fluorescence generated from a quasi-phase-matched (QPM) device whose poling period is chirped. In the Harris\' s original proposal, it is assumed that the photons are collinearly generated and then spatially separated by frequency filtering. Here, we alternatively propose using noncollinearly generated SPDC. In our numerical calculation, to achieve 1.2 cycle temporal correlation for a 532 nm pump laser, only 10% -chirped device is sufficient when noncollinear condition is applied, while a largely chirped (50%) device is required in collinear condition. We also experimentally demonstrate an octave-spanning (790-1610 nm) noncollinear parametric fluorescence from a 10% chirped MgSLT crystal using both a superconducting nanowire single-photon detector and photomultiplier tube as photon detectors. The observed SPDC bandwidth is 194 THz, which is the largest width achieved to date for a chirped QPM device. From this experimental result, our numerical analysis predicts that the bi-photon can be compressed to 1.2 cycles with appropriate phase compensation.
△ Less
Submitted 23 October, 2012;
originally announced October 2012.
-
Generation of broadband spontaneous parametric fluorescence using multiple bulk nonlinear crystals
Authors:
Masayuki Okano,
Ryo Okamoto,
Akira Tanaka,
Shanthi Subashchandran,
Shigeki Takeuchi
Abstract:
We propose a novel method for generating broadband spontaneous parametric fluorescence by using a set of bulk nonlinear crystals (NLCs). We also demonstrate this scheme experimentally. Our method employs a superposition of spontaneous parametric fluorescence spectra generated using multiple bulk NLCs. A typical bandwidth of 160 nm (73 THz) with a degenerate wavelength of 808 nm was achieved using…
▽ More
We propose a novel method for generating broadband spontaneous parametric fluorescence by using a set of bulk nonlinear crystals (NLCs). We also demonstrate this scheme experimentally. Our method employs a superposition of spontaneous parametric fluorescence spectra generated using multiple bulk NLCs. A typical bandwidth of 160 nm (73 THz) with a degenerate wavelength of 808 nm was achieved using two beta-barium-borate (BBO) crystals, whereas a typical bandwidth of 75 nm (34 THz) was realized using a single BBO crystal. We also observed coincidence counts of generated photon pairs in a non-collinear configuration. The bandwidth could be further broadened by increasing the number of NLCs. Our demonstration suggests that a set of four BBO crystals could realize a bandwidth of approximately 215 nm (100 THz).We also discuss the stability of Hong-Ou-Mandel two-photon interference between the parametric fluorescence generated by this scheme. Our simple scheme is easy to implement with conventional NLCs and does not require special devices.
△ Less
Submitted 10 July, 2012;
originally announced July 2012.
-
Long-duration gamma-ray emissions from 2007 and 2008 winter thunderstorms
Authors:
H. Tsuchiya,
T. Enoto,
S. Yamada,
T. Yuasa,
K. Nakazawa,
T. Kitaguchi,
M. Kawaharada,
M. Kokubun,
H. Kato,
M. Okano,
K. Makishima
Abstract:
The Gamma-Ray Observation of Winter THunderclouds (GROWTH) experiment, consisting of two radiation-detection subsystems, has been operating since 2006 on the premises of Kashiwazaki-Kariwa nuclear power plant located at the coastal area of Japan Sea. By 2010 February, GROWTH detected 7 long-duration $γ$-rays emissions associated with winter thunderstorms. Of them, two events, obtained on 2007 Dece…
▽ More
The Gamma-Ray Observation of Winter THunderclouds (GROWTH) experiment, consisting of two radiation-detection subsystems, has been operating since 2006 on the premises of Kashiwazaki-Kariwa nuclear power plant located at the coastal area of Japan Sea. By 2010 February, GROWTH detected 7 long-duration $γ$-rays emissions associated with winter thunderstorms. Of them, two events, obtained on 2007 December 13 and 2008 December 25, are reported.On both occasions, all inorganic scintillators (NaI, CsI, and BGO) of the two subsystems detected significant gamma-ray signals lasting for >1 minute. Neither of these two events were associated with any lightning. In both cases, the gamma-ray energy spectra extend to 10 MeV, suggesting that the detected gamma-rays are produced by relativistic electrons via bremsstrahlung. Assuming that the initial photon spectrum at the source is expressed by a power-law function,the observed photons can be interpreted as being radiated from a source located at a distance of 290-560 m for the 2007 event and 110-690 m for the 2008 one, both at 90% confidence level.Employing these photon spectra, the number of relativistic electrons is estimated as 10^9 - 10^{11}. The estimation generally agrees with those calculated based on the relativistic runaway electron avalanche model. A GROWTH photon spectrum, summed over 3 individual events including the present two events and another reported previously, has similar features including a cut-off energy, to an averaged spectrum of terrestrial gamma-ray flashes.
△ Less
Submitted 19 February, 2011;
originally announced February 2011.
-
Simultaneous magneto-optical trapping of lithium and ytterbium atoms towards production of ultracold polar molecules
Authors:
M. Okano,
H. Hara,
M. Muramatsu,
K. Doi,
S. Uetake,
Y. Takasu,
Y. Takahashi
Abstract:
We have successfully implemented the first simultaneous magneto-optical trapping (MOT) of lithium ($^6$Li) and ytterbium ($^{174}$Yb) atoms, towards production of ultracold polar molecules of LiYb. For this purpose, we developed the dual atomic oven which contains both atomic species as an atom source and successfully observed the spectra of the Li and Yb atoms in the atomic beams from the dual…
▽ More
We have successfully implemented the first simultaneous magneto-optical trapping (MOT) of lithium ($^6$Li) and ytterbium ($^{174}$Yb) atoms, towards production of ultracold polar molecules of LiYb. For this purpose, we developed the dual atomic oven which contains both atomic species as an atom source and successfully observed the spectra of the Li and Yb atoms in the atomic beams from the dual atomic oven. We constructed the vacuum chamber including the glass cell with the windows made of zinc selenium (ZnSe) for the CO$_2$ lasers, which are the useful light sources of optical trapping for evaporative and sympathetic cooling. Typical atom numbers and temperatures in the compressed MOT are 7$\times10^3$ atoms, 640 $μ$K for $^6$Li, 7$\times10^4$ atoms and 60 $μ$K for $^{174}$Yb, respectively.
△ Less
Submitted 14 August, 2009;
originally announced August 2009.
-
Observation of an energetic radiation burst from mountain-top thunderclouds
Authors:
H. Tsuchiya,
T. Enoto,
T. Torii,
K. Nakazawa,
T. Yuasa,
S. Torii,
T. Fukuyama,
T. Yamaguchi,
H. Kato,
M. Okano,
M. Takita,
K. Makishima
Abstract:
During thunderstorms on 2008 September 20, a simultaneous detection of gamma rays and electrons was made at a mountain observatory in Japan located 2770 m above sea level. Both emissions, lasting 90 seconds, were associated with thunderclouds rather than lightning. The photon spectrum, extending to 10 MeV, can be interpreted as consisting of bremsstrahlung gamma rays arriving from a source which…
▽ More
During thunderstorms on 2008 September 20, a simultaneous detection of gamma rays and electrons was made at a mountain observatory in Japan located 2770 m above sea level. Both emissions, lasting 90 seconds, were associated with thunderclouds rather than lightning. The photon spectrum, extending to 10 MeV, can be interpreted as consisting of bremsstrahlung gamma rays arriving from a source which is 60 - 130 m in distance at 90% confidence level. The observed electrons are likely to be dominated by a primary population escaping from an acceleration region in the clouds.
△ Less
Submitted 3 June, 2009;
originally announced June 2009.
-
Detection of high-energy gamma rays from winter thunderclouds
Authors:
H. Tsuchiya,
T. Enoto,
S. Yamada,
T. Yuasa,
M. Kawaharada,
T. Kitaguchi,
M. Kokubun,
H. Kato,
M. Okano,
S. Nakamura,
K. Makishima
Abstract:
A report is made on a comprehensive observation of a burst-like $γ$-ray emission from thunderclouds on the Sea of Japan, during strong thunderstorms on 2007 January 6. The detected emission, lasting for $\sim$40 seconds, preceded cloud-to-ground lightning discharges. The burst spectrum, extending to 10 MeV, can be interpreted as consisting of bremsstrahlung photons originating from relativistic…
▽ More
A report is made on a comprehensive observation of a burst-like $γ$-ray emission from thunderclouds on the Sea of Japan, during strong thunderstorms on 2007 January 6. The detected emission, lasting for $\sim$40 seconds, preceded cloud-to-ground lightning discharges. The burst spectrum, extending to 10 MeV, can be interpreted as consisting of bremsstrahlung photons originating from relativistic electrons. This ground-based observation provides first clear evidence that strong electric fields in thunderclouds can continuously accelerate electrons beyond 10 MeV prior to lightning discharges.
△ Less
Submitted 21 August, 2007;
originally announced August 2007.
