Showing 1–7 of 7 results for author: Oishi, M

Commissioning of a compact multibend achromat lattice: A new 3 GeV synchrotron radiation facility

Authors: Shuhei Obara, Kota Ueshima, Takao Asaka, Yuji Hosaka, Koichi Kan, Nobuyuki Nishimori, Toshitaka Aoki, Hiroyuki Asano, Koichi Haga, Yuto Iba, Akira Ihara, Katsumasa Ito, Taiki Iwashita, Masaya Kadowaki, Rento Kanahama, Hajime Kobayashi, Hideki Kobayashi, Hideo Nishihara, Masaaki Nishikawa, Haruhiko Oikawa, Ryota Saida, Keisuke Sakuraba, Kento Sugimoto, Masahiro Suzuki, Kouki Takahashi , et al. (57 additional authors not shown)

Abstract: NanoTerasu, a new 3 GeV synchrotron light source in Japan, began user operation in April 2024. It provides high-brilliance soft to tender X-rays and covers a wide spectral range from ultraviolet to tender X-rays. Its compact storage ring with a circumference of 349 m is based on a four-bend achromat lattice to provide two straight sections in each cell for insertion devices with a natural horizont… ▽ More NanoTerasu, a new 3 GeV synchrotron light source in Japan, began user operation in April 2024. It provides high-brilliance soft to tender X-rays and covers a wide spectral range from ultraviolet to tender X-rays. Its compact storage ring with a circumference of 349 m is based on a four-bend achromat lattice to provide two straight sections in each cell for insertion devices with a natural horizontal emittance of 1.14 nm rad, which is small enough for soft X-rays users. The NanoTerasu accelerator incorporates several innovative technologies, including a full-energy injector C-band linear accelerator with a length of 110 m, an in-vacuum off-axis injection system, a four-bend achromat with B-Q combined bending magnets, and a TM020 mode accelerating cavity with built-in higher-order-mode dampers in the storage ring. This paper presents the accelerator machine commissioning over a half-year period and our model-consistent ring optics correction. The first user operation with a stored beam current of 160 mA is also reported. We summarize the storage ring parameters obtained from the commissioning. This is helpful for estimating the effective optical properties of synchrotron radiation at NanoTerasu. △ Less

Submitted 11 July, 2024; originally announced July 2024.

Comments: 30 pages, 24 figures, submitted to the journal

Machine Learning in Viscoelastic Fluids via Energy-Based Kernel Embedding

Authors: Samuel E. Otto, Cassio M. Oishi, Fabio Amaral, Steven L. Brunton, J. Nathan Kutz

Abstract: The ability to measure differences in collected data is of fundamental importance for quantitative science and machine learning, motivating the establishment of metrics grounded in physical principles. In this study, we focus on the development of such metrics for viscoelastic fluid flows governed by a large class of linear and nonlinear stress models. To do this, we introduce a kernel function co… ▽ More The ability to measure differences in collected data is of fundamental importance for quantitative science and machine learning, motivating the establishment of metrics grounded in physical principles. In this study, we focus on the development of such metrics for viscoelastic fluid flows governed by a large class of linear and nonlinear stress models. To do this, we introduce a kernel function corresponding to a given viscoelastic stress model that implicitly embeds flowfield snapshots into a Reproducing Kernel Hilbert Space (RKHS) whose squared norm equals the total mechanical energy. Working implicitly with lifted representations in the RKHS via the kernel function provides natural and unambiguous metrics for distances and angles between flowfields without the need for hyperparameter tuning. Additionally, we present a solution to the preimage problem for our kernels, enabling accurate reconstruction of flowfields from their RKHS representations. Through numerical experiments on an unsteady viscoelastic lid-driven cavity flow, we demonstrate the utility of our kernels for extracting energetically-dominant coherent structures in viscoelastic flows across a range of Reynolds and Weissenberg numbers. Specifically, the features extracted by Kernel Principal Component Analysis (KPCA) of flowfield snapshots using our kernel functions yield reconstructions with superior accuracy in terms of mechanical energy compared to conventional methods such as ordinary Principal Component Analysis (PCA) with naïvely-defined state vectors or KPCA with ad-hoc choices of kernel functions. Our findings underscore the importance of principled choices of metrics in both scientific and machine learning investigations of complex fluid systems. △ Less

Submitted 28 August, 2024; v1 submitted 22 April, 2024; originally announced April 2024.

Comments: 33 pages, 10 figures, Revised version of the publication

Journal ref: Journal of Computational Physics, Volume 516, 2024, 113371.

Predicting Energy Budgets in Droplet Dynamics: A Recurrent Neural Network Approach

Authors: Diego A. de Aguiar, Hugo L. França, Cassio M. Oishi

Abstract: Neural networks in fluid mechanics offer an efficient approach for exploring complex flows, including multiphase and free surface flows. The recurrent neural network, particularly the Long Short-Term Memory (LSTM) model, proves attractive for learning mappings from transient inputs to dynamic outputs. This study applies LSTM to predict transient and static outputs for fluid flows under surface ten… ▽ More Neural networks in fluid mechanics offer an efficient approach for exploring complex flows, including multiphase and free surface flows. The recurrent neural network, particularly the Long Short-Term Memory (LSTM) model, proves attractive for learning mappings from transient inputs to dynamic outputs. This study applies LSTM to predict transient and static outputs for fluid flows under surface tension effects. Specifically, we explore two distinct droplet dynamic scenarios: droplets with diverse initial shapes impacting with solid surfaces, as well as the coalescence of two droplets following collision. Using only dimensionless numbers and geometric time series data from numerical simulations, LSTM predicts the energy budget. The marker-and-cell front-tracking methodology combined with a marker-and-cell finite-difference strategy is adopted for simulating the droplet dynamics. Using a recurrent neural network (RNN) architecture fed with time series data derived from geometrical parameters, as for example droplet diameter variation, our study shows the accuracy of our approach in predicting energy budgets, as for instance the kinetic, dissipation, and surface energy trends, across a range of Reynolds and Weber numbers in droplet dynamic problems. Finally, a two-phase sequential neural network using only geometric data, which is readily available in experimental settings, is employed to predict the energies and then use them to estimate static parameters, such as the Reynolds and Weber numbers. While our methodology has been primarily validated with simulation data, its adaptability to experimental datasets is a promising avenue for future exploration. We hope that our strategy can be useful for diverse applications, spanning from inkjet printing to combustion engines, where the prediction of energy budgets or dissipation energies is crucial. △ Less

Submitted 18 January, 2025; v1 submitted 24 March, 2024; originally announced March 2024.

Effect of large-angle incidence on particle identification performance for light-charged ($Z \le 2$) particles by pulse shape analysis with a pad-type nTD silicon detector

Authors: Shoichiro Kawase, Takuya Murota, Hiroya Fukuda, Masaya Oishi, Teppei Kawata, Kentaro Kitafuji, Seiya Manabe, Yukinobu Watanabe, Hiroki Nishibata, Shintaro Go, Tamito Kai, Yuto Nagata, Taiga Muto, Yuichi Ishibashi, Megumi Niikura, Daisuke Suzuki, Teiichiro Matsuzaki, Katsuhiko Ishida, Rurie Mizuno, Noritaka Kitamura

Abstract: In recent years, particle discrimination methods based on digital waveform analysis techniques for neutron-transmutation-doped silicon (nTD-Si) detectors have become widely used for the identification of low-energy charged particles. Although the particle discrimination capability of this method has been well demonstrated for small incident angles, the particle discrimination performance may be af… ▽ More In recent years, particle discrimination methods based on digital waveform analysis techniques for neutron-transmutation-doped silicon (nTD-Si) detectors have become widely used for the identification of low-energy charged particles. Although the particle discrimination capability of this method has been well demonstrated for small incident angles, the particle discrimination performance may be affected by changes in the detector response when the detector is moved closer to the charged particle source and the incident position distribution and incident angle distribution to the detector become wide. In this study, we performed a beam test for particle discrimination in light-charged ($Z \le 2$) particles using the digital waveform analysis method with a pad-type nTD-Si detector and investigated the dependence of the performance of the particle discrimination on the incident position and incident angle. As the incident angle increased, a decrease in the maximum current was observed, which was sufficient to affect the performance of the particle discrimination. This decrease can be expressed as a function of the penetration depth of the charged particles into the detector, which varies for each nuclide. △ Less

Submitted 30 August, 2023; originally announced August 2023.

Comments: 8 pages, 13 figures

Journal ref: Nucl. Instrum. Meth. Phys. Res. A 1059 (2024) 168984

Nonlinear parametric models of viscoelastic fluid flows

Authors: Cassio M. Oishi, Alan A. Kaptanoglu, J. Nathan Kutz, Steven L. Brunton

Abstract: Reduced-order models have been widely adopted in fluid mechanics, particularly in the context of Newtonian fluid flows. These models offer the ability to predict complex dynamics, such as instabilities and oscillations, at a considerably reduced computational cost. In contrast, the reduced-order modeling of non-Newtonian viscoelastic fluid flows remains relatively unexplored. This work leverag… ▽ More Reduced-order models have been widely adopted in fluid mechanics, particularly in the context of Newtonian fluid flows. These models offer the ability to predict complex dynamics, such as instabilities and oscillations, at a considerably reduced computational cost. In contrast, the reduced-order modeling of non-Newtonian viscoelastic fluid flows remains relatively unexplored. This work leverages the sparse identification of nonlinear dynamics algorithm to develop interpretable reduced-order models for viscoelastic flows. In particular, we explore a benchmark oscillatory viscoelastic flow on the four-roll mill geometry using the classical Oldroyd-B fluid. This flow exemplifies many canonical challenges associated with non-Newtonian flows, including transitions, asymmetries, instabilities, and bifurcations arising from the interplay of viscous and elastic forces, all of which require expensive computations in order to resolve the fast timescales and long transients characteristic of such flows. First, we demonstrate the effectiveness of our data-driven surrogate model to predict the transient evolution and accurately reconstruct the spatial flow field for fixed flow parameters. We then develop a fully parametric, nonlinear model capable of capturing the dynamic variations as a function of the Weissenberg number. While the training data is predominantly concentrated on a limit cycle regime for moderate Wi, we show that the parameterized model can be used to extrapolate, accurately predicting the dominant dynamics in the case of high Weissenberg numbers. The proposed methodology represents an initial step in the field of reduced-order modeling for viscoelastic flows with the potential to be further refined and enhanced for the design, optimization, and control of a wide range of non-Newtonian fluid flows using machine learning and reduced-order modeling techniques. △ Less

Submitted 1 December, 2023; v1 submitted 8 August, 2023; originally announced August 2023.

Elasto-viscoplastic Spreading: from Plastocapillarity to Elastocapillarity

Authors: Hugo L. Franc, Maziyar Jalaal, Cassio M. Oishi

Abstract: We study the spreading of elastoviscoplastic (EVP) droplets under surface tension effects. The non- Newtonian material flows like a viscoelastic liquid above the yield stress and behaves like a viscoelastic solid below it. Hence, the droplet initially flows under surface tension forces but eventually reaches a final equilibrium shape when the stress everywhere inside the droplet falls below the re… ▽ More We study the spreading of elastoviscoplastic (EVP) droplets under surface tension effects. The non- Newtonian material flows like a viscoelastic liquid above the yield stress and behaves like a viscoelastic solid below it. Hence, the droplet initially flows under surface tension forces but eventually reaches a final equilibrium shape when the stress everywhere inside the droplet falls below the resisting rheological stresses. We use numerical simulations and combine Volume-of-Fluid (VOF) method and an EVP constitutive model to systematically study the dynamics of spreading and the final shape of the droplets. The spreading process examined in this study finds applications in coating, droplet-based inkjet printing, and 3D printing, where complex fluids such as paints, thermoplastic filaments, or bio-inks are deposited onto surfaces. Additionally, the computational framework enables the study of a wide range of multiphase interfacial phenomena, from elastocapillarity to plastocapillarity. △ Less

Submitted 11 June, 2023; originally announced June 2023.

Comments: 15 pages, 14 figures

SPring-8 LEPS2 beamline: A facility to produce a multi-GeV photon beam via laser Compton scattering

Authors: N. Muramatsu, M. Yosoi, T. Yorita, Y. Ohashi, J. K. Ahn, S. Ajimura, Y. Asano, W. C. Chang, J. Y. Chen, S. Date, T. Gogami, H. Hamano, T. Hashimoto, T. Hiraiwa, T. Hotta, T. Ishikawa, Y. Kasamatsu, H. Katsuragawa, R. Kobayakawa, H. Kohri, S. Masumoto, Y. Matsumura, M. Miyabe, K. Mizutani, Y. Morino , et al. (26 additional authors not shown)

Abstract: We have constructed a new laser-Compton-scattering facility, called the LEPS2 beamline, at the 8-GeV electron storage ring, SPring-8. This facility provides a linearly polarized photon beam in a tagged energy range of 1.3--2.4 GeV. Thanks to a small divergence of the low-emittance storage-ring electrons, the tagged photon beam has a size (sigma) suppressed to about 4 mm even after it travels about… ▽ More We have constructed a new laser-Compton-scattering facility, called the LEPS2 beamline, at the 8-GeV electron storage ring, SPring-8. This facility provides a linearly polarized photon beam in a tagged energy range of 1.3--2.4 GeV. Thanks to a small divergence of the low-emittance storage-ring electrons, the tagged photon beam has a size (sigma) suppressed to about 4 mm even after it travels about 130 m to the experimental building that is independent of the storage ring building and contains large detector systems. This beamline is designed to achieve a photon beam intensity higher than that of the first laser-Compton-scattering beamline at SPring-8 by adopting the simultaneous injection of up to four high-power laser beams and increasing a transmittance for the long photon-beam path up to about 77%. The new beamline is under operation for hadron photoproduction experiments. △ Less

Submitted 14 December, 2021; originally announced December 2021.