-
First In-Beam Demonstration of a hybrid LaBr3/CeBr3/BGO array to measure radiative capture resonance energies in an extended gas target using a novel time of flight technique
Authors:
G. Christian,
D. Hutcheon,
I. Casandjian,
S. M. Collins,
A. C. Edwin,
E. Desmarais,
U. Greife,
A. Katrusiak,
A. Lennarz,
M. Loria,
S. Mollo,
J. O'Connell,
S. Pascu,
L. Pedro-Botet,
Zs. Podolyak,
B. J. Reed,
P. H. Regan,
C. Ruiz,
R. Shearman,
S. Upadhyayula,
L. Wagner,
M. Williams
Abstract:
We have deployed a new hybrid array of LaBr3, CeBr3, and BGO scintillators for detecting $γ$ rays at the DRAGON recoil separator at TRIUMF. The array was developed to improve $γ$-ray timing resolution over the existing BGO array. This allows the average position of resonant capture in an extended gas target to be determined with $\sim$15 mm precision or better, even with five or fewer detected cap…
▽ More
We have deployed a new hybrid array of LaBr3, CeBr3, and BGO scintillators for detecting $γ$ rays at the DRAGON recoil separator at TRIUMF. The array was developed to improve $γ$-ray timing resolution over the existing BGO array. This allows the average position of resonant capture in an extended gas target to be determined with $\sim$15 mm precision or better, even with five or fewer detected capture events. This, in turn, allows determination of resonant capture energies with statistical uncertainties below ${\sim} 1\%$. Here we report the results of a first in-beam demonstration of the array, measuring the $E_{cm} = 0.4906(3)$ MeV resonance in the ${}^{23}\mathrm{Na}(p,γ){}^{24}\mathrm{Mg}$ reaction, focusing on the timing properties of the array and its anticipated performance in future experiments with radioactive beams.
△ Less
Submitted 7 January, 2025;
originally announced January 2025.
-
Experimental validation of Fastcat kV and MV cone beam CT (CBCT) simulator
Authors:
Jericho O'Connell,
Clayton Lindsay,
Magdalena Bazalova-Carter
Abstract:
Purpose: To experimentally validate the Fastcat cone beam CT (CBCT) simulator against kV and MV CBCT images acquired with a Varian Truebeam linac.
Methods: kV and MV CBCT images of a Catphan 504 phantom were acquired using a 100 kVp beam with the on-board imager (OBI) and a 6 MV treatment beam with the electronic portal imaging device (EPID), respectively. The kV Fastcat simulation was performed…
▽ More
Purpose: To experimentally validate the Fastcat cone beam CT (CBCT) simulator against kV and MV CBCT images acquired with a Varian Truebeam linac.
Methods: kV and MV CBCT images of a Catphan 504 phantom were acquired using a 100 kVp beam with the on-board imager (OBI) and a 6 MV treatment beam with the electronic portal imaging device (EPID), respectively. The kV Fastcat simulation was performed using detailed models of the x-ray source, bowtie filter, a high resolution voxelized virtual Catphan phantom, anti-scatter grid, and the CsI scintillating detector. Likewise, an MV Fastcat CBCT was simulated with detailed models for the beam energy spectrum, flattening filter, a high resolution voxelized virtual Catphan phantom, and the GOS scintillating detector. Experimental and simulated CBCT images of the phantom were compared with respect to HU values, contrast to noise ratio (CNR),and dose linearity. Detector modulation transfer function (MTF) for the two detectors were also experimentally validated. Fastcat's dose calculations were compared to MC dose calculations performed with Topas.
Results: For the kV and MV simulations, respectively: Contrast agreed within 14 and 9 HUs and detector MTF agreed within 4.2% and 2.5%. Likewise, CNR had a root mean squared error (RMSE) of 2.6% and 1.4%. Dose agreed within 2.4% and 1.6% of MC values. The kV and MV CBCT images took 71 and 72 seconds to simulate in Fastcat with 887 and 493 projections, respectively.
Conclusions: We present a multi energy experimental validation of a fast and accurate CBCT simulator against a commercial linac. The simulator is open source and all models found in this work can be downloaded from https://github.com/jerichooconnell/fastcat.git
△ Less
Submitted 28 April, 2021;
originally announced April 2021.
-
FastCAT: Fast Cone Beam CT (CBCT) Simulation
Authors:
Jericho O'Connell,
Magdalena Bazalova-Carter
Abstract:
The fastCAT application uses pre-calculated Monte Carlo (MC) CBCT phantom-specific scatter and detector response functions to reduce simulation time for megavoltage (MV) and kilovoltage (kV) CBCT imaging. Pre-calculated x-ray beam energy spectra, detector optical spread functions and energy deposition, and phantom scatter kernels are combined with GPU raytracing to produce CBCT volumes. MV x-ray b…
▽ More
The fastCAT application uses pre-calculated Monte Carlo (MC) CBCT phantom-specific scatter and detector response functions to reduce simulation time for megavoltage (MV) and kilovoltage (kV) CBCT imaging. Pre-calculated x-ray beam energy spectra, detector optical spread functions and energy deposition, and phantom scatter kernels are combined with GPU raytracing to produce CBCT volumes. MV x-ray beam spectra are simulated with EGSnrc for 2.5 and 6 MeV electron beams incident on a variety of target materials and kV x-ray beam spectra are calculated analytically for an x-ray tube with a tungsten anode. Detectors were modelled in Geant4 extended by Topas and included optical transport in the scintillators. Two MV detectors were modelled, a standard Varian AS1200 GOS detector and a novel CWO high detective quantum efficiency detector. A kV CsI detector was also modelled. Energy dependent scatter kernels were created in Topas for two 16-cm diameter phantoms: A Catphan 515 contrast phantom and an anthropomorphic head phantom. The Catphan phantom contained inserts of 1-5 mm in diameter of six different tissue types. FastCAT simulations retain high fidelity to measurements and MC simulations: MTF curves were within 3.5% and 1.2% of measured values for the CWO and GOS detectors, respectively. HU values and CNR in a fastCAT Catphan 515 simulation were seen to be within 95 % confidence intervals of an equivalent MC simulation for all of the tissues with root mean squared errors less than 16 HU and 1.6 in HU values and CNR comparisons, respectively. A fastCAT simulation of the Catphan 515 module with an image size of 1024x1024x10 voxels took 61 seconds on a GPU while the equivalent Topas MC was estimated to take more than 0.3 CPU years. The fastCAT application can be found at https://github.com/jerichooconnell/fastCATs.git.
△ Less
Submitted 16 February, 2021; v1 submitted 9 November, 2020;
originally announced November 2020.
-
Unsupervised Learning Methods in X-ray Spectral Imaging Material Segmentation
Authors:
Jericho O'Connell,
Kevin Murphy,
Spencer Robinson,
Kris Iniewski,
Magdalena Bazalova-Carter
Abstract:
In this work, we have investigated a number of unsupervised learning methods for material segmentation in projection x-ray imaging with a spectral detector. A phantom containing two hard materials (glass, steel) and three soft materials (PVC, polypropylene, and PFTE) all embedded in PMMA was imaged with a 5 energy bin spectal detector. The projection images were utilized to test nine unsupervised…
▽ More
In this work, we have investigated a number of unsupervised learning methods for material segmentation in projection x-ray imaging with a spectral detector. A phantom containing two hard materials (glass, steel) and three soft materials (PVC, polypropylene, and PFTE) all embedded in PMMA was imaged with a 5 energy bin spectal detector. The projection images were utilized to test nine unsupervised learning algorithms for automated material segmentation. Each algorithm was investigated using single energy (SE), dual energy (DE) and multi energy (ME) images. Clustering results were scored based on homogeneity and completeness of the clusters, which were combined into the Rosenberg and Hirshberg's V-measure. Principle component analysis (PCA), independent component analysis (ICA), and non-negative matrix factorization (NMF) were tested as dimensional reduction methods. ME, DE and SE material segmentation was performed using five, two, and single energy images, respectively. ME had the highest V-measure on the soft materials using PCA and a novel interpolating bayesian gaussian mixture model (BGMM) clustering with a V-measure of 0.71. This was by 3.5% better than DE and 20.3% better than SE. Conversely, SE imaging was most capable of hard tissue segmentation using the standard BGMM, with a V-measures of 0.84. This was 6.3% better than DE and 5.0% better than ME. This work demonstrated that ME x-ray imaging might be superior in segmenting soft tissues compared to conventional SE x-ray imaging.
△ Less
Submitted 10 June, 2019; v1 submitted 7 April, 2019;
originally announced April 2019.
-
Radius and Structure models for the First Super-Earth Planet
Authors:
Diana Valencia,
Dimitar D. Sasselov,
Rirchard J. O'Connell
Abstract:
With improving methods and surveys, the young field of extrasolar planets has recently expanded into a qualitatively new domain - terrestrial (mostly rocky) planets. The first such planets were discovered during the past year, judging by their measured masses of less than 10 Earth-masses ($M_{\oplus}$) or Super-Earths. They are introducing a novel physical regime that has not been explored befor…
▽ More
With improving methods and surveys, the young field of extrasolar planets has recently expanded into a qualitatively new domain - terrestrial (mostly rocky) planets. The first such planets were discovered during the past year, judging by their measured masses of less than 10 Earth-masses ($M_{\oplus}$) or Super-Earths. They are introducing a novel physical regime that has not been explored before as such planets do not exist in our Solar System. Their composition can be either completely terrestrial or harbour an extensive ocean (water and ices) above a rocky core. We model the structure and properties of the first Super-Earth (mass $\sim$ 7.5 $M_{\oplus}$) discovered in 2005, illustrating the possibilities in composition and providing radius evaluations in view of future detection of similar planets by transits. We find that a threshold in radius exists for which larger values indicate that a Super-Earth most certainly has an extensive water content. In the case of GJ876d this threshold is at about 12000 km. Our results show that unique characterization of the bulk composition of Super-Earths will be possible in future transit studies.
△ Less
Submitted 4 October, 2006;
originally announced October 2006.
