-
BLUE: combining correlated estimates of physics observables within ROOT using the Best Linear Unbiased Estimate method
Authors:
Richard Nisius
Abstract:
This software performs the combination of $m$ correlated estimates of $n$ physics observables ($m\ge n$) using the Best Linear Unbiased Estimate (BLUE) method. It is implemented as a C++ class, to be used within the ROOT analysis package. It features easy disabling of specific estimates or uncertainty sources, the investigation of different correlation assumptions, and allows performing combinatio…
▽ More
This software performs the combination of $m$ correlated estimates of $n$ physics observables ($m\ge n$) using the Best Linear Unbiased Estimate (BLUE) method. It is implemented as a C++ class, to be used within the ROOT analysis package. It features easy disabling of specific estimates or uncertainty sources, the investigation of different correlation assumptions, and allows performing combinations according to the importance of the estimates. This enables systematic investigations of the combination on details of the measurements from within the software, without touching the input.
△ Less
Submitted 13 April, 2020; v1 submitted 28 January, 2020;
originally announced January 2020.
-
TCAD simulations of pixel sensors for the ATLAS ITk upgrade and performance of annealed planar pixel modules
Authors:
Julien-Christopher Beyer,
Alessandro La Rosa,
Anna Macchiolo,
Richard Nisius,
Natascha Savic,
Reem Taibah
Abstract:
For the high luminosity phase of the Large Hadron Collider to start operation around 2026, a major upgrade of the ATLAS Inner Tracker (ITk) is in preparation. Thanks to their low power dissipation and high charge-collection efficiency after irradiation, thin planar pixel modules are the baseline option to instrument all, except for the innermost layer of the pixel detector. To optimise the sensor…
▽ More
For the high luminosity phase of the Large Hadron Collider to start operation around 2026, a major upgrade of the ATLAS Inner Tracker (ITk) is in preparation. Thanks to their low power dissipation and high charge-collection efficiency after irradiation, thin planar pixel modules are the baseline option to instrument all, except for the innermost layer of the pixel detector. To optimise the sensor layout for a pixel cell size of $50\times50\,μm^2$, TCAD simulations are being performed. Charge-collection efficiency, electronic noise and electrical-field properties are investigated. A radiation-damage model is employed in TCAD simulations to estimate the performance before- and after irradiation. The impact of storage time at room temperature for the ITk pixel detector during maintenance periods are estimated using sensors irradiated up to a fluence of 5$\times10^{15}\,$n$_\text{eq}$/cm$^2$. Pixel sensors of $100-150\,μm$ thickness, interconnected to FE-I4 read-out chips with pixel dimensions of $50\times250\,μm^2$, are characterised using the testbeam facilities at the CERN-SPS and DESY. The charge-collection and hit efficiencies are compared before and after annealing at room temperature for up to one year.
△ Less
Submitted 24 October, 2018;
originally announced October 2018.
-
Production and Integration of the ATLAS Insertable B-Layer
Authors:
B. Abbott,
J. Albert,
F. Alberti,
M. Alex,
G. Alimonti,
S. Alkire,
P. Allport,
S. Altenheiner,
L. Ancu,
E. Anderssen,
A. Andreani,
A. Andreazza,
B. Axen,
J. Arguin,
M. Backhaus,
G. Balbi,
J. Ballansat,
M. Barbero,
G. Barbier,
A. Bassalat,
R. Bates,
P. Baudin,
M. Battaglia,
T. Beau,
R. Beccherle
, et al. (352 additional authors not shown)
Abstract:
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and i…
▽ More
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector.
△ Less
Submitted 6 June, 2018; v1 submitted 2 March, 2018;
originally announced March 2018.
-
Performance of irradiated thin n-in-p planar pixel sensors for the ATLAS Inner Tracker upgrade
Authors:
Natascha Savic,
Julien-Christopher Beyer,
Bojan Hiti,
Alessandro La Rosa,
Gregor Kramberger,
Anna Macchiolo,
Igor Mandic,
Richard Nisius,
Martin Petek
Abstract:
The ATLAS collaboration will replace its tracking detector with new all silicon pixel and strip systems. This will allow to cope with the higher radiation and occupancy levels expected after the 5-fold increase in the luminosity of the LHC accelerator complex (HL-LHC). In the new tracking detector (ITk) pixel modules with increased granularity will implement to maintain the occupancy with a higher…
▽ More
The ATLAS collaboration will replace its tracking detector with new all silicon pixel and strip systems. This will allow to cope with the higher radiation and occupancy levels expected after the 5-fold increase in the luminosity of the LHC accelerator complex (HL-LHC). In the new tracking detector (ITk) pixel modules with increased granularity will implement to maintain the occupancy with a higher track density. In addition, both sensors and read-out chips composing the hybrid modules will be produced employing more radiation hard technologies with respect to the present pixel detector. Due to their outstanding performance in terms of radiation hardness, thin n-in-p sensors are promising candidates to instrument a section of the new pixel system. Recently produced and developed sensors of new designs will be presented. To test the sensors before interconnection to chips, a punch-through biasing structure has been implemented. Its design has been optimized to decrease the possible tracking efficiency losses observed. After irradiation, they were caused by the punch-through biasing structure. A sensor compatible with the ATLAS FE-I4 chip with a pixel size of 50x250 $\mathrmμ$m$^{2}$, subdivided into smaller pixel implants of 30x30 $\mathrmμ$m$^{2}$ size was designed to investigate the performance of the 50x50 $\mathrmμ$m$^{2}$ pixel cells foreseen for the HL-LHC. Results on sensor performance of 50x250 and 50x50 $\mathrmμ$m$^{2}$ pixel cells in terms of efficiency, charge collection and electric field properties are obtained with beam tests and the Transient Current Technique.
△ Less
Submitted 25 September, 2017;
originally announced September 2017.
-
Optimization of thin n-in-p planar pixel modules for the ATLAS upgrade at HL-LHC
Authors:
Anna Macchiolo,
Julien Beyer,
Alessandro La Rosa,
Richard Nisius,
Natascha Savic
Abstract:
The ATLAS experiment will undergo around the year 2025 a replacement of the tracker system in view of the high luminosity phase of the LHC (HL-LHC) with a new 5-layer pixel system. Thin planar pixel sensors are promising candidates to instrument the innermost region of the new pixel system, thanks to the reduced contribution to the material budget and their high charge collection efficiency after…
▽ More
The ATLAS experiment will undergo around the year 2025 a replacement of the tracker system in view of the high luminosity phase of the LHC (HL-LHC) with a new 5-layer pixel system. Thin planar pixel sensors are promising candidates to instrument the innermost region of the new pixel system, thanks to the reduced contribution to the material budget and their high charge collection efficiency after irradiation. The sensors of 50-150 $μ$m thickness, interconnected to FE-I4 read-out chips, have been characterized with radioactive sources and beam tests. In particular active edge sensors have been investigated. The performance of two different versions of edge designs are compared: the first with a bias ring, and the second one where only a floating guard ring has been implemented. The hit efficiency at the edge has also been studied after irradiation at a fluence of $10^{15}$ \neqcm. Highly segmented sensors will represent a challenge for the tracking in the forward region of the pixel system at HL-LHC. In order to reproduce the performance of 50x50 $μ$m$^2$ pixels at high pseudo-rapidity values, FE-I4 compatible planar pixel sensors have been studied before and after irradiation in beam tests at high incidence angles with respect to the short pixel direction. Results on the hit efficiency in this configuration are discussed for different sensor thicknesses.
△ Less
Submitted 12 January, 2017;
originally announced January 2017.
-
Characterization of Novel Thin N-in-P Planar Pixel Modules for the ATLAS Inner Tracker Upgrade
Authors:
Julien-Christopher Beyer,
Alessandro La Rosa,
Anna Macchiolo,
Richard Nisius,
Natascha Savic
Abstract:
The ATLAS experiment will undergo a major upgrade of the tracker system in view of the high luminosity phase of the LHC (HL-LHC) to start operation in 2026. The most severe challenges are to be faced by the innermost layers of the pixel detector which will have to withstand a radiation fluence of up to $1.4\times10^{16}\,$n$_\text{eq}$/cm$^{2}$. Thin planar pixel modules are promising candidates t…
▽ More
The ATLAS experiment will undergo a major upgrade of the tracker system in view of the high luminosity phase of the LHC (HL-LHC) to start operation in 2026. The most severe challenges are to be faced by the innermost layers of the pixel detector which will have to withstand a radiation fluence of up to $1.4\times10^{16}\,$n$_\text{eq}$/cm$^{2}$. Thin planar pixel modules are promising candidates to instrument these layers, thanks to the small material budget and their high charge collection efficiency after irradiation. Sensors of $100-200\,μ$m thickness, interconnected to FE-I4 read-out chips, are characterized with radioactive sources as well as testbeams at the CERN-SPS and DESY. The performance of sensors irradiated up to a fluence of $5\times 10^{15}\,$n$_\text{eq}$/cm$^{2}$ is compared in terms of charge collection and hit efficiency. Highly segmented sensors are a challenge for the tracking in the forward region of the pixel system at the HL-LHC. To reproduce the performance of $50$x$50\,μ$m$^2$ pixels at high pseudo-rapidities, FE-I4 compatible planar pixel sensors are studied before and after irradiation in beam tests at high incidence angle ($80^\circ$) with respect to the short pixel direction. Results on cluster shape and hit efficiency will be shown.
△ Less
Submitted 5 December, 2016;
originally announced December 2016.
-
Investigation of thin n-in-p planar pixel modules for the ATLAS upgrade
Authors:
N. Savic,
J. Beyer,
A. La Rosa,
A. Macchiolo,
R. Nisius
Abstract:
In view of the High Luminosity upgrade of the Large Hadron Collider (HL-LHC), planned to start around 2023-2025, the ATLAS experiment will undergo a replacement of the Inner Detector. A higher luminosity will imply higher irradiation levels and hence will demand more ra- diation hardness especially in the inner layers of the pixel system. The n-in-p silicon technology is a promising candidate to i…
▽ More
In view of the High Luminosity upgrade of the Large Hadron Collider (HL-LHC), planned to start around 2023-2025, the ATLAS experiment will undergo a replacement of the Inner Detector. A higher luminosity will imply higher irradiation levels and hence will demand more ra- diation hardness especially in the inner layers of the pixel system. The n-in-p silicon technology is a promising candidate to instrument this region, also thanks to its cost-effectiveness because it only requires a single sided processing in contrast to the n-in-n pixel technology presently employed in the LHC experiments. In addition, thin sensors were found to ensure radiation hardness at high fluences. An overview is given of recent results obtained with not irradiated and irradiated n-in-p planar pixel modules. The focus will be on n-in-p planar pixel sensors with an active thickness of 100 and 150 um recently produced at ADVACAM. To maximize the active area of the sensors, slim and active edges are implemented. The performance of these modules is investigated at beam tests and the results on edge efficiency will be shown.
△ Less
Submitted 28 November, 2016; v1 submitted 16 September, 2016;
originally announced September 2016.
-
Development of n-in-p pixel modules for the ATLAS Upgrade at HL-LHC
Authors:
Anna Macchiolo,
Richard Nisius,
Natascha Savic,
Stefano Terzo
Abstract:
Thin planar pixel modules are promising candidates to instrument the inner layers of the new ATLAS pixel detector for HL-LHC, thanks to the reduced contribution to the material budget and their high charge collection efficiency after irradiation. 100-200 $μ$m thick sensors, interconnected to FE-I4 read-out chips, have been characterized with radioactive sources and beam tests at the CERN-SPS and D…
▽ More
Thin planar pixel modules are promising candidates to instrument the inner layers of the new ATLAS pixel detector for HL-LHC, thanks to the reduced contribution to the material budget and their high charge collection efficiency after irradiation. 100-200 $μ$m thick sensors, interconnected to FE-I4 read-out chips, have been characterized with radioactive sources and beam tests at the CERN-SPS and DESY. The results of these measurements are reported for devices before and after irradiation up to a fluence of $14\times10^{15}$ n$_{eq}$/cm$^2$. The charge collection and tracking efficiency of the different sensor thicknesses are compared. The outlook for future planar pixel sensor production is discussed, with a focus on sensor design with the pixel pitches (50x50 and 25x100 $μ$m$^2$) foreseen for the RD53 Collaboration read-out chip in 65 nm CMOS technology. An optimization of the biasing structures in the pixel cells is required to avoid the hit efficiency loss presently observed in the punch-through region after irradiation. For this purpose the performance of different layouts have been compared in FE-I4 compatible sensors at various fluence levels by using beam test data. Highly segmented sensors will represent a challenge for the tracking in the forward region of the pixel system at HL-LHC. In order to reproduce the performance of 50x50 $μ$m$^2$ pixels at high pseudo-rapidity values, FE-I4 compatible planar pixel sensors have been studied before and after irradiation in beam tests at high incidence angle (80$^\circ$) with respect to the short pixel direction. Results on cluster shapes, charge collection and hit efficiency will be shown.
△ Less
Submitted 16 June, 2016;
originally announced June 2016.
-
Thin n-in-p planar pixel modules for the ATLAS upgrade at HL-LHC
Authors:
N. Savic,
L. Bergbreiter,
J. Breuer,
A. La Rosa,
A. Macchiolo,
R. Nisius,
S. Terzo
Abstract:
The ATLAS experiment will undergo a major upgrade of the tracker system in view of the high luminosity phase of the LHC (HL-LHC) foreseen to start around 2025. Thin planar pixel modules are promising candidates to instrument the new pixel system, thanks to the reduced contribution to the material budget and their high charge collection efficiency after irradiation. New designs of the pixel cells,…
▽ More
The ATLAS experiment will undergo a major upgrade of the tracker system in view of the high luminosity phase of the LHC (HL-LHC) foreseen to start around 2025. Thin planar pixel modules are promising candidates to instrument the new pixel system, thanks to the reduced contribution to the material budget and their high charge collection efficiency after irradiation. New designs of the pixel cells, with an optimized biasing structure, have been implemented in n-in-p planar pixel productions with sensor thicknesses of 270 um. Using beam tests, the gain in hit efficiency is investigated as a function of the received irradiation fluence. The outlook for future thin planar pixel sensor productions will be discussed, with a focus on thin sensors with a thickness of 100 and 150 um and a novel design with the optimized biasing structure and small pixel cells (50 um x 50 um and 25 um x 100 um). These dimensions are foreseen for the new ATLAS read-out chip in 65 nm CMOS technology and the fine segmentation will represent a challenge for the tracking in the forward region of the pixel system at HL-LHC. To predict the performance of 50 um x 50 um pixels at high eta, FE-I4 compatible planar pixel sensors have been studied before and after irradiation in beam tests at high incidence angle with respect to the short pixel direction. Results on cluster shapes, charge collection- and hit efficiency will be shown.
△ Less
Submitted 2 May, 2016;
originally announced May 2016.
-
Thin n-in-p planar pixel sensors and active edge sensors for the ATLAS upgrade at HL-LHC
Authors:
S. Terzo,
A. Macchiolo,
R. Nisius,
B. Paschen
Abstract:
Silicon pixel modules employing n-in-p planar sensors with an active thickness of 200 $μ$m, produced at CiS, and 100-200 $μ$m thin active/slim edge sensor devices, produced at VTT in Finland have been interconnected to ATLAS FE-I3 and FE-I4 read-out chips. The thin sensors are designed for high energy physics collider experiments to ensure radiation hardness at high fluences. Moreover, the active…
▽ More
Silicon pixel modules employing n-in-p planar sensors with an active thickness of 200 $μ$m, produced at CiS, and 100-200 $μ$m thin active/slim edge sensor devices, produced at VTT in Finland have been interconnected to ATLAS FE-I3 and FE-I4 read-out chips. The thin sensors are designed for high energy physics collider experiments to ensure radiation hardness at high fluences. Moreover, the active edge technology of the VTT production maximizes the sensitive region of the assembly, allowing for a reduced overlap of the modules in the pixel layer close to the beam pipe. The CiS production includes also four chip sensors according to the module geometry planned for the outer layers of the upgraded ATLAS pixel detector to be operated at the HL-LHC. The modules have been characterized using radioactive sources in the laboratory and with high precision measurements at beam tests to investigate the hit efficiency and charge collection properties at different bias voltages and particle incidence angles. The performance of the different sensor thicknesses and edge designs are compared before and after irradiation up to a fluence of $1.4\times10^{16}n_{eq}/cm^{2}$.
△ Less
Submitted 20 November, 2014; v1 submitted 30 September, 2014;
originally announced September 2014.
-
On the combination of correlated estimates of a physics observable
Authors:
Richard Nisius
Abstract:
The combination of a number of correlated estimates of a given observable is frequently performed using the Best Linear Unbiased Estimate (BLUE) method. Most features of such a combination can already be seen by analysing the special case of a pair of estimates from two correlated estimators of the observable. Two important parameters of this combination are the weight of the less precise estimate…
▽ More
The combination of a number of correlated estimates of a given observable is frequently performed using the Best Linear Unbiased Estimate (BLUE) method. Most features of such a combination can already be seen by analysing the special case of a pair of estimates from two correlated estimators of the observable. Two important parameters of this combination are the weight of the less precise estimate and the ratio of uncertainties of the combined result and the more precise estimate. Derivatives of these quantities are derived with respect to the correlation and the ratio of uncertainties of the two estimates.
The impact of using either absolute or relative uncertainties in the BLUE combination is investigated on a number of examples including Peelle's Pertinent Puzzle. Using an example, a critical assessment is performed of suggested methods to deal with the fact that both the correlation and the ratio of uncertainties of a pair of estimates are typically only known with some uncertainty. Finally, a proposal is made to decide on the usefulness of a combination and to perform it. The proposal is based on possible improvements with respect to the most precise estimate by including additional estimates. This procedure can be applied to the general case of several observables.
△ Less
Submitted 28 July, 2014; v1 submitted 17 February, 2014;
originally announced February 2014.
-
Heavily Irradiated N-in-p Thin Planar Pixel Sensors with and without Active Edges
Authors:
S. Terzo,
L. Andricek,
A. Macchiolo,
H. G. Moser,
R. Nisius,
R. H. Richter,
P. Weigell
Abstract:
We present the results of the characterization of silicon pixel modules employing n-in-p planar sensors with an active thickness of 150 $\mathrmμ$m, produced at MPP/HLL, and 100-200 $\mathrmμ$m thin active edge sensor devices, produced at VTT in Finland. These thin sensors are designed as candidates for the ATLAS pixel detector upgrade to be operated at the HL-LHC, as they ensure radiation hardnes…
▽ More
We present the results of the characterization of silicon pixel modules employing n-in-p planar sensors with an active thickness of 150 $\mathrmμ$m, produced at MPP/HLL, and 100-200 $\mathrmμ$m thin active edge sensor devices, produced at VTT in Finland. These thin sensors are designed as candidates for the ATLAS pixel detector upgrade to be operated at the HL-LHC, as they ensure radiation hardness at high fluences. They are interconnected to the ATLAS FE-I3 and FE-I4 read-out chips. Moreover, the n-in-p technology only requires a single side processing and thereby it is a cost-effective alternative to the n-in-n pixel technology presently employed in the LHC experiments. High precision beam test measurements of the hit efficiency have been performed on these devices both at the CERN SpS and at DESY, Hamburg. We studied the behavior of these sensors at different bias voltages and different beam incident angles up to the maximum one expected for the new Insertable B-Layer of ATLAS and for HL-LHC detectors. Results obtained with 150 $\mathrmμ$m thin sensors, assembled with the new ATLAS FE-I4 chip and irradiated up to a fluence of 4$\times$10$^{15}\mathrm{n}_{\mathrm{eq}}/\mathrm{cm}^2$, show that they are excellent candidates for larger radii of the silicon pixel tracker in the upgrade of the ATLAS detector at HL-LHC. In addition, the active edge technology of the VTT devices maximizes the active area of the sensor and reduces the material budget to suit the requirements for the innermost layers. The edge pixel performance of VTT modules has been investigated at beam test experiments and the analysis after irradiation up to a fluence of 5$\times$10$^{15}\mathrm{n}_{\mathrm{eq}}/\mathrm{cm}^2$ has been performed using radioactive sources in the laboratory.
△ Less
Submitted 19 February, 2014; v1 submitted 13 January, 2014;
originally announced January 2014.
-
Production and Characterisation of SLID Interconnected n-in-p Pixel Modules with 75 Micrometer Thin Silicon Sensors
Authors:
L. Andricek,
M. Beimforde,
A. Macchiolo,
H-G. Moser,
R. Nisius,
R. H. Richter,
S. Terzo,
P. Weigell
Abstract:
The performance of pixel modules built from 75 micrometer thin silicon sensors and ATLAS read-out chips employing the Solid Liquid InterDiffusion (SLID) interconnection technology is presented. This technology, developed by the Fraunhofer EMFT, is a possible alternative to the standard bump-bonding. It allows for stacking of different interconnected chip and sensor layers without destroying the al…
▽ More
The performance of pixel modules built from 75 micrometer thin silicon sensors and ATLAS read-out chips employing the Solid Liquid InterDiffusion (SLID) interconnection technology is presented. This technology, developed by the Fraunhofer EMFT, is a possible alternative to the standard bump-bonding. It allows for stacking of different interconnected chip and sensor layers without destroying the already formed bonds. In combination with Inter-Chip-Vias (ICVs) this paves the way for vertical integration. Both technologies are combined in a pixel module concept which is the basis for the modules discussed in this paper.
Mechanical and electrical parameters of pixel modules employing both SLID interconnections and sensors of 75 micrometer thickness are covered. The mechanical features discussed include the interconnection efficiency, alignment precision and mechanical strength. The electrical properties comprise the leakage currents, tuning characteristics, charge collection, cluster sizes and hit efficiencies. Targeting at a usage at the high luminosity upgrade of the LHC accelerator called HL-LHC, the results were obtained before and after irradiation up to fluences of $10^{16}$ $\mathrm{n}_{\mathrm{eq}}/\mathrm{cm}^2$ (1 MeV neutrons).
△ Less
Submitted 29 July, 2014; v1 submitted 22 October, 2013;
originally announced October 2013.
-
Development of active edge pixel sensors and four-side buttable modules using vertical integration technologies
Authors:
A. Macchiolo,
L. Andricek,
H. -G. Moser,
R. Nisius,
R. H. Richter,
S. Terzo,
P. Weigell
Abstract:
We present an R&D activity focused on the development of novel modules for the upgrade of the ATLAS pixel system at the High Luminosity LHC (HL-LHC). The modules consist of n-in-p pixel sensors, 100 or 200 $μ$m thick, produced at VTT (Finland) with an active edge technology, which considerably reduces the dead area at the periphery of the device. The sensors are interconnected with solder bump-bon…
▽ More
We present an R&D activity focused on the development of novel modules for the upgrade of the ATLAS pixel system at the High Luminosity LHC (HL-LHC). The modules consist of n-in-p pixel sensors, 100 or 200 $μ$m thick, produced at VTT (Finland) with an active edge technology, which considerably reduces the dead area at the periphery of the device. The sensors are interconnected with solder bump-bonding to the ATLAS FE-I3 and FE-I4 read-out chips, and characterized with radioactive sources and beam tests at the CERN-SPS and DESY. The results of these measurements will be discussed for devices before and after irradiation up to a fluence of $5\times 10^{15}$ \neqcm. We will also report on the R&D activity to obtain Inter Chip Vias (ICVs) on the ATLAS read-out chip in collaboration with the Fraunhofer Institute EMFT. This step is meant to prove the feasibility of the signal transport to the newly created readout pads on the backside of the chips allowing for four side buttable devices without the presently used cantilever for wire bonding. The read-out chips with ICVs will be interconnected to thin pixel sensors, 75 $μ$m and 150 $μ$m thick, with the Solid Liquid Interdiffusion (SLID) technology, which is an alternative to the standard solder bump-bonding.
△ Less
Submitted 18 October, 2013;
originally announced October 2013.
-
Thin n-in-p pixel sensors and the SLID-ICV vertical integration technology for the ATLAS upgrade at the HL-LHC
Authors:
A. Macchiolo,
L. Andricek,
M. Ellenburg,
H. G. Moser,
R. Nisius,
R. H. Richter,
S. Terzo,
P. Weigell
Abstract:
The R&D activity presented is focused on the development of new modules for the upgrade of the ATLAS pixel system at the High Luminosity LHC (HL-LHC). The performance after irradiation of n-in-p pixel sensors of different active thicknesses is studied, together with an investigation of a novel interconnection technique offered by the Fraunhofer Institute EMFT in Munich, the Solid-Liquid-InterDiffu…
▽ More
The R&D activity presented is focused on the development of new modules for the upgrade of the ATLAS pixel system at the High Luminosity LHC (HL-LHC). The performance after irradiation of n-in-p pixel sensors of different active thicknesses is studied, together with an investigation of a novel interconnection technique offered by the Fraunhofer Institute EMFT in Munich, the Solid-Liquid-InterDiffusion (SLID), which is an alternative to the standard solder bump-bonding. The pixel modules are based on thin n-in-p sensors, with an active thickness of 75 um or 150 um, produced at the MPI Semiconductor Laboratory (MPI HLL) and on 100 um thick sensors with active edges, fabricated at VTT, Finland. Hit efficiencies are derived from beam test data for thin devices irradiated up to a fluence of 4e15 neq/cm^2. For the active edge devices, the charge collection properties of the edge pixels before irradiation is discussed in detail, with respect to the inner ones, using measurements with radioactive sources. Beyond the active edge sensors, an additional ingredient needed to design four side buttable modules is the possibility of moving the wire bonding area from the chip surface facing the sensor to the backside, avoiding the implementation of the cantilever extruding beyond the sensor area. The feasibility of this process is under investigation with the FE-I3 SLID modules, where Inter Chip Vias are etched, employing an EMFT technology, with a cross section of 3 um x 10 um, at the positions of the original wire bonding pads.
△ Less
Submitted 30 October, 2012;
originally announced October 2012.
-
Novel Silicon n-in-p Pixel Sensors for the future ATLAS Upgrades
Authors:
A. La Rosa,
C. Gallrapp,
A. Macchiolo,
R. Nisius,
H. Pernegger,
R. H. Richter,
P. Weigell
Abstract:
In view of the LHC upgrade phases towards HL-LHC the ATLAS experiment plans to upgrade the Inner Detector with an all silicon system. The n-in-p silicon technology is a promising candidate for the pixel upgrade thanks to its radiation hardness and cost effectiveness, that allow for enlarging the area instrumented with pixel detectors. We present the characterization and performance of novel n-in-p…
▽ More
In view of the LHC upgrade phases towards HL-LHC the ATLAS experiment plans to upgrade the Inner Detector with an all silicon system. The n-in-p silicon technology is a promising candidate for the pixel upgrade thanks to its radiation hardness and cost effectiveness, that allow for enlarging the area instrumented with pixel detectors. We present the characterization and performance of novel n-in-p planar pixel sensors produced by CiS (Germany) connected by bump bonding to the ATLAS readout chip FE-I3. These results are obtained before and after irradiation up to a fluence of 10^16 1-MeV n_eq/cm^2, and prove the operability of this kind of sensors in the harsh radiation environment foreseen for the pixel system at HL-LHC. We also present an overview of the new pixel production, which is on-going at CiS for sensors compatible with the new ATLAS readout chip FE-I4.
△ Less
Submitted 23 May, 2012;
originally announced May 2012.
-
SLID-ICV Vertical Integration Technology for the ATLAS Pixel Upgrades
Authors:
A. Macchiolo,
L. Andricek,
H. G. Moser,
R. Nisius,
R. H. Richter,
P. Weigell
Abstract:
We present the results of the characterization of pixel modules composed of 75 um thick n-in-p sensors and ATLAS FE-I3 chips, interconnected with the SLID (Solid Liquid Inter-Diffusion) technology. This technique, developed at Fraunhofer-EMFT, is explored as an alternative to the bump-bonding process. These modules have been designed to demonstrate the feasibility of a very compact detector to be…
▽ More
We present the results of the characterization of pixel modules composed of 75 um thick n-in-p sensors and ATLAS FE-I3 chips, interconnected with the SLID (Solid Liquid Inter-Diffusion) technology. This technique, developed at Fraunhofer-EMFT, is explored as an alternative to the bump-bonding process. These modules have been designed to demonstrate the feasibility of a very compact detector to be employed in the future ATLAS pixel upgrades, making use of vertical integration technologies. This module concept also envisages Inter-Chip-Vias (ICV) to extract the signals from the backside of the chips, thereby achieving a higher fraction of active area with respect to the present pixel module design. In the case of the demonstrator module, ICVs are etched over the original wire bonding pads of the FE-I3 chip. In the modules with ICVs the FE-I3 chips will be thinned down to 50 um. The status of the ICV preparation is presented.
△ Less
Submitted 29 February, 2012;
originally announced February 2012.
-
Performance of novel silicon n-in-p planar Pixel Sensors
Authors:
C. Gallrapp,
A. La Rosa,
A. Macchiolo,
R. Nisius,
H. Pernegger,
R. H. Richter,
P. Weigell
Abstract:
The performance of novel n-in-p planar pixel detectors, designed for future upgrades of the ATLAS Pixel system is presented. The n-in-p silicon sensors technology is a promising candidate for the pixel upgrade thanks to its radiation hardness and cost effectiveness, that allow for enlarging the area instrumented with pixel detectors. The n-in-p modules presented here are composed of pixel sensors…
▽ More
The performance of novel n-in-p planar pixel detectors, designed for future upgrades of the ATLAS Pixel system is presented. The n-in-p silicon sensors technology is a promising candidate for the pixel upgrade thanks to its radiation hardness and cost effectiveness, that allow for enlarging the area instrumented with pixel detectors. The n-in-p modules presented here are composed of pixel sensors produced by CiS connected by bump-bonding to the ATLAS readout chip FE-I3. The characterization of these devices has been performed before and after irradiation up to a fluence of 5 x 10**15 1 MeV neq cm-2 . Charge collection measurements carried out with radioactive sources have proven the functioning of this technology up to these particle fluences. First results from beam test data with a 120 GeV/c pion beam at the CERN-SPS are also discussed, demonstrating a high tracking efficiency of (98.6 \pm 0.3)% and a high collected charge of about 10 ke for a device irradiated at the maximum fluence and biased at 1 kV.
△ Less
Submitted 5 March, 2012; v1 submitted 22 December, 2011;
originally announced December 2011.
-
Performance of n-in-p pixel detectors irradiated at fluences up to 5x10**15 neq/cm**2 for the future ATLAS upgrades
Authors:
A. Macchiolo,
C. Gallrapp,
A. La Rosa,
R. Nisius,
H. Pernegger,
R. H. Richter,
P. Weigell
Abstract:
We present the results of the characterization of novel n-in-p planar pixel detectors, designed for the future upgrades of the ATLAS pixel system. N-in-p silicon devices are a promising candidate to replace the n-in-n sensors thanks to their radiation hardness and cost effectiveness, that allow for enlarging the area instrumented with pixel detectors. The n-in-p modules presented here are composed…
▽ More
We present the results of the characterization of novel n-in-p planar pixel detectors, designed for the future upgrades of the ATLAS pixel system. N-in-p silicon devices are a promising candidate to replace the n-in-n sensors thanks to their radiation hardness and cost effectiveness, that allow for enlarging the area instrumented with pixel detectors. The n-in-p modules presented here are composed of pixel sensors produced by CiS connected by bump-bonding to the ATLAS readout chip FE-I3. The characterization of these devices has been performed with the ATLAS pixel read-out systems, TurboDAQ and USBPIX, before and after irradiation with 25 MeV protons and neutrons up to a fluence of 5x10**15 neq /cm2. The charge collection measurements carried out with radioactive sources have proven the feasibility of employing this kind of detectors up to these particle fluences. The collected charge has been measured to be for any fluence in excess of twice the value of the FE-I3 threshold, tuned to 3200 e. The first results from beam test data with 120 GeV pions at the CERN-SPS are also presented, demonstrating a high tracking efficiency before irradiation and a high collected charge for a device irradiated at 10**15 neq /cm2. This work has been performed within the framework of the RD50 Collaboration.
△ Less
Submitted 29 February, 2012; v1 submitted 20 October, 2011;
originally announced October 2011.
-
Characterization of Thin Pixel Sensor Modules Interconnected with SLID Technology Irradiated to a Fluence of 2$\cdot 10^{15}$\,n$_{\mathrm{eq}}$/cm$^2$
Authors:
P. Weigell,
L. Andricek,
M. Beimforde,
A. Macchiolo,
H. -G. Moser,
R. Nisius,
R. -H. Richter
Abstract:
A new module concept for future ATLAS pixel detector upgrades is presented, where thin n-in-p silicon sensors are connected to the front-end chip exploiting the novel Solid Liquid Interdiffusion technique (SLID) and the signals are read out via Inter Chip Vias (ICV) etched through the front-end. This should serve as a proof of principle for future four-side buttable pixel assemblies for the ATLAS…
▽ More
A new module concept for future ATLAS pixel detector upgrades is presented, where thin n-in-p silicon sensors are connected to the front-end chip exploiting the novel Solid Liquid Interdiffusion technique (SLID) and the signals are read out via Inter Chip Vias (ICV) etched through the front-end. This should serve as a proof of principle for future four-side buttable pixel assemblies for the ATLAS upgrades, without the cantilever presently needed in the chip for the wire bonding.
The SLID interconnection, developed by the Fraunhofer EMFT, is a possible alternative to the standard bump-bonding. It is characterized by a very thin eutectic Cu-Sn alloy and allows for stacking of different layers of chips on top of the first one, without destroying the pre-existing bonds. This paves the way for vertical integration technologies.
Results of the characterization of the first pixel modules interconnected through SLID as well as of one sample irradiated to $2\cdot10^{15}$\,\neqcm{} are discussed.
Additionally, the etching of ICV into the front-end wafers was started. ICVs will be used to route the signals vertically through the front-end chip, to newly created pads on the backside. In the EMFT approach the chip wafer is thinned to (50--60)\,$μ$m.
△ Less
Submitted 23 December, 2011; v1 submitted 15 September, 2011;
originally announced September 2011.
-
Characterization and Performance of Silicon n-in-p Pixel Detectors for the ATLAS Upgrades
Authors:
Philipp Weigell,
Michael Beimforde,
Christian Gallrapp,
Alessandro La Rosa,
Anna Macchiolo,
Richard Nisius,
Heinz Pernegger,
Rainer Richter
Abstract:
The existing ATLAS Tracker will be at its functional limit for particle fluences of 10^15 neq/cm^2 (LHC). Thus for the upgrades at smaller radii like in the case of the planned Insertable B-Layer (IBL) and for increased LHC luminosities (super LHC) the development of new structures and materials which can cope with the resulting particle fluences is needed. N-in-p silicon devices are a promising c…
▽ More
The existing ATLAS Tracker will be at its functional limit for particle fluences of 10^15 neq/cm^2 (LHC). Thus for the upgrades at smaller radii like in the case of the planned Insertable B-Layer (IBL) and for increased LHC luminosities (super LHC) the development of new structures and materials which can cope with the resulting particle fluences is needed. N-in-p silicon devices are a promising candidate for tracking detectors to achieve these goals, since they are radiation hard, cost efficient and are not type inverted after irradiation. A n-in-p pixel production based on a MPP/HLL design and performed by CiS (Erfurt, Germany) on 300 μm thick Float-Zone material is characterised and the electrical properties of sensors and single chip modules (SCM) are presented, including noise, charge collection efficiencies, and measurements with MIPs as well as an 241Am source. The SCMs are built with sensors connected to the current the ATLAS read-out chip FE-I3. The characterisation has been performed with the ATLAS pixel read-out systems, before and after irradiation with 24 GeV/c protons. In addition preliminary testbeam results for the tracking efficiency and charge collection, obtained with a SCM, are discussed.
△ Less
Submitted 16 April, 2011; v1 submitted 16 December, 2010;
originally announced December 2010.
-
End-cap Modules for the ATLAS SCT
Authors:
Richard Nisius
Abstract:
The performance of prototype end-cap modules of the ATLAS SemiConductor Tracker (SCT) are discussed. The results are obtained in stand-alone as well as test beam measurements performed on modules both before and after irradiation with protons with a total dose corresponding to the expectation for ten years of operation at the LHC. Finally, the present status of construction is summarised.
The performance of prototype end-cap modules of the ATLAS SemiConductor Tracker (SCT) are discussed. The results are obtained in stand-alone as well as test beam measurements performed on modules both before and after irradiation with protons with a total dose corresponding to the expectation for ten years of operation at the LHC. Finally, the present status of construction is summarised.
△ Less
Submitted 4 December, 2003;
originally announced December 2003.
