Multipath Signal-Selective Metasurface: Passive Time-Varying Interlocking Mechanism to Vary Spatial Impedance for Signals with the Same Frequency
Authors:
Kaito Tachi,
Kota Suzuki,
Kairi Takimoto,
Shunsuke Saruwatari,
Kiichi Niitsu,
Peter Njogu,
Hiroki Wakatsuchi
Abstract:
Electromagnetic (EM) multipath interference is difficult to address with passive approaches due to two physical restrictions - the shared frequency of the initial and interfering signals and their variable incident angles. Thus, to address multipath interference, the spatial impedance must be adjusted in response to the incident angles of multiple signals with the same frequency, which is impossib…
▽ More
Electromagnetic (EM) multipath interference is difficult to address with passive approaches due to two physical restrictions - the shared frequency of the initial and interfering signals and their variable incident angles. Thus, to address multipath interference, the spatial impedance must be adjusted in response to the incident angles of multiple signals with the same frequency, which is impossible with classic linear time-invariant (LTI) systems. We present a design concept for metasurface-based spatial filters to overcome LTI behavior and suppress multipath interference signals using a time-varying interlocking mechanism without any active biasing systems. The proposed devices are coupled to the first incoming wave to adjust the spatial impedance and suppress delayed waves in the time domain, which is validated numerically and experimentally. This study opens a new avenue for passive yet time-varying selective EM metasystems, enabling the adjustment of spatially complicated EM waves and fields even at the same frequency.
△ Less
Submitted 4 September, 2024;
originally announced September 2024.
Design guidelines for the SPICE parameters of waveform-selective metasurfaces varying with the incident pulse width at a constant oscillation frequency
Authors:
Shiori Imai,
Haruki Homma,
Kairi Takimoto,
Mizuki Tanikawa,
Jin Nakamura,
Masaya Kaneko,
Yuya Osaki,
Kiichi Niitsu,
Cheng Yongzhi,
Ashif Aminulloh Fathnan,
Hiroki Wakatsuchi
Abstract:
In this study, we numerically demonstrate how the response of recently reported circuit-based metasurfaces is characterized by their circuit parameters. These metasurfaces, which include a set of four diodes as a full wave rectifier, are capable of sensing different waves even at the same frequency in response to the incident waveform, or more specifically the pulse width. This study reveals the r…
▽ More
In this study, we numerically demonstrate how the response of recently reported circuit-based metasurfaces is characterized by their circuit parameters. These metasurfaces, which include a set of four diodes as a full wave rectifier, are capable of sensing different waves even at the same frequency in response to the incident waveform, or more specifically the pulse width. This study reveals the relationship between the electromagnetic response of such waveform-selective metasurfaces and the SPICE parameters of the diodes used. First, we show that reducing a parasitic capacitive component of the diodes is important for realization of waveform-selective metasurfaces in a higher frequency regime. Second, we report that the operating power level is closely related to the saturation current and the breakdown voltage of the diodes. Moreover, the operating power range is found to be broadened by introducing an additional resistor into the inside of the diode bridge. Our study is expected to provide design guidelines for circuit-based waveform-selective metasurfaces to select/fabricate optimal diodes and enhance the waveform-selective performance at the target frequency and power level.
△ Less
Submitted 25 December, 2022;
originally announced December 2022.
