-
Needle bevel geometry influences the flexural deflection magnitude in ultrasound-enhanced fine-needle biopsy
Authors:
Saif Bunni,
Heikki J. Nieminen
Abstract:
It has been recently demonstrated that use of ultrasound increases the tissue yield in ultrasound-enhanced fine-needle aspiration biopsy (USeFNAB) as compared to conventional fine-needle aspiration biopsy (FNAB). To date, the association between bevel geometry and needle tip action has not been widely explored. In this study, we studied the needle resonance characteristics and deflection magnitude…
▽ More
It has been recently demonstrated that use of ultrasound increases the tissue yield in ultrasound-enhanced fine-needle aspiration biopsy (USeFNAB) as compared to conventional fine-needle aspiration biopsy (FNAB). To date, the association between bevel geometry and needle tip action has not been widely explored. In this study, we studied the needle resonance characteristics and deflection magnitude of various needle bevel geometries with varying bevel lengths. With a conventional lancet, having a 3.9 mm long bevel, the tip deflection efficiency in air and water was 220 and 105 micrometres per Watt, respectively. This was higher in comparison to an axi-symmetric tip, having a bevel length of 4 mm, which achieved a deflection efficiency of 180 and 80 micrometres per Watt in air and water, respectively. This study emphasised the importance of relationship between flexural modulus of bevel geometry in the context of various insertion media and, thus, could provide understanding on approaches to control post-puncture cutting action by modifying the needle bevel geometry, essential for the USeFNAB application.
△ Less
Submitted 19 May, 2022;
originally announced May 2022.
-
Multi-modal transducer-waveguide construct coupled to a medical needle
Authors:
Yohann Le Bourlout,
Gösta Ehnholm,
Heikki J. Nieminen
Abstract:
Annually, more than 16 billion medical needles are consumed worldwide. However, the functions of the medical needle are still limited to cutting and delivering or drawing material through the needle to a target site. Ultrasound combined with hypodermic needle could potentially add value to many medical applications such as pain reduction, adding precision, deflection reduction in tissues and even…
▽ More
Annually, more than 16 billion medical needles are consumed worldwide. However, the functions of the medical needle are still limited to cutting and delivering or drawing material through the needle to a target site. Ultrasound combined with hypodermic needle could potentially add value to many medical applications such as pain reduction, adding precision, deflection reduction in tissues and even improve tissue collection. In this study we introduce a waveguide construct enabling an efficient way to convert a longitudinal wave mode to flexural mode and to couple the converted wave mode to a conventional medial needle, while maintaining high electric-to-acoustic power efficiency. The structural optimization of the waveguide was realized in silico using the finite element method followed by prototyping the construct and experimental characterization of the prototypes. The experiments at 30 kHz demonstrate flexural tip displacement up to 200 μm, at low electrical power consumption (under 5 W), with up to 69% of efficiency. The high electric-to-acoustic efficiency and small size of the transducer would facilitate design of medical needle and biopsy devices, potentially enabling portability, batterization and high patient safety with low electric powers.
△ Less
Submitted 28 March, 2022;
originally announced March 2022.
-
An Ultrasonically Actuated Fine-Needle Creates Cavitation in Bovine Liver
Authors:
Emanuele Perra,
Nick Hayward,
Kenneth P. H. Pritzker,
Heikki J. Nieminen
Abstract:
Ultrasonic cavitation is being used in medical applications as a way to influence matter, such as tissue or drug vehicles, on a micro-scale. Oscillating or collapsing cavitation bubbles provide transient mechanical force fields, which can, e.g., fractionate soft tissue or even disintegrate solid objects such as calculi. Our recent study demonstrates that an ultrasonically actuated medical needle c…
▽ More
Ultrasonic cavitation is being used in medical applications as a way to influence matter, such as tissue or drug vehicles, on a micro-scale. Oscillating or collapsing cavitation bubbles provide transient mechanical force fields, which can, e.g., fractionate soft tissue or even disintegrate solid objects such as calculi. Our recent study demonstrates that an ultrasonically actuated medical needle can create cavitation phenomena inside water. However, the presence and behavior of cavitation and related bioeffects in diagnostic and therapeutic applications with ultrasonically actuated needles are not known. Using simulations, we demonstrate numerically and experimentally the cavitation phenomena near ultrasonically actuated needles. We define the cavitation onset within a liver tissue model with different total acoustic power levels. We directly visualize and quantitatively characterize cavitation events generated by the ultrasonic needle in thin fresh bovine liver sections enabled by high speed imaging. On a qualitative basis, the numerical and experimental results show a close resemblance in threshold and spatial distribution of cavitation. These findings are crucial for developing new methods and technologies employing ultrasonically actuated fine-needles such as ultrasound-enhanced fine-needle biopsy, drug delivery and histotripsy.
△ Less
Submitted 7 July, 2021;
originally announced July 2021.
-
An Ultrasonically Actuated Needle Promotes the Transport of Nanoparticles and Fluids
Authors:
Emanuele Perra,
Nick Hayward,
Kenneth P. H. Pritzker,
Heikki J. Nieminen
Abstract:
Non-invasive therapeutic ultrasound methods, such as high-intensity focused ultrasound (HIFU), have limited access to tissue targets shadowed by bones or presence of gas. This study demonstrates that an ultrasonically actuated medical needle can be used to translate nanoparticles and fluids under the action of nonlinear phenomena, potentially overcoming some limitations of HIFU. A simulation study…
▽ More
Non-invasive therapeutic ultrasound methods, such as high-intensity focused ultrasound (HIFU), have limited access to tissue targets shadowed by bones or presence of gas. This study demonstrates that an ultrasonically actuated medical needle can be used to translate nanoparticles and fluids under the action of nonlinear phenomena, potentially overcoming some limitations of HIFU. A simulation study was first conducted to study the delivery of a tracer with an ultrasonically actuated needle (33 kHz) inside a porous medium acting as a model for soft tissue. The model was then validated experimentally in different concentrations of agarose gel showing a close match with the experimental results, when diluted soot nanoparticles (diameter < 150 nm) were employed as delivered entity. An additional simulation study demonstrated a threefold increase of the volume covered by the delivered agent in liver under a constant injection rate, when compared to without ultrasound. This method, if developed to its full potential, could serve as a cost effective way to improve safety and efficacy of drug therapies by maximizing the concentration of delivered entities within e.g. a small lesion, while minimizing exposure outside the lesion.
△ Less
Submitted 6 July, 2021;
originally announced July 2021.
-
Ultrasonic Actuation of a Fine-Needle Improves Biopsy Yield
Authors:
Emanuele Perra,
Eetu Lampsijärvi,
Gonçalo Barreto,
Muhammad Arif,
Tuomas Puranen,
Edward Hæggström,
Kenneth P. H. Pritzker,
Heikki J. Nieminen
Abstract:
Despite the ubiquitous use over the past 150 years, the functions of the current medical needle are facilitated only by mechanical shear and cutting by the needle tip,i.e.the lancet. In this study, we demonstrate how nonlinear ultrasonics (NLU) extends the functionality of the medical needle far beyond its present capability. The NLU actions were found to be localized to the proximity of the needl…
▽ More
Despite the ubiquitous use over the past 150 years, the functions of the current medical needle are facilitated only by mechanical shear and cutting by the needle tip,i.e.the lancet. In this study, we demonstrate how nonlinear ultrasonics (NLU) extends the functionality of the medical needle far beyond its present capability. The NLU actions were found to be localized to the proximity of the needle tip, the SonoLancet, but the effects extend several millimeters from the physical needle boundary. The observed nonlinear phenomena, transient cavitation, fluid streams, translation of micro- and nanoparticles and atomization, were quantitatively characterized. In the fine-needle biopsy application, the SonoLancet contributed to obtaining tissue cores with increase in tissue yield by 3-6x in different tissue types compared to conventional needle biopsy technique using the same 21G needle. In conclusion, the SonoLancet could be of interest to several other medical applications, including drug or gene delivery, cell modulation, and minimally invasive surgical procedures.
△ Less
Submitted 9 March, 2021; v1 submitted 30 June, 2020;
originally announced June 2020.
-
Modelling aerosol transport and virus exposure with numerical simulations in relation to SARS-CoV-2 transmission by inhalation indoors
Authors:
Ville Vuorinen,
Mia Aarnio,
Mikko Alava,
Ville Alopaeus,
Nina Atanasova,
Mikko Auvinen,
Nallannan Balasubramanian,
Hadi Bordbar,
Panu Erästö,
Rafael Grande,
Nick Hayward,
Antti Hellsten,
Simo Hostikka,
Jyrki Hokkanen,
Ossi Kaario,
Aku Karvinen,
Ilkka Kivistö,
Marko Korhonen,
Risto Kosonen,
Janne Kuusela,
Sami Lestinen,
Erkki Laurila,
Heikki Nieminen,
Petteri Peltonen,
Juho Pokki
, et al. (5 additional authors not shown)
Abstract:
We provide research findings on the physics of aerosol dispersion relevant to the hypothesized aerosol transmission of SARS-CoV-2. We utilize physics-based modeling at different levels of complexity, and literature on coronaviruses, to investigate the possibility of airborne transmission. The previous literature, our 0D-3D simulations by various physics-based models, and theoretical calculations,…
▽ More
We provide research findings on the physics of aerosol dispersion relevant to the hypothesized aerosol transmission of SARS-CoV-2. We utilize physics-based modeling at different levels of complexity, and literature on coronaviruses, to investigate the possibility of airborne transmission. The previous literature, our 0D-3D simulations by various physics-based models, and theoretical calculations, indicate that the typical size range of speech and cough originated droplets (d < 20microns) allows lingering in the air for O(1h) so that they could be inhaled. Consistent with the previous literature, numerical evidence on the rapid drying process of even large droplets, up to sizes O(100microns), into droplet nuclei/aerosols is provided. Based on the literature and the public media sources, we provide evidence that the infected individuals could have been exposed to aerosols/droplet nuclei by inhaling them in significant numbers e.g. O(100). By 3D computational fluid dynamics (CFD) simulations, we give examples on the transport and dilution of aerosols (d<20microns) over distances O(10m) in generic environments. We study susceptible and infected individuals in generic public places by Monte-Carlo modeling. The model accounts for the locally varying aerosol concentration levels which the susceptible accumulate via inhalation. The introduced concept, 'exposure time' to virus containing aerosols is proposed to complement the traditional 'safety distance' thinking. We show that the exposure time to inhale O(100) aerosols could range from O(1s) to O(1min) or even to O(1h) depending on the situation. The Monte Carlo analysis provides clear quantitative insight to the exposure time in different public indoor environments.
△ Less
Submitted 26 May, 2020;
originally announced May 2020.
