-
Laser initiated p-11B fusion reactions in petawatt high-repetition-rates laser facilities
Authors:
M. Scisciò,
G. Petringa,
Z. Zhu,
M. R. D. Rodrigues,
M. Alonzo,
P. L. Andreoli,
F. Filippi,
Fe. Consoli,
M. Huault,
D. Raffestin,
D. Molloy,
H. Larreur,
D. Singappuli,
T. Carriere,
C. Verona,
P. Nicolai,
A. McNamee,
M. Ehret,
E. Filippov,
R. Lera,
J. A. Pérez-Hernández,
S. Agarwal,
M. Krupka,
S. Singh,
V. Istokskaia
, et al. (21 additional authors not shown)
Abstract:
Driving the nuclear fusion reaction p+11B -> 3 alpha + 8.7 MeV in laboratory conditions, by interaction between high-power laser pulses and matter, has become a popular field of research, due to numerous applications that it can potentially allow: an alternative to deuterium-tritium (DT) for fusion energy production, astrophysics studies and alpha-particle generation for medical treatments. A poss…
▽ More
Driving the nuclear fusion reaction p+11B -> 3 alpha + 8.7 MeV in laboratory conditions, by interaction between high-power laser pulses and matter, has become a popular field of research, due to numerous applications that it can potentially allow: an alternative to deuterium-tritium (DT) for fusion energy production, astrophysics studies and alpha-particle generation for medical treatments. A possible scheme for laser-driven p-11B reactions is to direct a beam of laser-accelerated protons onto a boron sample (the so-called 'pitcher-catcher' scheme). This technique was successfully implemented on large, energetic lasers, yielding hundreds of joules per shot at low repetition. We present here a complementary approach, exploiting the high-repetition rate of the VEGA III petawatt laser at CLPU (Spain), aiming at accumulating results from many interactions at much lower energy, for better controlling the parameters and the statistics of the measurements. Despite a moderate energy per pulse, our experiment allowed exploring the laser-driven fusion process with tens (up to hundreds) of laser shots. The experiment provided a clear signature of the produced reactions and of the fusion products, accumulated over many shots, leading to an improved optimization of the diagnostic for these experimental campaigns In this paper we discuss the effectiveness of the laser-driven p-11B fusion in the pitcher-catcher scheme, at high-repetition rate, addressing the challenges of this experimental scheme and highlighting its critical aspects. Our proposed methodologies allow evaluating the performance of this scheme for laser-driven alpha particle production and can be adapted to high-repetition rate laser facilities with higher energy and intensity.
△ Less
Submitted 7 November, 2024;
originally announced November 2024.
-
Radioisotopes production using lasers: from basic science to applications
Authors:
M. R. D. Rodrigues,
A. Bonasera,
M. Scisciò,
J. A. Pérez-Hernández,
M. Ehret,
F. Filippi,
P. L. Andreoli,
M. Huault,
H. Larreur,
D. Singappuli,
D. Molloy,
D. Raffestin,
M. Alonzo,
G. G. Rapisarda,
D. Lattuada,
G. L. Guardo,
C. Verona,
Fe. Consoli,
G. Petringa,
A. McNamee,
M. La Cognata,
S. Palmerini,
T. Carriere,
M. Cipriani,
G. Di Giorgio
, et al. (15 additional authors not shown)
Abstract:
Laser technologies improved after the understanding of the Chirped Pulse Amplification (CPA) which allows energetic laser beams to be compressed to tens of femtosecond (fs) pulse durations and focused to few $μ$m. Protons of tens of MeV can be accelerated using for instance the Target Normal Sheath Acceleration (TNSA) method and focused on secondary targets. In such conditions, nuclear reactions c…
▽ More
Laser technologies improved after the understanding of the Chirped Pulse Amplification (CPA) which allows energetic laser beams to be compressed to tens of femtosecond (fs) pulse durations and focused to few $μ$m. Protons of tens of MeV can be accelerated using for instance the Target Normal Sheath Acceleration (TNSA) method and focused on secondary targets. In such conditions, nuclear reactions can occur and radioisotopes relevant for medical purposes be produced. High repetition lasers can be used to produce enough isotopes for medical applications. This route is competitive to conventional methods mostly based on accelerators. In this paper we study the production of $^{67}$Cu, $^{63}$Zn, $^{18}$F and $^{11}$C currently used in positron emission tomography (PET) and other applications. At the same time, we study the reaction $^{10}$B(p,$α$)$^{7}$Be and $^{70}$Zn(p,4n)$^{67}$Ga to put further constraints to the proton distributions at different angles and to the reaction $^{11}$B(p,$α$)$^{8}$Be relevant for energy production. The experiment was performed at the 1 petawatt (PW) laser facility at Vega III located in Salamanca-Spain. Angular distributions of radioisotopes in the forward (with respect to the laser direction) and backward directions were measured using a High Purity Germanium Detector (HPGE). Our results are reasonably reproduced by the numerical estimates following the approach of Kimura et al. (NIMA637(2011)167)
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Collisionless Shock Acceleration of protons in a plasma slab produced in a gas jet by the collision of two laser-driven hydrodynamic shockwaves
Authors:
J. -R. Marquès,
L. Lancia,
P. Loiseau,
P. Forestier-Colleoni,
M. Tarisien,
E. Atukpor,
V. Bagnoud,
C. Brabetz,
F. Consoli,
J. Domange,
F. Hannachi,
P. Nicolaï,
M. Salvadori,
B. Zielbauer
Abstract:
We recently proposed a new technique of plasma tailoring by laser-driven hydrodynamic shockwaves generated on both sides of a gas jet [J.-R. Marquès et al., Phys. Plasmas 28, 023103 (2021)]. In the continuation of this numerical work, we studied experimentally the influence of the tailoring on proton acceleration driven by a high-intensity picosecond-laser, in three cases: without tailoring, by ta…
▽ More
We recently proposed a new technique of plasma tailoring by laser-driven hydrodynamic shockwaves generated on both sides of a gas jet [J.-R. Marquès et al., Phys. Plasmas 28, 023103 (2021)]. In the continuation of this numerical work, we studied experimentally the influence of the tailoring on proton acceleration driven by a high-intensity picosecond-laser, in three cases: without tailoring, by tailoring only the entrance side of the ps-laser, or both sides of the gas jet. Without tailoring the acceleration is transverse to the laser axis, with a low-energy exponential spectrum, produced by Coulomb explosion. When the front side of the gas jet is tailored, a forward acceleration appears, that is significantly enhanced when both the front and back sides of the plasma are tailored. This forward acceleration produces higher energy protons, with a peaked spectrum, and is in good agreement with the mechanism of Collisionless Shock Acceleration (CSA). The spatio-temporal evolution of the plasma profile was characterized by optical shadowgraphy of a probe beam. The refraction and absorption of this beam was simulated by post-processing 3D hydrodynamic simulations of the plasma tailoring. Comparison with the experimental results allowed to estimate the thickness and near-critical density of the plasma slab produced by tailoring both sides of the gas jet. These parameters are in good agreement with those required for CSA.
△ Less
Submitted 28 September, 2023;
originally announced September 2023.
-
Analysis of a kinetic model for electron heat transport in inertial confinement fusion plasmas
Authors:
A. Chrisment,
P. Loiseau,
J. -L. Feugeas,
P. -E. Masson-Laborde,
J. Mathiaud,
V. Tikhonchuk,
Ph. Nicolaï
Abstract:
To determine the electron heat flux density on macroscopic scales, the most widely used approach is to solve a diffusion equation through a multi-group technique. This method is however restricted to transport induced by temperature gradients without accounting for other sources of fast electrons because the electric field induced by the charge separation is indirectly treated. In addition, signif…
▽ More
To determine the electron heat flux density on macroscopic scales, the most widely used approach is to solve a diffusion equation through a multi-group technique. This method is however restricted to transport induced by temperature gradients without accounting for other sources of fast electrons because the electric field induced by the charge separation is indirectly treated. In addition, significant discrepancies are reported on the underlying distribution function when compared to complete kinetic calculations. These limitations motivate the research for alternative reduced kinetic models. The physical content of one of them is here deepened, its precision improved and the benefit of its usage compared to other models discussed.
△ Less
Submitted 3 May, 2022; v1 submitted 17 February, 2022;
originally announced February 2022.
-
Ion acceleration by an ultrashort laser pulse interacting with a near-critical-density gas jet
Authors:
M. Ehret,
C. Salgado-Lopez,
V. Ospina-Bohorquez,
J. A. Perez-Hernandez,
M. Huault,
M. de Marco,
J. I. Apinaniz,
F. Hannachi,
D. De Luis,
J. Hernandez Toro,
D. Arana,
C. Mendez,
O. Varela,
A. Debayle,
L. Gremillet,
T. -H. Nguyen-Bui,
E. Olivier,
G. Revet,
N. D. Bukharskii,
H. Larreur,
J. Caron,
C. Vlachos,
T. Ceccotti,
D. Raffestin,
P. Nicolai
, et al. (6 additional authors not shown)
Abstract:
We demonstrate laser-driven Helium ion acceleration with cut-off energies above 25 MeV and peaked ion number above $10^8$ /MeV for 22(2) MeV projectiles from near-critical density gas jet targets. We employed shock gas jet nozzles at the high-repetition-rate (HRR) VEGA-2 laser system with 3 J in pulses of 30 fs focused down to intensities in the range between $9\times10^{19}$ W/cm$^2$ and…
▽ More
We demonstrate laser-driven Helium ion acceleration with cut-off energies above 25 MeV and peaked ion number above $10^8$ /MeV for 22(2) MeV projectiles from near-critical density gas jet targets. We employed shock gas jet nozzles at the high-repetition-rate (HRR) VEGA-2 laser system with 3 J in pulses of 30 fs focused down to intensities in the range between $9\times10^{19}$ W/cm$^2$ and $1.2\times10^{20}$ W/cm$^2$. We demonstrate acceleration spectra with minor shot-to-shot changes for small variations in the target gas density profile. Difference in gas profiles arise due to nozzles being exposed to a experimental environment, partially ablating and melting.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
AWBS kinetic modeling of electrons with nonlocal Ohms law in plasmas relevant to inertial confinement fusion
Authors:
M. Holec,
P. Loiseau,
A. Debayle,
J. P. Brodrick,
D. Del Sorbo,
C. P. Ridgers,
V. Tikhonchuk,
J. -L. Feugeas,
Ph. Nicolai,
B. Dubroca,
R. J. Kingham
Abstract:
The interaction of lasers with plasmas very often leads to nonlocal transport conditions, where the classical hydrodynamic model fails to describe important microscopic physics related to highly mobile particles. In this study we analyze and further propose a modification of the Albritton- Williams-Bernstein-Swartz collision operator Phys. Rev. Lett 57, 1887 (1986) for the nonlocal electron transp…
▽ More
The interaction of lasers with plasmas very often leads to nonlocal transport conditions, where the classical hydrodynamic model fails to describe important microscopic physics related to highly mobile particles. In this study we analyze and further propose a modification of the Albritton- Williams-Bernstein-Swartz collision operator Phys. Rev. Lett 57, 1887 (1986) for the nonlocal electron transport under conditions relevant to ICF. The electron distribution function provided by this modification exhibits some very desirable properties when compared to the full Fokker- Planck operator in the local diffusive regime, and also performs very well when benchmarked against Vlasov-Fokker-Planck and collisional PIC codes in the nonlocal transport regime, where we find that the effect of the electric field via the nonlocal Ohms law is an essential ingredient in order to capture the electron kinetics properly.
△ Less
Submitted 22 December, 2018;
originally announced January 2019.
-
Acceleration of collimated 45 MeV protons by collisionless shocks driven in low-density, large-scale gradient plasmas by a 10^20 W/cm^2, 1 micron wavelength laser
Authors:
P. Antici,
E. Boella,
S. N. Chen,
D. S. Andrews,
M. Barberio,
J. Böker,
F. Cardelli,
J. L. Feugeas,
M. Glesser,
P. Nicolaï,
L. Romagnani,
M. Sciscio,
M. Starodubtsev,
O. Willi,
J. C. Kieffer,
V. Tikhonchuk,
H. Pépin,
L. O. Silva,
E. d Humières,
J. Fuchs
Abstract:
A new type of proton acceleration stemming from large-scale gradients, low-density targets, irradiated by an intense near-infrared laser is observed. The produced protons are characterized by high-energies (with a broad spectrum), are emitted in a very directional manner, and the process is associated to relaxed laser (no need for high-contrast) and target (no need for ultra-thin or expensive targ…
▽ More
A new type of proton acceleration stemming from large-scale gradients, low-density targets, irradiated by an intense near-infrared laser is observed. The produced protons are characterized by high-energies (with a broad spectrum), are emitted in a very directional manner, and the process is associated to relaxed laser (no need for high-contrast) and target (no need for ultra-thin or expensive targets) constraints. As such, this process appears quite effective compared to the standard and commonly used Target Normal Sheath Acceleration technique (TNSA), or more exploratory mechanisms like Radiation Pressure Acceleration (RPA). The data are underpinned by 3D numerical simulations which suggest that in these conditions Low Density Collisionless Shock Acceleration (LDCSA) is at play, which combines an initial Collisionless Shock Acceleration (CSA) to a boost procured by a TNSA-like sheath field in the downward density ramp of the target, which leads to an overall broad spectrum. Experiments performed at 10^20 W/cm^2 laser intensity show that LDCSA can accelerate, from ~1% critical density, mm-scale targets, up to 5x10^9 protons/MeV/sr/J with energies up to 45(+/- 5) MeV in a collimated (~6$^\circ$ half-angle) manner.
△ Less
Submitted 8 August, 2017;
originally announced August 2017.
-
Extension of a Reduced Entropic Model of Electron Transport to Magnetized Nonlocal Regimes of High-Energy-Density Plasmas
Authors:
D. Del Sorbo,
J. -L. Feugeas,
Ph. Nicolaï,
M. Olazabal-Loumé,
B. Dubroca,
V. Tikhonchuk
Abstract:
Laser produced high-energy-density plasmas may contain strong magnetic fields that affect the energy transport, which can be nonlocal. Models which describe the magnetized nonlocal transport are formally complicated and based on many approximations. This paper presents a more straightforward approach to the description of the electron transport in this regime, based on the extension of a reduced e…
▽ More
Laser produced high-energy-density plasmas may contain strong magnetic fields that affect the energy transport, which can be nonlocal. Models which describe the magnetized nonlocal transport are formally complicated and based on many approximations. This paper presents a more straightforward approach to the description of the electron transport in this regime, based on the extension of a reduced entropic model. The calculated magnetized heat fluxes are compared with the known asymptotic limits and applied for studying of a magnetized nonocal plasma thermalization.
△ Less
Submitted 13 June, 2017;
originally announced June 2017.
-
Guiding of relativistic electron beams in dense matter by longitudinally imposed strong magnetic fields
Authors:
M. Bailly-Grandvaux,
J. J. Santos,
C. Bellei,
P. Forestier-Colleoni,
S. Fujioka,
L. Giuffrida,
J. J. Honrubia,
D. Batani,
R. Bouillaud,
M. Chevrot,
J. E. Cross,
R. Crowston,
S. Dorard,
J. -L. Dubois,
M. Ehret,
G. Gregori,
S. Hulin,
S. Kojima,
E. Loyez,
J. -R. Marques,
A. Morace,
Ph. Nicolai,
M. Roth,
S. Sakata,
G. Schaumann
, et al. (5 additional authors not shown)
Abstract:
High-energy-density flows through dense matter are needed for effective progress in the production of laser-driven intense sources of energetic particles and radiation, in driving matter to extreme temperatures creating state regimes relevant for planetary or stellar science as yet inaccessible at the laboratory scale, or in achieving high-gain laser-driven thermonuclear fusion. When interacting a…
▽ More
High-energy-density flows through dense matter are needed for effective progress in the production of laser-driven intense sources of energetic particles and radiation, in driving matter to extreme temperatures creating state regimes relevant for planetary or stellar science as yet inaccessible at the laboratory scale, or in achieving high-gain laser-driven thermonuclear fusion. When interacting at the surface of dense (opaque) targets, intense lasers accelerate relativistic electron beams which transport a significant fraction of the laser energy into the target depth. However, the overall laser-to-target coupling efficiency is impaired by the large divergence of the electron beam, intrinsic to the laser-plasma interaction. By imposing a longitudinal 600T laser-driven magnetic-field, our experimental results show guided >10MA-current of MeV-electrons in solid matter. Due to the applied magnetic field, the transported energy-density and the peak background electron temperature at the 60micron-thick targets rear surface rise by factors 5, resulting from unprecedentedly efficient guiding of relativistic electron currents.
△ Less
Submitted 29 August, 2016;
originally announced August 2016.
-
Physics of Giant ElectroMagnetic Pulse generation in short pulse laser experiments
Authors:
Alexandre Poyé,
Sébastien Hulin,
Mathieu Bailly-Grandvaux,
Jean-Luc Dubois,
Jérôme Ribolzi,
Didier Raffestin,
Matthieu Bardon,
Frédéric Lubrano-Lavaderci,
Emmanuel D'Humières,
Joao Jorge Santos,
Philippe Nicolaï,
Vladimir Tikhonchuk
Abstract:
In this paper we describe the physical processes that lead to the generation of Giant Electro- Magnetic Pulses (GEMP) on powerful laser facilities. Our study is based on experimental mea- surements of both the charging of a solid target irradiated by an ultra-short, ultra-intense laser and the detection of the electromagnetic emission in the GHz domain. An unambiguous correlation between the neutr…
▽ More
In this paper we describe the physical processes that lead to the generation of Giant Electro- Magnetic Pulses (GEMP) on powerful laser facilities. Our study is based on experimental mea- surements of both the charging of a solid target irradiated by an ultra-short, ultra-intense laser and the detection of the electromagnetic emission in the GHz domain. An unambiguous correlation between the neutralisation current in the target holder and the electromagnetic emission shows that the source of the GEMP is the remaining positive charge inside the target after the escape of fast electrons accelerated by the ultra-intense laser. A simple model for calculating this charge in the thick target case is presented. From this model and knowing the geometry of the target holder, it becomes possible to estimate the intensity and the dominant frequencies of the GEMP on any facility.
△ Less
Submitted 8 March, 2015;
originally announced March 2015.
-
Laser-driven platform for generation and characterization of strong quasi-static magnetic fields
Authors:
J. J. Santos,
M. Bailly-Grandvaux,
L. Giuffrida,
P. Forestier-Colleoni,
S. Fujioka,
Z. Zhang,
Ph. Korneev,
R. Bouillaud,
S. Dorard,
D. Batani,
M. Chevrot,
J. Cross,
R. Crowston,
J. -L. Dubois,
J. Gazave,
G. Gregori,
E. d'Humières,
S. Hulin,
K. Ishihara,
S. Kojima,
E. Loyez,
J. -R. Marquès,
A. Morace,
Ph. Nicolaï,
O. Peyrusse
, et al. (9 additional authors not shown)
Abstract:
Quasi-static magnetic-fields up to $800\,$T are generated in the interaction of intense laser pulses ($500\,$J, $1\,$ns, $10^{17}\,$W/cm$^2$) with capacitor-coil targets of different materials. The reproducible magnetic-field peak and rise-time, consistent with the laser pulse duration, were accurately inferred from measurements with GHz-bandwidth inductor pickup coils (B-dot probes). Results from…
▽ More
Quasi-static magnetic-fields up to $800\,$T are generated in the interaction of intense laser pulses ($500\,$J, $1\,$ns, $10^{17}\,$W/cm$^2$) with capacitor-coil targets of different materials. The reproducible magnetic-field peak and rise-time, consistent with the laser pulse duration, were accurately inferred from measurements with GHz-bandwidth inductor pickup coils (B-dot probes). Results from Faraday rotation of polarized optical laser light and deflectometry of energetic proton beams are consistent with the B-dot probe measurements at the early stages of the target charging, up to $t\approx 0.35\,$ns, and then are disturbed by radiation and plasma effects. The field has a dipole-like distribution over a characteristic volume of $1\,$mm$^3$, which is coherent with theoretical expectations. These results demonstrate a very efficient conversion of the laser energy into magnetic fields, thus establishing a robust laser-driven platform for reproducible, well characterized, generation of quasi-static magnetic fields at the kT-level, as well as for magnetization and accurate probing of high-energy-density samples driven by secondary powerful laser or particle beams.
△ Less
Submitted 8 June, 2015; v1 submitted 1 March, 2015;
originally announced March 2015.
-
Anomalous Self-Generated Electrostatic Fields in Nanosecond Laser-Plasma Interaction
Authors:
L. Lancia,
M. Grech,
S. Weber,
J. -R. Marquès,
L. Romagnani,
M. Nakatsutsumi,
P. Antici,
A. Bellue,
N. Bourgeois,
J. -L. Feugeas,
T. Grismayer,
T. Lin,
Ph. Nicolaï,
B. Nkonga,
P. Audebert,
R. Kodama,
V. T. Tikhonchuk,
J. Fuchs
Abstract:
Electrostatic (E) fields associated with the interaction of a well-controlled, high-power, nanosecond laser pulse with an underdense plasma are diagnosed by proton radiography. Using a current 3D wave propagation code equipped with nonlinear and nonlocal hydrodynamics, we can model the measured E-fields that are driven by the laser ponderomotive force in the region where the laser undergoes filame…
▽ More
Electrostatic (E) fields associated with the interaction of a well-controlled, high-power, nanosecond laser pulse with an underdense plasma are diagnosed by proton radiography. Using a current 3D wave propagation code equipped with nonlinear and nonlocal hydrodynamics, we can model the measured E-fields that are driven by the laser ponderomotive force in the region where the laser undergoes filamentation. However, strong fields of up to 110 MV/m measured in the first millimeter of propagation cannot be reproduced in the simulations. This could point to the presence of unexpected strong thermal electron pressure gradients possibly linked to ion acoustic turbulence, thus emphasizing the need for the development of full kinetic collisional simulations in order to properly model laser-plasma interaction in these strongly nonlinear conditions.
△ Less
Submitted 4 January, 2011;
originally announced January 2011.
-
Controlling fast electron beam divergence using two laser pulses
Authors:
R. H. H. Scott,
C. Beaucourt,
H. -P. Schlenvoigt,
K. Markey,
K. L. Lancaster,
C. P. Ridgers,
C. M. Brenner,
J. Pasley,
R. J. Gray,
I. O. Musgrave,
A. P. L Robinson,
K. Li,
M. M. Notley,
J. R. Davies,
S. D. Baton,
J. J. Santos,
J. -L. Feugeas,
Ph. Nicolaï,
G. Malka,
V. T. Tikhonchuk,
P. McKenna,
D. Neely,
S. J. Rose,
P. A. Norreys
Abstract:
This paper describes the first experimental demonstration of the guiding of a relativistic electron beam in a solid target using two co-linear, relativistically intense, picosecond laser pulses. The first pulse creates a magnetic field which guides the higher current fast electron beam generated by the second pulse. The effects of intensity ratio, delay, total energy and intrinsic pre-pulse are ex…
▽ More
This paper describes the first experimental demonstration of the guiding of a relativistic electron beam in a solid target using two co-linear, relativistically intense, picosecond laser pulses. The first pulse creates a magnetic field which guides the higher current fast electron beam generated by the second pulse. The effects of intensity ratio, delay, total energy and intrinsic pre-pulse are examined. Thermal and Kα imaging showed reduced emission size, increased peak emission and increased total emission at delays of 4 - 6 ps, an intensity ratio of 10 : 1 (second:first) and a total energy of 186 J. In comparison to a single, high contrast shot, the inferred fast electron divergence is reduced by 2.7 times, while the fast electron current density is increased by a factor of 1.8. The enhancements are reproduced with modelling and are shown to be due to the self-generation of magnetic fields. Such a scheme could be of considerable benefit to fast ignition inertial fusion.
△ Less
Submitted 15 May, 2012; v1 submitted 9 December, 2010;
originally announced December 2010.
