-
Semiconductor-based selective emitter with sharp cutoff for thermophotovoltaic energy conversion
Authors:
Qing Ni,
Rajagopalan Ramesh,
Cheng-An Chen,
Liping Wang
Abstract:
Semiconductor emitter can possibly achieve sharp cutoff wavelength due to its intrinsic bandgap absorption and almost zero sub-bandgap emission without doping. A germanium wafer based selective emitter with front-side antireflection and backside metal coating is studied here for thermophotovoltaic (TPV) energy conversion. Optical simulation predicts the spectral emittance above 0.9 in the waveleng…
▽ More
Semiconductor emitter can possibly achieve sharp cutoff wavelength due to its intrinsic bandgap absorption and almost zero sub-bandgap emission without doping. A germanium wafer based selective emitter with front-side antireflection and backside metal coating is studied here for thermophotovoltaic (TPV) energy conversion. Optical simulation predicts the spectral emittance above 0.9 in the wavelengths from 1 to 1.85 um and below 0.2 in the sub-bandgap range with sharp cutoff around the bandgap, indicating superior spectral selectivity behavior. This is confirmed by excellent agreement with indirectly measured spectral emittance of the fabricated Ge-based selective emitter sample. Furthermore, the TPV efficiency by paring the Ge-based selective emitter with a GaSb cell is theoretically analyzed at different temperatures. This work will facilitate the development of the semiconductor-based selective emitters for enhancing TPV performance.
△ Less
Submitted 24 April, 2021;
originally announced April 2021.
-
Segmental Lennard-Jones Interactions for Semi-flexible Polymer Networks
Authors:
Carlos Floyd,
Aravind Chandrasekaran,
Haoran Ni,
Qin Ni,
Garegin A. Papoian
Abstract:
Simulating soft matter systems such as the cytoskeleton can enable deep understanding of experimentally observed phenomena. One challenge of modeling such systems is realistic description of the steric repulsion between nearby polymers. Previous models of the polymeric excluded volume interaction have the deficit of being non-analytic, being computationally expensive, or allowing polymers to erron…
▽ More
Simulating soft matter systems such as the cytoskeleton can enable deep understanding of experimentally observed phenomena. One challenge of modeling such systems is realistic description of the steric repulsion between nearby polymers. Previous models of the polymeric excluded volume interaction have the deficit of being non-analytic, being computationally expensive, or allowing polymers to erroneously cross each other. A recent solution to these issues, implemented in the MEDYAN simulation platform, uses analytical expressions obtained from integrating an interaction kernel along the lengths of two polymer segments to describe their repulsion. Here, we extend this model by re-deriving it for lower-dimensional geometrical configurations, deriving similar expressions using a steeper interaction kernel, comparing it to other commonly used potentials, and showing how to parameterize these models. We also generalize this new integrated style of potential by introducing a segmental Lennard-Jones potential, which enables modelling both attractive and repulsive interactions in semi-flexible polymer networks. These results can be further generalized to facilitate the development of effective interaction potentials for other finite elements in simulations of soft-matter systems.
△ Less
Submitted 22 June, 2021; v1 submitted 22 February, 2021;
originally announced February 2021.
-
Optoelectronic Analysis of Spectrally Selective Nanophotonic Metafilm Cell for Thermophotovoltaic Energy Conversion
Authors:
Qing Ni,
Payam Sabbaghi,
Liping Wang
Abstract:
This work theoretically explores a spectrally selective TPV cell based on an asymmetric Fabry-Perot resonance cavity structure with sub-100-nm GaSb layer. The simulated spectral property of the ultrathin nanophotonic cell structure exhibits a high absorption peak above the bandgap due to the interference effect with electromagnetic field enhanced inside the GaSb layer between top and bottom silver…
▽ More
This work theoretically explores a spectrally selective TPV cell based on an asymmetric Fabry-Perot resonance cavity structure with sub-100-nm GaSb layer. The simulated spectral property of the ultrathin nanophotonic cell structure exhibits a high absorption peak above the bandgap due to the interference effect with electromagnetic field enhanced inside the GaSb layer between top and bottom silver electrodes, while the sub-bandgap absorption is as low as a few percent because of high reflectivity of the metal. An absorption enhancement nearly 20 times at particular frequency above bandgap is achieved within the sub-100-nm GaSb layer with the nanophotonic cell structure compared to the free-standing one. Besides, a thin layer of MoOx is incorporated into the metafilm cell structure as a hole transport layer to consider the charge collection in practice. With rigorous optoelectronic analysis by considering both radiative and nonradiative recombinations (Shockley-Reed-Hall and Auger), the nanophotonic cell is predicted to achieve a TPV efficiency of 22.8% and output power of 0.62 W/cm2 with a black emitter at 1500 K due to spectrally enhanced in-band absorption and low sub-bandgap absorption. With an ideal selective emitter which is hard to achieve in practice along with thermal stability concerns, the efficiency can be further improved to 28% by eliminating sub-bandgap photons. The proposed spectrally selective nanophotonic metafilm cell could be a viable route to achieve high-efficiency and low-cost TPV energy conversion.
△ Less
Submitted 7 October, 2020;
originally announced October 2020.
-
Near-Field Thermophotovoltaic Energy Conversion with Thin-film Tandem Cells
Authors:
Payam Sabbaghi,
Qing Ni,
Liping Wang
Abstract:
The performance of a near-field thermophotovoltaic system with a tandem-cell structure composed of thin-film p-doped GaSb and n-doped InAs sub-cells on a gold backside reflector is theoretically investigated. The temperatures of the Ga-doped ZnO emitter and the tandem cells are set as 1800 K and 300 K, while the thicknesses of GaSb and InAs sub-cells are considered as 1.5um and 0.5um, respectively…
▽ More
The performance of a near-field thermophotovoltaic system with a tandem-cell structure composed of thin-film p-doped GaSb and n-doped InAs sub-cells on a gold backside reflector is theoretically investigated. The temperatures of the Ga-doped ZnO emitter and the tandem cells are set as 1800 K and 300 K, while the thicknesses of GaSb and InAs sub-cells are considered as 1.5um and 0.5um, respectively. Fluctuational electrodynamics along with the multilayer dyadic Green's function is used to study near-field radiative heat transfer with the consideration of photon chemical potential, whereas radiative recombination and nonradiative Auger recombination are taken into account for evaluating the electrical performance of the tandem cells. At a vacuum gap of 50 nm, it is found that the tandem cells with independent charge collections achieve electrical power output 468.8 kW/m2 at a conversion efficiency of 41%, generating relatively 87% (or 21%) more power with about absolute 5% (or 10%) higher efficiency than the single GaSb (or InAs) cell of the same 2-um thickness. The physical mechanism of near-field spectral heat transfer is elucidated with energy transmission coefficient, while the current-voltage characteristics of sub-cells are discussed in detail. This work will pave the way to enhance near-field thermophotovoltaic energy conversion performance with tandem or multi-junction cells.
△ Less
Submitted 30 July, 2020;
originally announced July 2020.
-
Learning epidemic threshold in complex networks by Convolutional Neural Network
Authors:
Qi Ni,
Jie Kang,
Ming Tang,
Ying Liu,
Yong Zou
Abstract:
Deep learning has taken part in the competition since not long ago to learn and identify phase transitions in physical systems such as many body quantum systems, whose underlying lattice structures are generally regular as they're in euclidean space. Real networks have complex structural features which play a significant role in dynamics in them, and thus the structural and dynamical information o…
▽ More
Deep learning has taken part in the competition since not long ago to learn and identify phase transitions in physical systems such as many body quantum systems, whose underlying lattice structures are generally regular as they're in euclidean space. Real networks have complex structural features which play a significant role in dynamics in them, and thus the structural and dynamical information of complex networks can not be directly learned by existing neural network models. Here we propose a novel and effective framework to learn the epidemic threshold in complex networks by combining the structural and dynamical information into the learning procedure. Considering the strong performance of learning in Euclidean space, Convolutional Neural Network (CNN) is used and, with the help of confusion scheme, we can identify precisely the outbreak threshold of epidemic dynamics. To represent the high dimensional network data set in Euclidean space for CNN, we reduce the dimensionality of a network by using graph representation learning algorithms and discretize the embedded space to convert it into an image-like structure. We then creatively merge the nodal dynamical states with the structural embedding by multi-channel images. In this manner, the proposed model can draw the conclusion from both structural and dynamical information. A large number of simulations show a great performance in both synthetic and empirical network data set. Our end-to-end machine learning framework is robust and universally applicable to complex networks with arbitrary size and topology.
△ Less
Submitted 11 November, 2019;
originally announced November 2019.
-
Machine learning dynamical phase transitions in complex networks
Authors:
Qi Ni,
Ming Tang,
Ying Liu,
Ying-Cheng Lai
Abstract:
In recent years, machine learning has been adopted to complex networks, but most existing works concern about the structural properties. To use machine learning to detect phase transitions and accurately identify the critical transition point associated with dynamical processes on complex networks thus stands out as an open and significant problem. Here we develop a framework combining supervised…
▽ More
In recent years, machine learning has been adopted to complex networks, but most existing works concern about the structural properties. To use machine learning to detect phase transitions and accurately identify the critical transition point associated with dynamical processes on complex networks thus stands out as an open and significant problem. Here we develop a framework combining supervised and unsupervised learning, incorporating proper sampling of training data set. In particular, using epidemic spreading dynamics on complex networks as a paradigmatic setting, we start from supervised learning alone and identify situations that degrade the performance. To overcome the difficulties leads to the idea of exploiting confusion scheme, effectively a combination of supervised and unsupervised learning. We demonstrate that the scheme performs well for identifying phase transitions associated with spreading dynamics on homogeneous networks, but the performance deteriorates for heterogeneous networks. To strive to meet this challenge leads to the realization that sampling the training data set is necessary for heterogeneous networks, and we test two sampling methods: one based on the hub nodes together with their neighbors and another based on k-core of the network. The end result is a general machine learning framework for detecting phase transition and accurately identifying the critical transition point, which is robust, computationally efficient, and universally applicable to complex networks of arbitrary size and topology. Extensive tests using synthetic and empirical networks verify the virtues of the articulated framework, opening the door to exploiting machine learning for understanding, detection, prediction, and control of complex dynamical systems in general.
△ Less
Submitted 11 November, 2019;
originally announced November 2019.
-
Solar Thermal Energy Conversion Enhanced by Selective Metafilm Absorber under Multiple Solar Concentrations at High Temperatures
Authors:
Hassan Alshehri,
Qing Ni,
Sydney Taylor,
Ryan McBurney,
Hao Wang,
Liping Wang
Abstract:
Concentrating solar power, particularly parabolic trough system with solar concentrations less than 50, requires spectrally selective solar absorbers that are thermally stable at high temperatures of 400degC above to achieve high efficiency. In this work, the solar-thermal performance of a selective multilayer metafilm absorber is characterized along with a black absorber for comparison by a lab-s…
▽ More
Concentrating solar power, particularly parabolic trough system with solar concentrations less than 50, requires spectrally selective solar absorbers that are thermally stable at high temperatures of 400degC above to achieve high efficiency. In this work, the solar-thermal performance of a selective multilayer metafilm absorber is characterized along with a black absorber for comparison by a lab-scale experimental setup that measures the steady-state absorber temperature under multiple solar concentrations. Heat transfer analysis is employed to elucidate different heat transfer modes and validate the solar-thermal experiment. Due to the superior spectral selectivity and excellent thermal stability, the metafilm absorber deposited on the cost-effective stainless steel foil could achieve the solar-thermal efficiency 57% at a steady-state temperature of 371degC under 10 suns during the lab-scale experiment with losses, while a highest efficiency of 83% was projected under the same conditions for practical solar thermal applications. The results here will facilitate the research and development of novel solar materials for high-efficiency solar thermal energy conversion.
△ Less
Submitted 25 September, 2019;
originally announced October 2019.
-
Direct observation of nanofabrication influence on the optical properties of single self-assembled InAs/GaAs quantum dots
Authors:
Jin Liu,
Kumarasiri Konthasinghe,
Marcelo Davanco,
John Lawall,
Vikas Anant,
Varun Verma,
Richard Mirin,
Sae Woo Nam,
Jin Dong Song,
Ben Ma,
Ze Sheng Chen,
Hai Qiao Ni,
Zhi Chuan Niu,
Kartik Srinivasan
Abstract:
Single self-assembled InAs/GaAs quantum dots are a promising solid-state quantum technology, with which vacuum Rabi splitting, single-photon-level nonlinearities, and bright, pure, and indistinguishable single-photon generation having been demonstrated. For such achievements, nanofabrication is used to create structures in which the quantum dot preferentially interacts with strongly-confined optic…
▽ More
Single self-assembled InAs/GaAs quantum dots are a promising solid-state quantum technology, with which vacuum Rabi splitting, single-photon-level nonlinearities, and bright, pure, and indistinguishable single-photon generation having been demonstrated. For such achievements, nanofabrication is used to create structures in which the quantum dot preferentially interacts with strongly-confined optical modes. An open question is the extent to which such nanofabrication may also have an adverse influence, through the creation of traps and surface states that could induce blinking, spectral diffusion, and dephasing. Here, we use photoluminescence imaging to locate the positions of single InAs/GaAs quantum dots with respect to alignment marks with < 5 nm uncertainty, allowing us to measure their behavior before and after fabrication. We track the quantum dot emission linewidth and photon statistics as a function of distance from an etched surface, and find that the linewidth is significantly broadened (up to several GHz) for etched surfaces within a couple hundred nanometers of the quantum dot. However, we do not observe appreciable reduction of the quantum dot radiative efficiency due to blinking. We also show that atomic layer deposition can stabilize spectral diffusion of the quantum dot emission, and partially recover its linewidth.
△ Less
Submitted 26 October, 2017;
originally announced October 2017.
-
Effects of shock topology on temperature field in compressible turbulence
Authors:
Qionglin Ni,
Shiyi Chen
Abstract:
Effects of two types of shock topology, namely, small-scale shocklet and large-scale shock wave, on the statistics of temperature in compressible turbulence were investigated by simulations. The shocklet and shock wave are caused by the solenoidal and compressive modes of driven forces, respectively. Hereafter, the related two flows are called as SFT and CFT, respectively. It shows that in SFT the…
▽ More
Effects of two types of shock topology, namely, small-scale shocklet and large-scale shock wave, on the statistics of temperature in compressible turbulence were investigated by simulations. The shocklet and shock wave are caused by the solenoidal and compressive modes of driven forces, respectively. Hereafter, the related two flows are called as SFT and CFT, respectively. It shows that in SFT the temperature spectrum follows the k^-5/3 power law, and the temperature field has "ramp-cliff" structures. By contrast, in CFT the temperature spectrum obeys the k^-2 power law, and the temperature field is dominated by large-scale rarefaction and compression. The power-law exponents for the p.d.f. of large negative dilatation are -2.5 in SFT and -3.5 in CFT, close to theoretical values. For the isentropic assumption of thermodynamic variables, the derivation in SFT grows with the turbulent Mach number (Mt), and for same Mt, the variables in CFT are more anisentropic. The angle statistics shows that the temperature gradient in CFT is preferentially perpendicular to the anisotropic strain rate tensor. It tends to be parallel with the first eigenvector and be orthogonal with the other two eigenvectors. For the cascade of temperature, the temperature variance is increased by the viscous dissipation and the pressure-dilatation, but is decreased by the SGS temperature flux. The statistics of pressure-dilatation proves that the negligible contribution of pressure-dilatation at small scales is due to the cancelations of high values between rarefaction and compression regions. The strongly positive skewness of the p.d.f.s of pressure-dilatation implies that the conversion from kinetic to internal energy through compression is more intense than the opposite process through rarefaction. Furthermore, in SFT the fluctuations of pressure-dilatation approximately follow the Zeman model.
△ Less
Submitted 12 June, 2015;
originally announced June 2015.
-
Compressible turbulent mixing: Effects of Schmidt number
Authors:
Qionglin Ni
Abstract:
We investigated the effects of Schmidt number on passive scalar transport in forced compressible turbulence. In the inertial-convective range the scalar spectrum followed the k^{-5/3} power law. For Sc >> 1, there appeared a k^{-1} power law in the viscous-convective range, while for Sc << 1, a k^{-17/3} power law was identified in the inertial-diffusive range. The scaling constant for the mixed t…
▽ More
We investigated the effects of Schmidt number on passive scalar transport in forced compressible turbulence. In the inertial-convective range the scalar spectrum followed the k^{-5/3} power law. For Sc >> 1, there appeared a k^{-1} power law in the viscous-convective range, while for Sc << 1, a k^{-17/3} power law was identified in the inertial-diffusive range. The scaling constant for the mixed third-order structure function of velocity-scalar increment grew over Sc, and the effect of compressibility made it smaller than the classical 4/3 value. At small amplitudes, the PDF of scalar fluctuations collapsed to the Gaussian distribution, whereas at large amplitudes it decayed more quickly than Gaussian. At large scales, the PDF of scalar increment behaved similarly to that of scalar fluctuation, while at small scales it resembled the PDF of scalar gradient. The scalar dissipation occurring at large magnitudes was found to grow with Sc. Due to low molecular diffusivity, for Sc >> 1, the scalar field rolled up and got mixed sufficiently. However, for Sc << 1, the scalar field lost the small-scale structures by high molecular diffusivity, and retained only the large-scale, cloudlike structures. The spectral densities of scalar advection and dissipation in both Sc >> 1 and Sc << 1 flows followed the k^{-5/3} scaling. This indicated that in compressible turbulence the processes of advection and dissipation except that of scalar-dilatation coupling might defer to the Kolmogorov picture. It then showed that at high wavenumbers, the magnitudes of spectral coherency in both Sc >> 1 and Sc << 1 flows decayed faster than the theoretical prediction of k^{-2/3} for incompressible flows. Finally, the comparison with incompressible results showed that the scalar in compressible turbulence with Sc=1 lacked a conspicuous bump structure in its spectrum, but was more intermittent in the dissipative range.
△ Less
Submitted 17 May, 2015;
originally announced May 2015.
-
A numerical investigation on active and passive scalars in isotropic compressible turbulence
Authors:
Qionglin Ni,
Yipeng Shi,
Shiyi Chen
Abstract:
In this paper, we investigated the statistical differences between active and passive scalars in isotropic compressible turbulence. In the inertial range, the kinetic energy and scalar have the Kolmogorov spectra, and the Kolmogorov and Obukhov-Corrsin constants are 2.06 and 0.87, respectively. The local scaling exponents computed from the second-order structure functions exist plateaus for veloci…
▽ More
In this paper, we investigated the statistical differences between active and passive scalars in isotropic compressible turbulence. In the inertial range, the kinetic energy and scalar have the Kolmogorov spectra, and the Kolmogorov and Obukhov-Corrsin constants are 2.06 and 0.87, respectively. The local scaling exponents computed from the second-order structure functions exist plateaus for velocity and active scalar, while that for passive scalar takes first a minimum of 0.61 then a maximum of 0.73. The mixed third-order structure function of velocity and passive scalar satisfies the 4/3-law. For the scaling exponent, the one of velocity and passive scalar mixing is between those of velocity and passive scalar, while the one of velocity and active scalar mixing is below those of velocity and active scalar. At large amplitudes, the p.d.f. of active scalar fluctuations is super-Gaussian, whereas that of passive scalar fluctuations is sub-Gaussian. Moreover, the p.d.f.s of the two scalar increments are concave and convex shapes, respectively, which exhibit strong intermittency at small scales, and approach Gaussian as scale increases. The active scalar has "ramp-cliff" structures, while the passive scalar seems to be dominated by rarefaction and compression. By employing a "coarse-graining" approach, we study scalar cascades. Unlike passive scalar, the cascade of active scalar is mainly determined by the viscous dissipation at small scales and the pressure-dilatation at large scales, where the latter is substantial in the vicinity of small-scale shocklets but is negligible after space averages, because of the cancelations between rarefaction and compression regions. Finally, in the inertial range, the p.d.f.s for the subgrid-scale fluxes of scalars can collapse to the same distribution, revealing the scale-invariant feature for the statistics of active and passive scalars.
△ Less
Submitted 11 May, 2015;
originally announced May 2015.
-
Development of a Thermal Control System with Mechanically Pumped CO2 Two-Phase Loops for the AMS-02 Tracker on the ISS
Authors:
G. Alberti,
A. Alvino,
G. Ambrosi,
M. Bardet,
R. Battiston,
S. Borsini,
J. F. Cao,
Y. Chen,
J. van Es,
C. Gargiulo,
K. H. Guo,
L. Guo,
Z. H. He,
Z. C. Huang,
V. Koutsenko,
E. Laudi,
A. Lebedev,
S. C. Lee,
T. X. Li,
Y. L. Lin,
S. S. Lv,
M. Menichelli,
J. Y. Miao,
D. C. Mo,
J. Q. Ni
, et al. (15 additional authors not shown)
Abstract:
To provide a stable thermal environment for the AMS-Tracker, a thermal control system based on mechanically pumped CO2 two-phase loops was developed. It has been operating reliably in space since May 19, 2011. In this article, we summarize the design, construction, tests, and performance of the AMS-Tracker thermal control system (AMS-TTCS).
To provide a stable thermal environment for the AMS-Tracker, a thermal control system based on mechanically pumped CO2 two-phase loops was developed. It has been operating reliably in space since May 19, 2011. In this article, we summarize the design, construction, tests, and performance of the AMS-Tracker thermal control system (AMS-TTCS).
△ Less
Submitted 18 February, 2013;
originally announced February 2013.
-
Coherent versus Incoherent Light Scattering from a Quantum Dot
Authors:
K. Konthasinghe,
J. Walker,
M. Peiris,
C. K. Shih,
Y. Yu,
M. F. Li,
J. F. He,
L. J. Wang,
H. Q. Ni,
Z. C. Niu,
A. Muller
Abstract:
We analyze the light scattered by a single InAs quantum dot interacting with a resonant continuous-wave laser. High resolution spectra reveal clear distinctions between coherent and incoherent scattering, with the laser intensity spanning over four orders of magnitude. We find that the fraction of coherently scattered photons can approach unity under sufficiently weak or detuned excitation, ruling…
▽ More
We analyze the light scattered by a single InAs quantum dot interacting with a resonant continuous-wave laser. High resolution spectra reveal clear distinctions between coherent and incoherent scattering, with the laser intensity spanning over four orders of magnitude. We find that the fraction of coherently scattered photons can approach unity under sufficiently weak or detuned excitation, ruling out pure dephasing as a relevant decoherence mechanism. We show how spectral diffusion shapes spectra, correlation functions, and phase-coherence, concealing the ideal radiatively-broadened two-level system described by Mollow.
△ Less
Submitted 20 June, 2012;
originally announced June 2012.