Showing 1–22 of 22 results for author: Newell, D

Fractal-like star-mesh transformations using graphene quantum Hall arrays

Authors: Dominick S. Scaletta, Swapnil M. Mhatre, Ngoc Thanh Mai Tran, Cheng-Hsueh Yang, Heather M. Hill, Yanfei Yang, Linli Meng, Alireza R. Panna, Shamith U. Payagala, Randolph E. Elmquist, Dean G. Jarrett, David B. Newell, Albert F. Rigosi

Abstract: A mathematical approach is adopted for optimizing the number of total device elements required for obtaining high effective quantized resistances in graphene-based quantum Hall array devices. This work explores an analytical extension to the use of star-mesh transformations such that fractal-like, or recursive, device designs can yield high enough resistances (like 1 EΩ, arguably the highest resis… ▽ More A mathematical approach is adopted for optimizing the number of total device elements required for obtaining high effective quantized resistances in graphene-based quantum Hall array devices. This work explores an analytical extension to the use of star-mesh transformations such that fractal-like, or recursive, device designs can yield high enough resistances (like 1 EΩ, arguably the highest resistance with meaningful applicability) while still being feasible to build with modern fabrication techniques. Epitaxial graphene elements are tested, whose quantized Hall resistance at the nu=2 plateau (R_H = 12906.4 Ω) becomes the building block for larger effective, quantized resistances. It is demonstrated that, mathematically, one would not need more than 200 elements to achieve the highest pertinent resistances △ Less

Submitted 27 September, 2023; originally announced September 2023.

Roadmap towards the redefinition of the second

Authors: N. Dimarcq, M. Gertsvolf, G. Mileti, S. Bize, C. W. Oates, E. Peik, D. Calonico, T. Ido, P. Tavella, F. Meynadier, G. Petit, G. Panfilo, J. Bartholomew, P. Defraigne, E. A. Donley, P. O. Hedekvist, I. Sesia, M. Wouters, P. Dube, F. Fang, F. Levi, J. Lodewyck, H. S. Margolis, D. Newell, S. Slyusarev , et al. (12 additional authors not shown)

Abstract: This paper outlines the roadmap towards the redefinition of the second, which was recently updated by the CCTF Task Force created by the CCTF in 2020. The main achievements and the open challenges related to the status of the optical frequency standards, their contribution to time scales and UTC, the possibility of their comparison and the knowledge of the Earth's gravitational potential at the ne… ▽ More This paper outlines the roadmap towards the redefinition of the second, which was recently updated by the CCTF Task Force created by the CCTF in 2020. The main achievements and the open challenges related to the status of the optical frequency standards, their contribution to time scales and UTC, the possibility of their comparison and the knowledge of the Earth's gravitational potential at the necessary level of uncertainty are discussed. In addition, the mandatory criteria to be achieved before redefinition and their current fulfilment level, together with the redefinition options based on a single or on a set of transitions are described. △ Less

Submitted 26 July, 2023; originally announced July 2023.

Comments: 26 pages. This paper is based on the work of a CCTF Task Force on the roadmap to the redefinition of the second

Journal ref: Metrologia 61 012001 (2024)

Conception of an enhanced mechanism for a new Kibble balance directly traceable to the quantum SI

Authors: Lorenz Keck, Frank Seifert, David Newell, Stephan Schlamminger, Rene Thesk, Darine Haddad

Abstract: The ``Quantum Electro-Mechanical Metrology Suite'' (QEMMS) is being designed and built at the National Institute of Standards and Technology. It includes a Kibble balance, a Graphene quantum Hall resistance array and a Josephson voltage system, so that it is a new primary standard for the unit of mass, the kilogram, directly traceable to the International System of Units (SI) based on quantum cons… ▽ More The ``Quantum Electro-Mechanical Metrology Suite'' (QEMMS) is being designed and built at the National Institute of Standards and Technology. It includes a Kibble balance, a Graphene quantum Hall resistance array and a Josephson voltage system, so that it is a new primary standard for the unit of mass, the kilogram, directly traceable to the International System of Units (SI) based on quantum constants. We are targeting a measurement range of 10 g to 200 g and optimize the design for a relative combined uncertainty of $2\times 10^{-8}$ for masses of 100 g. QEMMS will be developed as an open hardware and software design. In this article, we explain the design of the moving and weighing mechanism in the QEMMS. △ Less

Submitted 24 June, 2022; originally announced June 2022.

Comments: 18 pages, 17 figures, accepted for publication in EPJ Techniques and Instrumentation 2022

Design of electrostatic feedback for an experiment to measure $G$

Authors: Stephan Schlamminger, Leon Chao, Vincent Lee, David B. Newell, Clive C. Speake

Abstract: The torsion pendulum at the heart of the apparatus to measure the gravitational constant, $G$ at the Bureau International des Poids et Mesures (BIPM) is used to measure the gravitational torque between source and test-mass assemblies with two methods. In the Cavendish method, the pendulum moves freely. In the electrostatic-servo method, the pendulum is maintained at a constant angle by applying an… ▽ More The torsion pendulum at the heart of the apparatus to measure the gravitational constant, $G$ at the Bureau International des Poids et Mesures (BIPM) is used to measure the gravitational torque between source and test-mass assemblies with two methods. In the Cavendish method, the pendulum moves freely. In the electrostatic-servo method, the pendulum is maintained at a constant angle by applying an electrostatic torque equal and opposite to any gravitational torque on the pendulum. The electrostatic torque is generated by a servo. This article describes the design and implementation of this servo at the National Institute of Standards and Technology. We use a digital servo loop with a Kalman filter to achieve measurement performance comparable to the one in an open loop. We show that it is possible to achieve small measurement uncertainty with an experiment that uses three electrodes for feedback control. △ Less

Submitted 8 June, 2022; originally announced June 2022.

Comments: 10 pages, 12 figures

Analysis of Raman and Ellipsometric Responses of Nb$_{x}$W$_{1-x}$Se$_{2}$ alloys

Authors: Albert F. Rigosi, Heather M. Hill, Sergiy Krylyuk, Nhan V. Nguyen, Angela R. Hight Walker, Albert V. Davydov, David B. Newell

Abstract: The growth of transition metal dichalcogenide (TMDC) alloys provides an opportunity to experimentally access information elucidating how optical properties change with gradual substitutions in the lattice compared with their pure compositions. In this work, we performed growths of alloyed crystals with stoichiometric compositions between pure forms of NbSe2 and WSe2, followed by an optical analysi… ▽ More The growth of transition metal dichalcogenide (TMDC) alloys provides an opportunity to experimentally access information elucidating how optical properties change with gradual substitutions in the lattice compared with their pure compositions. In this work, we performed growths of alloyed crystals with stoichiometric compositions between pure forms of NbSe2 and WSe2, followed by an optical analysis of those alloys by utilizing Raman spectroscopy and spectroscopic ellipsometry. △ Less

Submitted 24 December, 2021; originally announced December 2021.

Chiral transport of hot carriers in graphene in the quantum Hall regime

Authors: Bin Cao, Tobias Grass, Olivier Gazzano, Kishan Ashokbhai Patel, Jiuning Hu, Markus Müller, Tobias Huber, Luca Anzi, Kenji Watanabe, Takashi Taniguchi, David Newell, Michael Gullans, Roman Sordan, Mohammad Hafezi, Glenn Solomon

Abstract: Photocurrent (PC) measurements can reveal the relaxation dynamics of photo-excited hot carriers beyond the linear response of conventional transport experiments, a regime important for carrier multiplication. In graphene subject to a magnetic field, PC measurements are able to probe the existence of Landau levels with different edge chiralities which is exclusive to relativistic electron systems.… ▽ More Photocurrent (PC) measurements can reveal the relaxation dynamics of photo-excited hot carriers beyond the linear response of conventional transport experiments, a regime important for carrier multiplication. In graphene subject to a magnetic field, PC measurements are able to probe the existence of Landau levels with different edge chiralities which is exclusive to relativistic electron systems. Here, we report the accurate measurement of PC in graphene in the quantum Hall regime. Prominent PC oscillations as a function of gate voltage on samples' edges are observed. These oscillation amplitudes form an envelope which depends on the strength of the magnetic field, as does the PCs' power dependence and their saturation behavior. We explain these experimental observations through a model using optical Bloch equations, incorporating relaxations through acoustic-, optical- phonons and Coulomb interactions. The simulated PC agrees with our experimental results, leading to a unified understanding of the chiral PC in graphene at various magnetic field strengths, and providing hints for the occurrence of a sizable carrier multiplication. △ Less

Submitted 3 October, 2021; originally announced October 2021.

Comments: 14 pages, 13 figures

Journal ref: ACS Nano 2022

Resolution of the paradox of the diamagnetic effect on the Kibble coil

Authors: Shisong Li, Stephan Schlamminger, Rafael Marangoni, Qing Wang, Darine Haddad, Frank Seifert, Leon Chao, David Newell, Wei Zhao

Abstract: Employing very simple electro-mechanical principles known from classical physics, the Kibble balance establishes a very precise and absolute link between quantum electrical standards and macroscopic mass or force measurements. The success of the Kibble balance, in both determining fundamental constants ($h$, $N_A$, $e$) and realizing a quasi-quantum mass in the 2019 newly revised International Sys… ▽ More Employing very simple electro-mechanical principles known from classical physics, the Kibble balance establishes a very precise and absolute link between quantum electrical standards and macroscopic mass or force measurements. The success of the Kibble balance, in both determining fundamental constants ($h$, $N_A$, $e$) and realizing a quasi-quantum mass in the 2019 newly revised International System of Units, relies on the perfection of Maxwell's equations and the symmetry they describe between Lorentz's force and Faraday's induction, a principle and a symmetry stunningly demonstrated in the weighing and velocity modes of Kibble balances to within $1\times10^{-8}$, with nothing but imperfect wires and magnets. However, recent advances in the understanding of the current effect in Kibble balances reveal a troubling paradox. A diamagnetic effect, a force that does not cancel between mass-on and mass-off measurement, is challenging balance maker's assumptions of symmetry at levels that are almost two orders of magnitude larger than the reported uncertainties. The diamagnetic effect, if it exists, shows up in weighing mode without a readily apparent reciprocal effect in the velocity mode, begging questions about systematic errors at the very foundation of the new measurement system. The hypothetical force is caused by the coil current changing the magnetic field, producing an unaccounted force that is systematically modulated with the weighing current. Here we show that this diamagnetic force exists, but the additional force does not change the equivalence between weighing and velocity measurements. We reveal the unexpected way that symmetry is preserved and show that for typical materials and geometries the total relative effect on the measurement is $\approx 1\times10^{-9}$. △ Less

Submitted 6 January, 2021; originally announced January 2021.

Comments: Accepted for publication in Scientific Reports

Magnet system for the Quantum Electro-Mechanical Metrology Suite

Authors: Rafael R. Marangoni, Darine Haddad, Frank Seifert, Leon S. Chao, David B. Newell, Stephan Schlamminger

Abstract: The design of the permanent magnet system for the new Quantum Electro-Mechanical Metrology Suite (QEMMS) is described. The QEMMS, developed at the National Institute of Standards and Technology (NIST), consists of a Kibble balance, a programmable Josephson voltage standard, and a quantum Hall resistance standard. It will be used to measure masses up to $100\,\mathrm{g}$ with relative uncertainties… ▽ More The design of the permanent magnet system for the new Quantum Electro-Mechanical Metrology Suite (QEMMS) is described. The QEMMS, developed at the National Institute of Standards and Technology (NIST), consists of a Kibble balance, a programmable Josephson voltage standard, and a quantum Hall resistance standard. It will be used to measure masses up to $100\,\mathrm{g}$ with relative uncertainties below $2\times 10^{-8}$. The magnet system is based on the design of the NIST-4 magnet system with significant changes to adopt to a smaller Kibble balance and to overcome known practical limitations. Analytical models are provided to describe the coil-current effect and model the forces required to split the magnet in two parts to install the coil. Both models are compared to simulation results obtained with finite element analysis and measurement results. Other aspects, such as the coil design and flatness of $Bl$ profile are considered. △ Less

Submitted 26 December, 2019; v1 submitted 10 December, 2019; originally announced December 2019.

Comments: 9 pages, 12 figures, published in IEEE Trans. Instrum. Meas

The Performance of the KIBB-g1 Tabletop Kibble Balance at NIST

Authors: Leon Chao, Frank Seifert, Darine Haddad, Jon Pratt, David Newell, Stephan Schlamminger

Abstract: A tabletop-sized Kibble balance (KIBB-g1) designed to directly realize mass at the gram-level range with uncertainties on the order of parts in 10$^6$ has been developed at the National Institute of Standards and Technology (NIST). The masses of a nominally 5\,g and 1\,g weight were determined with 1-$σ$ standard uncertainties of 9.0\,$\upmu$g and 6.7\,$\upmu$g, respectively. The corresponding rel… ▽ More A tabletop-sized Kibble balance (KIBB-g1) designed to directly realize mass at the gram-level range with uncertainties on the order of parts in 10$^6$ has been developed at the National Institute of Standards and Technology (NIST). The masses of a nominally 5\,g and 1\,g weight were determined with 1-$σ$ standard uncertainties of 9.0\,$\upmu$g and 6.7\,$\upmu$g, respectively. The corresponding relative uncertainties are $1.8\times 10^{-6}$ and $6.3\times 10^{-6}$. The construction of the instrument, capabilities, and full uncertainty budgets are presented in this manuscript. △ Less

Submitted 21 October, 2019; originally announced October 2019.

Comments: 10 pages 12 figures; submitted to metrologia

Observation of chiral photocurrent transport in the quantum Hall regime in graphene

Authors: Olivier Gazzano, Bin Cao, Jiuning Hu, Tobias Huber, Tobias Grass, Michael Gullans, David Newell, Mohammad Hafezi, Glenn S. Solomon

Abstract: Optical excitation provides a powerful tool to investigate non-equilibrium physics in quantum Hall systems. Moreover, the length scale associated with photo-excited charge carries lies between that of local probes and global transport measurements. Here, we investigate non-equilibrium physics of optically-excited charge carriers in graphene through photocurrent measurements in the integer quantum… ▽ More Optical excitation provides a powerful tool to investigate non-equilibrium physics in quantum Hall systems. Moreover, the length scale associated with photo-excited charge carries lies between that of local probes and global transport measurements. Here, we investigate non-equilibrium physics of optically-excited charge carriers in graphene through photocurrent measurements in the integer quantum Hall regime. We observe that the photocurrent oscillates as a function of Fermi level, revealing the Landau-level quantization, and that the photocurrent oscillations are different for Fermi levels near and distant from the Dirac point. Our observation qualitatively agrees with a model that assumes the photocurrent is dominated by chiral edge transport of non-equilibrium carriers. Our experimental results are consistent with electron and hole chiralities being the same when the Fermi level is distant from the Dirac point, and opposite when near the Dirac point. △ Less

Submitted 4 March, 2019; originally announced March 2019.

Confocal laser scanning microscopy: A tool for rapid optical characterization of 2D materials

Authors: Vishal Panchal, Yanfei Yang, Guangjun Cheng, Jiuning Hu, Mattias Kruskopf, Chieh-I Liu, Albert F. Rigosi, Christos Melios, Angela R. Hight Walker, David B. Newell, Olga Kazakova, Randolph E. Elmquist

Abstract: Confocal laser scanning microscopy (CLSM) is a non-destructive, highly-efficient optical characterization method for large-area analysis of graphene on different substrates, which can be applied in ambient air, does not require additional sample preparation, and is insusceptible to surface charging and surface contamination. CLSM leverages optical properties of graphene and provides greatly enhanc… ▽ More Confocal laser scanning microscopy (CLSM) is a non-destructive, highly-efficient optical characterization method for large-area analysis of graphene on different substrates, which can be applied in ambient air, does not require additional sample preparation, and is insusceptible to surface charging and surface contamination. CLSM leverages optical properties of graphene and provides greatly enhanced optical contrast and mapping of thickness down to a single layer. We demonstrate the effectiveness of CLSM by measuring mechanically exfoliated and chemical vapor deposition graphene on Si/SiO2, and epitaxial graphene on SiC. In the case of graphene on Si/SiO2, both CLSM intensity and height mapping is powerful for analysis of 1-5 layers of graphene. For epitaxial graphene on SiC substrates, the CLSM intensity allows us to distinguish features such as dense, parallel 150 nm wide ribbons of graphene (associated with the early stages of the growth process) and large regions covered by the interfacial layer and 1-3 layers of graphene. In both cases, CLSM data shows excellent correlation with conventional optical microscopy, atomic force microscopy, Kelvin probe force microscopy, conductive atomic force microscopy, scanning electron microscopy and Raman mapping, with a greatly reduced acquisition time. We demonstrate that CLSM is an indispensable tool for rapid analysis of mass-produced graphene and is equally relevant to other 2D materials. △ Less

Submitted 12 April, 2018; originally announced April 2018.

Comments: 4 Figures

Rapid characterization of wafer-scale 2D material: Epitaxial graphene and graphene nanoribbons on SiC

Authors: Vishal Panchal, Yanfei Yang, Guangjun Cheng, Jiuning Hu, Chieh-I Liu, Albert F. Rigosi, Christos Melios, Olga Kazakova, Angela R. Hight Walker, David B. Newell, Randolph E. Elmquist

Abstract: We demonstrate that the confocal laser scanning microscopy (CLSM) provides a non-destructive, highly-efficient characterization method for large-area epitaxial graphene and graphene nanostructures on SiC substrates, which can be applied in ambient air without sample preparation and is insusceptible to surface charging or surface contamination. Based on the variation of reflected intensity from reg… ▽ More We demonstrate that the confocal laser scanning microscopy (CLSM) provides a non-destructive, highly-efficient characterization method for large-area epitaxial graphene and graphene nanostructures on SiC substrates, which can be applied in ambient air without sample preparation and is insusceptible to surface charging or surface contamination. Based on the variation of reflected intensity from regions covered by interfacial layer, single layer, bilayer, or few layer graphene, and through the correlation to the results from Raman spectroscopy and SPM, CLSM images with a high resolution (around 150 nm) reveal that the intensity contrast has distinct feature for undergrown graphene (mixing of dense, parallel graphene nanoribbons and interfacial layer), continuous graphene, and overgrown graphene. Moreover, CLSM has a real acquisition time hundreds of times faster per unit area than the supplementary characterization methods. We believe that the confocal laser scanning microscope will be an indispensable tool for mass-produced epitaxial graphene or applicable 2D materials. △ Less

Submitted 9 November, 2017; originally announced November 2017.

Measurement of the Planck constant at the National Institute of Standards and Technology from 2015 to 2017

Authors: D. Haddad, F. Seifert, L. S. Chao, A. Possolo, D. B. Newell, J. R. Pratt, C. J. Williams, S. Schlamminger

Abstract: Researchers at the National Institute of Standards and Technology(NIST) have measured the value of the Planck constant to be $h =6.626\,069\,934(89)\times 10^{-34}\,$J$\,$s (relative standard uncertainty $13\times 10^{-9}$). The result is based on over 10$\,$000 weighings of masses with nominal values ranging from 0.5$\,$kg to 2$\,$kg with the Kibble balance NIST-4. The uncertainty has been reduce… ▽ More Researchers at the National Institute of Standards and Technology(NIST) have measured the value of the Planck constant to be $h =6.626\,069\,934(89)\times 10^{-34}\,$J$\,$s (relative standard uncertainty $13\times 10^{-9}$). The result is based on over 10$\,$000 weighings of masses with nominal values ranging from 0.5$\,$kg to 2$\,$kg with the Kibble balance NIST-4. The uncertainty has been reduced by more than twofold relative to a previous determination because of three factors: (1) a much larger data set than previously available, allowing a more realistic, and smaller, Type A evaluation; (2) a more comprehensive measurement of the back action of the weighing current on the magnet by weighing masses up to 2$\,$kg, decreasing the uncertainty associated with magnet non-linearity; (3) a rigorous investigation of the dependence of the geometric factor on the coil velocity reducing the uncertainty assigned to time-dependent leakage of current in the coil. △ Less

Submitted 8 August, 2017; originally announced August 2017.

Comments: 11 pages 5 figures, published in metrologia

Journal ref: Metrologia 54 (2017) 633-641; http://iopscience.iop.org/article/10.1088/1681-7575/aa7bf2

"What is The SI?" A Proposal for an Educational Adjunct to the SI Redefinition

Authors: Neil M. Zimmerman, David B. Newell

Abstract: We discuss how the likely 2018 redefinition of the SI system of units might affect the ability of students to understand the link between the units and the new system. The likely redefinition will no longer define a set of base units, but rather a set of constants of nature, such as the speed of light c and a particular hyperfine splitting in Cs $Δν(^{133}$Cs)$_{hfs}$. We point out that this list… ▽ More We discuss how the likely 2018 redefinition of the SI system of units might affect the ability of students to understand the link between the units and the new system. The likely redefinition will no longer define a set of base units, but rather a set of constants of nature, such as the speed of light c and a particular hyperfine splitting in Cs $Δν(^{133}$Cs)$_{hfs}$. We point out that this list of constants need not be the only way to introduce students to the subject, either in class or in textbooks. We suggest an alternative way to introduce high school and undergraduate students to the redefined SI, by suggesting a list of experiments for some units; this list would be completely compatible with the redefined SI, and would have all of the same scientific and technological advantages. We demonstrate by questionnaire results that this alternative is more appealing to students. We hope to spur a discussion amongst teachers regarding this important topic for high school and undergraduate physics courses. △ Less

Submitted 16 November, 2016; originally announced November 2016.

Comments: 12 pages 5 figures

CODATA Recommended Values of the Fundamental Physical Constants: 2014

Authors: Peter J. Mohr, David B. Newell, Barry N. Taylor

Abstract: This report gives the 2014 self-consistent set of values of the constants and conversion factors of physics and chemistry recommended by the Committee on Data for Science and Technology (CODATA). These values are based on a least-squares adjustment that takes into account all data available up to 31 December 2014. The recommended values may also be found on the World Wide Web at physics.nist.gov/c… ▽ More This report gives the 2014 self-consistent set of values of the constants and conversion factors of physics and chemistry recommended by the Committee on Data for Science and Technology (CODATA). These values are based on a least-squares adjustment that takes into account all data available up to 31 December 2014. The recommended values may also be found on the World Wide Web at physics.nist.gov/constants. △ Less

Submitted 21 July, 2015; originally announced July 2015.

Comments: 11 pages, 8 tables

First measurements of the flux integral with the NIST-4 watt balance

Authors: D. Haddad, F. Seifert, L. S. Chao, A. Cao, G. Sineriz, J. R. Pratt, D. B. Newell, S. Schlamminger

Abstract: In early 2014, construction of a new watt balance, named NIST-4, has started at the National Institute of Standards and Technology (NIST). In a watt balance, the gravitational force of an unknown mass is compensated by an electromagnetic force produced by a coil in a magnet system. The electromagnetic force depends on the current in the coil and the magnetic flux integral. Most watt balances featu… ▽ More In early 2014, construction of a new watt balance, named NIST-4, has started at the National Institute of Standards and Technology (NIST). In a watt balance, the gravitational force of an unknown mass is compensated by an electromagnetic force produced by a coil in a magnet system. The electromagnetic force depends on the current in the coil and the magnetic flux integral. Most watt balances feature an additional calibration mode, referred to as velocity mode, which allows one to measure the magnetic flux integral to high precision. In this article we describe first measurements of the flux integral in the new watt balance. We introduce measurement and data analysis techniques to assess the quality of the measurements and the adverse effects of vibrations on the instrument. △ Less

Submitted 16 March, 2015; originally announced March 2015.

Comments: 7 pages, 8 figures, accepted for publication in IEEE Trans. Instrum. Meas. This Journal can be found online at http://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=19

A summary of the Planck constant measurements using a watt balance with a superconducting solenoid at NIST

Authors: S. Schlamminger, R. L. Steiner, D. Haddad, D. B. Newell, F. Seifert, L. S. Chao, R. Liu, E. R. Williams, J. R. Pratt

Abstract: Researchers at the National Institute of Standards and Technology have been using a watt balance, NIST-3, to measure the Planck constant $h$ for over ten years. Two recently published values disagree by more than one standard uncertainty. The motivation for the present manuscript is twofold. First, we correct the latest published number to take into account a recently discovered systematic error i… ▽ More Researchers at the National Institute of Standards and Technology have been using a watt balance, NIST-3, to measure the Planck constant $h$ for over ten years. Two recently published values disagree by more than one standard uncertainty. The motivation for the present manuscript is twofold. First, we correct the latest published number to take into account a recently discovered systematic error in mass dissemination at the Bureau International des Poids et Mesures (BIPM). Second, we provide guidance on how to combine the two numbers into one final result. In order to adequately reflect the discrepancy, we added an additional systematic uncertainty to the published uncertainty budgets. The final value of $h$ measured with NIST-3 is $h = 6.626\,069\,36(37)\times 10^{-34}\,\mbox{J\,s}$. This result is $77(57) \times 10^{-9}$ fractionally higher than $h_{\mathrm{90}}$. Each number in parentheses gives the value of the standard uncertainty in the last two digits of the respective value and $h_{\mathrm{90}}$ is the conventional value of the Planck constant given by $h_{\mathrm{90}}\equiv 4 /( K_{\mathrm{J-90}}^2 R_{\mathrm{K-90}})$, where $K_{\mathrm{J-90}}$ and $R_{\mathrm{K-90}}$ denote the conventional values of the Josephson and von Klitzing constants, respectively. △ Less

Submitted 27 January, 2015; originally announced January 2015.

Comments: 3 pages 2 figures. Accepted by metrologia. Link to the Journal Homepage: http://iopscience.iop.org/0026-1394

A determination of the local acceleration of gravity for the NIST-4 watt balance

Authors: E. J. Leaman, D. Haddad, F. Seifert, L. S. Chao, A. Cao, J. R. Pratt, S. Schlamminger, D. B. Newell

Abstract: A new watt balance is being constructed at the National Institute of Standards and Technology (NIST) in preparation for the redefinition of the International System of Units and the realization of mass through an exact value of the Planck constant. The total relative uncertainty goal for this instrument of a few parts in $10^{8}$ requires that the local acceleration due to gravity be known at the… ▽ More A new watt balance is being constructed at the National Institute of Standards and Technology (NIST) in preparation for the redefinition of the International System of Units and the realization of mass through an exact value of the Planck constant. The total relative uncertainty goal for this instrument of a few parts in $10^{8}$ requires that the local acceleration due to gravity be known at the location of a test mass with a relative uncertainty on the order of only a few parts in $10^{9}$. To make this determination, both the horizontal and vertical gradients of gravity must be known such that gravity may be tied from an absolute reference in the laboratory to the precise mass location. We describe the procedures used to model and measure gravity variations throughout the laboratory and give our results. △ Less

Submitted 12 December, 2014; originally announced December 2014.

Comments: 7 pages, 10 figures, accepted for publication in IEEE Trans. Instrum. Meas. It will appear at http://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=19

A LEGO Watt Balance: An apparatus to determine a mass based on the new SI

Authors: L. S. Chao, S. Schlamminger, D. B. Newell, J. R. Pratt, F. Seifert, X. Zhang, G. Sineriz, M. Liu, D. Haddad

Abstract: A global effort to redefine our International System of Units (SI) is underway and the change to the new system is expected to occur in 2018. Within the newly redefined SI, the present base units will still exist but be derived from fixed numerical values of seven reference constants. More specifically, the unit of mass, the kilogram, will be realized through a fixed value of the Planck constant… ▽ More A global effort to redefine our International System of Units (SI) is underway and the change to the new system is expected to occur in 2018. Within the newly redefined SI, the present base units will still exist but be derived from fixed numerical values of seven reference constants. More specifically, the unit of mass, the kilogram, will be realized through a fixed value of the Planck constant $h$. For instance, a watt balance can be used to realize the kilogram unit of mass within a few parts in $10^8$. Such a balance has been designed and constructed at the National Institute of Standards and Technology. For educational outreach and to demonstrate the principle, we have constructed a LEGO tabletop watt balance capable of measuring a gram size mass to 1 % relative uncertainty. This article presents the design, construction, and performance of the LEGO watt balance and its ability to determine $h$ △ Less

Submitted 7 August, 2015; v1 submitted 4 December, 2014; originally announced December 2014.

Comments: Edited parts list, alternative circuit diagram. 12 pages, 7 figures. Also included is a partlist to build your own LEGO watt balance. The article has been submitted to American Journal of Physics. After it is published, it will be found at http://scitation.aip.org/content/aapt/journal/ajp

Determination of the Planck constant using a watt balance with a superconducting magnet system at the National Institute of Standards and Technology

Authors: Stephan Schlamminger, Darine Haddad, Frank Seifert, Leon S Chao, David B Newell, Ruimin Liu, Richard L Steiner, Jon R Pratt

Abstract: For the past two years, measurements have been performed with a watt balance at the National Institute of Standards and Technology (NIST) to determine the Planck constant. A detailed analysis of these measurements and their uncertainties has led to the value $h=6.626\,069\,79(30)\times 10^{-34}\,$J$\,$s. The relative standard uncertainty is $ 45\times 10^{-9}$. This result is $141\times 10^{-9}$ f… ▽ More For the past two years, measurements have been performed with a watt balance at the National Institute of Standards and Technology (NIST) to determine the Planck constant. A detailed analysis of these measurements and their uncertainties has led to the value $h=6.626\,069\,79(30)\times 10^{-34}\,$J$\,$s. The relative standard uncertainty is $ 45\times 10^{-9}$. This result is $141\times 10^{-9}$ fractionally higher than $h_{90}$. Here $h_{90}$ is the conventional value of the Planck constant given by $h_{90}\equiv 4 /( K_{\mathrm{J-90}}^2R_{\mathrm{K-90}})$, where $K_{\mathrm{J-90}}$ and $R_{\mathrm{K-90}}$ denote the conventional values of the Josephson and von Klitzing constants, respectively. △ Less

Submitted 24 April, 2014; v1 submitted 31 January, 2014; originally announced January 2014.

Comments: 22 pages, 8 figures, published in metrologia

Journal ref: Metrologia 51, S15 (2014)

CODATA Recommended Values of the Fundamental Physical Constants: 2010

Authors: Peter J. Mohr, Barry N. Taylor, David B. Newell

Abstract: This paper gives the 2010 self-consistent set of values of the basic constants and conversion factors of physics and chemistry recommended by the Committee on Data for Science and Technology (CODATA) for international use. The 2010 adjustment takes into account the data considered in the 2006 adjustment as well as the data that became available from 1 January 2007, after the closing date of that a… ▽ More This paper gives the 2010 self-consistent set of values of the basic constants and conversion factors of physics and chemistry recommended by the Committee on Data for Science and Technology (CODATA) for international use. The 2010 adjustment takes into account the data considered in the 2006 adjustment as well as the data that became available from 1 January 2007, after the closing date of that adjustment, until 31 December 2010, the closing date of the new adjustment. Further, it describes in detail the adjustment of the values of the constants, including the selection of the final set of input data based on the results of least-squares analyses. The 2010 set replaces the previously recommended 2006 CODATA set and may also be found on the World Wide Web at physics.nist.gov/constants. △ Less

Submitted 24 March, 2012; originally announced March 2012.

Comments: 94 pages, 8 figures, 48 tables

Journal ref: Rev. Mod. Phys. 84, 1527-1605 (2012)

CODATA Recommended Values of the Fundamental Physical Constants: 2006

Authors: Peter J. Mohr, Barry N. Taylor, David B. Newell

Abstract: This paper gives the 2006 self-consistent set of the basic constants and conversion factors of physics and chemistry recommended by the Committee on Data for Science and Technology (CODATA) for international use. Further, it describes in detail the adjustment of the values of the constants, including the selection of the final set of input data based on the results of least-squares analyses. The… ▽ More This paper gives the 2006 self-consistent set of the basic constants and conversion factors of physics and chemistry recommended by the Committee on Data for Science and Technology (CODATA) for international use. Further, it describes in detail the adjustment of the values of the constants, including the selection of the final set of input data based on the results of least-squares analyses. The 2006 adjustment takes into account the data considered in the 2002 adjustment as well as the data that became available between 31 December 2002, the closing date of that adjustment, and 31 December 2006, the closing date of the new adjustment. The new data have led to a significant reduction in the uncertainties of many recommended values. The 2006 set replaces the previously recommended 2002 CODATA set and also may be found on the World Wide Web at physics.nist.gov/constants. △ Less

Submitted 28 December, 2007; originally announced January 2008.

Comments: 105 pages, 7 figures, 46 tables; describes in detail the 2006 CODATA adjustment of the values of the constants

Journal ref: Rev.Mod.Phys.80:633-730,2008