-
High-Stability Single-Ion Clock with $5.5\times10^{-19}$ Systematic Uncertainty
Authors:
Mason C. Marshall,
Daniel A. Rodriguez Castillo,
Willa J. Arthur-Dworschack,
Alexander Aeppli,
Kyungtae Kim,
Dahyeon Lee,
William Warfield,
Joost Hinrichs,
Nicholas V. Nardelli,
Tara M. Fortier,
Jun Ye,
David R. Leibrandt,
David B. Hume
Abstract:
We report a single-ion optical atomic clock with fractional frequency uncertainty of $5.5\times10^{-19}$ and fractional frequency stability of $3.5 \times10^{-16}/\sqrt{τ/\mathrm{s}}$, based on quantum logic spectroscopy of a single $^{27}$Al$^+$ ion. A co-trapped $^{25}$Mg$^+$ ion provides sympathetic cooling and quantum logic readout of the $^{27}$Al$^+$ $^1$S$_0\leftrightarrow^3$P$_0$ clock tra…
▽ More
We report a single-ion optical atomic clock with fractional frequency uncertainty of $5.5\times10^{-19}$ and fractional frequency stability of $3.5 \times10^{-16}/\sqrt{τ/\mathrm{s}}$, based on quantum logic spectroscopy of a single $^{27}$Al$^+$ ion. A co-trapped $^{25}$Mg$^+$ ion provides sympathetic cooling and quantum logic readout of the $^{27}$Al$^+$ $^1$S$_0\leftrightarrow^3$P$_0$ clock transition. A Rabi probe duration of 1 s, enabled by laser stability transfer from a remote cryogenic silicon cavity across a 3.6 km fiber link, results in a threefold reduction in instability compared to previous $^{27}$Al$^+$ clocks. Systematic uncertainties are lower due to an improved ion trap electrical design, which reduces excess micromotion, and a new vacuum system, which reduces collisional shifts. We also perform a direction-sensitive measurement of the ac magnetic field due to the RF ion trap, eliminating systematic uncertainty due to field orientation.
△ Less
Submitted 17 April, 2025;
originally announced April 2025.
-
Analysis of Preheat Propagation in MagLIF-like Plasmas
Authors:
Fernando Garcia-Rubio,
Scott Davidson,
C. Leland Ellison,
Nathan B. Meezan,
Douglas S. Miller,
Nantas Nardelli,
Adam Reyes,
Paul F. Schmit,
Hardeep Sullan
Abstract:
The preheating and pre-magnetization of fusion fuel are key features in Magnetized Liner Inertial Fusion (MagLIF) configurations. Typically, the energy of the preheat laser is deposited in a central region of the fuel and propagates outward, generating magneto-hydrodynamic structures that impact the fuel mass distribution and magnetic flux compression during the subsequent implosion. We present a…
▽ More
The preheating and pre-magnetization of fusion fuel are key features in Magnetized Liner Inertial Fusion (MagLIF) configurations. Typically, the energy of the preheat laser is deposited in a central region of the fuel and propagates outward, generating magneto-hydrodynamic structures that impact the fuel mass distribution and magnetic flux compression during the subsequent implosion. We present a theoretical analysis of preheat propagation in a magnetized plasma under conditions typical for MagLIF. The analysis is based on the acoustic time scale for the propagation of pressure disturbances being much shorter than the conductive time scale for heat diffusion. In this regime, the preheat-driven expansion induces the stratification of the fuel and magnetic field, which accumulate in a dense outer shelf bounded by the leading shock. We derive self-similar solutions of the model that describe the hydrodynamic profiles of the expansion, and evaluate the evolution of the magnetic field in this configuration. These solutions are supported by FLASH simulations of preheat propagation. Our analysis shows that, asymptotically in time, the regions where the magnetization of the fuel is significant tend to become localized at the interface separating the outer shelf from the inner hot core. We assess the implications of this stratification on the magnetic flux conservation and performance of fully integrated MagLIF FLASH simulations.
△ Less
Submitted 1 May, 2025; v1 submitted 15 April, 2025;
originally announced April 2025.
-
Validation of FLASH for magnetically driven inertial confinement fusion target design
Authors:
C. Leland Ellison,
Jonathan Carroll-Nellenback,
Chiatai Chen,
Scott Davidson,
Bryan Ferguson,
Fernando Garcia-Rubio,
Edward C. Hansen,
Yannick de Jong,
Jacob R King,
Patrick Knapp,
Keith LeChien,
Anthony Link,
Nathan B. Meezan,
Douglas S. Miller,
Philip Mocz,
Kassie Moczulski,
Nantas Nardelli,
Adam Reyes,
Paul F. Schmit,
Hardeep Sullan,
Petros Tzeferacos,
Daan van Vugt,
Alex B. Zylstra
Abstract:
FLASH is a widely available radiation magnetohydrodynamics code used for astrophysics, laboratory plasma science, high energy density physics, and inertial confinement fusion. Increasing interest in magnetically driven inertial confinement fusion (ICF), including Pacific Fusion's development of a 60 MA Demonstration System designed to achieve facility gain, motivates the improvement and validation…
▽ More
FLASH is a widely available radiation magnetohydrodynamics code used for astrophysics, laboratory plasma science, high energy density physics, and inertial confinement fusion. Increasing interest in magnetically driven inertial confinement fusion (ICF), including Pacific Fusion's development of a 60 MA Demonstration System designed to achieve facility gain, motivates the improvement and validation of FLASH for modeling magnetically driven ICF concepts, such as MagLIF, at ignition scale. Here we present a collection of six validation benchmarks from experiments at the Z Pulsed Power Facility and theoretical and simulation studies of scaling MagLIF to high currents. The benchmarks range in complexity from focused experiments of linear hydrodynamic instabilities to fully integrated MagLIF fusion experiments. With the latest addition of physics capabilities, FLASH now obtains good agreement with the experimental data, theoretical results, and leading ICF target design simulation code results across all six benchmarks. These results establish confidence in FLASH as a useful tool for designing magnetically driven ICF targets on facilities like Z and Pacific Fusion's upcoming Demonstration System.
△ Less
Submitted 14 April, 2025;
originally announced April 2025.
-
Affordable, manageable, practical, and scalable (AMPS) high-yield and high-gain inertial fusion
Authors:
Andrew Alexander,
Laura Robin Benedetti,
Indrani Bhattacharyya,
Jared Bowen,
June Cabatu,
Virgil Cacdac,
Chhavi Chhavi,
Chiatai Chen,
Karen Chen,
Dan Clark,
Jerry Clark,
Tyler Cope,
Will Dannemann,
Scott Davidson,
David DeHaan,
John Dugan,
Mindy Eihusen,
C. Leland Ellison,
Carlos Esquivel,
David Ethridge,
Blake Ferguson,
Bryan Ferguson,
Jon Fry,
Fernando Garcia-Rubio,
Tarun Goyal
, et al. (41 additional authors not shown)
Abstract:
High-yield inertial fusion offers a transformative path to affordable clean firm power and advanced defense capabilities. Recent milestones at large facilities, particularly the National Ignition Facility (NIF), have demonstrated the feasibility of ignition but highlight the need for approaches that can deliver large amounts of energy to fusion targets at much higher efficiency and lower cost. We…
▽ More
High-yield inertial fusion offers a transformative path to affordable clean firm power and advanced defense capabilities. Recent milestones at large facilities, particularly the National Ignition Facility (NIF), have demonstrated the feasibility of ignition but highlight the need for approaches that can deliver large amounts of energy to fusion targets at much higher efficiency and lower cost. We propose that pulser-driven inertial fusion energy (IFE), which uses high-current pulsed-power technology to compress targets to thermonuclear conditions, can achieve this goal. In this paper, we detail the physics basis for pulser IFE, focusing on magnetized liner inertial fusion (MagLIF), where cylindrical metal liners compress DT fuel under strong magnetic fields and pre-heat. We discuss how the low implosion velocities, direct-drive efficiency, and scalable pulser architecture can achieve ignition-level conditions at low capital cost. Our multi-dimensional simulations, benchmarked against experiments at the Z facility, show that scaling from 20 MA to 50-60 MA of current enables net facility gain. We then introduce our Demonstration System (DS), a pulsed-power driver designed to deliver more than 60 MA and store approximately 80 MJ of energy. The DS is designed to achieve a 1000x increase in effective performance compared to the NIF, delivering approximately 100x greater facility-level energy gain -- and importantly, achieving net facility gain, or Qf>1 -- at just 1/10 the capital cost. We also examine the engineering requirements for repetitive operation, target fabrication, and chamber maintenance, highlighting a practical roadmap to commercial power plants.
△ Less
Submitted 14 April, 2025;
originally announced April 2025.
-
Radio Frequency from Optical with Instabilities below $10^{-15}$- Generation and Measurement
Authors:
A. Hati,
M. Pomponio,
N. V. Nardelli,
T. Grogan,
K. Kim,
D. Lee,
J. Ye,
T. M. Fortier,
A. Ludlow,
C. W. Nelson
Abstract:
This paper presents a frequency synthesis that achieves exceptional stability by transferring optical signals to the radio frequency (RF) domain at 100 MHz. We describe and characterize two synthesis chains composed of a cryogenic silicon cavity-stabilized laser at 1542 nm and an ultra-low expansion (ULE) glass cavity at 1157 nm, both converted to 10 GHz signals via Ti:Sapphire and Er/Yb:glass opt…
▽ More
This paper presents a frequency synthesis that achieves exceptional stability by transferring optical signals to the radio frequency (RF) domain at 100 MHz. We describe and characterize two synthesis chains composed of a cryogenic silicon cavity-stabilized laser at 1542 nm and an ultra-low expansion (ULE) glass cavity at 1157 nm, both converted to 10 GHz signals via Ti:Sapphire and Er/Yb:glass optical frequency combs (OFCs). The 10 GHz microwave outputs are further divided down to 100 MHz using a commercial microwave prescaler, which exhibits a residual frequency instability of $σ_y(1~\text{s})<10^{-15}$ and low $10^{-18}$ level at a few thousand seconds. Measurements are performed using a newly developed custom ultra-low-noise digital measurement system and are compared to the carrier-suppression technique. The new system enables high-sensitivity evaluation across the entire synthesis chain, from the optical and microwave heterodynes as well as the direct RF signals. Results show an absolute instability of $σ_y(1~\text{s})~\approx~4.7\times10^{-16}$ at 100 MHz. This represents the first demonstration of such low instability at 100 MHz, corresponding to a phase noise of -140 dBc/Hz at a 1 Hz offset and significantly surpassing earlier systems. These advancements open new opportunities for precision metrology and timing systems.
△ Less
Submitted 7 March, 2025;
originally announced March 2025.
-
Cryogenic sapphire optical reference cavity with crystalline coatings at $\mathrm{ 1 \times 10^{-16}}$ fractional instability
Authors:
Jose Valencia,
George Iskander,
Nicholas V. Nardelli,
David R. Leibrandt,
David B. Hume
Abstract:
The frequency stability of a laser locked to an optical reference cavity is fundamentally limited by thermal noise in the cavity length. These fluctuations are linked to material dissipation, which depends both on the temperature of the optical components and the material properties. Here, the design and experimental characterization of a sapphire optical cavity operated at 10 K with crystalline c…
▽ More
The frequency stability of a laser locked to an optical reference cavity is fundamentally limited by thermal noise in the cavity length. These fluctuations are linked to material dissipation, which depends both on the temperature of the optical components and the material properties. Here, the design and experimental characterization of a sapphire optical cavity operated at 10 K with crystalline coatings at 1069 nm is presented. Theoretical estimates of the thermo-mechanical noise indicate a thermal noise floor below $\mathrm{4.5\times10^{-18}}$. Major technical noise contributions including vibrations, temperature fluctuations, and residual amplitude modulation are characterized in detail. The short-term performance is measured via a three-cornered hat analysis with two other cavity-stabilized lasers, yielding a noise floor of $1\times10^{-16}$. The long-term performance is measured against an optical lattice clock, indicating cavity stability at the level of $2\times10^{-15}$ for averaging times up to 10,000 s.
△ Less
Submitted 22 April, 2024;
originally announced April 2024.
-
Optical and microwave metrology at the 10-18 level with an Er/Yb:glass frequency comb
Authors:
Nicholas V. Nardelli,
Holly Leopardi,
Thomas R. Schibli,
Tara M. Fortier
Abstract:
Optical frequency combs are an essential tool for precision metrology experiments ranging in application from remote spectroscopic sensing of trace gases to the characterization and comparison of optical atomic clocks for precision time-keeping and searches for physics beyond the standard model. Here we describe the architecture and fully characterize a telecom-band, self-modelocking frequency com…
▽ More
Optical frequency combs are an essential tool for precision metrology experiments ranging in application from remote spectroscopic sensing of trace gases to the characterization and comparison of optical atomic clocks for precision time-keeping and searches for physics beyond the standard model. Here we describe the architecture and fully characterize a telecom-band, self-modelocking frequency comb based on a free-space laser with an Er/Yb co-doped glass gain medium. The laser provides a robust and cost-effective alternative to Er:fiber laser based frequency combs, while offering stability and noise performance similar to Ti:sapphire laser systems. Finally, we demonstrate the Er/Yb:glass frequency comb's utility in high-stability frequency synthesis using two ultra-stable optical references at 1157 nm and 1070 nm and in low-noise photonic microwave generation by dividing these references to the microwave domain.
△ Less
Submitted 26 August, 2022;
originally announced August 2022.
-
10 GHz Generation with Ultra-Low Phase Noise via the Transfer Oscillator Technique
Authors:
Nicholas V. Nardelli,
Tara M. Fortier,
Marco Pomponio,
Esther Baumann,
Craig Nelson,
Thomas R. Schibli,
Archita Hati
Abstract:
Coherent frequency division of high-stability optical sources permits the extraction of microwave signals with ultra-low phase noise, enabling their application to systems with stringent timing precision. To date, the highest performance systems have required tight phase stabilization of laboratory grade optical frequency combs to Fabry-Perot optical reference cavities for faithful optical-to-micr…
▽ More
Coherent frequency division of high-stability optical sources permits the extraction of microwave signals with ultra-low phase noise, enabling their application to systems with stringent timing precision. To date, the highest performance systems have required tight phase stabilization of laboratory grade optical frequency combs to Fabry-Perot optical reference cavities for faithful optical-to-microwave frequency division. This requirement limits the technology to highly-controlled laboratory environments. Here, we employ a transfer oscillator technique, which employs digital and RF analog electronics to coherently suppress additive optical frequency comb noise. This relaxes the stabilization requirements and allows for the extraction of multiple independent microwave outputs from a single comb, while at the same time, permitting low-noise microwave generation from combs with higher noise profiles. Using this method we transferred the phase stability of two high-Finesse optical sources at 1157 nm and 1070 nm to two independent 10 GHz signals using a single frequency comb. We demonstrated absolute phase noise below -106 dBc/Hz at 1-Hz from carrier with corresponding 1 second fractional frequency instability below $2\times10^{-15}$. Finally, the latter phase noise levels were attainable for comb linewidths broadened up to 2 MHz, demonstrating the potential for out-of lab use with low SWaP lasers.
△ Less
Submitted 1 October, 2021;
originally announced October 2021.
-
Optical coherence between atomic species at the second scale: improved clock comparisons via differential spectroscopy
Authors:
May E. Kim,
William F. McGrew,
Nicholas V. Nardelli,
Ethan R. Clements,
Youssef S. Hassan,
Xiaogang Zhang,
Jose L. Valencia,
Holly Leopardi,
David B. Hume,
Tara M. Fortier,
Andrw D. Ludlow,
David R. Leibrandt
Abstract:
Comparisons of high-accuracy optical atomic clocks \cite{Ludlow2015} are essential for precision tests of fundamental physics \cite{Safronova2018}, relativistic geodesy \cite{McGrew2018, Grotti2018, Delva2019}, and the anticipated redefinition of the SI second \cite{Riehle2018}. The scientific reach of these applications is restricted by the statistical precision of interspecies comparison measure…
▽ More
Comparisons of high-accuracy optical atomic clocks \cite{Ludlow2015} are essential for precision tests of fundamental physics \cite{Safronova2018}, relativistic geodesy \cite{McGrew2018, Grotti2018, Delva2019}, and the anticipated redefinition of the SI second \cite{Riehle2018}. The scientific reach of these applications is restricted by the statistical precision of interspecies comparison measurements. The instability of individual clocks is limited by the finite coherence time of the optical local oscillator (OLO), which bounds the maximum atomic interrogation time. In this letter, we experimentally demonstrate differential spectroscopy \cite{Hume2016}, a comparison protocol that enables interrogating beyond the OLO coherence time. By phase-coherently linking a zero-dead-time (ZDT) \cite{Schioppo2017} Yb optical lattice clock with an Al$^+$ single-ion clock via an optical frequency comb and performing synchronised Ramsey spectroscopy, we show an improvement in comparison instability relative to our previous result \cite{network2020frequency} of nearly an order of magnitude. To our knowledge, this result represents the most stable interspecies clock comparison to date.
△ Less
Submitted 24 November, 2021; v1 submitted 20 September, 2021;
originally announced September 2021.
