-
Integrated sub-terahertz cavity electro-optic transduction
Authors:
Kevin K. S. Multani,
Jason F. Herrmann,
Emilio A. Nanni,
Amir H. Safavi-Naeini
Abstract:
Emerging communications and computing technologies will rely ever-more on expanding the useful radio frequency (RF) spectrum into the sub-THz and THz frequency range. Both classical and quantum applications would benefit from advancing integration and incorporation of sub-THz and electro-optic technologies into common devices, such as modulators. Here we demonstrate an integrated triply-resonant,…
▽ More
Emerging communications and computing technologies will rely ever-more on expanding the useful radio frequency (RF) spectrum into the sub-THz and THz frequency range. Both classical and quantum applications would benefit from advancing integration and incorporation of sub-THz and electro-optic technologies into common devices, such as modulators. Here we demonstrate an integrated triply-resonant, superconducting electro-optic transducer. Our design incorporates an on-chip $107$ GHz sub-THz niobium titanium nitride superconducting resonator, modulating a thin-film lithium niobate optical racetrack resonator operating at telecom wavelengths. We observe a maximum photon transduction efficiency of $η_{\text{OE}}\approx 0.82\times 10^{-6}$ and an average single-photon electro-optic interaction rate of $g_0/2π\approx 0.7$ kHz. We also present a study and analysis of the challenges associated with the design of integrated sub-THz resonators and propose possible solutions to these challenges. Our work paves the way for further advancements in resonant electro-optic technologies operating at sub-THz frequencies.
△ Less
Submitted 2 April, 2025;
originally announced April 2025.
-
The Linear Collider Facility (LCF) at CERN
Authors:
H. Abramowicz,
E. Adli,
F. Alharthi,
M. Almanza-Soto,
M. M. Altakach,
S Ampudia Castelazo,
D. Angal-Kalinin,
R. B. Appleby,
O. Apsimon,
A. Arbey,
O. Arquero,
D. Attié,
J. L. Avila-Jimenez,
H. Baer,
Y. Bai,
C. Balazs,
T Barklow,
J. Baudot,
P. Bechtle,
T. Behnke,
A. B. Bellerive,
S. Belomestnykh,
Y. Benhammou,
J. Berenguer-Antequera,
M. Berger
, et al. (359 additional authors not shown)
Abstract:
In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive pr…
▽ More
In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive programme to study the Higgs boson and its closest relatives with high precision requires data at centre-of-mass energies from the Z pole to at least 1 TeV. It should include measurements of the Higgs boson in both major production mechanisms, ee -> ZH and ee -> vvH, precision measurements of gauge boson interactions as well as of the W boson, Higgs boson and top-quark masses, measurement of the top-quark Yukawa coupling through ee ->ttH, measurement of the Higgs boson self-coupling through HH production, and precision measurements of the electroweak couplings of the top quark. In addition, ee collisions offer discovery potential for new particles complementary to HL-LHC.
△ Less
Submitted 31 March, 2025;
originally announced March 2025.
-
ESPPU INPUT: C$^3$ within the "Linear Collider Vision"
Authors:
Matthew B. Andorf,
Mei Bai,
Pushpalatha Bhat,
Valery Borzenets,
Martin Breidenbach,
Sridhara Dasu,
Ankur Dhar,
Tristan du Pree,
Lindsey Gray,
Spencer Gessner,
Ryan Herbst,
Andrew Haase,
Erik Jongewaard,
Dongsung Kim,
Anoop Nagesh Koushik,
Anatoly K. Krasnykh,
Zenghai Li,
Chao Liu,
Jared Maxson,
Julian Merrick,
Sophia L. Morton,
Emilio A. Nanni,
Alireza Nassiri,
Cho-Kuen Ng,
Dimitrios Ntounis
, et al. (12 additional authors not shown)
Abstract:
The Linear Collider Vision calls for a Linear Collider Facility with a physics reach from a Higgs Factory to the TeV-scale with $e^+e^{-}$ collisions. One of the technologies under consideration for the accelerator is a cold-copper distributed-coupling linac capable of achieving high gradient. This technology is being pursued by the C$^3$ collaboration to understand its applicability to future col…
▽ More
The Linear Collider Vision calls for a Linear Collider Facility with a physics reach from a Higgs Factory to the TeV-scale with $e^+e^{-}$ collisions. One of the technologies under consideration for the accelerator is a cold-copper distributed-coupling linac capable of achieving high gradient. This technology is being pursued by the C$^3$ collaboration to understand its applicability to future colliders and broader scientific applications. In this input we share the baseline parameters for a C$^3$ Higgs-factory and the energy reach of up to 3 TeV in the 33 km tunnel foreseen under the Linear Collider Vision. Recent results, near-term plans and future R\&D needs are highlighted.
△ Less
Submitted 6 April, 2025; v1 submitted 26 March, 2025;
originally announced March 2025.
-
A Linear Collider Vision for the Future of Particle Physics
Authors:
H. Abramowicz,
E. Adli,
F. Alharthi,
M. Almanza-Soto,
M. M. Altakach,
S Ampudia Castelazo,
D. Angal-Kalinin,
R. B. Appleby,
O. Apsimon,
A. Arbey,
O. Arquero,
A. Aryshev,
S. Asai,
D. Attié,
J. L. Avila-Jimenez,
H. Baer,
J. A. Bagger,
Y. Bai,
I. R. Bailey,
C. Balazs,
T Barklow,
J. Baudot,
P. Bechtle,
T. Behnke,
A. B. Bellerive
, et al. (391 additional authors not shown)
Abstract:
In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much…
▽ More
In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much higher energies and/or luminosities. In addition, we will discuss detectors and alternative collider modes, as well as opportunities for beyond-collider experiments and R\&D facilities as part of a linear collider facility (LCF). The material of this paper will support all plans for $e^+e^-$ linear colliders and additional opportunities they offer, independently of technology choice or proposed site, as well as R\&D for advanced accelerator technologies. This joint perspective on the physics goals, early technologies and upgrade strategies has been developed by the LCVision team based on an initial discussion at LCWS2024 in Tokyo and a follow-up at the LCVision Community Event at CERN in January 2025. It heavily builds on decades of achievements of the global linear collider community, in particular in the context of CLIC and ILC.
△ Less
Submitted 31 March, 2025; v1 submitted 25 March, 2025;
originally announced March 2025.
-
Direct RF Sampling based LLRF Control System for C-band Linear Accelerator
Authors:
C. Liu,
R. Herbst,
B. Hong,
L. Ruckman,
E. A. Nanni
Abstract:
Low Level RF (LLRF) control systems of linear accelerators (LINACs) are typically implemented with heterodyne based architectures, which have complex analog RF mixers for up and down conversion. The Gen 3 Radio Frequency System-on-Chip (RFSoC) device from AMD Xilinx integrates data converters with maximum RF frequency of 6~GHz. This enables direct RF sampling of C-band LLRF signal typically operat…
▽ More
Low Level RF (LLRF) control systems of linear accelerators (LINACs) are typically implemented with heterodyne based architectures, which have complex analog RF mixers for up and down conversion. The Gen 3 Radio Frequency System-on-Chip (RFSoC) device from AMD Xilinx integrates data converters with maximum RF frequency of 6~GHz. This enables direct RF sampling of C-band LLRF signal typically operated at 5.712 GHz without any analogue mixers, which can significantly simplify the system architecture. The data converters sample RF signals in higher order Nyquist zones and then up or down convert digitally by the integrated data path in RFSoC. The closed-loop feedback control firmware implemented in FPGA integrated in RFSoC can process the base-band signal from the ADC data path and calculate the updated phase and amplitude to be up-mixed by the DAC data path. We have developed a C-band LLRF control RFSoC platform with direct RF sampling, which targets Cool Copper Collider (C3) and other C or S band LINAC research and development projects. In this paper, the architecture of the platform will be described. We have optimized the configuration of the data converter and characterized performance of them with RF pulses. The test results for some of the key performance parameters for the LLRF platform with our custom solid-state amplifier, such as phase and amplitude stability, will be discussed in this paper.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Luminosity and Beam-Induced Background Studies for the Cool Copper Collider
Authors:
Dimitrios Ntounis,
Emilio Alessandro Nanni,
Caterina Vernieri
Abstract:
A high-energy electron-positron collider has been widely recognized by the particle physics community to be the next crucial step for detailed studies of the Higgs boson and other fundamental particles and processes. Several proposals for such colliders, either linear or circular, are currently under evaluation. Any such collider will be required to reach high lumimosities, in order to collect eno…
▽ More
A high-energy electron-positron collider has been widely recognized by the particle physics community to be the next crucial step for detailed studies of the Higgs boson and other fundamental particles and processes. Several proposals for such colliders, either linear or circular, are currently under evaluation. Any such collider will be required to reach high lumimosities, in order to collect enough data at a reasonable time scale, while at the same time coping with high rates of background particles produced from beam-beam interactions during the collisions. In this paper, we analyze the luminosity and beam-beam interaction characteristics of the Cool Copper Collider (C$^3$) and perform a comparison with other linear collider proposals. We conclude that C$^3$ can reach the same or higher collision rates as the other proposals, without having to cope with higher beam-induced background fluxes. Thus, C$^3$ emerges as an attractive option for a future electron-positron collider, benefiting from the collective advancements in beam delivery and final focus system technologies developed by other linear collider initiatives.
△ Less
Submitted 24 May, 2024; v1 submitted 11 March, 2024;
originally announced March 2024.
-
Utilization of Additive Manufacturing for the Rapid Prototyping of C-Band RF Loads
Authors:
Garrett Mathesen,
Charlotte Wehner,
Julian Merrick,
Bradley Shirley,
Ronald Agustsson,
Robert Berry,
Amirari Diego,
Emilio A. Nanni
Abstract:
Additive manufacturing is a versatile technique that shows promise in providing quick and dynamic manufacturing for complex engineering problems. Research has been ongoing into the use of additive manufacturing for potential applications in radiofrequency (RF) component technologies. Here we present a method for developing an effective prototype load produced out of 316L stainless steel on a direc…
▽ More
Additive manufacturing is a versatile technique that shows promise in providing quick and dynamic manufacturing for complex engineering problems. Research has been ongoing into the use of additive manufacturing for potential applications in radiofrequency (RF) component technologies. Here we present a method for developing an effective prototype load produced out of 316L stainless steel on a direct metal laser sintering machine. The model was tested within simulation software to verify the validity of the design. The load structure was manufactured utilizing an online digital manufacturing company, showing the viability of using easily accessible tools to manufacture RF structures. The produced load was able to produce an S$_{11}$ value of -22.8 dB at the C-band frequency of 5.712 GHz while under vacuum. In a high power test, the load was able to terminate a peak power of 8.1 MW. Discussion includes future applications of the present research and how it will help to improve the implementation of future accelerator concepts.
△ Less
Submitted 1 August, 2023;
originally announced August 2023.
-
Sustainability Strategy for the Cool Copper Collider
Authors:
Martin Breidenbach,
Brendon Bullard,
Emilio Alessandro Nanni,
Dimitrios Ntounis,
Caterina Vernieri
Abstract:
The particle physics community has agreed that an electron-positron collider is the next step for continued progress in this field, giving a unique opportunity for a detailed study of the Higgs boson. Several proposals are currently under evaluation of the international community. Any large particle accelerator will be an energy consumer and so, today, we must be concerned about its impact on the…
▽ More
The particle physics community has agreed that an electron-positron collider is the next step for continued progress in this field, giving a unique opportunity for a detailed study of the Higgs boson. Several proposals are currently under evaluation of the international community. Any large particle accelerator will be an energy consumer and so, today, we must be concerned about its impact on the environment. This paper evaluates the carbon impact of the construction and operations of one of these Higgs factory proposals, the Cool Copper Collider. It introduces several strategies to lower the carbon impact of the accelerator. It proposes a metric to compare the carbon costs of Higgs factories, balancing physics reach, energy needs, and carbon footprint for both construction and operations, and compares the various Higgs factory proposals within this framework. For the Cool Copper Collider, the compact 8 km footprint and the possibility for cut-and-cover construction greatly reduce the dominant contribution from embodied carbon.
△ Less
Submitted 5 November, 2023; v1 submitted 8 July, 2023;
originally announced July 2023.
-
High Gradient Testing of off-Axis Coupled C-band Cu and CuAg Accelerating Structures
Authors:
Mitchell Schneider,
Muhammed Zuboraj,
Valery Dolgashev,
John J Lewellen,
Sami G Tantawi,
Ryan Fleming,
Dmitry Gorelov,
Mark Middendorf,
Emilio A Nanni,
Evgenya I Simakov
Abstract:
We report the results of high gradient testing of two single cell off axis coupled standing wave accelerating structures. Two brazed standing wave side coupled structures with the same geometry were tested one made of pure copper Cu and one made of a copper silver CuAg alloy with silver concentration of 0.08 percent. A peak surface electric field of 450 MV per m was achieved in the CuAg structure…
▽ More
We report the results of high gradient testing of two single cell off axis coupled standing wave accelerating structures. Two brazed standing wave side coupled structures with the same geometry were tested one made of pure copper Cu and one made of a copper silver CuAg alloy with silver concentration of 0.08 percent. A peak surface electric field of 450 MV per m was achieved in the CuAg structure for a klystron input power of 14.5 MW and a 1 mirco s pulse length which was 25 percent higher than the peak surface electric field achieved in the Cu structure. The superb high gradient performance was achieved because of the two major optimizations in the cavity geometry 1 the shunt impedance of the cavity was maximized for a peak surface electric field to accelerating gradient ratio of 2 for a fully relativistic particle 2 the peak magnetic field enhancement due to the input coupler was minimized to limit pulse heating. These tests allow us to conclude that C band accelerating structures can operate at peak fields similar to those at higher frequencies while providing a larger beam iris for improved beam transport.
△ Less
Submitted 30 October, 2022;
originally announced October 2022.
-
RF Accelerator Technology R&D: Report of AF7-rf Topical Group to Snowmass 2021
Authors:
Sergey Belomestnykh,
Emilio A. Nanni,
Hans Weise,
Sergey V. Baryshev,
Pashupati Dhakal,
Rongli Geng,
Bianca Giaccone,
Chunguang Jing,
Matthias Liepe,
Xueying Lu,
Tianhuan Luo,
Ganapati Myneni,
Alireza Nassiri,
David Neuffer,
Cho-Kuen Ng,
Sam Posen,
Sami Tantawi,
Anne-Marie Valente-Feliciano,
Jean-Luc Vay,
Brandon Weatherford,
Akira Yamamoto
Abstract:
Accelerator radio frequency (RF) technology has been and remains critical for modern high energy physics (HEP) experiments based on particle accelerators. Tremendous progress in advancing this technology has been achieved over the past decade in several areas highlighted in this report. These achievements and new results expected from continued R&D efforts could pave the way for upgrades of existi…
▽ More
Accelerator radio frequency (RF) technology has been and remains critical for modern high energy physics (HEP) experiments based on particle accelerators. Tremendous progress in advancing this technology has been achieved over the past decade in several areas highlighted in this report. These achievements and new results expected from continued R&D efforts could pave the way for upgrades of existing facilities, improvements to accelerators already under construction (e.g., PIP-II), well-developed proposals (e.g., ILC, CLIC), and/or enable concepts under development, such as FCC-ee, CEPC, C3, HELEN, multi-MW Fermilab Proton Intensity Upgrade, future Muon Colloder, etc. Advances in RF technology have impact beyond HEP on accelerators built for nuclear physics, basic energy sciences, and other areas. Recent examples of such accelerators are European XFEL, LCLS-II and LCLS-II-HE, SHINE, SNS, ESS, FRIB, and EIC. To support and enable new accelerator-based applications and even make some of them feasible, we must continue addressing their challenges via a comprehensive RF R&D program that would advance the existing RF technologies and explore the nascent ones.
△ Less
Submitted 25 August, 2022;
originally announced August 2022.
-
U.S. National Accelerator R\&D Program on Future Colliders
Authors:
P. C. Bhat,
S. Belomestnykh,
A. Bross,
S. Dasu,
D. Denisov,
S. Gourlay,
S. Jindariani,
A. J. Lankford,
S. Nagaitsev,
E. A. Nanni,
M. A. Palmer,
T. Raubenheimer,
V. Shiltsev,
A. Valishev,
C. Vernieri,
F. Zimmermann
Abstract:
Future colliders are an essential component of a strategic vision for particle physics. Conceptual studies and technical developments for several exciting future collider options are underway internationally. In order to realize a future collider, a concerted accelerator R\&D program is required. The U.S. HEP accelerator R\&D program currently has no direct effort in collider-specific R\&D area. T…
▽ More
Future colliders are an essential component of a strategic vision for particle physics. Conceptual studies and technical developments for several exciting future collider options are underway internationally. In order to realize a future collider, a concerted accelerator R\&D program is required. The U.S. HEP accelerator R\&D program currently has no direct effort in collider-specific R\&D area. This shortcoming greatly compromises the U.S. leadership role in accelerator and particle physics. In this white paper, we propose a new national accelerator R\&D program on future colliders and outline the important characteristics of such a program.
△ Less
Submitted 13 July, 2022;
originally announced July 2022.
-
Advanced RF Sources R&D for Economical Future Colliders
Authors:
Brandon Weatherford,
Emilio A. Nanni,
Sami Tantawi
Abstract:
The high power RF system will be a significant budgetary driver for any future collider. An order-of-magnitude improvement in cost/capability is needed, and as a result, a robust R&D program in next-generation, economical RF sources is essential. In this paper, we discuss the challenges and opportunities that arise from advancing the state of the art in these devices. Specifically, research initia…
▽ More
The high power RF system will be a significant budgetary driver for any future collider. An order-of-magnitude improvement in cost/capability is needed, and as a result, a robust R&D program in next-generation, economical RF sources is essential. In this paper, we discuss the challenges and opportunities that arise from advancing the state of the art in these devices. Specifically, research initiatives in new circuit topologies, advanced manufacturing techniques, and novel alternatives to conventional RF source components are discussed.
△ Less
Submitted 29 March, 2022;
originally announced March 2022.
-
Design, fabrication, and tuning of a THz-driven electron gun
Authors:
Samantha M. Lewis,
Julian Merrick,
Mohamed A. K. Othman,
Andrew Haase,
Sami Tantawi,
Emilio A. Nanni
Abstract:
We present the design, fabrication, and low power testing of a THz-driven field emission electron gun. The two cell standing-wave gun is designed to be powered by a 110 GHz gyrotron and produce 360 keV electrons with 500 kW of input power. Several gun structures were fabricated using a high precision diamond turned mandrel and copper electroforming. The field emission source is a copper tip with a…
▽ More
We present the design, fabrication, and low power testing of a THz-driven field emission electron gun. The two cell standing-wave gun is designed to be powered by a 110 GHz gyrotron and produce 360 keV electrons with 500 kW of input power. Several gun structures were fabricated using a high precision diamond turned mandrel and copper electroforming. The field emission source is a copper tip with a 50 $μ$m radius inserted halfway into first cell. The frequencies of the cavity resonances were mechanically tuned using azimuthal compression. This work presents electromagnetic and particle simulations of the design and cold test measurements of the fabricated structures.
△ Less
Submitted 30 March, 2022; v1 submitted 29 March, 2022;
originally announced March 2022.
-
C$^3$ Demonstration Research and Development Plan
Authors:
Emilio A. Nanni,
Martin Breidenbach,
Caterina Vernieri,
Sergey Belomestnykh,
Pushpalatha Bhat,
Sergei Nagaitsev,
Mei Bai,
William Berg,
Tim Barklow,
John Byrd,
Ankur Dhar,
Ram C. Dhuley,
Chris Doss,
Joseph Duris,
Auralee Edelen,
Claudio Emma,
Josef Frisch,
Annika Gabriel,
Spencer Gessner,
Carsten Hast,
Chunguang Jing,
Arkadiy Klebaner,
Anatoly K. Krasnykh,
John Lewellen,
Matthias Liepe
, et al. (25 additional authors not shown)
Abstract:
C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced stat…
▽ More
C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C$^3$ is the main linac. This white paper presents the staged approach towards a facility to demonstrate C$^3$ technology with both Direct (source and main linac) and Parallel (beam delivery, damping ring, ancillary component) R&D. The white paper also includes discussion on the approach for technology industrialization, related HEP R&D activities that are enabled by C$^3$ R&D, infrastructure requirements and siting options.
△ Less
Submitted 6 July, 2022; v1 submitted 17 March, 2022;
originally announced March 2022.
-
Continuous and Coordinated Efforts of Structure Wakefield Acceleration (SWFA) Development for an Energy Frontier Machine
Authors:
Chunguang Jing,
John Power,
Jiahang Shao,
Gwanghui Ha,
Philippe Piot,
Xueying Lu,
Alexander Zholents,
Alexei Kanareykin,
Sergey Kuzikov,
James B. Rosenzweig,
Gerard Andonian,
Evgenya Ivanovna Simakov,
Janardan Upadhyay,
Chuanxiang Tang,
Richard J Temkin,
Emilio Alessandro Nanni,
John Lewellen
Abstract:
Structure wakefield acceleration (SWFA) is well suited for the linear collider (LC) application due to its natural ability to accelerate positrons and preserve emittance. Under the SWFA roadmap, which was developed in response to Snowmass 2013 recommendations, four principal technologies: drive beam, main beam, wakefield structure, and LC facility design, have been investigated. The two SWFA schem…
▽ More
Structure wakefield acceleration (SWFA) is well suited for the linear collider (LC) application due to its natural ability to accelerate positrons and preserve emittance. Under the SWFA roadmap, which was developed in response to Snowmass 2013 recommendations, four principal technologies: drive beam, main beam, wakefield structure, and LC facility design, have been investigated. The two SWFA schemes under development are the collinear wakefield accelerator (CWA), in which the drive and main beam follow the same path through a structure, and the two-beam accelerator (TBA), where the drive and main beam pass through different structures. To further advance the SWFA technology in the next decade, continuous and coordinated efforts must be carried out in a more synchronized way. This whitepaper is written to address the research needs in SWFA for preparation of Snowmass 2022.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Strategy for Understanding the Higgs Physics: The Cool Copper Collider
Authors:
Sridhara Dasu,
Emilio A. Nanni,
Michael E. Peskin,
Caterina Vernieri,
Tim Barklow,
Rainer Bartoldus,
Pushpalatha C. Bhat,
Kevin Black,
Jim Brau,
Martin Breidenbach,
Nathaniel Craig,
Dmitri Denisov,
Lindsey Gray,
Philip C. Harris,
Michael Kagan,
Zhen Liu,
Patrick Meade,
Nathan Majernik,
Sergei Nagaitsev,
Isobel Ojalvo,
Christoph Paus,
Carl Schroeder,
Ariel G. Schwartzman,
Jan Strube,
Su Dong
, et al. (4 additional authors not shown)
Abstract:
A program to build a lepton-collider Higgs factory, to precisely measure the couplings of the Higgs boson to other particles, followed by a higher energy run to establish the Higgs self-coupling and expand the new physics reach, is widely recognized as a primary focus of modern particle physics. We propose a strategy that focuses on a new technology and preliminary estimates suggest that can lead…
▽ More
A program to build a lepton-collider Higgs factory, to precisely measure the couplings of the Higgs boson to other particles, followed by a higher energy run to establish the Higgs self-coupling and expand the new physics reach, is widely recognized as a primary focus of modern particle physics. We propose a strategy that focuses on a new technology and preliminary estimates suggest that can lead to a compact, affordable machine. New technology investigations will provide much needed enthusiasm for our field, resulting in trained workforce. This cost-effective, compact design, with technologies useful for a broad range of other accelerator applications, could be realized as a project in the US. Its technology innovations, both in the accelerator and the detector, will offer unique and exciting opportunities to young scientists. Moreover, cost effective compact designs, broadly applicable to other fields of research, are more likely to obtain financial support from our funding agencies.
△ Less
Submitted 7 June, 2022; v1 submitted 15 March, 2022;
originally announced March 2022.
-
C$^3$: A "Cool" Route to the Higgs Boson and Beyond
Authors:
Mei Bai,
Tim Barklow,
Rainer Bartoldus,
Martin Breidenbach,
Philippe Grenier,
Zhirong Huang,
Michael Kagan,
John Lewellen,
Zenghai Li,
Thomas W. Markiewicz,
Emilio A. Nanni,
Mamdouh Nasr,
Cho-Kuen Ng,
Marco Oriunno,
Michael E. Peskin,
Thomas G. Rizzo,
James Rosenzweig,
Ariel G. Schwartzman,
Vladimir Shiltsev,
Evgenya Simakov,
Bruno Spataro,
Dong Su,
Sami Tantawi,
Caterina Vernieri,
Glen White
, et al. (1 additional authors not shown)
Abstract:
We present a proposal for a cold copper distributed coupling accelerator that can provide a rapid route to precision Higgs physics with a compact 8 km footprint. This proposal is based on recent advances that increase the efficiency and operating gradient of a normal conducting accelerator. This technology also provides an $e^{+}e^{-}$ collider path to physics at multi-TeV energies. In this articl…
▽ More
We present a proposal for a cold copper distributed coupling accelerator that can provide a rapid route to precision Higgs physics with a compact 8 km footprint. This proposal is based on recent advances that increase the efficiency and operating gradient of a normal conducting accelerator. This technology also provides an $e^{+}e^{-}$ collider path to physics at multi-TeV energies. In this article, we describe our vision for this technology and the near-term R&D program needed to pursue it.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Visualizing femtosecond dynamics with ultrafast electron probes through terahertz compression and time-stamping
Authors:
Mohamed A. K. Othman,
Emma C. Snively,
Annika E. Gabriel,
Michael E. Kozina,
Xiaozhe Shen,
Fuaho Ji,
Samantha Lewis,
Stephen Weathersby,
Duan Luo,
Xijie Wang,
Matthias C. Hoffmann,
Emilio A. Nanni
Abstract:
Visualizing ultrafast dynamics at the atomic scale requires time-resolved pump-probe characterization with femtosecond temporal resolution. For single-shot ultrafast electron diffraction (UED) with fully relativistic electron bunch probes, existing techniques are limited by the achievable electron probe bunch length, charge, and timing jitter. We present the first experimental demonstration of pum…
▽ More
Visualizing ultrafast dynamics at the atomic scale requires time-resolved pump-probe characterization with femtosecond temporal resolution. For single-shot ultrafast electron diffraction (UED) with fully relativistic electron bunch probes, existing techniques are limited by the achievable electron probe bunch length, charge, and timing jitter. We present the first experimental demonstration of pump-probe UED with THz-driven compression and time-stamping that enable UED probes with unprecedented temporal resolution. This technique utilizes two counter-propagating quasi-single-cycle THz pulses generated from two OH-1 organic crystals coupled into an optimized THz compressor structure. Ultrafast dynamics of photoexcited bismuth films show an improved temporal resolution from 178 fs down to 85 fs when the THz-compressed UED probes are used with no time-stamping correction. Furthermore, we use a novel time-stamping technique to reveal transient oscillations in the dynamical response of THz-excited single-crystal gold films previously inaccessible by standard UED, achieving a time-stamped temporal resolution down to 5 fs.
△ Less
Submitted 12 April, 2021;
originally announced April 2021.
-
Spectrally reconfigurable quantum emitters enabled by optimized fast modulation
Authors:
Daniil M. Lukin,
Alexander D. White,
Rahul Trivedi,
Melissa A. Guidry,
Naoya Morioka,
Charles Babin,
Öney O. Soykal,
Jawad Ul Hassan,
Nguyen Tien Son,
Takeshi Ohshima,
Praful K. Vasireddy,
Mamdouh H. Nasr,
Shuo Sun,
Jean-Phillipe W. MacLean,
Constantin Dory,
Emilio A. Nanni,
Jörg Wrachtrup,
Florian Kaiser,
Jelena Vučković
Abstract:
The ability to shape photon emission facilitates strong photon-mediated interactions between disparate physical systems, thereby enabling applications in quantum information processing, simulation and communication. Spectral control in solid state platforms such as color centers, rare earth ions, and quantum dots is particularly attractive for realizing such applications on-chip. Here we propose t…
▽ More
The ability to shape photon emission facilitates strong photon-mediated interactions between disparate physical systems, thereby enabling applications in quantum information processing, simulation and communication. Spectral control in solid state platforms such as color centers, rare earth ions, and quantum dots is particularly attractive for realizing such applications on-chip. Here we propose the use of frequency-modulated optical transitions for spectral engineering of single photon emission. Using a scattering-matrix formalism, we find that a two-level system, when modulated faster than its optical lifetime, can be treated as a single-photon source with a widely reconfigurable photon spectrum that is amenable to standard numerical optimization techniques. To enable the experimental demonstration of this spectral control scheme, we investigate the Stark tuning properties of the silicon vacancy in silicon carbide, a color center with promise for optical quantum information processing technologies. We find that the silicon vacancy possesses excellent spectral stability and tuning characteristics, allowing us to probe its fast modulation regime, observe the theoretically-predicted two-photon correlations, and demonstrate spectral engineering. Our results suggest that frequency modulation is a powerful technique for the generation of new light states with unprecedented control over the spectral and temporal properties of single photons.
△ Less
Submitted 27 July, 2020; v1 submitted 27 March, 2020;
originally announced March 2020.
-
Femtosecond compression dynamics and timing jitter suppression in a terahertz-driven electron bunch compressor
Authors:
E. C. Snively,
M. A. K. Othman,
M. Kozina,
B. K. Ofori-Okai,
S. P. Weathersby,
S. Park,
X. Shen,
X. J. Wang,
M. C. Hoffmann,
R. K. Li,
E. A. Nanni
Abstract:
We present the first demonstration of THz-driven bunch compression and timing stabilization of a few-fC relativistic electron beam with kinetic energy of 2.5 MeV using quasi-single-cycle strong field THz radiation in a shorted parallel-plate structure. Compression by nearly a factor of 3 produced a 39 fs rms bunch length and a reduction in timing jitter by more than a factor of 2, to 31 fs rms, of…
▽ More
We present the first demonstration of THz-driven bunch compression and timing stabilization of a few-fC relativistic electron beam with kinetic energy of 2.5 MeV using quasi-single-cycle strong field THz radiation in a shorted parallel-plate structure. Compression by nearly a factor of 3 produced a 39 fs rms bunch length and a reduction in timing jitter by more than a factor of 2, to 31 fs rms, offering a significant improvement to beam performance for applications like ultrafast electron diffraction. This THz-driven technique provides a critical step towards unprecedented timing resolution in ultrafast sciences and other accelerator applications using femtosecond-scale electron beams.
△ Less
Submitted 7 June, 2019;
originally announced June 2019.
-
Nanopatterned electron beams for temporal coherence and deterministic phase control of x-ray free-electron lasers
Authors:
W. S. Graves,
S. L. Y. Chang,
D. Dwyer,
P. Fromme,
M. Holl,
B. D. A. Levin,
L. E. Malin,
J. L. Vincent,
J. C. H. Spence,
E. A. Nanni,
R. K. Li,
X. Shen,
S. Weathersby,
A. Sandhu
Abstract:
We demonstrate the ability to create electron beams with high-contrast, nanometer-scale density modulations as a first step toward developing full control of the phase fronts of an x-ray free-electron laser. The nanopatterned electron beams are produced by diffracting electrons through thin single-crystal silicon membranes that are lithographically patterned to different thicknesses. For transform…
▽ More
We demonstrate the ability to create electron beams with high-contrast, nanometer-scale density modulations as a first step toward developing full control of the phase fronts of an x-ray free-electron laser. The nanopatterned electron beams are produced by diffracting electrons through thin single-crystal silicon membranes that are lithographically patterned to different thicknesses. For transform-limited x-ray production the desired pattern is a series of regularly spaced lines (i.e. a grating) that generate uniformly spaced nanobunches of electrons, however nearly any pattern can be etched in the silicon, such as frequency-chirps or multiple patterns of different colors or line spacings. When these patterns are transferred from the spatial to the temporal dimension by accelerator electromagnetic optics they will control the phase fronts of coherent x-rays, giving unprecedented deterministic control over the phase of ultrashort x-ray pulses. In short, this method allows the time-structure for a fully coherent x-ray beam to be generated from a pattern written on a semiconductor wafer by lithography.
△ Less
Submitted 4 June, 2019;
originally announced June 2019.
-
Theoretical and experimental electron diffraction intensity maps for single crystal silicon from an ultrafast source
Authors:
L. E. Malin,
W. S. Graves,
M. Holl,
J. C. H. Spence,
E. A. Nanni,
R. K. Li,
X. Shen,
S. Weathersby
Abstract:
Electron diffraction through a thin patterned silicon membrane can be used to create complex spatial modulations in electron distributions by varying the intensity of different reflections using parameters such as crystallographic orientation and wafer thickness, then selecting specific spots in the diffraction plane using apertures. The patterned electron beams can be used to control phase and am…
▽ More
Electron diffraction through a thin patterned silicon membrane can be used to create complex spatial modulations in electron distributions by varying the intensity of different reflections using parameters such as crystallographic orientation and wafer thickness, then selecting specific spots in the diffraction plane using apertures. The patterned electron beams can be used to control phase and amplitude of subsequent x-ray emission, enabling novel coherent x-ray methods. The electrons themselves can also be used for femtosecond time resolved diffraction and microscopy. As a first step toward patterned beams, we demonstrate experimentally and through simulation the ability to accurately predict and control diffraction spot intensities. We simulate MeV transmission electron diffraction patterns using the multislice method for various crystallographic orientations of a single crystal Si(100) membrane near beam normal. The resulting intensity maps of the Bragg reflections are compared to experimental results obtained at the Accelerator Structure Test Area Ultrafast Electron Diffraction (ASTA UED) facility at SLAC. Furthermore, the fraction of inelastic and elastic scattering of the initial charge is estimated along with the absorption of the membrane to determine the contrast that would be seen in a patterned version of the Si(100) membrane.
△ Less
Submitted 28 May, 2019; v1 submitted 17 May, 2019;
originally announced May 2019.
-
Parallel-Plate Waveguides for Terahertz-Driven MeV Electron Bunch Compression
Authors:
Mohamed A. K. Othman,
Matthias C. Hoffmann,
Michael K. Kozina,
X. J. Wang,
Renkai K. Li,
Emilio A. Nanni
Abstract:
We demonstrate the electromagnetic performance of waveguides for femtosecond electron beam bunch manipulation and compression with strong-field terahertz (THz) pulses. The compressor structure is a dispersion-free exponentially-tapered parallel-plate waveguide (PPWG) that can focus single-cycle THz pulses along one dimension. We show test results of the tapered PPWG structure using electro-optic s…
▽ More
We demonstrate the electromagnetic performance of waveguides for femtosecond electron beam bunch manipulation and compression with strong-field terahertz (THz) pulses. The compressor structure is a dispersion-free exponentially-tapered parallel-plate waveguide (PPWG) that can focus single-cycle THz pulses along one dimension. We show test results of the tapered PPWG structure using electro-optic sampling (EOS) at the interaction region with peak fields of at least 300 kV/cm given 0.9 uJ of incoming THz energy. We also present a modified shorted design of the tapered PPWG for better beam manipulation and reduced magnetic field as an alternative to a dual-feed approach. As an example, we demonstrate that with 5 uJ of THz energy, the PPWG compresses a 2.5 MeV electron bunch by a compression factor of more than 4 achieving a bunch length of about 18 fs.
△ Less
Submitted 7 May, 2019;
originally announced May 2019.
-
An Advanced NCRF Linac Concept for a High Energy e$^+$e$^-$ Linear Collider
Authors:
Karl L. Bane,
Timothy L. Barklow,
Martin Breidenbach,
Craig P. Burkhart,
Eric A. Fauve,
Alysson R. Gold,
Vincent Heloin,
Zenghai Li,
Emilio A. Nanni,
Mamdouh Nasr,
Marco Oriunno,
James McEwan Paterson,
Michael E. Peskin,
Tor O. Raubenheimer,
Sami G. Tantawi
Abstract:
We have explored a concept for an advanced Normal-Conducting Radio-Frequency (NCRF) C-band linear accelerator (linac) structure to achieve a high gradient, high power e$^+$e$^-$ linear collider in the TeV class. This design study represents the first comprehensive investigation for an emerging class of distributed coupling accelerator topology exploring nominal cavity geometries, frequency and tem…
▽ More
We have explored a concept for an advanced Normal-Conducting Radio-Frequency (NCRF) C-band linear accelerator (linac) structure to achieve a high gradient, high power e$^+$e$^-$ linear collider in the TeV class. This design study represents the first comprehensive investigation for an emerging class of distributed coupling accelerator topology exploring nominal cavity geometries, frequency and temperature of operation. The structure features internal manifolds for distributing RF power separately to each cell, permitting the full structure geometry to be designed for high shunt impedance and low breakdown. Optimized within operational constraints, we find that it is advantageous for the structure to be cooled directly by liquid nitrogen (LN), further increasing the shunt impedance. A crucial part of this design process has been cost optimization, which is largely driven by the cost of peak RF power. The first operation of a distributed coupling structure at cryogenic temperatures and the nominal operating gradient 120 MeV/m is also presented, demonstrating the feasibility of achieving high-gradient performance with a cryogenically-cooled normal-conducting accelerating structure.
△ Less
Submitted 7 April, 2019; v1 submitted 26 July, 2018;
originally announced July 2018.
-
Terahertz-based attosecond metrology of relativistic electron beams
Authors:
R. K. Li,
M. C. Hoffmann,
E. A. Nanni,
S. H. Glenzer,
A. M. Lindenberg,
B. K. Ofori-Okai,
A. H. Reid,
X. Shen,
S. P. Weathersby,
J. Yang,
M. Zajac,
X. J. Wang
Abstract:
Photons, electrons, and their interplay are at the heart of photonic devices and modern instruments for ultrafast science [1-10]. Nowadays, electron beams of the highest intensity and brightness are created by photoemission with short laser pulses, and then accelerated and manipulated using GHz radiofrequency electromagnetic fields. The electron beams are utilized to directly map photoinduced dyna…
▽ More
Photons, electrons, and their interplay are at the heart of photonic devices and modern instruments for ultrafast science [1-10]. Nowadays, electron beams of the highest intensity and brightness are created by photoemission with short laser pulses, and then accelerated and manipulated using GHz radiofrequency electromagnetic fields. The electron beams are utilized to directly map photoinduced dynamics with ultrafast electron scattering techniques, or further engaged for coherent radiation production at up to hard X-ray wavelengths [11-13]. The push towards improved timing precision between the electron beams and pump optical pulses though, has been stalled at the few tens of femtosecond level, due to technical challenges with synchronizing the high power rf fields with optical sources. Here, we demonstrate attosecond electron metrology using laser-generated single-cycle THz radiation, which is intrinsically phase locked to the optical drive pulses, to manipulate multi-MeV relativistic electron beams. Control and single-shot characterization of bright electron beams at this unprecedented level open up many new opportunities for atomic visualization.
△ Less
Submitted 4 May, 2018;
originally announced May 2018.
-
Photonic-Band-Gap Gyrotron Amplifier with Picosecond Pulses
Authors:
Emilio A. Nanni,
Sudheer Jawla,
Samantha M. Lewis,
Michael A. Shapiro,
Richard J. Temkin
Abstract:
We report the amplification of 250~GHz pulses as short as 260~ps without observation of pulse broadening using a photonic-band-gap circuit gyrotron traveling-wave-amplifier. The gyrotron amplifier operates with 38~dB of device gain and 8~GHz of instantaneous bandwidth. The operational bandwidth of the amplifier can be tuned over 16 GHz by adjusting the operating voltage of the electron beam and th…
▽ More
We report the amplification of 250~GHz pulses as short as 260~ps without observation of pulse broadening using a photonic-band-gap circuit gyrotron traveling-wave-amplifier. The gyrotron amplifier operates with 38~dB of device gain and 8~GHz of instantaneous bandwidth. The operational bandwidth of the amplifier can be tuned over 16 GHz by adjusting the operating voltage of the electron beam and the magnetic field. The amplifier uses a 30~cm long photonic-band-gap interaction circuit to confine the desired TE$_{03}$-like operating mode while suppressing lower order modes which can result in undesired oscillations. The circuit gain is $>$55~dB for a beam voltage of 23~kV and a current of 700~mA. These results demonstrate the wide bandwidths and high gain achievable with gyrotron amplifiers. The amplification of picosecond pulses of variable lengths, 260-800~ps, shows good agreement with theory using the coupled dispersion relation and the gain-spectrum of the amplifier as measured with quasi-CW input pulses.
△ Less
Submitted 22 September, 2017;
originally announced September 2017.
-
Terahertz-driven, all-optical electron gun
Authors:
W. Ronny Huang,
Arya Fallahi,
Xiaojun Wu,
Huseyin Cankaya,
Anne-Laure Calendron,
Koustuban Ravi,
Dongfang Zhang,
Emilio A. Nanni,
Kyung-Han Hong,
Franz X. Kärtner
Abstract:
Ultrashort electron beams with narrow energy spread, high charge, and low jitter are essential for resolving phase transitions in metals, semiconductors, and molecular crystals. These semirelativistic beams, produced by phototriggered electron guns, are also injected into accelerators for x-ray light sources. The achievable resolution of these time-resolved electron diffraction or x-ray experiment…
▽ More
Ultrashort electron beams with narrow energy spread, high charge, and low jitter are essential for resolving phase transitions in metals, semiconductors, and molecular crystals. These semirelativistic beams, produced by phototriggered electron guns, are also injected into accelerators for x-ray light sources. The achievable resolution of these time-resolved electron diffraction or x-ray experiments has been hindered by surface field and timing jitter limitations in conventional RF guns, which thus far are <200 MV/m and >96 fs, respectively. A gun driven by optically-generated single-cycle THz pulses provides a practical solution to enable not only GV/m surface fields but also absolute timing stability, since the pulses are generated by the same laser as the phototrigger. Here, we demonstrate an all-optical THz gun yielding peak electron energies approaching 1 keV, accelerated by 300 MV/m THz fields in a novel micron-scale waveguide structure. We also achieve quasimonoenergetic, sub-keV bunches with 32 fC of charge, which can already be used for time-resolved low-energy electron diffraction. Such ultracompact, easy to implement guns driven by intrinsically synchronized THz pulses that are pumped by an amplified arm of the already present photoinjector laser provide a new tool with potential to transform accelerator based science.
△ Less
Submitted 21 May, 2016;
originally announced May 2016.
-
Nano-modulated electron beams via electron diffraction and emittance exchange for coherent x-ray generation
Authors:
Emilio A. Nanni,
William S. Graves,
David E. Moncton
Abstract:
We present a new method for generation of relativistic electron beams with current modulation on the nanometer scale and below. The current modulation is produced by diffracting relativistic electrons in single crystal Si, accelerating the diffracted beam and imaging the crystal structure, then transferring the image into the temporal dimension via emittance exchange. The modulation period can be…
▽ More
We present a new method for generation of relativistic electron beams with current modulation on the nanometer scale and below. The current modulation is produced by diffracting relativistic electrons in single crystal Si, accelerating the diffracted beam and imaging the crystal structure, then transferring the image into the temporal dimension via emittance exchange. The modulation period can be tuned by adjusting electron optics after diffraction. This tunable longitudinal modulation can have a period as short as a few angstroms, enabling production of coherent hard x-rays from a source based on inverse Compton scattering with total accelerator length of approximately ten meters. Electron beam simulations from cathode emission through diffraction, acceleration and image formation with variable magnification are presented along with estimates of the coherent x-ray output properties.
△ Less
Submitted 21 September, 2017; v1 submitted 23 June, 2015;
originally announced June 2015.
-
Aberration Corrected Emittance Exchange
Authors:
Emilio A. Nanni,
William S. Graves
Abstract:
Full exploitation of emittance exchange (EEX) requires aberration-free performance of a complex imaging system including active radio-frequency (RF) elements which can add temporal distortions. We investigate the performance of an EEX line where the exchange occurs between two dimensions with normalized emittances which differ by multiple orders of magnitude. The transverse emittance is exchanged…
▽ More
Full exploitation of emittance exchange (EEX) requires aberration-free performance of a complex imaging system including active radio-frequency (RF) elements which can add temporal distortions. We investigate the performance of an EEX line where the exchange occurs between two dimensions with normalized emittances which differ by multiple orders of magnitude. The transverse emittance is exchanged into the longitudinal dimension using a double dog-leg emittance exchange setup with a five cell RF deflector cavity. Aberration correction is performed on the four most dominant aberrations. These include temporal aberrations that are corrected with higher order magnetic optical elements located where longitudinal and transverse emittance are coupled. We demonstrate aberration-free performance of an EEX line with emittances differing by four orders of magnitude, \textit{i.e.} an initial transverse emittance of 1~pm-rad is exchanged with a longitudinal emittance of 10~nm-rad.
△ Less
Submitted 22 April, 2015; v1 submitted 11 March, 2015;
originally announced March 2015.
-
Direct laser acceleration of electrons in free-space
Authors:
Sergio Carbajo,
Emilio A. Nanni,
Liang Jie Wong,
R. J. Dwayne Miller,
Franz X. Kärtner
Abstract:
Compact laser-driven accelerators are versatile and powerful tools of unarguable relevance on societal grounds for the diverse purposes of science, health, security, and technology because they bring enormous practicality to state-of-the-art achievements of conventional radio-frequency accelerators. Current benchmarking laser-based technologies rely on a medium to assist the light-matter interacti…
▽ More
Compact laser-driven accelerators are versatile and powerful tools of unarguable relevance on societal grounds for the diverse purposes of science, health, security, and technology because they bring enormous practicality to state-of-the-art achievements of conventional radio-frequency accelerators. Current benchmarking laser-based technologies rely on a medium to assist the light-matter interaction, which impose material limitations or strongly inhomogeneous fields. The advent of few cycle ultra-intense radially polarized lasers has materialized an extensively studied novel accelerator that adopts the simplest form of laser acceleration and is unique in requiring no medium to achieve strong longitudinal energy transfer directly from laser to particle. Here we present the first observation of direct longitudinal laser acceleration of non-relativistic electrons that undergo highly-directional multi-GeV/m accelerating gradients. This demonstration opens a new frontier for direct laser-driven particle acceleration capable of creating well collimated and relativistic attosecond electron bunches and x-ray pulses.
△ Less
Submitted 21 January, 2015;
originally announced January 2015.
-
Terahertz-driven linear electron acceleration
Authors:
Emilio Alessandro Nanni,
Wenqian Ronny Huang,
Kyung-Han Hong,
Koustuban Ravi,
Arya Fallahi,
Gustavo Moriena,
R. J. Dwayne Miller,
Franz X. Kärtner
Abstract:
The cost, size and availability of electron accelerators is dominated by the achievable accelerating gradient. Conventional high-brightness radio-frequency (RF) accelerating structures operate with 30-50 MeV/m gradients. Electron accelerators driven with optical or infrared sources have demonstrated accelerating gradients orders of magnitude above that achievable with conventional RF structures. H…
▽ More
The cost, size and availability of electron accelerators is dominated by the achievable accelerating gradient. Conventional high-brightness radio-frequency (RF) accelerating structures operate with 30-50 MeV/m gradients. Electron accelerators driven with optical or infrared sources have demonstrated accelerating gradients orders of magnitude above that achievable with conventional RF structures. However, laser-driven wakefield accelerators require intense femtosecond sources and direct laser-driven accelerators and suffer from low bunch charge, sub-micron tolerances and sub-femtosecond timing requirements due to the short wavelength of operation. Here, we demonstrate the first linear acceleration of electrons with keV energy gain using optically-generated terahertz (THz) pulses. THz-driven accelerating structures enable high-gradient electron or proton accelerators with simple accelerating structures, high repetition rates and significant charge per bunch. Increasing the operational frequency of accelerators into the THz band allows for greatly increased accelerating gradients due to reduced complications with respect to breakdown and pulsed heating. Electric fields in the GV/m range have been achieved in the THz frequency band using all optical methods. With recent advances in the generation of THz pulses via optical rectification of slightly sub-picosecond pulses, in particular improvements in conversion efficiency and multi-cycle pulses, increasing accelerating gradients by two orders of magnitude over conventional linear accelerators (LINACs) has become a possibility. These ultra-compact THz accelerators with extremely short electron bunches hold great potential to have a transformative impact for free electron lasers, future linear particle colliders, ultra-fast electron diffraction, x-ray science, and medical therapy with x-rays and electron beams.
△ Less
Submitted 9 March, 2015; v1 submitted 17 November, 2014;
originally announced November 2014.
-
Toward a terahertz-driven electron gun
Authors:
W. Ronny Huang,
Emilio A. Nanni,
Koustuban Ravi,
Kyung-Han Hong,
Liang Jie Wong,
Phillip D. Keathley,
A. Fallahi,
Luis Zapata,
Franz X. Kärtner
Abstract:
Femtosecond electron bunches with keV energies and eV energy spread are needed by condensed matter physicists to resolve state transitions in carbon nanotubes, molecular structures, organic salts, and charge density wave materials. These semirelativistic electron sources are not only of interest for ultrafast electron diffraction, but also for electron energy-loss spectroscopy and as a seed for x-…
▽ More
Femtosecond electron bunches with keV energies and eV energy spread are needed by condensed matter physicists to resolve state transitions in carbon nanotubes, molecular structures, organic salts, and charge density wave materials. These semirelativistic electron sources are not only of interest for ultrafast electron diffraction, but also for electron energy-loss spectroscopy and as a seed for x-ray FELs. Thus far, the output energy spread (hence pulse duration) of ultrafast electron guns has been limited by the achievable electric field at the surface of the emitter, which is 10 MV/m for DC guns and 200 MV/m for RF guns. A single-cycle THz electron gun provides a unique opportunity to not only achieve GV/m surface electric fields but also with relatively low THz pulse energies, since a single-cycle transform-limited waveform is the most efficient way to achieve intense electric fields. Here, electron bunches of 50 fC from a flat copper photocathode are accelerated from rest to tens of eV by a microjoule THz pulse with peak electric field of 72 MV/m at 1 kHz repetition rate. We show that scaling to the readily-available GV/m THz field regime would translate to monoenergetic electron beams of ~100 keV.
△ Less
Submitted 22 March, 2015; v1 submitted 30 September, 2014;
originally announced September 2014.
-
Compact x-ray source based on burst-mode inverse Compton scattering at 100 kHz
Authors:
W. S. Graves,
J. Bessuille,
P. Brown,
S. Carbajo,
V. Dolgashev,
K. -H. Hong,
E. Ihloff,
B. Khaykovich,
H. Lin,
K. Murari,
E. A. Nanni,
G. Resta,
S. Tantawi,
L. E. Zapata,
F. X. Kärtner,
D. E. Moncton
Abstract:
A design for a compact x-ray light source (CXLS) with flux and brilliance orders of magnitude beyond existing laboratory scale sources is presented. The source is based on inverse Compton scattering of a high brightness electron bunch on a picosecond laser pulse. The accelerator is a novel high-efficiency standing-wave linac and RF photoinjector powered by a single ultrastable RF transmitter at x-…
▽ More
A design for a compact x-ray light source (CXLS) with flux and brilliance orders of magnitude beyond existing laboratory scale sources is presented. The source is based on inverse Compton scattering of a high brightness electron bunch on a picosecond laser pulse. The accelerator is a novel high-efficiency standing-wave linac and RF photoinjector powered by a single ultrastable RF transmitter at x-band RF frequency. The high efficiency permits operation at repetition rates up to 1 kHz, which is further boosted to 100 kHz by operating with trains of 100 bunches of 100 pC charge, each separated by 5 ns. The entire accelerator is approximately 1 meter long and produces hard x-rays tunable over a wide range of photon energies. The colliding laser is a Yb:YAG solid-state amplifier producing 1030 nm, 100 mJ pulses at the same 1 kHz repetition rate as the accelerator. The laser pulse is frequency-doubled and stored for many passes in a ringdown cavity to match the linac pulse structure. At a photon energy of 12.4 keV, the predicted x-ray flux is $5 \times 10^{11}$ photons/second in a 5% bandwidth and the brilliance is $2 \times 10^{12}\mathrm{photons/(sec\ mm^2\ mrad^2\ 0.1\%)}$ in pulses with RMS pulse length of 490 fs. The nominal electron beam parameters are 18 MeV kinetic energy, 10 microamp average current, 0.5 microsecond macropulse length, resulting in average electron beam power of 180 W. Optimization of the x-ray output is presented along with design of the accelerator, laser, and x-ray optic components that are specific to the particular characteristics of the Compton scattered x-ray pulses.
△ Less
Submitted 9 October, 2014; v1 submitted 24 September, 2014;
originally announced September 2014.
