-
Unraveling the multivalent Aluminium-ion redox mechanism in 3,4,9,10-Perylenetetracarboxylic dianhydride (PTCDA)
Authors:
Nicolò Canever,
Thomas Nann
Abstract:
Rechargeable Aluminium-organic batteries are an exciting emerging energy storage technology owing to their low cost and promising high performance, thanks to the ability to allow multiple-electron redox chemistry and multivalent Al-ion intercalation. In this work, we use a combination of Density Functional Theory (DFT) calculations and experimental methods to examine the mechanism behind the charg…
▽ More
Rechargeable Aluminium-organic batteries are an exciting emerging energy storage technology owing to their low cost and promising high performance, thanks to the ability to allow multiple-electron redox chemistry and multivalent Al-ion intercalation. In this work, we use a combination of Density Functional Theory (DFT) calculations and experimental methods to examine the mechanism behind the charge-discharge reaction of the organic dye 3,4,9,10-Perylenetetracarboxylic dianhydride (PTCDA) in the 1,3-ethylmethylimidazolium (EMIm$^+$) chloroaluminate electrolyte. We conclude that, contrary to previous reports claiming the intercalation of trivalent Al$^{3+}$, the actual ionic species involved in the redox reaction is the divalent AlCl$^{2+}$. While a less-than-ideal scenario, this mechanism still allows a theoretical transfer of four electrons per formula unit, corresponding to a remarkable specific capacity of 273 mAh g$^{-1}$. However, the poor reversibility of the reaction and low cycle life of the PTCDA-based cathode, due to its solubility in the electrolyte, make it an unlikely candidate for a commercial application.
△ Less
Submitted 12 December, 2021;
originally announced December 2021.
-
Re-discovering micro-emulsion electrolytes: a biphasic electrolyte platform for Organic redox flow batteries
Authors:
Rohan Borah,
Fraser R Hughson,
Thomas Nann
Abstract:
Redox flow batteries (RFBs) have gained popularity as large-scale energy storage systems for wind and solar powered grids. Modern RFB systems are based on highly corrosive and/or flammable electrolytes. Organic redox active species for RFBs are gaining commercial traction, but there is a trade-off in choosing aqueous or non-aqueous electrolytes in terms of rate capabilities, energy density, safety…
▽ More
Redox flow batteries (RFBs) have gained popularity as large-scale energy storage systems for wind and solar powered grids. Modern RFB systems are based on highly corrosive and/or flammable electrolytes. Organic redox active species for RFBs are gaining commercial traction, but there is a trade-off in choosing aqueous or non-aqueous electrolytes in terms of rate capabilities, energy density, safety and cost. While modification of organic redox molecules to mitigate these issues is prevalent in the literature, the search for novel electrolyte systems is scarce. Here we present microemulsion-based electrolytes as an alternative for the next generation of organic RFBs. Micro-emulsion electrolytes (MEs) offer the advantages of decoupled solubility and ionic conductivity, broad electrochemical windows, non-flammability, simple fabrication modes and low cost of constituent chemicals. The electrochemical properties of organic redox species in MEs have been investigated for RFB requirements and a proof-of-concept flow cell with a widely studied redox system and a commercial membrane is shown. The compositions of MEs can be tailored to the redox system, making them a platform of electrolytes for all organic redox systems under consideration and benefit.
△ Less
Submitted 20 June, 2021;
originally announced June 2021.
-
A Theoretical Framework for the Electrochemical Characterization of Anisotropic Micro-Emulsions
Authors:
Tim Tichter,
Rohan Borah,
Thomas Nann
Abstract:
Micro emulsions (MEs) offer an exceptionally broad spectrum of applications covering sensing, electrosynthesis, supercapacitors and redox-flow batteries. Herein, we develop the theory for a sophisticated electrochemical characterizion of MEs with a spatially and time-invariant anisotropy in the diffusion domain by means of cyclic voltammerty (CV). By introducing spatially dependent diffusion coeff…
▽ More
Micro emulsions (MEs) offer an exceptionally broad spectrum of applications covering sensing, electrosynthesis, supercapacitors and redox-flow batteries. Herein, we develop the theory for a sophisticated electrochemical characterizion of MEs with a spatially and time-invariant anisotropy in the diffusion domain by means of cyclic voltammerty (CV). By introducing spatially dependent diffusion coefficients into Ficks' first law, we derive a modified diffusion equation to simulate any inherent anisotropy of the ME under investigation. Moreover, by formulating an extended second-order homogeneous six-member square scheme for a kinetically controlled two-step two-electron reaction we capture the intricate entanglement of chemical and electrochemical equilibria. Our theoretical concept is finally validated by experimental CV data for the ME based two-step redox reaction of methyl-viologen which paves the way for a quantitative electrochemical characterization MEs.
△ Less
Submitted 26 April, 2021;
originally announced April 2021.
-
Electrochemical double layer capacitor using a microemulsion electrolyte
Authors:
Fraser R. Hughson,
Rohan Borah,
Thomas Nann
Abstract:
The use of aqueous electrolytes in energy storage devices is traditionally limited by the voltage stability window of water at 1.23 V. We present the use of a microemulsion based electrolyte which, although mostly water by mass, has a voltage stability window of up to 5 V. This allows the cost and safety benefits of aqueous electrolytes to finally be realised in high-voltage systems. Supercapacito…
▽ More
The use of aqueous electrolytes in energy storage devices is traditionally limited by the voltage stability window of water at 1.23 V. We present the use of a microemulsion based electrolyte which, although mostly water by mass, has a voltage stability window of up to 5 V. This allows the cost and safety benefits of aqueous electrolytes to finally be realised in high-voltage systems. Supercapacitors constructed using this electrolyte were able to achieve and maintain a capacitance of ~40 F/g and an energy density ~40 Wh/kg of with a Coulombic efficiency of 99\% for over 10,000 cycles on activated carbon.
△ Less
Submitted 8 November, 2020;
originally announced November 2020.
-
Suppressed self-discharge of an aqueous supercapacitor using Earth-abundant materials
Authors:
Samuel Devese,
Thomas Nann
Abstract:
Supercapacitors (aka electrostatic double-layer capacitors -- EDLCs) offer excellent power storage capacity and kinetics, but suffer under rapid self-discharge. We introduced a zeolite framework into the active capacitor electrode, with the goal to tailor the free desorption energy and thus the self-discharge rate of supercapacitors. Low-cost carbonaceous materials and benchtop production methods…
▽ More
Supercapacitors (aka electrostatic double-layer capacitors -- EDLCs) offer excellent power storage capacity and kinetics, but suffer under rapid self-discharge. We introduced a zeolite framework into the active capacitor electrode, with the goal to tailor the free desorption energy and thus the self-discharge rate of supercapacitors. Low-cost carbonaceous materials and benchtop production methods were used to create supercapacitor electrodes with a measured specific capacitance of 17.25 F g$^{-1}$, a coulombic efficiency of 100%, and charge retention of over 25% over 24 hours determined by galvanostatic charge/discharge curve measurements. This charge retention was an enhancement of $\sim$350% compared with electrodes without zeolite coating.
△ Less
Submitted 2 June, 2020;
originally announced June 2020.
-
High voltage carbon-based cathodes for non-aqueous aluminium-ion batteries
Authors:
Shalini Divya,
Thomas Nann
Abstract:
Four different forms of carbon: activated carbon (AC) from human hair, AC from hemp fibers, a carbon fullerene extract consisting of C$_{60}$ and C$_{70}$ fullerene (CFEx) and Super-P carbon black were tested and compared as cathodes for non-aqueous aluminium-ion batteries (AIBs). These materials differ in their general structure, porosity and morphology. Fullerenes display a crystalline structure…
▽ More
Four different forms of carbon: activated carbon (AC) from human hair, AC from hemp fibers, a carbon fullerene extract consisting of C$_{60}$ and C$_{70}$ fullerene (CFEx) and Super-P carbon black were tested and compared as cathodes for non-aqueous aluminium-ion batteries (AIBs). These materials differ in their general structure, porosity and morphology. Fullerenes display a crystalline structure, whereas hemp fibers, Super-P and hair are amorphous in nature. Of all materials, AC obtained from hair recorded the highest specific capacity after 50 cycles at 103 mAh g$^{-1}$ with a Coulombic efficiency of $\sim$90% at a current rate of 50 mA g$^{-1}$. Both hemp fibers and Super-P achieved their highest specific capacities at 56 mAh g$^{-1}$ and 84 mAh g$^{-1}$ respectively. CFEx recorded its highest capacity at 78 mAh g$^{-1}$ and maintained it for 50 cycles. The cells were charged and discharged to 2.45 V and 0.2 V respectively.
△ Less
Submitted 1 June, 2020; v1 submitted 29 May, 2020;
originally announced June 2020.
-
A C/V$_2$O$_5$ core-sheath nanofibrous cathode with mixed-ion intercalation for aluminium-ion batteries
Authors:
Nicolò Canever,
Thomas Nann
Abstract:
A new nanofibrous material, consisting of a conductive carbon core and an external layer made of vanadium oxide, has been studied as a cathode for aluminium-ion batteries. The material enables a mixed-ion intercalation mechanism, resulting in the alternating insertion of $\text{Al}^{3+}$ and $\text{AlCl}_4^-$ in the $\text{V}_2\text{O}_5$ and carbon layers, respectively. This is a highly desirable…
▽ More
A new nanofibrous material, consisting of a conductive carbon core and an external layer made of vanadium oxide, has been studied as a cathode for aluminium-ion batteries. The material enables a mixed-ion intercalation mechanism, resulting in the alternating insertion of $\text{Al}^{3+}$ and $\text{AlCl}_4^-$ in the $\text{V}_2\text{O}_5$ and carbon layers, respectively. This is a highly desirable feature for cathode materials which may increase the energy density of future batteries by optimising the utilisation of the electrolyte.
△ Less
Submitted 22 March, 2020; v1 submitted 27 January, 2020;
originally announced January 2020.
-
Solid-electrolyte interphases (SEI) in nonaqueous aluminum-ion batteries
Authors:
Nicolò Canever,
Fraser R. Hughson,
Thomas Nann
Abstract:
Nonaqueous aluminum-ion batteries are an interesting emerging energy storage technology, offering a plethora of advantages over existing grid energy storage solutions. Carbonaceous and graphitic materials are an appealing cathode material in this system, thanks to their low cost and excellent rate capabilities. The phenomenon of poor Coulombic efficiency in the first cycle, however, is a known iss…
▽ More
Nonaqueous aluminum-ion batteries are an interesting emerging energy storage technology, offering a plethora of advantages over existing grid energy storage solutions. Carbonaceous and graphitic materials are an appealing cathode material in this system, thanks to their low cost and excellent rate capabilities. The phenomenon of poor Coulombic efficiency in the first cycle, however, is a known issue among some types of carbons, the reasons for which are yet to be fully understood. In this work, we propose that such processes are caused by the formation of a solid-electrolyte interphase, in a similar fashion to graphite anodes in lithium-ion batteries. Using electrospun carbon nanofibers as a model material with tunable crystallinity, the cause of such phenomena was found to be linked to the presence of surface defects in the cathode material, and was further amplified by high surface area. The simple use of a binder polymer, however, helps mitigating the issue by shielding surface defects from direct contact with the electrolyte.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
Molybdenum dichalcogenide cathodes for aluminium-ion batteries
Authors:
Shalini Divya,
James H. Johnston,
Thomas Nann
Abstract:
Many successful battery electrodes are based on 2D-layered materials. We have studied aluminium-ion batteries using molybdenum dichalcogenides: \ce{MoS2}, \ce{MoSe2} and MoSSe as active cathode materials. The batteries showed clear discharge voltage plateaus in the ranges 1.6 - 1.4 V for \ce{MoS2} and \ce{MoSe2}, and 0.6 - 0.5 V for MoSSe. \ce{MoS2} and \ce{MoSe2} have similar crystal structures,…
▽ More
Many successful battery electrodes are based on 2D-layered materials. We have studied aluminium-ion batteries using molybdenum dichalcogenides: \ce{MoS2}, \ce{MoSe2} and MoSSe as active cathode materials. The batteries showed clear discharge voltage plateaus in the ranges 1.6 - 1.4 V for \ce{MoS2} and \ce{MoSe2}, and 0.6 - 0.5 V for MoSSe. \ce{MoS2} and \ce{MoSe2} have similar crystal structures, interestingly we found that \ce{MoSe2} performed better than \ce{MoS2}. MoSSe exhibited a higher specific capacity over \ce{MoS2} and \ce{MoSe2}, but the energy density was lower than \ce{MoSe2} at a current rate of 40 mA g$^{-1}$. \ce{MoSe2} cells recorded a discharge capacity of $\sim$ 110 mAh g$^{-1}$ with an average potential in the range of 2.0 - 1.8 V and 1.5 - 0.8 V during discharge. The cells were stable at 100 mA g$^{-1}$ for over 200 cycles with 90\% coulombic efficiency.
△ Less
Submitted 30 March, 2020; v1 submitted 22 December, 2019;
originally announced December 2019.
