-
Programmable Photonic Unitary Processor Enables Parametrized Differentiable Long-Haul Spatial Division Multiplexed Transmission
Authors:
Mitsumasa Nakajima,
Kohki Shibahara,
Kohei Ikeda,
Akira Kawai,
Masaya Notomi,
Yutaka Miyamoto,
Toshikazu Hashimoto
Abstract:
The explosive growth of global data traffic demands scalable and energy-efficient optical communication systems. Spatial division multiplexing (SDM) using multicore or multimode fibers is a promising solution to overcome the capacity limit of single-mode fibers. However, long-haul SDM transmission faces significant challenges due to modal dispersion, which imposes heavy computational loads on digi…
▽ More
The explosive growth of global data traffic demands scalable and energy-efficient optical communication systems. Spatial division multiplexing (SDM) using multicore or multimode fibers is a promising solution to overcome the capacity limit of single-mode fibers. However, long-haul SDM transmission faces significant challenges due to modal dispersion, which imposes heavy computational loads on digital signal processing (DSP) for signal equalization. Here, we propose parameterized SDM transmission, where programmable photonic unitary processors are installed at intermediate nodes. Instead of relying on conventional digital equalization only on the receiver side, our approach enables direct optimization of the SDM transmission channel itself by the programmable unitary processor, which reduces digital post-processing loads. We introduce a gradient-based optimization algorithm using a differentiable SDM transmission model to determine the optimal unitary transformation. As a key enabler, we first implemented telecom-grade programmable photonic unitary processor, achieving a low-loss (2.1 dB fiber-to-fiber), wideband (full C-band), polarization-independent, and high-fidelity (R2>96% across the C-band) operation. We experimentally demonstrate 1300-km transmission using a three-mode fiber, achieving strong agreement between simulation and experiment. The optimized photonic processor significantly reduces modal dispersion and post-processing complexity. Our results establish a scalable framework for integrating photonic computation into the optical layer, enabling more efficient, high-capacity optical networks.
△ Less
Submitted 22 May, 2025;
originally announced May 2025.
-
Quantifying the amplitudes of ultrafast magnetization fluctuations in Sm$_{0.7}$Er$_{0.3}$FeO$_{3}$ using femtosecond noise correlation spectroscopy
Authors:
M. A. Weiss,
F. S. Herbst,
G. Skobjin,
S. Eggert,
M. Nakajima,
D. Reustlen,
A. Leitenstorfer,
S. T. B. Goennenwein,
T. Kurihara
Abstract:
Spin fluctuations are an important issue for the design and operation of future spintronic devices. Femtosecond noise correlation spectroscopy (FemNoC) was recently applied to detect ultrafast magnetization fluctuations. FemNoC gives direct access to the spontaneous fluctuations of the magnetization in magnetically ordered materials. In FemNoC experiments, the magnetic fluctuations are imprinted o…
▽ More
Spin fluctuations are an important issue for the design and operation of future spintronic devices. Femtosecond noise correlation spectroscopy (FemNoC) was recently applied to detect ultrafast magnetization fluctuations. FemNoC gives direct access to the spontaneous fluctuations of the magnetization in magnetically ordered materials. In FemNoC experiments, the magnetic fluctuations are imprinted on the polarization state of two independent femtosecond probe pulses upon transmission through a magnetic sample. Using a subharmonic demodulation scheme, the cross-correlation of the signals from both pulse trains is calculated. Here, we quantitatively link the FemNoC output signal to an optical polarization rotation, and then in turn to the magnitude of the inherent spin fluctuations. To this end, three different calibration protocols are presented and compared in accuracy. Ultimately, we quantitatively determine both the variance of optical polarization noise in rad$^2$, and that of the ultrafast magnetization fluctuations in (A/m)$^2$.
△ Less
Submitted 29 January, 2025;
originally announced January 2025.
-
X-Raying Neutral Density Disturbances in the Mesosphere and Lower Thermosphere induced by the 2022 Hunga-Tonga Volcano Eruption-Explosion
Authors:
Satoru Katsuda,
Hiroyuki Shinagawa,
Hitoshi Fujiwara,
Hidekatsu Jin,
Yasunobu Miyoshi,
Yoshizumi Miyoshi,
Yuko Motizuki,
Motoki Nakajima,
Kazuhiro Nakazawa,
Kumiko K. Nobukawa,
Yuichi Otsuka,
Atsushi Shinbori,
Takuya Sori,
Chihiro Tao,
Makoto S. Tashiro,
Yuuki Wada,
Takaya Yamawaki
Abstract:
We present X-ray observations of the upper atmospheric density disturbance caused by the explosive eruption of the Hunga Tonga-Hunga Ha'apai (HTHH) volcano on 15 January 2022. From 14 January to 16 January, the Chinese X-ray astronomy satellite, Insight-HXMT, was observing the supernova remnant Cassiopeia A. The X-ray data obtained during Earth's atmospheric occultations allowed us to measure neut…
▽ More
We present X-ray observations of the upper atmospheric density disturbance caused by the explosive eruption of the Hunga Tonga-Hunga Ha'apai (HTHH) volcano on 15 January 2022. From 14 January to 16 January, the Chinese X-ray astronomy satellite, Insight-HXMT, was observing the supernova remnant Cassiopeia A. The X-ray data obtained during Earth's atmospheric occultations allowed us to measure neutral densities in the altitude range of ~90-150 km. The density profiles above 110 km altitude obtained before the major eruption are in reasonable agreement with expectations by both GAIA and NRLMSIS 2.0 models. In contrast, after the HTHH eruption, a severe density depletion was found up to ~1,000 km away from the epicenter, and a relatively weak depletion extending up to ~7,000 km for over 8 hr after the eruption. In addition, density profiles showed wavy structures with a typical length scale of either ~20 km (vertical) or ~1,000 km (horizontal). This may be caused by Lamb waves or gravity waves triggered by the volcanic eruption.
△ Less
Submitted 12 October, 2024;
originally announced October 2024.
-
Thermal and magnetic evolution of an Earth-like planet with a basal magma ocean
Authors:
Victor Lherm,
Miki Nakajima,
Eric G. Blackman
Abstract:
Earth's geodynamo has operated for over 3.5 billion years. The magnetic field is currently powered by thermocompositional convection in the outer core, which involves the release of light elements and latent heat as the inner core solidifies. However, since the inner core nucleated no more than 1.5 billion years ago, the early dynamo could not rely on these buoyancy sources. Given recent estimates…
▽ More
Earth's geodynamo has operated for over 3.5 billion years. The magnetic field is currently powered by thermocompositional convection in the outer core, which involves the release of light elements and latent heat as the inner core solidifies. However, since the inner core nucleated no more than 1.5 billion years ago, the early dynamo could not rely on these buoyancy sources. Given recent estimates of the thermal conductivity of the outer core, an alternative mechanism may be required to sustain the geodynamo prior to nucleation of the inner core. One possibility is a silicate dynamo operating in a long-lived basal magma ocean. Here, we investigate the structural, thermal, buoyancy, and magnetic evolution of an Earth-like terrestrial planet. Using modern equations of state and melting curves, we include a time-dependent parameterization of the compositional evolution of an iron-rich basal magma ocean. We combine an internal structure integration of the planet with energy budgets in a coupled core, basal magma ocean, and mantle system. We determine the thermocompositional convective stability of the core and the basal magma ocean, and assess their respective dynamo activity using entropy budgets and magnetic Reynolds numbers. Our conservative nominal model predicts a transient basal magma ocean dynamo followed by a core dynamo after 1 billion years. The model is sensitive to several parameters, including the initial temperature of the core-mantle boundary, the parameterization of mantle convection, the composition of the basal magma ocean, the radiogenic content of the planet, as well as convective velocity and magnetic scaling laws. We use the nominal model to constrain the range of basal magma ocean electrical conductivity and core thermal conductivity that sustain a dynamo.
△ Less
Submitted 9 September, 2024;
originally announced September 2024.
-
Composition, Structure and Origin of the Moon
Authors:
Paolo A. Sossi,
Miki Nakajima,
Amir Khan
Abstract:
Here we critically examine the geophysical and geochemical properties of the Moon in order to identify the extent to which dynamical scenarios satisfy these observations. New joint inversions of existing lunar geophysical data (mean mass, moment of inertia, and tidal response) assuming a laterally- and vertically homogeneous lunar mantle show that, in all cases, a core with a radius of 300$\pm$20…
▽ More
Here we critically examine the geophysical and geochemical properties of the Moon in order to identify the extent to which dynamical scenarios satisfy these observations. New joint inversions of existing lunar geophysical data (mean mass, moment of inertia, and tidal response) assuming a laterally- and vertically homogeneous lunar mantle show that, in all cases, a core with a radius of 300$\pm$20 km ($\sim$0.8 to 1.5 % the mass of the Moon) is required. However, an Earth-like Mg# (0.89) in the lunar mantle results in core densities (7800$\pm$100 kg/m$^3$) consistent with that of Fe-Ni alloy, whereas FeO-rich compositions (Mg# = 0.80--0.84) require lower densities (6100$\pm$800 kg/m$^3$). Geochemically, we use new data on mare basalts to reassess the bulk composition of the Moon for 70 elements, and show that the lunar core likely formed near 5 GPa, 2100 K and $\sim$1 log unit below the iron-wüstite buffer. Moreover, the Moon is depleted relative to the Earth's mantle in elements with volatilities higher than that of Li, with this volatile loss likely having occurred at low temperatures (1400$\pm$100 K), consistent with mass-dependent stable isotope fractionation of moderately volatile elements (e.g., Zn, K, Rb). The identical nucleosynthetic (O, Cr, Ti) and radiogenic (W) isotope compositions of the lunar and terrestrial mantles, strongly suggest the two bodies were made from the same material, rather than from an Earth-like impactor. Rb-Sr in FANs and Lu-Hf and Pb-Pb zircon ages point Moon formation close to $\sim$4500 Ma. Taken together, there is no unambiguous geochemical or isotopic evidence for the role of an impactor in the formation of the Moon, implying perfect equilibration between the proto-Earth and Moon-forming material or alternative scenarios for its genesis.
△ Less
Submitted 29 August, 2024;
originally announced August 2024.
-
Subharmonic lock-in detection and its optimisation for femtosecond noise correlation spectroscopy
Authors:
M. A. Weiss,
F. S. Herbst,
S. Eggert,
M. Nakajima,
A. Leitenstorfer,
S. T. B. Goennenwein,
T. Kurihara
Abstract:
Although often viewed as detrimental, fluctuations carry valuable information about the physical system from which they emerge. Femtosecond noise correlation spectroscopy (FemNoC) has recently been established to probe the ultrafast fluctuation dynamics of thermally populated magnons by measurement of their amplitude autocorrelation. Subharmonic lock-in detection is the key technique in this metho…
▽ More
Although often viewed as detrimental, fluctuations carry valuable information about the physical system from which they emerge. Femtosecond noise correlation spectroscopy (FemNoC) has recently been established to probe the ultrafast fluctuation dynamics of thermally populated magnons by measurement of their amplitude autocorrelation. Subharmonic lock-in detection is the key technique in this method, allowing to extract the pulse-to-pulse polarisation fluctuations of two femtosecond optical pulse trains transmitted through a magnetic sample. Here, we present a thorough technical description of the subharmonic demodulation technique and of the FemNoC measurement system. We mathematically model the data acquisition process and identify the essential parameters which critically influence the signal-to-noise ratio of the signals. Comparing the model calculations to real datasets allows validating the predicted parameter dependences and provides a means to optimise FemNoC experiments.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
Ncorpi$\mathcal{O}$N : A $\mathcal{O}(N)$ software for N-body integration in collisional and fragmenting systems
Authors:
Jérémy Couturier,
Alice C. Quillen,
Miki Nakajima
Abstract:
Ncorpi$\mathcal{O}$N is a $N$-body software developed for the time-efficient integration of collisional and fragmenting systems of planetesimals or moonlets orbiting a central mass. It features a fragmentation model, based on crater scaling and ejecta models, able to realistically simulate a violent impact. The user of Ncorpi$\mathcal{O}$N can choose between four different built-in modules to comp…
▽ More
Ncorpi$\mathcal{O}$N is a $N$-body software developed for the time-efficient integration of collisional and fragmenting systems of planetesimals or moonlets orbiting a central mass. It features a fragmentation model, based on crater scaling and ejecta models, able to realistically simulate a violent impact. The user of Ncorpi$\mathcal{O}$N can choose between four different built-in modules to compute self-gravity and detect collisions. One of these makes use of a mesh-based algorithm to treat mutual interactions in $\mathcal{O}(N)$ time. Another module, much more efficient than the standard Barnes-Hut tree code, is a $\mathcal{O}(N)$ tree-based algorithm called FalcON. It relies on fast multipole expansion for gravity computation and we adapted it to collision detection as well. Computation time is reduced by building the tree structure using a three-dimensional Hilbert curve. For the same precision in mutual gravity computation, Ncorpi$\mathcal{O}$N is found to be up to 25 times faster than the famous software REBOUND. Ncorpi$\mathcal{O}$N is written entirely in the C language and only needs a C compiler to run. A python add-on, that requires only basic python libraries, produces animations of the simulations from the output files. The name Ncorpi$\mathcal{O}$N, reminding of a scorpion, comes from the French $N$-corps, meaning $N$-body, and from the mathematical notation $\mathcal{O}(N)$, due to the running time of the software being almost linear in the total number $N$ of moonlets. Ncorpi$\mathcal{O}$N is designed for the study of accreting or fragmenting disks of planetesimal or moonlets. It detects collisions and computes mutual gravity faster than REBOUND, and unlike other $N$-body integrators, it can resolve a collision by fragmentation. The fast multipole expansions are implemented up to order six to allow for a high precision in mutual gravity computation.
△ Less
Submitted 26 March, 2024; v1 submitted 31 October, 2023;
originally announced October 2023.
-
An improved model of metal/silicate differentiation during Earth's accretion
Authors:
K. I. Dale,
D. C. Rubie,
M. Nakajima,
S. Jacobson,
G. Nathan,
G. J. Golabek,
S. Cambioni,
A. Morbidelli
Abstract:
We improved the algorithm presented in Rubie et al. (2015) to model the chemical evolution of Earth driven by iron/silicate differentiation during the planet's accretion. The pressure at which the equilibration occurs during a giant impact is no longer a free parameter but is determined by the smooth particle hydrodynamic (SPH) simulations of Nakajima et al. (2021). Moreover, impacting planetesima…
▽ More
We improved the algorithm presented in Rubie et al. (2015) to model the chemical evolution of Earth driven by iron/silicate differentiation during the planet's accretion. The pressure at which the equilibration occurs during a giant impact is no longer a free parameter but is determined by the smooth particle hydrodynamic (SPH) simulations of Nakajima et al. (2021). Moreover, impacting planetesimals are now assumed to be too small to cause melting and differentiation and thus their materials are stored in the crystalline upper mantle of the growing planet until a hydrostatically relaxed global magma ocean forms in the aftermath of a giant impact, whose depth is also estimated from Nakajima et al. (2021). With these changes, not all dynamical simulations lead to a satisfactory reproduction of the chemical composition of the bulk silicate Earth (BSE). Thus, the latter becomes diagnostic of the success of dynamical models. In the successful cases also the BSE abundances of W and Mo can be reproduced, that were previously hard to fit (Jennings et al., 2021).
△ Less
Submitted 8 August, 2023;
originally announced August 2023.
-
Long-Term Density Trend in the Mesosphere and Lower Thermosphere from Occultations of the Crab Nebula with X-Ray Astronomy Satellites
Authors:
Satoru Katsuda,
Teruaki Enoto,
Andrea N. Lommen,
Koji Mori,
Yuko Motizuki,
Motoki Nakajima,
Nathaniel C. Ruhl,
Kosuke Sato,
Gunter Stober,
Makoto S. Tashiro,
Yukikatsu Terada,
Kent S. Wood
Abstract:
We present long-term density trends of the Earth's upper atmosphere at altitudes between 71 and 116 km, based on atmospheric occultations of the Crab Nebula observed with X-ray astronomy satellites, ASCA, RXTE, Suzaku, NuSTAR, and Hitomi. The combination of the five satellites provides a time period of 28 yr from 1994 to 2022. To suppress seasonal and latitudinal variations, we concentrate on the…
▽ More
We present long-term density trends of the Earth's upper atmosphere at altitudes between 71 and 116 km, based on atmospheric occultations of the Crab Nebula observed with X-ray astronomy satellites, ASCA, RXTE, Suzaku, NuSTAR, and Hitomi. The combination of the five satellites provides a time period of 28 yr from 1994 to 2022. To suppress seasonal and latitudinal variations, we concentrate on the data taken in autumn (49< doy <111) and spring (235< doy <297) in the northern hemisphere with latitudes of 0--40 degrees. With this constraint, local times are automatically limited either around noon or midnight. We obtain four sets (two seasons times two local times) of density trends at each altitude layer. We take into account variations due to a linear trend and the 11-yr solar cycle using linear regression techniques. Because we do not see significant differences among the four trends, we combine them to provide a single vertical profile of trend slopes. We find a negative density trend of roughly -5 %/decade at every altitude. This is in reasonable agreement with inferences from settling rate of the upper atmosphere. In the 100--110 km altitude, we found an exceptionally high density decline of about -12 %/decade. This peak may be the first observational evidence for strong cooling due to water vapor and ozone near 110 km, which was first identified in a numerical simulation by Akmaev et al. (2006). Further observations and numerical simulations with suitable input parameters are needed to establish this feature.
△ Less
Submitted 24 January, 2023;
originally announced February 2023.
-
Ultrafast spontaneous spin switching in an antiferromagnet
Authors:
Marvin A. Weiss,
Andreas Herbst,
Julius Schlegel,
Tobias Dannegger,
Martin Evers,
Andreas Donges,
Makoto Nakajima,
Alfred Leitenstorfer,
Sebastian T. B. Goennenwein,
Ulrich Nowak,
Takayuki Kurihara
Abstract:
Owing to their high magnon frequencies, antiferromagnets are key materials for future high-speed spintronics. Picosecond switching of antiferromagnetic order has been viewed a milestone for decades and pursued only by using ultrafast external perturbations. Here, we show that picosecond spin switching occurs spontaneously due to thermal fluctuations in the antiferromagnetic orthoferrite Sm0.7Er0.3…
▽ More
Owing to their high magnon frequencies, antiferromagnets are key materials for future high-speed spintronics. Picosecond switching of antiferromagnetic order has been viewed a milestone for decades and pursued only by using ultrafast external perturbations. Here, we show that picosecond spin switching occurs spontaneously due to thermal fluctuations in the antiferromagnetic orthoferrite Sm0.7Er0.3FeO3. By analysing the correlation between the pulse-to-pulse polarisation fluctuations of two femtosecond optical probes, we extract the autocorrelation of incoherent magnon fluctuations. We observe a strong enhancement of the magnon fluctuation amplitude and the coherence time around the critical temperature of the spin reorientation transition. The spectrum shows two distinct modes, one corresponding to the quasi-ferromagnetic mode and another one which has not been previously reported in pump-probe experiments. Comparison to a stochastic spin dynamics simulation reveals this new mode as smoking gun of ultrafast spontaneous spin switching within the double-well anisotropy potential.
△ Less
Submitted 5 January, 2023;
originally announced January 2023.
-
Development of an interactive code for quick data analyses between STOR-M tokamak experimental plasma discharges
Authors:
Masaru Nakajima,
Debjyoti Basu,
A. V. Melnikov,
David McColl,
Chijin Xiao
Abstract:
Saskatchewan Torus-Modified (STOR-M) is a small tokamak, well known for various fusion related basic experimental studies such as edge turbulent heating, different instabilities, AC (alternating current) tokamak operation, Ohmic H-mode triggering by the electrode biasing, fueling and momentum injection by Compact Torus (CT) injection, and effects of Resonance Magnetic Perturbations (RMP), among ot…
▽ More
Saskatchewan Torus-Modified (STOR-M) is a small tokamak, well known for various fusion related basic experimental studies such as edge turbulent heating, different instabilities, AC (alternating current) tokamak operation, Ohmic H-mode triggering by the electrode biasing, fueling and momentum injection by Compact Torus (CT) injection, and effects of Resonance Magnetic Perturbations (RMP), among others. Some of those experiments require real time visualization of magnetic surface reconstructions either through EFIT or quick analyses and visualization of experimental data during experiments. Recently experimental studies of Geodesic Acoustic Mode (GAM) and zonal flows had been performed in STOR-M tokamak. The GAM experiments strongly require collection of fluctuations data from different Langmuir probes installed at different poloidal locations, but on the same magnetic surfaces. This is need of the adjustment of radial locations between discharges. It is therefore important to analyze and visualize the features of all probe data quickly during discharges. For this purpose, a Python code has been developed and used for quick analyze of data. This article will describe the development of the code using Python and its use in detail.
△ Less
Submitted 16 June, 2022;
originally announced June 2022.
-
Physical Deep Learning with Biologically Plausible Training Method
Authors:
Mitsumasa Nakajima,
Katsuma Inoue,
Kenji Tanaka,
Yasuo Kuniyoshi,
Toshikazu Hashimoto,
Kohei Nakajima
Abstract:
The ever-growing demand for further advances in artificial intelligence motivated research on unconventional computation based on analog physical devices. While such computation devices mimic brain-inspired analog information processing, learning procedures still relies on methods optimized for digital processing such as backpropagation. Here, we present physical deep learning by extending a biolo…
▽ More
The ever-growing demand for further advances in artificial intelligence motivated research on unconventional computation based on analog physical devices. While such computation devices mimic brain-inspired analog information processing, learning procedures still relies on methods optimized for digital processing such as backpropagation. Here, we present physical deep learning by extending a biologically plausible training algorithm called direct feedback alignment. As the proposed method is based on random projection with arbitrary nonlinear activation, we can train a physical neural network without knowledge about the physical system. In addition, we can emulate and accelerate the computation for this training on a simple and scalable physical system. We demonstrate the proof-of-concept using a hierarchically connected optoelectronic recurrent neural network called deep reservoir computer. By constructing an FPGA-assisted optoelectronic benchtop, we confirmed the potential for accelerated computation with competitive performance on benchmarks. Our results provide practical solutions for the training and acceleration of neuromorphic computation.
△ Less
Submitted 1 April, 2022;
originally announced April 2022.
-
Geophysical Evolution During Rocky Planet Formation
Authors:
Tim Lichtenberg,
Laura K. Schaefer,
Miki Nakajima,
Rebecca A. Fischer
Abstract:
Progressive astronomical characterization of planet-forming disks and rocky exoplanets highlight the need for increasing interdisciplinary efforts to understand the birth and life cycle of terrestrial worlds in a unified picture. Here, we review major geophysical and geochemical processes that shape the evolution of rocky planets and their precursor planetesimals during planetary formation and ear…
▽ More
Progressive astronomical characterization of planet-forming disks and rocky exoplanets highlight the need for increasing interdisciplinary efforts to understand the birth and life cycle of terrestrial worlds in a unified picture. Here, we review major geophysical and geochemical processes that shape the evolution of rocky planets and their precursor planetesimals during planetary formation and early evolution, and how these map onto the astrophysical timeline and varying accretion environments of planetary growth. The evolution of the coupled core-mantle-atmosphere system of growing protoplanets diverges in thermal, compositional, and structural states to first order, and ultimately shapes key planetary characteristics that can discern planets harboring clement surface conditions from those that do not. Astronomical campaigns seeking to investigate rocky exoplanets will require significant advances in laboratory characterization of planetary materials and time- and spatially-resolved theoretical models of planetary evolution, to extend planetary science beyond the Solar System and constrain the origins and frequency of habitable worlds like our own.
△ Less
Submitted 18 March, 2022;
originally announced March 2022.
-
Spin canting in nonlinear terahertz magnon dynamics revealed by magnetorefractive probing in orthoferrite
Authors:
Takayuki Kurihara,
Motoaki Bamba,
Hiroshi Watanabe,
Makoto Nakajima,
Tohru Suemoto
Abstract:
We excite the spin precession in rare-earth orthoferrite YFeO3 by the magnetic field of intense terahertz pulse and probe its dynamics by transient absorption change in the near infrared. The observed waveforms contain quasi-ferromagnetic-mode magnon oscillation and its second harmonics with a comparably strong amplitude. The result can be explained by dielectric function derived from magnetorefra…
▽ More
We excite the spin precession in rare-earth orthoferrite YFeO3 by the magnetic field of intense terahertz pulse and probe its dynamics by transient absorption change in the near infrared. The observed waveforms contain quasi-ferromagnetic-mode magnon oscillation and its second harmonics with a comparably strong amplitude. The result can be explained by dielectric function derived from magnetorefractive Hamiltonian. We reveal that the strong second harmonic signal microscopically originates from novel dynamics of the quasi-ferromagnetic mode magnon at nonlinear regime, wherein spin canting angle periodically oscillates.
△ Less
Submitted 23 February, 2022;
originally announced February 2022.
-
Complementary junction field-effect transistor logic gate operational at 300$^\circ$C with 1.4 V supply voltage
Authors:
Mitsuaki Kaneko,
Masashi Nakajima,
Qimin Jin,
Tsunenobu Kimoto
Abstract:
Integrated circuits (ICs) that can operate at high temperature have a wide variety of applications in the fields of automotive, aerospace, space exploration, and deep-well drilling. Conventional silicon-based complementary metal-oxide-semiconductor (CMOS) circuits cannot work at higher than 200 $^\circ$C, leading to the use of wide bandgap semiconductor, especially silicon carbide (SiC). However,…
▽ More
Integrated circuits (ICs) that can operate at high temperature have a wide variety of applications in the fields of automotive, aerospace, space exploration, and deep-well drilling. Conventional silicon-based complementary metal-oxide-semiconductor (CMOS) circuits cannot work at higher than 200 $^\circ$C, leading to the use of wide bandgap semiconductor, especially silicon carbide (SiC). However, high-density defects at an oxide-SiC interface make it impossible to predict electrical characteristics of SiC CMOS logic gates in a wide temperature range and high supply voltage (typically ${\geqq 15}$ V) is required to compensate their large logic threshold voltage shift. Here, we show that SiC complementary logic gates composed of p- and n-channel junction field-effect transistors (JFETs) operate at 300 $^\circ$C with a supply voltage as low as 1.4 V. The logic threshold voltage shift of the complementary JFET (CJFET) inverter is 0.2 V from room temperature to 300 $^\circ$C. Furthermore, temperature dependencies of the static and dynamic characteristics of the CJFET inverter are well explained by a simple analytical model of SiC JFETs. This allows us to perform electronic circuit simulation, leading to superior designability of complex circuits or memories based on SiC CJFET technology, which operate within a wide temperature range.
△ Less
Submitted 17 June, 2021;
originally announced June 2021.
-
Origin of the Moon
Authors:
Robin M. Canup,
Kevin Righter,
Nicolas Dauphas,
Kaveh Pahlevan,
Matija Ćuk,
Simon J. Lock,
Sarah T. Stewart,
Julien Salmon,
Raluca Rufu,
Miki Nakajima,
Tomáš Magna
Abstract:
The Earth-Moon system is unusual in several respects. The Moon is roughly 1/4 the radius of the Earth - a larger satellite-to-planet size ratio than all known satellites other than Pluto's Charon. The Moon has a tiny core, perhaps with only ~1% of its mass, in contrast to Earth whose core contains nearly 30% of its mass. The Earth-Moon system has a high total angular momentum, implying a rapidly s…
▽ More
The Earth-Moon system is unusual in several respects. The Moon is roughly 1/4 the radius of the Earth - a larger satellite-to-planet size ratio than all known satellites other than Pluto's Charon. The Moon has a tiny core, perhaps with only ~1% of its mass, in contrast to Earth whose core contains nearly 30% of its mass. The Earth-Moon system has a high total angular momentum, implying a rapidly spinning Earth when the Moon formed. In addition, the early Moon was hot and at least partially molten with a deep magma ocean. Identification of a model for lunar origin that can satisfactorily explain all of these features has been the focus of decades of research.
△ Less
Submitted 2 March, 2021;
originally announced March 2021.
-
Neural Schrödinger Equation:Physical Law as Neural Network
Authors:
Mitsumasa Nakajima,
Kenji Tanaka,
Toshikazu Hashimoto
Abstract:
We show a new family of neural networks based on the Schrödinger equation (SE-NET). In this analogy, the trainable weights of the neural networks correspond to the physical quantities of the Schrödinger equation. These physical quantities can be trained using the complex-valued adjoint method. Since the propagation of the SE-NET can be described by the evolution of physical systems, its outputs ca…
▽ More
We show a new family of neural networks based on the Schrödinger equation (SE-NET). In this analogy, the trainable weights of the neural networks correspond to the physical quantities of the Schrödinger equation. These physical quantities can be trained using the complex-valued adjoint method. Since the propagation of the SE-NET can be described by the evolution of physical systems, its outputs can be computed by using a physical solver. As a demonstration, we implemented the SE-NET using the finite difference method. The trained network is transferable to actual optical systems. Based on this concept, we show a numerical demonstration of end-to-end machine learning with an optical frontend. Our results extend the application field of machine learning to hybrid physical-digital optimizations.
△ Less
Submitted 4 April, 2022; v1 submitted 24 June, 2020;
originally announced June 2020.
-
Novel method of developing broad band AC biasing power amplifier for online turbulent feedback experiment in STOR-M tokamak
Authors:
Debjyoti Basua,
Masaru Nakajimaa,
A. V. Melnikov,
David McColl,
Chijin Xiao,
Akira Hirose
Abstract:
A pulsed oscillating power amplifier has been developed for high frequency biasing\cite{kn:deb1} and real time turbulent feedback experiment in STOR-M tokamak. It is capable to provide output peak to peak oscillating voltage of around $\pm60$V and current around 30A within frequency band 1kHz-50kHz without any distortion of any waveform signal. Overall output power is amplified by two stages power…
▽ More
A pulsed oscillating power amplifier has been developed for high frequency biasing\cite{kn:deb1} and real time turbulent feedback experiment in STOR-M tokamak. It is capable to provide output peak to peak oscillating voltage of around $\pm60$V and current around 30A within frequency band 1kHz-50kHz without any distortion of any waveform signal. Overall output power is amplified by two stages power mosfet op-amp as well as nine identical push-pull amplifiers which are parallel connected in final stages. The power amplifier input signal, collected from plasma floating potential during plasma shot, is optically isolated with tokamak vessel for real time feedback experiment. Here, filtered floating potential fluctuations having band width between 5kHz-40kHz has been amplified and fed to an electrode inserted into the plasma edge to study response of plasma turbulence. It is observed that magnetic fluctuations are suppressed due to real time feedback of floating potential.
△ Less
Submitted 21 April, 2020;
originally announced April 2020.
-
Application of high frequency biasing and its effect in STOR-M tokamak
Authors:
Debjyoti Basu,
Masaru Nakajima,
A. V. Melnikov,
Julio J. Martinell,
David McColl,
Raj Singh,
Chijin Xiao,
Akira Hirose
Abstract:
A pulsed oscillating power amplifier has been developed to apply high frequency biasing voltage to an electrode at the edge of the STOR-M tokamak plasma. The power amplifier can deliver a peak-to-peak oscillating voltage up to 120V and current 30A within the frequency range of 1kHz-50kHz. The electrode is located in the equatorial plane at radius $ρ= 0.88$. The frequency of the applied voltage has…
▽ More
A pulsed oscillating power amplifier has been developed to apply high frequency biasing voltage to an electrode at the edge of the STOR-M tokamak plasma. The power amplifier can deliver a peak-to-peak oscillating voltage up to 120V and current 30A within the frequency range of 1kHz-50kHz. The electrode is located in the equatorial plane at radius $ρ= 0.88$. The frequency of the applied voltage has been varied between discharges. It is observed that the plasma density and soft x-ray intensity from the plasma core region usually increase at lower frequency regime 1kHz-5kHz as well as relatively higher frequency regime 20kHz-25kHz but seldom increase in between them. Increment of $τ_{p}$ \& $τ_{E}$ have been observed from the derivations of experimental data in both frequency regimes. Transport simulation has been carried out using the ASTRA simulation code for STOR-M tokamak parameters to understand the physical process behind experimental observations at higher frequency branch. The model is based on GAM excitement at resonance frequency associated with Ware-pinch due to oscillating electric field produced by biasing voltage which can suppress anomalous transport. Simulation results reproduce the experiment quite well in terms of the density, particle confinement as well as energy confinement time evolution. All those results indicate high frequency biasing is capable of improving confinement efficiently.
△ Less
Submitted 29 February, 2020; v1 submitted 8 November, 2019;
originally announced November 2019.
-
Quantized conductance observed during sintering of silver nanoparticles by intense terahertz pulses
Authors:
Keisuke Takano,
Hirofumi Harada,
Masashi Yoshimura,
Makoto Nakajima
Abstract:
We show that silver nanoparticles, which are deposited on a terahertz-receiving antenna, can be sintered by intense terahertz pulse irradiation. The conductance of the silver nanoparticles between the antenna electrodes is measured under the terahertz pulse irradiation. The dispersant materials surrounding the nanoparticles are peeled off, and conduction paths are created. We reveal that, during s…
▽ More
We show that silver nanoparticles, which are deposited on a terahertz-receiving antenna, can be sintered by intense terahertz pulse irradiation. The conductance of the silver nanoparticles between the antenna electrodes is measured under the terahertz pulse irradiation. The dispersant materials surrounding the nanoparticles are peeled off, and conduction paths are created. We reveal that, during sintering, quantum point contacts are formed, leading to quantized conductance between the electrodes with the conductance quantum, which reflects the formation of atomically thin wires. The terahertz electric pulses are sufficiently intense to activate electromigration, i.e., transfer of kinetic energy from the electrons to the silver atoms. The silver atoms move and atomically thin wires form under the intense terahertz pulse irradiation. These findings may inspire nanoscale structural processing by terahertz pulse irradiation
△ Less
Submitted 19 April, 2018;
originally announced April 2018.
-
Energy loss of terahertz electromagnetic waves by nano-sized connections in near-self-complementary metallic checkerboard patterns
Authors:
Keisuke Takano,
Yoku Tanaka,
Gabriel Moreno,
Abdallah Chahadih,
Abbas Ghaddar,
Xiang-Lei Han,
François Vaurette,
Yosuke Nakata,
Fumiaki Miyamaru,
Makoto Nakajima,
Masanori Hangyo,
Tahsin Akalin
Abstract:
The design of a self-complementary metallic checkerboard pattern achieves broadband, dispersion-less, and maximized absorption, concentrating in the deep subwavelength resistive connections between squares, without any theoretical limitation on the energy absorbing area. Here, we experimentally and numerically investigate the electromagnetic response in the limit of extremely small connections. We…
▽ More
The design of a self-complementary metallic checkerboard pattern achieves broadband, dispersion-less, and maximized absorption, concentrating in the deep subwavelength resistive connections between squares, without any theoretical limitation on the energy absorbing area. Here, we experimentally and numerically investigate the electromagnetic response in the limit of extremely small connections. We show that finite conductivity and randomness in a near-self-complementary checkerboard pattern plays a crucial role in producing a frequency-independent energy loss in the terahertz frequency region. Here metals behave like an almost perfect conductor. When the checkerboard pattern approaches the perfect self-complementary pattern, the perfect conductor approximation spontaneously breaks down, owing to the finite conductivity at the nano- scale connection, leading to broadband absorption. It is also shown that the random connections between metallic squares also lead to broadband and maximized energy loss through scattering loss, similar to finite conductivity.
△ Less
Submitted 10 August, 2017;
originally announced August 2017.
-
Strange Inter-layer Properties of $Ba(Fe_{1-x}Co_x)2As_2$ Appearing in Ultrasonic Measurements
Authors:
S. Simayi,
K. Sakano,
H. Takezawa,
M. Nakamura,
Y. Nakanishi,
K. Kihou,
M. Nakajima,
C. Lee,
A. Iyo,
H. Eisaki,
S. Uchida,
M. Yoshizawa
Abstract:
We have investigated the elastic constant C33 of Ba(Fe1-xCox)2As2 with eight different Co concentrations by ultrasonic measurement. We found remarkable elastic anomalies near the quantum critical point. We have studied them by measuring the electrical resistivity, heat capacity, and ultrasonic attenuation in addition to the elastic constant. These results have revealed that the inter-layer three-d…
▽ More
We have investigated the elastic constant C33 of Ba(Fe1-xCox)2As2 with eight different Co concentrations by ultrasonic measurement. We found remarkable elastic anomalies near the quantum critical point. We have studied them by measuring the electrical resistivity, heat capacity, and ultrasonic attenuation in addition to the elastic constant. These results have revealed that the inter-layer three-dimensional properties appearing in C33 to be possibly originated from the magnetic character of these materials. Our data about the elastic constant C33 highlight the importance of controlling the c-axis length in the emergence of superconductivity in iron-based superconductors.
△ Less
Submitted 9 October, 2013;
originally announced October 2013.
