Showing 1–36 of 36 results for author: Mueller, L

AUGUR, A flexible and efficient optimization algorithm for identification of optimal adsorption sites

Authors: Ioannis Kouroudis, Poonam, Neel Misciaci, Felix Mayr, Leon Müller, Zhaosu Gu, Alessio Gagliardi

Abstract: In this paper, we propose a novel flexible optimization pipeline for determining the optimal adsorption sites, named AUGUR (Aware of Uncertainty Graph Unit Regression). Our model combines graph neural networks and Gaussian processes to create a flexible, efficient, symmetry-aware, translation, and rotation-invariant predictor with inbuilt uncertainty quantification. This predictor is then used as… ▽ More In this paper, we propose a novel flexible optimization pipeline for determining the optimal adsorption sites, named AUGUR (Aware of Uncertainty Graph Unit Regression). Our model combines graph neural networks and Gaussian processes to create a flexible, efficient, symmetry-aware, translation, and rotation-invariant predictor with inbuilt uncertainty quantification. This predictor is then used as a surrogate for a data-efficient Bayesian Optimization scheme to determine the optimal adsorption positions. This pipeline determines the optimal position of large and complicated clusters with far fewer iterations than current state-of-the-art approaches. Further, it does not rely on hand-crafted features and can be seamlessly employed on any molecule without any alterations. Additionally, the pooling properties of graphs allow for the processing of molecules of different sizes by the same model. This allows the energy prediction of computationally demanding systems by a model trained on comparatively smaller and less expensive ones △ Less

Submitted 24 September, 2024; originally announced September 2024.

Comments: 17 pages 8 figures

Spatial structure facilitates evolutionary rescue by drug resistance

Authors: Cecilia Fruet, Ella Linxia Müller, Claude Loverdo, Anne-Florence Bitbol

Abstract: Bacterial populations often have complex spatial structures, which can impact their evolution. Here, we study how spatial structure affects the evolution of antibiotic resistance in a bacterial population. We consider a minimal model of spatially structured populations where all demes (i.e., subpopulations) are identical and connected to each other by identical migration rates. We show that spatia… ▽ More Bacterial populations often have complex spatial structures, which can impact their evolution. Here, we study how spatial structure affects the evolution of antibiotic resistance in a bacterial population. We consider a minimal model of spatially structured populations where all demes (i.e., subpopulations) are identical and connected to each other by identical migration rates. We show that spatial structure can facilitate the survival of a bacterial population to antibiotic treatment, starting from a sensitive inoculum. Specifically, the bacterial population can be rescued if antibiotic resistant mutants appear and are present when drug is added, and spatial structure can impact the fate of these mutants and the probability that they are present. Indeed, the probability of fixation of neutral or deleterious mutations providing drug resistance is increased in smaller populations. This promotes local fixation of resistant mutants in the structured population, which facilitates evolutionary rescue by drug resistance in the rare mutation regime. Once the population is rescued by resistance, migrations allow resistant mutants to spread in all demes. Our main result that spatial structure facilitates evolutionary rescue by antibiotic resistance extends to more complex spatial structures, and to the case where there are resistant mutants in the inoculum. △ Less

Submitted 20 December, 2024; v1 submitted 11 September, 2024; originally announced September 2024.

Constructing multicomponent cluster expansions with machine-learning and chemical embedding

Authors: Yann L. Müller, Anirudh Raju Natarajan

Abstract: Cluster expansions are commonly employed as surrogate models to link the electronic structure of an alloy to its finite-temperature properties. Using cluster expansions to model materials with several alloying elements is challenging due to a rapid increase in the number of fitting parameters and training set size. We introduce the embedded cluster expansion (eCE) formalism that enables the parame… ▽ More Cluster expansions are commonly employed as surrogate models to link the electronic structure of an alloy to its finite-temperature properties. Using cluster expansions to model materials with several alloying elements is challenging due to a rapid increase in the number of fitting parameters and training set size. We introduce the embedded cluster expansion (eCE) formalism that enables the parameterization of accurate on-lattice surrogate models for alloys containing several chemical species. The eCE model simultaneously learns a low dimensional embedding of site basis functions along with the weights of an energy model. A prototypical senary alloy comprised of elements in groups 5 and 6 of the periodic table is used to demonstrate that eCE models can accurately reproduce ordering energetics of complex alloys without a significant increase in model complexity. Further, eCE models can leverage similarities between chemical elements to efficiently extrapolate into compositional spaces that are not explicitly included in the training dataset. The eCE formalism presented in this study unlocks the possibility of employing cluster expansion models to study multicomponent alloys containing several alloying elements. △ Less

Submitted 30 January, 2025; v1 submitted 9 September, 2024; originally announced September 2024.

Time-space encoded readout for noise suppression and scalable scanning in optically active solid-state spin systems

Authors: Joachim P. Leibold, Nick R. von Grafenstein, Xiaoxun Chen, Linda Müller, Karl D. Briegel, Dominik B. Bucher

Abstract: Optically active solid-state spin systems play an important role in quantum technologies. We introduce a new readout scheme, termed Time to Space (T2S) encoding which decouples spin manipulation from optical readout both temporally and spatially. This is achieved by controlling the spin state within a region of interest, followed by rapid scanning of the optical readout position using an acousto-o… ▽ More Optically active solid-state spin systems play an important role in quantum technologies. We introduce a new readout scheme, termed Time to Space (T2S) encoding which decouples spin manipulation from optical readout both temporally and spatially. This is achieved by controlling the spin state within a region of interest, followed by rapid scanning of the optical readout position using an acousto-optic modulator. Time tracking allows the optical readout position to be encoded as a function of time. Using nitrogen-vacancy (NV) center ensembles in diamond, we first demonstrate that the T2S scheme enables correlated experiments for efficient common mode noise cancellation in various nano- and microscale sensing scenarios. In the second example, we show highly scalable multi-pixel imaging that does not require a camera and has the potential to accelerate data acquisition by several hundred times compared to conventional scanning methods. We anticipate widespread adoption of this technique, as it requires no additional components beyond those commonly used in optically addressable spin systems. △ Less

Submitted 27 August, 2024; originally announced August 2024.

Two-color Ytterbium MOT in a compact dual-chamber setup

Authors: Xin Wang, Thilina Muthu-Arachchige, Tangi Legrand, Ludwig Müller, Wolfgang Alt, Sebastian Hofferberth, Eduardo Uruñuela

Abstract: We present an experimental scheme for producing ultracold Ytterbium atoms in a compact dual-chamber setup. A dispenser-loaded two-dimensional (2D) magneto-optical trap (MOT) using permanent magnets and operating on the broad $^1S_0\to {}^1P_1$ singlet transition delivers over $10^7$ atoms per second through a differential pumping stage into a three-dimensional (3D) MOT. The two-color 3D MOT uses t… ▽ More We present an experimental scheme for producing ultracold Ytterbium atoms in a compact dual-chamber setup. A dispenser-loaded two-dimensional (2D) magneto-optical trap (MOT) using permanent magnets and operating on the broad $^1S_0\to {}^1P_1$ singlet transition delivers over $10^7$ atoms per second through a differential pumping stage into a three-dimensional (3D) MOT. The two-color 3D MOT uses the broad singlet transition to accumulate $\sim\!2\times 10^7$ atoms of $^{174}\text{Yb}$ within $2.5~\text{s}$ and subsequently the narrow $^1S_0\to {}^3P_1$ intercombination line to cool the atomic cloud to below $10~\mathrm{μK}$. We report optimized parameters for each stage of the atom collection sequence, achieving high transfer efficiency. We find that shelving into the triplet state during the broad-transition MOT almost doubles the number of trapped atoms. △ Less

Submitted 9 December, 2024; v1 submitted 6 August, 2024; originally announced August 2024.

Quantum-Inspired Fluid Simulation of 2D Turbulence with GPU Acceleration

Authors: Leonhard Hölscher, Pooja Rao, Lukas Müller, Johannes Klepsch, Andre Luckow, Tobias Stollenwerk, Frank K. Wilhelm

Abstract: Tensor network algorithms can efficiently simulate complex quantum many-body systems by utilizing knowledge of their structure and entanglement. These methodologies have been adapted recently for solving the Navier-Stokes equations, which describe a spectrum of fluid phenomena, from the aerodynamics of vehicles to weather patterns. Within this quantum-inspired paradigm, velocity is encoded as matr… ▽ More Tensor network algorithms can efficiently simulate complex quantum many-body systems by utilizing knowledge of their structure and entanglement. These methodologies have been adapted recently for solving the Navier-Stokes equations, which describe a spectrum of fluid phenomena, from the aerodynamics of vehicles to weather patterns. Within this quantum-inspired paradigm, velocity is encoded as matrix product states (MPS), effectively harnessing the analogy between interscale correlations of fluid dynamics and entanglement in quantum many-body physics. This particular tensor structure is also called quantics tensor train (QTT). By utilizing NVIDIA's cuQuantum library to perform parallel tensor computations on GPUs, our adaptation speeds up simulations by up to 12.1 times. This allows us to study the algorithm in terms of its applicability, scalability, and performance. By simulating two qualitatively different but commonly encountered 2D flow problems at high Reynolds numbers up to $1\times10^7$ using a fourth-order time stepping scheme, we find that the algorithm has a potential advantage over direct numerical simulations in the turbulent regime as the requirements for grid resolution increase drastically. In addition, we derive the scaling $χ=\mathcal{O}(\text{poly}(1/ε))$ for the maximum bond dimension $χ$ of MPS representing turbulent flow fields, with an error $ε$, based on the spectral distribution of turbulent kinetic energy. Our findings motivate further exploration of related quantum algorithms and other tensor network methods. △ Less

Submitted 25 June, 2024; originally announced June 2024.

THz-Driven Coherent Magnetization Dynamics in a Labyrinth Domain State

Authors: M Riepp, A Philippi-Kobs, L Mueller, R Froemter, W Roseker, R Rysov, M Walther, K Bagschik, M Hennes, D Gupta, S Marotzke, S Bajt, R Pan, T Golz, N Stojanovic, C Boeglin, G Gruebel

Abstract: Terahertz (THz) light pulses can be used for an ultrafast coherent manipulation of the magnetization. Driving the magnetization at THz frequencies is currently the fastest way of writing magnetic information in ferromagnets. Using time-resolved resonant magnetic scattering, we gain new insights to the THz-driven coherent magnetization dynamics on nanometer length scales. We observe ultrafast demag… ▽ More Terahertz (THz) light pulses can be used for an ultrafast coherent manipulation of the magnetization. Driving the magnetization at THz frequencies is currently the fastest way of writing magnetic information in ferromagnets. Using time-resolved resonant magnetic scattering, we gain new insights to the THz-driven coherent magnetization dynamics on nanometer length scales. We observe ultrafast demagnetization and coherent magnetization oscillations that are governed by a time-dependent damping. This damping is determined by the interplay of lattice heating and magnetic anisotropy reduction revealing an upper speed limit for THz-induced magnetization switching. We show that in the presence of nanometer-sized magnetic domains, the ultrafast magnetization oscillations are associated with a correlated beating of the domain walls. The overall domain structure thereby remains largely unaffected which highlights the applicability of THz-induced switching on the nanoscale. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 10 pages, 8 figures and 54 references

Numerical and Experimental Investigation of A Three-Axis Free Rotation Wind Tunnel Model

Authors: Laurène Muller, Michel Libsig, Bastien Martinez, Denis Bidino, Myriam Bastide, Yannick Bailly, Jean-Claude Roy

Abstract: The current need of improving performance in terms of control and aerodynamic efficiency of ammunitions leads to the necessity of performing accurate flying geometry characterizations. Therefore, new investigation methods are developed in order to increase the aerodynamic knowledge. Free flight measurements experiments are the most common way to obtain dynamic aerodynamic coefficients. However, th… ▽ More The current need of improving performance in terms of control and aerodynamic efficiency of ammunitions leads to the necessity of performing accurate flying geometry characterizations. Therefore, new investigation methods are developed in order to increase the aerodynamic knowledge. Free flight measurements experiments are the most common way to obtain dynamic aerodynamic coefficients. However, they do not always allow neither easy nor perfect measurements conditions. Currently ISL develops a stereovision method based wind-tunnel measurements methodology for investigation of a 3-axis free rotation model. This methods has been applied to the DREV-ISL reference model in order to compare coefficients obtained by this method with numerical results. △ Less

Submitted 15 May, 2023; originally announced May 2023.

Journal ref: 54th 3AF International Conference on Applied Aerodynamics, Association A{é}ronautique et Astronautique de France (3AF), Mar 2019, Paris, France

Ferroelectricity and resistive switching in BaTiO$_3$ thin films with liquid electrolyte top contact for bioelectronic devices

Authors: Maximilian T. Becker, Poppy Oldroyd, Nives Strkalj, Moritz L. Müller, George G. Malliaras, Judith L. MacManus-Driscoll

Abstract: We investigate ferroelectric- and resistive switching behavior in 18-nm-thick epitaxial BaTiO$_3$ (BTO) films in a model electrolyte-ferroelectric-semiconductor (EFS) configuration. The system is explored for its potential as a ferroelectric microelectrode in bioelectronics. The BTO films are grown by pulsed laser deposition (PLD) on semiconducting Nb-doped (0.5 wt\%) SrTiO$_{3}$ (Nb:STO) single c… ▽ More We investigate ferroelectric- and resistive switching behavior in 18-nm-thick epitaxial BaTiO$_3$ (BTO) films in a model electrolyte-ferroelectric-semiconductor (EFS) configuration. The system is explored for its potential as a ferroelectric microelectrode in bioelectronics. The BTO films are grown by pulsed laser deposition (PLD) on semiconducting Nb-doped (0.5 wt\%) SrTiO$_{3}$ (Nb:STO) single crystal substrates. The ferroelectric properties of the bare BTO films are demonstrated by piezoresponse force microscopy (PFM) measurements. Cyclic voltammetry (CV) measurements in EFS configuration, with phosphate buffered saline (PBS) acting as the liquid electrolyte top contact, indicate characteristic ferroelectric switching peaks in the bipolar current-voltage loop. The ferroelectric nature of the observed switching peaks is confirmed by analyzing the current response of the EFS devices to unipolar voltage signals. Moreover, electrochemical impedance spectroscopy (EIS) measurements indicate bipolar resisitive switching behavior of the EFS devices, which is controlled by the remanent polarization state of the BTO layer. Our results represent a constitutive step towards the realization of neuroprosthetic implants and hybrid neurocomputational systems based on ferroelectric microelectrodes. △ Less

Submitted 16 September, 2022; originally announced September 2022.

Scale Factor Determination for the GRACE-Follow On Laser Ranging Interferometer including Thermal Coupling

Authors: Malte Misfeldt, Vitali Müller, Laura Müller, Henry Wegener, Gerhard Heinzel

Abstract: The GRACE Follow-On satellites carry the very first inter-spacecraft Laser Ranging Interferometer (LRI). After more than four years in orbit, the LRI outperforms the sensitivity of the conventional Microwave Instrument (MWI). However, in the current data processing scheme, the LRI product still needs the MWI data to determine the unknown absolute laser frequency, representing the ruler for convert… ▽ More The GRACE Follow-On satellites carry the very first inter-spacecraft Laser Ranging Interferometer (LRI). After more than four years in orbit, the LRI outperforms the sensitivity of the conventional Microwave Instrument (MWI). However, in the current data processing scheme, the LRI product still needs the MWI data to determine the unknown absolute laser frequency, representing the ruler for converting the raw phase measurements into a physical displacement in meters. In this paper, we derive formulas for precisely performing that conversion from the phase measurement into a range, accounting for a varying carrier frequency. Furthermore, the dominant errors due to knowledge uncertainty of the carrier frequency as well as uncorrected time biases are derived. In the second part, we address the dependency of the LRI on the MWI in the currently employed cross-calibration scheme and present three different models for the LRI laser frequency, two of which are largely independent of the MWI. Furthermore, we analyze the contribution of thermal variations on the scale factor estimates and the LRI-MWI residuals. A linear model called Thermal Coupling (TC) is derived that significantly reduces the differences between LRI and MWI to a level where the MWI observations limit the comparison. △ Less

Submitted 21 November, 2022; v1 submitted 23 July, 2022; originally announced July 2022.

Comments: 26 pages, 15 figures

Electronic processes occurring during ultrafast demagnetization of cobalt triggered by X-ray photons tuned to Co L$_3$ resonance

Authors: Konrad J. Kapcia, Victor Tkachenko, Flavio Capotondi, Alexander Lichtenstein, Serguei Molodtsov, Leonard Mueller, Andre Philippi-Kobs, Przemysław Piekarz, Beata Ziaja

Abstract: Magnetization dynamics triggered with ultrashort laser pulses has been attracting significant attention, with strong focus on the dynamics excited by VIS/NIR pulses. Only recently, strong magnetic response in solid materials induced by intense X-ray pulses from free-electron lasers (FELs) has been observed. The exact mechanisms that trigger the X-ray induced demagnetization are not yet fully under… ▽ More Magnetization dynamics triggered with ultrashort laser pulses has been attracting significant attention, with strong focus on the dynamics excited by VIS/NIR pulses. Only recently, strong magnetic response in solid materials induced by intense X-ray pulses from free-electron lasers (FELs) has been observed. The exact mechanisms that trigger the X-ray induced demagnetization are not yet fully understood. They are subject of on-going experimental and theoretical investigations. Here, we present a theoretical analysis of electronic processes occurring during demagnetization of Co multilayer system irradiated by X-ray pulses tuned to L$_3$-absorption edge of cobalt. We show that, similarly as in the case of X-ray induced demagnetization at M-edge of Co, electronic processes play a predominant role in the demagnetization until the pulse fluence does not exceed the structural damage threshold. The impact of electronic processes can reasonably well explain the available experimental data, without a need to introduce the mechanism of stimulated elastic forward scattering. △ Less

Submitted 17 March, 2023; v1 submitted 13 July, 2022; originally announced July 2022.

Comments: 10 pages, 4 figures (7 panels), 57 references; pdfRevTeX class; double column formatting; two appendices and 18 references added; title changed; author-created version submitted to and accepted/published in Physical Review B journal. The text of the appendices (including detailed description of the model used) is similar to some parts of arXiv:2202.13845

Journal ref: Phys. Rev. B 107 (9), 094402 (1-9) (2023)

Comparing GRACE-FO KBR and LRI ranging data with focus on carrier frequency variations

Authors: Vitali Müller, Markus Hauk, Malte Misfeldt, Laura Müller, Henry Wegener, Yihao Yan, Gerhard Heinzel

Abstract: The GRACE Follow-On satellite mission measures distance variations between the two satellites in order to derive monthly gravity field maps, indicating mass variability on Earth on a few 100 km scale due to hydrology, seismology, climatology and others. This mission hosts two ranging instruments, a conventional microwave system based on K(a)-band ranging (KBR) and a novel laser ranging instrument… ▽ More The GRACE Follow-On satellite mission measures distance variations between the two satellites in order to derive monthly gravity field maps, indicating mass variability on Earth on a few 100 km scale due to hydrology, seismology, climatology and others. This mission hosts two ranging instruments, a conventional microwave system based on K(a)-band ranging (KBR) and a novel laser ranging instrument (LRI), both relying on interferometric phase readout. In this paper we show how the phase measurements can be converted into range data using a time-dependent carrier frequency (or wavelength) that takes potential intraday variability in the microwave or laser frequency into account. Moreover, we analyze the KBR-LRI residuals and discuss which error and noise contributors limit the residuals at high and low Fourier frequencies. It turns out that the agreement between KBR and LRI biased range observations can be slightly improved by considering intraday carrier frequency variations in the processing. Although the effect is probably small enough to have little relevance for gravity field determination at the current precision level, the analysis is of relevance for detailed instrument characterization and potentially for future more precise missions. △ Less

Submitted 18 May, 2022; originally announced May 2022.

Modeling of ultrafast X-ray induced magnetization dynamics in magnetic multilayer systems

Authors: K. J. Kapcia, V. Tkachenko, F. Capotondi, A. Lichtenstein, S. Molodtsov, L. Mueller, A. Philippi-Kobs, P. Piekarz, B. Ziaja

Abstract: In this work, we report on modelling results obtained with our recently developed simulation tool enabling nanoscopic description of electronic processes in X-ray irradiated ferromagnetic materials. With this tool, we have studied the response of Co/Pt multilayer system irradiated by an ultrafast extreme ultraviolet pulse at the M-edge of Co (photon energy $\sim$ 60 eV). It was previously investig… ▽ More In this work, we report on modelling results obtained with our recently developed simulation tool enabling nanoscopic description of electronic processes in X-ray irradiated ferromagnetic materials. With this tool, we have studied the response of Co/Pt multilayer system irradiated by an ultrafast extreme ultraviolet pulse at the M-edge of Co (photon energy $\sim$ 60 eV). It was previously investigated experimentally at the FERMI free-electron-laser facility, using the magnetic small-angle X-ray scattering technique. Our simulations show that the magnetic scattering signal from cobalt decreases on femtosecond timescales due to electronic excitation, relaxation and transport processes both in the cobalt and in the platinum layers, following the trend observed in the experimental data. The confirmation of the predominant role of electronic processes for X-ray induced demagnetization in the regime below the structural damage threshold is a step towards quantitative control and manipulation of X-ray induced magnetic processes on femtosecond timescales. △ Less

Submitted 5 October, 2022; v1 submitted 28 February, 2022; originally announced February 2022.

Comments: 18 pages, 7 figures; minor changes. This is the author created version of an article accepted for publication in npj Computational Materials journal. The article has been published on a gold open access basis under a CC BY 4.0 licence

Journal ref: npj Computational Materials 8, 212 (2022)

Megahertz-rate Ultrafast X-ray Scattering and Holographic Imaging at the European XFEL

Authors: Nanna Zhou Hagström, Michael Schneider, Nico Kerber, Alexander Yaroslavtsev, Erick Burgos Parra, Marijan Beg, Martin Lang, Christian M. Günther, Boris Seng, Fabian Kammerbauer, Horia Popescu, Matteo Pancaldi, Kumar Neeraj, Debanjan Polley, Rahul Jangid, Stjepan B. Hrkac, Sheena K. K. Patel, Sergei Ovcharenko, Diego Turenne, Dmitriy Ksenzov, Christine Boeglin, Igor Pronin, Marina Baidakova, Clemens von Korff Schmising, Martin Borchert , et al. (75 additional authors not shown)

Abstract: The advent of X-ray free-electron lasers (XFELs) has revolutionized fundamental science, from atomic to condensed matter physics, from chemistry to biology, giving researchers access to X-rays with unprecedented brightness, coherence, and pulse duration. All XFEL facilities built until recently provided X-ray pulses at a relatively low repetition rate, with limited data statistics. Here, we presen… ▽ More The advent of X-ray free-electron lasers (XFELs) has revolutionized fundamental science, from atomic to condensed matter physics, from chemistry to biology, giving researchers access to X-rays with unprecedented brightness, coherence, and pulse duration. All XFEL facilities built until recently provided X-ray pulses at a relatively low repetition rate, with limited data statistics. Here, we present the results from the first megahertz repetition rate X-ray scattering experiments at the Spectroscopy and Coherent Scattering (SCS) instrument of the European XFEL. We illustrate the experimental capabilities that the SCS instrument offers, resulting from the operation at MHz repetition rates and the availability of the novel DSSC 2D imaging detector. Time-resolved magnetic X-ray scattering and holographic imaging experiments in solid state samples were chosen as representative, providing an ideal test-bed for operation at megahertz rates. Our results are relevant and applicable to any other non-destructive XFEL experiments in the soft X-ray range. △ Less

Submitted 20 January, 2022; v1 submitted 17 January, 2022; originally announced January 2022.

Comments: 13 pages, 5 figures. Supplementary Information as ancillary file

Journal ref: J. Synchrotron Rad. (2022), 29

On the field strength dependence of bi- and triexponential intravoxel incoherent motion (IVIM) parameters in the liver

Authors: Andreas Julian Riexinger, Jan Martin, Susanne Rauh, Andreas Wetscherek, Mona Pistel, Tristan Anselm Kuder, Armin Michael Nagel, Michael Uder, Bernhard Hensel, Lars Müller, Frederik Bernd Laun

Abstract: Background: Studies on intravoxel incoherent motion (IVIM) imaging are carried out with different acquisition protocols. Purpose: Investigate the dependence of IVIM parameters on the B_0field strength when using a bi- or triexponential model. Field Strength/Sequence: 20 volunteers were examined at two field strengths (1.5 and 3T). Diffusion-weighted images of the abdomen were acquired at 24 b-valu… ▽ More Background: Studies on intravoxel incoherent motion (IVIM) imaging are carried out with different acquisition protocols. Purpose: Investigate the dependence of IVIM parameters on the B_0field strength when using a bi- or triexponential model. Field Strength/Sequence: 20 volunteers were examined at two field strengths (1.5 and 3T). Diffusion-weighted images of the abdomen were acquired at 24 b-values ranging from 0.2 to 500 s/mm2. Assessment: ROIs were manually drawn in the liver. Data were fitted with a bi- and a triexponential IVIM model. Resulting parameters were compared between both field strengths. Results: At b-values below 6s/mm2, the triexponential model provided better agreement with the data than the biexponential model. The average tissue diffusivity was D=1.22/1.00 um/ms at 1.5/3T. The average pseudo-diffusion coefficients for the biexponential model were D*=308/260um/ms at 1.5/3T; and for the triexponential model D1*=81.3/65.9um/ms , D2*=2453/2333um/ms at 1.5/3T. The average perfusion fractions for the biexponential model were f=0.286/0.303 at 1.5/3T; and for the triexponential model f1=0.161/0.174 and f2=0.152/0.159 at 1.5/3T. A significant B0 dependence was only found for the biexponential pseudo-diffusion coefficient (ANOVA/KW p=0.037/0.0453) and tissue diffusivity (ANOVA/KW: p<0.001). Conclusion: Our experimental results suggest that triexponential pseudo-diffusion coefficients and perfusion fractions obtained at different field strengths could be compared across different studies using different B0. However, it is recommendable to take the field strength into account when comparing tissue diffusivities or using the biexponential IVIM model. Considering published values for oxygenation-dependent transversal relaxation times of blood, it is unlikely that the two blood compartments of the triexponential model represent venous and arterial blood. △ Less

Submitted 4 May, 2021; originally announced May 2021.

Journal ref: J Magn Reson Imaging. 2019;50:1883-1892

Eddy current compensated double diffusion encoded (DDE) MRI

Authors: Lars Mueller, Andreas Wetscherek, Tristan Anselm Kuder, Frederik Bernd Laun

Abstract: Purpose: Eddy currents might lead to image distortions in diffusion weighted echo planar imaging. A method is proposed to reduce their effects on double diffusion encoding (DDE) MRI experiments and the thereby derived microscopic fractional anisotropy (μFA) . Methods: The twice refocused spin echo scheme was adapted for DDE measurements. To assess the effect of individual diffusion encodings on th… ▽ More Purpose: Eddy currents might lead to image distortions in diffusion weighted echo planar imaging. A method is proposed to reduce their effects on double diffusion encoding (DDE) MRI experiments and the thereby derived microscopic fractional anisotropy (μFA) . Methods: The twice refocused spin echo scheme was adapted for DDE measurements. To assess the effect of individual diffusion encodings on the image distortions, measurements of a grid of plastic rods in water were performed. The effect of eddy current compensation on μFA measurements was evaluated in the brains of six healthy volunteers. Results: The use of an eddy current compensation reduced the signal variation. As expected, the distortions caused by the second encoding were larger than those of the first encoding entailing a stronger need to compensate for them. For an optimal result, however, both encodings had to be compensated. The artifact reduction strongly improved the measurement of the μFA in ventricles and grey matter by reducing the overestimation. An effect of the compensation on absolute μFA values in white matter was not observed. Conclusion: It is advisable to compensate both encodings in DDE measurements for eddy currents. △ Less

Submitted 18 April, 2021; originally announced April 2021.

Comments: 23 pages, 4 figures, 1 table, 2 supplemental figures

Journal ref: Magnetic Resonance for Medicine 77: 328-335 (2017)

aDWI-BIDS: an extension to the brain imaging data structure for advanced diffusion weighted imaging

Authors: James Gholam, Filip Szczepankiewicz, Chantal M. W. Tax, Lars Mueller, Emre Kopanoglu, Markus Nilsson, Santiago Aja-Fernandez, Matt Griffin, Derek K. Jones, Leandro Beltrachini

Abstract: Diffusion weighted imaging techniques permit us to infer microstructural detail in biological tissue in vivo and noninvasively. Modern sequences are based on advanced diffusion encoding schemes, allowing probing of more revealing measures of tissue microstructure than the standard apparent diffusion coefficient or fractional anisotropy. Though these methods may result in faster or more revealing a… ▽ More Diffusion weighted imaging techniques permit us to infer microstructural detail in biological tissue in vivo and noninvasively. Modern sequences are based on advanced diffusion encoding schemes, allowing probing of more revealing measures of tissue microstructure than the standard apparent diffusion coefficient or fractional anisotropy. Though these methods may result in faster or more revealing acquisitions, they generally demand prior knowledge of sequence-specific parameters for which there is no accepted sharing standard. Here, we present a metadata labelling scheme suitable for the needs of developers and users within the diffusion neuroimaging community alike: a lightweight, unambiguous parametric map relaying acqusition parameters. This extensible scheme supports a wide spectrum of diffusion encoding methods, from single diffusion encoding to highly complex sequences involving arbitrary gradient waveforms. Built under the brain imaging data structure (BIDS), it allows storage of advanced diffusion MRI data comprehensively alongside any other neuroimaging information, facilitating processing pipelines and multimodal analyses. We illustrate the usefulness of this BIDS-extension with a range of example data, and discuss the extension's impact on pre- and post-processing software. △ Less

Submitted 12 April, 2021; v1 submitted 26 March, 2021; originally announced March 2021.

Design, upgrade and characterization of the silicon photomultiplier front-end for the AMIGA detector at the Pierre Auger Observatory

Authors: The Pierre Auger Collaboration, A. Aab, P. Abreu, M. Aglietta, J. M. Albury, I. Allekotte, A. Almela, J. Alvarez-Muñiz, R. Alves Batista, G. A. Anastasi, L. Anchordoqui, B. Andrada, S. Andringa, C. Aramo, P. R. Araújo Ferreira, H. Asorey, P. Assis, G. Avila, A. M. Badescu, A. Bakalova, A. Balaceanu, F. Barbato, R. J. Barreira Luz, K. H. Becker, J. A. Bellido , et al. (335 additional authors not shown)

Abstract: AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to complement the study of ultra-high-energy cosmic rays (UHECR) by measuring the muon content of extensive air showers (EAS). It consists of an array of 61 water Cherenkov detectors on a denser spacing in combination with underground scintillation detectors used for muon density measurement. Each det… ▽ More AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to complement the study of ultra-high-energy cosmic rays (UHECR) by measuring the muon content of extensive air showers (EAS). It consists of an array of 61 water Cherenkov detectors on a denser spacing in combination with underground scintillation detectors used for muon density measurement. Each detector is composed of three scintillation modules, with 10 m$^2$ detection area per module, buried at 2.3 m depth, resulting in a total detection area of 30 m$^2$. Silicon photomultiplier sensors (SiPM) measure the amount of scintillation light generated by charged particles traversing the modules. In this paper, the design of the front-end electronics to process the signals of those SiPMs and test results from the laboratory and from the Pierre Auger Observatory are described. Compared to our previous prototype, the new electronics shows a higher performance, higher efficiency and lower power consumption, and it has a new acquisition system with increased dynamic range that allows measurements closer to the shower core. The new acquisition system is based on the measurement of the total charge signal that the muonic component of the cosmic ray shower generates in the detector. △ Less

Submitted 25 January, 2021; v1 submitted 12 November, 2020; originally announced November 2020.

Comments: 40 pages, 33 figures

Report number: FERMILAB-PUB-20-605-AD-E-TD

Journal ref: JINST 16 (2021) P01026

Studies on the response of a water-Cherenkov detector of the Pierre Auger Observatory to atmospheric muons using an RPC hodoscope

Authors: The Pierre Auger Collaboration, A. Aab, P. Abreu, M. Aglietta, J. M. Albury, I. Allekotte, A. Almela, J. Alvarez Castillo, J. Alvarez-Muñiz, R. Alves Batista, G. A. Anastasi, L. Anchordoqui, B. Andrada, S. Andringa, C. Aramo, P. R. Araújo Ferreira, H. Asorey, P. Assis, G. Avila, A. M. Badescu, A. Bakalova, A. Balaceanu, F. Barbato, R. J. Barreira Luz, K. H. Becker , et al. (353 additional authors not shown)

Abstract: Extensive air showers, originating from ultra-high energy cosmic rays, have been successfully measured through the use of arrays of water-Cherenkov detectors (WCDs). Sophisticated analyses exploiting WCD data have made it possible to demonstrate that shower simulations, based on different hadronic-interaction models, cannot reproduce the observed number of muons at the ground. The accurate knowled… ▽ More Extensive air showers, originating from ultra-high energy cosmic rays, have been successfully measured through the use of arrays of water-Cherenkov detectors (WCDs). Sophisticated analyses exploiting WCD data have made it possible to demonstrate that shower simulations, based on different hadronic-interaction models, cannot reproduce the observed number of muons at the ground. The accurate knowledge of the WCD response to muons is paramount in establishing the exact level of this discrepancy. In this work, we report on a study of the response of a WCD of the Pierre Auger Observatory to atmospheric muons performed with a hodoscope made of resistive plate chambers (RPCs), enabling us to select and reconstruct nearly 600 thousand single muon trajectories with zenith angles ranging from 0$^\circ$ to 55$^\circ$. Comparison of distributions of key observables between the hodoscope data and the predictions of dedicated simulations allows us to demonstrate the accuracy of the latter at a level of 2%. As the WCD calibration is based on its response to atmospheric muons, the hodoscope data are also exploited to show the long-term stability of the procedure. △ Less

Submitted 9 September, 2020; v1 submitted 8 July, 2020; originally announced July 2020.

Comments: Published version, 25 pages, 9 figures

Report number: FERMILAB-PUB-20-285-PPD-TD

Journal ref: JINST 15 (2020) P09002

Stability selection enables robust learning of partial differential equations from limited noisy data

Authors: Suryanarayana Maddu, Bevan L. Cheeseman, Ivo F. Sbalzarini, Christian L. Müller

Abstract: We present a statistical learning framework for robust identification of partial differential equations from noisy spatiotemporal data. Extending previous sparse regression approaches for inferring PDE models from simulated data, we address key issues that have thus far limited the application of these methods to noisy experimental data, namely their robustness against noise and the need for manua… ▽ More We present a statistical learning framework for robust identification of partial differential equations from noisy spatiotemporal data. Extending previous sparse regression approaches for inferring PDE models from simulated data, we address key issues that have thus far limited the application of these methods to noisy experimental data, namely their robustness against noise and the need for manual parameter tuning. We address both points by proposing a stability-based model selection scheme to determine the level of regularization required for reproducible recovery of the underlying PDE. This avoids manual parameter tuning and provides a principled way to improve the method's robustness against noise in the data. Our stability selection approach, termed PDE-STRIDE, can be combined with any sparsity-promoting penalized regression model and provides an interpretable criterion for model component importance. We show that in particular the combination of stability selection with the iterative hard-thresholding algorithm from compressed sensing provides a fast, parameter-free, and robust computational framework for PDE inference that outperforms previous algorithmic approaches with respect to recovery accuracy, amount of data required, and robustness to noise. We illustrate the performance of our approach on a wide range of noise-corrupted simulated benchmark problems, including 1D Burgers, 2D vorticity-transport, and 3D reaction-diffusion problems. We demonstrate the practical applicability of our method on real-world data by considering a purely data-driven re-evaluation of the advective triggering hypothesis for an embryonic polarization system in C.~elegans. Using fluorescence microscopy images of C.~elegans zygotes as input data, our framework is able to recover the PDE model for the regulatory reaction-diffusion-flow network of the associated proteins. △ Less

Submitted 17 July, 2019; originally announced July 2019.

Comments: 20 pages, 10 figures and supplementary material included

Comparison of 1D and 3D Models for the Estimation of Fractional Flow Reserve

Authors: P. J. Blanco, C. A. Bulant, L. O. Müller, G. D. Maso Talou, C. Guedes Bezerra, P. L. Lemos, R. A. Feijóo

Abstract: In this work we propose to validate the predictive capabilities of one-dimensional (1D) blood flow models with full three-dimensional (3D) models in the context of patient-specific coronary hemodynamics in hyperemic conditions. Such conditions mimic the state of coronary circulation during the acquisition of the Fractional Flow Reserve (FFR) index. Demonstrating that 1D models accurately reproduce… ▽ More In this work we propose to validate the predictive capabilities of one-dimensional (1D) blood flow models with full three-dimensional (3D) models in the context of patient-specific coronary hemodynamics in hyperemic conditions. Such conditions mimic the state of coronary circulation during the acquisition of the Fractional Flow Reserve (FFR) index. Demonstrating that 1D models accurately reproduce FFR estimates obtained with 3D models has implications in the approach to computationally estimate FFR. To this end, a sample of 20 patients was employed from which 29 3D geometries of arterial trees were constructed, 9 obtained from coronary computed tomography angiography (CCTA) and 20 from intra-vascular ultrasound (IVUS). For each 3D arterial model, a 1D counterpart was generated. The same outflow and inlet pressure boundary conditions were applied to both (3D and 1D) models. In the 1D setting, pressure losses at stenoses and bifurcations were accounted for through specific lumped models. Comparisons between 1D models ($\text{FFR}_{\text{1D}}$) and 3D models ($\text{FFR}_{\text{3D}}$) were performed in terms of predicted $\text{FFR}$ value. Compared to $\text{FFR}_{\text{3D}}$, $\text{FFR}_{\text{1D}}$ resulted with a difference of 0.00$\pm$0.03 and overall predictive capability AUC, Acc, Spe, Sen, PPV and NPV of 0.97, 0.98, 0.90, 0.99, 0.82, and 0.99, with an FFR threshold of 0.8. We conclude that inexpensive $\text{FFR}_{\text{1D}}$ simulations can be reliably used as a surrogate of demanding $\text{FFR}_{\text{3D}}$ computations. △ Less

Submitted 29 May, 2018; originally announced May 2018.

Comments: 11 pages, 2 figures, 2 tables, submited to Scientific Reports

Photophysics of indole upon x-ray absorption

Authors: Thomas Kierspel, Cédric Bomme, Michele Di Fraia, Joss Wiese, Denis Anielski, Sadia Bari, Rebecca Boll, Benjamin Erk, Jens S. Kienitz, Nele L. M. Müller, Daniel Rolles, Jens Viefhaus, Sebastian Trippel, Jochen Küpper

Abstract: A photofragmentation study of gas-phase indole (C$_8$H$_7$N) upon single-photon ionization at a photon energy of 420 eV is presented. Indole was primarily inner-shell ionized at its nitrogen and carbon $1s$ orbitals. Electrons and ions were measured in coincidence by means of velocity map imaging. The angular relationship between ionic fragments is discussed along with the possibility to use the a… ▽ More A photofragmentation study of gas-phase indole (C$_8$H$_7$N) upon single-photon ionization at a photon energy of 420 eV is presented. Indole was primarily inner-shell ionized at its nitrogen and carbon $1s$ orbitals. Electrons and ions were measured in coincidence by means of velocity map imaging. The angular relationship between ionic fragments is discussed along with the possibility to use the angle-resolved coincidence detection to perform experiments on molecules that are strongly oriented in their recoil-frame. The coincident measurement of electrons and ions revealed fragmentation-pathway-dependent electron spectra, linking the structural fragmentation dynamics to different electronic excitations. Evidence for photoelectron-impact self-ionization was observed. △ Less

Submitted 19 July, 2018; v1 submitted 8 February, 2018; originally announced February 2018.

Comments: 11 pages, 6 figures

Journal ref: Physical Chemistry Chemical Physics, 2018, 20, 20205 - 20216

Construction of KAGRA: an Underground Gravitational Wave Observatory

Authors: T. Akutsu, M. Ando, S. Araki, A. Araya, T. Arima, N. Aritomi, H. Asada, Y. Aso, S. Atsuta, K. Awai, L. Baiotti, M. A. Barton, D. Chen, K. Cho, K. Craig, R. DeSalvo, K. Doi, K. Eda, Y. Enomoto, R. Flaminio, S. Fujibayashi, Y. Fujii, M. -K. Fujimoto, M. Fukushima, T. Furuhata , et al. (202 additional authors not shown)

Abstract: Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferomet… ▽ More Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferometer operation has been installed and the first test run was accomplished in March and April of 2016 with a rather simple configuration. The initial configuration of KAGRA is named {\it iKAGRA}. In this paper, we summarize the construction of KAGRA, including the study of the advantages and challenges of building an underground detector and the operation of the iKAGRA interferometer together with the geophysics interferometer that has been constructed in the same tunnel. △ Less

Submitted 11 December, 2017; v1 submitted 30 November, 2017; originally announced December 2017.

Comments: Resolution of some figures has been decreased from its original version submitted to a journal

Journal ref: Progress of Theoretical and Experimental Physics, Vol 2018, 1, 013F01

Spectral Calibration of the Fluorescence Telescopes of the Pierre Auger Observatory

Authors: The Pierre Auger Collaboration, A. Aab, P. Abreu, M. Aglietta, I. Al Samarai, I. F. M. Albuquerque, I. Allekotte, A. Almela, J. Alvarez Castillo, J. Alvarez-Muñiz, G. A. Anastasi, L. Anchordoqui, B. Andrada, S. Andringa, C. Aramo, F. Arqueros, N. Arsene, H. Asorey, P. Assis, J. Aublin, G. Avila, A. M. Badescu, A. Balaceanu, F. Barbato, R. J. Barreira Luz , et al. (381 additional authors not shown)

Abstract: We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator.… ▽ More We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator. Different sets of telescopes in the observatory have different optical components, and the eight telescopes measured represent two each of the four combinations of components represented in the observatory. We made an end-to-end measurement of the response from different combinations of optical components, and the monochromator setup allowed for more precise and complete measurements than our previous multi-wavelength calibrations. We find an overall uncertainty in the calibration of the spectral response of most of the telescopes of 1.5% for all wavelengths; the six oldest telescopes have larger overall uncertainties of about 2.2%. We also report changes in physics measureables due to the change in calibration, which are generally small. △ Less

Submitted 2 October, 2017; v1 submitted 5 September, 2017; originally announced September 2017.

Comments: Published version. Added journal reference and DOI. Added Report Number

Report number: FERMILAB-PUB-17-355

Journal ref: Astroparticle Physics 95 (2017) 44-56

Small optic suspensions for Advanced LIGO input optics and other precision optical experiments

Authors: G. Ciani, M. A. Arain, S. M. Aston, D. Feldbaum, P. Fulda, J. Gleason, M. Heintze, R. M. Martin, C. L. Mueller, D. M. Nanda Kumar, A. Pele, D. H. Reitze, P. Sainathan, D. B. Tanner, L. F. Williams, G. Mueller

Abstract: We report on the design and performance of small optic suspensions developed to suppress seismic motion of out-of-cavity optics in the Input Optics subsystem of the Advanced LIGO interferometric gravitational wave detector. These compact single stage suspensions provide isolation in all six degrees of freedom of the optic, local sensing and actuation in three of them, and passive damping for the o… ▽ More We report on the design and performance of small optic suspensions developed to suppress seismic motion of out-of-cavity optics in the Input Optics subsystem of the Advanced LIGO interferometric gravitational wave detector. These compact single stage suspensions provide isolation in all six degrees of freedom of the optic, local sensing and actuation in three of them, and passive damping for the other three. △ Less

Submitted 29 June, 2016; originally announced June 2016.

Report number: LIGO-P1600178

The Sensitivity of the Advanced LIGO Detectors at the Beginning of Gravitational Wave Astronomy

Authors: D. V. Martynov, E. D. Hall, B. P. Abbott, R. Abbott, T. D. Abbott, C. Adams, R. X. Adhikari, R. A. Anderson, S. B. Anderson, K. Arai, M. A. Arain, S. M. Aston, L. Austin, S. W. Ballmer, M. Barbet, D. Barker, B. Barr, L. Barsotti, J. Bartlett, M. A. Barton, I. Bartos, J. C. Batch, A. S. Bell, I. Belopolski, J. Bergman , et al. (239 additional authors not shown)

Abstract: The Laser Interferometer Gravitational Wave Observatory (LIGO) consists of two widely separated 4 km laser interferometers designed to detect gravitational waves from distant astrophysical sources in the frequency range from 10 Hz to 10 kHz. The first observation run of the Advanced LIGO detectors started in September 2015 and ended in January 2016. A strain sensitivity of better than… ▽ More The Laser Interferometer Gravitational Wave Observatory (LIGO) consists of two widely separated 4 km laser interferometers designed to detect gravitational waves from distant astrophysical sources in the frequency range from 10 Hz to 10 kHz. The first observation run of the Advanced LIGO detectors started in September 2015 and ended in January 2016. A strain sensitivity of better than $10^{-23}/\sqrt{\text{Hz}}$ was achieved around 100 Hz. Understanding both the fundamental and the technical noise sources was critical for increasing the observable volume in the universe. The average distance at which coalescing binary black hole systems with individual masses of 30 $M_\odot$ could be detected was 1.3 Gpc. Similarly, the range for binary neutron star inspirals was about 75 Mpc. With respect to the initial detectors, the observable volume of Universe increased respectively by a factor 69 and 43. These improvements allowed Advanced LIGO to detect the gravitational wave signal from the binary black hole coalescence, known as GW150914. △ Less

Submitted 10 February, 2018; v1 submitted 1 April, 2016; originally announced April 2016.

Journal ref: Phys. Rev. D 93, 112004 (2016)

Calibration of the Advanced LIGO detectors for the discovery of the binary black-hole merger GW150914

Authors: The LIGO Scientific Collaboration, B. P. Abbott, R. Abbott, T. D. Abbott, M. R. Abernathy, K. Ackley, C. Adams, P. Addesso, R. X. Adhikari, V. B. Adya, C. Affeldt, N. Aggarwal, O. D. Aguiar, A. Ain, P. Ajith, B. Allen, P. A. Altin, D. V. Amariutei, S. B. Anderson, W. G. Anderson, K. Arai, M. C. Araya, C. C. Arceneaux, J. S. Areeda, K. G. Arun , et al. (702 additional authors not shown)

Abstract: In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detec… ▽ More In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detector's gravitational-wave response. The gravitational-wave response model is determined by the detector's opto-mechanical response and the properties of its feedback control system. The measurements used to validate the model and characterize its uncertainty are derived primarily from a dedicated photon radiation pressure actuator, with cross-checks provided by optical and radio frequency references. We describe how the gravitational-wave readout signal is calibrated into equivalent gravitational-wave-induced strain and how the statistical uncertainties and systematic errors are assessed. Detector data collected over 38 calendar days, from September 12 to October 20, 2015, contain the event GW150914 and approximately 16 of coincident data used to estimate the event false alarm probability. The calibration uncertainty is less than 10% in magnitude and 10 degrees in phase across the relevant frequency band 20 Hz to 1 kHz. △ Less

Submitted 28 February, 2017; v1 submitted 11 February, 2016; originally announced February 2016.

Comments: 15 pages, 10 figures

Journal ref: Phys. Rev. D 95, 062003 (2017)

Electron gun for diffraction experiments off controlled molecules

Authors: Nele L. M. Müller, Sebastian Trippel, Karol Długołecki, Jochen Küpper

Abstract: A dc electron gun, generating picosecond pulses with up to $8\times10^{6}$ electrons per pulse, was developed. Its applicability for future time-resolved-diffraction experiments on state- and conformer-selected laser-aligned or oriented gaseous samples was characterized. The focusing electrodes were arranged in a velocity-map imaging spectrometer configuration. This allowed to directly measure the… ▽ More A dc electron gun, generating picosecond pulses with up to $8\times10^{6}$ electrons per pulse, was developed. Its applicability for future time-resolved-diffraction experiments on state- and conformer-selected laser-aligned or oriented gaseous samples was characterized. The focusing electrodes were arranged in a velocity-map imaging spectrometer configuration. This allowed to directly measure the spatial and velocity distributions of the electron pulses emitted from the cathode. The coherence length and pulse duration of the electron beam were characterized by these measurements combined with electron trajectory simulations. Electron diffraction data off a thin aluminum foil illustrated the coherence and resolution of the electron-gun setup. △ Less

Submitted 25 September, 2015; v1 submitted 9 July, 2015; originally announced July 2015.

Journal ref: J. Phys. B: At. Mol. Opt. Phys. 48 (2015) 244001

In-situ characterization of the thermal state of resonant optical interferometers via tracking of their higher-order mode resonances

Authors: Chris L. Mueller, Paul Fulda, Rana X. Adhikari, Koji Arai, Aidan F. Brooks, Rijuparna Chakraborty, Valery V. Frolov, Peter Fritschel, Eleanor J. King, David B. Tanner, Hiroaki Yamamoto, Guido Mueller

Abstract: Thermal lensing in resonant optical interferometers such as those used for gravitational wave detection is a concern due to the negative impact on control signals and instrument sensitivity. In this paper we describe a method for monitoring the thermal state of such interferometers by probing the higher-order spatial mode resonances of the cavities within them. We demonstrate the use of this techn… ▽ More Thermal lensing in resonant optical interferometers such as those used for gravitational wave detection is a concern due to the negative impact on control signals and instrument sensitivity. In this paper we describe a method for monitoring the thermal state of such interferometers by probing the higher-order spatial mode resonances of the cavities within them. We demonstrate the use of this technique to measure changes in the Advanced LIGO input mode cleaner cavity geometry as a function of input power, and subsequently infer the optical absorption at the mirror surfaces at the level of 1 ppm per mirror. We also demonstrate the generation of a useful error signal for thermal state of the Advanced LIGO power recycling cavity by continuously tracking the first order spatial mode resonance frequency. Such an error signal could be used as an input to thermal compensation systems to maintain the interferometer cavity geometries in the presence of transients in circulating light power levels, thereby maintaining optimal sensitivity and maximizing the duty-cycle of the detectors. △ Less

Submitted 8 February, 2015; originally announced February 2015.

Two-state wave packet for strong field-free molecular orientation

Authors: Sebastian Trippel, Terry Mullins, Nele L. M. Müller, Jens S. Kienitz, Rosario González-Férez, Jochen Küpper

Abstract: We demonstrate strong laser-field-free orientation of absolute-ground-state carbonyl sulfide molecules. The molecules are oriented by the combination of a 485-ps-long non-resonant laser pulse and a weak static electric field. The edges of the laser pulse create a coherent superposition of two rotational states resulting in revivals of strong transient molecular orientation after the laser pulse. T… ▽ More We demonstrate strong laser-field-free orientation of absolute-ground-state carbonyl sulfide molecules. The molecules are oriented by the combination of a 485-ps-long non-resonant laser pulse and a weak static electric field. The edges of the laser pulse create a coherent superposition of two rotational states resulting in revivals of strong transient molecular orientation after the laser pulse. The experimentally attained degree of orientation of 0.6 corresponds to the theoretical maximum for mixing of the two states. Switching off the dc field would provide the same orientation completely field-free. △ Less

Submitted 25 January, 2015; v1 submitted 9 September, 2014; originally announced September 2014.

Journal ref: Phys. Rev. Lett. 114 (2015) 103003

Imaging Molecular Structure through Femtosecond Photoelectron Diffraction on Aligned and Oriented Gas-Phase Molecules

Authors: R. Boll, A. Rouzee, M. Adolph, D. Anielski, A. Aquila, S. Bari, C. Bomme, C. Bostedt, J. D. Bozek, H. N. Chapman, L. Christensen, R. Coffee, N. Coppola, S. De, P. Decleva, S. W. Epp, B. Erk, F. Filsinger, L. Foucar, T. Gorkhover, L. Gumprecht, A. Hoemke, L. Holmegaard, P. Johnsson, J. S. Kienitz , et al. (27 additional authors not shown)

Abstract: This paper gives an account of our progress towards performing femtosecond time-resolved photoelectron diffraction on gas-phase molecules in a pump-probe setup combining optical lasers and an X-ray Free-Electron Laser. We present results of two experiments aimed at measuring photoelectron angular distributions of laser-aligned 1-ethynyl-4-fluorobenzene (C8H5F) and dissociating, laseraligned 1,4-di… ▽ More This paper gives an account of our progress towards performing femtosecond time-resolved photoelectron diffraction on gas-phase molecules in a pump-probe setup combining optical lasers and an X-ray Free-Electron Laser. We present results of two experiments aimed at measuring photoelectron angular distributions of laser-aligned 1-ethynyl-4-fluorobenzene (C8H5F) and dissociating, laseraligned 1,4-dibromobenzene (C6H4Br2) molecules and discuss them in the larger context of photoelectron diffraction on gas-phase molecules. We also show how the strong nanosecond laser pulse used for adiabatically laser-aligning the molecules influences the measured electron and ion spectra and angular distributions, and discuss how this may affect the outcome of future time-resolved photoelectron diffraction experiments. △ Less

Submitted 29 July, 2014; originally announced July 2014.

Comments: 24 pages, 10 figures, Faraday Discussions 171

Strongly driven quantum pendulum of the OCS molecule

Authors: S. Trippel, T. Mullins, N. L. M. Müller, J. S. Kienitz, J. J. Omiste, H. Stapelfeldt, R. González-Férez, J. Küpper

Abstract: We demonstrate and analyze a strongly driven quantum pendulum in the angular motion of stateselected and laser aligned OCS molecules. Raman-couplings during the rising edge of a 50-picosecond laser pulse create a wave packet of pendular states, which propagates in the confining potential formed by the polarizability interaction between the molecule and the laser field. This wave-packet dynamics ma… ▽ More We demonstrate and analyze a strongly driven quantum pendulum in the angular motion of stateselected and laser aligned OCS molecules. Raman-couplings during the rising edge of a 50-picosecond laser pulse create a wave packet of pendular states, which propagates in the confining potential formed by the polarizability interaction between the molecule and the laser field. This wave-packet dynamics manifests itself as pronounced oscillations in the degree of alignment with a laser-intensity dependent period. △ Less

Submitted 27 January, 2014; originally announced January 2014.

Comments: 6 pages, 4 figures

Journal ref: Phys. Rev. A 89, 051401 (2014)

Aspects of randomness in neural graph structures

Authors: Michelle Rudolph-Lilith, Lyle E. Muller

Abstract: In the past two decades, significant advances have been made in understanding the structural and functional properties of biological networks, via graph-theoretic analysis. In general, most graph-theoretic studies are conducted in the presence of serious uncertainties, such as major undersampling of the experimental data. In the specific case of neural systems, however, a few moderately robust exp… ▽ More In the past two decades, significant advances have been made in understanding the structural and functional properties of biological networks, via graph-theoretic analysis. In general, most graph-theoretic studies are conducted in the presence of serious uncertainties, such as major undersampling of the experimental data. In the specific case of neural systems, however, a few moderately robust experimental reconstructions do exist, and these have long served as fundamental prototypes for studying connectivity patterns in the nervous system. In this paper, we provide a comparative analysis of these "historical" graphs, both in (unmodified) directed and (often symmetrized) undirected forms, and focus on simple structural characterizations of their connectivity. We find that in most measures the networks studied are captured by simple random graph models; in a few key measures, however, we observe a marked departure from the random graph prediction. Our results suggest that the mechanism of graph formation in the networks studied is not well-captured by existing abstract graph models, such as the small-world or scale-free graph. △ Less

Submitted 18 October, 2013; originally announced October 2013.

Comments: 19 pages, 7 figures

An experimental approach for investigating many-body phenomena in Rydberg-interacting quantum systems

Authors: C. S. Hofmann, G. Günter, H. Schempp, N. L. M. Müller, A. Faber, H. Busche, M. Robert-de-Saint-Vincent, S. Whitlock, M. Weidemüller

Abstract: Recent developments in the study of ultracold Rydberg gases demand an advanced level of experimental sophistication, in which high atomic and optical densities must be combined with excellent control of external fields and sensitive Rydberg atom detection. We describe a tailored experimental system used to produce and study Rydberg-interacting atoms excited from dense ultracold atomic gases. The e… ▽ More Recent developments in the study of ultracold Rydberg gases demand an advanced level of experimental sophistication, in which high atomic and optical densities must be combined with excellent control of external fields and sensitive Rydberg atom detection. We describe a tailored experimental system used to produce and study Rydberg-interacting atoms excited from dense ultracold atomic gases. The experiment has been optimized for fast duty cycles using a high flux cold atom source and a three beam optical dipole trap. The latter enables tuning of the atomic density and temperature over several orders of magnitude, all the way to the Bose-Einstein condensation transition. An electrode structure surrounding the atoms allows for precise control over electric fields and single-particle sensitive field ionization detection of Rydberg atoms. We review two experiments which highlight the influence of strong Rydberg--Rydberg interactions on different many-body systems. First, the Rydberg blockade effect is used to pre-structure an atomic gas prior to its spontaneous evolution into an ultracold plasma. Second, hybrid states of photons and atoms called dark-state polaritons are studied. By looking at the statistical distribution of Rydberg excited atoms we reveal correlations between dark-state polaritons. These experiments will ultimately provide a deeper understanding of many-body phenomena in strongly-interacting regimes, including the study of strongly-coupled plasmas and interfaces between atoms and light at the quantum level. △ Less

Submitted 3 July, 2013; originally announced July 2013.

Comments: 14 pages, 11 figures; submitted to a special issue of 'Frontiers of Physics' dedicated to 'Quantum Foundation and Technology: Frontiers and Future'

Strongly aligned and oriented molecular samples at a kHz repetition rate

Authors: Sebastian Trippel, Terry Mullins, Nele L. M. Müller, Jens S. Kienitz, Karol Długołecki, Jochen Küpper

Abstract: We demonstrate strong adiabatic laser alignment and mixed-field orientation at kHz repetition rates. We observe degrees of alignment as large as cosΘ=0.94 at 1 kHz operation for iodobenzene. The experimental setup consist of a kHz laser system simultaneously producing pulses of 30 fs (1.3 mJ) and 450 ps (9 mJ). A cold 1 K state-selected molecular beam is produced at the same rate by appropriate op… ▽ More We demonstrate strong adiabatic laser alignment and mixed-field orientation at kHz repetition rates. We observe degrees of alignment as large as cosΘ=0.94 at 1 kHz operation for iodobenzene. The experimental setup consist of a kHz laser system simultaneously producing pulses of 30 fs (1.3 mJ) and 450 ps (9 mJ). A cold 1 K state-selected molecular beam is produced at the same rate by appropriate operation of an Even-Lavie valve. Quantum state selection has been obtained using an electrostatic deflector. A camera and data acquisition system records and analyzes the images on a single-shot basis. The system is capable of producing, controlling (translation and rotation) and analyzing cold molecular beams at kHz repetition rates and is, therefore, ideally suited for the recording of ultrafast dynamics in so-called "molecular movies". △ Less

Submitted 23 May, 2013; v1 submitted 9 January, 2013; originally announced January 2013.

Comments: 6 pages, 4 figures, in press in Mol. Phys., accepted in February 2013, in final production (galley proofs done) since March 8, 2013, v3 only adds publication data

Journal ref: Mol. Phys. 111, 1738-1743 (2013)

Structual Vulnerability of the Nematode Worm Neural Graph

Authors: Michelle Rudolph-Lilith, Alain Destexhe, Lyle E. Muller

Abstract: The number of connected components and the size of the largest connected component are studied under node and edge removal in the connectivity graph of the C. elegans nervous system. By studying the two subgraphs - the directed graph of chemical synapses and the undirected graph of electrical junctions - we observe that adding a small number of undirected edges dramatically reduces the number of c… ▽ More The number of connected components and the size of the largest connected component are studied under node and edge removal in the connectivity graph of the C. elegans nervous system. By studying the two subgraphs - the directed graph of chemical synapses and the undirected graph of electrical junctions - we observe that adding a small number of undirected edges dramatically reduces the number of components in the complete graph. Under random node and edge removal, the C. elegans graph displays a remarkable structural robustness. We then compare these results with the vulnerability of a number of canonical graph models. △ Less

Submitted 16 August, 2012; originally announced August 2012.

Comments: 4 pages, 4 figures