Showing 1–50 of 109 results for author: Mueller, E

Machine Learning for Single-Ended Event Reconstruction in PROSPECT Experiment

Authors: M. Andriamirado, A. B. Balantekin, C. D. Bass, O. Benevides Rodrigues, E. P. Bernard, N. S. Bowden, C. D. Bryan, R. Carr, T. Classen, A. J. Conant, G. Deichert, A. Delgado, M. J. Dolinski, A. Erickson, M. Fuller, A. Galindo-Uribarri, S. Gokhale, C. Grant, S. Hans, A. B. Hansell, T. E. Haugen, K. M. Heeger, B. Heffron, D. E. Jaffe, S. Jayakumar , et al. (21 additional authors not shown)

Abstract: The Precision Reactor Oscillation and Spectrum Experiment, PROSPECT, was a segmented antineutrino detector that successfully operated at the High Flux Isotope Reactor in Oak Ridge, TN, during its 2018 run. Despite challenges with photomultiplier tube base failures affecting some segments, innovative machine learning approaches were employed to perform position and energy reconstruction, and partic… ▽ More The Precision Reactor Oscillation and Spectrum Experiment, PROSPECT, was a segmented antineutrino detector that successfully operated at the High Flux Isotope Reactor in Oak Ridge, TN, during its 2018 run. Despite challenges with photomultiplier tube base failures affecting some segments, innovative machine learning approaches were employed to perform position and energy reconstruction, and particle classification. This work highlights the effectiveness of convolutional neural networks and graph convolutional networks in enhancing data analysis. By leveraging these techniques, a 3.3% increase in effective statistics was achieved compared to traditional methods, showcasing their potential to improve analysis performance. Furthermore, these machine learning methodologies offer promising applications for other segmented particle detectors, underscoring their versatility and impact. △ Less

Submitted 30 May, 2025; v1 submitted 9 March, 2025; originally announced March 2025.

Comments: 28 pages, 9 figures

Scintillation Light Detection in Polycrystalline Diamond Using Single Photon Detectors

Authors: Niccolò Gallice, Aleksey Bolotnikov, Erik M. Muller, Thomas Tsang

Abstract: This study investigates the scintillation properties of polycrystalline diamond for particle detection applications, particularly in neutron and alpha radiation environments. Polycrystalline diamonds provide a cost-effective alternative to monocrystalline diamonds while retaining essential detection properties. Photoluminescence measurements were performed to analyze emission spectra, revealing di… ▽ More This study investigates the scintillation properties of polycrystalline diamond for particle detection applications, particularly in neutron and alpha radiation environments. Polycrystalline diamonds provide a cost-effective alternative to monocrystalline diamonds while retaining essential detection properties. Photoluminescence measurements were performed to analyze emission spectra, revealing distinct characteristics based on impurity content and crystallinity. Scintillation responses were assessed using Silicon Photomultipliers (SiPMs), demonstrating the capability of polycrystalline diamond powders to respond to alpha irradiation, albeit with reduced resolution compared to traditional scintillators. A prototype neutron detector was developed by combining diamond powder with neutron-sensitive ${}^6$LiF, and its performance was evaluated through experimental testing and Geant4 simulations. The findings indicate that polycrystalline diamond-based detectors can achieve significant detection efficiency while remaining insensitive to gamma radiation, offering potential for portable neutron detection applications. △ Less

Submitted 13 February, 2025; originally announced February 2025.

A Higher-order Hybridisable Discontinuous Galerkin IMEX method for the incompressible Euler equations

Authors: Eike Hermann Müller

Abstract: The incompressible Euler equations are an important model system in computational fluid dynamics. Fast high-order methods for the solution of this time-dependent system of partial differential equations are of particular interest: due to their exponential convergence in the polynomial degree they can make efficient use of computational resources. To address this challenge we describe a novel times… ▽ More The incompressible Euler equations are an important model system in computational fluid dynamics. Fast high-order methods for the solution of this time-dependent system of partial differential equations are of particular interest: due to their exponential convergence in the polynomial degree they can make efficient use of computational resources. To address this challenge we describe a novel timestepping method which combines a hybridised Discontinuous Galerkin method for the spatial discretisation with IMEX timestepping schemes, thus achieving high-order accuracy in both space and time. The computational bottleneck is the solution of a (block-) sparse linear system to compute updates to pressure and velocity at each stage of the IMEX integrator. Following Chorin's projection approach, this update of the velocity and pressure fields is split into two stages. As a result, the hybridised equation for the implicit pressure-velocity problem is reduced to the well-known system which arises in hybridised mixed formulations of the Poisson- or diffusion problem and for which efficient multigrid preconditioners have been developed. Splitting errors can be reduced systematically by embedding this update into a preconditioned Richardson iteration. The accuracy and efficiency of the new method is demonstrated numerically for two time-dependent testcases that have been previously studied in the literature. △ Less

Submitted 13 October, 2024; originally announced October 2024.

Comments: 28 pages, 11 figures, 8 tables

MSC Class: 35J55; 35L65; 35Q35; 65L06; 65M55; 65M60; 65N30; 65N55 ACM Class: G.1.3; G.1.8

Spatial structure facilitates evolutionary rescue by drug resistance

Authors: Cecilia Fruet, Ella Linxia Müller, Claude Loverdo, Anne-Florence Bitbol

Abstract: Bacterial populations often have complex spatial structures, which can impact their evolution. Here, we study how spatial structure affects the evolution of antibiotic resistance in a bacterial population. We consider a minimal model of spatially structured populations where all demes (i.e., subpopulations) are identical and connected to each other by identical migration rates. We show that spatia… ▽ More Bacterial populations often have complex spatial structures, which can impact their evolution. Here, we study how spatial structure affects the evolution of antibiotic resistance in a bacterial population. We consider a minimal model of spatially structured populations where all demes (i.e., subpopulations) are identical and connected to each other by identical migration rates. We show that spatial structure can facilitate the survival of a bacterial population to antibiotic treatment, starting from a sensitive inoculum. Specifically, the bacterial population can be rescued if antibiotic resistant mutants appear and are present when drug is added, and spatial structure can impact the fate of these mutants and the probability that they are present. Indeed, the probability of fixation of neutral or deleterious mutations providing drug resistance is increased in smaller populations. This promotes local fixation of resistant mutants in the structured population, which facilitates evolutionary rescue by drug resistance in the rare mutation regime. Once the population is rescued by resistance, migrations allow resistant mutants to spread in all demes. Our main result that spatial structure facilitates evolutionary rescue by antibiotic resistance extends to more complex spatial structures, and to the case where there are resistant mutants in the inoculum. △ Less

Submitted 20 December, 2024; v1 submitted 11 September, 2024; originally announced September 2024.

Analyzing the Brain's Dynamic Response to Targeted Stimulation using Generative Modeling

Authors: Rishikesan Maran, Eli J. Müller, Ben D. Fulcher

Abstract: Generative models of brain activity have been instrumental in testing hypothesized mechanisms underlying brain dynamics against experimental datasets. Beyond capturing the key mechanisms underlying spontaneous brain dynamics, these models hold an exciting potential for understanding the mechanisms underlying the dynamics evoked by targeted brain-stimulation techniques. This paper delves into this… ▽ More Generative models of brain activity have been instrumental in testing hypothesized mechanisms underlying brain dynamics against experimental datasets. Beyond capturing the key mechanisms underlying spontaneous brain dynamics, these models hold an exciting potential for understanding the mechanisms underlying the dynamics evoked by targeted brain-stimulation techniques. This paper delves into this emerging application, using concepts from dynamical systems theory to argue that the stimulus-evoked dynamics in such experiments may be shaped by new types of mechanisms distinct from those that dominate spontaneous dynamics. We review and discuss: (i) the targeted experimental techniques across spatial scales that can both perturb the brain to novel states and resolve its relaxation trajectory back to spontaneous dynamics; and (ii) how we can understand these dynamics in terms of mechanisms using physiological, phenomenological, and data-driven models. A tight integration of targeted stimulation experiments with generative quantitative modeling provides an important opportunity to uncover novel mechanisms of brain dynamics that are difficult to detect in spontaneous settings. △ Less

Submitted 15 November, 2024; v1 submitted 29 July, 2024; originally announced July 2024.

Reactor Antineutrino Directionality Measurement with the PROSPECT-I Detector

Authors: M. Andriamirado, B. Balantekin, C. D. Bass, O. Benevides Rodrigues, E. P. Bernard, N. S. Bowden, C. D. Bryan, R. Carr, T. Classen, A. J. Conant, G. Deichert, M. J. Dolinski, A. Erickson, A. Galindo-Uribarri, S. Gokhale, C. Grant, S. Hans, A. B. Hansell, K. M. Heeger, B. Heffron, D. E. Jaffe, S. Jayakumar, D. C. Jones, J. R. Koblanski, P. Kunkle , et al. (24 additional authors not shown)

Abstract: The PROSPECT-I detector has several features that enable measurement of the direction of a compact neutrino source. In this paper, a detailed report on the directional measurements made on electron antineutrinos emitted from the High Flux Isotope Reactor is presented. With an estimated true neutrino (reactor to detector) direction of $φ= 40.8\unicode{xB0} \pm 0.7\unicode{xB0}$ and… ▽ More The PROSPECT-I detector has several features that enable measurement of the direction of a compact neutrino source. In this paper, a detailed report on the directional measurements made on electron antineutrinos emitted from the High Flux Isotope Reactor is presented. With an estimated true neutrino (reactor to detector) direction of $φ= 40.8\unicode{xB0} \pm 0.7\unicode{xB0}$ and $θ= 98.6\unicode{xB0} \pm 0.4\unicode{xB0}$, the PROSPECT-I detector is able to reconstruct an average neutrino direction of $φ= 39.4\unicode{xB0} \pm 2.9\unicode{xB0}$ and $θ= 97.6\unicode{xB0} \pm 1.6\unicode{xB0}$. This measurement is made with approximately 48000 Inverse Beta Decay signal events and is the most precise directional reconstruction of reactor antineutrinos to date. △ Less

Submitted 11 July, 2024; v1 submitted 12 June, 2024; originally announced June 2024.

Semi-analytical covariance matrices for two-point correlation function for DESI 2024 data

Authors: M. Rashkovetskyi, D. Forero-Sánchez, A. de Mattia, D. J. Eisenstein, N. Padmanabhan, H. Seo, A. J. Ross, J. Aguilar, S. Ahlen, O. Alves, U. Andrade, D. Brooks, E. Burtin, X. Chen, T. Claybaugh, S. Cole, A. de la Macorra, Z. Ding, P. Doel, K. Fanning, S. Ferraro, A. Font-Ribera, J. E. Forero-Romero, C. Garcia-Quintero, H. Gil-Marín , et al. (35 additional authors not shown)

Abstract: We present an optimized way of producing the fast semi-analytical covariance matrices for the Legendre moments of the two-point correlation function, taking into account survey geometry and mimicking the non-Gaussian effects. We validate the approach on simulated (mock) catalogs for different galaxy types, representative of the Dark Energy Spectroscopic Instrument (DESI) Data Release 1, used in 20… ▽ More We present an optimized way of producing the fast semi-analytical covariance matrices for the Legendre moments of the two-point correlation function, taking into account survey geometry and mimicking the non-Gaussian effects. We validate the approach on simulated (mock) catalogs for different galaxy types, representative of the Dark Energy Spectroscopic Instrument (DESI) Data Release 1, used in 2024 analyses. We find only a few percent differences between the mock sample covariance matrix and our results, which can be expected given the approximate nature of the mocks, although we do identify discrepancies between the shot-noise properties of the DESI fiber assignment algorithm and the faster approximation (emulator) used in the mocks. Importantly, we find a close agreement (<=8% relative differences) in the projected errorbars for distance scale parameters for the baryon acoustic oscillation measurements. This confirms our method as an attractive alternative to simulation-based covariance matrices, especially for non-standard models or galaxy sample selections, making it particularly relevant to the broad current and future analyses of DESI data. △ Less

Submitted 16 December, 2024; v1 submitted 3 April, 2024; originally announced April 2024.

Comments: This DESI Publication is part of the 2024 series using the first year of observations (see https://data.desi.lbl.gov/doc/papers/). 41 pages, 4 figures. Major rewrite after v2. Accepted to JCAP. Code available at https://github.com/oliverphilcox/RascalC and https://github.com/cosmodesi/RascalC-scripts/tree/DESI2024. Figure and table data available at https://zenodo.org/doi/10.5281/zenodo.10895161

Journal ref: JCAP 01 (2025) 145

Calibrating coordinate system alignment in a scanning transmission electron microscope using a digital twin

Authors: Dieter Weber, David Landers, Chen Huang, Emanuela Liberti, Emiliya Poghosyan, Matthew Bryan, Alexander Clausen, Daniel G. Stroppa, Angus I. Kirkland, Elisabeth Müller, Andrew Stewart, Rafal E. Dunin-Borkowski

Abstract: In four-dimensional scanning transmission electron microscopy (4D STEM) a focused beam is scanned over a specimen and a diffraction pattern is recorded at each position using a pixelated detector. During the experiment, it must be ensured that the scan coordinate system of the beam is correctly calibrated relative to the detector coordinate system. Various simplified and approximate models are use… ▽ More In four-dimensional scanning transmission electron microscopy (4D STEM) a focused beam is scanned over a specimen and a diffraction pattern is recorded at each position using a pixelated detector. During the experiment, it must be ensured that the scan coordinate system of the beam is correctly calibrated relative to the detector coordinate system. Various simplified and approximate models are used implicitly and explicitly for understanding and analyzing the recorded data, requiring translation between the physical reality of the instrument and the abstractions used in data interpretation. Here, we introduce a calibration method where interactive live data processing in combination with a digital twin is used to match a set of models and their parameters with the action of a real-world instrument. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Large Eddy Simulation of the evolution of the soot size distribution in turbulent nonpremixed bluff body flames

Authors: Hernando Maldonado Colmán, Michael E. Mueller

Abstract: Large Eddy Simulation (LES) was used to investigate the evolution of the soot size distribution in a series of turbulent nonpremixed bluff body flames, with different bluff body diameters. The new Bivariate Multi-Moment Sectional Method (BMMSM) is employed to characterize the size distribution. BMMSM combines elements of sectional methods and methods of moments and is capable of reproducing fracta… ▽ More Large Eddy Simulation (LES) was used to investigate the evolution of the soot size distribution in a series of turbulent nonpremixed bluff body flames, with different bluff body diameters. The new Bivariate Multi-Moment Sectional Method (BMMSM) is employed to characterize the size distribution. BMMSM combines elements of sectional methods and methods of moments and is capable of reproducing fractal aggregate morphology, thanks to its joint volume-surface formulation, all at relatively low computational costs with fewer transported soot scalars compared to traditional sectional methods. LES results show soot volume fraction profiles agreeing correctly with the experimental measurements, exhibiting significant improvement compared to previous work using the HMOM. The evolution of the particle size distribution function (PSDF) was examined across the flame series and show that the size distribution is less sensitive to the bluff body diameter than the overall soot volume fraction, which increases with increasing bluff body diameter. The PSDF across the flame exhibit different features compared to turbulent nonpremixed jet flames. The long residence times in the recirculation zone leads to a nearly bimodal size distribution, which eventually becomes bimodal in the downstream jet-like region. Further analysis indicates that a size distribution model is needed to correctly predict the soot evolution. Remarkably, due to improved descriptions of oxidation with BMMSM compared to HMOM, significant nucleation and condensation rates in both the recirculation zone and jet-like region were found using BMMSM, on the same order of magnitude as surface growth and oxidation, leading to the improved prediction of mean soot volume fraction compared to HMOM. This work reveals that the need of size distribution is crucial to both predict global soot quantities accurately and reproduce fundamental mechanisms. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Large Eddy Simulation of the evolution of the soot size distribution in turbulent nonpremixed flames using the Bivariate Multi-Moment Sectional Method

Authors: Hernando Maldonado Colmán, Michael E. Mueller

Abstract: A joint volume-surface formalism of the Multi-Moment Sectional Method (MMSM) is developed to describe the evolution of soot size distribution in turbulent reacting flows. The bivariate MMSM (or BMMSM) considers three statistical moments per section, including the total soot number density, total soot volume, and total soot surface area per section. A linear profile along the volume coordinate is c… ▽ More A joint volume-surface formalism of the Multi-Moment Sectional Method (MMSM) is developed to describe the evolution of soot size distribution in turbulent reacting flows. The bivariate MMSM (or BMMSM) considers three statistical moments per section, including the total soot number density, total soot volume, and total soot surface area per section. A linear profile along the volume coordinate is considered to reconstruct the size distribution within each section, which weights a delta function along the surface coordinate. The closure for the surface considers that the primary particle diameter is constant so the surface/volume ratio constant within each section. The inclusion of the new variable in BMMSM allows for the description of soot's fractal aggregate morphology compared to the strictly spherical assumption of its univariate predecessor. BMMSM is shown to reproduce bimodal soot size distributions in simulations of one-dimensional laminar sooting flames as in experimental measurements. To demonstrate its performance in turbulent reacting flows, BMMSM is coupled to a Large Eddy Simulation framework to simulate a laboratory-scale turbulent nonpremixed jet flame. Computational results are validated against available experimental measurements of soot size distribution, showing the ability of BMMSM to reproduce the evolution of the size distribution from unimodal to bimodal moving downstream in the flame. In general, varying the number of sections has limited influence on results, and accurate results are obtained with as few as eight sections so 24 total degrees of freedom. The impact of using a different statistical model for soot (HMOM) is also investigated. The total computational cost of using BMMSM as low as approximately 44% more than the cost of HMOM. The new formulation results in a computationally efficient approach for the soot size distribution in turbulent reacting flows. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Accessing new physics with an undoped, cryogenic CsI CEvNS detector for COHERENT at the SNS

Authors: P. S. Barbeau, V. Belov, I. Bernardi, C. Bock, A. Bolozdynya, R. Bouabid, J. Browning, B. Cabrera-Palmer, E. Conley, V. da Silva, J. Daughhetee, J. Detwiler, K. Ding, M. R. Durand, Y. Efremenko, S. R. Elliott, A. Erlandson, L. Fabris, M. Febbraro, A. Galindo-Uribarri, M. P. Green, J. Hakenmüller, M. R. Heath, S. Hedges, B. A. Johnson , et al. (55 additional authors not shown)

Abstract: We consider the potential for a 10-kg undoped cryogenic CsI detector operating at the Spallation Neutron Source to measure coherent elastic neutrino-nucleus scattering and its sensitivity to discover new physics beyond the standard model. Through a combination of increased event rate, lower threshold, and good timing resolution, such a detector would significantly improve on past measurements. We… ▽ More We consider the potential for a 10-kg undoped cryogenic CsI detector operating at the Spallation Neutron Source to measure coherent elastic neutrino-nucleus scattering and its sensitivity to discover new physics beyond the standard model. Through a combination of increased event rate, lower threshold, and good timing resolution, such a detector would significantly improve on past measurements. We considered tests of several beyond-the-standard-model scenarios such as neutrino non-standard interactions and accelerator-produced dark matter. This detector's performance was also studied for relevant questions in nuclear physics and neutrino astronomy, namely the weak charge distribution of CsI nuclei and detection of neutrinos from a core-collapse supernova. △ Less

Submitted 21 November, 2023; originally announced November 2023.

Initial state preparation for quantum chemistry on quantum computers

Authors: Stepan Fomichev, Kasra Hejazi, Modjtaba Shokrian Zini, Matthew Kiser, Joana Fraxanet Morales, Pablo Antonio Moreno Casares, Alain Delgado, Joonsuk Huh, Arne-Christian Voigt, Jonathan E. Mueller, Juan Miguel Arrazola

Abstract: Quantum algorithms for ground-state energy estimation of chemical systems require a high-quality initial state. However, initial state preparation is commonly either neglected entirely, or assumed to be solved by a simple product state like Hartree-Fock. Even if a nontrivial state is prepared, strong correlations render ground state overlap inadequate for quality assessment. In this work, we addre… ▽ More Quantum algorithms for ground-state energy estimation of chemical systems require a high-quality initial state. However, initial state preparation is commonly either neglected entirely, or assumed to be solved by a simple product state like Hartree-Fock. Even if a nontrivial state is prepared, strong correlations render ground state overlap inadequate for quality assessment. In this work, we address the initial state preparation problem with an end-to-end algorithm that prepares and quantifies the quality of initial states, accomplishing the latter with a new metric -- the energy distribution. To be able to prepare more complicated initial states, we introduce an implementation technique for states in the form of a sum of Slater determinants that exhibits significantly better scaling than all prior approaches. We also propose low-precision quantum phase estimation (QPE) for further state quality refinement. The complete algorithm is capable of generating high-quality states for energy estimation, and is shown in select cases to lower the overall estimation cost by several orders of magnitude when compared with the best single product state ansatz. More broadly, the energy distribution picture suggests that the goal of QPE should be reinterpreted as generating improvements compared to the energy of the initial state and other classical estimates, which can still be achieved even if QPE does not project directly onto the ground state. Finally, we show how the energy distribution can help in identifying potential quantum advantage. △ Less

Submitted 8 February, 2024; v1 submitted 27 October, 2023; originally announced October 2023.

Workshop on a future muon program at FNAL

Authors: S. Corrodi, Y. Oksuzian, A. Edmonds, J. Miller, H. N. Tran, R. Bonventre, D. N. Brown, F. Meot, V. Singh, Y. Kolomensky, S. Tripathy, L. Borrel, M. Bub, B. Echenard, D. G. Hitlin, H. Jafree, S. Middleton, R. Plestid, F. C. Porter, R. Y. Zhu, L. Bottura, E. Pinsard, A. M. Teixeira, C. Carelli, D. Ambrose , et al. (68 additional authors not shown)

Abstract: The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e… ▽ More The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e.g., muon collider). Topics included high-power targetry, status of R&D for Mu2e-II, development of compressor rings, FFA and concepts for muon experiments (conversion, decays, muonium and other opportunities) at AMF. This document summarizes the workshop discussions with a focus on future R&D tasks needed to realize these concepts. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Comments: 68 pages, 36 figures

Report number: FERMILAB-CONF-23-464-PPD, CALT-TH-2023-036

COHERENT Collaboration data release from the measurements of CsI[Na] response to nuclear recoils

Authors: D. Akimov, P. An, C. Awe, P. S. Barbeau, B. Becker, V. Belov, I. Bernardi, M. A. Blackston, C. Bock, A. Bolozdynya, J. Browning, B. Cabrera-Palmer, D. Chernyak, E. Conley, J. Daughhetee, J. Detwiler, K. Ding, M. R. Durand, Y. Efremenko, S. R. Elliott, L. Fabris, M. Febbraro, A. Gallo Rosso, A. Galindo-Uribarri, M. P. Green , et al. (53 additional authors not shown)

Abstract: Description of the data release 10.13139/OLCF/1969085 (https://doi.ccs.ornl.gov/ui/doi/426) from the measurements of the CsI[Na] response to low energy nuclear recoils by the COHERENT collaboration. The release corresponds to the results published in "D. Akimov et al 2022 JINST 17 P10034". We share the data in the form of raw ADC waveforms, provide benchmark values, and share plots to enhance the… ▽ More Description of the data release 10.13139/OLCF/1969085 (https://doi.ccs.ornl.gov/ui/doi/426) from the measurements of the CsI[Na] response to low energy nuclear recoils by the COHERENT collaboration. The release corresponds to the results published in "D. Akimov et al 2022 JINST 17 P10034". We share the data in the form of raw ADC waveforms, provide benchmark values, and share plots to enhance the transparency and reproducibility of our results. This document describes the contents of the data release as well as guidance on the use of the data. △ Less

Submitted 14 July, 2023; originally announced July 2023.

Improving Met Office Weather and Climate Forecasts with Bespoke Multigrid Solvers

Authors: Andrew Malcolm, Eike H. Müller, Robert Scheichl

Abstract: At the heart of the Met Office climate and weather forecasting capabilities lies a sophisticated numerical model which solves the equations of large-scale atmospheric flow. Since this model uses semi-implicit time-stepping, it requires the repeated solution of a large sparse system of linear equations with hundreds of millions of unknowns. This is one of the computational bottlenecks of operationa… ▽ More At the heart of the Met Office climate and weather forecasting capabilities lies a sophisticated numerical model which solves the equations of large-scale atmospheric flow. Since this model uses semi-implicit time-stepping, it requires the repeated solution of a large sparse system of linear equations with hundreds of millions of unknowns. This is one of the computational bottlenecks of operational forecasts and efficient numerical algorithms are crucial to ensure optimal performance. We developed and implemented a bespoke multigrid solver to address this challenge. Our solver reduces the time for solving the linear system by a factor two, compared to the previously used BiCGStab method. This leads to significant improvements of overall model performance: global forecasts can be produced 10%-15% faster. Multigrid also avoids stagnating convergence of the iterative scheme in single precision. By allowing better utilisation of computational resources, our work has led to estimated annual cost savings of GBP 300k for the Met Office. △ Less

Submitted 23 November, 2023; v1 submitted 10 July, 2023; originally announced July 2023.

Comments: 6 pages, 2 figures, 1 table; This is a preprint of the following chapter: A. Malcolm, E. H. Mueller, R. Scheichl: "Improving Met Office Weather and Climate Forecasts with Bespoke Multigrid Solvers", to be published in "More UK Success Stories in Industrial Mathematics", edited by Philip J. Aston, 2024, Springer reproduced with permission of Springer Nature Switzerland AG

MSC Class: 65F08; 65N55; 65Y05; 76M20; 86A10 ACM Class: G.1.3; G.1.8; J.2

Local primordial non-Gaussianity from the large-scale clustering of photometric DESI luminous red galaxies

Authors: Mehdi Rezaie, Ashley J. Ross, Hee-Jong Seo, Hui Kong, Anna Porredon, Lado Samushia, Edmond Chaussidon, Alex Krolewski, Arnaud de Mattia, Florian Beutler, Jessica Nicole Aguilar, Steven Ahlen, Shadab Alam, Santiago Avila, Benedict Bahr-Kalus, Jose Bermejo-Climent, David Brooks, Todd Claybaugh, Shaun Cole, Kyle Dawson, Axel de la Macorra, Peter Doel, Andreu Font-Ribera, Jaime E. Forero-Romero, Satya Gontcho A Gontcho , et al. (24 additional authors not shown)

Abstract: We use angular clustering of luminous red galaxies from the Dark Energy Spectroscopic Instrument (DESI) imaging surveys to constrain the local primordial non-Gaussianity parameter $\fnl$. Our sample comprises over 12 million targets, covering 14,000 square degrees of the sky, with redshifts in the range $0.2< z < 1.35$. We identify Galactic extinction, survey depth, and astronomical seeing as the… ▽ More We use angular clustering of luminous red galaxies from the Dark Energy Spectroscopic Instrument (DESI) imaging surveys to constrain the local primordial non-Gaussianity parameter $\fnl$. Our sample comprises over 12 million targets, covering 14,000 square degrees of the sky, with redshifts in the range $0.2< z < 1.35$. We identify Galactic extinction, survey depth, and astronomical seeing as the primary sources of systematic error, and employ linear regression and artificial neural networks to alleviate non-cosmological excess clustering on large scales. Our methods are tested against simulations with and without $\fnl$ and systematics, showing superior performance of the neural network treatment. The neural network with a set of nine imaging property maps passes our systematic null test criteria, and is chosen as the fiducial treatment. Assuming the universality relation, we find $\fnl = 34^{+24(+50)}_{-44(-73)}$ at 68\%(95\%) confidence. We apply a series of robustness tests (e.g., cuts on imaging, declination, or scales used) that show consistency in the obtained constraints. We study how the regression method biases the measured angular power-spectrum and degrades the $\fnl$ constraining power. The use of the nine maps more than doubles the uncertainty compared to using only the three primary maps in the regression. Our results thus motivate the development of more efficient methods that avoid over-correction, protect large-scale clustering information, and preserve constraining power. Additionally, our results encourage further studies of $\fnl$ with DESI spectroscopic samples, where the inclusion of 3D clustering modes should help separate imaging systematics and lessen the degradation in the $\fnl$ uncertainty. △ Less

Submitted 25 June, 2024; v1 submitted 4 July, 2023; originally announced July 2023.

Comments: 21 pages, 17 figures, 7 tables (Appendix excluded). Published in MNRAS

A dynamic wall modeling approach for Large Eddy Simulation of offshore wind farms in realistic oceanic conditions

Authors: Aditya K. Aiyer, Luc Deike, Michael E. Mueller

Abstract: Due to the multitude of scales present in realistic oceanic conditions, resolving the surface stress is computationally intensive, motivating modeling approaches. In this work, a dynamic wave drag model is developed for Large Eddy Simulation to quantify the effects of multiscale dynamically rough surfaces on the atmospheric boundary layer. The waves are vertically unresolved, and the total drag du… ▽ More Due to the multitude of scales present in realistic oceanic conditions, resolving the surface stress is computationally intensive, motivating modeling approaches. In this work, a dynamic wave drag model is developed for Large Eddy Simulation to quantify the effects of multiscale dynamically rough surfaces on the atmospheric boundary layer. The waves are vertically unresolved, and the total drag due to the horizontally resolved portion of the wave spectrum is computed through a superposition of the force from each mode. As LES can only resolve the horizontal wind-wave interactions to the filter scale $Δ$, the effects of the horizontally unresolved, subfilter waves are modeled by specifying a roughness length scale characterizing the unresolved wave energy spectrum. This subfilter roughness is set proportional to the subfilter root-mean-square of the height distribution, and the constant of proportionality is evaluated dynamically during the simulation based on the assumption that the total drag force at the wave surface is independent of the filter scale. The dynamic approach is used to simulate the airflow over a spectrum of moving waves and the results are validated against high-fidelity phase-resolved simulations. The dynamic approach combined with the wave spectrum drag model is then used to study flow through a fixed-bottom offshore wind farm. The dynamic model accurately adapts to the changing velocity field and accurately predicts the mean velocity profiles and power produced from the offshore wind farm. Further, the effect of the wind-wave interactions on the mean velocity profiles, power production, and kinetic energy budget are quantified. △ Less

Submitted 19 May, 2023; originally announced May 2023.

Comments: Under Review

Calibration strategy of the PROSPECT-II detector with external and intrinsic sources

Authors: M. Andriamirado, A. B. Balantekin, C. D. Bass, D. E. Bergeron, E. P. Bernard, N. S. Bowden, C. D. Bryan, R. Carr, T. Classen, A. J. Conant, A. Delgado, M. V. Diwan, M. J. Dolinski, A. Erickson, B. T. Foust, J. K. Gaison, A. Galindo-Uribarri, C. E. Gilbert, S. Gokhale, C. Grant, S. Hans, A. B. Hansell, K. M. Heeger, B. Heffron, D. E. Jaffe , et al. (36 additional authors not shown)

Abstract: This paper presents an energy calibration scheme for an upgraded reactor antineutrino detector for the Precision Reactor Oscillation and Spectrum Experiment (PROSPECT). The PROSPECT collaboration is preparing an upgraded detector, PROSPECT-II (P-II), to advance capabilities for the investigation of fundamental neutrino physics, fission processes and associated reactor neutrino flux, and nuclear se… ▽ More This paper presents an energy calibration scheme for an upgraded reactor antineutrino detector for the Precision Reactor Oscillation and Spectrum Experiment (PROSPECT). The PROSPECT collaboration is preparing an upgraded detector, PROSPECT-II (P-II), to advance capabilities for the investigation of fundamental neutrino physics, fission processes and associated reactor neutrino flux, and nuclear security applications. P-II will expand the statistical power of the original PROSPECT (P-I) dataset by at least an order of magnitude. The new design builds upon previous P-I design and focuses on improving the detector robustness and long-term stability to enable multi-year operation at one or more sites. The new design optimizes the fiducial volume by elimination of dead space previously occupied by internal calibration channels, which in turn necessitates the external deployment. In this paper, we describe a calibration strategy for P-II. The expected performance of externally deployed calibration sources is evaluated using P-I data and a well-benchmarked simulation package by varying detector segmentation configurations in the analysis. The proposed external calibration scheme delivers a compatible energy scale model and achieves comparable performance with the inclusion of an additional AmBe neutron source, in comparison to the previous internal arrangement. Most importantly, the estimated uncertainty contribution from the external energy scale calibration model meets the precision requirements of the P-II experiment. △ Less

Submitted 10 April, 2023; v1 submitted 17 November, 2022; originally announced November 2022.

Comments: 19 pages, 10 figures

Hybridised multigrid preconditioners for a compatible finite element dynamical core

Authors: Jack D. Betteridge, Colin J. Cotter, Thomas H. Gibson, Matthew J. Griffith, Thomas Melvin, Eike H. Müller

Abstract: Compatible finite element discretisations for the atmospheric equations of motion have recently attracted considerable interest. Semi-implicit timestepping methods require the repeated solution of a large saddle-point system of linear equations. Preconditioning this system is challenging since the velocity mass matrix is non-diagonal, leading to a dense Schur complement. Hybridisable discretisatio… ▽ More Compatible finite element discretisations for the atmospheric equations of motion have recently attracted considerable interest. Semi-implicit timestepping methods require the repeated solution of a large saddle-point system of linear equations. Preconditioning this system is challenging since the velocity mass matrix is non-diagonal, leading to a dense Schur complement. Hybridisable discretisations overcome this issue: weakly enforcing continuity of the velocity field with Lagrange multipliers leads to a sparse system of equations, which has a similar structure to the pressure Schur complement in traditional approaches. We describe how the hybridised sparse system can be preconditioned with a non-nested two-level preconditioner. To solve the coarse system, we use the multigrid pressure solver that is employed in the approximate Schur complement method previously proposed by the some of the authors. Our approach significantly reduces the number of solver iterations. The method shows excellent performance and scales to large numbers of cores in the Met Office next-generation climate- and weather prediction model LFRic. △ Less

Submitted 19 June, 2023; v1 submitted 21 October, 2022; originally announced October 2022.

Comments: 24 pages, 13 figures, 5 tables; accepted for publication in Quarterly Journal of the Royal Meteorological Society

MSC Class: 65F08; 65N55; 76M10; 86A10; 65Y05 ACM Class: G.1.3; G.1.8; J.2

Exact conservation laws for neural network integrators of dynamical systems

Authors: Eike Hermann Müller

Abstract: The solution of time dependent differential equations with neural networks has attracted a lot of attention recently. The central idea is to learn the laws that govern the evolution of the solution from data, which might be polluted with random noise. However, in contrast to other machine learning applications, usually a lot is known about the system at hand. For example, for many dynamical system… ▽ More The solution of time dependent differential equations with neural networks has attracted a lot of attention recently. The central idea is to learn the laws that govern the evolution of the solution from data, which might be polluted with random noise. However, in contrast to other machine learning applications, usually a lot is known about the system at hand. For example, for many dynamical systems physical quantities such as energy or (angular) momentum are exactly conserved. Hence, the neural network has to learn these conservation laws from data and they will only be satisfied approximately due to finite training time and random noise. In this paper we present an alternative approach which uses Noether's Theorem to inherently incorporate conservation laws into the architecture of the neural network. We demonstrate that this leads to better predictions for three model systems: the motion of a non-relativistic particle in a three-dimensional Newtonian gravitational potential, the motion of a massive relativistic particle in the Schwarzschild metric and a system of two interacting particles in four dimensions. △ Less

Submitted 14 May, 2023; v1 submitted 23 September, 2022; originally announced September 2022.

Comments: 24 pages, 16 figures; to appear in Journal of Computational Physics

MSC Class: 65L05; 68T07; 70H33; 70H40; 83C10 ACM Class: G.1.7

The Kinetic Energy of PAH Dication and Trication Dissociation Determined by Recoil-Frame Covariance Map Imaging

Authors: Jason W. L. Lee, Denis S. Tikhonov, Felix Allum, Rebecca Boll, Pragya Chopra, Benjamin Erk, Sebastian Gruet, Lanhai He, David Heathcote, Mehdi M. Kazemi, Jan Lahl, Alexander K. Lemmens, Donatella Loru, Sylvain Maclot, Robert Mason, Erland Müller, Terry Mullins, Christopher Passow, Jasper Peschel, Daniel Ramm, Amanda L. Steber, Sadia Bari, Mark Brouard, Michael Burt, Jochen Küpper , et al. (6 additional authors not shown)

Abstract: We investigated the dissociation of dications and trications of three polycyclic aromatic hydrocarbons (PAHs), fluorene, phenanthrene, and pyrene. PAHs are a family of molecules ubiquitous in space and involved in much of the chemistry of the interstellar medium. In our experiments, ions are formed by interaction with 30.3 nm extreme ultraviolet (XUV) photons, and their velocity map images are rec… ▽ More We investigated the dissociation of dications and trications of three polycyclic aromatic hydrocarbons (PAHs), fluorene, phenanthrene, and pyrene. PAHs are a family of molecules ubiquitous in space and involved in much of the chemistry of the interstellar medium. In our experiments, ions are formed by interaction with 30.3 nm extreme ultraviolet (XUV) photons, and their velocity map images are recorded using a PImMS2 multi-mass imaging sensor. Application of recoil-frame covariance analysis allows the total kinetic energy release (TKER) associated with multiple fragmentation channels to be determined to high precision, ranging 1.94-2.60 eV and 2.95-5.29 eV for the dications and trications, respectively. Experimental measurements are supported by Born-Oppenheimer molecular dynamics (BOMD) simulations. △ Less

Submitted 17 June, 2022; originally announced June 2022.

Beam Longitudinal Dynamics Simulation Suite BLonD

Authors: Helga Timko, Simon Albright, Theodoros Argyropoulos, Konstantinos Iliakis, Birk Emil Karlsen-Bæck, Ivan Karpov, Alexandre Lasheen, Luis Eduardo Medina, Danilo Quartullo, Joël Repond, Juan Esteban Müller, Markus Schwarz, Panagiotis Tsapatsaris, Georgios Typaldos

Abstract: The beam longitudinal dynamics code BLonD has been developed at CERN since 2014 and has become a central tool for longitudinal beam dynamics simulations. In this paper, we present this modular simulation suite and the various physics models that can be included and combined by the user. We detail the reference frame, the equations of motion, the BLonD-specific options for radio-frequency parameter… ▽ More The beam longitudinal dynamics code BLonD has been developed at CERN since 2014 and has become a central tool for longitudinal beam dynamics simulations. In this paper, we present this modular simulation suite and the various physics models that can be included and combined by the user. We detail the reference frame, the equations of motion, the BLonD-specific options for radio-frequency parameters such as phase noise, fixed-field acceleration, and feedback models for the CERN accelerators, as well as the modeling of collective effects and synchrotron radiation. We also present various methods of generating multi-bunch distributions matched to a given impedance model. BLonD is furthermore a well-tested and optimized simulation suite, which is demonstrated through examples, too. △ Less

Submitted 3 October, 2022; v1 submitted 16 June, 2022; originally announced June 2022.

The COHERENT Experimental Program

Authors: D. Akimov, S. Alawabdeh, P. An, A. Arteaga, C. Awe, P. S. Barbeau, C. Barry, B. Becker, V. Belov, I. Bernardi, M. A. Blackston, L. Blokland, C. Bock, B. Bodur, A. Bolozdynya, R. Bouabid, A. Bracho, J. Browning, B. Cabrera-Palmer, N. Chen, D. Chernyak, E. Conley, J. Daughhetee, J. Daughtry, E. Day , et al. (106 additional authors not shown)

Abstract: The COHERENT experiment located in Neutrino Alley at the Spallation Neutron Source (SNS), Oak Ridge National Laboratory (ORNL), has made the world's first two measurements of coherent elastic neutrino-nucleus scattering (CEvNS), on CsI and argon, using neutrinos produced at the SNS. The COHERENT collaboration continues to pursue CEvNS measurements on various targets as well as additional studies o… ▽ More The COHERENT experiment located in Neutrino Alley at the Spallation Neutron Source (SNS), Oak Ridge National Laboratory (ORNL), has made the world's first two measurements of coherent elastic neutrino-nucleus scattering (CEvNS), on CsI and argon, using neutrinos produced at the SNS. The COHERENT collaboration continues to pursue CEvNS measurements on various targets as well as additional studies of inelastic neutrino-nucleus interactions, searches for accelerator-produced dark matter (DM) and physics beyond the Standard Model, using the uniquely high-quality and high-intensity neutrino source available at the SNS. This white paper describes primarily COHERENT's ongoing and near-future program at the SNS First Target Station (FTS). Opportunities enabled by the SNS Second Target Station (STS) for the study of neutrino physics and development of novel detector technologies are elaborated in a separate white paper. △ Less

Submitted 9 April, 2022; originally announced April 2022.

Comments: 38 papers, 24 figures; Snowmass contribution

Engineered Dissipation for Quantum Information Science

Authors: Patrick M. Harrington, Erich Mueller, Kater Murch

Abstract: Quantum information processing relies on precise control of non-classical states in the presence of many uncontrolled environmental degrees of freedom -- requiring careful orchestration of how the relevant degrees of freedom interact with that environment. These interactions are often viewed as detrimental, as they dissipate energy and decohere quantum states. Nonetheless, when controlled, dissipa… ▽ More Quantum information processing relies on precise control of non-classical states in the presence of many uncontrolled environmental degrees of freedom -- requiring careful orchestration of how the relevant degrees of freedom interact with that environment. These interactions are often viewed as detrimental, as they dissipate energy and decohere quantum states. Nonetheless, when controlled, dissipation is an essential tool for manipulating quantum information: Dissipation engineering enables quantum measurement, quantum state preparation, and quantum state stabilization. The progress of quantum device technology, marked by improvements of characteristic coherence times and extensible architectures for quantum control, has coincided with the development of such dissipation engineering tools which interface quantum and classical degrees of freedom. This Review presents dissipation as a fundamental aspect of the measurement and control of quantum devices and highlights the role of dissipation engineering for quantum error correction and quantum simulation that enables quantum information processing on a practical scale. △ Less

Submitted 30 May, 2022; v1 submitted 10 February, 2022; originally announced February 2022.

Comments: Review article: 32 pages, 4 figures, 2 boxes

Journal ref: Nat Rev Phys 4, 660-671 (2022)

Water flow in single-wall nanotubes: Oxygen makes it slip, hydrogen makes it stick

Authors: Fabian L Thiemann, Christoph Schran, Patrick Rowe, Erich A Müller, Angelos Michaelides

Abstract: Experimental measurements have reported ultra-fast and radius-dependent water transport in carbon nanotubes which are absent in boron nitride nanotubes. Despite considerable effort, the origin of this contrasting (and fascinating) behaviour is not understood. Here, with the aid of machine learning-based molecular dynamics simulations that deliver first-principles accuracy, we investigate water tra… ▽ More Experimental measurements have reported ultra-fast and radius-dependent water transport in carbon nanotubes which are absent in boron nitride nanotubes. Despite considerable effort, the origin of this contrasting (and fascinating) behaviour is not understood. Here, with the aid of machine learning-based molecular dynamics simulations that deliver first-principles accuracy, we investigate water transport in single-wall carbon and boron nitride nanotubes. Our simulations reveal a large, radius-dependent hydrodynamic slippage on both materials with water experiencing indeed a $\approx 5$ times lower friction on carbon surfaces compared to boron nitride. Analysis of the diffusion mechanisms across the two materials reveals that the fast water transport on carbon is governed by facile oxygen motion, whereas the higher friction on boron nitride arises from specific hydrogen-nitrogen interactions. This work not only delivers a clear reference of unprecedented accuracy for water flow in single-wall nanotubes, but also provides detailed mechanistic insight into its radius and material dependence for future technological application. △ Less

Submitted 10 February, 2022; originally announced February 2022.

Uniform-in-Phase-Space Data Selection with Iterative Normalizing Flows

Authors: Malik Hassanaly, Bruce A. Perry, Michael E. Mueller, Shashank Yellapantula

Abstract: Improvements in computational and experimental capabilities are rapidly increasing the amount of scientific data that is routinely generated. In applications that are constrained by memory and computational intensity, excessively large datasets may hinder scientific discovery, making data reduction a critical component of data-driven methods. Datasets are growing in two directions: the number of d… ▽ More Improvements in computational and experimental capabilities are rapidly increasing the amount of scientific data that is routinely generated. In applications that are constrained by memory and computational intensity, excessively large datasets may hinder scientific discovery, making data reduction a critical component of data-driven methods. Datasets are growing in two directions: the number of data points and their dimensionality. Whereas dimension reduction typically aims at describing each data sample on lower-dimensional space, the focus here is on reducing the number of data points. A strategy is proposed to select data points such that they uniformly span the phase-space of the data. The algorithm proposed relies on estimating the probability map of the data and using it to construct an acceptance probability. An iterative method is used to accurately estimate the probability of the rare data points when only a small subset of the dataset is used to construct the probability map. Instead of binning the phase-space to estimate the probability map, its functional form is approximated with a normalizing flow. Therefore, the method naturally extends to high-dimensional datasets. The proposed framework is demonstrated as a viable pathway to enable data-efficient machine learning when abundant data is available. An implementation of the method is available in a companion repository (https://github.com/NREL/Phase-space-sampling). △ Less

Submitted 27 February, 2023; v1 submitted 28 December, 2021; originally announced December 2021.

Comments: 26 pages, 23 figures, 5 tables

A sea surface-based drag model for Large Eddy Simulation of wind-wave interaction

Authors: Aditya K. Aiyer, Luc Deike, Michael E. Mueller

Abstract: Monin-Obukhov similarity theory (MOST) is a well-tested approach for specifying the fluxes when the roughness surfaces are homogeneous. For flow over waves (inhomogeneous surfaces), phase-averaged roughness length scales are often prescribed through models based on the wave characteristics and the wind speed. However, such approaches lack generalizability over different wave ages and steepnesses d… ▽ More Monin-Obukhov similarity theory (MOST) is a well-tested approach for specifying the fluxes when the roughness surfaces are homogeneous. For flow over waves (inhomogeneous surfaces), phase-averaged roughness length scales are often prescribed through models based on the wave characteristics and the wind speed. However, such approaches lack generalizability over different wave ages and steepnesses due to the reliance on model coefficients tuned to specific datasets. In this paper, a sea surface-based hydrodynamic drag model applicable to moving surfaces is developed to model the pressure-based surface drag felt by the wind due to the waves. The model is based on the surface gradient approach of \citet{Anderson2010} applicable to stationary obstacles and extended here to the wind-wave problem. The wave drag model proposed specifies the hydrodynamic force based on the incoming momentum flux, wave phase speed, and the surface frontal area. The drag coefficient associated with the wind-wave momentum exchange is determined based on the wave steepness. The wave drag model is used to simulate turbulent airflow above a monochromatic wave train with different wave ages and wave steepnesses. The mean velocity profiles and model form stresses are validated with available lab-scale experimental data and show good agreement across a wide range of wave steepnesses and wave ages. The drag force is correlated with the wave surface gradient and out-of-phase with the wave height distribution by a factor $π/2$ for the sinusoidal wave-train considered. These results demonstrate that the current approach is sufficiently general over a wide parameter space compared to wave phase-averaged models with a minimal increase in computational cost. △ Less

Submitted 7 September, 2022; v1 submitted 13 December, 2021; originally announced December 2021.

Comments: Accepted for publication in the Journal of Atmospheric Sciences

Monitoring the SNS basement neutron background with the MARS detector

Authors: COHERENT Collaboration, D. Akimov, P. An, C. Awe, P. S. Barbeau, B. Becker, V. Belov, I. Bernardi, M. A. Blackston, C. Bock, A. Bolozdynya, J. Browning, B. Cabrera-Palmer, D. Chernyak, E. Conley, J. Daughhetee, J. Detwiler, K. Ding, M. R. Durand, Y. Efremenko, S. R. Elliott, L. Fabris, M. Febbraro, A. Gallo Rosso, A. Galindo-Uribarri , et al. (53 additional authors not shown)

Abstract: We present the analysis and results of the first dataset collected with the MARS neutron detector deployed at the Oak Ridge National Laboratory Spallation Neutron Source (SNS) for the purpose of monitoring and characterizing the beam-related neutron (BRN) background for the COHERENT collaboration. MARS was positioned next to the COH-CsI coherent elastic neutrino-nucleus scattering detector in the… ▽ More We present the analysis and results of the first dataset collected with the MARS neutron detector deployed at the Oak Ridge National Laboratory Spallation Neutron Source (SNS) for the purpose of monitoring and characterizing the beam-related neutron (BRN) background for the COHERENT collaboration. MARS was positioned next to the COH-CsI coherent elastic neutrino-nucleus scattering detector in the SNS basement corridor. This is the basement location of closest proximity to the SNS target and thus, of highest neutrino flux, but it is also well shielded from the BRN flux by infill concrete and gravel. These data show the detector registered roughly one BRN per day. Using MARS' measured detection efficiency, the incoming BRN flux is estimated to be $1.20~\pm~0.56~\text{neutrons}/\text{m}^2/\text{MWh}$ for neutron energies above $\sim3.5$ MeV and up to a few tens of MeV. We compare our results with previous BRN measurements in the SNS basement corridor reported by other neutron detectors. △ Less

Submitted 14 April, 2022; v1 submitted 5 December, 2021; originally announced December 2021.

Journal ref: JINST 17 P03021 (2022)

Rotating Bose gas dynamically entering the lowest Landau level

Authors: Vaibhav Sharma, Erich J Mueller

Abstract: Motivated by recent experiments, we model the dynamics of a condensed Bose gas in a rotating anisotropic trap, where the equations of motion are analogous to those of charged particles in a magnetic field. As the rotation rate is ramped from zero to the trapping frequency, the condensate stretches along one direction and is squeezed along another, becoming long and thin. When the trap anisotropy i… ▽ More Motivated by recent experiments, we model the dynamics of a condensed Bose gas in a rotating anisotropic trap, where the equations of motion are analogous to those of charged particles in a magnetic field. As the rotation rate is ramped from zero to the trapping frequency, the condensate stretches along one direction and is squeezed along another, becoming long and thin. When the trap anisotropy is slowly switched off on a particular timescale, the condensate is left in the lowest Landau level. We use a time dependent variational approach to quantify these dynamics and give intuitive arguments about the structure of the condensate wavefunction. This preparation of a lowest Landau level condensate can be an important first step in realizing bosonic analogs of quantum Hall states. △ Less

Submitted 7 February, 2022; v1 submitted 19 November, 2021; originally announced November 2021.

Comments: 8 pages, 5 figures; Minor revisions in response to referee comments and corrected typos

Journal ref: Phys. Rev. A 105, 023310 (2022)

Measurement of scintillation response of CsI[Na] to low-energy nuclear recoils by COHERENT

Authors: D. Akimov, P. An, C. Awe, P. S. Barbeau, B. Becker, V. Belov, I. Bernardi, M. A. Blackston, C. Bock, A. Bolozdynya, J. Browning, B. Cabrera-Palmer, D. Chernyak, E. Conley, J. Daughhetee, J. Detwiler, K. Ding, M. R. Durand, Y. Efremenko, S. R. Elliott, L. Fabris, M. Febbraro, A. Gallo Rosso, A. Galindo-Uribarri, M. P. Green , et al. (52 additional authors not shown)

Abstract: We present results of several measurements of CsI[Na] scintillation response to 3-60 keV energy nuclear recoils performed by the COHERENT collaboration using tagged neutron elastic scattering experiments and an endpoint technique. Earlier results, used to estimate the coherent elastic neutrino-nucleus scattering (CEvNS) event rate for the first observation of this process achieved by COHERENT at t… ▽ More We present results of several measurements of CsI[Na] scintillation response to 3-60 keV energy nuclear recoils performed by the COHERENT collaboration using tagged neutron elastic scattering experiments and an endpoint technique. Earlier results, used to estimate the coherent elastic neutrino-nucleus scattering (CEvNS) event rate for the first observation of this process achieved by COHERENT at the Spallation Neutron Source (SNS), have been reassessed. We discuss corrections for the identified systematic effects and update the respective uncertainty values. The impact of updated results on future precision tests of CEvNS is estimated. We scrutinize potential systematic effects that could affect each measurement. In particular we confirm the response of the H11934-200 Hamamatsu photomultiplier tube (PMT) used for the measurements presented in this study to be linear in the relevant signal scale region. △ Less

Submitted 6 October, 2022; v1 submitted 3 November, 2021; originally announced November 2021.

Comments: The version accepted by JINST. The changes made as a result of the peer review process: 1. Section 8 "Global CsI[Na] QF data fit" is expanded. The main fit result and its uncertainty is NOT CHANGED. An alternative fit is now shown in Figure 14, Figure 15 is added to further validate the assumptions in the main fit. 2. The Appendix B is restructured for clarity

Semi-empirical Quantum Optics for Mid-Infrared Molecular Nanophotonics

Authors: Johan F. Triana, Mauricio Arias, Jun Nishida, Eric Muller, Roland Wilcken, Samuel C. Johnson, Aldo Delgado, Markus B. Raschke, Felipe Herrera

Abstract: Nanoscale infrared (IR) resonators with sub-diffraction limited mode volumes and open geometries have emerged as new platforms for implementing cavity quantum electrodynamics (QED) at room temperature. The use of infrared (IR) nano-antennas and tip nanoprobes to study strong light-matter coupling of molecular vibrations with the vacuum field can be exploited for IR quantum control with nanometer a… ▽ More Nanoscale infrared (IR) resonators with sub-diffraction limited mode volumes and open geometries have emerged as new platforms for implementing cavity quantum electrodynamics (QED) at room temperature. The use of infrared (IR) nano-antennas and tip nanoprobes to study strong light-matter coupling of molecular vibrations with the vacuum field can be exploited for IR quantum control with nanometer and femtosecond resolution. In order to accelerate the development of molecule-based quantum nano-photonic devices in the mid-IR, we develop a generally applicable semi-empirical quantum optics approach to describe light-matter interaction in systems driven by mid-IR femtosecond laser pulses. The theory is shown to reproduce recent experiments on the acceleration of the vibrational relaxation rate in infrared nanostructures, and also provide physical insights for the implementation of coherent phase rotations of the near-field using broadband nanotips. We then apply the quantum framework to develop general tip-design rules for the experimental manipulation of vibrational strong coupling and Fano interference effects in open infrared resonators. We finally propose the possibility of transferring the natural anharmonicity of molecular vibrational levels to the resonator near-field in the weak coupling regime, to implement intensity-dependent phase shifts of the coupled system response with strong pulses. Our semi-empirical quantum theory is equivalent to first-principles techniques based on Maxwell's equations, but its lower computational cost suggests its use a rapid design tool for the development of strongly-coupled infrared nanophotonic hardware for applications ranging from quantum control of materials to quantum information processing. △ Less

Submitted 14 October, 2021; originally announced October 2021.

Comments: 18 pages, 7 figures

Journal ref: J. Chem. Phys. 156, 124110, 2022

Density-Matrix Renormalization Group for Continuous Quantum Systems

Authors: Shovan Dutta, Anton Buyskikh, Andrew J. Daley, Erich J. Mueller

Abstract: We introduce a versatile and practical framework for applying matrix product state techniques to continuous quantum systems. We divide space into multiple segments and generate continuous basis functions for the many-body state in each segment. By combining this mapping with existing numerical Density-Matrix Renormalization Group routines, we show how one can accurately obtain the ground-state wav… ▽ More We introduce a versatile and practical framework for applying matrix product state techniques to continuous quantum systems. We divide space into multiple segments and generate continuous basis functions for the many-body state in each segment. By combining this mapping with existing numerical Density-Matrix Renormalization Group routines, we show how one can accurately obtain the ground-state wave function, spatial correlations, and spatial entanglement entropy directly in the continuum. For a prototypical mesoscopic system of strongly-interacting bosons we demonstrate faster convergence than standard grid-based discretization. We illustrate the power of our approach by studying a superfluid-insulator transition in an external potential. We outline how one can directly apply or generalize this technique to a wide variety of experimentally relevant problems across condensed matter physics and quantum field theory. △ Less

Submitted 11 August, 2021; originally announced August 2021.

Comments: Main paper: 7 pages, 5 figures; Supplement: 13 pages, 5 figures

Journal ref: Phys. Rev. Lett. 128, 230401 (2022)

PROSPECT-II Physics Opportunities

Authors: M. Andriamirado, A. B. Balantekin, H. R. Band, C. D. Bass, D. E. Bergeron, N. S. Bowden, C. D. Bryan, R. Carr, T. Classen, A. J. Conant, G. Deichert, A. Delgado, M. V. Diwan, M. J. Dolinski, A. Erickson, B. T. Foust, J. K. Gaison, A. Galindo-Uribari, C. E. Gilbert, C. Grant, S. Hans, A. B. Hansell, K. M. Heeger, B. Heffron, D. E. Jaffe , et al. (37 additional authors not shown)

Abstract: The Precision Reactor Oscillation and Spectrum Experiment, PROSPECT, has made world-leading measurements of reactor antineutrinos at short baselines. In its first phase, conducted at the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory, PROSPECT produced some of the strongest limits on eV-scale sterile neutrinos, made a precision measurement of the reactor antineutrino spectrum fr… ▽ More The Precision Reactor Oscillation and Spectrum Experiment, PROSPECT, has made world-leading measurements of reactor antineutrinos at short baselines. In its first phase, conducted at the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory, PROSPECT produced some of the strongest limits on eV-scale sterile neutrinos, made a precision measurement of the reactor antineutrino spectrum from $^{235}$U, and demonstrated the observation of reactor antineutrinos in an aboveground detector with good energy resolution and well-controlled backgrounds. The PROSPECT collaboration is now preparing an upgraded detector, PROSPECT-II, to probe yet unexplored parameter space for sterile neutrinos and contribute to a full resolution of the Reactor Antineutrino Anomaly, a longstanding puzzle in neutrino physics. By pressing forward on the world's most precise measurement of the $^{235}$U antineutrino spectrum and measuring the absolute flux of antineutrinos from $^{235}$U, PROSPECT-II will sharpen a tool with potential value for basic neutrino science, nuclear data validation, and nuclear security applications. Following a two-year deployment at HFIR, an additional PROSPECT-II deployment at a low enriched uranium reactor could make complementary measurements of the neutrino yield from other fission isotopes. PROSPECT-II provides a unique opportunity to continue the study of reactor antineutrinos at short baselines, taking advantage of demonstrated elements of the original PROSPECT design and close access to a highly enriched uranium reactor core. △ Less

Submitted 3 September, 2022; v1 submitted 8 July, 2021; originally announced July 2021.

Journal ref: J. Phys. G: Nucl. Part. Phys. 49, 070501 (2022)

Primordial non-Gaussianity from the Completed SDSS-IV extended Baryon Oscillation Spectroscopic Survey I: Catalogue Preparation and Systematic Mitigation

Authors: Mehdi Rezaie, Ashley J. Ross, Hee-Jong Seo, Eva-Maria Mueller, Will J. Percival, Grant Merz, Reza Katebi, Razvan C. Bunescu, Julian Bautista, Joel R. Brownstein, Etienne Burtin, Kyle Dawson, Héctor Gil-Marín, Jiamin Hou, Eleanor B. Lyke, Axel de la Macorra, Graziano Rossi, Donald P. Schneider, Pauline Zarrouk, Gong-Bo Zhao

Abstract: We investigate the large-scale clustering of the final spectroscopic sample of quasars from the recently completed extended Baryon Oscillation Spectroscopic Survey (eBOSS). The sample contains $343708$ objects in the redshift range $0.8<z<2.2$ and $72667$ objects with redshifts $2.2<z<3.5$, covering an effective area of $4699~{\rm deg}^{2}$. We develop a neural network-based approach to mitigate s… ▽ More We investigate the large-scale clustering of the final spectroscopic sample of quasars from the recently completed extended Baryon Oscillation Spectroscopic Survey (eBOSS). The sample contains $343708$ objects in the redshift range $0.8<z<2.2$ and $72667$ objects with redshifts $2.2<z<3.5$, covering an effective area of $4699~{\rm deg}^{2}$. We develop a neural network-based approach to mitigate spurious fluctuations in the density field caused by spatial variations in the quality of the imaging data used to select targets for follow-up spectroscopy. Simulations are used with the same angular and radial distributions as the real data to estimate covariance matrices, perform error analyses, and assess residual systematic uncertainties. We measure the mean density contrast and cross-correlations of the eBOSS quasars against maps of potential sources of imaging systematics to address algorithm effectiveness, finding that the neural network-based approach outperforms standard linear regression. Stellar density is one of the most important sources of spurious fluctuations, and a new template constructed using data from the Gaia spacecraft provides the best match to the observed quasar clustering. The end-product from this work is a new value-added quasar catalogue with the improved weights to correct for nonlinear imaging systematic effects, which will be made public. Our quasar catalogue is used to measure the local-type primordial non-Gaussianity in our companion paper, Mueller et al. in preparation. △ Less

Submitted 25 June, 2021; originally announced June 2021.

Comments: 17 pages, 13 figures, 2 tables. Accepted for publication in MNRAS. For the associated code and value-added catalogs see https://github.com/mehdirezaie/sysnetdev and https://github.com/mehdirezaie/eBOSSDR16QSOE

Machine learning potentials for complex aqueous systems made simple

Authors: Christoph Schran, Fabian L. Thiemann, Patrick Rowe, Erich A. Müller, Ondrej Marsalek, Angelos Michaelides

Abstract: Simulation techniques based on accurate and efficient representations of potential energy surfaces are urgently needed for the understanding of complex aqueous systems such as solid-liquid interfaces. Here, we present a machine learning framework that enables the efficient development and validation of models for complex aqueous systems. Instead of trying to deliver a globally-optimal machine lear… ▽ More Simulation techniques based on accurate and efficient representations of potential energy surfaces are urgently needed for the understanding of complex aqueous systems such as solid-liquid interfaces. Here, we present a machine learning framework that enables the efficient development and validation of models for complex aqueous systems. Instead of trying to deliver a globally-optimal machine learning potential, we propose to develop models applicable to specific thermodynamic state points in a simple and user-friendly process. After an initial ab initio simulation, a machine learning potential is constructed with minimum human effort through a data-driven active learning protocol. Such models can afterwards be applied in exhaustive simulations to provide reliable answers for the scientific question at hand. We showcase this methodology on a diverse set of aqueous systems with increasing degrees of complexity. The systems chosen here comprise bulk water with different ions in solution, water on a titanium dioxide surface, as well as water confined in nanotubes and between molybdenum disulfide sheets. Highlighting the accuracy of our approach with respect to the underlying ab initio reference, the resulting models are evaluated in detail with an automated validation protocol that includes structural and dynamical properties and the precision of the force prediction of the models. Finally, we demonstrate the capabilities of our approach for the description of water on the rutile titanium dioxide (110) surface to analyze the structure and mobility of water on this surface. Such machine learning models provide a straightforward and uncomplicated but accurate extension of simulation time and length scales for complex systems. △ Less

Submitted 14 September, 2021; v1 submitted 31 May, 2021; originally announced June 2021.

Journal ref: PNAS September 21, 2021 118 (38) e2110077118

A D$_{2}$O detector for flux normalization of a pion decay-at-rest neutrino source

Authors: COHERENT Collaboration, D. Akimov, P. An, C. Awe, P. S. Barbeau, B. Becker, V. Belov, I. Bernardi, M. A. Blackston, L. Blokland, A. Bolozdynya, B. Cabrera-Palmer, D. Chernyak, E. Conley, J. Daughhetee, E. Day, J. Detwiler, K. Ding, M. R. Durand, Y. Efremenko, S. R. Elliott, L. Fabris, M. Febbraro, A. Gallo Rosso, A. Galindo-Uribarri , et al. (54 additional authors not shown)

Abstract: We report on the technical design and expected performance of a 592 kg heavy-water-Cherenkov detector to measure the absolute neutrino flux from the pion-decay-at-rest neutrino source at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL). The detector will be located roughly 20 m from the SNS target and will measure the neutrino flux with better than 5% statistical uncerta… ▽ More We report on the technical design and expected performance of a 592 kg heavy-water-Cherenkov detector to measure the absolute neutrino flux from the pion-decay-at-rest neutrino source at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL). The detector will be located roughly 20 m from the SNS target and will measure the neutrino flux with better than 5% statistical uncertainty in 2 years. This heavy-water detector will serve as the first module of a two-module detector system to ultimately measure the neutrino flux to 2-3% at both the First Target Station and the planned Second Target Station of the SNS. This detector will significantly reduce a dominant systematic uncertainty for neutrino cross-section measurements at the SNS, increasing the sensitivity of searches for new physics. △ Less

Submitted 25 August, 2021; v1 submitted 19 April, 2021; originally announced April 2021.

Comments: As accepted to JINST

Journal ref: JINST 16 (2021) 08, P08048

ReaxFF Reactive Force Field Development for Cu/Si Systems and application to Copper Cluster Formation During Cu Diffusion Inside Silicon

Authors: Kamyar Akbari Roshan, Mahdi Khajeh Talkhoncheh, Jonathan E. Mueller, William A. Goddard III, Adri C. T. van Duin

Abstract: Transition metal impurities such as nickel, copper, and iron, in solid-state materials like silicon have a significant impact on the electrical performance of integrated circuits and solar cells. To study the impact of copper impurities inside bulk silicon on the electrical properties of the material, one needs to understand the configurational space of copper atoms incorporated inside the silicon… ▽ More Transition metal impurities such as nickel, copper, and iron, in solid-state materials like silicon have a significant impact on the electrical performance of integrated circuits and solar cells. To study the impact of copper impurities inside bulk silicon on the electrical properties of the material, one needs to understand the configurational space of copper atoms incorporated inside the silicon lattice. In this work, we performed ReaxFF reactive force field based molecular dynamics simulations, studying different configurations of individual and crystalline copper atoms inside bulk silicon by looking at the diffusional behavior of copper in silicon. The ReaxFF Cu/Si parameter set was developed by training against DFT data, including the energy barrier for an individual Cu-atom inside a silicon lattice. We found that the diffusion of copper atoms has a direct relationship with the temperature. Moreover, it is also shown that individual copper atoms start to clusterize inside bulk silicon at elevated temperatures. Our simulation results provide a comprehensive picture of the effects of temperature and copper concentration on the crystallization of individual copper inside silicon lattice. Finally, the stress-strain relationship of Cu/Si compounds under uniaxial tensile loading have been obtained. Our results indicate a decrease in the elastic modulus with increasing level of Cu-impurity concentration. We observe spontaneous microcracking of the Si during the stress-strain tests as a consequence of the formation of a small Cu clusters adjacent to the Si surface. △ Less

Submitted 1 February, 2021; originally announced February 2021.

Comments: 29 pages, 13 figures

MSC Class: H.1

Driven-dissipative control of cold atoms in tilted optical lattices

Authors: Vaibhav Sharma, Erich J Mueller

Abstract: We present a sequence of driven-dissipative protocols for controlling cold atoms in tilted optical lattices. These experimentally accessible examples are templates that demonstrate how dissipation can be used to manipulate quantum many-body systems. We consider bosonic atoms trapped in a tilted optical lattice, immersed in a superfluid bath, and excited by coherent Raman lasers. With these ingredi… ▽ More We present a sequence of driven-dissipative protocols for controlling cold atoms in tilted optical lattices. These experimentally accessible examples are templates that demonstrate how dissipation can be used to manipulate quantum many-body systems. We consider bosonic atoms trapped in a tilted optical lattice, immersed in a superfluid bath, and excited by coherent Raman lasers. With these ingredients, we are able to controllably transport atoms in the lattice and produce self-healing quantum states: a Mott insulator and the topologically ordered spin-1 AKLT state. △ Less

Submitted 19 April, 2021; v1 submitted 2 January, 2021; originally announced January 2021.

Comments: Published version after response to referee comments

Journal ref: Phys. Rev. A 103, 043322 (2021)

Detector Systems Engineering for Extremely Large Instruments

Authors: Elizabeth M. George, Naidu Bezawada, Derek Ives, Leander Mehrgan, Matteo Accardo, Domingo Alvarez, Martin Brinkmann, Ralf Conzelmann, Claudio Cumani, Mark Downing, Max Engelhardt, Marcus Haug, Joshua Hopgood, Christoph Geimer, Olaf Iwert, Barbara Klein, Christopher Mandla, Eric Müller, Suzanne Ramsay, Javier Reyes, Mathias Richerzhagen, Benoît Serra, Matthias Seidel, Jörg Stegmeier, Mirko Todorovic

Abstract: The scientific detector systems for the ESO ELT first-light instruments, HARMONI, MICADO, and METIS, together will require 27 science detectors: seventeen 2.5 $μ$m cutoff H4RG-15 detectors, four 4K x 4K 231-84 CCDs, five 5.3 $μ$m cutoff H2RG detectors, and one 13.5 $μ$m cutoff GEOSNAP detector. This challenging program of scientific detector system development covers everything from designing and… ▽ More The scientific detector systems for the ESO ELT first-light instruments, HARMONI, MICADO, and METIS, together will require 27 science detectors: seventeen 2.5 $μ$m cutoff H4RG-15 detectors, four 4K x 4K 231-84 CCDs, five 5.3 $μ$m cutoff H2RG detectors, and one 13.5 $μ$m cutoff GEOSNAP detector. This challenging program of scientific detector system development covers everything from designing and producing state-of-the-art detector control and readout electronics, to developing new detector characterization techniques in the lab, to performance modeling and final system verification. We report briefly on the current design of these detector systems and developments underway to meet the challenging scientific performance goals of the ELT instruments. △ Less

Submitted 15 December, 2020; originally announced December 2020.

Comments: Proceedings of the SPIE Astronomical Telescopes and Instrumentation Conference 2020

Journal ref: Proc. SPIE 11454, X-Ray, Optical, and Infrared Detectors for Astronomy IX, 114541Y (13 December 2020)

Calibrating Core Overshooting Parameters With Two-dimensional Hydrodynamical Simulations

Authors: Johann Higl, Ewald Mueller, Achim Weiss

Abstract: The extent of mixed regions around convective zones is one of the biggest uncertainties in stellar evolution. 1D overshooting descriptions introduce a free parameter ($f_{ov}$) that is in general not well constrained from observations. Especially in small central convective regions the value is highly uncertain due to its tight connection to the pressure scale height. Long-term multi-dimensional h… ▽ More The extent of mixed regions around convective zones is one of the biggest uncertainties in stellar evolution. 1D overshooting descriptions introduce a free parameter ($f_{ov}$) that is in general not well constrained from observations. Especially in small central convective regions the value is highly uncertain due to its tight connection to the pressure scale height. Long-term multi-dimensional hydrodynamic simulations can be used to study the size of the overshooting region and the involved mixing processes. Here we show how one can calibrate an overshooting parameter by performing 2D Maestro simulations of Zero-Age-Main-Sequence stars ranging from $1.3$ to $3.5 M_\odot$. The simulations cover the convective cores of the stars and a large fraction of the surrounding radiative envelope. We follow the convective flow for at least 20 convective turnover times, while the longest simulation covers 430 turnover time scales. This allows us to study how the mixing as well as the convective boundary evolve with time, and how the resulting entrainment can be interpreted in terms of overshooting parameters. We find that increasing the overshooting parameter $f_{ov}$ beyond a certain value in the initial model of our simulations, changes the mixing behaviour completely. This result can be used to put limits on the overshooting parameter. We find $0.010 < f_{ov} < 0.017$ to be in good agreement with our simulations of a $3.5 M_\odot$ mass star. We also identify a diffusive mixing component due to internal gravity waves (IGW) that is active throughout the convectively stable layer, but likely overestimated in our simulations. Furthermore, applying our calibration method to simulations of less massive stars suggests a need for a mass-dependent overshooting description where the mixing in terms of the pressure scale height is reduced for small convective cores. △ Less

Submitted 9 December, 2020; originally announced December 2020.

Comments: Accepted for publication in A&A

Journal ref: A&A 646, A133 (2021)

Development of a $^{83\mathrm{m}}$Kr source for the calibration of the CENNS-10 Liquid Argon Detector

Authors: COHERENT Collaboration, D. Akimov, P. An, C. Awe, P. S. Barbeau, B. Becker, V. Belov, I. Bernardi, M. A. Blackston, L. Blokland, A. Bolozdynya, B. Cabrera-Palmer, N. Chen, D. Chernyak, E. Conley, J. Daughhetee, M. del Valle Coello, J. A. Detwiler, M. R. Durand, Y. Efremenko, S. R. Elliott, L. Fabris, M. Febbraro, W. Fox, A. Galindo-Uribarri , et al. (55 additional authors not shown)

Abstract: We report on the preparation of and calibration measurements with a $^{83\mathrm{m}}$Kr source for the CENNS-10 liquid argon detector. $^{83\mathrm{m}}$Kr atoms generated in the decay of a $^{83}$Rb source were introduced into the detector via injection into the Ar circulation loop. Scintillation light arising from the 9.4 keV and 32.1 keV conversion electrons in the decay of $^{83\mathrm{m}}$Kr i… ▽ More We report on the preparation of and calibration measurements with a $^{83\mathrm{m}}$Kr source for the CENNS-10 liquid argon detector. $^{83\mathrm{m}}$Kr atoms generated in the decay of a $^{83}$Rb source were introduced into the detector via injection into the Ar circulation loop. Scintillation light arising from the 9.4 keV and 32.1 keV conversion electrons in the decay of $^{83\mathrm{m}}$Kr in the detector volume were then observed. This calibration source allows the characterization of the low-energy response of the CENNS-10 detector and is applicable to other low-energy-threshold detectors. The energy resolution of the detector was measured to be 9$\%$ at the total $^{83\mathrm{m}}$Kr decay energy of 41.5 keV. We performed an analysis to separately calibrate the detector using the two conversion electrons at 9.4 keV and 32.1 keV △ Less

Submitted 27 January, 2021; v1 submitted 21 October, 2020; originally announced October 2020.

Comments: v2: As accepted to JINST

Journal ref: JINST 16 P04002 (2021)

Multilevel Monte Carlo for quantum mechanics on a lattice

Authors: Karl Jansen, Eike Hermann Müller, Robert Scheichl

Abstract: Monte Carlo simulations of quantum field theories on a lattice become increasingly expensive as the continuum limit is approached since the cost per independent sample grows with a high power of the inverse lattice spacing. Simulations on fine lattices suffer from critical slowdown, the rapid growth of autocorrelations in the Markov chain. This causes a strong increase in the number of lattice con… ▽ More Monte Carlo simulations of quantum field theories on a lattice become increasingly expensive as the continuum limit is approached since the cost per independent sample grows with a high power of the inverse lattice spacing. Simulations on fine lattices suffer from critical slowdown, the rapid growth of autocorrelations in the Markov chain. This causes a strong increase in the number of lattice configurations that have to be generated to obtain statistically significant results. This paper discusses hierarchical sampling methods to tame the growth in autocorrelations. Combined with multilevel variance reduction, this significantly reduces the computational cost of simulations for given tolerances $ε_{\text{disc}}$ on the discretisation error and $ε_{\text{stat}}$ on the statistical error. For observables with lattice errors of order $α$ and integrated autocorrelation times that grow like $τ_{\mathrm{int}}\propto a^{-z}$, multilevel Monte Carlo (MLMC) reduces the cost from $\mathcal{O}(ε_{\text{stat}}^{-2}ε_{\text{disc}}^{-(1+z)/α})$ to $\mathcal{O}(ε_{\text{stat}}^{-2}\vert\log ε_{\text{disc}} \vert^2+ε_{\text{disc}}^{-1/α})$ or $\mathcal{O}(ε_{\text{stat}}^{-2}+ε_{\text{disc}}^{-1/α})$. Higher gains are expected for simulations of quantum field theories in $D$ dimensions. The efficiency of the approach is demonstrated on two model systems, including a topological oscillator that is badly affected by critical slowdown from topological charge freezing. On fine lattices, the new methods are orders of magnitude faster than standard Hybrid Monte Carlo sampling. For high resolutions, MLMC can be used to accelerate even the cluster algorithm for the topological oscillator. Performance is further improved through perturbative matching which guarantees efficient coupling of theories on the multilevel hierarchy. △ Less

Submitted 17 November, 2020; v1 submitted 7 August, 2020; originally announced August 2020.

Comments: 23 pages, 17 figures, 5 tables

MSC Class: 81-08; 81T25; 65Y20; 60J22 ACM Class: F.2; J.2

Journal ref: Phys. Rev. D 102, 114512 (2020)

Generating a Machine-learned Equation of State for Fluid Properties

Authors: Kezheng Zhu, Erich A. Müller

Abstract: Equations of State (EoS) for fluids have been a staple of engineering design and practice for over a century. Available EoS are based on the fitting of a closed-form analytical expression to suitable experimental data. The underlying mathematical structure and the underlying physical model significantly restrain the applicability and accuracy of the resulting EoS. This contribution explores the is… ▽ More Equations of State (EoS) for fluids have been a staple of engineering design and practice for over a century. Available EoS are based on the fitting of a closed-form analytical expression to suitable experimental data. The underlying mathematical structure and the underlying physical model significantly restrain the applicability and accuracy of the resulting EoS. This contribution explores the issues surrounding the substitution of analytical EoS for machine-learned models, in particular, we describe, as a proof of concept, the effectiveness of a machine-learned model to replicate statistical associating fluid theory (SAFT-VR-Mie) EoS for pure fluids. By utilizing Artificial Neural Network and Gaussian Process Regression, predictions of thermodynamic properties such as critical pressure and temperature, vapor pressures and densities of pure model fluids are performed based on molecular descriptors. To quantify the effectiveness of the Machine Learning techniques, a large data set is constructed using the comparisons between the Machine-Learned EoS and the surrogate data set suggest that the proposed approach shows promise as a viable technique for the correlation, extrapolation and prediction of thermophysical properties of fluids. △ Less

Submitted 29 July, 2020; originally announced July 2020.

Comments: Submitted to J. Phys. Chem. B

Parallel Performance of ARM ThunderX2 for Atomistic Simulation Algorithms

Authors: William Robert Saunders, James Grant, Eike Hermann Müller

Abstract: Atomistic simulation drives scientific advances in modern material science and accounts for a significant proportion of wall time on High Performance Computing facilities. It is important that algorithms are efficient and implementations are performant in a continuously diversifying hardware landscape. Furthermore, they have to be portable to make best use of the available computing resource. In… ▽ More Atomistic simulation drives scientific advances in modern material science and accounts for a significant proportion of wall time on High Performance Computing facilities. It is important that algorithms are efficient and implementations are performant in a continuously diversifying hardware landscape. Furthermore, they have to be portable to make best use of the available computing resource. In this paper we assess the parallel performance of some key algorithms implemented in a performance portable framework developed by us. We consider Molecular Dynamics with short range interactions, the Fast Multipole Method and Kinetic Monte Carlo. To assess the performance of emerging architectures, we compare the Marvell ThunderX2 (ARM) architecture to traditional x86_64 hardware made available through the Azure cloud computing service. △ Less

Submitted 20 July, 2020; originally announced July 2020.

Comments: 10 pages, 3 figures, 1 tables; submitted to EAHPC-2020 (Embracing Arm: a journey of porting and optimization to the latest Arm-based processors 2020)

A new algorithm for electrostatic interactions in Monte Carlo simulations of charged particles

Authors: William Robert Saunders, James Grant, Eike Hermann Müller

Abstract: To minimise systematic errors in Monte Carlo simulations of charged particles, long range electrostatic interactions have to be calculated accurately and efficiently. Standard approaches, such as Ewald summation or the naive application of the classical Fast Multipole Method, result in a cost per Metropolis-Hastings step which grows in proportion to some positive power of the number of particles… ▽ More To minimise systematic errors in Monte Carlo simulations of charged particles, long range electrostatic interactions have to be calculated accurately and efficiently. Standard approaches, such as Ewald summation or the naive application of the classical Fast Multipole Method, result in a cost per Metropolis-Hastings step which grows in proportion to some positive power of the number of particles $N$ in the system. This prohibitively large cost prevents accurate simulations of systems with a sizeable number of particles. Currently, large systems are often simulated by truncating the Coulomb potential which introduces uncontrollable systematic errors. In this paper we present a new multilevel method which reduces the computational complexity to $\mathcal{O}(\log(N))$ per Metropolis-Hastings step, while maintaining errors which are comparable to direct Ewald summation. We show that compared to related previous work, our approach reduces the overall cost by better balancing time spent in the proposal- and acceptance- stages of each Metropolis-Hastings step. By simulating large systems with up to $N=10^5$ particles we demonstrate that our implementation is competitive with state-of-the-art MC packages and allows the simulation of very large systems of charged particles with accurate electrostatics. △ Less

Submitted 4 January, 2021; v1 submitted 30 June, 2020; originally announced June 2020.

Comments: 19 pages, 9 figures, 1 table

MSC Class: 78M16; 82C80; 65Y20 ACM Class: J.2; F.2.1; G.1

Neutron flux and spectrum in the Dresden Felsenkeller underground facility studied by moderated $^3$He counters

Authors: M. Grieger, T. Hensel, J. Agramunt, D. Bemmerer, D. Degering, I. Dillmann, L. M. Fraile, D. Jordan, U. Köster, M. Marta, S. E. Müller, T. Szücs, J. L. Taín, K. Zuber

Abstract: Ambient neutrons may cause significant background for underground experiments. Therefore, it is necessary to investigate their flux and energy spectrum in order to devise a proper shielding. Here, two sets of altogether ten moderated $^3$He neutron counters are used for a detailed study of the ambient neutron background in tunnel IV of the Felsenkeller facility, underground below 45 meters of rock… ▽ More Ambient neutrons may cause significant background for underground experiments. Therefore, it is necessary to investigate their flux and energy spectrum in order to devise a proper shielding. Here, two sets of altogether ten moderated $^3$He neutron counters are used for a detailed study of the ambient neutron background in tunnel IV of the Felsenkeller facility, underground below 45 meters of rock in Dresden/Germany. One of the moderators is lined with lead and thus sensitive to neutrons of energies higher than 10 MeV. For each $^3$He counter-moderator assembly, the energy dependent neutron sensitivity was calculated with the FLUKA code. The count rates of the ten detectors were then fitted with the MAXED and GRAVEL packages. As a result, both the neutron energy spectrum from 10$^{-9}$ MeV to 300 MeV and the flux integrated over the same energy range were determined experimentally. The data show that at a given depth, both the flux and the spectrum vary significantly depending on local conditions. Energy integrated fluxes of $(0.61 \pm 0.05)$, $(1.96 \pm 0.15)$, and $(4.6 \pm 0.4) \times 10^{-4}$ cm$^{-2}$ s$^{-1}$, respectively, are measured for three sites within Felsenkeller tunnel IV which have similar muon flux but different shielding wall configurations. The integrated neutron flux data and the obtained spectra for the three sites are matched reasonably well by FLUKA Monte Carlo calculations that are based on the known muon flux and composition of the measurement room walls. △ Less

Submitted 19 June, 2020; v1 submitted 4 June, 2020; originally announced June 2020.

Comments: 10 figures, 4 tables; to be published in Phys. Rev. D

Journal ref: Phys. Rev. D 101, 123027 (2020)

The n$^3$He Experiment: Parity Violation in Polarized Neutron Capture on $^{3}$He

Authors: n3He Collaboration, M. McCrea, M. L. Kabir, N. Birge, C. E. Coppola, C. Hayes, E. Plemons, A. Ramírez-Morales, E. M. Scott, J. Watts, S. Baessler, L. Barrón-Palos, J. D. Bowman, C. Britton Jr., J. Calarco, V. Cianciolo, C. B. Crawford, D. Ezell, N. Fomin, I. Garishvili, M. T. Gericke, G. L. Greene, G. M. Hale, J. Hamblen, E. Iverson , et al. (4 additional authors not shown)

Abstract: Significant progress has been made to experimentally determine a complete set of the parity-violating (PV) weak-interaction amplitudes between nucleons. In this paper we describe the design, construction and operation of the n$^3$He experiment that was used to measure the PV asymmetry $A_{\mathrm{PV}}$ in the direction of proton emission in the reaction… ▽ More Significant progress has been made to experimentally determine a complete set of the parity-violating (PV) weak-interaction amplitudes between nucleons. In this paper we describe the design, construction and operation of the n$^3$He experiment that was used to measure the PV asymmetry $A_{\mathrm{PV}}$ in the direction of proton emission in the reaction $\vec{\mathrm{n}} + {^3}\mathrm{He} \rightarrow {^3}\mathrm{H} + \mathrm{p}$, using the capture of polarized cold neutrons in an unpolarized gaseous $^3\mathrm{He}$ target. This asymmetry has was recently calculated \cite{Viviani,Viviani2}, both in the traditional style meson exchange picture, and in effective field theory (EFT), including two-pion exchange. The high precision result (published separately) obtained with the experiment described herein forms an important benchmark for hadronic PV (HPV) theory in few-body systems, where precise calculations are possible. To this day, HPV is still one of the most poorly understood aspects of the electro-weak theory. The calculations estimate the size of the asymmetry to be in the range of $(-9.4 \rightarrow 3.5)\times 10^{-8}$, depending on the framework or model. The small size of the asymmetry and the small overall goal uncertainty of the experiment of $δA_{\mathrm{PV}} \simeq 1\times10^{-8}$ places strict requirements on the experiment, especially on the design of the target-detector chamber. In this paper we describe the experimental setup and the measurement methodology as well as the detailed design of the chamber, including results of Garfield++ and Geant4 simulations that form the basis of the chamber design and analysis. We also show data from commissioning and production and define the systematic errors that the chamber contributes to the measured $A_{\mathrm{PV}}$. We give the final uncertainty on the measurement. △ Less

Submitted 22 April, 2020; originally announced April 2020.

Multigrid preconditioners for the hybridized Discontinuous Galerkin discretisation of the shallow water equations

Authors: Jack D. Betteridge, Thomas H. Gibson, Ivan G. Graham, Eike H. Müller

Abstract: Numerical climate- and weather-prediction requires the fast solution of the equations of fluid dynamics. Discontinuous Galerkin (DG) discretisations have several advantageous properties. They can be used for arbitrary domains and support a structured data layout, which is important on modern chip architectures. For smooth solutions, higher order approximations can be particularly efficient since e… ▽ More Numerical climate- and weather-prediction requires the fast solution of the equations of fluid dynamics. Discontinuous Galerkin (DG) discretisations have several advantageous properties. They can be used for arbitrary domains and support a structured data layout, which is important on modern chip architectures. For smooth solutions, higher order approximations can be particularly efficient since errors decrease exponentially in the polynomial degree. Due to the wide separation of timescales in atmospheric dynamics, semi-implicit time integrators are highly efficient, since the implicit treatment of fast waves avoids tight constraints on the time step size, and can therefore improve overall efficiency. However, if implicit-explicit (IMEX) integrators are used, a large linear system of equations has to be solved in every time step. A particular problem for DG discretisations of velocity-pressure systems is that the normal Schur-complement reduction to an elliptic system for the pressure is not possible since the numerical fluxes introduce artificial diffusion terms. For the shallow water equations, which form an important model system, hybridised DG methods have been shown to overcome this issue. However, no attention has been paid to the efficient solution of the resulting linear system of equations. In this paper we address this issue and show that the elliptic system for the flux unknowns can be solved efficiently with a non-nested multigrid algorithm. The method is implemented in the Firedrake library and we demonstrate the excellent performance of the algorithm both for an idealised stationary flow problem in a flat domain and for non-stationary setups in spherical geometry from the Williamson et al. testsuite. In the latter case the performance of our bespoke multigrid preconditioner (although itself not highly optimised) is comparable to that of a highly optimised direct solver. △ Less

Submitted 12 October, 2020; v1 submitted 20 April, 2020; originally announced April 2020.

Comments: 41 pages, 16 figures, 13 tables

MSC Class: 65F08; 65M60; 65N55; 76M10; 86A10 ACM Class: G.1.3; G.1.8; J.2

Electrically-driven Acousto-optics and Broadband Non-reciprocity in Silicon Photonics

Authors: Eric A. Kittlaus, William M. Jones, Peter T. Rakich, Nils T. Otterstrom, Richard E. Muller, Mina Rais-Zadeh

Abstract: Emerging technologies based on tailorable interactions between photons and phonons promise new capabilities ranging from high-fidelity microwave signal processing to non-reciprocal optics and quantum state control. While such light-sound couplings have been studied in a variety of physical systems, many implementations rely on non-standard materials and fabrication schemes that are challenging to… ▽ More Emerging technologies based on tailorable interactions between photons and phonons promise new capabilities ranging from high-fidelity microwave signal processing to non-reciprocal optics and quantum state control. While such light-sound couplings have been studied in a variety of physical systems, many implementations rely on non-standard materials and fabrication schemes that are challenging to co-implement with standard integrated photonic circuitry. Notably, despite significant advances in integrated electro-optic modulators, related acousto-optic modulator concepts have remained relatively unexplored in silicon photonics. In this article, we demonstrate direct acousto-optic modulation within silicon waveguides using electrically-driven surface acoustic waves (SAWs). By co-integrating SAW transducers in piezoelectric AlN with a standard silicon-on-insulator photonic platform, we harness silicon's strong elasto-optic effect to mediate linear light-sound coupling. Through lithographic design, acousto-optic phase and single-sideband amplitude modulators in the range of 1-5 GHz are fabricated, exhibiting index modulation strengths comparable to existing electro-optic technologies. Extending this traveling-wave, acousto-optic interaction to cm-scales, we create electrically-driven non-reciprocal modulators in silicon. Non-reciprocal operation bandwidths of >100 GHz and insertion losses <0.6 dB are achieved. Building on these results, we show that unity-efficiency non-reciprocal modulation, necessary for a robust acousto-optic isolator, is within reach. The acousto-optic modulator design is compatible with both CMOS fabrication and existing silicon photonic device technologies. These results represent a promising new approach to implement compact and scalable acousto-optic modulators, frequency-shifters, and non-magnetic optical isolators and circulators in integrated photonic circuits. △ Less

Submitted 2 April, 2020; originally announced April 2020.

Multigrid preconditioners for the mixed finite element dynamical core of the LFRic atmospheric model

Authors: Christopher Maynard, Thomas Melvin, Eike Hermann Müller

Abstract: Due to the wide separation of time scales in geophysical fluid dynamics, semi-implicit time integrators are commonly used in operational atmospheric forecast models. They guarantee the stable treatment of fast (acoustic and gravity) waves, while not suffering from severe restrictions on the timestep size. To propagate the state of the atmosphere forward in time, a non-linear equation for the progn… ▽ More Due to the wide separation of time scales in geophysical fluid dynamics, semi-implicit time integrators are commonly used in operational atmospheric forecast models. They guarantee the stable treatment of fast (acoustic and gravity) waves, while not suffering from severe restrictions on the timestep size. To propagate the state of the atmosphere forward in time, a non-linear equation for the prognostic variables has to be solved at every timestep. Since the nonlinearity is typically weak, this is done with a small number of Newton- or Picard- iterations, which in turn require the efficient solution of a large system on linear equations with $\mathcal{O}(10^6-10^9)$ unknowns. This linear solve is often the computationally most costly part of the model. In this paper an efficient linear solver for the LFRic next-generation model, currently developed by the Met Office, is described. The model uses an advanced mimetic finite element discretisation which makes the construction of efficient solvers challenging compared to models using standard finite-difference and finite-volume methods. The linear solver hinges on a bespoke multigrid preconditioner of the Schur-complement system for the pressure correction. By comparing to Krylov-subspace methods, the superior performance and robustness of the multigrid algorithm is demonstrated for standard test cases and realistic model setups. In production mode, the model will have to run in parallel on 100,000s of processing elements. As confirmed by numerical experiments, one particular advantage of the multigrid solver is its excellent parallel scalability due to avoiding expensive global reduction operations. △ Less

Submitted 21 July, 2020; v1 submitted 31 January, 2020; originally announced February 2020.

Comments: 22 pages, 6 figures, 5 tables, to appear in Quarterly Journal of the Royal Meteorological Society

MSC Class: 65F08; 65N55; 76M10; 86A10; 65Y05 ACM Class: G.1.3; G.1.8; J.2