-
Optimization and validation of charge transport simulation for hybrid pixel detectors incorporating the repulsion effect
Authors:
X. Xie,
A. Bergamaschi,
M. Brückner,
M. Carulla,
R. Dinapoli,
S. Ebner,
K. Ferjaoui,
A. Francesca Mazzoleni,
J. Franklin Mulvey,
V. Gautam,
D. Greiffenberg,
S. Hasanaj,
J. Heymes,
V. Hinger,
V. Kedych,
T. King,
S. Li,
C. Lopez-Cuenca,
D. Mezza,
K. Moustakas,
A. Mozzanica,
M. Müller,
K. A. Paton,
C. Ruder,
B. Schmitt
, et al. (5 additional authors not shown)
Abstract:
For emerging applications of hybrid pixel detectors which require high spatial resolution, e.g., subpixel interpolation in X-ray imaging and deep learning-based electron localization, accurate modeling of charge transport processes in the sensor is highly demanded. To address this, two open-source, time-stepping Monte Carlo simulation methods have been developed, both explicitly incorporating char…
▽ More
For emerging applications of hybrid pixel detectors which require high spatial resolution, e.g., subpixel interpolation in X-ray imaging and deep learning-based electron localization, accurate modeling of charge transport processes in the sensor is highly demanded. To address this, two open-source, time-stepping Monte Carlo simulation methods have been developed, both explicitly incorporating charge repulsion, which are found necessary for accurate simulation when charge sharing becomes important. The first method employs brute-force calculations accelerated by GPU computing to model charge carrier dynamics, including drift, diffusion, and repulsion. The second utilizes a simplified spherical model that significantly reduces computational complexity. A parameterization scheme of the charge transport behaviors has been developed to enable efficient and rapid generation of X-ray simulation events. Both methods were rigorously validated using experimental data collected with a monochromatic X-ray beam at the METROLOGIE beamline of the SOLEIL synchrotron, demonstrating excellent agreement with measured pixel-energy spectra across various sensor thicknesses, bias voltages, and photon energies. Furthermore, the impact of the repulsion effect on charge carrier distributions was quantitatively evaluated. The potential applications of these simulation methods for different particle detections and detector technologies are also discussed.
△ Less
Submitted 11 June, 2025;
originally announced June 2025.
-
X-ray Irradiation Studies on the Monopix DMAPS in 150$\,$nm and 180$\,$nm
Authors:
Christian Bespin,
Marlon Barbero,
Pierre Barrillon,
Patrick Breugnon,
Ivan Caicedo,
Yavuz Degerli,
Jochen Dingfelder,
Tomasz Hemperek,
Toko Hirono,
Hans Krüger,
Fabian Hügging,
Konstantinos Moustakas,
Patrick Pangaud,
Heinz Pernegger,
Petra Riedler,
Piotr Rymaszewski,
Lars Schall,
Philippe Schwemling,
Walter Snoeys,
Tianyang Wang,
Norbert Wermes,
Sinou Zhang
Abstract:
Monolithic active pixel sensors with depleted substrates present a promising option for pixel detectors in high-radiation environments. High-resistivity silicon substrates and high bias voltage capabilities in commercial CMOS technologies facilitate depletion of the charge sensitive volume. TJ-Monopix2 and LF-Monopix2 are the most recent large-scale chips in their respective development line, aimi…
▽ More
Monolithic active pixel sensors with depleted substrates present a promising option for pixel detectors in high-radiation environments. High-resistivity silicon substrates and high bias voltage capabilities in commercial CMOS technologies facilitate depletion of the charge sensitive volume. TJ-Monopix2 and LF-Monopix2 are the most recent large-scale chips in their respective development line, aiming for the ATLAS Inner Tracker outer layer requirements. Those include a tolerance to ionizing radiation of up to 100$\,$Mrad. It was evaluated by irradiating both devices with X-rays to the corresponding ionization dose, showing no significant degradation of the performance at 100$\,$Mrad and continuous operability throughout the irradiation campaign.
△ Less
Submitted 5 June, 2025;
originally announced June 2025.
-
Optimizing Charge Transport Simulation for Hybrid Pixel Detectors
Authors:
X. Xie,
R. Barten,
A. Bergamaschi,
B. Braham,
M. Brückner,
M. Carulla,
R. Dinapoli,
S. Ebner,
K. Ferjaoui,
E. Fröjdh,
D. Greiffenberg,
S. Hasanaj,
J. Heymes,
V. Hinger,
T. King,
P. Kozlowski,
C. Lopez-Cuenca,
D. Mezza,
K. Moustakas,
A. Mozzanica,
K. A. Paton,
C. Ruder,
B. Schmitt,
P. Sieberer,
D. Thattil
, et al. (1 additional authors not shown)
Abstract:
To enhance the spatial resolution of the MÖNCH 25 \textmu m pitch hybrid pixel detector, deep learning models have been trained using both simulation and measurement data. Challenges arise when comparing simulation-based deep learning models to measurement-based models for electrons, as the spatial resolution achieved through simulations is notably inferior to that from measurements. Discrepancies…
▽ More
To enhance the spatial resolution of the MÖNCH 25 \textmu m pitch hybrid pixel detector, deep learning models have been trained using both simulation and measurement data. Challenges arise when comparing simulation-based deep learning models to measurement-based models for electrons, as the spatial resolution achieved through simulations is notably inferior to that from measurements. Discrepancies are also observed when directly comparing X-ray simulations with measurements, particularly in the spectral output of single pixels. These observations collectively suggest that current simulations require optimization.
To address this, the dynamics of charge carriers within the silicon sensor have been studied using Monte Carlo simulations, aiming to refine the charge transport modeling. The simulation encompasses the initial generation of the charge cloud, charge cloud drift, charge diffusion and repulsion, and electronic noise. The simulation results were validated with measurements from the MÖNCH detector for X-rays, and the agreement between measurements and simulations was significantly improved by accounting for the charge repulsion.
△ Less
Submitted 22 October, 2024; v1 submitted 30 July, 2024;
originally announced July 2024.
-
Cross talk of a large-scale depleted monolithic active pixel sensor (DMAPS) in 180 nm CMOS technology
Authors:
Lars Schall,
Christian Bespin,
Ivan Caicedo,
Jochen Dingfelder,
Tomasz Hemperek,
Toko Hirono,
Fabian Hügging,
Hans Krüger,
Konstantinos Moustakas,
Heinz Pernegger,
Petra Riedler,
Walter Snoeys,
Norbert Wermes,
Sinuo Zhang
Abstract:
Monolithic pixel detectors combine readout electronics and sensor in a single entity of silicon, which simplifies the production procedure and lowers the material budget compared to conventional hybrid pixel detector concepts. Benefiting from the advances in commercial CMOS processes towards large biasing voltage capabilities and the increasing availability of high-resistivity substrates, depleted…
▽ More
Monolithic pixel detectors combine readout electronics and sensor in a single entity of silicon, which simplifies the production procedure and lowers the material budget compared to conventional hybrid pixel detector concepts. Benefiting from the advances in commercial CMOS processes towards large biasing voltage capabilities and the increasing availability of high-resistivity substrates, depleted monolithic active pixel sensors (DMAPS) are able to cope with the high-rate and high-radiation environments faced in modern high-energy physics experiments. TJ-Monopix2 is the latest iteration of a DMAPS development line designed in 180 nm TowerSemicondutor technology, which features a large scale (2 x 2) cm$^2$ chip divided into (512 x 512) pixels with a pitch of (33 x 33) um$^2$. All in-pixel electronics are separated from its small collection electrode and process modifications are implemented to improve charge collection efficiency especially after irradiation. The latest laboratory measurements and investigations of a threshold variation observed for TJ-Monopix2 in typical operating conditions are presented.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Characterization of iLGADs using soft X-rays
Authors:
Antonio Liguori,
Rebecca Barten,
Filippo Baruffaldi,
Anna Bergamaschi,
Giacomo Borghi,
Maurizio Boscardin,
Martin Brückner,
Tim Alexander Butcher,
Maria Carulla,
Matteo Centis Vignali,
Roberto Dinapoli,
Simon Ebner,
Francesco Ficorella,
Erik Fröjdh,
Dominic Greiffenberg,
Omar Hammad Ali,
Shqipe Hasanaj,
Julian Heymes,
Viktoria Hinger,
Thomas King,
Pawel Kozlowski,
Carlos Lopez-Cuenca,
Davide Mezza,
Konstantinos Moustakas,
Aldo Mozzanica
, et al. (9 additional authors not shown)
Abstract:
Experiments at synchrotron radiation sources and X-ray Free-Electron Lasers in the soft X-ray energy range ($250$eV--$2$keV) stand to benefit from the adaptation of the hybrid silicon detector technology for low energy photons. Inverse Low Gain Avalanche Diode (iLGAD) sensors provide an internal gain, enhancing the signal-to-noise ratio and allowing single photon detection below $1$keV using hybri…
▽ More
Experiments at synchrotron radiation sources and X-ray Free-Electron Lasers in the soft X-ray energy range ($250$eV--$2$keV) stand to benefit from the adaptation of the hybrid silicon detector technology for low energy photons. Inverse Low Gain Avalanche Diode (iLGAD) sensors provide an internal gain, enhancing the signal-to-noise ratio and allowing single photon detection below $1$keV using hybrid detectors. In addition, an optimization of the entrance window of these sensors enhances their quantum efficiency (QE). In this work, the QE and the gain of a batch of different iLGAD diodes with optimized entrance windows were characterized using soft X-rays at the Surface/Interface:Microscopy beamline of the Swiss Light Source synchrotron. Above $250$eV, the QE is larger than $55\%$ for all sensor variations, while the charge collection efficiency is close to $100\%$. The average gain depends on the gain layer design of the iLGADs and increases with photon energy. A fitting procedure is introduced to extract the multiplication factor as a function of the absorption depth of X-ray photons inside the sensors. In particular, the multiplication factors for electron- and hole-triggered avalanches are estimated, corresponding to photon absorption beyond or before the gain layer, respectively.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Charge collection and efficiency measurements of the TJ-Monopix2 DMAPS in 180$\,$nm CMOS technology
Authors:
Christian Bespin,
Ivan Caicedo,
Jochen Dingfelder,
Tomasz Hemperek,
Toko Hirono,
Fabian Hügging,
Hans Krüger,
Konstantinos Moustakas,
Heinz Pernegger,
Petra Riedler,
Lars Schall,
Walter Snoeys,
Norbert Wermes
Abstract:
Monolithic CMOS pixel detectors have emerged as competitive contenders in the field of high-energy particle physics detectors. By utilizing commercial processes they offer high-volume production of such detectors. A series of prototypes has been designed in a 180$\,$nm Tower process with depletion of the sensor material and a column-drain readout architecture. The latest iteration, TJ-Monopix2, fe…
▽ More
Monolithic CMOS pixel detectors have emerged as competitive contenders in the field of high-energy particle physics detectors. By utilizing commercial processes they offer high-volume production of such detectors. A series of prototypes has been designed in a 180$\,$nm Tower process with depletion of the sensor material and a column-drain readout architecture. The latest iteration, TJ-Monopix2, features a large 2$\,$cm x 2$\,$cm matrix consisting of 512 x 512 pixels with 33.04$\,$um pitch. A small collection electrode design aims at low power consumption and low noise while the radiation tolerance for high-energy particle detector applications needs extra attention. With a goal to reach radiation tolerance to levels of $10^{15}\,1\,$MeV n$_\text{eq}\,$cm$^{-2}$ of NIEL damage a modification of the standard process has been implemented by adding a low-dosed n-type silicon implant across the pixel in order to allow for homogeneous depletion of the sensor volume. Recent lab measurements and beam tests were conducted for unirradiated modules to study electrical characteristics and hit detection efficiency.
△ Less
Submitted 31 January, 2023;
originally announced January 2023.
-
Detection of MeV electrons using a charge integrating hybrid pixel detector
Authors:
E. Fröjdh,
F. Baruffaldi,
A. Bergamaschi,
M. Carulla,
R. Dinapoli,
D. Greiffenberg,
J. Heymes,
V. Hinger,
R. Ischebeck,
S. Mathisen,
J. McKenzie,
D. Mezza,
K. Moustakas,
A. Mozzanica,
B. Schmitt,
J. Zhang
Abstract:
Electrons are emerging as a strong complement to X-rays for diffraction based studies. In this paper we investigate the performance of a JUNGFRAU detector with 320 um thick silicon sensor at a pulsed electron source. Originally developed for X-ray detection at free electron lasers, JUNGFRAU features a dynamic range of 120 MeV/pixel (implemented with in-pixel gain switching) which translated to abo…
▽ More
Electrons are emerging as a strong complement to X-rays for diffraction based studies. In this paper we investigate the performance of a JUNGFRAU detector with 320 um thick silicon sensor at a pulsed electron source. Originally developed for X-ray detection at free electron lasers, JUNGFRAU features a dynamic range of 120 MeV/pixel (implemented with in-pixel gain switching) which translated to about 1200 incident electrons per pixel and frame in the MeV region. We preset basic characteristics such as energy deposited per incident particle, resulting cluster size and spatial resolution along with dynamic (intensity) range scans. Measurements were performed at 4, 10 and 20 MeV/c. We compare the measurements with GEANT4 based simulations and extrapolate the results to different sensor thicknesses using these simulations.
△ Less
Submitted 28 October, 2022;
originally announced October 2022.
-
Development of LGAD sensors with a thin entrance window for soft X-ray detection
Authors:
Jiaguo Zhang,
Rebecca Barten,
Filippo Baruffaldi,
Anna Bergamaschi,
Giacomo Borghi,
Maurizio Boscardin,
Martin Brueckner,
Maria Carulla,
Matteo Centis Vignali,
Roberto Dinapoli,
Simon Ebner,
Francesco Ficorella,
Erik Froejdh,
Dominic Greiffenberg,
Omar Hammad Ali,
Julian Heymes,
Shqipe Hasanaj,
Viktoria Hinger,
Thomas King,
Pawel Kozlowski,
Carlos Lopez-Cuenca,
Davide Mezza,
Konstantinos Moustakas,
Aldo Mozzanica,
Giovanni Paternoster
, et al. (4 additional authors not shown)
Abstract:
We show the developments carried out to improve the silicon sensor technology for the detection of soft X-rays with hybrid X-ray detectors. An optimization of the entrance window technology is required to improve the quantum efficiency. The LGAD technology can be used to amplify the signal generated by the X-rays and to increase the signal-to-noise ratio, making single photon resolution in the sof…
▽ More
We show the developments carried out to improve the silicon sensor technology for the detection of soft X-rays with hybrid X-ray detectors. An optimization of the entrance window technology is required to improve the quantum efficiency. The LGAD technology can be used to amplify the signal generated by the X-rays and to increase the signal-to-noise ratio, making single photon resolution in the soft X-ray energy range possible. In this paper, we report first results obtained from an LGAD sensor production with an optimized thin entrance window. Single photon detection of soft X-rays down to 452~eV has been demonstrated from measurements, with a signal-to-noise ratio better than 20.
△ Less
Submitted 24 October, 2022;
originally announced October 2022.
-
DMAPS Monopix developments in large and small electrode designs
Authors:
Christian Bespin,
Marlon Barbero,
Pierre Barrillon,
Ivan Berdalovic,
Siddharth Bhat,
Patrick Breugnon,
Ivan Caicedo,
Roberto Cardella,
Zongde Chen,
Yavuz Degerli,
Jochen Dingfelder,
Leyre Flores Sanz de Acedo,
Stephanie Godiot,
Fabrice Guilloux,
Toko Hirono,
Tomasz Hemperek,
Fabian Hügging,
Hans Krüger,
Thanushan Kugathasan,
Cesar Augusto Marin Tobon,
Konstantinos Moustakas,
Patrick Pangaud,
Heinz Pernegger,
Francesco Piro,
Petra Riedler
, et al. (8 additional authors not shown)
Abstract:
LF-Monopix1 and TJ-Monopix1 are depleted monolithic active pixel sensors (DMAPS) in 150 nm LFoundry and 180 nm TowerJazz CMOS technologies respectively. They are designed for usage in high-rate and high-radiation environments such as the ATLAS Inner Tracker at the High-Luminosity Large Hadron Collider (HL-LHC). Both chips are read out using a column-drain readout architecture. LF-Monopix1 follows…
▽ More
LF-Monopix1 and TJ-Monopix1 are depleted monolithic active pixel sensors (DMAPS) in 150 nm LFoundry and 180 nm TowerJazz CMOS technologies respectively. They are designed for usage in high-rate and high-radiation environments such as the ATLAS Inner Tracker at the High-Luminosity Large Hadron Collider (HL-LHC). Both chips are read out using a column-drain readout architecture. LF-Monopix1 follows a design with large charge collection electrode where readout electronics are placed inside. Generally, this offers a homogeneous electrical field in the sensor and short drift distances. TJ-Monopix1 employs a small charge collection electrode with readout electronics separated from the electrode and an additional n-type implant to achieve full depletion of the sensitive volume. This approach offers a low sensor capacitance and therefore low noise and is typically implemented with small pixel size. Both detectors have been characterized before and after irradiation using lab tests and particle beams.
△ Less
Submitted 9 July, 2020; v1 submitted 3 June, 2020;
originally announced June 2020.
-
Radiation hard DMAPS pixel sensors in 150nm CMOS technology for operation at LHC
Authors:
M. Barbero,
P. Barrillon,
C. Bespin,
S. Bhat,
P. Breugnon,
I. Caicedo,
Z. Chen,
Y. Degerli,
J. Dingfelder,
S. Godiot,
F. Guilloux,
T. Hemperek,
T. Hirono,
F. Hügging,
H. Krüger,
K. Moustakas,
A. Ouraou,
P. Pangaud,
I. Peric,
D-L. Pohl,
P. Rymaszewski,
P. Schwemling,
M. Vandenbroucke,
T. Wang,
N. Wermes
Abstract:
Monolithic Active Pixel Sensors (MAPS) have been developed since the late 1990s employing silicon substrate with a thin epitaxial layer in which deposited charge is collected by disordered diffusion rather than by drift in an electric field. As a consequence the signal is small and slow, and the radiation tolerance is below the requirements for LHC experiments by factors of 100 to 1000. We develop…
▽ More
Monolithic Active Pixel Sensors (MAPS) have been developed since the late 1990s employing silicon substrate with a thin epitaxial layer in which deposited charge is collected by disordered diffusion rather than by drift in an electric field. As a consequence the signal is small and slow, and the radiation tolerance is below the requirements for LHC experiments by factors of 100 to 1000. We developed fully depleted (D)MAPS pixel sensors employing a 150 nm CMOS technology and using a high resistivity substrate as well as a high biasing voltage. The development has been carried out in three subsequent iterations, from prototypes to a large pixel matrix comprising a complete readout architecture suitable for LHC operation. Full CMOS electronics is embedded in large deep n-wells which at the same time serve as collection nodes (large electrode design). The devices have been intensively characterized before and after irradiation employing lab tests as well as particle beams. The devices can cope with particle rates seen by the innermost pixel detectors of the LHC pp-experiments or as seen by the outer pixel layers of the planned HL-LHC upgrade. They are radiation hard to particle fluences of at least $10^{15}~\mathrm{n_{eq}/cm^2}$ and total ionization doses of at least 50 Mrad.
△ Less
Submitted 25 May, 2020; v1 submitted 4 November, 2019;
originally announced November 2019.
-
Mini-MALTA: Radiation hard pixel designs for small-electrode monolithic CMOS sensors for the High Luminosity LHC
Authors:
M. Dyndal,
V. Dao,
P. Allport,
I. Asensi Tortajada,
M. Barbero,
S. Bhat,
D. Bortoletto,
I. Berdalovic,
C. Bespin,
C. Buttar,
I. Caicedo,
R. Cardella,
F. Dachs,
Y. Degerli,
H. Denizli,
L. Flores Sanz de Acedo,
P. Freeman,
L. Gonella,
A. Habib,
T. Hemperek,
T. Hirono,
B. Hiti,
T. Kugathasan,
I. Mandić,
D. Maneuski
, et al. (19 additional authors not shown)
Abstract:
Depleted Monolithic Active Pixel Sensor (DMAPS) prototypes developed in the TowerJazz 180 nm CMOS imaging process have been designed in the context of the ATLAS upgrade Phase-II at the HL-LHC. The pixel sensors are characterized by a small collection electrode (3 $μ$m) to minimize capacitance, a small pixel size ($36.4\times 36.4$ $μ$m), and are produced on high resistivity epitaxial p-type silico…
▽ More
Depleted Monolithic Active Pixel Sensor (DMAPS) prototypes developed in the TowerJazz 180 nm CMOS imaging process have been designed in the context of the ATLAS upgrade Phase-II at the HL-LHC. The pixel sensors are characterized by a small collection electrode (3 $μ$m) to minimize capacitance, a small pixel size ($36.4\times 36.4$ $μ$m), and are produced on high resistivity epitaxial p-type silicon. The design targets a radiation hardness of $1\times10^{15}$ 1 MeV n$_{eq}$/cm$^{2}$, compatible with the outermost layer of the ATLAS ITK Pixel detector. This paper presents the results from characterization in particle beam tests of the Mini-MALTA prototype that implements a mask change or an additional implant to address the inefficiencies on the pixel edges. Results show full efficiency after a dose of $1\times10^{15}$ 1 MeV n$_{eq}$/cm$^{2}$.
△ Less
Submitted 14 December, 2019; v1 submitted 26 September, 2019;
originally announced September 2019.
-
The Monopix chips: Depleted monolithic active pixel sensors with a column-drain read-out architecture for the ATLAS Inner Tracker upgrade
Authors:
Ivan Caicedo,
Marlon Barbero,
Pierre Barrillon,
Ivan Berdalovic,
Siddharth Bhat,
Christian Bespin,
Patrick Breugnon,
Roberto Cardella,
Zongde Chen,
Yavuz Degerli,
Jochen Dingfelder,
Stephanie Godiot,
Fabrice Guilloux,
Toko Hirono,
Tomasz Hemperek,
Fabian Hügging,
Hans Krüger,
Thanushan Kugathasan,
Konstantinos Moustakas,
Patrick Pangaud,
Heinz Pernegger,
David-Leon Pohl,
Petra Riedler,
Alexandre Rozanov,
Piotr Rymaszewski
, et al. (5 additional authors not shown)
Abstract:
Two different depleted monolithic CMOS active pixel sensor (DMAPS) prototypes with a fully synchronous column-drain read-out architecture were designed and tested: LF-Monopix and TJ-Monopix. These chips are part of a R&D effort towards a suitable implementation of a CMOS DMAPS for the HL-LHC ATLAS Inner Tracker. LF-Monopix was developed using a 150nm CMOS process on a highly resistive substrate (>…
▽ More
Two different depleted monolithic CMOS active pixel sensor (DMAPS) prototypes with a fully synchronous column-drain read-out architecture were designed and tested: LF-Monopix and TJ-Monopix. These chips are part of a R&D effort towards a suitable implementation of a CMOS DMAPS for the HL-LHC ATLAS Inner Tracker. LF-Monopix was developed using a 150nm CMOS process on a highly resistive substrate (>2 k$Ω\,$cm), while TJ-Monopix was fabricated using a modified 180 nm CMOS process with a 1 k$Ω\,$cm epi-layer for depletion. The chips differ in their front-end design, biasing scheme, pixel pitch, dimensions of the collecting electrode relative to the pixel size (large and small electrode design, respectively) and the placement of read-out electronics within such electrode. Both chips were operational after thinning down to 100 $\mathrmμ$m and additional back-side processing in LF-Monopix for total bulk depletion. The results in this work include measurements of their leakage current, noise, threshold dispersion, response to minimum ionizing particles and efficiency in test beam campaigns. In addition, the outcome from measurements after irradiation with neutrons up to a dose of $1\times10^{15}\,\mathrm{n_{eq} / cm}^{2}$ and its implications for future designs are discussed.
△ Less
Submitted 25 April, 2019; v1 submitted 10 February, 2019;
originally announced February 2019.
-
CMOS Monolithic Pixel Sensors based on the Column-Drain Architecture for the HL-LHC Upgrade
Authors:
K. Moustakas,
M. Barbero,
I. Berdalovic,
C. Bespin,
P. Breugnon,
I. Caicedo,
R. Cardella,
Y. Degerli,
N. Egidos Plaja,
S. Godiot,
F. Guilloux,
T. Hemperek,
T. Hirono,
H. Krueger,
T. Kugathasan,
C. A. Marin Tobon,
P. Pangaud,
H. Pernegger,
E. J. Schioppa,
W. Snoeys,
M. Vandenbroucke,
T. Wang,
N. Wermes
Abstract:
Depleted Monolithic Active Pixel Sensors (DMAPS) constitute a promising low cost alternative for the outer layers of the ATLAS experiment Inner Tracker (ITk). Realizations in modern, high resistivity CMOS technologies enhance their radiation tolerance by achieving substantial depletion of the sensing volume. Two DMAPS prototypes that use the same "column-drain" readout architecture and are based o…
▽ More
Depleted Monolithic Active Pixel Sensors (DMAPS) constitute a promising low cost alternative for the outer layers of the ATLAS experiment Inner Tracker (ITk). Realizations in modern, high resistivity CMOS technologies enhance their radiation tolerance by achieving substantial depletion of the sensing volume. Two DMAPS prototypes that use the same "column-drain" readout architecture and are based on different sensor implementation concepts named LF-Monopix and TJ-Monopix have been developed for the High Luminosity upgrade of the Large Hardon Collider (HL-LHC).
LF-Monopix was fabricated in the LFoundry 150 nm technology and features pixel size of $50x250~μm^{2}$ and large collection electrode opted for high radiation tolerance. Detection efficiency up to 99\% has been measured after irradiation to $1\cdot10^{15}~n_{eq}/cm^{2}$. TJ-Monopix is a large scale $(1x2~cm^{2})$ prototype featuring pixels of $36x40~μm^{2}$ size. It was fabricated in a novel TowerJazz 180 nm modified process that enables full depletion of the sensitive layer, while employing a small collection electrode that is less sensitive to crosstalk. The resulting small sensor capacitance ($<=3~fF$) is exploited by a compact, low power front end optimized to meet the 25ns timing requirement. Measurement results demonstrate the sensor performance in terms of Equivalent Noise Charge (ENC) $\approx11e^{-}$, threshold $\approx300~e^-$, threshold dispersion $\approx30~e^-$ and total power consumption lower than $120~mW/cm^2$.
△ Less
Submitted 10 September, 2018;
originally announced September 2018.
-
An Open-Source OpenSim Oculomotor Model for Kinematics and Dynamics Simulation
Authors:
Konstantinos Filip,
Dimitar Stanev,
Konstantinos Moustakas
Abstract:
Physics-based modeling and dynamic simulation of human eye movements has significant implications for improving our understanding of the oculomotor system and treating various visuomotor disorders. We introduce an open-source biomechanical model of the human eye that can be used for kinematics and dynamics analysis. This model is based on the passive pulley hypothesis, constructed based on the dat…
▽ More
Physics-based modeling and dynamic simulation of human eye movements has significant implications for improving our understanding of the oculomotor system and treating various visuomotor disorders. We introduce an open-source biomechanical model of the human eye that can be used for kinematics and dynamics analysis. This model is based on the passive pulley hypothesis, constructed based on the data reported in literature regarding physiological measurements of the human eye and made publicly available. The model is implemented in OpenSim, which is an open-source framework for modeling and simulation of musculoskeletal systems. The model incorporates an eye globe, orbital suspension tissues and six extraocular muscles. The excitation and activation patterns for a variety of targets can be calculated using the proposed closed-loop fixation controller that drives the model to perform saccadic movements in a forward dynamics manner. The controller minimizes the error between the desired saccadic trajectory and the predicted movement. Consequently, this model enables the investigation muscle activation patterns during static fixation and analyze the dynamics of eye movements.
△ Less
Submitted 19 July, 2018;
originally announced July 2018.
-
Depleted fully monolithic CMOS pixel detectors using a column based readout architecture for the ATLAS Inner Tracker upgrade
Authors:
T. Wang,
M. Barbero,
I. Berdalovic,
C. Bespin,
S. Bhat,
P. Breugnon,
I. Caicedo,
R. Cardella,
Z. Chen,
Y. Degerli,
N. Egidos,
S. Godiot,
F. Guilloux,
T. Hemperek,
T. Hirono,
H. Krüger,
T. Kugathasan,
F. Hügging,
C. A. Marin Tobon,
K. Moustakas,
P. Pangaud,
P. Schwemling,
H. Pernegger,
D-L. Pohl,
A. Rozanov
, et al. (3 additional authors not shown)
Abstract:
Depleted monolithic active pixel sensors (DMAPS), which exploit high voltage and/or high resistivity add-ons of modern CMOS technologies to achieve substantial depletion in the sensing volume, have proven to have high radiation tolerance towards the requirements of ATLAS in the high-luminosity LHC era. Depleted fully monolithic CMOS pixels with fast readout architectures are currently being develo…
▽ More
Depleted monolithic active pixel sensors (DMAPS), which exploit high voltage and/or high resistivity add-ons of modern CMOS technologies to achieve substantial depletion in the sensing volume, have proven to have high radiation tolerance towards the requirements of ATLAS in the high-luminosity LHC era. Depleted fully monolithic CMOS pixels with fast readout architectures are currently being developed as promising candidates for the outer pixel layers of the future ATLAS Inner Tracker, which will be installed during the phase II upgrade of ATLAS around year 2025. In this work, two DMAPS prototype designs, named LF-MonoPix and TJ-MonoPix, are presented. LF-MonoPix was designed and fabricated in the LFoundry 150~nm CMOS technology, and TJ-MonoPix has been designed in the TowerJazz 180~nm CMOS technology. Both chips employ the same readout architecture, i.e. the column drain architecture, whereas different sensor implementation concepts are pursued. The design of the two prototypes will be described. First measurement results for LF-MonoPix will also be shown.
△ Less
Submitted 29 September, 2017;
originally announced October 2017.
