-
Uncovering flow and deformation regimes in the coupled fluid-solid vestibular system
Authors:
Javier Chico-Vázquez,
Derek E. Moulton,
Dominic Vella
Abstract:
In this paper, we showcase how flow obstruction by a deformable object can lead to symmetry breaking in curved domains subject to angular acceleration. Our analysis is motivated by the deflection of the cupula, a soft tissue located in the inner ear that is used to perceive rotational motion as part of the vestibular system. The cupula is understood to block the rotation-induced flow in a toroidal…
▽ More
In this paper, we showcase how flow obstruction by a deformable object can lead to symmetry breaking in curved domains subject to angular acceleration. Our analysis is motivated by the deflection of the cupula, a soft tissue located in the inner ear that is used to perceive rotational motion as part of the vestibular system. The cupula is understood to block the rotation-induced flow in a toroidal region with the flow-induced deformation of the cupula used by the brain to infer motion. By asymptotically solving the governing equations for this flow, we characterise regimes for which the sensory system is sensitive to either angular velocity or angular acceleration. Moreover, we show the fluid flow is not symmetric in the latter case. Finally, we extend our analysis of symmetry breaking to understand the formation of vortical flow in cavernous regions within channels. We discuss the implications of our results for the sensing of rotation by mammals.
△ Less
Submitted 8 April, 2025;
originally announced April 2025.
-
A novel understanding of the role of plasma-molecular kinetics on divertor power exhaust
Authors:
N. Osborne,
K. Verhaegh,
D. Moulton,
H. Reimerdes,
P. Ryan,
N. Lonigro,
S. Mijin,
R. Osawa,
K. Murray,
S. Kobussen,
Y. Damizia,
A. Perek,
C. Theiler,
R. Ducker,
D. Mykytchuk
Abstract:
During detachment, a buffer of neutral atoms and molecules builds up between the target and the ionising plasma. Collisions between the plasma and the molecules play an important role in the detachment process. Studies of plasma-molecular kinetics indicate that the gas temperature is increased during detachment for a wide range of conditions on the MAST-U and TCV tokamaks. This is related to an in…
▽ More
During detachment, a buffer of neutral atoms and molecules builds up between the target and the ionising plasma. Collisions between the plasma and the molecules play an important role in the detachment process. Studies of plasma-molecular kinetics indicate that the gas temperature is increased during detachment for a wide range of conditions on the MAST-U and TCV tokamaks. This is related to an increased $\mathrm{D}_2$ lifetime during detachment, leading to more plasma-molecule collisions that raise the molecular temperature. Such collisions subsequently result in significant power and momentum losses to the divertor plasma during detachment. Using a simplified inference, these losses are estimated using the rotational temperature, neutral pressure and ionisation front position. Significant power losses (about $10\%$ of $P_{SOL}$) and dominant momentum losses (majority of the upstream pressure) from plasma-molecule collisions are inferred experimentally in long-legged, strongly baffled, detached divertors (MAST-U Super-X divertor), consistent with SOLPS-ITER simulations. The vibrational distribution obtained is compared to a collisional-radiative model setup using the same rate data as SOLPS-ITER, indicating some qualitative agreements and disagreements, potentially highlighting model gaps with regard to the default rates used.
These interpretations highlight the importance of plasma-molecular collisions, leading to power and momentum losses during detachment. Our analysis and reduced modelling of these processes provide further insights into detachment control observations, the workings of long-legged divertors and divertor power balance.
△ Less
Submitted 29 May, 2025; v1 submitted 18 October, 2024;
originally announced October 2024.
-
2D electron density profile evolution during detachment in Super-X divertor L-mode discharges on MAST-U
Authors:
N. Lonigro,
R. S. Doyle,
K. Verhaegh,
B. Lipschultz,
D. Moulton,
P. Ryan,
J. S. Allcock,
C. Bowman,
D. Brida,
J. Harrison,
S. Silburn,
C. Theiler,
T. A. Wijkamp,
the WPTE Team,
MAST-U Team
Abstract:
2D electron density profiles obtained from coherence imaging spectroscopy in different MAST-U divertor conditions are compared. The data includes variations of strike point position, core electron density, and heating power. The improved performance of the long-legged divertors results in a lower electron density and particle flux at the target compared to configurations with smaller strike point…
▽ More
2D electron density profiles obtained from coherence imaging spectroscopy in different MAST-U divertor conditions are compared. The data includes variations of strike point position, core electron density, and heating power. The improved performance of the long-legged divertors results in a lower electron density and particle flux at the target compared to configurations with smaller strike point major radius, while also being characterized by lower temperatures and deeper detachment. Comparisons against SOLPS simulations generally show good agreement in profile shape along and across the separatrix. The peaking of the electron density downstream of the detachment front is associated with significant neutral drag acting on the plasma flow.
△ Less
Submitted 1 July, 2025; v1 submitted 1 October, 2024;
originally announced October 2024.
-
Simulating the Impact of Baffling on Divertor Performance Using SOLPS-ITER
Authors:
Cyd Cowley,
David Moulton,
Bruce Lipschultz
Abstract:
Strong divertor baffling is a feature expected to have a number of advantages for core-edge integration in tokamaks, yet one which requires much more detailed and extensive study. In this work, the impacts of baffling on a hydrogenic plasma are studied in isolation, through artificial fixed-fraction impurity SOLPS-ITER simulations. These simulations are of the connected double null Super-X diverto…
▽ More
Strong divertor baffling is a feature expected to have a number of advantages for core-edge integration in tokamaks, yet one which requires much more detailed and extensive study. In this work, the impacts of baffling on a hydrogenic plasma are studied in isolation, through artificial fixed-fraction impurity SOLPS-ITER simulations. These simulations are of the connected double null Super-X divertor on the MAST-U tokamak, with extreme cases of a closed and open divertor. Simulations show a divertor with a tightly baffled entrance can lead to better access to detachment on the outer targets, likely caused by reduced convection upstream. Adding tight baffling at the throat also leads to two orders of magnitude increase in neutral compression, and an order of magnitude more efficient pumping, with more peaked core density profiles. Finally, in contrast to the localised radiation of the closed divertor, the open divertor shows radiation along the entire plasma edge which moves upstream and inward into the core as detachment evolves; leading to sub-10eV temperatures in the near SOL at x-point.
△ Less
Submitted 18 July, 2024;
originally announced July 2024.
-
Minimal design of the elephant trunk as an active filament
Authors:
Bartosz Kaczmarski,
Sophie Leanza,
Renee Zhao,
Derek E. Moulton,
Ellen Kuhl,
Alain Goriely
Abstract:
One of the key problems in active materials is the control of shape through actuation. A fascinating example of such control is the elephant trunk, a long, muscular, and extremely dexterous organ with multiple vital functions. The elephant trunk is an object of fascination for biologists, physicists, and children alike. Its versatility relies on the intricate interplay of multiple unique physical…
▽ More
One of the key problems in active materials is the control of shape through actuation. A fascinating example of such control is the elephant trunk, a long, muscular, and extremely dexterous organ with multiple vital functions. The elephant trunk is an object of fascination for biologists, physicists, and children alike. Its versatility relies on the intricate interplay of multiple unique physical mechanisms and biological design principles. Here we explore these principles using the theory of active filaments and build, theoretically, computationally, and experimentally, a minimal model that explains and accomplishes some of the spectacular features of the elephant trunk.
△ Less
Submitted 14 February, 2024;
originally announced February 2024.
-
Divertor shaping with neutral baffling as a solution to the tokamak power exhaust challenge
Authors:
K. Verhaegh,
J. R. Harrison,
D. Moulton,
B. Lipschultz,
N. Lonigro,
N. Osborne,
P. Ryan,
C. Theiler,
T. Wijkamp,
D. Brida,
C. Cowley,
G. Derks,
R. Doyle,
F. Federici,
B. Kool,
O. Février,
A. Hakola,
S. Henderson,
H. Reimerdes,
A. J. Thornton,
N. Vianello,
M. Wischmeier,
L. Xiang
Abstract:
Exhausting power from the hot fusion core to the plasma-facing components is one of the biggest challenges in fusion energy. The MAST Upgrade tokamak uniquely integrates strong containment of neutrals within the exhaust area (divertor) with extreme divertor shaping capability. By systematically altering the divertor shape, this study shows the strongest evidence to date that long-legged divertors…
▽ More
Exhausting power from the hot fusion core to the plasma-facing components is one of the biggest challenges in fusion energy. The MAST Upgrade tokamak uniquely integrates strong containment of neutrals within the exhaust area (divertor) with extreme divertor shaping capability. By systematically altering the divertor shape, this study shows the strongest evidence to date that long-legged divertors with a high magnetic field gradient (total flux expansion) deliver key power exhaust benefits without adversely impacting the hot fusion core. These benefits are already achieved with relatively modest geometry adjustments that are more feasible to integrate in reactor designs. Benefits include reduced target heat loads and improved access to, and stability of, a neutral gas buffer that 'shields' the target and enhances power exhaust (detachment). Analysis and model comparisons shows these benefits are obtained by combining multiple shaping aspects: long-legged divertors have expanded plasma-neutral interaction volume that drive reductions in particle and power loads, while total flux expansion enhances detachment access and stability. Containing the neutrals in the exhaust area with physical structures further augments these shaping benefits. These results demonstrate strategic variation in the divertor geometry and magnetic topology is a potential solution to one of fusion's biggest challenges: power exhaust.
△ Less
Submitted 8 January, 2025; v1 submitted 14 November, 2023;
originally announced November 2023.
-
Investigations of atomic \& molecular processes of NBI-heated discharges in the MAST Upgrade Super-X divertor with implications for reactors
Authors:
K. Verhaegh,
J. R. Harrison,
B. Lipschultz,
N. Lonigro,
S. Kobussen,
D. Moulton,
N. Osborne,
P. Ryan,
C. Theiler,
T. Wijkamp,
D. Brida,
G. Derks,
R. Doyle,
F. Federici,
A. Hakola,
S. Henderson,
B. Kool,
S. Newton,
R. Osawa,
X. Pope,
H. Reimerdes,
N. Vianello,
M. Wischmeier
Abstract:
This experimental study presents an in-depth investigation of the performance of the MAST-U Super-X divertor during NBI-heated operation (up to 2.5 MW) focussing on volumetric ion sources and sinks as well as power losses during detachment.
The particle balance and power loss analysis revealed the crucial role of Molecular Activated Recombination and Dissociation (MAR and MAD) ion sinks in diver…
▽ More
This experimental study presents an in-depth investigation of the performance of the MAST-U Super-X divertor during NBI-heated operation (up to 2.5 MW) focussing on volumetric ion sources and sinks as well as power losses during detachment.
The particle balance and power loss analysis revealed the crucial role of Molecular Activated Recombination and Dissociation (MAR and MAD) ion sinks in divertor particle and power balance, which remain pronounced in the change from ohmic to higher power (NBI heated) L-mode conditions. The importance of MAR and MAD remains with double the absorbed NBI heating. MAD results in significant power dissipation (up to $\sim 20 \%$ of $P_{SOL}$), mostly in the cold ($T_e < 5$ eV) detached region. Theoretical and experimental evidence is found for the potential contribution of $D^-$ to MAR and MAD, which warrants further study.
These results suggest that MAR and MAD can be relevant in higher power conditions than the ohmic conditions studied previously. Post-processing reactor-scale simulations shows that MAR and MAD can play a significant role in divertor physics and synthetic diagnostic signals of reactor-scale devices, which are currently underestimated in exhaust simulations. This raises implications for the accuracy of reactor-scale divertor simulations of particularly tightly baffled (alternative) divertor configurations.
△ Less
Submitted 1 April, 2024; v1 submitted 14 November, 2023;
originally announced November 2023.
-
Active shape control by plants in dynamic environments
Authors:
Hadrien Oliveri,
Derek E. Moulton,
Heather A. Harrington,
Alain Goriely
Abstract:
Plants are a paradigm for active shape control in response to stimuli. For instance, it is well-known that a tilted plant will eventually straighten vertically, demonstrating the influence of both an external stimulus, gravity, and an internal stimulus, proprioception. These effects can be modulated when a potted plant is additionally rotated along the plant's axis, as in a rotating clinostat, lea…
▽ More
Plants are a paradigm for active shape control in response to stimuli. For instance, it is well-known that a tilted plant will eventually straighten vertically, demonstrating the influence of both an external stimulus, gravity, and an internal stimulus, proprioception. These effects can be modulated when a potted plant is additionally rotated along the plant's axis, as in a rotating clinostat, leading to intricate shapes. We use a morphoelastic model for the response of growing plants to study the joint effect of both stimuli at all rotation speeds. In the absence of rotation, we identify a universal planar shape towards which all shoots eventually converge. With rotation, we demonstrate the existence of a stable family of three-dimensional dynamic equilibria where the plant axis is fixed in space. Further, the effect of axial growth is to induce steady behaviors, such as solitary waves. Overall, this study offers new insight into the complex out-of-equilibrium dynamics of a plant in three dimensions and further establishes that internal stimuli in active materials are key for robust shape control.
△ Less
Submitted 16 September, 2023;
originally announced September 2023.
-
ReMKiT1D -- A framework for building reactive multi-fluid models of the tokamak Scrape-Off Layer with coupled electron kinetics in 1D
Authors:
Stefan Mijin,
Dominic Power,
Ryan Holden,
William Hornsby,
David Moulton,
Fulvio Militello
Abstract:
In this manuscript we present the recently developed flexible framework for building both fluid and electron kinetic models of the tokamak Scrape-Off Layer in 1D - ReMKiT1D (Reactive Multi-fluid and Kinetic Transport in 1D). The framework can handle systems of non-linear ODEs, various 1D PDEs arising in fluid modelling, as well as PDEs arising from the treatment of the electron kinetic equation. A…
▽ More
In this manuscript we present the recently developed flexible framework for building both fluid and electron kinetic models of the tokamak Scrape-Off Layer in 1D - ReMKiT1D (Reactive Multi-fluid and Kinetic Transport in 1D). The framework can handle systems of non-linear ODEs, various 1D PDEs arising in fluid modelling, as well as PDEs arising from the treatment of the electron kinetic equation. As such, the framework allows for flexibility in fluid models of the Scrape-Off Layer while allowing the easy addition of kinetic electron effects. We focus on presenting both the high-level design decisions that allow for model flexibility, as well as the most important implementation aspects. A significant number of verification and performance tests are presented, as well as a step-by-step walkthrough of a simple example for setting up models using the Python interface.
△ Less
Submitted 22 February, 2024; v1 submitted 28 July, 2023;
originally announced July 2023.
-
The role of plasma-atom and molecule interactions on power \& particle balance during detachment on the MAST Upgrade Super-X divertor
Authors:
Kevin Verhaegh,
Bruce Lipschultz,
James Harrison,
Fabio Federici,
David Moulton,
Nicola Lonigro,
Stijn Kobussen,
Martin O'Mullane,
Nick Osborne,
Peter Ryan,
Tijs Wijkamp,
Bob Kool,
Effy Rose,
Christian Theiler,
Andrew Thornton
Abstract:
This paper shows first quantitative analysis of the detachment processes in the MAST Upgrade Super-X divertor (SXD). We identify an unprecedented impact of plasma-molecular interactions involving molecular ions (likely $D_2^+$), resulting in strong ion sinks (Molecular Activated Recombination - MAR), leading to a reduction of ion target flux. The MAR ion sinks exceed the divertor ion sources befor…
▽ More
This paper shows first quantitative analysis of the detachment processes in the MAST Upgrade Super-X divertor (SXD). We identify an unprecedented impact of plasma-molecular interactions involving molecular ions (likely $D_2^+$), resulting in strong ion sinks (Molecular Activated Recombination - MAR), leading to a reduction of ion target flux. The MAR ion sinks exceed the divertor ion sources before electron-ion recombination (EIR) starts to occur, suggesting that significant ionisation occurs outside of the divertor chamber. In the EIR region, $T_e \ll 0.2$ eV is observed and MAR remains significant in these deep detached phases. The total ion sink strength demonstrates the capability for particle (ion) exhaust in the Super-X Configuration.
Molecular Activated Dissociation (MAD) is the dominant volumetric neutral atom creation process can lead to an electron cooling of 20\% of $P_{SOL}$. The measured total radiative power losses \emph{in the divertor chamber} are consistent with inferred hydrogenic radiative power losses. This suggests that intrinsic divertor impurity radiation, despite the carbon walls, is minor in the divertor chamber. This contrasts previous TCV results, which may be associated with enhanced plasma-neutral interactions and reduced chemical erosion in the detached, tightly baffled SXD.
The above observations have also been observed in higher heat flux (narrower SOL width) type I ELMy H-mode discharges. This provides evidence that the characterisation in this paper may be general.
△ Less
Submitted 2 October, 2023; v1 submitted 18 April, 2023;
originally announced April 2023.
-
Investigating the impact of the molecular charge-exchange rate on detached SOLPS-ITER simulations
Authors:
Kevin Verhaegh,
Aelwyn C Williams,
David Moulton,
Bruce Lipschultz,
Basil P. Duval,
Olivier Fevrier,
Alexandre Fil,
Nick Osborne,
Holger Reimerdes,
Christian Theiler
Abstract:
Plasma-molecular interactions generate molecular ions which react with the plasma and contribute to detachment through molecular activated recombination (MAR), reducing the ion target flux, and molecular activated dissociation (MAD), both of which create excited atoms. Hydrogenic emission from these atoms have been detected experimentally in detached TCV, JET and MAST-U deuterium plasmas. The TCV…
▽ More
Plasma-molecular interactions generate molecular ions which react with the plasma and contribute to detachment through molecular activated recombination (MAR), reducing the ion target flux, and molecular activated dissociation (MAD), both of which create excited atoms. Hydrogenic emission from these atoms have been detected experimentally in detached TCV, JET and MAST-U deuterium plasmas. The TCV findings, however, were in disagreement with SOLPS-ITER simulations for deuterium indicating a molecular ion density ($D_2^+$) that was insufficient to lead to significant hydrogenic emission, which was attributed to underestimates of the molecular charge exchange rate ($D_2 + D^+ \rightarrow D_2^+ + D$) for deuterium (obtained by rescaling the hydrogen rates by their isotope mass).
In this work, we have performed new SOLPS-ITER simulations with the default rate setup and a modified rate setup where ion isotope mass rescaling was disabled. This increased the $D_2^+$ content by $> \times 100$. By disabling ion isotope mass rescaling: 1) the total ion sinks are more than doubled due to the inclusion of MAR; 2) the additional MAR causes the ion target flux to roll-over during detachment; 3) the total $Dα$ emission in the divertor increases during deep detachment by roughly a factor four; 4) the neutral atom density in the divertor is doubled due to MAD, leading to a 50\% increase in neutral pressure; 5) total hydrogenic power loss is increased by up to 60\% due to MAD. These differences result in an improved agreement between the experiment and the simulations in terms of spectroscopic measurements, ion source/sink inferences and the occurrence of an ion target flux roll-over.
△ Less
Submitted 16 April, 2023; v1 submitted 26 January, 2023;
originally announced January 2023.
-
Spectroscopic investigations of detachment on the MAST Upgrade Super-X divertor
Authors:
Kevin Verhaegh,
Bruce Lipschultz,
James Harrison,
Nick Osborne,
Aelwyn Williams,
Peter Ryan,
James Clark,
Fabio Federici,
Bob Kool,
Tijs Wijkamp,
Alexandre Fil,
David Moulton,
Omkar Myatra,
Andrew Thornton,
Thomas Bosman,
Geof Cunningham,
Basil Duval,
Stuart Henderson,
Rory Scannell,
the MAST Upgrade team
Abstract:
We present the first analysis of the atomic and molecular processes at play during detachment in the MAST-U Super-X divertor using divertor spectroscopy data. Our analysis indicates detachment in the MAST-U Super-X divertor can be separated into four sequential phases: First, the ionisation region detaches from the target at detachment onset leaving a region of increased molecular densities downst…
▽ More
We present the first analysis of the atomic and molecular processes at play during detachment in the MAST-U Super-X divertor using divertor spectroscopy data. Our analysis indicates detachment in the MAST-U Super-X divertor can be separated into four sequential phases: First, the ionisation region detaches from the target at detachment onset leaving a region of increased molecular densities downstream. The plasma interacts with these molecules, resulting in molecular ions ($D_2^+$ and/or $D_2^- \rightarrow D + D^-$) that further react with the plasma leading to Molecular Activated Recombination and Dissociation (MAR and MAD), which results in excited atoms and significant Balmer line emission. Second, the MAR region detaches from the target leaving a sub-eV temperature region downstream. Third, an onset of strong emission from electron-ion recombination (EIR) ensues. Finally, the electron density decays near the target, resulting in a density front moving upstream.
The analysis in this paper indicates that plasma-molecule interactions have a larger impact than previously reported and play a critical role in the intensity and interpretation of hydrogen atomic line emission characteristics on MAST-U. Furthermore, we find that the Fulcher band emission profile in the divertor can be used as a proxy for the ionisation region and may also be employed as a plasma temperature diagnostic for improving the separation of hydrogenic emission arising from electron-impact excitation and that from plasma-molecular interactions.
We provide evidences for the presence of low electron temperatures ($<0.5$ eV) during detachment phases III-IV based on quantitative spectroscopy analysis, a Boltzmann relation of the high-n Balmer line transitions together with an analysis of the brightness of high-n Balmer lines.
△ Less
Submitted 18 October, 2022; v1 submitted 5 April, 2022;
originally announced April 2022.
-
Role of kidney stones in renal pelvis flow
Authors:
C. R. Constante-Amores,
L. Kahouadji,
J. G. Williams,
D. E. Moulton,
B. W. Turney,
S. Shin,
J. Chergui,
D. Juric,
S. L. Waters
Abstract:
We examine the time-dependent flow dynamics inside an idealised renal pelvis in the context of a surgical procedure for kidney stone removal, extending previous work by Williams et al. (2020,2021), who showed how vortical flow structures can hinder mass transport in a canonical two-dimensional domain. Here, we examine the time-dependent evolution of these vortical flow structures in three-dimensio…
▽ More
We examine the time-dependent flow dynamics inside an idealised renal pelvis in the context of a surgical procedure for kidney stone removal, extending previous work by Williams et al. (2020,2021), who showed how vortical flow structures can hinder mass transport in a canonical two-dimensional domain. Here, we examine the time-dependent evolution of these vortical flow structures in three-dimensions, and incorporate the presence of rigid kidney stones. We perform direct numerical simulations, solving the transient Navier-Stokes equations in a spherical domain. The results shed light on the crucial role of flow circulation in the renal cavity and its effect on the trajectories of rigid stones. We demonstrate that stones can either be washed out of the cavity along with the fluid, or be trapped in the cavity via their interaction with vortical flow structures. Additionally, we study the effect of multiple stones in the flow field within the cavity in terms of the kinetic energy, entrapped fluid volume, and the clearance rate of a passive tracer modelled via an advection--diffusion equation. We demonstrate that the flow in the presence of stones features a higher vorticity production within the cavity compared with the stone-free cases.
△ Less
Submitted 23 November, 2022; v1 submitted 28 March, 2022;
originally announced March 2022.
-
Comparison between MAST-U conventional and Super-X configurations through SOLPS-ITER modelling
Authors:
Alexandre Fil,
Bruce Lipschultz,
David Moulton,
Andrew Thornton,
Ben Dudson,
Omkar Myatra,
Kevin Verhaegh,
EUROFusion MST1 team
Abstract:
MAST-U has recently started operating with a Super-X divertor, designed to increase total flux expansion and neutral trapping, both predicted through simple analytic models and SOLPS calculations to reduce the plasma and impurity density detachment thresholds. In this study, utilising the SOLPS-ITER code, we are quantifying the possible gain allowed by the MAST-U Super-X and neutral baffling geome…
▽ More
MAST-U has recently started operating with a Super-X divertor, designed to increase total flux expansion and neutral trapping, both predicted through simple analytic models and SOLPS calculations to reduce the plasma and impurity density detachment thresholds. In this study, utilising the SOLPS-ITER code, we are quantifying the possible gain allowed by the MAST-U Super-X and neutral baffling geometry, in terms of access to detachment. We show that a significant reduction of the upstream density detachment threshold (up to a factor 1.6) could be achieved in MAST-U, for the Super-X, as opposed to conventional divertor geometry, mainly through an increased total flux expansion, neutral trapping being found very similar between the different configurations. We also show that variations of the strike-point angle are complex to interpret in such a tightly baffled geometry, and that a case in which the target normal points more towards the separatrix does not necessarily imply a lower detachment threshold. As in previous calculations for TCV, we quantify the role of neutral effects through developing and applying a quantitative definition of neutral trapping.
△ Less
Submitted 13 July, 2022; v1 submitted 25 February, 2022;
originally announced February 2022.
-
The role of plasma-molecule interactions on power and particle balance during detachment on the TCV tokamak
Authors:
Kevin Verhaegh,
Bruce Lipschultz,
James Harrison,
Basil Duval,
Alex Fil,
Mirko Wensing,
Chris Bowman,
Daljeet Gahle,
Andrei Kukushkin,
David Moulton,
Artur Perek,
Andrey Pshenov,
Fabio Federici,
Olivier Février,
Omkar Myatra,
Andreas Smolders,
Christian Theiler
Abstract:
This paper shows experimental results from the TCV tokamak that indicate plasma-molecule interactions involving $D_2^+$ and possibly $D^-$ play an important role as sinks of energy (through hydrogenic radiation as well as dissociation) and particles during divertor detachment if low target temperatures ($< 3$ eV) are achieved. Both molecular activated recombination (MAR) and ion source reduction d…
▽ More
This paper shows experimental results from the TCV tokamak that indicate plasma-molecule interactions involving $D_2^+$ and possibly $D^-$ play an important role as sinks of energy (through hydrogenic radiation as well as dissociation) and particles during divertor detachment if low target temperatures ($< 3$ eV) are achieved. Both molecular activated recombination (MAR) and ion source reduction due to a power limitation effect are shown to be important in reducing the ion target flux during a density ramp. In contrast, the electron-ion recombination (EIR) ion sink is too small to play an important role in reducing the ion target flux. MAR or EIR do not occur during $N_2$ seeding induced detachment as the target temperatures are not sufficiently low.
The impact of $D_2^+$ is shown to be underestimated in present (vibrationally unresolved) SOLPS-ITER simulations, which could result from an underestimated $D_2 + D^+ \rightarrow D_2^+ + D$ rate. The converged SOLPS-ITER simulations are post-processed with alternative reaction rates, resulting in considerable contributions of $D_2^+$ to particle and power losses as well as dissociation below the $D_2$ dissociation area. Those findings are in quantitative agreement with the experimental results.
△ Less
Submitted 30 July, 2021; v1 submitted 7 June, 2021;
originally announced June 2021.
-
A novel hydrogenic spectroscopic technique for inferring the role of plasma-molecule interaction on power and particle balance during detached conditions
Authors:
K Verhaegh,
B Lipschultz,
C Bowman,
B P Duval,
U Fantz,
A Fil,
J R Harrison,
D Moulton,
O Myatra,
D Wünderlich,
F Federici,
D S Gahle,
A Perek,
M Wensing,
the TCV team,
the EuroFusion MST1 team
Abstract:
Detachment, an important mechanism for reducing target heat deposition, is achieved through reductions in power, particle and momentum; which are induced through plasma-atom and plasma-molecule interactions. Experimental research in how those reactions precisely contribute to detachment is limited. In this work, we investigate a new spectroscopic technique to utilise Hydrogen Balmer line measureme…
▽ More
Detachment, an important mechanism for reducing target heat deposition, is achieved through reductions in power, particle and momentum; which are induced through plasma-atom and plasma-molecule interactions. Experimental research in how those reactions precisely contribute to detachment is limited. In this work, we investigate a new spectroscopic technique to utilise Hydrogen Balmer line measurements to 1) disentangle the Balmer line emission from the various plasma-atom and plasma-molecule interactions; and 2) quantify their contributions to ionisation, recombination and radiative power losses. During detachment, the observed $Hα$ emission often strongly increases, which could be an indicator for plasma-molecule interactions involving $H_2^+$ and/or $H^-$. Our analysis technique quantifies the $Hα$ emission due to plasma-molecule interactions and uses this to 1) quantify the Balmer line emission contribution due to $H_2^+$ and/or $H^-$; 2) subsequently estimate its resulting particle sinks/sources and radiative power losses. Its performance is verified using synthetic diagnostic techniques of both detached TCV and MAST-U SOLPS-ITER simulations. Experimental results of this technique on TCV data show a bifurcation occurs between the measured total $Hα$ and the atomic estimate of $Hα$ emission, indicative of the presence of additional $Hα$ due to plasma-molecule interactions with $H_2^+$ (and/or $H^-$). An example analysis shows that the hydrogenic line series, even $Lyα$ as well as the medium-n Balmer lines can be significantly influenced by plasma-molecule interactions by tens of percent during which significant Molecular Activated Recombination (MAR) is expected.
△ Less
Submitted 17 February, 2021; v1 submitted 1 August, 2020;
originally announced August 2020.
-
A study of the influence of plasma-molecule interactions on particle balance during detachment
Authors:
K Verhaegh,
B Lipschultz,
J R Harrison,
B P Duval,
C Bowman,
A Fil,
D S Gahle,
D Moulton,
O Myatra,
A Perek,
C Theiler,
M Wensing
Abstract:
In this work we provide experimental insights into the impact of plasma-molecule interactions on the target ion flux decrease during divertor detachment achieved through a core density ramp in the TCV tokamak. Our improved analysis of the hydrogen Balmer series shows that plasma-molecule processes are strongly contributing to the Balmer series intensities and substantially alter the divertor detac…
▽ More
In this work we provide experimental insights into the impact of plasma-molecule interactions on the target ion flux decrease during divertor detachment achieved through a core density ramp in the TCV tokamak. Our improved analysis of the hydrogen Balmer series shows that plasma-molecule processes are strongly contributing to the Balmer series intensities and substantially alter the divertor detachment particle balance. We find that Molecular Activated Recombination (MAR) ion sinks from $H_2^+$ and/or $H^-$ are a factor $\sim$ 5 larger than Electron-Ion Recombination (EIR) and are a significant contributor to the observed reduction in the outer divertor ion target flux. Molecular Activated Ionisation (MAI) may also be significant during detachment. Plasma-molecule interactions enhance the Balmer line series emission strongly near the target as detachment proceeds. This indicates enhancements of the Lyman series, potentially affecting power balance in the divertor. As those enhancements vary spatially in the divertor and are different for different transitions, they are expected to result in a separation of the $Lyβ$ and $Lyα$ emission regions. This may have implications for the treatment and diagnosis of divertor opacity. The demonstrated enhancement of the Balmer series through plasma-molecule processes potentially poses a challenge to using the Balmer series for understanding and diagnosing detachment based only on atom-plasma processes.
△ Less
Submitted 17 February, 2021; v1 submitted 1 August, 2020;
originally announced August 2020.
-
The role of mechanics in the growth and homeostasis of the intestinal crypt
Authors:
Axel A. Almet,
Helen M. Byrne,
Philip K. Maini,
Derek E. Moulton
Abstract:
We present a mechanical model of tissue homeostasis that is specialised to the intestinal crypt. Growth and deformation of the crypt, idealised as a line of cells on a substrate, are modelled using morphoelastic rod theory. Alternating between Lagrangian and Eulerian mechanical descriptions enables us precisely to characterise the dynamic nature of tissue homeostasis, whereby the proliferative str…
▽ More
We present a mechanical model of tissue homeostasis that is specialised to the intestinal crypt. Growth and deformation of the crypt, idealised as a line of cells on a substrate, are modelled using morphoelastic rod theory. Alternating between Lagrangian and Eulerian mechanical descriptions enables us precisely to characterise the dynamic nature of tissue homeostasis, whereby the proliferative structure and morphology are static in the Eulerian frame, but there is active migration of Lagrangian material points out of the crypt. Assuming mechanochemical growth, we identify the necessary conditions for homeostasis, reducing the full, time-dependent system to a static boundary value problem characterising a spatially heterogeneous "treadmilling" state. We extract essential features of crypt homeostasis, such as the morphology, the proliferative structure, the migration velocity, and the sloughing rate. We also derive closed-form solutions for growth and sloughing dynamics in homeostasis, and show that mechanochemical growth is sufficient to generate the observed proliferative structure of the crypt. Key to this is the concept of threshold-dependent mechanical feedback, that regulates an established Wnt signal for biochemical growth. Numerical solutions demonstrate the importance of crypt morphology on homeostatic growth, migration, and sloughing, and highlight the value of this framework as a foundation for studying the role of mechanics in homeostasis.
△ Less
Submitted 30 May, 2020;
originally announced June 2020.
-
The role of topology and mechanics in uniaxially growing cell networks
Authors:
Alexander Erlich,
Gareth W. Jones,
Françoise Tisseur,
Derek E. Moulton,
Alain Goriely
Abstract:
In biological systems, the growth of cells, tissues, and organs is influenced by mechanical cues. Locally, cell growth leads to a mechanically heterogeneous environment as cells pull and push their neighbors in a cell network. Despite this local heterogeneity, at the tissue level, the cell network is remarkably robust, as it is not easily perturbed by changes in the mechanical environment or the n…
▽ More
In biological systems, the growth of cells, tissues, and organs is influenced by mechanical cues. Locally, cell growth leads to a mechanically heterogeneous environment as cells pull and push their neighbors in a cell network. Despite this local heterogeneity, at the tissue level, the cell network is remarkably robust, as it is not easily perturbed by changes in the mechanical environment or the network connectivity. Through a network model, we relate global tissue structure (i.e. the cell network topology) and local growth mechanisms (growth laws) to the overall tissue response. Within this framework, we investigate the two main mechanical growth laws that have been proposed: stress-driven or strain-driven growth. We show that in order to create a robust and stable tissue environment, networks with predominantly series connections are naturally driven by stress-driven growth, whereas networks with predominantly parallel connections are associated with strain-driven growth.
△ Less
Submitted 10 January, 2020; v1 submitted 25 April, 2019;
originally announced April 2019.
-
A computational framework for the morpho-elastic development of molluskan shells by surface and volume growth
Authors:
Shiva Rudraraju,
Derek E. Moulton,
Régis Chirat,
Alain Goriely,
Krishna Garikipati
Abstract:
Mollusk shells are an ideal model system for understanding the morpho-elastic basis of morphological evolution of invertebrates' exoskeletons. During the formation of the shell, the mantle tissue secretes proteins and minerals that calcify to form a new incremental layer of the exoskeleton. Most of the existing literature on the morphology of mollusks is descriptive. The mathematical understanding…
▽ More
Mollusk shells are an ideal model system for understanding the morpho-elastic basis of morphological evolution of invertebrates' exoskeletons. During the formation of the shell, the mantle tissue secretes proteins and minerals that calcify to form a new incremental layer of the exoskeleton. Most of the existing literature on the morphology of mollusks is descriptive. The mathematical understanding of the underlying coupling between pre-existing shell morphology, de novo surface deposition and morpho-elastic volume growth is at a nascent stage, primarily limited to reduced geometric representations. Here, we propose a general, three-dimensional computational framework coupling pre-existing morphology, incremental surface growth by accretion, and morpho-elastic volume growth. We exercise this framework by applying it to explain the stepwise morphogenesis of seashells during growth: new material surfaces are laid down by accretive growth on the mantle whose form is determined by its morpho-elastic growth. Calcification of the newest surfaces extends the shell as well as creates a new scaffold that constrains the next growth step. We study the effects of surface and volumetric growth rates, and of previously deposited shell geometries on the resulting modes of mantle deformation, and therefore of the developing shell's morphology. Connections are made to a range of complex shells ornamentations.
△ Less
Submitted 8 July, 2019; v1 submitted 2 January, 2019;
originally announced January 2019.
-
The role of particle, energy and momentum losses in 1D simulations of divertor detachment
Authors:
B D Dudson,
J Allen,
T Body,
B Chapman,
C Lau,
L Townley,
D Moulton,
J Harrison,
B Lipschultz
Abstract:
A new 1D divertor plasma code, SD1D, has been used to examine the role of recombination, radiation, and momentum exchange in detachment. Neither momentum or power losses by themselves are found to be sufficient to produce a reduction in target ion flux in detachment (flux rollover); radiative power losses are required to a) limit and reduce the ionization source and b) access low-target temperatur…
▽ More
A new 1D divertor plasma code, SD1D, has been used to examine the role of recombination, radiation, and momentum exchange in detachment. Neither momentum or power losses by themselves are found to be sufficient to produce a reduction in target ion flux in detachment (flux rollover); radiative power losses are required to a) limit and reduce the ionization source and b) access low-target temperature, T_target, conditions for volumetric momentum losses. Recombination is found to play little role at flux rollover, but as T_target drops to temperatures around 1eV, it becomes a strong ion sink. In the case where radiative losses are dominated by hydrogen, the detachment threshold is identified as a minimum gradient of the energy cost per ionisation with respect to T_target. This is also linked to thresholds in T_target and in the ratio of upstream pressure to power flux.
A system of determining the detached condition is developed such that the divertor solution at a given T_target (or lack of one) is determined by the simultaneous solution of two equations for target ion current - one dependent on power losses and the other on momentum. Depending on the detailed momentum and power loss dependence on temperature there are regions of T_target where there is no solution and the plasma 'jumps' from high to low T_target states. The novel analysis methods developed here provide an intuitive way to understand complex detachment phenomena, and can potentially be used to predict how changes in the seeding impurity used or recycling aspects of the divertor can be utilised to modify the development of detachment.
△ Less
Submitted 21 December, 2018;
originally announced December 2018.
-
Pull-in dynamics of overdamped microbeams
Authors:
Michael Gomez,
Dominic Vella,
Derek E. Moulton
Abstract:
We study the dynamics of MEMS microbeams undergoing electrostatic pull-in. At DC voltages close to the pull-in voltage, experiments and numerical simulations have reported `bottleneck' behaviour in which the transient dynamics slow down considerably. This slowing down is highly sensitive to external forces, and so has widespread potential for applications that use pull-in time as a sensing mechani…
▽ More
We study the dynamics of MEMS microbeams undergoing electrostatic pull-in. At DC voltages close to the pull-in voltage, experiments and numerical simulations have reported `bottleneck' behaviour in which the transient dynamics slow down considerably. This slowing down is highly sensitive to external forces, and so has widespread potential for applications that use pull-in time as a sensing mechanism, including high-resolution accelerometers and pressure sensors. Previously, the bottleneck phenomenon has only been understood using lumped mass-spring models that do not account for effects such as variable residual stress and different boundary conditions. We extend these studies to incorporate the beam geometry, developing an asymptotic method to analyse the pull-in dynamics. We attribute bottleneck behaviour to critical slowing down near the pull-in transition, and we obtain a simple expression for the pull-in time in terms of the beam parameters and external damping coefficient. This expression is found to agree well with previous experiments and numerical simulations that incorporate more realistic models of squeeze film damping, and so provides a useful design rule for sensing applications. We also consider the accuracy of a single-mode approximation of the microbeam equations --- an approach that is commonly used to make analytical progress, without systematic investigation of its accuracy. By comparing to our bottleneck analysis, we identify the factors that control the error of this approach, and we demonstrate that this error can indeed be very small.
△ Less
Submitted 15 August, 2018;
originally announced August 2018.
-
Are homeostatic states stable? Dynamical stability in morphoelasticity
Authors:
Alexander Erlich,
Derek E. Moulton,
Alain Goriely
Abstract:
Biological growth is often driven by mechanical cues, such as changes in external pressure or tensile loading. Moreover, it is well known that many living tissues actively maintain a preferred level of mechanical internal stress, called the mechanical homeostasis. The tissue-level feedback mechanism by which changes of the local mechanical stresses affect growth is called a growth law within the t…
▽ More
Biological growth is often driven by mechanical cues, such as changes in external pressure or tensile loading. Moreover, it is well known that many living tissues actively maintain a preferred level of mechanical internal stress, called the mechanical homeostasis. The tissue-level feedback mechanism by which changes of the local mechanical stresses affect growth is called a growth law within the theory of morphoelasticity, a theory for understanding the coupling between mechanics and geometry in growing and evolving biological materials. The goal of this article is to develop mathematical techniques to analyze growth laws and to explore issues of heterogeneity and growth stability. We discuss the growth dynamics of tubular structures, which are very common in biology (e.g. arteries, plant stems, airways) and model the homeostasis-driven growth dynamics of tubes which produces spatially inhomogeneous residual stress. We show that the stability of the homeostatic state depends nontrivially on the anisotropy of the growth response. The key role of anisotropy may provide a foundation for experimental testing of homeostasis-driven growth laws.
△ Less
Submitted 22 April, 2018;
originally announced April 2018.
-
Post-buckling behaviour of a growing elastic rod
Authors:
Axel A. Almet,
Helen M. Byrne,
Philip K. Maini,
Derek E. Moulton
Abstract:
We consider mechanically-induced pattern formation within the framework of a growing, planar, elastic rod attached to an elastic foundation. Through a combination of weakly nonlinear analysis and numerical methods, we identify how the shape and type of buckling (super- or subcritical) depend on material parameters, and a complex phase-space of transition from super-to subcritical is uncovered. We…
▽ More
We consider mechanically-induced pattern formation within the framework of a growing, planar, elastic rod attached to an elastic foundation. Through a combination of weakly nonlinear analysis and numerical methods, we identify how the shape and type of buckling (super- or subcritical) depend on material parameters, and a complex phase-space of transition from super-to subcritical is uncovered. We then examine the effect of heterogeneity on buckling and post-buckling behaviour, in the context of a heterogeneous substrate adhesion, elastic stiffness, or growth. We show how the same functional form of heterogeneity in different properties is manifest in a vastly differing post-buckled shape. A form of inverse problem is then considered: whether different functional forms could produce the same shape, and if this could be detected. Finally, a fourth form of heterogeneity, an imperfect foundation, is incorporated and shown to have a more dramatic impact on the buckling instability, a difference that can be qualitatively understood via the weakly nonlinear analysis.
△ Less
Submitted 29 May, 2020; v1 submitted 20 March, 2018;
originally announced March 2018.
-
Scaling Structured Multigrid to 500K+ Cores through Coarse-Grid Redistribution
Authors:
Andrew Reisner,
Luke N. Olson,
J. David Moulton
Abstract:
The efficient solution of sparse, linear systems resulting from the discretization of partial differential equations is crucial to the performance of many physics-based simulations. The algorithmic optimality of multilevel approaches for common discretizations makes them a good candidate for an efficient parallel solver. Yet, modern architectures for high-performance computing systems continue to…
▽ More
The efficient solution of sparse, linear systems resulting from the discretization of partial differential equations is crucial to the performance of many physics-based simulations. The algorithmic optimality of multilevel approaches for common discretizations makes them a good candidate for an efficient parallel solver. Yet, modern architectures for high-performance computing systems continue to challenge the parallel scalability of multilevel solvers. While algebraic multigrid methods are robust for solving a variety of problems, the increasing importance of data locality and cost of data movement in modern architectures motivates the need to carefully exploit structure in the problem.
Robust logically structured variational multigrid methods, such as Black Box Multigrid (BoxMG), maintain structure throughout the multigrid hierarchy. This avoids indirection and increased coarse-grid communication costs typical in parallel algebraic multigrid. Nevertheless, the parallel scalability of structured multigrid is challenged by coarse-grid problems where the overhead in communication dominates computation. In this paper, an algorithm is introduced for redistributing coarse-grid problems through incremental agglomeration. Guided by a predictive performance model, this algorithm provides robust redistribution decisions for structured multilevel solvers.
A two-dimensional diffusion problem is used to demonstrate the significant gain in performance of this algorithm over the previous approach that used agglomeration to one processor. In addition, the parallel scalability of this approach is demonstrated on two large-scale computing systems, with solves on up to 500K+ cores.
△ Less
Submitted 6 March, 2018;
originally announced March 2018.
-
Delayed pull-in transitions in overdamped MEMS devices
Authors:
Michael Gomez,
Derek E. Moulton,
Dominic Vella
Abstract:
We consider the dynamics of overdamped MEMS devices undergoing the pull-in instability. Numerous previous experiments and numerical simulations have shown a significant increase in the pull-in time under DC voltages close to the pull-in voltage. Here the transient dynamics slow down as the device passes through a meta-stable or bottleneck phase, but this slowing down is not well understood quantit…
▽ More
We consider the dynamics of overdamped MEMS devices undergoing the pull-in instability. Numerous previous experiments and numerical simulations have shown a significant increase in the pull-in time under DC voltages close to the pull-in voltage. Here the transient dynamics slow down as the device passes through a meta-stable or bottleneck phase, but this slowing down is not well understood quantitatively. Using a lumped parallel-plate model, we perform a detailed analysis of the pull-in dynamics in this regime. We show that the bottleneck phenomenon is a type of critical slowing down arising from the pull-in transition. This allows us to show that the pull-in time obeys an inverse square-root scaling law as the transition is approached; moreover we determine an analytical expression for this pull-in time. We then compare our prediction to a wide range of pull-in time data reported in the literature, showing that the observed slowing down is well captured by our scaling law, which appears to be generic for overdamped pull-in under DC loads. This realization provides a useful design rule with which to tune dynamic response in applications, including state-of-the-art accelerometers and pressure sensors that use pull-in time as a sensing mechanism. We also propose a method to estimate the pull-in voltage based only on data of the pull-in times.
△ Less
Submitted 1 December, 2017; v1 submitted 28 October, 2017;
originally announced October 2017.
-
Interpretation of scrape-off layer profile evolution and first-wall ion flux statistics on JET using a stochastic framework based on filamentary motion
Authors:
N. R. Walkden,
A. Wynn,
F. Militello,
B. Lipschultz,
G. Matthews,
C. Guillemaut,
J. Harrison,
D. Moulton,
JET Contributors
Abstract:
This paper presents the use of a novel modelling technique based around intermittent transport due to filament motion, to interpret experimental profile and fluctuation data in the scrape-off layer (SOL) of JET during the onset and evolution of a density profile shoulder. A baseline case is established, prior to shoulder formation, and the stochastic model is shown to be capable of simultaneously…
▽ More
This paper presents the use of a novel modelling technique based around intermittent transport due to filament motion, to interpret experimental profile and fluctuation data in the scrape-off layer (SOL) of JET during the onset and evolution of a density profile shoulder. A baseline case is established, prior to shoulder formation, and the stochastic model is shown to be capable of simultaneously matching the time averaged profile measurement as well as the PDF shape and autocorrelation function from the ion-saturation current time series at the outer wall. Aspects of the stochastic model are then varied with the aim of producing a profile shoulder with statistical measurements consistent with experiment. This is achieved through a strong localised reduction in the density sink acting on the filaments within the model. The required reduction of the density sink occurs over a highly localised region with the timescale of the density sink increased by a factor of 25. This alone is found to be insufficient to model the expansion and flattening of the shoulder region as the density increases, which requires additional changes within the stochastic model. An example is found which includes both a reduction in the density sink and filament acceleration and provides a consistent match to the experimental data as the shoulder expands, though the uniqueness of this solution can not be guaranteed. Within the context of the stochastic model, this implies that the localised reduction in the density sink can trigger shoulder formation, but additional physics is required to explain the subsequent evolution of the profile.
△ Less
Submitted 5 June, 2017;
originally announced June 2017.
-
Universality of the ion flux to the JET outer wall
Authors:
N. R. Walkden,
A. Wynn,
F. Militello,
B. Lipschultz,
G. Matthews,
C. Guillemaut,
J. Harrison,
D. Moulton,
JET Contributors
Abstract:
Universality in the ion flux to the JET outer-wall is observed in outerwall limiter mounted Langmuir probe (OLP) time-series across a large range of plasma current and line-averaged density during Ohmically heated horizontal target L-mode plasmas. The mean, M, and the standard deviation, sigma, of the ion-saturation current measured by the OLP show systematic variation with plasma current and dens…
▽ More
Universality in the ion flux to the JET outer-wall is observed in outerwall limiter mounted Langmuir probe (OLP) time-series across a large range of plasma current and line-averaged density during Ohmically heated horizontal target L-mode plasmas. The mean, M, and the standard deviation, sigma, of the ion-saturation current measured by the OLP show systematic variation with plasma current and density. Both increase as either plasma current decreases and/or density increases. Upon renormalization, achieved by subtraction of M and rescaling by sigma, the probability distribution functions (PDFs) of each signal collapse approximately onto a single curve. The shape of the curve deviates from a distribution in the tail of the PDF and is better described by a log-normal distribution. The collapse occurs over 4 decades of the ordinate which, given the wide parameter space over which the data spans, is a strong indication of universality.
△ Less
Submitted 26 July, 2016;
originally announced July 2016.
-
On the velocity space discretization for the Vlasov-Poisson system: comparison between Hermite spectral and Particle-in-Cell methods. Part 2: fully-implicit scheme
Authors:
E. Camporeale,
G. L. Delzanno,
B. K. Bergen,
J. D. Moulton
Abstract:
We describe a spectral method for the numerical solution of the Vlasov-Poisson system where the velocity space is decomposed by means of an Hermite basis, and the configuration space is discretized via a Fourier decomposition. The novelty of our approach is an implicit time discretization that allows exact conservation of charge, momentum and energy. The computational efficiency and the cost-effec…
▽ More
We describe a spectral method for the numerical solution of the Vlasov-Poisson system where the velocity space is decomposed by means of an Hermite basis, and the configuration space is discretized via a Fourier decomposition. The novelty of our approach is an implicit time discretization that allows exact conservation of charge, momentum and energy. The computational efficiency and the cost-effectiveness of this method are compared to the fully-implicit PIC method recently introduced by Markidis and Lapenta (2011) and Chen et al. (2011). The following examples are discussed: Langmuir wave, Landau damping, ion-acoustic wave, two-stream instability. The Fourier-Hermite spectral method can achieve solutions that are several orders of magnitude more accurate at a fraction of the cost with respect to PIC. This paper concludes the study presented in Camporeale et al. (2013) where the same method has been described for a semi-implicit time discretization, and was compared against an explicit PIC.
△ Less
Submitted 17 December, 2013;
originally announced December 2013.
-
CPIC: a Curvilinear Particle-In-Cell code for plasma-material interaction studies
Authors:
Gian Luca Delzanno,
Enrico Camporeale,
J. David Moulton,
Joseph E. Borovsky,
Elizabeth A. MacDonald,
Michelle F. Thomsen
Abstract:
We describe a new electrostatic Particle-In-Cell (PIC) code in curvilinear geometry called Curvilinear PIC (CPIC). The code models the microscopic (kinetic) evolution of a plasma with the PIC method, coupled with an adaptive computational grid that can conform to arbitrarily shaped domains. CPIC is particularly suited for multiscale problems associated with the interaction of complex objects with…
▽ More
We describe a new electrostatic Particle-In-Cell (PIC) code in curvilinear geometry called Curvilinear PIC (CPIC). The code models the microscopic (kinetic) evolution of a plasma with the PIC method, coupled with an adaptive computational grid that can conform to arbitrarily shaped domains. CPIC is particularly suited for multiscale problems associated with the interaction of complex objects with plasmas. A map is introduced between the physical space and the logical space, where the grid is uniform and Cartesian. In CPIC, most operations are performed in logical space. CPIC was designed following criteria of versatility, robustness and performance. Its main features are the use of structured meshes, a scalable field solver based on the black box multigrid algorithm and a hybrid mover, where particles' position is in logical space while the velocity is in physical space. Test examples involving the interaction of a plasma with material boundaries are presented.
△ Less
Submitted 10 November, 2013;
originally announced November 2013.
-
On the velocity space discretization for the Vlasov-Poisson system: comparison between Hermite spectral and Particle-in-Cell methods. Part 1: semi-implicit scheme
Authors:
Enrico Camporeale,
Gian Luca Delzanno,
Benjamin K. Bergen,
J. David Moulton
Abstract:
We discuss a spectral method for the numerical solution of the Vlasov-Poisson system where the velocity space is decomposed by means of an Hermite basis. We describe a semi-implicit time discretization that extends the range of numerical stability relative to an explicit scheme. We also introduce and discuss the effects of an artificial collisional operator, which is necessary to take care of the…
▽ More
We discuss a spectral method for the numerical solution of the Vlasov-Poisson system where the velocity space is decomposed by means of an Hermite basis. We describe a semi-implicit time discretization that extends the range of numerical stability relative to an explicit scheme. We also introduce and discuss the effects of an artificial collisional operator, which is necessary to take care of the velocity space filamentation problem, unavoidable in collisionless plasmas. The computational efficiency and the cost-effectiveness of this method are compared to a Particle-in-Cell (PIC) method in the case of a two-dimensional phase space. The following examples are discussed: Langmuir wave, Landau damping, ion-acoustic wave, two-stream instability, and plasma echo. The Hermite spectral method can achieve solutions that are several orders of magnitude more accurate (at a fraction of the cost) with respect to the PIC method.
△ Less
Submitted 17 December, 2013; v1 submitted 8 November, 2013;
originally announced November 2013.
