-
Determining angle of arrival of radio frequency fields using subwavelength, amplitude-only measurements of standing waves in a Rydberg atom sensor
Authors:
Rajavardhan Talashila,
William J. Watterson,
Benjamin L. Moser,
Joshua A. Gordon,
Alexandra B. Artusio-Glimpse,
Nikunjkumar Prajapati,
Noah Schlossberger,
Matthew T. Simons,
Christopher L. Holloway
Abstract:
Deep subwavelength RF imaging with atomic Rydberg sensors has overcome fundamental limitations of traditional antennas and enabled ultra-wideband detection of omni-directional time varying fields all in a compact form factor. However, in most applications, Rydberg sensors require the use of a secondary strong RF reference field to serve as a phase reference. Here, we demonstrate a new type of Rydb…
▽ More
Deep subwavelength RF imaging with atomic Rydberg sensors has overcome fundamental limitations of traditional antennas and enabled ultra-wideband detection of omni-directional time varying fields all in a compact form factor. However, in most applications, Rydberg sensors require the use of a secondary strong RF reference field to serve as a phase reference. Here, we demonstrate a new type of Rydberg sensor for angle-of-arrival (AoA) sensing which utilizes subwavelength imaging of standing wave fields. By placing a metallic plate within the Rydberg cell, we can determine the AoA independent of the strength of incoming RF field and without requiring a secondary strong RF phase reference field. We perform precision AoA measurements with a robotic antenna positioning system for 4.2, 5.0, and 5.7 GHz signals and demonstrate a 1.7 deg polar angular resolution from 0 deg to 60 deg AoA and 4.1 deg over all possible angles.
△ Less
Submitted 13 February, 2025;
originally announced February 2025.
-
Role of Poloidal $\mathbf{E}\times\mathbf{B}$ Drift in Divertor Heat Transport in DIII-D
Authors:
A. E. Järvinen,
S. L. Allen,
A. W. Leonard,
A. G. McLean,
A. L. Moser,
T. D. Rognlien,
C. M. Samuell
Abstract:
Simulations for DIII-D high confinement mode plasmas with the multifluid code UEDGE show a strong role of poloidal $\mathbf{E}\times\mathbf{B}$ drifts on divertor heat transport, challenging the paradigm of conduction limited scrape-off layer (SOL) transport. While simulations with reduced drift magnitude are well aligned with the assumption that electron heat conduction dominates the SOL heat tra…
▽ More
Simulations for DIII-D high confinement mode plasmas with the multifluid code UEDGE show a strong role of poloidal $\mathbf{E}\times\mathbf{B}$ drifts on divertor heat transport, challenging the paradigm of conduction limited scrape-off layer (SOL) transport. While simulations with reduced drift magnitude are well aligned with the assumption that electron heat conduction dominates the SOL heat transport, simulations with drifts predict that the poloidal convective $\mathbf{E}\times\mathbf{B}$ heat transport dominates over electron heat conduction in both attached and detached conditions. Since poloidal $\mathbf{E}\times\mathbf{B}$ flow propagates across magnetic field lines, poloidal transport with shallow magnetic pitch angles can reach values that are of the same order as would be provided by sonic flows parallel to the field lines. These flows can lead to strongly convection dominated divertor heat transport, increasing the poloidal volume of radiative power front, consistent with previous measurements at DIII-D. Due to these convective flows, the Lengyel integral approach, assuming zero convective fraction, is expected to provide a pessimistic estimate for radiative capability of impurities in the divertor. For the DIII-D simulations shown here, the Lengyel integral approach underestimates the radiated power by a factor of 6, indicating that for reliable DIII-D divertor power exhaust predictions, full 2D calculations, including drifts, would be necessary.
△ Less
Submitted 19 September, 2019;
originally announced September 2019.
-
Observation of Rayleigh-Taylor-Instability Evolution in a Plasma with Magnetic and Viscous Effects
Authors:
Colin S. Adams,
Auna L. Moser,
Scott C. Hsu
Abstract:
We present time-resolved observations of Rayleigh--Taylor-instability (RTI) evolution at the interface between an unmagnetized plasma jet colliding with a stagnated, magnetized plasma. The observed instability growth time ($\sim 10$~$μ$s) is consistent with the estimated linear RTI growth rate calculated using experimentally inferred values of density ($\sim 10^{14}$~cm$^{-3}$) and deceleration (…
▽ More
We present time-resolved observations of Rayleigh--Taylor-instability (RTI) evolution at the interface between an unmagnetized plasma jet colliding with a stagnated, magnetized plasma. The observed instability growth time ($\sim 10$~$μ$s) is consistent with the estimated linear RTI growth rate calculated using experimentally inferred values of density ($\sim 10^{14}$~cm$^{-3}$) and deceleration ($\sim 10^9$~m/s$^2$). The observed mode wavelength ($\gtrsim 1$~cm) nearly doubles within a linear growth time. Theoretical estimates of magnetic and viscous stabilization and idealized magnetohydrodynamic simulations including a physical viscosity model both suggest that the observed instability evolution is subject to magnetic and/or viscous effects.
△ Less
Submitted 26 October, 2015; v1 submitted 18 December, 2014;
originally announced December 2014.
-
Experimental characterization of a transition from collisionless to collisional interaction between head-on-merging supersonic plasma jets
Authors:
Auna L. Moser,
Scott C. Hsu
Abstract:
We present results from experiments on the head-on merging of two supersonic plasma jets in an initially collisionless regime for the counter-streaming ions. The plasma jets are of either an argon/impurity or hydrogen/impurity mixture and are produced by pulsed-power-driven railguns. Based on time- and space-resolved fast-imaging, multi-chord interferometry, and survey-spectroscopy measurements of…
▽ More
We present results from experiments on the head-on merging of two supersonic plasma jets in an initially collisionless regime for the counter-streaming ions. The plasma jets are of either an argon/impurity or hydrogen/impurity mixture and are produced by pulsed-power-driven railguns. Based on time- and space-resolved fast-imaging, multi-chord interferometry, and survey-spectroscopy measurements of the overlapping region between the merging jets, we observe that the jets initially interpenetrate, consistent with calculated inter-jet ion collision lengths, which are long. As the jets interpenetrate, a rising mean-charge state causes a rapid decrease in the inter-jet ion collision length. Finally, the interaction becomes collisional and the jets stagnate, eventually producing structures consistent with collisional shocks. These experimental observations can aid in the validation of plasma collisionality and ionization models for plasmas with complex equations of state.
△ Less
Submitted 11 May, 2015; v1 submitted 3 December, 2014;
originally announced December 2014.
-
Plasma cleaning of ITER first mirrors in magnetic field
Authors:
Lucas Moser,
Roland Steiner,
Frank Leipold,
Roger Reichle,
Laurent Marot,
Ernst Meyer
Abstract:
To avoid reflectivity losses in ITER optical diagnostic systems, plasma sputtering of metallic First Mirrors is foreseen in order to remove deposits coming from the main wall (mainly beryllium and tungsten). Therefore plasma cleaning has to work on large mirrors (up to a size of 200*300 mm) and under the influence of strong magnetic fields (several Tesla). This work presents the results of plasma…
▽ More
To avoid reflectivity losses in ITER optical diagnostic systems, plasma sputtering of metallic First Mirrors is foreseen in order to remove deposits coming from the main wall (mainly beryllium and tungsten). Therefore plasma cleaning has to work on large mirrors (up to a size of 200*300 mm) and under the influence of strong magnetic fields (several Tesla). This work presents the results of plasma cleaning of aluminium and aluminium oxide (used as beryllium proxy) deposited on molybdenum mirrors. Using radio frequency (13.56 MHz) argon plasma, the removal of a 260 nm mixed aluminium/aluminium oxide film deposited by magnetron sputtering on a mirror (98 mm diameter) was demonstrated. 50 nm of pure aluminium oxide were removed from test mirrors (25 mm diameter) in a magnetic field of 0.35 T for various angles between the field lines and the mirrors surfaces. The cleaning efficiency was evaluated by performing reflectivity measurements, Scanning Electron Microscopy and X-ray Photoelectron Spectroscopy.
△ Less
Submitted 24 November, 2014;
originally announced November 2014.
-
Laboratory plasma physics experiments using merging supersonic plasma jets
Authors:
S. C. Hsu,
A. L. Moser,
E. C. Merritt,
C. S. Adams,
J. P. Dunn,
S. Brockington,
A. Case,
M. Gilmore,
A. G. Lynn,
S. J. Messer,
F. D. Witherspoon
Abstract:
We describe a laboratory plasma physics experiment at Los Alamos National Laboratory that uses two merging supersonic plasma jets formed and launched by pulsed-power-driven rail guns. The jets can be formed using any atomic species or mixture available in a compressed-gas bottle and have the following nominal initial parameters at the railgun nozzle exit: $n_e\approx n_i \sim 10^{16}$ cm$^{-3}$,…
▽ More
We describe a laboratory plasma physics experiment at Los Alamos National Laboratory that uses two merging supersonic plasma jets formed and launched by pulsed-power-driven rail guns. The jets can be formed using any atomic species or mixture available in a compressed-gas bottle and have the following nominal initial parameters at the railgun nozzle exit: $n_e\approx n_i \sim 10^{16}$ cm$^{-3}$, $T_e \approx T_i \approx 1.4$ eV, $V_{\rm jet}\approx 30$-100 km/s, mean charge $\bar{Z}\approx 1$, sonic Mach number $M_s\equiv V_{\rm jet}/C_s>10$, jet diameter $=5$ cm, and jet length $\approx 20$ cm. Experiments to date have focused on the study of merging-jet dynamics and the shocks that form as a result of the interaction, in both collisional and collisionless regimes with respect to the inter-jet classical ion mean free path, and with and without an applied magnetic field. However, many other studies are also possible, as discussed in this paper.
△ Less
Submitted 21 April, 2015; v1 submitted 1 August, 2014;
originally announced August 2014.
-
Observation of ionization-mediated transition from collisionless interpenetration to collisional stagnation during merging of two supersonic plasmas
Authors:
Auna L. Moser,
Scott C. Hsu
Abstract:
We present space- and time-resolved experimental data of head-on-merging, supersonic plasma jets (of an argon/impurity mixture) in an initially collisionless regime for counter-streaming ions. The merging begins with collisionless interpenetration followed by a transition to collisional stagnation. The transition occurs due to an experimentally inferred rising mean-ionization level, which rapidly…
▽ More
We present space- and time-resolved experimental data of head-on-merging, supersonic plasma jets (of an argon/impurity mixture) in an initially collisionless regime for counter-streaming ions. The merging begins with collisionless interpenetration followed by a transition to collisional stagnation. The transition occurs due to an experimentally inferred rising mean-ionization level, which rapidly reduces the counter-streaming ion-ion mean free path. The measurements demonstrate a specific mechanism by which a collisionless interaction transitions to a collisional one and constrain collisionality and ionization models for plasmas with complex equation of state.
△ Less
Submitted 30 April, 2015; v1 submitted 9 May, 2014;
originally announced May 2014.
-
Experimental evidence for collisional shock formation via two obliquely merging supersonic plasma jets
Authors:
Elizabeth C. Merritt,
Auna L. Moser,
Scott C. Hsu,
Colin S. Adams,
John P. Dunn,
A. Miguel Holgado,
Mark A. Gilmore
Abstract:
We report spatially resolved measurements of the oblique merging of two supersonic laboratory plasma jets. The jets are formed and launched by pulsed-power-driven railguns using injected argon, and have electron density $\sim 10^{14}$ cm$^{-3}$, electron temperature $\approx 1.4$ eV, ionization fraction near unity, and velocity $\approx 40$ km/s just prior to merging. The jet merging produces a fe…
▽ More
We report spatially resolved measurements of the oblique merging of two supersonic laboratory plasma jets. The jets are formed and launched by pulsed-power-driven railguns using injected argon, and have electron density $\sim 10^{14}$ cm$^{-3}$, electron temperature $\approx 1.4$ eV, ionization fraction near unity, and velocity $\approx 40$ km/s just prior to merging. The jet merging produces a few-cm-thick stagnation layer, as observed in both fast-framing camera images and multi-chord interferometer data, consistent with collisional shock formation [E. C. Merritt et al., Phys. Rev. Lett. {\bf 111}, 085003 (2013)].
△ Less
Submitted 31 March, 2014; v1 submitted 25 November, 2013;
originally announced November 2013.
-
Experimental characterization of the stagnation layer between two obliquely merging supersonic plasma jets
Authors:
Elizabeth C. Merritt,
Auna L. Moser,
Scott C. Hsu,
John Loverich,
Mark Gilmore
Abstract:
We present spatially resolved measurements characterizing the stagnation layer between two obliquely merging supersonic plasma jets. Intra-jet collisionality is very high ($λ_{ii} \ll 1$mm), but the inter-jet ion-ion mean free paths are on the same order as the stagnation layer thickness (a few cm). Fast-framing camera images show a double-peaked emission profile transverse to the stagnation layer…
▽ More
We present spatially resolved measurements characterizing the stagnation layer between two obliquely merging supersonic plasma jets. Intra-jet collisionality is very high ($λ_{ii} \ll 1$mm), but the inter-jet ion-ion mean free paths are on the same order as the stagnation layer thickness (a few cm). Fast-framing camera images show a double-peaked emission profile transverse to the stagnation layer, with the central emission dip consistent with a density dip observed in the interferometer data. We demonstrate that our observations are consistent with collisional oblique shocks.
△ Less
Submitted 7 June, 2013; v1 submitted 23 March, 2013;
originally announced March 2013.
-
Experimental characterization of railgun-driven supersonic plasma jets motivated by high energy density physics applications
Authors:
S. C. Hsu,
E. C. Merritt,
A. L. Moser,
T. J. Awe,
S. J. E. Brockington,
J. S. Davis,
C. S. Adams,
A. Case,
J. T. Cassibry,
J. P. Dunn,
M. A. Gilmore,
A. G. Lynn,
S. J. Messer,
F. D. Witherspoon
Abstract:
We report experimental results on the parameters, structure, and evolution of high-Mach-number (M) argon plasma jets formed and launched by a pulsed-power-driven railgun. The nominal initial average jet parameters in the data set analyzed are density \approx 2 x 10^(16) cm^(-3), electron temperature \approx 1.4 eV, velocity \approx 30 km/s, M \approx 14, ionization fraction \approx 0.96, diameter…
▽ More
We report experimental results on the parameters, structure, and evolution of high-Mach-number (M) argon plasma jets formed and launched by a pulsed-power-driven railgun. The nominal initial average jet parameters in the data set analyzed are density \approx 2 x 10^(16) cm^(-3), electron temperature \approx 1.4 eV, velocity \approx 30 km/s, M \approx 14, ionization fraction \approx 0.96, diameter \approx 5 cm, and length \approx 20 cm. These values approach the range needed by the Plasma Liner Experiment (PLX), which is designed to use merging plasma jets to form imploding spherical plasma liners that can reach peak pressures of 0.1-1 Mbar at stagnation. As these jets propagate a distance of approximately 40 cm, the average density drops by one order of magnitude, which is at the very low end of the 8-160 times drop predicted by ideal hydrodynamic theory of a constant-M jet.
△ Less
Submitted 11 December, 2012; v1 submitted 21 October, 2012;
originally announced October 2012.
